As a Data Scientist at Accor, you are at the intersection of global hospitality operations and advanced analytical innovation. Your work directly influences how one of the world's largest hotel groups optimizes guest experiences, manages revenue streams, and refines its loyalty programs. By leveraging data at scale, you translate complex business challenges into actionable models and insights that drive decision-making across the organization.
This role is critical to the Accor mission of delivering personalized, high-quality hospitality. You will work within a sophisticated AI and data ecosystem, tackling problems ranging from demand forecasting and pricing optimization to customer segment behavior analysis. You should expect to operate in a fast-paced environment where your ability to bridge the gap between technical rigor and business impact is the primary driver of your success.
Initial Screening
reportedA screening call is a matching exercise run by someone who will not evaluate your statistics. They are checking that the work described on your resume is work you personally did, and that its scope matches the level the role is written for. Logistics get settled in the same half hour so nobody spends an interviewer's afternoon on a mismatch. The answer that fails is the one narrated in the plural. If every sentence is 'we built' and 'the team decided', there is nothing specific to write down about you. Name the piece that was yours, the decision you made inside it, and what changed after.
What to demonstrate
- Whether the ownership implied by your resume survives one round of follow-up about who actually did which part
- Whether your described scope (data size, stakeholders, what shipped) matches the seniority the role is written at
- Whether timeline, location and compensation expectations make the rest of the loop worth scheduling
How to prepare
- Rewrite your top three resume bullets in the first person singular, each with the decision you made and what moved afterwards, then say them out loud once so the 'we' does not return under pressure
- Attach one number to each project: the baseline, the change, and the window it was measured over. Where impact was never measured, say that plainly rather than inventing a figure
- Settle your compensation range before the call and give it as a range with a reason behind it, such as current total comp or a competing timeline, instead of deflecting the question twice
Technical Round
reportedA handful of shapes account for most of what gets asked in this format: a ranking or deduplication inside groups, a running or rolling total, a period-over-period comparison, and a cohort tracked forward over time. Recognising the shape quickly is most of the speed here; deriving it from scratch while a clock runs is where the time goes. Know that a window function keeps every row while a GROUP BY collapses them, and know which one the question needs. If the exercise is in Python instead of SQL, the same shapes arrive as groupby with transform, shift and merge, and the same grain mistakes are available.
What to demonstrate
- Whether you reach the right construct without a detour, such as ROW_NUMBER over a partition to deduplicate instead of a self-join against a MAX subquery
- Whether you know what your window frame actually is, since adding ORDER BY inside OVER changes the default frame and silently changes a running total
- Whether the thing runs. A near-miss that throws an error scores below a plainer query that returns the right rows.
How to prepare
- Write each of the four shapes once from memory against a small schema and keep the working version somewhere you will reread it: dedupe with ROW_NUMBER, a running total, a month-over-month change with LAG, and a retention table
- Compute one running total twice on data with tied timestamps, once on the default frame and once with ROWS BETWEEN UNBOUNDED PRECEDING AND CURRENT ROW, and look at where the two disagree
- If Python is on the table, rebuild the dedupe and the running total with groupby and cumsum, then assert the two implementations return identical rows
Final Leadership Interviews
reportedWhere a loop includes a partner from outside the data team, that conversation usually carries the same weight as the technical ones and gets the least preparation. The person opposite you will not follow a derivation and does not need to. They are working out whether having you involved would make their decisions better or slower. The failure mode is not being too technical. It is answering a question about a decision with a description of your method, leaving the translation to them. What they carry into the debrief is the sentence you handed them, not the analysis underneath it.
What to demonstrate
- Whether a statistical result arrives as something the partner could act on, with the one caveat that would change their decision kept and the rest left out
- Whether you can state what you need from their side, in their terms: instrumentation that does not exist yet, a definition they own, or a holdout they have to agree to
- Whether uncertainty is given as a range someone can plan against, rather than as hedging that invites them to ignore the result
- Whether you ask what decision is actually on the table before explaining anything
How to prepare
- Take a result you know well and write the version for someone who stops reading after one sentence, then the three-minute version, and check the short one is not the long one with the qualifications stripped out
- For a past project, list everything you asked a non-technical partner for and how you phrased it, then rewrite each ask so it names what goes unmeasured without it
- Practise saying where a result does not apply, out loud, in one sentence that a partner could repeat accurately to someone else
PracHub editorial advice for the preparation topics above.
Counting on an identity key that changes underneath the metric
visitor_id is per browser and per device, and it resets on cookie clearance, private browsing and platform privacy changes, so the distinct-visitor count drifts upward for reasons unrelated to reach. Any rate with visitors in the denominator therefore decays over time even when behaviour is constant, and any rate with visitors in the numerator inflates. The stitching at signup makes it worse in both directions: a user who signed up on mobile and returns on desktop is two visitors and one user, while a shared device is one visitor and several users. Decide which key each metric is counted on, write it into the definition, and when comparing a period before and after a platform privacy change, expect a level shift in every visitor-keyed metric and do not attribute it to the product.
Slicing a flat experiment until a segment reaches significance
Testing one metric across twenty segments at a nominal 5% level produces a significant result about two thirds of the time when nothing is happening anywhere, and the segment that surfaces is by construction the one with the most favourable noise. The reported effect in that slice is then badly overstated, because selection on significance conditions the estimate on being large. What makes it dangerous rather than merely wrong is that a post-hoc segment always has a plausible story attached, so it survives the meeting. The controls are declaring the small number of segments of interest before launch, correcting across the ones tested, and treating anything discovered afterwards as a hypothesis that needs its own adequately-powered test rather than a finding.
Solving silently instead of narrating the reasoning
Say which branch you are taking and why you chose it over the alternative, for example checking the denominator first because it changes what the comparison means. A correct answer that arrives with no visible path scores below a rigorous one that needed a hint.
Generalising beyond the population the sample actually supports
State the frame the sample was drawn from and where it diverges from the population you want to talk about: time window, platform, geography, opt-in. If a group is excluded from the frame, either weight to known margins or narrow the claim rather than quietly extending it.
Choose a category, try a prompt, then open its approach, worked solution or follow-up when you need it.
Explain the trade-offs between precision, recall, and the F1-score whe…
Explain the trade-offs between precision, recall, and the F1-score when evaluating a classification model.
Approach
- Frame the prediction: the label, the moment of prediction, and the action it triggers.
- Check what information would not exist at prediction time, and exclude it.
- Pick an evaluation metric that matches the cost of each error type, not a default.
Follow-up
- How would you choose the decision threshold, and who owns that choice?
- Where could label leakage enter this setup?
Split a pooled conversion drop into rate and mix
You have weekly visit-to-signup counts by segment: a DataFrame with week, device_type, referrer_channel, visitors and signups. The pooled rate fell 0.84 percentage points between two consecutive weeks while several individual segments rose. Write a function that, for a caller-supplied list of segment columns, splits the pooled change into a rate effect, a mix effect and an interaction term that sum exactly to the observed change. Return those three scalars plus a per-segment contribution table sorted by absolute contribution, so the largest single driver can be named.
Approach
- State the algebra before coding: the pooled rate is r = sum over segments of w_s * r_s, with w_s the segment's share of the denominator. Then r1 - r0 decomposes exactly into sum(w_s0 * (r_s1 - r_s0)) for rate, sum((w_s1 - w_s0) * r_s0) for mix, and sum((w_s1 - w_s0) * (r_s1 - r_s0)) for interaction. The identity is per-segment, so it holds for any numbers you put in the four slots.
- Pivot both weeks onto a common segment index with an outer join so a segment that appeared or vanished is kept rather than dropped, then decide what rate to give a segment with no visitors in one of the weeks, and document the choice. The identity stays exact either way because the missing week's weight is 0, but the attribution does not. Filling the missing rate with 0 sends an appearing segment's entire w_s1 * r_s1 into the interaction term, since w_s0 = 0 makes both the rate term and the mix term (w_s1 - w_s0) * r_s0 identically zero; a vanishing segment then splits as -w_s0 * r_s0 in rate, -w_s0 * r_s0 in mix and +w_s0 * r_s0 in interaction.
- The convention used below instead imputes the missing week's rate as that week's pooled rate. A vanishing segment then lands wholly in mix at -w_s0 * r_s0, with rate and interaction cancelling; an appearing segment puts w_s1 * r_pooled0 in mix (volume arriving at the average rate) and only w_s1 * (r_s1 - r_pooled0) in interaction (its rate differing from that average). Impute by which week the segment is missing from, never by argument order, or the swap identities below stop holding.
- Guard the division where visitors is 0 so no NaN enters the vectors, because a single NaN poisons every sum. A segment with zero visitors in both weeks contributes exactly 0 and can be dropped; a segment missing from only one week does not contribute 0, and where its contribution lands is settled by the convention above, not by the guard.
- Compute the three components as vectors over segments, then sum. Keep the vectors, because the per-segment contribution table is what turns the decomposition into an explanation.
- Assert that the three components sum to the observed pooled change within floating-point tolerance. This identity is exact, so a mismatch means an implementation bug, not a modelling judgement.
Worked solution 25 min
- Aggregate to one row per (week, segment tuple) with summed visitors and signups, then split into w0 and w1 frames and align with an outer join, filling missing visitors and signups with 0.
- Compute w_s = visitors / visitors.sum() within each week, and r_s = signups / visitors only where visitors > 0. Where a week's visitors are 0, set that week's r_s to that week's pooled rate, the stated convention; never leave it NaN.
- rate_effect = (w0 * (r1 - r0)).sum(); mix_effect = ((w1 - w0) * r0).sum(); interaction = ((w1 - w0) * (r1 - r0)).sum().
- contribution = w0*(r1-r0) + (w1-w0)r0 + (w1-w0)(r1-r0) per segment, which reduces to w1r1 - w0r0; sort by abs and return the head.
- assert abs(rate + mix + interaction - (pooled1 - pooled0)) < 1e-12.
Follow-up
- The mix effect accounts for 0.71 of the 0.84 point drop, driven by paid_social volume. What is your recommendation, and what would change it?
- Why is a two-way split into a counterfactual rate and a residual also exact, and when would you prefer it to the three-way version?
- Segmenting on device and channel leaves a large interaction term. What does that tell you about the choice of segments?
Implement seven-day activation from its written definition
Implement the seven-day activation rate. Inputs: dim_user with user_id, account_created_at_utc and is_internal; fct_event with user_id, occurred_at_utc and is_core_action. A user activates when core-action events carrying a non-NULL user_id fall on at least two distinct UTC dates inside [account_created_at_utc, account_created_at_utc + 7 days). The denominator is every non-internal user whose account_created_at_utc lands in the cohort week, including users with no events at all. Return one row per cohort week with numerator, denominator and rate, publishing only weeks whose last signup is at least eight days old.
Approach
- Build the denominator first, from dim_user alone, filtered on is_internal = False. Deriving it from the join is the standard way to lose every user who never fired an event, which is exactly the population the metric is about.
- Join events to users on user_id with a left join from the user side, then apply the window as a half-open interval: occurred_at >= created AND occurred_at < created + 7 days. The right bound is exclusive, so an event at exactly created + 7 days does not count.
- Count distinct UTC dates per user, not distinct events. Floor occurred_at_utc to date before the nunique, and do it in UTC rather than local time so the threshold does not move with the user's country.
- Apply the >= 2 threshold, aggregate to cohort week, and compute the rate by re-summing numerator and denominator per week rather than averaging any per-user or per-day rate. Fix the week anchor explicitly: cohort_week is the Monday of the signup week in UTC, which is what Postgres DATE_TRUNC('week') returns and what any SQL version of this metric will produce. In pandas, subtract dt.weekday days from the floored timestamp. If you reach for periods instead, the anchor that matches is to_period('W') (equivalently 'W-SUN'), whose weeks end Sunday and therefore start Monday; to_period('W-MON') labels weeks that end on Monday, so it runs Tuesday through Monday and its start_time is a Tuesday. Mixing the two shifts every cohort label by one day and silently moves Mondays into the previous week.
- Suppress immature weeks: drop any cohort week whose maximum account_created_at_utc is within 8 days of the data cut, and return them as absent rather than as a partial number.
Follow-up
- The threshold is 2 distinct days. What changes in the reported history if someone moves it to 3, and how would you publish that change?
- Invited seats and SSO-provisioned users have no pre-signup session. Should they be in this denominator at all, and what does including them do to the rate for sales-assisted accounts?
- How would you produce the same metric at account grain, and which of the two would you put on the dashboard?
Can you explain how to optimize a slow-running query on a complex mult…
Can you explain how to optimize a slow-running query on a complex multi-join table?
Approach
- Handle the rows that do not match: a LEFT JOIN with a NULL check is usually the question.
- Say which table is the grain you start from, and join outward from it.
- State the window function and its partition and ordering out loud before writing it.
Follow-up
- How would you verify this result without re-running the same query?
- How does the query change if the join becomes one-to-many?
Write a query using SQL window functions to calculate a rolling averag…
Write a query using SQL window functions to calculate a rolling average of room occupancy over the last 30 days.
Approach
- Compute rates by summing numerator and denominator separately, never by averaging rates.
- State the window function and its partition and ordering out loud before writing it.
- Say which table is the grain you start from, and join outward from it.
Follow-up
- How does the query change if the join becomes one-to-many?
- What breaks if events arrive late or out of order?
How would you handle missing data in a large-scale reservation dataset…
How would you handle missing data in a large-scale reservation dataset?
Approach
- Handle the rows that do not match: a LEFT JOIN with a NULL check is usually the question.
- Check whether any join is one-to-many before aggregating, or the sums inflate.
- Compute rates by summing numerator and denominator separately, never by averaging rates.
Follow-up
- How does the query change if the join becomes one-to-many?
- What breaks if events arrive late or out of order?
Find reactivation gaps in account paid-period history
fct_subscription_period holds account_id, subscription_id, period_start_utc, period_end_utc, period_status and change_reason. A mid-period plan or seat change closes one row and opens another, so a single continuous paid tenure is often many rows, and an account may hold two overlapping subscriptions. Collapse rows with period_status in ('active','past_due') into continuous tenures per account, treating gaps of three days or less as continuous. Return account_id, tenure_start, tenure_end, and for every tenure after the first, the gap in days that preceded it.
Approach
- Filter to paid rows only: period_status IN ('active','past_due'). Trialing periods are not tenure, and including them turns every trial that never converted into a one-period tenure followed by a fake churn.
- Order by period_start_utc and take a running maximum of all prior ends: MAX(period_end_utc) OVER (PARTITION BY account_id ORDER BY period_start_utc, period_end_utc, subscription_id ROWS BETWEEN UNBOUNDED PRECEDING AND 1 PRECEDING). Those three columns are the only stable ordering this schema exposes, so check first that they are unique within an account; if rows tie on all three, the island numbering is order-dependent between runs and you need a real row key before the result is reproducible.
- LAG on its own is wrong here because with overlapping or nested periods the immediately preceding row by start date is not the one that ends latest, so the running maximum is the part that cannot be shortcut.
- Flag a new island when prior_max_end IS NULL OR period_start_utc > prior_max_end + interval '3 days', then number islands with a running SUM of the flag over the same ordering and an explicit ROWS frame.
- Group to (account_id, island) taking MIN(period_start_utc) and MAX(period_end_utc), then LAG(tenure_end) OVER (PARTITION BY account_id ORDER BY tenure_start) to compute the preceding gap in days for every tenure after the first.
- Sanity-check with change_reason, which is the only lineage this schema carries: list its distinct values first, then confirm that rows recording a plan or seat change sit inside a tenure rather than opening one, and that every tenure after the first opens on a row whose reason records a restart rather than an ordinary renewal. Do not reconcile against a churn timestamp on dim_account, which this schema does not define; and where such a column does exist, a cancellation timestamp records when the request was made and routinely sits weeks before the period it ends.
Worked solution 35 min
- Find an account with a known mid-period upgrade and dump its period rows to use as the trace case.
- Check that (period_start_utc, period_end_utc, subscription_id) is unique per account, since the whole ordering rests on it.
- Write the paid-rows CTE and the running MAX with the explicit frame.
- Add the island flag and the running SUM, then verify the trace account yields one island.
- Group to tenures and add the LAG-based gap in days.
- List the distinct change_reason values, then count accounts with more than one tenure and compare against the count of accounts carrying a restart-flavoured reason anywhere in their history.
Follow-up
- Why three days of grace? What do 0 and 30 days each do to the count of accounts classed as reactivated?
- An account runs two concurrent subscriptions for different teams. One tenure or two, and what does the revenue reader expect?
- How would you turn these tenures into a monthly gross logo churn series without double-counting an account that churned and returned in the same month?
How do you prioritize between two competing product features when both…
How do you prioritize between two competing product features when both have positive but different data signals?
Approach
- Fix the population and the time window before naming any metric.
- Decompose the metric into the rates that drive it, and say which one you would check first.
- Restate the decision this analysis has to support, and who acts on the answer.
Follow-up
- Which segment would you cut first, and what would that rule out?
- What would you do if the primary metric and the guardrail moved in opposite directions?
How would you design a metric to measure the success of a new loyalty …
How would you design a metric to measure the success of a new loyalty program feature?
Approach
- Decompose the metric into the rates that drive it, and say which one you would check first.
- Name one primary metric, then the guardrail that stops it being gamed.
- Fix the population and the time window before naming any metric.
Follow-up
- How would you detect that the metric is being gamed rather than genuinely improving?
- What would you do if the primary metric and the guardrail moved in opposite directions?
How do you determine the required sample size to reach statistical sig…
How do you determine the required sample size to reach statistical significance for a pricing experiment?
Approach
- State the primary metric and the minimum effect worth shipping, then size the test.
- Say whether units interfere with each other, and switch design if they do.
- Name the randomisation unit first; it decides the variance and what the test can detect.
Follow-up
- What would you do if you could not randomise at all?
- How would you handle interference between treated and control units?
What are the most common experimentation pitfalls that could invalidat…
What are the most common experimentation pitfalls that could invalidate your A/B test results?
Approach
- Name the randomisation unit first; it decides the variance and what the test can detect.
- State the primary metric and the minimum effect worth shipping, then size the test.
- Name the guardrails that would stop a launch even on a positive primary result.
Follow-up
- What would you conclude if the result is positive but the test is underpowered?
- What would you do if you could not randomise at all?
If you observe a sudden drop in hotel booking conversion rates, how wo…
If you observe a sudden drop in hotel booking conversion rates, how would you investigate the root cause?
Approach
- State your assumptions explicitly before working the problem.
- Work from the decision backwards to the evidence you would need.
- Say what you would check first and why it is the highest-information step.
Follow-up
- How would you know your answer was wrong?
- What assumption would you test first?
A test that won on day four and lost by day twelve
A two-week test was checked every morning. On day four the primary metric crossed p = 0.03 and the team shipped. By day twelve, with logging still running, the estimate had fallen to a 0.2% lift at p = 0.61. The day-four deck also reported a significant 9% lift among paid_search visitors on mobile_web, one of twenty segments inspected. Explain both patterns quantitatively, say what the day-four evidence was actually worth, and specify the monitoring rule that prevents a repeat.
Approach
- Price the peeking. A fixed-sample test controls type I error at one pre-declared look. Ten daily looks at a nominal 5% raise the false positive rate to roughly 0.15 to 0.20, because the running test statistic takes a random walk that will eventually cross the boundary under the null.
- Price the winner's curse separately, because it is a different error. Conditioning an estimate on having crossed the threshold biases it away from zero, by a factor of roughly 3 when true power is 20% and only about 1.1 at 80% power. Day four sits at roughly 29% of planned information, which is exactly the low-power case.
- Read day twelve as the better estimate rather than as a contradiction. Nothing regressed; the day-four value was an extreme draw that was selected precisely for being extreme.
- Price the segment claim. Across twenty segments at a nominal 5%, at least one crosses about 64% of the time under a global null, since 1 - 0.95^20 = 0.64, and the slice that surfaces is by construction the one with the most favourable noise.
- Specify the rule instead of scolding. Either fix the horizon and look once, or use group-sequential boundaries such as O'Brien-Fleming that spend almost no alpha early, or use always-valid confidence sequences that stay correct under continuous monitoring. Pre-register the small set of segments, correct across the ones tested, and treat anything found afterwards as a hypothesis needing its own powered test.
Worked solution 25 min
- Count the looks actually taken, twelve daily, and state the inflated alpha band of 0.15 to 0.20 for ten looks, rising with more.
- Place day four on the information fraction, about 4/14 = 29% of planned sample, and apply the exaggeration factor for low power.
- Compute 1 - 0.95^k for the number of segments actually inspected; with k = 20 this is 0.64.
- Report the day-twelve interval as the estimate and say plainly that the experiment supports no effect at any size the team would ship for.
- Write the rule into the experiment template: horizon and segments declared at launch, sequential boundaries if interim looks are needed at all.
Follow-up
- Under O'Brien-Fleming with five planned looks, roughly what nominal p-value would the first look have needed to stop?
- The feature already shipped. What analysis can you still run, and what can it not tell you?
- If mobile_web paid_search were genuinely the only affected segment, how would you design the confirmatory test and how large would it have to be?
Tell a pipeline outage from a collapse in usage
Weekly active accounts completing a core action fell 9%, and almost the entire fall sits in accounts whose events carry surface = 'ios'. App crash rates and store reviews are unchanged. You have fct_event with occurred_at_utc, received_at_utc, event_name, is_core_action, app_version and surface, plus fct_session and the ingestion job run log. Establish within the hour whether iOS engagement fell or iOS events stopped arriving, name the evidence that distinguishes them, and say what you would publish on the dashboard in the meantime.
Approach
- Compare the event-name composition inside surface = 'ios' against the prior four weeks as shares, not counts. A behaviour collapse scales most event names together; a dropped event definition or a broken downstream filter hits specific event_name values while page_view and session-opening events hold steady. That shape difference is the fastest discriminator available.
- Profile the received_at_utc minus occurred_at_utc distribution per day for surface = 'ios'. A stalled-then-backfilling pipeline shows a fat upper tail and a recovering p99; a silently dropped stream shows an unchanged lag distribution over a smaller volume. The two failure modes have different remedies and different histories.
- Cut by app_version. A logging SDK change arrives with one build and ramps with its adoption curve; an infrastructure fault arrives across every build within the same hour. Checking this costs one group-by and rules out half the hypothesis space.
- Cross-check against a signal that does not travel the suspect path: server-emitted events with session_id NULL, and subscription or billing activity for the same accounts. If those accounts are still transacting, the users did not leave.
- Publish an ex-iOS total with an explicit annotated break rather than a blended total. A blended number during a known ingestion gap is wrong in a direction you can already name, and republishing it daily spreads the artefact into every downstream report.
Follow-up
- Suppose the events do eventually backfill. What is your policy for restating the published weekly numbers, and who needs to be told?
- What monitor would have caught this before a human noticed the weekly metric, and what would it alert on?
- If is_core_action is maintained in the tracking plan, what governance would stop a change to that list from silently moving a north-star metric?
Instead of guessing where the week should go, day one measures it under a fixed rubric and allocates the remaining hours in proportion to the gaps. The method is deliberately rigid: the allocation is written down before any studying starts and is not renegotiated when a topic turns out to be unpleasant.
Prepare, practise & reflect
One practical outcome each day. Spend longer where you need it.
0 / 7 done01Diagnostic, scored before you study anything
- Sit a 100-minute timed diagnostic in four blocks: 30 minutes of SQL across three prompts, 25 minutes of short-answer statistics, 25 minutes on one modelling or case prompt, and 20 minutes delivering one behavioural story aloud.
- Score each block from 0 to 3 on a fixed rubric where 3 is correct and fluent, 2 is correct but slow or prompted, 1 is partially correct, and 0 is stuck, grading the output rather than how the attempt felt.
- Allocate the hours for days two to five roughly in proportion to 3 minus the score in each block, write the allocation down, and commit to not revising it midweek.
Deliverable: A scored rubric and a fixed hour allocation for the rest of the week.
Practice prompt ↗Practice prompt ↗Practice prompt ↗Worked solution ↗02Largest gap: find the boundary rather than the subject
- Break the weakest area into five named sub-skills (for query work: grain control, window frames, date arithmetic, set logic with NULLs, and reading a query plan) and rate each one, so the rest of the week targets a sub-skill instead of a subject.
- Solve three problems chosen to sit just above where the rating drops off, and for each write the first move you failed to make.
- Re-solve one of them from memory four hours later, on paper, with nothing open.
Deliverable: A five-item sub-skill map with the two blocking sub-skills circled.
Practice prompt ↗Practice prompt ↗Practice prompt ↗03Largest gap: drill the blocking sub-skill
- Do eight short repetitions of the same shape rather than eight different problems, so what you practise is the pattern and not the puzzle.
- Write the rule you now hold in one sentence, then test it against a case built to break it: a ranking function over a column with ties, or a two-sample test on observations that are obviously dependent.
- Have someone else read your one-sentence rule and find the precondition you left out.
Deliverable: One rule statement with its preconditions attached and one counterexample that would have caught the incomplete version.
Practice prompt ↗Practice prompt ↗Practice prompt ↗04Second gap, plus maintenance on your strongest area
- Run the same sub-skill map and boundary protocol on the second-largest gap, compressed into half the day.
- Spend 25 timed minutes on your strongest area to stop it decaying, choosing the hardest problem you can still finish rather than an easy warm-up.
- Compare how the two areas fail: whether you lose time on recall, on setup, or on arithmetic, because the fix differs for each.
Deliverable: A second sub-skill map plus a one-line diagnosis of how each area fails you.
Practice prompt ↗Practice prompt ↗Worked solution ↗05The gap that is not a skill
- Record yourself answering one technical and one behavioural prompt, then count two things in the playback: how many seconds before your first clarifying question, and how many sentences you started without knowing where they ended.
- Rewrite your three most-used stock phrases into shorter versions, and practise saying "I do not know, here is how I would find out" without softening it into a guess.
- Deliver one answer again with a hard 90-second limit to force structure before detail.
Deliverable: Two recordings with a counted improvement in time-to-first-question.
Practice prompt ↗Practice prompt ↗06Retest under day-one conditions
- Sit the same 100-minute diagnostic structure with new prompts of comparable difficulty and score it on the identical rubric.
- Compare block by block, and for any block that did not move, change the method rather than adding hours: a block stuck at 1 usually means the practice was too varied, not too short.
- Write which single block you would still lose the offer on.
Deliverable: A second scored rubric placed next to the first, with one named remaining risk.
Practice prompt ↗Practice prompt ↗07Full loop under interview conditions
- Run a 60-minute mock covering the two blocks that moved least, with an interviewer instructed to interrupt and change direction.
- Write your recovery script for the moment you go blank: restate the question, state your assumption, name the first thing you would check.
- Reduce the week to the rule statements you wrote, each with its preconditions attached, then say every one of them out loud without reading it and cut any you cannot state in a single sentence, since a rule you have to reconstruct mid-answer will not survive being interrupted.
Deliverable: A one-page card holding the recovery script and only the rules you could state from memory.
Practice prompt ↗Practice prompt ↗Worked solution ↗Expand any day for tasks and deliverables. Your progress is saved on this device.
Data people depend on systems owned by other teams, and much of the job is negotiating for instrumentation, access, or a fix to a broken pipeline. Prepare an example of getting something changed upstream that you did not control. Describe what you asked for, what you traded, and how you worked while you waited.
How would you explain the concept of a p-value to a non-technical stak…
How would you explain the concept of a p-value to a non-technical stakeholder?
Approach
- Name the disagreement or constraint, and how you resolved it with evidence.
- Close with what you would do differently, concretely.
- Quantify the outcome, including what you would not claim credit for.
Follow-up
- How did you know the outcome was caused by your change?
- What did you decide not to do, and why?
Disagree with a product manager's roadmap claim using data
A product manager proposes building a feature on the argument that accounts connecting an integration in week one retain three times better at week four. The figure is correctly computed from dim_user and fct_event, and it has already been shown to leadership. You have one scheduled 1:1 before the roadmap locks. Deliver the specific analysis you would run to test whether the relationship is causal, the result that would change your own mind, and how you open the conversation so that the PM is not put in the position of defending the number in public.
Approach
- Recognise what is being probed: whether you can separate a number being right from an inference being wrong, and do it without costing the PM face. The generic answer recites that correlation is not causation; the strong one names the specific confound and proposes the cheapest design that could distinguish the explanations.
- State the alternative concretely. Accounts that connect an integration in week one are accounts that already have a workflow and a technical owner, so week-one intent plausibly drives both the connection and week-four retention. The selection is on intent, which no amount of post-hoc adjustment observes.
- Order the discriminating analyses by cost. First, condition on pre-connection activity by comparing retention within strata of week-one core-action count, which removes the crude version of the confound but not unobserved intent. Second, look for variation in integration availability that was unrelated to intent, such as a staggered release or an outage window. Third, an encouragement design that randomises a prompt to connect and reads the intent-to-treat effect on week-four retention, which is the only version that identifies an effect.
- Run the timing check, because it is nearly free and it is the most persuasive single piece of evidence. If the retention advantage among connectors is already visible before any of them connected, the causal story is largely finished.
- Pre-commit to what would change your mind and say it before you show anything: if the gap survives stratification and the encouragement arm moves week-four retention at all, the feature has a case and you will say so.
- Open the 1:1 by agreeing with the true part, that the correlation is real and worth chasing, then ask what effect size the roadmap plan assumes. That makes the size of the claim the topic instead of its authorship.
Follow-up
- The encouragement test needs six weeks and the roadmap locks in two. What do you recommend in the interim?
- Stratifying on week-one activity closes half the gap. What do you conclude, and what do you still not know?
- How would you word this in the roadmap document so the PM's original number is reframed rather than deleted?
Turn an ambiguous onboarding question into a measurable metric
Two days before a planning review, a director asks whether onboarding is working. You have dim_user (account_created_at_utc, signup_surface, is_internal), fct_event (is_core_action, flow_id, flow_instance_id, event_name, occurred_at_utc, received_at_utc) and fct_session. No further meeting with the director is possible before you start work. Deliver three clarifying questions you would send in writing, the metric you will compute in the meantime with its numerator, denominator, window and exclusions, and one sentence naming the question you are deliberately not answering.
Approach
- Recognise what is being probed: whether you convert a goal into a computable predicate without stalling for requirements or guessing in silence. Listing clarifying questions is the generic answer; shipping a defensible default alongside them is the strong one, because the review is in two days and it will happen with or without you.
- Infer the decision behind the request. A question about whether onboarding works, arriving before a planning cycle, usually means whether to staff it next quarter. That points at a rate with visible headroom over several cohorts, not at a descriptive dashboard.
- Write the three questions so that each one changes the SQL. Which population, all signups or only self-serve from dim_user.signup_surface. What counts as working, reaching a core action or completing the onboarding flow_id. Against what bar, last quarter's cohorts or a stated target.
- Propose the default explicitly: seven-day activation on weekly signup cohorts. Numerator, users with is_core_action = TRUE events on at least two distinct UTC dates inside [account_created_at_utc, account_created_at_utc + 7 days). Denominator, the signup cohort with is_internal = FALSE. Publish with an eight-day lag, and state that the two-distinct-days threshold is a frozen choice rather than a discovery.
- Name the exclusion in the same breath as the number. The series shows whether users activate; it does not establish that onboarding caused the level, which needs a staged rollout or an experiment.
Follow-up
- The director replies that they meant the onboarding flow specifically, not activation. What changes in the query and in the caveats?
- Your cohort metric needs an eight-day lag and the review is in two days. What do you present, and how do you label it?
- Two of your three questions come back unanswered. Which one do you refuse to proceed without?
- 01
How would you explain the concept of a p-value to a non-technical stakeholder?
- 02
A product manager proposes building a feature on the argument that accounts connecting an integration in week one retain three times better at week four. The figure is correctly computed from dim_user and fct_event, and it has already been shown to leadership. You have one scheduled 1:1 before the roadmap locks. Deliver the specific analysis you would run to test whether the relationship is causal, the result that would change your own mind, and how you open the conversation so that the PM is not put in the position of defending the number in public.
- 03
Two days before a planning review, a director asks whether onboarding is working. You have dim_user (account_created_at_utc, signup_surface, is_internal), fct_event (is_core_action, flow_id, flow_instance_id, event_name, occurred_at_utc, received_at_utc) and fct_session. No further meeting with the director is possible before you start work. Deliver three clarifying questions you would send in writing, the metric you will compute in the meantime with its numerator, denominator, window and exclusions, and one sentence naming the question you are deliberately not answering.
Is this an official Accor interview guide?
No. It is PracHub's own research and practice material for the Data Scientist role at Accor. Rounds and questions reflect what candidates have reported, not a process Accor has published, and they change over time. Confirm the current format and scope with your recruiter.
PracHub interview research ↗How long should I spend preparing for the technical round?
Given the depth of the assessment, dedicate at least 2–3 weeks to practicing SQL window functions and reviewing core A/B testing principles. Consistent, focused practice is more effective than last-minute cramming.
PracHub interview research ↗What is the most important trait for a successful candidate?
Aside from technical skill, the ability to think critically about business problems is paramount. Successful candidates are those who can connect a data finding to a specific business outcome.
PracHub interview research ↗Is the culture at Accor collaborative?
Yes, the environment is highly team-oriented. You will be working with cross-functional partners daily, so emphasize your experience in collaborative settings during your behavioral interviews.
PracHub interview research ↗What is the typical timeline for the process?
While it varies, the three-round process is generally completed within a few weeks. Maintain open communication with your recruiter to stay informed on your status.
PracHub interview research ↗Sources & methodology 3 sources ↗
No official company page is cited. Rounds and questions come from candidate reports and PracHub editorial material; each source shows the date it was read.
- 01PracHub interview research ↗
PracHub editorial research into this company and role, maintained with this guide. Candidate-reported, not an employer publication.
PracHub page · Accessed 2026-09-22 - 02PracHub Data Scientist practice ↗
Cross-company practice questions for this role.
PracHub page · Accessed 2026-09-22 - 03PracHub interview preparation framework ↗
The framework the preparation plan follows.
PracHub page · Accessed 2026-09-22
Explore related engineering environments and compare the preparation focus.
Fetch Rewards Data Scientist Interview Questions & Guide 2026
Product-sense practice for a Fetch Rewards data scientist interview: define a product and business analytics metric, pick its guardrails, and argue why a tempting alternative would mislead you.
1 digit technology Pvt Data Scientist Interview Questions & Guide 2026
Take-home style practice for data scientists preparing for 1 digit technology Pvt: a messy dataset, a fixed time budget, and a written analysis, reviewed for whether it states its assumptions and whether a reader could reproduce your number
xAI Data Scientist Interview Questions & Guide 2026
Communication practice for xAI data scientist candidates: turn an analysis into a recommendation, name the uncertainty honestly, and answer the follow-up a skeptical stakeholder will raise.
Windfall Data Scientist Interview Questions & Guide 2026
Data-quality drills for Windfall data scientist prep: survivorship and selection bias, leakage through time-ordered features, and extreme values where provenance decides the call. A logging fault or unit slip gets corrected or dropped; a ge