A Software Engineer at AIEnterprise builds, scales, and maintains the platforms that power the company's client solutions. The work combines complex architectural design with high-performance implementation, so that AIEnterprise's software meets the demands of modern enterprise environments.
The role goes beyond writing code to solving systemic problems that affect AIEnterprise's product reliability and user experience. Whether you are optimizing backend services, implementing sophisticated e-commerce structures, or integrating advanced AI capabilities, your work will directly contribute to the scalability and efficiency of AIEnterprise products. You can expect to operate in a fast-paced, collaborative environment where technical depth and the ability to translate business requirements into elegant code are highly valued.
Initial Screening
reportedThe person on this call usually cannot evaluate your code and does not need to. They write a short paragraph, and that paragraph is what a hiring manager skims when deciding who to put on your loop. So the test is not whether your work was hard, it is whether a non-engineer can repeat it correctly. Name systems by what they did rather than by their internal codename, give each project a shape (what was breaking, what you changed, what happened after), and keep the whole walkthrough near ninety seconds. Depth that cannot survive a paraphrase reads as vagueness.
What to demonstrate
- Whether a non-engineer can restate your projects without distorting them, since their paraphrase is what travels to the hiring manager, not your sentences
- Whether each project has a shape rather than a stack list: the failure or constraint, the change you made, the result and how it was measured
- Whether you can say what was yours inside a team project without either inflating it or disappearing into the plural
How to prepare
- Rewrite each headline project as two sentences with no internal system names and no acronyms outside your company, then say them to someone outside engineering and have them repeat them back. Fix whatever came back wrong
- Attach one measured number to each project: the baseline, the change, and the window it was measured over. Where nothing was ever measured, say that plainly rather than reaching for a plausible percentage
- Time the background walkthrough against a clock. If it runs past two minutes, compress the earliest role to a single clause and spend the recovered time on the most recent one
Technical Assessments
reportedThe same problem is scored by two different mechanisms depending on the format, and preparing for one does not cover the other. With a person watching, partial progress is visible and a hint is a correction you can absorb; silence is the expensive failure, because nobody can read a half-written function. With an automated grader there is no partial credit for what you were about to do, nobody to ask, and the worked examples in the prompt are the entire specification. Read them as a contract, down to whether an empty result should be an empty list or no output at all.
What to demonstrate
- In a live session, whether your commentary tracks what your hands are doing, and whether a hint redirects you or gets defended against
- In an automated one, whether you cover the cases the examples do not show, since the hidden cases are where the score moves
- Whether you manage the clock on purpose: abandoning an approach that is not converging while there is still time to write something simpler that finishes
How to prepare
- Have someone hand you a problem and feed you one deliberately wrong hint. Practise testing it against a concrete case instead of accepting or rejecting it on authority.
- Do one timed run a week in a plain browser editor with autocomplete, linting and your own snippets switched off, which is closer to what these environments give you
- For the automated format, write the harness before the solution: a main that feeds the worked examples plus an empty and a single-element case and prints expected against actual, so a wrong submission is caught by you first
Proficiency Evaluation
reportedMost of the time lost in this format is not lost to thinking. It goes to a standard-library call you half-remember, an off-by-one in a loop bound, and a debugging loop that mutates code at random until something passes. When output is wrong, stop re-reading the whole function: take the smallest input that reproduces it and walk the state through by hand, printing intermediates if the environment allows. Guessing at a fix without a failing case you understand is how a five-minute bug becomes twenty, and the clock does not pause while you do it.
What to demonstrate
- Whether you reach the right structure without a detour, and can write it from memory rather than only recall that one exists
- Whether overflow is considered where the language has fixed-width integers, since a signed 32-bit value stops at 2,147,483,647 and then wraps in Java, is undefined behaviour in C++, and does not arise in Python, whose integers grow instead
- Whether recursion depth is treated as a constraint on large inputs, given that CPython's default limit is 1000 frames and a deep recursion can exhaust the stack in any language where an iterative version would not
- Whether a failing case is isolated and explained before any edit is made to the code
How to prepare
- From an empty file and with no references open, implement the pieces you lean on most: a heap push and pop, an iterative DFS with an explicit stack, and a binary search whose midpoint is written lo + (hi - lo) / 2, which avoids the overflow that (lo + hi) / 2 can hit in a fixed-width integer type
- Time yourself on the ten library calls you look up most, such as sorting with a custom comparator, splitting and joining strings, and finding the next key at or above a value in an ordered map, until the lookup is gone
- Take a solution you know is broken and, before touching it, write one sentence naming the input, the expected value and the actual value. Repeat until you do it without deciding to.
Design-Oriented Interviews
reportedBecause the format is not fixed, the first job in the room is classification. Listen to the opening question and decide what it is: a probe into work you have already described, a fresh problem to solve now, or a conversation about how you operate. Each wants a different register, and the common failure is forcing a rehearsed structure onto a question that did not ask for it. Running a full design ritual on a ten-minute debugging question reads as not listening. When you cannot tell which it is, ask how long they want to spend and answer at that depth.
What to demonstrate
- Whether the shape of your answer matches the question, so a yes-or-no gets answered before it is justified and an open prompt gets a direction before a detour
- Whether you check how much depth is wanted instead of deciding for them, and whether you stop when the answer is complete rather than continuing until someone interrupts
- Whether you can be redirected in the middle of an answer without restarting it from the beginning
- Whether a question outside your experience gets an honest boundary followed by reasoning from what you do know, instead of a confident answer with nothing behind it
How to prepare
- Rehearse one project at three lengths, roughly thirty seconds, three minutes, and a full walkthrough at the depth of a design review, and practise switching between them when someone interrupts mid-telling
- Have someone ask you five questions of deliberately mixed type in one sitting without telling you the types, and score only whether you identified each one correctly before you started answering
- Draft the sentence you will use to check depth, along the lines of asking whether the short version is useful here or they want the detail, and use it in a real conversation this week so the day of the round is not its first outing
PracHub editorial advice for the preparation topics above.
Paginating a growing table with limit and offset
Two unrelated defects share the idiom. Correctness: rows inserted or deleted between page requests shift the window, so a consumer walking an export skips rows and sees others twice, which for a customer-facing sync is silent data loss rather than an error anyone notices. Cost: the database still produces and discards the skipped rows, so page N costs time proportional to N times the page size and a deep page on a large table degrades from milliseconds to seconds. Keyset pagination over a stable, unique, indexed ordering -- where (created_at, id) < ($1, $2) order by created_at desc, id desc limit $3 -- is constant-cost per page and immune to shifting, on the precondition that the cursor columns never change value for a row, which disqualifies updated_at as a cursor.
Treating a timed-out write as a failed write
A timeout says the response did not arrive, not that the work did not happen; the server may well have committed and then lost the connection. Retrying a non-idempotent create after a timeout is the standard way to end up with two of something, and those duplicates land precisely when the system is already degraded and least able to absorb them. The discipline is to treat a timeout as unknown: either the write carries an idempotency key so the retry is safe by construction, or the client re-reads authoritative state before deciding what to do, and the interface says unknown rather than showing a failure that invites a second click.
Assuming the bug is in the framework
Suspect your own code first: read the stack trace top to bottom, check which versions are actually installed rather than which ones you believe are, and reproduce in isolation before blaming a library that thousands of people run daily. When the fault really is upstream, you need that minimal reproduction to say so credibly anyway.
Abandoning working code to chase the optimal solution
Get the straightforward version correct, state its complexity, and only then optimise, keeping the working version until the faster one passes the same cases. A correct quadratic solution with a stated path to linear beats a half-written optimal one that never ran.
Choose a category, try a prompt, then open its approach, worked solution or follow-up when you need it.
What are the fundamental differences between common data structures in…
What are the fundamental differences between common data structures in terms of time complexity?
Approach
- State the target complexity and say which constraint rules the naive version out.
- Name the brute-force solution and its complexity before improving on it.
- Walk one small example through your approach before writing the whole thing.
Follow-up
- How does this change if the input no longer fits in memory?
- What is the worst case, and how likely is it on real data?
What are the primary differences between various tree structures and t…
What are the primary differences between various tree structures and their use cases?
Approach
- State the target complexity and say which constraint rules the naive version out.
- Restate the input: its shape, its size, and what is guaranteed about it.
- Walk one small example through your approach before writing the whole thing.
Follow-up
- What is the worst case, and how likely is it on real data?
- How does this change if the input no longer fits in memory?
Can you explain the different types of heaps and identify when to use …
Can you explain the different types of heaps and identify when to use one over the other?
Approach
- Choose the data structure from the access pattern, not from familiarity.
- Restate the input: its shape, its size, and what is guaranteed about it.
- Walk one small example through your approach before writing the whole thing.
Follow-up
- What is the worst case, and how likely is it on real data?
- Which test case would catch an off-by-one here?
Seal an hour under late data with bounded memory
Metering ingest reads 256 partitions at 10,000 to 40,000 events/second. Events carry occurred_at and ingested_at, and during a producer replay the gap between them is hours. Seal each UTC hour once no more than 50 parts per million of that hour's eventual quantity can still arrive, using memory that does not grow with the size of the replay. Define the watermark, the lateness parameter and how you measure it, the structure holding open hours, and the write that performs the seal. State what an idle partition does to your watermark.
Approach
- Two clocks, two jobs. Bucket by
occurred_at, because that is the hour the customer is billed for, and advance the watermark oningested_at, because that is what the fold has consumed and whatsource_max_ingested_atrecords. Conflating them is what makes late data invisible. - The global watermark is the min over partitions of each partition's committed
ingested_at, not the max: the fold is trustworthy only as far as the slowest partition. The consequence is that one idle partition pins the watermark forever and nothing seals, so an idle partition must promote its watermark to wall clock after a stated idle timeout, and that timeout becomes a correctness parameter, because a partition that is slow rather than idle gets sealed past. - Choose the lateness L from the measured distribution of
ingested_at - occurred_at, weighted by quantity rather than by event count. The target is 50 ppm of the hour's quantity, and a replay is rare in events while carrying disproportionate mass, so an event-weighted quantile picks an L that is comfortably wrong at exactly the moment it matters. - Measure that quantile in bounded memory. A Greenwald-Khanna summary gives epsilon-approximate quantiles in O((1/epsilon) log(epsilon n)) space; a t-digest costs more per merge but has relative error that tightens at the tails, which is the half of the distribution you are reading at p99.99. Keep a separate summary per tenant class, because one tenant's batch importer is not the population.
- Hold open hours in a min-heap keyed by
hour_start. When the watermark advances, pop every hour withhour_end + L < Wand seal it: O(log H_open) per advance and O(1) amortised per event to touch its bucket. Memory is open hours multiplied by distinct(tenant, workspace, sku)keys, so cap the number of simultaneously open hours and spill the oldest intousage_rollup_hourlyasstatus='open'with arevisionbump. While an hour is open the row is upsertable, so the store is your overflow. - The seal itself is a conditional write:
update ... set status='sealed', sealed_at=now() where status='open' returning .... Two sealers race on every restart, and the loser must see zero rows and stop rather than write a second value. After the seal, an event for that hour is not an upsert but an adjustment, andsource_max_ingested_atis what proves it arrived afterwards.
Worked solution 40 min
- Replay a day of events with a synthetic lateness distribution: 99.9% under two minutes, plus a 0.05% tail at four to six hours that carries 3% of total quantity.
- Compute the p99.99 lateness two ways, event-weighted and quantity-weighted, and put the two numbers side by side.
- Implement the min-heap of open hours with the watermark as the min over 256 partitions, then stall one partition for 20 minutes and observe what seals.
- Set the idle-partition timeout to 60 seconds, repeat the stall, and measure how much quantity arrives after the seal.
- Attempt the seal from two workers at once and confirm the conditional update lets exactly one through.
Follow-up
- A replay starts during the sealing window for a period you are about to close. What do you do, and what is the customer-visible consequence of each option?
- Your measured quantity-weighted p99.99 lateness is six hours and the invoice must be issued at 02:00 UTC on the first. How do you reconcile those two numbers?
- How would you detect that L has drifted before it costs you an hour's quantity?
Explain why the metering dashboard scans every daily partition
usage_event is range-partitioned daily on ingested_at and holds tenant_id, workspace_id, environment, sku, quantity numeric(20,6), occurred_at and ingested_at. The only relevant index is on (occurred_at). A dashboard runs select sku, sum(quantity) from usage_event where tenant_id = $1 and date_trunc('hour', occurred_at) >= $2 and environment = 'production' group by sku, and EXPLAIN shows a sequential scan of every partition. Give each distinct reason, rewrite the predicate so an index can serve it, propose the index, and state the write cost its column order adds.
Approach
- Separate the three causes rather than blaming one. First,
date_trunc('hour', occurred_at)wraps the column, so the predicate is not sargable against a btree on the bare column. Second, pruning keys off ingested_at while the query constrains occurred_at, so no partition can be excluded. Third, even made sargable, (occurred_at) is not tenant-leading, so for one tenant among thousands the scan reads the whole time range and discards nearly all of it. - Rewrite the bound carefully, because the obvious rewrite is only conditionally equivalent.
date_trunc('hour', x) >= $2equalsx >= $2only when $2 is already hour-aligned; for an arbitrary $2 it meansx >= date_trunc('hour', $2) + interval '1 hour'. Normalise the parameter in the caller and leave the column bare. - Restore pruning with a second, redundant predicate on the partition key:
ingested_at >= $2 - interval '<late-data horizon>'. State both sides of it. It prunes to a handful of partitions, and it silently omits any event whose ingest lagged past that horizon, which is precisely what a producer replay produces. Either document the horizon as a stated bound, or partition on occurred_at and move the problem into the dedup window instead. - Propose
(tenant_id, occurred_at) include (sku, quantity)per partition. A partial indexwhere environment = 'production'mostly saves size rather than selectivity, since production dominates the three environments; take it if non-production is a meaningful share and skip it otherwise. - Price the write path honestly. At roughly 250M rows/day each extra index is another insert plus WAL per row, and a tenant-leading key scatters inserts across one hot leaf per active tenant instead of appending to a single rightmost leaf, so page dirtying and random I/O both rise. An INCLUDE payload widens every leaf entry and enlarges the index accordingly.
- Add the index-only-scan caveat before someone reports it as a regression: on a freshly appended table the visibility map is not yet set for recent pages, so the INCLUDE columns still cost heap fetches until autovacuum has been through, and the newest hour is exactly the data the dashboard reads.
Worked solution 30 min
- Build 30 daily partitions with skewed tenants, one holding about 40% of the rows, then ANALYZE.
- Run
explain (analyze, buffers)on the original query and record how many partitions were scanned and the rows removed by filter. - Apply the rewritten predicate and the index, re-run, and confirm the plan lists only the partitions inside the ingested_at bound.
- Re-run with $2 set to a non-hour-aligned timestamp and confirm the rewritten and original predicates return identical rows.
- Insert an event with ingested_at six hours past occurred_at and check whether the pruning predicate excludes it.
Follow-up
- CREATE INDEX CONCURRENTLY is not supported on a partitioned parent. Give the sequence that gets this index onto 400 existing partitions without blocking ingest.
- One tenant holds 200 times the median row count and the dashboard still times out for them with the index in place. What changes?
- Should this read hit
usage_rollup_hourlyinstead? State what that costs in freshness and what the watermark lets you promise.
Decide which facts an invoice line copies instead of joining
invoice_line_item already denormalises tenant_id, which is reachable through invoice_id, and stores amount_minor even though quantity times unit_price_micros would recompute it. A reviewer asks you to normalise both away, and separately asks whether the tenant's legal name and billing address should be copied onto the invoice header. Decide each case. For every field you keep denormalised, name the read pattern or the invariant that justifies it, the anomaly the copy can develop, and the mechanism that prevents that anomaly here.
Approach
- Split the question into two kinds of copy, because they fail differently. A copy of a currently mutable fact is a cache: it drifts and needs invalidation. A copy of a fact frozen at write time is not a cache at all, it is the record of what happened, and normalising it away destroys information the source no longer holds.
- Keep tenant_id on the line. It costs 8 bytes, it leads every index on the table so no read is ever accidentally cross-tenant, and it turns a wrong join into an empty result rather than another tenant's money. Prevent the drift structurally: a unique constraint on invoice (invoice_id, tenant_id) plus a composite foreign key from the line on (invoice_id, tenant_id) makes a mismatched pair impossible, so the database enforces agreement instead of a code review.
- Keep amount_minor. Rounding must happen exactly once, at a named site, with a stated mode (half-even here). If readers recompute from quantity and unit_price_micros, every reader owns a rounding decision, and half-up and half-even diverge systematically across thousands of lines rather than cancelling out. A check constraint can bound the stored value but deliberately cannot re-derive it.
- Copy the legal name and billing address onto the invoice header, written once and never updated. The statement must show what was true when it was sealed, and the tenant record will change afterwards. This is a snapshot for the same reason
source_rollup_watermarkis stored per line: without it, nobody can reconstruct what the customer was told. - Name the read pattern that pays for all of it. Rendering, dispute response and export are per-tenant, per-period reads over thousands of lines that would otherwise join back to slowly changing dimensions that no longer hold the historical value. The write side is a once-per-period batch, so the extra columns cost nothing that matters.
- Concede the case where the reviewer is right: a mutable operational attribute such as the tenant's current plan name has no business on a line. If a report wants it, join. If a statement needs the plan as of the period, that is another snapshot and it belongs on the header with the rest.
Follow-up
- Write the composite foreign key and the unique constraint it requires on the parent. What does it cost on every line insert, and what does it do to a bulk load?
- A tenant is renamed after being invoiced. Which rows change, and what does the customer see on last quarter's PDF?
- Where does currency live, and what breaks if a tenant's billing currency changes between two periods?
Can you walk us through your past projects and the specific technical …
Can you walk us through your past projects and the specific technical challenges you overcame?
Approach
- State how the contract changes without breaking existing clients.
- Define the identity of a request so a retry cannot double-apply it.
- Say who the caller is and what they do when the call fails halfway.
Follow-up
- What happens if the caller retries after a timeout?
- How does a client discover it is on an old version of this contract?
Calculate profit margins and percentage-based financial scenarios.
Calculate profit margins and percentage-based financial scenarios.
Approach
- Say what you would check first and why it is the highest-information step.
- Work from the requirement backwards to the design.
- State your assumptions explicitly before working the problem.
Follow-up
- What assumption would you test first?
- How would you know your answer was wrong?
Complete logical sequence and pattern recognition exercises.
Complete logical sequence and pattern recognition exercises.
Approach
- Work from the requirement backwards to the design.
- Clarify what is being asked and what a complete answer contains.
- Say what you would check first and why it is the highest-information step.
Follow-up
- What assumption would you test first?
- How would you know your answer was wrong?
Per-tenant rate limiting that holds across one hundred pods
The same gateway enforces each tenant's plan rate limit in requests/second and its monthly quota. Traffic is heavily skewed: a handful of tenants exceed all others combined, while a small tenant's requests may all land on one of the 120 pods. Both limits must hold in aggregate rather than per pod, per credential or per region, and the check may add at most 2 ms at p99. Specify the algorithm, where the state lives, the exact operation performed per request, and the behaviour when the counter store is unreachable - separately for the rate limit and the quota.
Approach
- Do the arithmetic on per-pod buckets before discarding them, and be precise about which half fails. Giving each pod rate/N keeps the sustained aggregate correct - 120 buckets of 5 rps sum to the 600 rps limit - but a tenant whose traffic all lands on one pod is throttled at 5 rps, a hundred and twentieth of what it pays for. The over-admission comes from burst depth, not sustained rate: if each pod carries a full bucket depth B, the aggregate burst is 120B against a limit that intended to allow B.
- Move the rate limit to a shared counter accessed in exactly one atomic round trip - a token bucket or GCRA as a single server-side script returning allow/deny plus a retry-after - never a read followed by a write. Keep the key tenant-scoped and region-local; a globally shared counter costs a cross-region round trip that alone exceeds the 2 ms budget, so shard the global limit per region in proportion to observed regional share and accept that a tenant whose traffic shifts regions is briefly throttled until the shards rebalance.
- Cut round trips for the largest tenants with leased tokens: a pod leases 50 at a time and spends them locally, reducing counter round trips by 50x at the cost of bounded over-admission of pods x lease_size, which is 6,000 requests in the worst case here. Shrink the lease for tenants with small limits, where that bound would swamp the limit itself.
- Treat the quota as a different problem, not a longer window. It is a count that other in-flight requests are changing, so select-the-usage-then-insert is write skew: read-committed permits it and repeatable read permits it too, because snapshot isolation is exactly what allows two transactions to read a consistent count and both write. Enforce it inside one statement - an atomic increment whose returned value is compared, or UPDATE ... SET used = used + $1 WHERE used + $1 <= limit RETURNING - or with a constraint that makes the surplus write fail.
- Write the unavailability policy per limit rather than one policy for both. The rate limit fails open to a conservative local bucket, because it protects capacity and failing closed turns a counter blip into a total outage. The quota fails open for tenants whose last known usage was well below the cap and closed for those at or above it, since that is the only decision with revenue attached, and reconciles from the usage ledger on recovery - which is why the monthly counter must be re-seedable from that ledger rather than being the only copy.
Worked solution 30 min
- For a 600 rps limit across 120 pods, compute the sustained rate and the aggregate burst under local buckets of depth B, then the throughput of a tenant whose traffic all lands on one pod.
- Write the shared-counter operation as a single atomic script: its inputs, its return value, and the number of network round trips per request.
- Size a lease of 50 tokens: compute the worst-case over-admission as pods x lease_size and the reduction in round trips, then decide the smallest limit at which the lease is still acceptable.
- Write the two unavailability policies side by side and the reconciliation step that runs when the counter store returns.
Follow-up
- One tenant is 40% of all traffic and its counter key lands on a single shard. What do you change, and what does that cost in accuracy?
- Clients receive 429s and retry. What stops the well-behaved ones from synchronising into a herd?
- A tenant reports being throttled below its limit. Which evidence do you produce, and does your design emit it today?
One tenant's counter writes stall the whole connection pool
A change that made a per-tenant usage counter correct now produces site-wide latency whenever one large tenant writes: unrelated endpoints time out waiting for a connection while database CPU stays low and no statement is slow. The change wraps the counter update in a transaction that takes SELECT ... FOR UPDATE on one row, calls an external pricing service, then updates and commits. Give an ordered checklist, the arithmetic that bounds that tenant's write rate, and three repairs with the cost each one accepts.
Approach
- Separate waiting from working. Low database CPU alongside high application latency points at a queue, so instrument connection-acquisition wait separately from query execution time; that queue forms in the application and is invisible in database metrics, which is why the database looks healthy throughout.
- Confirm the lock rather than assuming it: sample waiting sessions and group by wait event, relation and tuple. Contention concentrated on one tuple belonging to one tenant is the signature; a deadlock would instead show the database aborting transactions after its detection timeout, which is not happening here.
- Do the arithmetic out loud. Throughput on a serialised row is one divided by the lock hold time, and the hold spans the external call, so a 20 ms pricing call caps that tenant near 50 writes per second no matter how many pods run. Every waiter also holds a pooled connection while it queues, so the shared pool drains and unrelated tenants fail at acquisition.
- Repair one: shrink the critical section to a single statement with the price resolved before the transaction opens. Cost is a stale price for the duration of one request and a second round trip; benefit is a hold time measured in the database's own execution time.
- Repairs two and three change where the contention lives rather than how long it is held. Sharding the counter into per-(tenant, bucket) rows and summing on read multiplies write throughput by the shard count, at the cost of an aggregate on every read and a shard count you must size against the largest tenant rather than the median. Accumulating in memory and flushing periodically removes the per-write round trip entirely, paid for with a bounded loss window on crash, which is acceptable for a rate limiter and not for a billing counter.
- Contain independently of which repair wins: a separate pool or per-tenant concurrency cap for this write class, a statement timeout low enough that a pathological query dies before it accumulates waiters, and an idle-in-transaction timeout so a stuck client cannot pin a connection and its locks.
Follow-up
- What would a genuine deadlock look like here, which two code paths would produce one, and how does the database's response differ from what you observed?
- If a transaction-pooling proxy sits in front of the database, which of your three repairs changes behaviour, and what stops working that would have worked on a direct connection?
- The counter also enforces a quota. Why is SELECT the count and then INSERT still wrong after you have fixed the contention?
Day one measures instead of guessing, under a fixed rubric, and the remaining hours are allocated in proportion to the gaps before any studying begins. The allocation is deliberately not renegotiated midweek, because the area that feels worst on day three is usually the one that is moving.
Prepare, practise & reflect
One practical outcome each day. Spend longer where you need it.
0 / 7 done01Diagnostic, scored before you study anything
- Sit a 110-minute diagnostic in four blocks: forty-five minutes on two coding problems, twenty-five on one design prompt taken to interface and data model, twenty of short-answer fundamentals, and twenty delivering two behavioural answers aloud.
- Score each block from 0 to 3 on a fixed rubric where 3 is correct and fluent, 2 is correct but slow or prompted, 1 is partially correct and 0 is stuck, grading the artifact rather than how the attempt felt.
- Allocate days two to five in proportion to 3 minus each block's score, write the allocation down, and commit to leaving it alone.
Deliverable: A scored rubric and a fixed hour allocation for the rest of the week.
Practice prompt ↗Practice prompt ↗Worked solution ↗02Largest gap: find the boundary rather than the subject
- Split the weakest area into named sub-skills and rate each separately. For coding those are restating the problem, choosing the structure, stating the invariant, turning the invariant into loop bounds, handling empty and single-element input, and accounting for complexity out loud.
- Attempt three items positioned just above where the rating drops off, and for each write the first move you failed to make.
- Re-attempt one of them from blank four hours later with nothing open.
Deliverable: A sub-skill map with the two blocking sub-skills circled.
Practice prompt ↗Practice prompt ↗03Drill the blocking sub-skill by repeating the shape
- Do eight short repetitions of the same shape rather than eight different problems, so what gets practised is the pattern and not the puzzle.
- State the rule you now hold in one sentence, then test it against a case built to break it, a sliding window over an array containing negative values, or a cache-aside read path whose invalidation message is dropped.
- Have someone else read your one-sentence rule and find the precondition you left out.
Deliverable: One rule statement with its preconditions attached and one counterexample that would have caught the incomplete version.
Practice prompt ↗Practice prompt ↗04Second gap, plus maintenance on the strongest area
- Run the same sub-skill decomposition on the second-largest gap in half the time.
- Spend twenty-five timed minutes on the block you scored highest, choosing the hardest item you can still finish rather than a warm-up.
- Write whether each area fails you on recall, on setup, or on execution, and set the fix accordingly: repetition for recall, a written checklist for setup, timed work for execution.
Deliverable: A second sub-skill map plus a one-line failure diagnosis for each area.
Practice prompt ↗Practice prompt ↗Worked solution ↗05The gap that is not a skill
- Record one technical and one behavioural answer, then count two things in the playback: seconds before your first clarifying question, and sentences you began without knowing where they would end.
- Practise saying that you do not know, followed by how you would find out, without letting it soften into a guess, and practise stating a complexity or an estimate before being asked for it.
- Redeliver one answer under a hard ninety-second cap, which forces structure ahead of detail.
Deliverable: Two recordings with a counted reduction in time-to-first-question.
Practice prompt ↗Practice prompt ↗06Retest under day-one conditions
- Sit the same 110-minute structure with new prompts of comparable difficulty and score it on the identical rubric.
- For any block that did not move, change the method rather than adding hours: a block stuck at 1 usually means the practice was too varied, not too short.
- Write down which single block you would still lose the offer on.
Deliverable: A second scored rubric placed beside the first, with one named remaining risk.
Practice prompt ↗Practice prompt ↗07Full loop under interview conditions
- Run a sixty-minute mock over the two blocks that moved least, with an interviewer briefed to interrupt and change direction mid-answer.
- Write the recovery script for going blank: restate the question, state your assumption, name the first thing you would check.
- Say every rule from the week aloud without reading it, and cut any you cannot state in a single sentence, since a rule you have to reconstruct mid-answer will not survive an interruption.
Deliverable: A one-page card holding the recovery script and only the rules you could state from memory.
Practice prompt ↗Practice prompt ↗Worked solution ↗Expand any day for tasks and deliverables. Your progress is saved on this device.
When the requirements were thin, the interesting part is how you fenced the problem off: the assumption you wrote down, who you got to confirm it, the narrow version you shipped first so the rest stayed cheap to change. Guessing and being right is luck. Guessing in writing, where someone could correct you, is method.
Own the incident where invoices undercounted metered usage
A metering consumer acknowledged each batch before committing the fold into usage_rollup_hourly. A rolling deploy restarted consumers mid-batch for two hours; roughly 1.4M usage_event rows were acknowledged and never folded, and 61 invoices sealed against the resulting rollups before anyone noticed. Take the owner's role. Describe an incident of comparable blast radius you owned: how it surfaced, the query that sized the loss, what you stopped first, and how the money was corrected. Give a wall-clock timeline and one thing you got wrong while it was still live.
Approach
- Open with the invariant that broke and the direction of the error, because they determine everything else: acknowledging before committing makes the consumer at-most-once, so this loses events rather than duplicating them, and loss raises no error anywhere. A listener who hears 'we lost revenue silently' knows immediately why detection took two hours.
- Size it with a stated reconciliation rather than an adjective: sum(quantity) from usage_event grouped by (tenant_id, sku, hour of occurred_at) over the window, against usage_rollup_hourly.quantity_sum on the same keys, filtered to environment='production' because staging and sandbox are metered but not billed. Then bisect by hour and tenant until single cells explain the gap. Say how long that ran and whether a replica could serve it while the incident was live.
- Separate mitigation from fix and say which came first. Mitigation is holding the sealing job, because a sealed row is frozen by design and every minute of sealing converts a recoverable rollup into an invoice correction. The fix is moving the acknowledgement after the commit, which re-introduces duplicates that the dedup check on (tenant_id, idempotency_key) must now absorb.
- State the correction path in the domain's own terms: sealed periods are never edited, so each affected tenant gets an adjustment line on the next invoice with kind='adjustment' and voided_by_line_id pointing at the line it reverses, priced against the same rate tier and carrying the watermark it priced against. That is four separate numbers — tenants affected, minor units, the cycle the adjustment lands in, and when customers were told.
- Close on one prevention control with its cost, not five: a per-hour reconciliation comparing raw sum to rollup sum that pages above a threshold. Name the threshold and the false-page rate you accepted, because a detector nobody will keep staffed is not prevention.
- Name a mistake you made inside the response window — the wrong first hypothesis, a mitigation that made it worse — rather than a design mistake from six months earlier. That is the part candidates rehearse away and interviewers weight heavily.
Follow-up
- Your fix moves the acknowledgement after the commit. What breaks now, and what absorbs it?
- One undercharged tenant has since churned. Do you bill them, and who decides?
- How would you have caught this in ten minutes instead of two hours, and what would that detector cost you in pages per week?
Reverse a webhook ordering decision after measuring its cost
You argued for strict per-subscription ordering in webhook-delivery, which means one in-flight attempt per subscription. It shipped. Three months later a single unresponsive endpoint holds one subscription's queue at a six-hour backlog, and two customers report events arriving out of order anyway once their own retries are counted. Describe a decision you reversed: what you originally optimised for, the measurement that changed your mind, what the reversal cost in engineering time and customer change, and how you told the people who had already built on the original guarantee.
Approach
- State the original decision as a trade you made knowingly. Ordering across a network requires a single in-flight attempt per subscription, and its price is head-of-line blocking whenever one endpoint is slow. 'We priced it wrong' is a much stronger opening than 'we did not realise', and it is usually the true one.
- Bring the measurement that flipped it, not the anecdote: backlog age at the ninety-ninth percentile per subscription, the share of subscriptions where one slow endpoint gated an otherwise healthy queue, and the delivery throughput lost to serialisation. A reversal justified by complaints is indistinguishable from a reversal justified by fatigue.
- Name what you learned about the guarantee itself, which is the engineering content of this story. At-least-once delivery means a retried event already arrives after newer ones and the consumer already must be idempotent, so a guarantee the customer has to defend against anyway was never worth what it cost to provide.
- Describe the migration, because reversing a published contract is the hard half and the part candidates skip. Parallel attempts behind a per-subscription flag, a monotonically increasing sequence number added to the envelope so order-sensitive consumers can sort or discard, documentation that states at-least-once and unordered in those words, and a deprecation measured in quarters because the client is a pinned SDK inside a build pipeline you cannot see or redeploy.
- Give the cost in the two currencies that matter: engineer-weeks, and how many customers had to change code. Then say who you told before it shipped rather than in a changelog afterwards, and which large customer you left on the old behaviour and for how long.
- Close with the signal you now weight differently, stated as something you would do earlier next time: measuring the blocking cost on the slowest decile of endpoints before committing to the guarantee, rather than after a customer noticed.
Follow-up
- A customer insists they need ordering. What do you offer them that is not global serialisation?
- How did you choose the deprecation window given that you cannot see or redeploy the clients?
- What would have to be true for you to reverse back?
Estimate a tenant-leading index migration you have never run
Someone needs a date. usage_event carries an index on (occurred_at) and needs (tenant_id, occurred_at); the largest tenant holds roughly a hundred times the median tenant's rows, the table is partitioned daily with years of retention, and you have never run a migration on a table this large. Give an estimate you would defend: how you decompose the work, the two or three numbers you would go and measure first, the range and confidence you state, and what you commit to when the person asking needs a single date today.
Approach
- Refuse the bare number and then give one anyway, in the form that is actually useful: a range plus the measurement that collapses it. 'Four to eleven days; one afternoon building this index on a restored copy of the largest partition takes that to within a day' is an answer, while 'it depends' is not.
- Decompose by failure mode rather than into equal chunks, because that is where estimates go wrong. On a partitioned parent you create the index ON ONLY the parent, build each partition's index with CREATE INDEX CONCURRENTLY, then ALTER INDEX ... ATTACH PARTITION, at which point the parent index becomes valid. CONCURRENTLY does not block writes but scans each partition twice, waits out older transactions, cannot run inside a transaction block, and on failure leaves an invalid index you must drop concurrently and retry.
- Name the two unknowns that dominate and price them: build time on one restored partition of realistic size, and whether the planner actually chooses the new index for the skewed tenant, since selectivity for a tenant holding most of the rows is a different question from selectivity for the median tenant. Both are half-day measurements against a replica, and both are cheaper than being wrong by a week.
- State the assumptions the range is conditional on, because that is what makes a slip a re-estimate instead of a credibility event: no partition above a stated row count, one concurrent build at a time so it does not compete with ingest for I/O, and an ingest backlog that can absorb the added write amplification while both indexes exist.
- Budget the step nobody budgets: verification and the old index's removal. Dropping the old index is fast, but deciding it is safe to drop means confirming no plan still uses it, and that confirmation waits on real traffic across a full weekly cycle rather than on your patience.
- Answer the single-date request honestly. Commit to a date for the first checkpoint — the measured build number from the replica — and to re-estimating on that date, and say plainly what you are not committing to yet. A date with a scheduled re-estimate is worth more to the asker than a confident wrong one, and you should say why in those words.
Follow-up
- The concurrent build fails half way through the largest partition. What is the state of the database and what do you do next?
- Your estimate slips by sixty percent. Which assumption broke, and at what point would you have known?
- The person asking needs the date for a customer commitment. Does your answer change?
- 01
A metering consumer acknowledged each batch before committing the fold into usage_rollup_hourly. A rolling deploy restarted consumers mid-batch for two hours; roughly 1.4M usage_event rows were acknowledged and never folded, and 61 invoices sealed against the resulting rollups before anyone noticed. Take the owner's role. Describe an incident of comparable blast radius you owned: how it surfaced, the query that sized the loss, what you stopped first, and how the money was corrected. Give a wall-clock timeline and one thing you got wrong while it was still live.
- 02
You argued for strict per-subscription ordering in webhook-delivery, which means one in-flight attempt per subscription. It shipped. Three months later a single unresponsive endpoint holds one subscription's queue at a six-hour backlog, and two customers report events arriving out of order anyway once their own retries are counted. Describe a decision you reversed: what you originally optimised for, the measurement that changed your mind, what the reversal cost in engineering time and customer change, and how you told the people who had already built on the original guarantee.
- 03
Someone needs a date. usage_event carries an index on (occurred_at) and needs (tenant_id, occurred_at); the largest tenant holds roughly a hundred times the median tenant's rows, the table is partitioned daily with years of retention, and you have never run a migration on a table this large. Give an estimate you would defend: how you decompose the work, the two or three numbers you would go and measure first, the range and confidence you state, and what you commit to when the person asking needs a single date today.
Is this an official AIEnterprise interview guide?
No. It is PracHub's own research and practice material for the Software Engineer role at AIEnterprise. Rounds and questions reflect what candidates have reported, not a process AIEnterprise has published, and they change over time. Confirm the current format and scope with your recruiter.
PracHub interview research ↗How difficult are the technical interviews?
The difficulty is generally considered average to high. The primary challenge is not just answering questions correctly, but doing so under time constraints and demonstrating a deep understanding of the underlying concepts.
PracHub interview research ↗What is the best way to prepare for the MCQ round?
Brush up on your aptitude skills, including time-distance calculations and logical reasoning, as these are common in the initial screening phase.
PracHub interview research ↗How long does the process take from start to finish?
While it can vary, you should expect a structured, multi-round process that typically spans a few weeks. Consistency and clear communication with your recruiter are key.
PracHub interview research ↗Does AIEnterprise value project experience over theory?
Both matter. You will be expected to demonstrate theoretical knowledge of data structures, but you must also be able to explain how you have applied that knowledge to real-world projects.
PracHub interview research ↗Sources & methodology 3 sources ↗
No official company page is cited. Rounds and questions come from candidate reports and PracHub editorial material; each source shows the date it was read.
- 01PracHub interview research ↗
PracHub editorial research into this company and role, maintained with this guide. Candidate-reported, not an employer publication.
PracHub page · Accessed 2026-09-22 - 02PracHub Software Engineer practice ↗
Cross-company practice questions for this role.
PracHub page · Accessed 2026-09-22 - 03PracHub interview preparation framework ↗
The framework the preparation plan follows.
PracHub page · Accessed 2026-09-22
Explore related engineering environments and compare the preparation focus.
Vercel Software Engineer Interview Guide
Debugging practice for Vercel software engineer prep built on a reproduction you trust, narrowing to the smallest failing input, and changing one variable per run so the result stays attributable.
Together Ai Software Engineer Interview Guide
Failure-handling practice for Together Ai software engineer candidates: requests whose outcome a timeout leaves unknown, where a retry is safe, and deduplicating at the receiver instead of assuming exactly-once delivery.
Scale Ai Software Engineer Interview Guide
Data structures and algorithms practice for Scale Ai candidates, where stating a bound means stating its precondition: constant-time hash lookup is an average case over keys that spread.
Notion Software Engineer Interview Guide
Data structures and algorithms practice for Notion candidates, where stating a bound means stating its precondition: constant-time hash lookup is an average case over keys that spread.