As a Software Engineer at 1 digit technology Pvt, you are at the intersection of rapid innovation and scalable architecture. This role is pivotal to the company’s mission of simplifying insurance technology, where you will contribute to building robust backend systems, optimizing user-facing applications, and solving complex data challenges that impact real-world policyholders.
You will work in a fast-paced environment where technical agility is highly valued. Whether you are working on Microservices, Spring Boot integrations, or optimizing SQL queries, your primary objective is to deliver clean, efficient, and maintainable code. The role demands both a strong grasp of computer science fundamentals and a practical, problem-solving mindset to navigate the nuances of a high-growth startup ecosystem.
Preparation focus
editorialNo round sequence has been reported for this company, so work the categories below and confirm the format with your recruiter.
What to demonstrate
- Breadth across SQL, experimentation and product reasoning
- Ability to state assumptions before choosing a method
How to prepare
- Drill the practice exercises below and time yourself
- Prepare three quantified stories about decisions you drove
PracHub editorial advice for the preparation topics above.
One shared connection pool for every tenant and every query class
A single tenant with a large table and a missing index can occupy every connection with slow queries, and every other tenant then waits in connection acquisition -- a queue invisible in database metrics, because the database itself looks healthy while the application starves. Containment is bulkheads: separate pools or per-tenant concurrency caps for interactive requests, background jobs and exports, a statement timeout low enough that a pathological query dies before it accumulates, and an idle-in-transaction timeout so a stuck client cannot pin a connection and its locks indefinitely. One caveat worth knowing in advance: if a transaction-pooling proxy sits in front of the database, session-scoped behaviour changes, so session-level advisory locks and settings applied outside a transaction do not survive the way they do on a direct connection.
Checking a quota with a select and then writing
Under read-committed isolation, two concurrent transactions both observe a count below the limit and both insert, so the limit is exceeded by exactly the concurrency. Repeatable read does not rescue it either: it provides a stable snapshot, and this is write skew, which snapshot isolation permits by design. The options are serialisable isolation, which detects the conflict and aborts one transaction with a serialisation failure and therefore obliges the caller to retry; a single statement with the predicate inside the write; or a constraint that makes the surplus insert fail outright. The reason this pattern survives review is that it is correct in every test that runs one request at a time.
Issuing one query per row of a result set
Fetch related rows in a single batched query keyed by the ids you already hold, or join them into the original query. A per-row round trip multiplies network latency by the row count, and it looks perfectly fine against the ten rows in your development database.
Starting work without saying what you are about to spend time on
State the plan before executing it: the approach, roughly how long it will take, and what you intend to leave hand-waved. That gives the interviewer a chance to redirect you in ten seconds rather than watching you spend fifteen minutes on the wrong sub-problem.
Choose a category, try a prompt, then open its approach, worked solution or follow-up when you need it.
Parse and verify a timestamped multi-signature webhook header
An inbound webhook carries a signature header of at most 1 KiB shaped t=<unix seconds>,v1=<64 hex chars>, with up to five v1 values during secret rotation and possibly unknown scheme keys. You hold the raw request body bytes and the currently active signing secrets. Write the parser and the verifier: accept when any active secret reproduces a signature and the timestamp is within a five-minute tolerance in either direction, reject otherwise. Single left-to-right pass over the header, no regular expression. State what is inside the MAC and why.
Approach
- Parse in one scan: split on
,, then on the first=only, since a value may itself contain=under a future scheme. Accepttexactly once and treat a secondtas a reject rather than last-wins. Push everyv1onto a short list and ignore any other key, so av2can be introduced later without breaking this verifier. - Say what is signed: HMAC-SHA256 over the exact byte string
<t>.<raw body bytes>, yielding 32 bytes or 64 hex characters. The timestamp sits inside the MAC because otherwise an attacker replays yesterday's body with its still-valid signature and only has to edit the header timestamp. - Hash the bytes as received. Verifying against a re-serialised JSON body is the usual defect: key order, whitespace and number formatting all change the bytes while the parsed objects compare equal, so signatures fail for honest senders and the popular 'fix' is to stop checking.
- Compare in constant time over fixed-length digests. Decode the hex to 32 bytes, accumulate
acc |= a[i] ^ b[i]across the whole length, and testacc == 0at the end. Evaluate every candidate without an early exit; at five candidates that is five HMACs over the body, linear in body size and negligible beside the network. - Apply the tolerance as a two-sided bound, rejecting when
|now - t| > 300seconds. A sender whose clock runs ahead of yours is an ordinary case, and an unbounded future timestamp is a free replay window. - Complexity: O(L) over the header producing k candidates, plus k HMACs at O(|body|) each. Space is O(k) beyond the body itself. Do the cheap rejections, including the tolerance check, before any cryptography runs.
Follow-up
- The body is 40 MB. What changes about where you verify, and what can you do before the whole body has arrived?
- A customer reports that signatures fail for exactly the requests whose body contains a non-ASCII character. What is your first hypothesis?
- How do you rotate the signing secret with no failed deliveries, and how long do both secrets stay live?
Hold a tenant to a trailing sixty-second request limit
The gateway must hold each tenant to R requests in any trailing 60 seconds, in aggregate across three regions and every pod, within a budget of under 10 ms added p99. Peak is 30,000 requests/second across 200,000 active tenants, and traffic is heavily skewed toward a handful of them. Give an exact single-process algorithm with its amortised per-request cost and its memory per tenant, then a bounded-memory approximation and the worst-case overshoot it actually admits. Say what the distributed version does when the counter store is unreachable.
Approach
- Exact, single process: a per-tenant deque of request timestamps. On arrival, pop from the front while
front <= now - 60s, then admit if the remaining length is below R and push. Each timestamp is pushed once and popped once, so the cost is O(1) amortised. The O(R) version is the one that re-filters the whole deque on every request. - Quote the memory. R = 1,000 across 200,000 active tenants is up to 2 x 10^8 timestamps at 8 bytes, about 1.6 GB, and that is the worst case rather than the mean, because the long tail of small tenants holds almost nothing. Skew helps you here and hurts you in the sharding decision.
- Bounded alternative, with its real bound stated: a fixed 60-second counter is O(1) memory but admits close to 2R across a 60-second span straddling a boundary. The weighted two-bucket estimate,
prev * (60 - elapsed)/60 + cur, is better on smooth traffic but assumes the previous window's arrivals were uniform; an adversary packing them at the end of that window is undercounted and can still approach 2R. Say that rather than calling it exact. - Token bucket is the usual gateway answer and a different contract: O(1) state per tenant (
tokens,last_refill), a sustained rate, and a deliberate burst allowance equal to the bucket size. Choose it when a burst is acceptable and the log when the limit is contractual. - Distributed: the limit is per tenant in aggregate, so a local bucket of R/N per pod is wrong in both directions under skew. A tenant landing on one pod is throttled at R/N, and a tenant spread evenly across pods exceeds R. The shared check must be a single atomic round trip, one script or one increment-and-compare, never read-then-write, and it must fit inside the 10 ms p99 budget.
- Decide the unavailable case in advance and write it down. Failing open keeps the product up and lets a tenant exceed its limit for the duration; failing closed converts a counter-store outage into a full outage. Most gateways fail open on rate limits and closed on authorisation, and those are two separate decisions made separately.
Worked solution 25 min
- Implement the deque version and instrument the per-request pop count, then confirm total pops equal total pushes over a run.
- Generate a burst that places R requests in the last 100 ms of one minute and R more in the first 100 ms of the next.
- Run that burst through the exact deque, a fixed 60-second counter, and the weighted two-bucket estimate, recording admissions in the trailing 60 seconds at every instant.
- Size the memory as R x active tenants x 8 bytes at R = 1,000 and 200,000 tenants, and compare it against what a token bucket would need.
Follow-up
- One tenant sends 40% of all traffic. What does that do to a single counter key, and what do you shard on instead?
- Quotas rather than rate limits: the check is
select used; if used < limit then insert. Name the isolation level that still permits the overshoot, and the two fixes. - How do you return an accurate
Retry-Afterfrom the exact algorithm without a second scan?
Seal an hour under late data with bounded memory
Metering ingest reads 256 partitions at 10,000 to 40,000 events/second. Events carry occurred_at and ingested_at, and during a producer replay the gap between them is hours. Seal each UTC hour once no more than 50 parts per million of that hour's eventual quantity can still arrive, using memory that does not grow with the size of the replay. Define the watermark, the lateness parameter and how you measure it, the structure holding open hours, and the write that performs the seal. State what an idle partition does to your watermark.
Approach
- Two clocks, two jobs. Bucket by
occurred_at, because that is the hour the customer is billed for, and advance the watermark oningested_at, because that is what the fold has consumed and whatsource_max_ingested_atrecords. Conflating them is what makes late data invisible. - The global watermark is the min over partitions of each partition's committed
ingested_at, not the max: the fold is trustworthy only as far as the slowest partition. The consequence is that one idle partition pins the watermark forever and nothing seals, so an idle partition must promote its watermark to wall clock after a stated idle timeout, and that timeout becomes a correctness parameter, because a partition that is slow rather than idle gets sealed past. - Choose the lateness L from the measured distribution of
ingested_at - occurred_at, weighted by quantity rather than by event count. The target is 50 ppm of the hour's quantity, and a replay is rare in events while carrying disproportionate mass, so an event-weighted quantile picks an L that is comfortably wrong at exactly the moment it matters. - Measure that quantile in bounded memory. A Greenwald-Khanna summary gives epsilon-approximate quantiles in O((1/epsilon) log(epsilon n)) space; a t-digest costs more per merge but has relative error that tightens at the tails, which is the half of the distribution you are reading at p99.99. Keep a separate summary per tenant class, because one tenant's batch importer is not the population.
- Hold open hours in a min-heap keyed by
hour_start. When the watermark advances, pop every hour withhour_end + L < Wand seal it: O(log H_open) per advance and O(1) amortised per event to touch its bucket. Memory is open hours multiplied by distinct(tenant, workspace, sku)keys, so cap the number of simultaneously open hours and spill the oldest intousage_rollup_hourlyasstatus='open'with arevisionbump. While an hour is open the row is upsertable, so the store is your overflow. - The seal itself is a conditional write:
update ... set status='sealed', sealed_at=now() where status='open' returning .... Two sealers race on every restart, and the loser must see zero rows and stop rather than write a second value. After the seal, an event for that hour is not an upsert but an adjustment, andsource_max_ingested_atis what proves it arrived afterwards.
Follow-up
- A replay starts during the sealing window for a period you are about to close. What do you do, and what is the customer-visible consequence of each option?
- Your measured quantity-weighted p99.99 lateness is six hours and the invoice must be issued at 02:00 UTC on the first. How do you reconcile those two numbers?
- How would you detect that L has drifted before it costs you an hour's quantity?
Rebuild an hourly rollup with deduplication and late-arrival accounting
From usage_event (event_id, tenant_id, workspace_id, environment, sku, quantity numeric(20,6), idempotency_key, occurred_at, ingested_at), produce the values usage_rollup_hourly should hold for one tenant over one day: per (workspace_id, sku, hour_start) the deduplicated quantity_sum, event_count and source_max_ingested_at, bucketed by occurred_at. Duplicates share (tenant_id, idempotency_key). Also report, per hour, the running total across the day and the share of quantity that arrived more than two hours after the hour began. Write the query, and state which duplicates a daily unique index cannot catch.
Approach
- Deduplicate in its own CTE before any aggregation, because a SUM cannot be un-summed:
row_number() over (partition by tenant_id, idempotency_key order by ingested_at, event_id) = 1. Include the tiebreaker. Without it the surviving row is non-deterministic when two duplicates share an ingested_at, and a rollup described as deterministically recomputable then disagrees with itself between runs. - Bucket on occurred_at and nothing else, and pin the timezone explicitly.
date_trunc('hour', timestamptz)truncates in the session's TimeZone setting, so the same query run by a session set to a non-UTC zone buckets differently; use the three-argumentdate_trunc('hour', occurred_at, 'UTC')on PostgreSQL 16 or later, ordate_trunc('hour', occurred_at at time zone 'UTC') at time zone 'UTC'before that. Filterenvironment = 'production'explicitly, since metering covers three environments and billing covers one. - Aggregate to the grain with
sum(quantity),count(*)andmax(ingested_at). The last is not decoration: it is the watermark the row consumed up to, and without it there is no way to prove afterwards what a number did and did not include. - Compute the late share inside the dedup-and-aggregate step as a conditional aggregate,
sum(quantity) filter (where ingested_at > hour_start + interval '2 hours'), then divide by the hour's total. Compute the running total as a window over the already aggregated rows:sum(quantity_sum) over (partition by workspace_id, sku order by hour_start rows between unbounded preceding and current row). Running either over raw rows puts the duplicates back. - Answer the index question exactly. The unique constraint is on (ingested_day, tenant_id, idempotency_key), because a unique index on a partitioned table must contain the partition key. It therefore deduplicates only within one ingest day and admits a duplicate whose retry crosses midnight or whose replay runs a week later. That is why this CTE dedups across the whole window being recomputed, and why the dedup horizon is a correctness parameter rather than a retention cost.
- Keep the numeric type all the way through. quantity is numeric so the sums are exact; a cast to double precision anywhere in this pipeline reintroduces drift that surfaces only as a few unreconcilable cents per tenant per month, long after the query is out of anyone's mind.
Worked solution 40 min
- Generate a day of events for one tenant across three workspaces and two SKUs, inject 2% duplicates sharing an idempotency_key with a later ingested_at, and inject 1% whose ingested_at is six hours past occurred_at.
- Write the dedup CTE alone and confirm its row count drops by exactly the injected duplicate count.
- Aggregate and compare quantity_sum against a ground truth computed outside SQL from the generator's own records.
- Add the two window and filtered aggregates, and confirm the final hour's running total equals the ungrouped day total for each (workspace, sku).
- Run the whole query twice over static data and diff the two outputs.
- Re-run with the session TimeZone set to a non-UTC zone and confirm hour_start does not move.
Follow-up
- A dispute forces the same recompute over 40 days for one tenant. What changes about the dedup CTE's memory use and the chosen plan, and what would you do about it?
- Two runs a minute apart return different quantity_sum values for an hour that is already closed. Give two mechanisms that produce that, and the single query that distinguishes them.
- Express the same rollup incrementally so it does not re-scan the day each time the watermark advances. What does the incremental version stop being able to answer?
Decide which facts an invoice line copies instead of joining
invoice_line_item already denormalises tenant_id, which is reachable through invoice_id, and stores amount_minor even though quantity times unit_price_micros would recompute it. A reviewer asks you to normalise both away, and separately asks whether the tenant's legal name and billing address should be copied onto the invoice header. Decide each case. For every field you keep denormalised, name the read pattern or the invariant that justifies it, the anomaly the copy can develop, and the mechanism that prevents that anomaly here.
Approach
- Split the question into two kinds of copy, because they fail differently. A copy of a currently mutable fact is a cache: it drifts and needs invalidation. A copy of a fact frozen at write time is not a cache at all, it is the record of what happened, and normalising it away destroys information the source no longer holds.
- Keep tenant_id on the line. It costs 8 bytes, it leads every index on the table so no read is ever accidentally cross-tenant, and it turns a wrong join into an empty result rather than another tenant's money. Prevent the drift structurally: a unique constraint on invoice (invoice_id, tenant_id) plus a composite foreign key from the line on (invoice_id, tenant_id) makes a mismatched pair impossible, so the database enforces agreement instead of a code review.
- Keep amount_minor. Rounding must happen exactly once, at a named site, with a stated mode (half-even here). If readers recompute from quantity and unit_price_micros, every reader owns a rounding decision, and half-up and half-even diverge systematically across thousands of lines rather than cancelling out. A check constraint can bound the stored value but deliberately cannot re-derive it.
- Copy the legal name and billing address onto the invoice header, written once and never updated. The statement must show what was true when it was sealed, and the tenant record will change afterwards. This is a snapshot for the same reason
source_rollup_watermarkis stored per line: without it, nobody can reconstruct what the customer was told. - Name the read pattern that pays for all of it. Rendering, dispute response and export are per-tenant, per-period reads over thousands of lines that would otherwise join back to slowly changing dimensions that no longer hold the historical value. The write side is a once-per-period batch, so the extra columns cost nothing that matters.
- Concede the case where the reviewer is right: a mutable operational attribute such as the tenant's current plan name has no business on a line. If a report wants it, join. If a statement needs the plan as of the period, that is another snapshot and it belongs on the header with the rest.
Follow-up
- Write the composite foreign key and the unique constraint it requires on the parent. What does it cost on every line insert, and what does it do to a bulk load?
- A tenant is renamed after being invoiced. Which rows change, and what does the customer see on last quarter's PDF?
- Where does currency live, and what breaks if a tenant's billing currency changes between two periods?
Can you explain the internal working of a HashMap?
Can you explain the internal working of a HashMap?
Approach
- State your assumptions explicitly before working the problem.
- Say what you would check first and why it is the highest-information step.
- Clarify what is being asked and what a complete answer contains.
Follow-up
- What assumption would you test first?
- How would you know your answer was wrong?
What is the difference between `@Component` and `@Configuration` annot…
What is the difference between @Component and @Configuration annotations?
Approach
- Work from the requirement backwards to the design.
- Clarify what is being asked and what a complete answer contains.
- Say what you would check first and why it is the highest-information step.
Follow-up
- How would you know your answer was wrong?
- What assumption would you test first?
How do Streams and Lambdas work in Java 8?
How do Streams and Lambdas work in Java 8?
Approach
- Work from the requirement backwards to the design.
- Clarify what is being asked and what a complete answer contains.
- Say what you would check first and why it is the highest-information step.
Follow-up
- How would you know your answer was wrong?
- What assumption would you test first?
Explain the difference between Collection and Collections in Java.
Explain the difference between Collection and Collections in Java.
Approach
- Say what you would check first and why it is the highest-information step.
- Clarify what is being asked and what a complete answer contains.
- Work from the requirement backwards to the design.
Follow-up
- What assumption would you test first?
- How would you know your answer was wrong?
Make run creation safe when the client times out and retries
POST /v1/runs inserts a job_run row and dispatches a sandbox. The caller is a customer's CI pipeline with a 10-second timeout and three automatic retries. A run that takes 12 seconds to start returns after the client has already given up, so the retry starts a second sandbox and bills it. Redesign the endpoint: the key the client sends, its scope and storage, what happens when the same key arrives with a different body, what happens when a retry arrives while the first request is still in flight, and how long the key stays honoured.
Approach
- Name the defect before designing: the client's timeout is an unknown outcome, and the naive shape gives it no way to ask whether the earlier call landed, so its only choices are to duplicate the run or to drop it.
- Require an
Idempotency-Keyheader scoped to (tenant_id, key) rather than to the credential, so a rotated or replaced credential still replays. Store the key with a request fingerprint, SHA-256 over method, path and the canonicalised body, plus state, the stored response status and body, and the resulting run_id. - Make the claim a write rather than a read: insert the key row inside the same transaction as the run under
unique (tenant_id, idempotency_key). The loser of a concurrent race takes a unique violation and then reads the winner's row, which is what makes the duplicate case deterministic instead of timing-dependent. - Define three outcomes precisely. Same key, same fingerprint, completed: replay the stored response with a header marking it a replay. Same key, different fingerprint: 422 with an
idempotency_key_reusecode, never the stored response. Same key still in flight: 409 with Retry-After, because blocking the second caller holds a connection for the duration of someone else's request. - Close the dispatch gap with an outbox row committed alongside the run and a relay that enqueues it. Commit-then-publish loses the dispatch if the process dies in between; publish-then-commit hands a worker a run_id that does not exist yet.
- Set retention from the client, not from storage cost: the key must outlive the caller's worst-case total retry window, so publish a number such as 24 hours and state that a key reused after expiry legitimately creates a second run.
Worked solution 30 min
- Draw the timeline of the failing case: commit at t=11s, client abandons at t=10s, retry at t=10.1s, and mark where the second sandbox starts.
- Write the idempotency table DDL with the unique constraint and the fingerprint column, then the single transaction that inserts both rows.
- Enumerate the four arrival cases (first, replay, conflicting body, in-flight) and write the exact status, headers and body for each.
- Add the outbox row to the same transaction and describe the relay's at-least-once behaviour and why the worker must tolerate a duplicate dispatch.
- State the retention horizon and the sentence that goes in the public docs about key reuse after expiry.
Follow-up
- The SDK generates a fresh key on every attempt rather than reusing one. What in your response surface makes that visible instead of silently doubling the bill?
- How does this interact with job_run.parent_run_id: is an automatic retry of a failed run the same object as a client retry of the request?
Gateway p99 spikes on a five-minute cadence
edge-gateway caches each credential-to-authorisation-context decision for five minutes. p99 sits at 6 ms except for a spike to 900 ms roughly every five minutes, worst in the region with the most pods, and control-plane CPU and read latency rise in step with it. The error rate stays near zero. Customers are told a revoked credential stops authorising within 60 seconds. Give the ordered checklist that identifies the mechanism, and a fix that removes the spike without weakening the 60-second bound.
Approach
- Test periodicity before anything else: take the spike timestamps modulo the TTL in seconds. A tight cluster at a fixed offset means expiry phase, while traffic-driven spikes scatter.
- Overlay pod start times. Entries filled at first request inherit the phase of the pod that filled them, so a cohort of pods deployed together expires together and the amplitude should track cohort size rather than tenant count.
- Separate a herd from a capacity shortfall by measuring control-plane requests per second during a spike against baseline. A stampede shows a step of roughly (pods x hot keys) for one interval with hit rate collapsing to near zero, not a gradual climb that would indicate the dependency is simply undersized.
- Apply three independent controls: randomise each key's TTL by a factor drawn uniformly from something like 0.8 to 1.0 so cohorts de-phase; coalesce concurrent misses per key per pod so exactly one refresh is in flight; and serve the stale value while that refresh runs so a miss costs the stale read rather than the dependency's queue.
- Bound staleness against the published contract rather than against comfort: serve-stale is admissible only up to the 60-second revocation bound, so the TTL floor and the stale window together must stay inside it, and the published invalidation must delete the entry rather than schedule a refresh.
- Decide in advance what a miss does when the control plane is unreachable, because that is now the only uncached path: failing closed converts a dependency outage into a total outage, while extending stale service past the bound breaks the revocation promise. Pick one and configure it explicitly.
Follow-up
- Publish-subscribe invalidation is lossy under a partition. Given that, what actually enforces the 60-second bound, and what number would you put in the contract if asked to defend it?
- One tenant's key is hot enough that a single pod's coalesced refresh still matters. What changes?
- Would a shared cache tier in front of the control plane help or shift the problem, and what new failure does it add?
Roughly ninety minutes on weeknights with one longer weekend block. The plan cuts scope rather than compressing everything, on the assumption that one thing finished per night beats four half-started.
Prepare, practise & reflect
One practical outcome each day. Spend longer where you need it.
0 / 7 done01Fix the scope and take a cold baseline
- Read the role description and write the three things the loop will almost certainly test, then write an explicit not-doing list and keep it visible all week.
- Take one twenty-five-minute coding problem and one fifteen-minute design prompt cold, and write the single sentence naming what blocked each, because those two sentences decide where the remaining evenings go.
- Set the week's rule: one thing finished every night, including the night you only have forty minutes.
Deliverable: A one-page scope with a not-doing list and two cold attempts, each carrying one sentence on what blocked it.
Practice prompt ↗Practice prompt ↗Worked solution ↗02One pattern, written three times from blank
- Choose the single pattern most likely to appear in your loop and write it three times from an empty file rather than editing the previous attempt.
- On the third pass, write the invariant as a comment before the loop body and the complexity before the first line of code.
- Stop at ninety minutes even if the third version is imperfect, and write the one thing you would fix given another hour.
Deliverable: Three independent implementations of the same pattern plus a note on what changed between them.
Practice prompt ↗Practice prompt ↗03One design, only to the depth you can defend
- Take one system shape and go only as far as requirements, interface and data model, refusing to draw a box you could not survive a follow-up about.
- Attach one number to each non-functional requirement, deriving it rather than asserting it, and write the assumption the number rests on.
- Write the one tradeoff you are choosing against and the observation that would make you reverse it.
Deliverable: One design at interface-and-schema depth with derived numbers and one written reversible tradeoff.
Practice prompt ↗Practice prompt ↗04Only the fundamentals you will have to defend
- Write, in under two hundred words each, the answers to the two questions that follow almost any implementation: why this structure and not the obvious alternative, and what happens to this code at a hundred times the input.
- Write what an index actually costs: faster lookups on the indexed columns against a write that now maintains a second structure, plus the cases where the planner declines to use it anyway, low selectivity, or a predicate wrapping the column in a function.
- Delete any answer you cannot deliver aloud in under a minute, since an answer that needs reading is not an answer you have.
Deliverable: Three written answers, each under two hundred words and each timed aloud.
Practice prompt ↗Practice prompt ↗Worked solution ↗05Your own work, timed
- Write a ninety-second and a four-minute version of your main project and time both aloud rather than reading them.
- Prepare the two follow-ups that always come: what you would do differently, and how you knew it worked.
- Put one number in the first sentence and be ready to say exactly where it came from and what it excludes.
Deliverable: Two timed narratives with one defensible number in the opening line.
Practice prompt ↗Practice prompt ↗06The one full rehearsal, in the weekend block
- Run a sixty-minute mock covering a coding round and a design round in one sitting with no break, because sustained attention is the thing evenings have not trained.
- Immediately afterwards, and before hearing any feedback, write the three moments you lost the thread.
- Spend the rest of the block only on those three moments, and on nothing you merely feel shaky about.
Deliverable: Mock notes naming three failure moments with a specific fix written under each.
Practice prompt ↗Practice prompt ↗07Taper
- Write the twenty-minute warm-up you will actually do on the morning: one problem you can already solve from a blank file, one design you can narrate, and nothing you have never seen.
- Re-read only your own notes from this week and open no new material.
- Write the logistics down: the editor or shared document you will be working in, whether execution and lookups are permitted, and the sentence you will use when you do not know something.
Deliverable: A one-page card holding the design structure, the project numbers, and the logistics.
Practice prompt ↗Practice prompt ↗Worked solution ↗Expand any day for tasks and deliverables. Your progress is saved on this device.
Nobody is scoring your stamina at three in the morning. What carries weight is which signal told you something was wrong, what you measured before touching anything, what you rolled back versus what you fixed forward, and why you picked one. 'We restarted it and it went away' is a story about not knowing.
Estimate a tenant-leading index migration you have never run
Someone needs a date. usage_event carries an index on (occurred_at) and needs (tenant_id, occurred_at); the largest tenant holds roughly a hundred times the median tenant's rows, the table is partitioned daily with years of retention, and you have never run a migration on a table this large. Give an estimate you would defend: how you decompose the work, the two or three numbers you would go and measure first, the range and confidence you state, and what you commit to when the person asking needs a single date today.
Approach
- Refuse the bare number and then give one anyway, in the form that is actually useful: a range plus the measurement that collapses it. 'Four to eleven days; one afternoon building this index on a restored copy of the largest partition takes that to within a day' is an answer, while 'it depends' is not.
- Decompose by failure mode rather than into equal chunks, because that is where estimates go wrong. On a partitioned parent you create the index ON ONLY the parent, build each partition's index with CREATE INDEX CONCURRENTLY, then ALTER INDEX ... ATTACH PARTITION, at which point the parent index becomes valid. CONCURRENTLY does not block writes but scans each partition twice, waits out older transactions, cannot run inside a transaction block, and on failure leaves an invalid index you must drop concurrently and retry.
- Name the two unknowns that dominate and price them: build time on one restored partition of realistic size, and whether the planner actually chooses the new index for the skewed tenant, since selectivity for a tenant holding most of the rows is a different question from selectivity for the median tenant. Both are half-day measurements against a replica, and both are cheaper than being wrong by a week.
- State the assumptions the range is conditional on, because that is what makes a slip a re-estimate instead of a credibility event: no partition above a stated row count, one concurrent build at a time so it does not compete with ingest for I/O, and an ingest backlog that can absorb the added write amplification while both indexes exist.
- Budget the step nobody budgets: verification and the old index's removal. Dropping the old index is fast, but deciding it is safe to drop means confirming no plan still uses it, and that confirmation waits on real traffic across a full weekly cycle rather than on your patience.
- Answer the single-date request honestly. Commit to a date for the first checkpoint — the measured build number from the replica — and to re-estimating on that date, and say plainly what you are not committing to yet. A date with a scheduled re-estimate is worth more to the asker than a confident wrong one, and you should say why in those words.
Follow-up
- The concurrent build fails half way through the largest partition. What is the state of the database and what do you do next?
- Your estimate slips by sixty percent. Which assumption broke, and at what point would you have known?
- The person asking needs the date for a customer commitment. Does your answer change?
Own the incident where invoices undercounted metered usage
A metering consumer acknowledged each batch before committing the fold into usage_rollup_hourly. A rolling deploy restarted consumers mid-batch for two hours; roughly 1.4M usage_event rows were acknowledged and never folded, and 61 invoices sealed against the resulting rollups before anyone noticed. Take the owner's role. Describe an incident of comparable blast radius you owned: how it surfaced, the query that sized the loss, what you stopped first, and how the money was corrected. Give a wall-clock timeline and one thing you got wrong while it was still live.
Approach
- Open with the invariant that broke and the direction of the error, because they determine everything else: acknowledging before committing makes the consumer at-most-once, so this loses events rather than duplicating them, and loss raises no error anywhere. A listener who hears 'we lost revenue silently' knows immediately why detection took two hours.
- Size it with a stated reconciliation rather than an adjective: sum(quantity) from usage_event grouped by (tenant_id, sku, hour of occurred_at) over the window, against usage_rollup_hourly.quantity_sum on the same keys, filtered to environment='production' because staging and sandbox are metered but not billed. Then bisect by hour and tenant until single cells explain the gap. Say how long that ran and whether a replica could serve it while the incident was live.
- Separate mitigation from fix and say which came first. Mitigation is holding the sealing job, because a sealed row is frozen by design and every minute of sealing converts a recoverable rollup into an invoice correction. The fix is moving the acknowledgement after the commit, which re-introduces duplicates that the dedup check on (tenant_id, idempotency_key) must now absorb.
- State the correction path in the domain's own terms: sealed periods are never edited, so each affected tenant gets an adjustment line on the next invoice with kind='adjustment' and voided_by_line_id pointing at the line it reverses, priced against the same rate tier and carrying the watermark it priced against. That is four separate numbers — tenants affected, minor units, the cycle the adjustment lands in, and when customers were told.
- Close on one prevention control with its cost, not five: a per-hour reconciliation comparing raw sum to rollup sum that pages above a threshold. Name the threshold and the false-page rate you accepted, because a detector nobody will keep staffed is not prevention.
- Name a mistake you made inside the response window — the wrong first hypothesis, a mitigation that made it worse — rather than a design mistake from six months earlier. That is the part candidates rehearse away and interviewers weight heavily.
Follow-up
- Your fix moves the acknowledgement after the commit. What breaks now, and what absorbs it?
- One undercharged tenant has since churned. Do you bill them, and who decides?
- How would you have caught this in ten minutes instead of two hours, and what would that detector cost you in pages per week?
Unblock an engineer on a job run that finished twice
An engineer two weeks into the team brings you a job_run row showing status succeeded with an exit_code written by a worker declared dead ten minutes earlier; the retry attempt also shows succeeded. They have spent a day adding logging and are no closer. You have twenty minutes and you do not want to take the keyboard. Describe how you unblock someone: the question you ask first, what you let them find themselves, the concept you name and when, and how you check the next day that they own the fix rather than having watched you produce it.
Approach
- Ask what they expect rather than what they see: which statement set status to succeeded, and what did it check before writing? That question points directly at the update's WHERE clause, which is where the answer lives, and it costs them nothing to answer, so it does not read as a test.
- Let them build the timeline themselves from the row: queued_at, started_at, leased_until, finished_at and worker_id, on both the original run and the retry. Two different worker_ids with a lease expiry between them tells the whole story, and they will see it before you say it.
- Name the concept once the evidence has earned it. A lease bounds time; it does not prevent a write. The store has to reject a stale writer, which means the update carries a fencing token the row compares — update job_run set status = 'succeeded' where run_id = $1 and lease_token = $2 and status = 'running' — and a long garbage-collection pause or a brief partition is enough to produce what they are looking at.
- Point at the second, less obvious half and let them decide it: 'lost' exists in the status enum precisely so a run whose worker vanished is not recorded as failed, because failed asserts an outcome nobody observed and the system then bills and retries on that assertion. Ask them what these two rows should have said.
- Leave them with the next step rather than the patch — a test that kills the first worker after the sandbox exits and before the row is written — and say when you are available again, so the offer is real rather than polite.
- Check ownership the next day by what they produced, not by asking if it went well: a test that reproduces the window proves they understood it; a test that only asserts the new WHERE clause proves they copied it. Ask them to explain it to a third person and listen for whether the explanation is theirs.
Follow-up
- They propose a longer lease instead of a token. What do you say, and what breaks when legitimate runs last thirty minutes?
- How can you tell whether your explanation landed or they simply deferred to you?
- The same engineer hits a variant of this next month. What did you fail to teach the first time?
- 01
Someone needs a date. usage_event carries an index on (occurred_at) and needs (tenant_id, occurred_at); the largest tenant holds roughly a hundred times the median tenant's rows, the table is partitioned daily with years of retention, and you have never run a migration on a table this large. Give an estimate you would defend: how you decompose the work, the two or three numbers you would go and measure first, the range and confidence you state, and what you commit to when the person asking needs a single date today.
- 02
A metering consumer acknowledged each batch before committing the fold into usage_rollup_hourly. A rolling deploy restarted consumers mid-batch for two hours; roughly 1.4M usage_event rows were acknowledged and never folded, and 61 invoices sealed against the resulting rollups before anyone noticed. Take the owner's role. Describe an incident of comparable blast radius you owned: how it surfaced, the query that sized the loss, what you stopped first, and how the money was corrected. Give a wall-clock timeline and one thing you got wrong while it was still live.
- 03
An engineer two weeks into the team brings you a job_run row showing status succeeded with an exit_code written by a worker declared dead ten minutes earlier; the retry attempt also shows succeeded. They have spent a day adding logging and are no closer. You have twenty minutes and you do not want to take the keyboard. Describe how you unblock someone: the question you ask first, what you let them find themselves, the concept you name and when, and how you check the next day that they own the fix rather than having watched you produce it.
Is this an official 1 digit technology Pvt interview guide?
No. It is PracHub's own research and practice material for the Software Engineer role at 1 digit technology Pvt. Rounds and questions reflect what candidates have reported, not a process 1 digit technology Pvt has published, and they change over time. Confirm the current format and scope with your recruiter.
PracHub interview research ↗How long does the entire process take?
The process is typically completed within 1–2 weeks, though it can vary. Keep your schedule flexible for back-to-back rounds.
PracHub interview research ↗What is the most important thing to prepare?
Focus on the projects listed on your resume. Interviewers will drill down into the details of your past work to see how well you understand the systems you built.
PracHub interview research ↗Is the interview difficult?
Most candidates find the questions to be of average difficulty, focusing on core fundamentals. If you are strong in DSA, OOPs, and SQL, you are well-positioned to succeed.
PracHub interview research ↗Will there be a coding test?
Yes, most processes start with an online aptitude and coding assessment. Practice basic to medium-level coding problems on platforms like LeetCode or similar sites to prepare.
PracHub interview research ↗Sources & methodology 3 sources ↗
No official company page is cited. Rounds and questions come from candidate reports and PracHub editorial material; each source shows the date it was read.
- 01PracHub interview research ↗
PracHub editorial research into this company and role, maintained with this guide. Candidate-reported, not an employer publication.
PracHub page · Accessed 2026-09-22 - 02PracHub Software Engineer practice ↗
Cross-company practice questions for this role.
PracHub page · Accessed 2026-09-22 - 03PracHub interview preparation framework ↗
The framework the preparation plan follows.
PracHub page · Accessed 2026-09-22
Explore related engineering environments and compare the preparation focus.
Confluent Software Engineer Interview Guide
Concurrency exercises for Confluent candidates: check-then-act races, deadlock from inconsistent lock ordering, and why two individually atomic operations do not compose into an atomic update.
GitHub Software Engineer Interview Questions & Guide 2026
Testing exercises for GitHub software engineer prep: choosing boundary cases over repetition, isolating tests from shared clock and ordering, and treating an intermittent failure as a defect rather than noise.
Citi Software Engineer Interview Guide
Concurrency exercises for Citi candidates: check-then-act races, deadlock from inconsistent lock ordering, and why two individually atomic operations do not compose into an atomic update.
Coupang Software Engineer Interview Guide
Systems practice for Coupang software engineer candidates, weighted toward B2B software and infrastructure work: the load that actually arrives, the failure modes that matter there, and the invariants a partial outage must not break.