As a Data Scientist at A global Insurer, you play a pivotal role in transforming vast, complex datasets into strategic assets. Your work directly influences how the company assesses risk, optimizes pricing models, and improves customer outcomes on a global scale. You are not just building models in isolation; you are a partner to business stakeholders, translating ambiguous challenges into structured analytical solutions that drive the bottom line.
The environment at A global Insurer is characterized by a blend of long-standing industry expertise and a forward-thinking approach to predictive modeling. You will work across cross-functional teams to tackle high-impact problems, ranging from traditional actuarial challenges to modern applications of NLP and machine learning. This role is ideal for a practitioner who enjoys deep technical work but is equally energized by the prospect of influencing organizational strategy through data-driven insights.
Initial Conversation
reportedAn extra round usually exists because something is still open after the standard loop: a skill the earlier interviews did not sample, a level decision, or two interviewers who disagreed. It is rarely a rerun of what you already did well. Ask the recruiter who you are meeting, what function they sit in, and how long the session runs. That is an ordinary scheduling question, and the answer changes what you should prepare. What separates a strong candidate here is treating the round as a fresh evaluation with its own bar, rather than assuming earlier performance carries you through or sinks you.
What to demonstrate
- Whether you can answer well on ground the earlier rounds did not cover, without leaning on what you already said to someone else
- Consistency of the facts in your stories: the same sample size, timeframe, team size and scope of your own role as in earlier conversations
- How you handle an unfamiliar format live, including whether you ask what kind of answer is wanted before producing one
How to prepare
- Ask the recruiter for the interviewer's function, the length, and whether to expect a coding surface, a discussion, or a presentation. Preparing for a 30 minute conversation with a partner team is not the same work as preparing for a 60 minute technical block.
- Write out what each earlier round actually covered, then list the two or three areas nobody probed. That gap is the most likely subject of the extra round.
- Re-read the numbers in the project stories you have already told, so a second telling does not quietly contradict the first.
Technical Deep Dives
reportedA handful of shapes account for most of what gets asked in this format: a ranking or deduplication inside groups, a running or rolling total, a period-over-period comparison, and a cohort tracked forward over time. Recognising the shape quickly is most of the speed here; deriving it from scratch while a clock runs is where the time goes. Know that a window function keeps every row while a GROUP BY collapses them, and know which one the question needs. If the exercise is in Python instead of SQL, the same shapes arrive as groupby with transform, shift and merge, and the same grain mistakes are available.
What to demonstrate
- Whether you reach the right construct without a detour, such as ROW_NUMBER over a partition to deduplicate instead of a self-join against a MAX subquery
- Whether you know what your window frame actually is, since adding ORDER BY inside OVER changes the default frame and silently changes a running total
- Whether the thing runs. A near-miss that throws an error scores below a plainer query that returns the right rows.
How to prepare
- Write each of the four shapes once from memory against a small schema and keep the working version somewhere you will reread it: dedupe with ROW_NUMBER, a running total, a month-over-month change with LAG, and a retention table
- Compute one running total twice on data with tied timestamps, once on the default frame and once with ROWS BETWEEN UNBOUNDED PRECEDING AND CURRENT ROW, and look at where the two disagree
- If Python is on the table, rebuild the dedupe and the running total with groupby and cumsum, then assert the two implementations return identical rows
Practical Application Focus
reportedRounds outside the standard loop often open with something deliberately under-specified: a loose business problem, an open question about a product area, a dataset described in one sentence. The common failure is surveying, listing six plausible approaches and committing to none of them. The thing that separates a strong answer is scoping out loud. State what you are treating as the goal, name the metric you would move, say what you are choosing not to do and why, then take one path through to an actual answer. An interviewer can follow you down a narrow path. Nobody can grade a menu.
What to demonstrate
- Whether you turn an ambiguous prompt into a stated question with a measurable outcome before doing any work
- The judgement visible in what you cut, and whether you say why you cut it rather than silently dropping it
- Whether you land on a concrete recommendation with its caveat attached, rather than an unranked set of options
How to prepare
- Take three vague prompts, such as 'is this feature working', 'why did retention drop', and 'should we expand into a new segment'. For each, write one sentence of goal, one primary metric with its window, and two things you are explicitly not doing.
- Practise giving the recommendation first and the reasoning second, in five minutes. Loosely defined rounds are usually time-boxed, and an answer that arrives last often does not arrive.
- Keep a running assumption list as you talk, on paper or in the shared doc, so the interviewer can challenge one assumption instead of your whole answer.
PracHub editorial advice for the preparation topics above.
Recalibrating an underwriting cutoff on approved and funded applicants only
Rejected applicants have no repayment outcome, and they were rejected because the incumbent model scored them badly, so the missingness depends directly on the outcome being modelled. Reject inference by augmentation or parcelling fills the gap using the incumbent model's own assumptions, which means it can confirm those assumptions but cannot test them. The only genuinely new information about the reject region comes from bureau performance on rejects who borrowed elsewhere, or from a deliberately randomised approval band around the cutoff.
Reading the most recent months of fraud and dispute rates as final
Consumer dispute rights commonly run around 120 days from the transaction or expected delivery date, and several reason codes run considerably longer, so the disputes belonging to a recent transaction month have simply not been filed yet. Any chart attributed by transaction date therefore slopes down at the right edge regardless of what is happening. The fix is to report only matured cohorts, or to apply development factors estimated from completed months and to show the estimate as an estimate.
Explaining an aggregate move without decomposing the mix shift
Split the change in the aggregate into within-segment movement and movement in segment weights before you explain it. Every segment's rate can fall while the overall rate rises, purely because volume shifted toward segments that already had higher rates.
Crediting a treatment for regression to the mean
Selecting a group because it is extreme (lowest-engagement users, accounts having their worst month, the bottom decile of a score) moves that group's expected next-period value back toward the average even under no treatment, by exactly as much as the selecting measure is imperfectly correlated with its own later value. Compare against units that met the same selection rule and went untreated, or use two pre-periods so the bounce-back is visible before the intervention starts. A pre-post number on a group chosen for being extreme measures the selection rule, not the treatment.
Choose a category, try a prompt, then open its approach, worked solution or follow-up when you need it.
Describe how you would handle missing data or outliers when preparing …
Describe how you would handle missing data or outliers when preparing a dataset for a predictive model.
Approach
- Set a baseline first, so any model has something honest to beat.
- Frame the prediction: the label, the moment of prediction, and the action it triggers.
- Pick an evaluation metric that matches the cost of each error type, not a default.
Follow-up
- How would you choose the decision threshold, and who owns that choice?
- What would you monitor after launch to know the model is still valid?
Implement accident-quarter loss ratio at twelve months development
fct_policy_period_monthly arrives as a stack of month-end snapshots: each row carries valuation_month alongside as_of_month, policy_id, product_line, written_premium_minor, earned_premium_minor, paid_loss_minor, case_reserve_minor, ibnr_reserve_minor and loss_adjustment_expense_minor. Compute the accident-quarter loss ratio at exactly 12 months of development: incurred losses over earned premium, both taken from rows whose as_of_month falls in the accident quarter, read from the snapshot 12 months after that quarter closes. Report quarters that cannot reach that age as incomplete rather than dropping them.
Approach
- Derive accident_quarter from as_of_month, then define the evaluation snapshot per quarter as valuation_month equal to the quarter's final month plus twelve months. Every figure in the ratio comes from that one snapshot, not from whichever snapshot happens to be newest.
- Numerator is paid_loss_minor plus case_reserve_minor plus ibnr_reserve_minor over the accident quarter's rows in that snapshot. Loss adjustment expense may be included or not, but the choice applies to every quarter and is named in an output column.
- Denominator is earned_premium_minor over the same rows. Written premium is booked in full at inception, so in a growing book it runs ahead of earned premium and drags the ratio down, with the error reversing when the book shrinks.
- Left-join the full quarter list against available valuation months so a quarter with no 12-month snapshot yields status incomplete and a null ratio, instead of disappearing and shortening the series without saying so.
- Split by product_line, since both the loss ratio level and the speed of development differ by line, and a blended series moves with mix as much as with experience.
Worked solution 30 min
- Add accident_quarter and a target_valuation column equal to the quarter end plus twelve months.
- Filter rows to those where valuation_month equals the row's target_valuation, then assert each accident_quarter has exactly one distinct valuation_month left.
- Aggregate incurred and earned premium by accident_quarter and product_line and take the ratio.
- Reindex against the full list of accident quarters and product lines, marking rows with no matching snapshot as incomplete with a null ratio.
- Recompute one quarter by hand on a five-policy subset and confirm it matches.
Follow-up
- The most recent complete quarter came in four points better than the one before. What do you check before calling it an improvement?
- How would you estimate the 12-month figure for a quarter that is only 6 months developed, and how would you label the estimate?
- Why can an expense ratio legitimately use a different denominator from the loss ratio in the same presentation?
Estimate a delinquency roll-rate matrix and project twelve months
fct_loan_performance_monthly gives loan_id, as_of_month_end, months_on_book, delinquency_bucket, charge_off_flag, prepaid_in_full_flag and restructured_flag. Build a month-to-month transition matrix over the five delinquency buckets plus absorbing charged_off and prepaid states. Loans that stop appearing must be routed to an absorbing state rather than dropped. Project the current book forward 12 months by repeated matrix multiplication and report the projected share reaching charge-off. Handle restructured_flag explicitly, and name one place the Markov assumption fails on this data.
Approach
- Build consecutive month pairs per loan by shifting as_of_month_end within loan_id, then verify the shifted value is exactly one month later. A gap is not a transition, it is an exit you have not resolved yet.
- Resolve exits before counting anything. A loan whose last row carries charge_off_flag moves to charged_off, one carrying prepaid_in_full_flag moves to prepaid, and one that disappears with neither is a data question to raise rather than silently discard, because discarding it is survivorship that inflates every cure rate.
- Count pairs into a 7 by 7 matrix and row-normalise. Assert every row sums to one and the two absorbing rows are the identity; a row that does not sum to one means exits were dropped.
- Decide and state the restructure rule. Restructuring resets days_past_due, so a dpd_60_89 to current move on a restructured loan is not a cure. Either give restructured loans their own state or carry the pre-restructure bucket, but do not let that move land in the cure cell.
- Project by taking the current bucket distribution as a row vector and multiplying by the matrix twelve times. Report the charged_off entry, and report it again from an all-current starting vector so the reader can see how much of the projection comes from loans that are already delinquent today.
- State the homogeneity failure plainly: transition rates depend strongly on months_on_book, so one pooled matrix applied to a book with a young mix understates early-life delinquency. If the mix is moving, estimate separate matrices by seasoning band.
Follow-up
- How would you validate the projection against what actually happened, and over what window?
- The cure rate out of dpd_30_59 rose five points last quarter. What are the candidate explanations and how would you separate them?
- When would you prefer a vintage curve to a roll-rate projection, and why?
How would you use SQL window functions to calculate a rolling average …
How would you use SQL window functions to calculate a rolling average of claim amounts over the last three months?
Approach
- Handle the rows that do not match: a LEFT JOIN with a NULL check is usually the question.
- Say which table is the grain you start from, and join outward from it.
- Compute rates by summing numerator and denominator separately, never by averaging rates.
Follow-up
- How would you verify this result without re-running the same query?
- What breaks if events arrive late or out of order?
Write a query to join multiple tables and calculate summary statistics…
Write a query to join multiple tables and calculate summary statistics for a specific insurance product.
Approach
- Compute rates by summing numerator and denominator separately, never by averaging rates.
- Say which table is the grain you start from, and join outward from it.
- Handle the rows that do not match: a LEFT JOIN with a NULL check is usually the question.
Follow-up
- What breaks if events arrive late or out of order?
- How does the query change if the join becomes one-to-many?
Customers with no credit application, avoiding the NOT IN trap
Count current customers who have never submitted a credit application, broken out by segment. dim_customer is a slowly changing dimension type 2, so restrict to is_current = true, kyc_status = 'verified' and closed_at null. In fct_loan_application, customer_id is null for applicants who were not customers when they applied. Write the anti-join, return segment and customer_count, and state in one line what NOT IN (SELECT customer_id FROM fct_loan_application) returns against this table and why.
Approach
- Pin the dimension to one row per customer first: is_current = true already guarantees that, but say so out loud, because forgetting it multiplies every count by the number of attribute versions a customer has accumulated.
- Write the anti-join as NOT EXISTS with a correlated predicate on customer_id, which evaluates per row and is unaffected by nulls anywhere in the applications table.
- Name the failure explicitly: NOT IN against a nullable column compares each candidate to a set containing NULL, the comparison yields UNKNOWN rather than TRUE, and the whole predicate is therefore never satisfied, so the query returns zero rows.
- If NOT IN is required for some reason, add WHERE customer_id IS NOT NULL inside the subquery, which restores the intended semantics, and note that a LEFT JOIN with an IS NULL filter is equally safe.
- Group by segment and sanity-check the total against the unfiltered current-customer count minus the count of distinct applying customers.
Worked solution 20 min
- SELECT segment, COUNT(*) FROM dim_customer c WHERE c.is_current AND c.kyc_status = 'verified' AND c.closed_at IS NULL.
- Add AND NOT EXISTS (SELECT 1 FROM fct_loan_application a WHERE a.customer_id = c.customer_id).
- Group by segment and order by the count descending.
- Run the NOT IN variant alongside it and record that it returns zero rows, then run it again with IS NOT NULL added to the subquery and confirm the counts match the NOT EXISTS version.
Follow-up
- Rewrite it as a LEFT JOIN with IS NULL and say when you would prefer that form to NOT EXISTS.
- How does the answer change if you want customers who never applied as of a historical date rather than today?
- The applications table has 40,000 rows with a null customer_id. What are those rows, and are they a data quality problem or a product fact?
If you noticed a sudden metric drop in our core policy renewal dashboa…
If you noticed a sudden metric drop in our core policy renewal dashboard, what steps would you take to diagnose the cause?
Approach
- Name one primary metric, then the guardrail that stops it being gamed.
- State what result would change your recommendation, so the answer is falsifiable.
- Decompose the metric into the rates that drive it, and say which one you would check first.
Follow-up
- What would you do if the primary metric and the guardrail moved in opposite directions?
- How would you detect that the metric is being gamed rather than genuinely improving?
How do you balance long-term user experience metrics against short-ter…
How do you balance long-term user experience metrics against short-term revenue goals?
Approach
- Decompose the metric into the rates that drive it, and say which one you would check first.
- State what result would change your recommendation, so the answer is falsifiable.
- Fix the population and the time window before naming any metric.
Follow-up
- What would you do if the primary metric and the guardrail moved in opposite directions?
- How would you detect that the metric is being gamed rather than genuinely improving?
How would you design a set of metrics to evaluate the success of a new…
How would you design a set of metrics to evaluate the success of a new customer acquisition initiative?
Approach
- Decompose the metric into the rates that drive it, and say which one you would check first.
- Name one primary metric, then the guardrail that stops it being gamed.
- Restate the decision this analysis has to support, and who acts on the answer.
Follow-up
- Which segment would you cut first, and what would that rule out?
- How would you detect that the metric is being gamed rather than genuinely improving?
How do you determine the sample size required to achieve statistical s…
How do you determine the sample size required to achieve statistical significance for a given experiment?
Approach
- Name the guardrails that would stop a launch even on a positive primary result.
- Name the randomisation unit first; it decides the variance and what the test can detect.
- Decide the analysis before seeing data, including how long it runs and when you look.
Follow-up
- What would you conclude if the result is positive but the test is underpowered?
- What would you do if you could not randomise at all?
Walk me through the process of setting up an A/B test for a new pricin…
Walk me through the process of setting up an A/B test for a new pricing strategy.
Approach
- Name the randomisation unit first; it decides the variance and what the test can detect.
- Decide the analysis before seeing data, including how long it runs and when you look.
- Say whether units interfere with each other, and switch design if they do.
Follow-up
- What would you do if you could not randomise at all?
- How would you handle interference between treated and control units?
Cut variance on a heavy-tailed settled-volume metric
The primary metric is settled payment volume per customer per month in one reporting currency, randomised by customer_id, computed from fct_payment_authorization rows that are approved, captured and not reversed. The available population powers a minimum detectable effect of 3.0 percent, but the plausible effect is about 1.2 percent. You have eight pre-randomisation weeks of the same metric per customer, and the distribution is heavily right-skewed. Propose a variance-reduction plan, state the estimator and its preconditions, quantify the improvement you expect, and say whether it closes the gap.
Approach
- Apply CUPED with the pre-period metric as the covariate. Define Y_adj = Y - theta * (X - Xbar) with theta = Cov(Y, X) / Var(X) estimated on the pooled experiment data. The variance of the adjusted difference is Var(Y) * (1 - rho^2) where rho is the correlation between Y and X, so the entire benefit is determined by rho and nothing else.
- Check the precondition that makes the estimator unbiased: X must be measured strictly before assignment. A covariate computed over any window that overlaps the test period absorbs part of the treatment effect and biases the estimate toward zero. Pin the covariate window end date to the randomisation timestamp, not to the analysis date.
- Handle customers with no pre-period. Set X to zero plus a no-history indicator, or stratify them as their own cell. Either is valid because the imputation rule is fixed before assignment and does not depend on the arm; what is invalid is imputing with an arm-specific mean.
- Attack the skew separately, because CUPED reduces variance but does not make a heavy tail light. Pre-register a winsorisation point such as the 99.5th percentile of the pre-period distribution, state plainly that this changes the estimand from the mean to a capped mean, and report both. Capping at a pre-period quantile rather than a post-period one keeps the cap from depending on the treatment.
- Stratify the assignment on pre-period decile crossed with segment, which removes the same variance CUPED does when the covariate is the stratifying variable and additionally guarantees balance rather than achieving it in expectation. Post-stratified analysis is the fallback if assignment is already running.
- Pin the currency conversion to a fixed rate table dated at test start. Using settlement_fx_rate as realised injects market movement into the metric, and if the arms have different currency mixes it injects it unequally.
Worked solution 25 min
- Estimate rho on historical data by correlating each customer's eight-week pre-period volume with their following-month volume; assume the answer is 0.62.
- Compute the variance multiplier: 1 - rho^2 = 1 - 0.3844 = 0.6156, so the standard error falls by sqrt(0.6156) = 0.785 and the effective sample size rises by 1 / 0.6156 = 1.62.
- Apply to the MDE: 3.0 percent * 0.785 = 2.36 percent.
- Invert the requirement: reaching 1.2 percent needs a variance multiplier of (1.2 / 3.0)^2 = 0.16, which requires rho = sqrt(1 - 0.16) = 0.92. That correlation is not attainable from an eight-week pre-period on this metric.
- Price the remaining shortfall in duration. Variance of the mean falls as 1/n, so the extra exposure needed is the ratio of the variance multipliers taken the right way round: 0.6156 / 0.16 = 3.85. The CUPED-adjusted plan must run about 3.85 times its planned exposure to detect 1.2 percent, holding rho and the traffic mix fixed; put the other way, the plan as written carries only about 26 percent of the sample it needs.
Follow-up
- Your pre-period correlation is 0.62 on existing customers and near zero on customers onboarded in the last month. How do you report a single effect across both groups without the low-correlation group eating the gains?
- Someone proposes using a post-randomisation covariate that correlates 0.9 with the outcome. Why is that not a better CUPED covariate?
- If you winsorise, what do you say to a sponsor who points out that the capped customers are the ones the business cares about most?
Fraud losses appear to halve in recent transaction months
A weekly chart attributes fct_card_dispute cases to the requested_at month of the linked fct_payment_authorization row. The two most recent months show the first-chargeback rate falling by half, and a risk rule shipped six weeks ago. Columns: dispute_id, auth_id, dispute_category, dispute_stage, opened_at, disputed_amount_minor, liability_shift_flag, outcome, net_loss_minor, resolved_at. Decide whether the rule worked, and produce the version of the chart you would sign your name to.
Approach
- Separate the two dates explicitly. opened_at is when a case was filed, requested_at is when the transaction happened. Attributing by transaction month is the right causal choice and is exactly what makes the newest months structurally incomplete.
- Measure the filing lag rather than assuming it: the distribution of opened_at minus requested_at over fully developed months, split by dispute_category, and the age at which around 95 percent of cases have arrived.
- Build a development triangle of transaction month by months of development on cumulative case counts, and estimate age-to-age factors from the columns that are complete.
- Develop the immature months with those factors and plot the result as an estimate with a visible band, kept visually distinct from the matured series rather than blended into it.
- State the assumption the method needs: a stable development pattern across cohorts. A change in filing behaviour, merchant mix or the dispute team's own backlog breaks it, so inspect factor stability down each column before relying on the estimate.
- Only then evaluate the rule, comparing pre-change and post-change cohorts at equal development age.
Follow-up
- What leading indicator would you accept while the cohort matures, and what is its known bias?
- How does liability_shift_flag change which disputes you should expect to see in the first place?
- If the rule also blocked good transactions, where does that cost appear, and is any of it in this chart?
For someone who can already write the query and train the model but stalls when asked what to measure or whether a change is worth making. Metric definition and case structure come first; the technical work is kept as maintenance rather than the centre of the week.
Prepare, practise & reflect
One practical outcome each day. Spend longer where you need it.
0 / 7 done01Metric anatomy
- For three products you use daily, write one primary metric, two input metrics that plausibly move it, and one guardrail that would catch a cheap way of moving the primary at the cost of the product.
- For one of them, specify the metric precisely enough that two analysts would return the same number: numerator, denominator, unit of observation, time window, and how returning and deleted accounts are treated.
- Pick a ratio metric and write what happens to it when the denominator shrinks for reasons unrelated to the numerator, with a concrete example of that happening.
Deliverable: A one-page metric tree for one product, with the primary metric written as an unambiguous spec.
Practice prompt ↗Practice prompt ↗Practice prompt ↗Worked solution ↗02Diagnosing a drop without guessing
- Take the prompt "weekly active users fell 8 percent week over week" and write the segmentation plan before proposing any cause: platform, region, tenure cohort, acquisition channel, and whether the movement sits in the numerator or in a changed denominator.
- List the instrumentation failures that manufacture fake drops (a client release that stopped firing an event, a bot filter change, a shifted date boundary or timezone) and write the query that rules out each one.
- Rehearse stating the boring explanations first, seasonality and day-of-week composition, before reaching for a product cause.
Deliverable: A drop-diagnosis checklist short enough to recite from memory in under a minute.
Practice prompt ↗Practice prompt ↗Practice prompt ↗03Should we build it
- Take a feature idea and write it as a bet: what you believe is true, what would have to be true for it to pay off, the metric that would confirm it, and the effect size that would justify the engineering cost.
- Size the opportunity top-down and bottom-up, then reconcile the two numbers in writing instead of quoting whichever is friendlier.
- Write the counter-metric that would make you kill the feature even if it wins on the primary metric.
Deliverable: A one-page product memo ending in a decision rather than a list of considerations.
Practice prompt ↗Practice prompt ↗04The places aggregate numbers lie
- Construct a Simpson's paradox numerically: two segments where the treatment wins within each segment yet loses overall, and identify the shift in segment weights that causes it.
- Take a heavy right-tailed quantity such as revenue per user and write why the mean is the wrong summary, which percentile you would report instead, and what a moving mean with a stable median tells you.
- Write your definition of a session for the product from day one, then name two real behaviours it misclassifies.
Deliverable: One page holding a worked Simpson's paradox table and a session definition with its two known failure cases.
Practice prompt ↗Practice prompt ↗Worked solution ↗05Technical maintenance, aimed at metrics
- Solve four timed SQL prompts that all end in a ratio metric, so the question of grain stays live in every answer.
- Compute a 95 percent confidence interval for a proportion on a small sample, and state why the normal approximation is unreliable when either np or n(1 minus p) falls below roughly 10, along with which interval you would use instead.
- Take one metric from your day-one tree, write the query that computes it correctly, then write the query that computes it wrong in the most plausible way and explain how you would notice.
Deliverable: Four solved prompts plus a matched correct and plausible-wrong query for one metric.
Practice prompt ↗Practice prompt ↗06Turning engineering work into data science stories
- Write three project stories as situation, decision, trade-off, outcome, each carrying one number and one thing you got wrong.
- For the story you will lead with, prepare an answer to "what would you do differently" that names a decision you made, not a constraint you were handed.
- Practise the sentence that reframes a systems project as a question project: the question the work answered, ahead of the pipeline it shipped.
Deliverable: Three written stories with the lead story delivered aloud and timed under four minutes.
Practice prompt ↗Practice prompt ↗07Mock case and gap list
- Run a 40-minute mock case with someone playing a product manager who pushes back on your metric choice, and record it.
- Listen back and mark every moment you proposed a solution before the success metric existed.
- Rewrite those moments as the question you should have asked, and rehearse the first 90 seconds of the case until scoping comes before solving.
Deliverable: A recorded case plus a rewritten opening 90 seconds.
Practice prompt ↗Practice prompt ↗Worked solution ↗Expand any day for tasks and deliverables. Your progress is saved on this device.
A number you shipped turned out to be wrong, and someone had already acted on it. That is one of the most useful stories a data person can carry. What is being scored is how fast you noticed, who you told first, and what you changed in the process so the same class of error could not repeat quietly.
Describe a situation where you had to pivot your approach due to a cha…
Describe a situation where you had to pivot your approach due to a change in project scope or business requirements.
Approach
- Name the disagreement or constraint, and how you resolved it with evidence.
- State the situation in two sentences and spend the rest on your reasoning.
- Close with what you would do differently, concretely.
Follow-up
- How did you know the outcome was caused by your change?
- What would you do differently if you ran that project again?
Defend a vintage finding that contradicts the portfolio dashboard
The lending dashboard shows blended 90-plus days-past-due falling for four consecutive quarters while originations grew 60 percent. Using fct_loan_performance_monthly, you build a vintage view keyed on origination_month by months_on_book and find the three most recent vintages are worse than their predecessors at the same age. The business lead presents that dashboard weekly and pushes back hard, suggesting you picked favourable cohorts. You get one meeting and the vintage table. Present the finding so it survives the cherry-picking objection and ends in a decision.
Approach
- Reconcile before you contradict: show that aggregating your vintage table along the calendar diagonal reproduces the published blended series, so the disagreement is about age mix rather than about data quality.
- Make the mechanism arithmetic rather than rhetorical: a loan cannot reach 90 days past due before it is 90 days old, so rapid origination growth shifts weight onto young months-on-book where the rate is structurally near zero.
- Show every vintage rather than a selected pair, all indexed at months_on_book equal to 12, with cohort sizes printed beside each curve so nobody can claim the divergence rests on a thin cohort.
- Handle restructuring explicitly, because restructured_flag resets days_past_due: count each loan on its worst pre-restructure state, or recent vintages will look better than they are.
- Close on the decision rather than the chart: state what the divergence implies for the cutoff or the channel mix, and state in advance what evidence would make you withdraw the claim.
Follow-up
- Two cohorts differ at month 12. How do you separate a seasoning effect from a genuine credit-quality effect?
- Someone argues the recent vintages are simply a broker-channel mix shift. How do you test that, and what would confirm it?
Recommend a decision whose true outcome matures a year later
An underwriting rule change must be decided in six weeks. Its real outcome, the vintage 90-plus rate at months_on_book 12 in fct_loan_performance_monthly, matures in a year. The executive wants a yes or no, not a range. Randomising the credit decision across the whole population is not available. Name the leading indicator you would accept, state its bias and the direction of that bias, define the decision rule and stopping condition before any rollout starts, and say what reading would make you recommend reversing the change.
Approach
- Fix the readout before the rollout, because a readout chosen after the data arrives is a story rather than a decision rule: indicator, window, threshold and reversal condition all go in writing first.
- Choose the leading indicator on its measured relationship to the matured outcome in historical vintages rather than on availability. Early delinquency, typically the share reaching dpd_1_29 or missing a first scheduled payment by months_on_book 3, is the usual candidate, and you quantify how well it predicted the 12-month rate across past cohorts.
- State the bias and its direction plainly: early delinquency under-represents default that emerges later and is contaminated by servicing and payment-date effects, so treat it as a floor on risk rather than an estimate of it.
- Buy identification where full randomisation is unavailable: a narrow randomised approval band around the cutoff, or a staged rollout by channel or region read as a difference-in-differences, with the parallel-trends assumption stated and checked in the pre-period rather than assumed.
- Give the executive the binary they asked for with the trigger attached in the same sentence: yes, conditional on the month-3 indicator staying inside a stated band, with an automatic hold if it breaches.
Follow-up
- How would you validate that the month-3 indicator predicts the 12-month outcome, and what evidence would invalidate it mid-rollout?
- Compliance refuses a randomised band. What is your next-best identification strategy, and what precision do you lose by taking it?
- 01
Describe a situation where you had to pivot your approach due to a change in project scope or business requirements.
- 02
The lending dashboard shows blended 90-plus days-past-due falling for four consecutive quarters while originations grew 60 percent. Using fct_loan_performance_monthly, you build a vintage view keyed on origination_month by months_on_book and find the three most recent vintages are worse than their predecessors at the same age. The business lead presents that dashboard weekly and pushes back hard, suggesting you picked favourable cohorts. You get one meeting and the vintage table. Present the finding so it survives the cherry-picking objection and ends in a decision.
- 03
An underwriting rule change must be decided in six weeks. Its real outcome, the vintage 90-plus rate at months_on_book 12 in fct_loan_performance_monthly, matures in a year. The executive wants a yes or no, not a range. Randomising the credit decision across the whole population is not available. Name the leading indicator you would accept, state its bias and the direction of that bias, define the decision rule and stopping condition before any rollout starts, and say what reading would make you recommend reversing the change.
Is this an official A global Insurer interview guide?
No. It is PracHub's own research and practice material for the Data Scientist role at A global Insurer. Rounds and questions reflect what candidates have reported, not a process A global Insurer has published, and they change over time. Confirm the current format and scope with your recruiter.
PracHub interview research ↗How much time should I spend preparing for the coding portion?
Dedicate significant time to practicing SQL window functions and basic data manipulation in Python. The coding rounds are designed to be practical, so focus on accuracy and efficiency over complex, obscure algorithms.
PracHub interview research ↗What differentiates successful candidates?
The most successful candidates are those who can bridge the gap between technical output and business strategy. Show that you understand the "why" behind your work and its impact on the company's goals.
PracHub interview research ↗What is the company culture like for a Data Scientist?
A global Insurer values collaboration, intellectual curiosity, and rigorous analysis. You will be expected to work across departments, so being a strong communicator is just as important as being a strong coder.
PracHub interview research ↗How long does the entire process usually take?
While it can vary based on the team and seniority, the process is generally efficient. Expect the cycle from initial screen to final decision to unfold over a few weeks.
PracHub interview research ↗Sources & methodology 3 sources ↗
No official company page is cited. Rounds and questions come from candidate reports and PracHub editorial material; each source shows the date it was read.
- 01PracHub interview research ↗
PracHub editorial research into this company and role, maintained with this guide. Candidate-reported, not an employer publication.
PracHub page · Accessed 2026-09-22 - 02PracHub Data Scientist practice ↗
Cross-company practice questions for this role.
PracHub page · Accessed 2026-09-22 - 03PracHub interview preparation framework ↗
The framework the preparation plan follows.
PracHub page · Accessed 2026-09-22
Explore related engineering environments and compare the preparation focus.
1st Central Data Scientist Interview Questions & Guide 2026
Causal-inference exercises for 1st Central data scientist prep: difference-in-differences, matching, instrumental variables, and knowing when observational data simply cannot answer the question asked.
3M Data Scientist Interview Questions & Guide 2026
Communication practice for 3M data scientist candidates: turn an analysis into a recommendation, name the uncertainty honestly, and answer the follow-up a skeptical stakeholder will raise.
ValueLabs Data Scientist Interview Questions & Guide 2026
Causal-inference exercises for ValueLabs data scientist prep: difference-in-differences, matching, instrumental variables, and knowing when observational data simply cannot answer the question asked.
vConstruct Data Scientist Interview Questions & Guide 2026
Communication practice for vConstruct data scientist candidates: turn an analysis into a recommendation, name the uncertainty honestly, and answer the follow-up a skeptical stakeholder will raise.