As a Software Engineer at Akeo India, you are a critical architect of the digital solutions that drive the company’s technical ecosystem. This role is not merely about writing code; it is about solving complex business problems through scalable software design, robust database management, and high-quality implementation. You will be expected to contribute to diverse projects, ranging from core backend logic to full-stack feature development.
The work at Akeo India often involves navigating both established frameworks and emerging technologies. You will work alongside experienced technical leadership, contributing to products that require high reliability and performance. Success in this role requires a blend of deep technical fundamentals and the ability to adapt to shifting project requirements. You will be evaluated on your capacity to not only execute tasks but to understand the "why" behind your technical decisions.
Initial Screening
reportedThe person on this call usually cannot evaluate your code and does not need to. They write a short paragraph, and that paragraph is what a hiring manager skims when deciding who to put on your loop. So the test is not whether your work was hard, it is whether a non-engineer can repeat it correctly. Name systems by what they did rather than by their internal codename, give each project a shape (what was breaking, what you changed, what happened after), and keep the whole walkthrough near ninety seconds. Depth that cannot survive a paraphrase reads as vagueness.
What to demonstrate
- Whether a non-engineer can restate your projects without distorting them, since their paraphrase is what travels to the hiring manager, not your sentences
- Whether each project has a shape rather than a stack list: the failure or constraint, the change you made, the result and how it was measured
- Whether you can say what was yours inside a team project without either inflating it or disappearing into the plural
How to prepare
- Rewrite each headline project as two sentences with no internal system names and no acronyms outside your company, then say them to someone outside engineering and have them repeat them back. Fix whatever came back wrong
- Attach one measured number to each project: the baseline, the change, and the window it was measured over. Where nothing was ever measured, say that plainly rather than reaching for a plausible percentage
- Time the background walkthrough against a clock. If it runs past two minutes, compress the earliest role to a single clause and spend the recovered time on the most recent one
Technical Rounds
reportedInput bounds are the part of the prompt most often skimmed, and they usually contain the answer. They tell you which complexity class is admissible, which narrows the search before you have thought about the problem itself. As a rough planning figure, a compiled language does on the order of 10^8 simple operations per second and an interpreted one roughly an order of magnitude less. So n up to about twenty admits enumerating subsets, a few thousand admits a quadratic pass, and a million admits neither: you need near-linear, or linear with a log factor. If the bounds are missing, ask for them.
What to demonstrate
- Whether the approach is justified by the stated input size rather than by whichever pattern you recognised first
- Whether you ask about the properties that change the algorithm: whether the input arrives sorted, whether duplicates occur, whether values are bounded integers, whether it all fits in memory
- Whether you can name the bottleneck in your own solution and what would remove it, even when you deliberately leave it in place
- Whether a claimed speedup is real, since memoising a recursion only helps when subproblems genuinely overlap and the state can be keyed cheaply
How to prepare
- For each algorithm you rely on, write down the largest n it handles in roughly a second, then check two of those figures by timing them in the language you will actually type in
- For two weeks, write one line naming your target complexity and the bound that justifies it before you write any code, then compare that line with what you ended up submitting
- Practise the conversion backwards: given a required O(n log n), list the mechanisms that get you there (sorting, a heap, an ordered map, divide and conquer) and choose by what the problem needs to query, not by what you used last
Discussion with Leadership
reportedYou cannot drill a format you do not know, so put the preparation into material that travels. Three pieces of your own work, each rehearsed until you can take a follow-up you did not anticipate, will carry a conversation or a code walkthrough equally well. Specificity is what separates that from filler. A number needs its definition before it means anything: a p99 is over some window and measured at some hop, and a server-side figure excludes the queueing and network time a client would see. The number you cannot qualify is the one to leave out.
What to demonstrate
- Whether your examples carry detail only someone who did the work would hold, such as what the binding constraint actually was, which alternative you rejected and why it was worse, and what you measured on each side of the change
- Whether a number survives one follow-up, meaning you can say what it was measured over and whether it moved because of your change or merely alongside it
- Whether a failure is described with the specific change that followed it, rather than a lesson stated in general terms
- Whether your part in a team effort is stated accurately, including what other people did
How to prepare
- Write a page on each of three projects covering the constraint, the option you rejected, the measurement before and after, and what went wrong. Cut any line you cannot take a follow-up on, since you are writing the parts you will be pressed on rather than a summary.
- Recover the real figures while you still have access: request volume, data size, latency with its percentile and window, team size, timeline. Note where each came from, whether a dashboard, a design document or memory, and mark the estimates so you can say which they are out loud.
- Take your weakest project story to someone who works in a different area and have them ask why four times in succession. The point where you run out of answer is the part to go and re-read before the round.
PracHub editorial advice for the preparation topics above.
Letting a slow dependency consume unbounded concurrency
The failure that takes a service down is usually not an error but a delay. A dependency answering in thirty seconds instead of fifty milliseconds holds each request's worker or connection six hundred times longer, and since required concurrency is arrival rate times latency, a fleet sized for sixty in-flight requests now needs thirty-six thousand to sustain the same rate - so it queues, and requests whose clients have already abandoned them still occupy resources. Retries make it precisely worse: a policy of three attempts triples the load on a dependency at the exact moment it is least able to serve, which is how one slow dependency becomes an outage of everything sharing that pool. Containment is four specific things - a timeout on every outbound call shorter than the caller's remaining budget, a bounded pool per dependency so one cannot starve the others, backoff with full jitter rather than a fixed delay so retries do not resynchronise, and a circuit that stops sending once the failure rate makes an attempt pointless.
Paginating with LIMIT/OFFSET over a set that changes while the client is reading it
OFFSET n makes the database produce and discard n rows before returning anything, so the cost of a page grows with its depth rather than with its size and page 500 costs five hundred pages of work. The correctness problem is worse than the cost: if a row is inserted or reordered between two page fetches, rows shift across the offset boundary and are either skipped entirely or returned twice, and neither outcome leaves any trace in the response for the client to detect. Keyset pagination - WHERE (sort_key, id) < ($last_sort_key, $last_id) ORDER BY sort_key DESC, id DESC LIMIT n, backed by an index in exactly that order - reads only the rows it returns and is stable against concurrent inserts. It requires the tie-break column: a timestamp is not unique, and duplicate sort keys straddling a page boundary reintroduce the skip it was adopted to remove.
Retrying a write that is not safe to repeat
A timeout tells you nothing about whether the server applied the write, so a blind retry of a create or a charge can duplicate it. Either make the operation idempotent, with a caller-supplied key the server deduplicates on or a conditional update, or do not retry it; and use exponential backoff with jitter so the retries of many clients do not synchronise into a second outage.
Assuming fixed-width integer arithmetic cannot overflow
In languages with fixed-width integers, including C, C++, Java, Go and Rust, computing a midpoint as (lo + hi) / 2 overflows once the sum passes the type's maximum, so write lo + (hi - lo) / 2 instead. Say which language you are in: arbitrary-precision integers, as in Python or Ruby, remove this specific hazard and none of the others.
Choose a category, try a prompt, then open its approach, worked solution or follow-up when you need it.
Create a pattern for a vertical rhombus-shaped star.
Create a pattern for a vertical rhombus-shaped star.
Approach
- State the target complexity and say which constraint rules the naive version out.
- Choose the data structure from the access pattern, not from familiarity.
- Name the brute-force solution and its complexity before improving on it.
Follow-up
- Which test case would catch an off-by-one here?
- What is the worst case, and how likely is it on real data?
Write a program to find the missing number in an array.
Write a program to find the missing number in an array.
Approach
- Choose the data structure from the access pattern, not from familiarity.
- Name the brute-force solution and its complexity before improving on it.
- Restate the input: its shape, its size, and what is guaranteed about it.
Follow-up
- Which test case would catch an off-by-one here?
- What is the worst case, and how likely is it on real data?
Discuss how you have handled the biggest difficulty in your past proje…
Discuss how you have handled the biggest difficulty in your past projects.
Approach
- Walk one small example through your approach before writing the whole thing.
- State the target complexity and say which constraint rules the naive version out.
- Choose the data structure from the access pattern, not from familiarity.
Follow-up
- How does this change if the input no longer fits in memory?
- Which test case would catch an off-by-one here?
Solve the Anagrams in a string problem.
Solve the Anagrams in a string problem.
Approach
- Restate the input: its shape, its size, and what is guaranteed about it.
- State the target complexity and say which constraint rules the naive version out.
- Choose the data structure from the access pattern, not from familiarity.
Follow-up
- What is the worst case, and how likely is it on real data?
- How does this change if the input no longer fits in memory?
Merge partitioned event streams into one ordered feed with bounded lateness
The read-model service consumes 64 log partitions carrying about 4,000 events per second in total. Each partition is ordered within itself, but partitions drift by up to 30 seconds, and the activity feed must present a tenant's events in occurred_at order. Produce the merge. State its complexity, the buffer it requires in events and in bytes, what happens when one partition is idle, and what you do with an event that arrives after you have already emitted its position. Payloads average 1 KB.
Approach
- Merge with a min-heap over the 64 partition heads keyed on (occurred_at, event_id): O(log P) per event and O(n log P) overall. The tie-break on event_id is what makes the output deterministic when two partitions carry the same millisecond, which matters because the feed is paginated and a non-deterministic order reorders pages under the reader.
- Emitting the heap head is only correct once every partition has produced everything up to that timestamp, so the emit condition is a watermark: the minimum across partitions of the highest occurred_at seen, less the allowed lateness. Events are held until the watermark passes them, which is what turns individually ordered streams into a jointly ordered one.
- Size the buffer from the lateness rather than guessing: 4,000 events per second times 30 seconds is 120,000 buffered events, and at 1 KB each about 120 MB of heap. That number is the real price of the ordering guarantee and belongs in front of whoever asked for it.
- Handle the idle partition explicitly, because it fails the feed rather than corrupting it: a partition with no traffic never advances its own maximum, so the watermark freezes and output stops entirely. Either every partition emits a periodic idle marker carrying the broker's current time, or the watermark falls back to wall clock for a partition silent beyond a threshold.
- Choose the late-event policy from what the projection is keyed on. The projection upserts on (aggregate_id, aggregate_version) and discards a version it has already applied, so a late event is safe to apply out of order and correctness never depended on the merge at all. Apply it, recompute the affected feed page, and count lateness so the 30-second budget can be re-derived from data rather than folklore.
- Say what the merge does not buy: ordering is guaranteed within one aggregate by the log's partitioning, and no watermark makes the cross-aggregate order authoritative. Two events from different aggregates in the same millisecond have no true order, so the feed's order is a presentation choice that must be stable rather than correct.
Worked solution 35 min
- Write the heap comparator on (occurred_at, event_id) and the per-partition head refill.
- Write the watermark computation and the emit-loop condition, then list which buffered events are held at a chosen instant.
- Compute the buffer at 4,000 events per second, 30 seconds and 1 KB per event, and state what fraction of a worker's heap that represents.
- Add the idle-partition marker and trace the watermark with one silent partition, both with and without the marker.
- Write the late-event path and name the key that makes applying it safe.
Follow-up
- The lateness budget is raised to five minutes. What is the new buffer, and what besides memory changes?
- The consumer restarts. Where does it resume from, and what does the feed look like for the first 30 seconds?
- One partition is ten minutes behind because its producer is slow. Do you stall the feed or emit without it?
Hold a per-tenant active cap against concurrent creates
A tenant on the standard plan may hold at most 50 resources with status='active'. The create handler runs SELECT count(*) FROM resource WHERE tenant_id = $1 AND status = 'active', compares to 50, then inserts. Two creates arrive 3 ms apart on different instances and the tenant lands at 51. Name the anomaly, say whether PostgreSQL 16 READ COMMITTED or REPEATABLE READ prevents it and why, then give an implementation that holds the cap at READ COMMITTED with the exact statements. Finally, say what changes when the cap is 'at most one running export per tenant' on job_run.
Approach
- Name it: write skew. The two transactions read an overlapping set and write disjoint rows, so there is no row-level conflict for the engine to detect and each commit is individually legal.
- Rule out the levels precisely. READ COMMITTED takes a fresh snapshot per statement and takes no lock on the counted rows, so both see 49. PostgreSQL's REPEATABLE READ is snapshot isolation: it removes non-repeatable reads and phantoms within the snapshot but still admits write skew, because the anomaly is not a re-read of a changed row, it is a read of a set that a concurrent transaction invalidates. Only SERIALIZABLE closes it, by tracking the read dependency and aborting one transaction with SQLSTATE 40001 — a guarantee that exists only if the application re-runs the whole transaction from the read.
- Convert the set predicate into a single-row conflict: keep tenant.active_resource_count and run UPDATE tenant SET active_resource_count = active_resource_count + 1 WHERE tenant_id = $1 AND active_resource_count < 50 in the same transaction as the INSERT. Zero affected rows is the cap, returned as 409. The row lock serialises the decision at any isolation level, and contention is bounded to one tenant's row — which is also the fair-scheduling unit, unlike a global counter that would convoy every tenant behind one row.
- State the cost you just took on: a counter is a second source of truth that can drift, so every path that changes status must adjust it inside the same transaction, and a periodic reconciliation has to exist, with resource_revision as the authority for what the count should have been.
- For the job case the invariant is expressible per row, so let the database hold it: a partial unique index on job_run (tenant_id, job_type) WHERE status IN ('queued','running') makes a second running export unwritable and the loser takes 23505, mapped to 409. That is strictly better than a counter — no drift, no reconciliation — and it is available only because the cap is one rather than fifty.
- Add the retry discipline each route demands: under SERIALIZABLE both 40001 and deadlock 40P01 are retryable and the retry must re-execute the read, while under READ COMMITTED with the counter nothing retries, because the conflict is reported to the caller rather than raised as an error.
Worked solution 35 min
- Reproduce with two sessions that both count 49, both insert and both commit, at READ COMMITTED and then at REPEATABLE READ; record the final active count for each.
- Repeat both sessions at SERIALIZABLE and record which SQLSTATE the loser receives and at which statement it is raised.
- Implement the counter form and run a 20-way concurrent create against a tenant sitting at 45 active resources.
- Implement the partial unique index for the job case and race 20 enqueues of the same export.
Follow-up
- A resource moves from archived back to active. Which statements change, and what breaks if the counter update and the status change land in different transactions?
- The cap becomes plan-dependent and a plan can change mid-month. Where does the number 50 live, and who reads it?
- How do you detect after the fact that the counter drifted, without locking the table?
Replace offset paging on the resource feed with keyset
resource holds resource_id, tenant_id, owner_user_id, title, body_ref, version, status ('draft','active','archived','deleted'), created_at, updated_at, deleted_at, with an index on (tenant_id, status, updated_at DESC, resource_id DESC). The listing endpoint returns active resources for one tenant, newest update first, 50 per page, today with LIMIT 50 OFFSET n. Tenants reach page 400 and rows are created while they read. Write the keyset query, define what the cursor carries and how it is encoded, and say which part of the index each predicate uses. Assume PostgreSQL 16.
Approach
- Name the two failures separately. OFFSET 20000 makes the server produce and discard 20,000 rows, so page cost grows with depth rather than with page size. Independently, any write that changes how many rows sort above the offset moves the window between two fetches, and the direction decides which anomaly you get: an insert lands at the head of updated_at DESC and pushes already-returned rows down past the boundary, so they are returned a second time; a delete above the offset, or a row whose updated_at is bumped above the cursor, pulls rows up and one is never returned at all. Nothing in the response reveals either.
- Write the seek: WHERE tenant_id = $1 AND status = 'active' AND (updated_at, resource_id) < ($2, $3) ORDER BY updated_at DESC, resource_id DESC LIMIT 50. The row-value comparison is one index range rather than a disjunction, and both columns are NOT NULL, which is what makes that comparison well defined.
- Map each predicate onto the index: tenant_id and status are equality on the leading columns, (updated_at, resource_id) is the range, and the ORDER BY matches the index order so no Sort node appears and the scan stops after 50 rows. The DESC in the definition only matters for mixed directions — a plain ascending btree on the same columns is read backwards for this query.
- Put both sort columns in the cursor and nothing the client can tamper with into another tenant: base64 of (updated_at, resource_id), validated server-side, with tenant_id taken from the principal.
- State the residual honestly. Keyset is stable against concurrent inserts and deletes, but not against a row whose updated_at changes mid-scroll — that row moves in the ordering and can be seen twice. If the feed must be a snapshot, order by an immutable key or bound the page set with updated_at <= the cursor's start value.
- Keep a total out of the page path. A tenant-wide COUNT(*) is the scan keyset just removed; fetch LIMIT 51 and return has_more instead.
Follow-up
- The client asks for 'jump to page 400'. What do you offer instead, and what does the honest version cost?
- Sort order becomes user-selectable across four columns. How many indexes is that, and which would you refuse to add?
- What does the cursor do when the row it points at has since been deleted?
Describe function overloading vs. function overriding with code exampl…
Describe function overloading vs. function overriding with code examples.
Approach
- Say what you would check first and why it is the highest-information step.
- Work from the requirement backwards to the design.
- Clarify what is being asked and what a complete answer contains.
Follow-up
- What assumption would you test first?
- How would you know your answer was wrong?
Explain OOPs concepts using real-world examples.
Explain OOPs concepts using real-world examples.
Approach
- Say what you would check first and why it is the highest-information step.
- Clarify what is being asked and what a complete answer contains.
- Work from the requirement backwards to the design.
Follow-up
- What assumption would you test first?
- How would you know your answer was wrong?
Relay committed events to the log without gaps or reordering
outbox_event rows are written in the same transaction as the state change and carry aggregate_type, aggregate_id, aggregate_version, payload and status, with a partial index on (created_at, event_id) WHERE status = 'pending'. The relay publishes about 4k events/second to a partitioned append-only log keyed by aggregate_id, with one leader per partition range holding a lease. Consumers must never miss an event; they may see one twice. Design the claim-publish-mark loop, and state exactly what consumers observe when a leader's lease expires while it is mid-batch.
Approach
- Claim with SELECT ... WHERE status='pending' ORDER BY created_at, event_id LIMIT $batch FOR UPDATE SKIP LOCKED inside a transaction. SKIP LOCKED lets several relay workers share a range without serialising on each other's rows, and the partial index keeps the claim proportional to the backlog rather than to a table that is overwhelmingly published rows. At 4k/second a batch of 500 is eight claims per second, each an index scan of 500 entries.
- Publish before marking, never the reverse, and say why it is a choice. Marking first loses the event outright if the process dies in the gap, and the loss is silent - nothing remains to retry, and it surfaces later as a projection missing a row. Publishing first can repeat the event, and repetition is what every consumer is already built to survive. That single ordering is the whole at-least-once guarantee.
- Preserve the only ordering on offer. Partition by aggregate_id and never publish two events for one aggregate concurrently: claim in (created_at, event_id) order and publish sequentially within an aggregate, or hash aggregate_id to a worker slot. Order across aggregates is not available at any price here, which is why the event carries aggregate_version and the full fact rather than a delta - a consumer can then discard what it has already applied without coordinating with anyone.
- State the failover behaviour precisely, because it is the consistency-versus-availability decision in this design. A lease expires because the holder is slow, and no mechanism distinguishes that from dead, so for the length of the lease window two leaders can publish the same claimed batch. The system accepts duplicates to avoid stalling publication for every aggregate in the range whenever one worker pauses. Consumers deduplicate on (aggregate_id, aggregate_version) and drop anything at or below what they have applied.
- Bound the failure paths and pick the right alarm. A row that fails to publish increments attempts, records last_error, and moves to 'dead' after a limit so one poison payload cannot block the backlog behind it. Alert on the age of the oldest pending row, not on the relay's error rate: the failure worth catching is a relay reporting itself healthy while nothing is being published.
Worked solution 25 min
- Write the claim statement and check it against the partial index: which columns it seeks on, how many entries it touches, and what two concurrent workers do to each other.
- Write both orderings of publish and mark, and for each state what exists after a crash at every point in the loop.
- Write the consumer's dedupe rule on (aggregate_id, aggregate_version) and test it against a replayed batch of 500.
- Compute the backlog after a 40-minute outage and the batch rate needed to drain it while 4k/second continues to arrive.
Follow-up
- The relay is down 40 minutes and 9.6 million rows are pending. What does catch-up do to the primary, and what changes in the claim loop to survive it?
- A consumer insists it never received an event. Which single query settles whether the relay lost it, and what does each answer look like?
- Delivery is at-least-once. What would exactly-once require end to end, and why is that a property of the consumer rather than of the relay?
Read latency spikes on a sixty-second sawtooth
The cached listing read path serves about 14k reads/second at an 85% hit rate. p99 sits at 35 ms for 57 seconds, jumps to 900 ms for 3, and repeats. During each spike the primary shows several hundred identical listing queries starting within the same millisecond, all carrying one large tenant's id. Cache entries use a 60-second TTL. Give the mechanism, the ordered checks, the fix, and the correctness hazard your fix must not introduce.
Approach
- Match the period to a configured number before theorising about load. A spike every 60 seconds against a 60-second TTL is an entry expiring, and you confirm it by correlating spike timestamps with the entry's write time rather than with the traffic curve. If the period had matched a cron or a GC interval instead, this is a different investigation.
- Establish the concurrency of the miss. Several hundred identical queries in one millisecond means the miss path has no coalescing: every request that arrives between expiry and repopulation recomputes. The herd size is that key's arrival rate times its recompute time, so at 1.2k reads/second for the hot key and a 250 ms recompute you expect about 300 concurrent misses, which matches what is observed.
- Add single-flight on the miss path so one caller per key recomputes under a short-lived lock while the rest wait for its result. Prefer stale-while-revalidate where the read tolerates it: return the expired value immediately and refresh asynchronously, which removes the latency spike rather than serialising it into a queue of waiters.
- De-synchronise the keys. Write TTLs with jitter, for example 60 seconds plus or minus 10%, so a deploy or a mass invalidation does not align every key on the same second and turn a per-key herd into a fleet-wide one.
- Name the hazard the fix must not introduce. Serving a stale listing is acceptable only because the API reports the projection watermark, and a reader that loaded the old value before a write can repopulate the entry after the invalidation, so the bounded TTL is what actually caps staleness rather than the delete. Keep read-after-write pinned to the primary for the writing session regardless.
- Verify on miss concurrency, not hit rate. The hit rate barely moves, because the herd is one miss multiplied; the number that must change is distinct origin queries per key per minute.
Follow-up
- The same sawtooth appears on a key that is invalidated on write rather than expired. Is that the same bug?
- How does your answer change if the recompute takes 4 seconds instead of 250 ms?
- What exactly does a client see during a stale-while-revalidate window, and how does the watermark let them tell?
Roughly ninety minutes on weeknights with one longer weekend block. The plan cuts scope rather than compressing everything, on the assumption that one thing finished per night beats four half-started.
Prepare, practise & reflect
One practical outcome each day. Spend longer where you need it.
0 / 7 done01Fix the scope and take a cold baseline
- Read the role description and write the three things the loop will almost certainly test, then write an explicit not-doing list and keep it visible all week.
- Take one twenty-five-minute coding problem and one fifteen-minute design prompt cold, and write the single sentence naming what blocked each, because those two sentences decide where the remaining evenings go.
- Set the week's rule: one thing finished every night, including the night you only have forty minutes.
Deliverable: A one-page scope with a not-doing list and two cold attempts, each carrying one sentence on what blocked it.
Practice prompt ↗Practice prompt ↗Worked solution ↗02One pattern, written three times from blank
- Choose the single pattern most likely to appear in your loop and write it three times from an empty file rather than editing the previous attempt.
- On the third pass, write the invariant as a comment before the loop body and the complexity before the first line of code.
- Stop at ninety minutes even if the third version is imperfect, and write the one thing you would fix given another hour.
Deliverable: Three independent implementations of the same pattern plus a note on what changed between them.
Practice prompt ↗Practice prompt ↗03One design, only to the depth you can defend
- Take one system shape and go only as far as requirements, interface and data model, refusing to draw a box you could not survive a follow-up about.
- Attach one number to each non-functional requirement, deriving it rather than asserting it, and write the assumption the number rests on.
- Write the one tradeoff you are choosing against and the observation that would make you reverse it.
Deliverable: One design at interface-and-schema depth with derived numbers and one written reversible tradeoff.
Practice prompt ↗Practice prompt ↗04Only the fundamentals you will have to defend
- Write, in under two hundred words each, the answers to the two questions that follow almost any implementation: why this structure and not the obvious alternative, and what happens to this code at a hundred times the input.
- Write what an index actually costs: faster lookups on the indexed columns against a write that now maintains a second structure, plus the cases where the planner declines to use it anyway, low selectivity, or a predicate wrapping the column in a function.
- Delete any answer you cannot deliver aloud in under a minute, since an answer that needs reading is not an answer you have.
Deliverable: Three written answers, each under two hundred words and each timed aloud.
Practice prompt ↗Practice prompt ↗Worked solution ↗05Your own work, timed
- Write a ninety-second and a four-minute version of your main project and time both aloud rather than reading them.
- Prepare the two follow-ups that always come: what you would do differently, and how you knew it worked.
- Put one number in the first sentence and be ready to say exactly where it came from and what it excludes.
Deliverable: Two timed narratives with one defensible number in the opening line.
Practice prompt ↗Practice prompt ↗06The one full rehearsal, in the weekend block
- Run a sixty-minute mock covering a coding round and a design round in one sitting with no break, because sustained attention is the thing evenings have not trained.
- Immediately afterwards, and before hearing any feedback, write the three moments you lost the thread.
- Spend the rest of the block only on those three moments, and on nothing you merely feel shaky about.
Deliverable: Mock notes naming three failure moments with a specific fix written under each.
Practice prompt ↗Practice prompt ↗07Taper
- Write the twenty-minute warm-up you will actually do on the morning: one problem you can already solve from a blank file, one design you can narrate, and nothing you have never seen.
- Re-read only your own notes from this week and open no new material.
- Write the logistics down: the editor or shared document you will be working in, whether execution and lookups are permitted, and the sentence you will use when you do not know something.
Deliverable: A one-page card holding the design structure, the project numbers, and the logistics.
Practice prompt ↗Practice prompt ↗Worked solution ↗Expand any day for tasks and deliverables. Your progress is saved on this device.
Bring the two or three numbers the story rests on and know how they were collected. A p99 whose timer starts inside your handler excludes the time a request spent queued, so it can sit flat while users wait longer. Give the window, the percentile and what the measurement left out, or drop the number.
Tell callers you do not own that their integration breaks
A field in a write endpoint's response must change shape. You own the endpoint; you do not own the four internal callers or the outbound webhook consumers who read it. Describe a deprecation you were responsible for: what you shipped first, how you established who was actually reading the field, the window you gave and what set its length, what you did about the consumer who never moved, and how you decided removal was safe. Name the signal you used, not the announcement you sent.
Approach
- Establish the reader set empirically rather than from a wiki of owners: per-field usage counters keyed by principal, or access logs attributed to a consumer. State the blind spot of whichever you pick, since a consumer that reads the field only on a monthly job will not appear in a week of logs.
- Ship additive first. Populate the new field alongside the old one so no reader is forced to move, which is also what keeps a rolling deploy safe, because old and new instances answer the same requests at the same time and a rollback must still find the old shape present.
- Set the window from the slowest legitimate consumer's release cadence, not from your calendar, and decide separately what to do for a consumer with no release process at all, such as an external webhook endpoint you can only email.
- Convert silence into evidence before you rely on it: a short, low-traffic removal window that makes a still-dependent consumer fail visibly and loudly while you are watching, rather than at three in the morning after you have moved on.
- State the removal criterion as a measurement with a duration attached, such as observed reads at zero across a full billing cycle, and keep the change reversible for one release after removal.
Follow-up
- How would you detect a consumer that reads the field only during a monthly export?
- One caller refuses to move and has a commercial relationship behind it. What changes in your plan and what does not?
- After removal, what makes the change irreversible, and how long before you cross that line?
Reverse your own decision and price the reversal
Describe a technical decision you made and later reversed. Pick one that cost something: a service you split and merged back, a cache you added and removed, an index you created that pushed the planner onto a worse plan, a projection you rebuilt from scratch. State what you believed when you decided, the measurement that changed your mind, how long the wrong version ran in production, and what the reversal cost in migrations, dual writes, and a deprecation window for callers you did not own.
Approach
- State the original rationale without irony, in the version you would still defend given what was known then. If it is not defensible, the story is about carelessness rather than judgement, and a different example serves you better.
- Give the measurement that moved with a before and after: the p99 that did not improve, the cache hit rate that sat at 40%, the plan that flipped to a sequential scan once the table passed a size you can name.
- Cost the reversal in steps, not adjectives: expand-and-contract deploys, the dual-write window, the callers who had to be notified, the rows already written in the wrong shape that had to be backfilled or abandoned.
- Distinguish reversal from rewrite by naming what you kept. Most good reversals preserve the schema or the interface and undo one decision inside it, which is also why they were affordable.
- Finish on the process change: the smallest experiment that would have produced the same measurement in a day, and why you did not run it the first time.
Follow-up
- What in that decision was irreversible, and did you know it was irreversible when you made it?
- How did you tell the people who had already built on top of the original decision?
- What do you now measure before committing to a change of this size?
Turn a code review disagreement into a decision
A colleague's change updates a row with UPDATE resource SET version = version + 1 WHERE resource_id = $1 AND version = $2 and treats an affected-row count of zero as a successful no-op. You read that as a silently lost update; they think returning 200 is friendlier to clients than returning a conflict. Describe how you have handled a review disagreement of this shape: what goes in the comment, when you leave the thread, and who decides. Then write the comment you would leave here, in under 80 words.
Approach
- Sort the disagreement before writing anything. A silently discarded write is a correctness claim about data; the choice between 409 and 412 is taste. Only the first justifies blocking a merge, and saying which one you are doing is most of the value of the comment.
- Make the claim reproducible in the comment itself with an interleaving rather than a principle: A reads version 7, B reads version 7, B commits version 8, A's predicate matches zero rows, A is told it succeeded and A's edit is gone.
- Offer the alternative with its cost attached: return 409 carrying the current version and the revision that won, so the client can re-read and re-apply. Note that automatic retry is not the fix, because a retry re-reads the winner's state and reapplies an intent formed against data that no longer exists.
- Apply an escalation rule you can state: two round trips on the thread, then a call, and the service's owner decides rather than the reviewer. A reviewer who cannot be overruled is a bottleneck with extra steps.
- Close in writing wherever the decision lands, so the next reader finds the reasoning in the code or the ticket instead of in a collapsed review thread.
Follow-up
- Where would you put the test that fails if someone reintroduces the swallowed zero rowcount?
- The author says clients cannot handle a 409. How do you check whether that is true?
- How do you handle the same review comment when the author is more senior than you and in a hurry?
- 01
A field in a write endpoint's response must change shape. You own the endpoint; you do not own the four internal callers or the outbound webhook consumers who read it. Describe a deprecation you were responsible for: what you shipped first, how you established who was actually reading the field, the window you gave and what set its length, what you did about the consumer who never moved, and how you decided removal was safe. Name the signal you used, not the announcement you sent.
- 02
Describe a technical decision you made and later reversed. Pick one that cost something: a service you split and merged back, a cache you added and removed, an index you created that pushed the planner onto a worse plan, a projection you rebuilt from scratch. State what you believed when you decided, the measurement that changed your mind, how long the wrong version ran in production, and what the reversal cost in migrations, dual writes, and a deprecation window for callers you did not own.
- 03
A colleague's change updates a row with UPDATE resource SET version = version + 1 WHERE resource_id = $1 AND version = $2 and treats an affected-row count of zero as a successful no-op. You read that as a silently lost update; they think returning 200 is friendlier to clients than returning a conflict. Describe how you have handled a review disagreement of this shape: what goes in the comment, when you leave the thread, and who decides. Then write the comment you would leave here, in under 80 words.
Is this an official Akeo India interview guide?
No. It is PracHub's own research and practice material for the Software Engineer role at Akeo India. Rounds and questions reflect what candidates have reported, not a process Akeo India has published, and they change over time. Confirm the current format and scope with your recruiter.
PracHub interview research ↗How difficult are the technical rounds?
The difficulty varies based on the interviewer, but you should expect "difficult" to "average" levels of rigor. Focus on mastering the basics—if your fundamentals are strong, you will be well-equipped to handle the more complex questions.
PracHub interview research ↗What is the best way to prepare for the behavioral aspects?
Use the STAR method (Situation, Task, Action, Result) to frame your answers regarding past projects and challenges. Focus on how you overcame technical obstacles and contributed to team success.
PracHub interview research ↗How long does the hiring process usually take?
While it can vary, it typically involves a screening round followed by technical assessments. Stay engaged with your recruiter and ensure you are prepared for each step in the timeline.
PracHub interview research ↗Is it common to be asked about technologies I haven't worked with?
It is possible, especially if the team is looking for a quick learner. If this happens, explain your understanding of the core concepts and draw parallels to technologies you *do* know.
PracHub interview research ↗Sources & methodology 3 sources ↗
No official company page is cited. Rounds and questions come from candidate reports and PracHub editorial material; each source shows the date it was read.
- 01PracHub interview research ↗
PracHub editorial research into this company and role, maintained with this guide. Candidate-reported, not an employer publication.
PracHub page · Accessed 2026-09-22 - 02PracHub Software Engineer practice ↗
Cross-company practice questions for this role.
PracHub page · Accessed 2026-09-22 - 03PracHub interview preparation framework ↗
The framework the preparation plan follows.
PracHub page · Accessed 2026-09-22
Explore related engineering environments and compare the preparation focus.
SIG (Susquehanna) Software Engineer Interview Questions & Guide 2026
Database practice for SIG (Susquehanna) candidates: how an index changes a query plan, and which anomalies survive a given isolation level, since read committed still permits non-repeatable reads.
Roku Software Engineer Interview Guide
Prepare for Roku software interviews with tested ring-buffer and LRU models, invariants, role-specific fundamentals and clear concurrency follow-ups.
May Mobility Software Engineer Interview Questions & Guide 2026
What May Mobility asks Software Engineer candidates, from reported rounds and questions.
Leonardo Software Engineer Interview Questions & Guide 2026
What Leonardo asks Software Engineer candidates, from reported rounds and questions.