A Software Engineer at Altizon Systems plays a pivotal role in shaping the future of the Industrial Internet of Things (IIoT). You will be tasked with building scalable, high-performance solutions that bridge the gap between physical industrial assets and digital intelligence. The work is complex, requiring you to handle large-scale data ingestion, real-time analytics, and system architecture to provide actionable insights for Altizon Systems' clients.
This position is critical because your code directly influences how industries optimize their operations and efficiency. You will collaborate with cross-functional teams to solve real-world problems, ranging from algorithmic challenges in machine learning to the design of resilient distributed systems. If you thrive in environments where technical rigor meets tangible industrial impact, this role offers a unique opportunity to influence a platform that is driving digital transformation at scale.
Preparation focus
editorialNo round sequence has been reported for this company, so work the categories below and confirm the format with your recruiter.
What to demonstrate
- Breadth across SQL, experimentation and product reasoning
- Ability to state assumptions before choosing a method
How to prepare
- Drill the practice exercises below and time yourself
- Prepare three quantified stories about decisions you drove
PracHub editorial advice for the preparation topics above.
Checking a quota with a select and then writing
Under read-committed isolation, two concurrent transactions both observe a count below the limit and both insert, so the limit is exceeded by exactly the concurrency. Repeatable read does not rescue it either: it provides a stable snapshot, and this is write skew, which snapshot isolation permits by design. The options are serialisable isolation, which detects the conflict and aborts one transaction with a serialisation failure and therefore obliges the caller to retry; a single statement with the predicate inside the write; or a constraint that makes the surplus insert fail outright. The reason this pattern survives review is that it is correct in every test that runs one request at a time.
Holding money in a floating-point type, or rounding it more than once
Binary floating point cannot represent 0.01 or 0.1 exactly, so sums drift and two code paths that should agree disagree by cents nobody can trace back. The fix is integer minor units or an exact decimal type end to end, with sub-cent rates expressed as scaled integers such as micro-units, because a per-request price genuinely is smaller than a cent. The second half of the trap is rounding position: rounding each line and then summing gives a different total from summing and rounding once, and half-up and half-even diverge systematically across many lines, so rounding must happen at one named place and every downstream reader must carry the rounded value rather than recompute it from quantity and rate.
Quoting amortised or average cost as if it were a worst-case guarantee
Appending to a dynamic array is amortised O(1), but the append that triggers a resize copies every element, and hash lookup is constant only while the hash spreads the actual keys. Say which guarantee you are offering when the caller cares about the latency of one call rather than the total over many.
Assuming fixed-width integer arithmetic cannot overflow
In languages with fixed-width integers, including C, C++, Java, Go and Rust, computing a midpoint as (lo + hi) / 2 overflows once the sum passes the type's maximum, so write lo + (hi - lo) / 2 instead. Say which language you are in: arbitrary-precision integers, as in Python or Ruby, remove this specific hazard and none of the others.
Choose a category, try a prompt, then open its approach, worked solution or follow-up when you need it.
Locate a billing reconciliation gap without rescanning ninety million events
A tenant's sealed invoice total is 0.4% below the sum of its raw usage_event rows for the period. That tenant has 90 million events over 30 days in a table partitioned daily on ingested_at, and its rollups carry source_max_ingested_at, revision and sealed_at. Recomputing all 30 days from raw is correct, and you are not going to do it. Give the procedure that locates the divergent (workspace, sku, hour) cell, the cost of each probe, and the one query you run before any of it.
Approach
- Run the free query first. Sum raw quantity for the period restricted to
ingested_at <= source_max_ingested_atof the sealed rollups, and compare that against the unrestricted sum. The rollup stores the watermark precisely so this can be answered without a scan. If the whole 0.4% sits above the watermark, nothing is broken: it is late data, it becomes an adjustment line, and the investigation ends in one query. - Only if the gap survives that test do you bisect, and you bisect by dimension rather than by rows. Compare 30 per-day totals, then inside the offending day compare the 6 SKUs, then the workspaces, then the 24 hours. That is roughly 30 + 6 + W + 24 grouped probes, each an indexed range scan over one daily partition for one tenant, against O(N) per attempt for the naive re-fold.
- Quantify why naive is not merely slow but unusable mid-incident: at a generous 200,000 rows/second sequential, 90 million rows is about 7.5 minutes per attempt, you will want ten attempts, and every one competes for I/O on the same partitions live ingest is writing. The diagnostic worsens the backlog it is diagnosing.
- Before fetching each comparison, state what it would look like under each hypothesis. Two adjacent hours off by equal and opposite amounts is
occurred_atversusingested_atbucketing. A whole day offset by exactly N hours is a timezone applied at the wrong layer. A gap confined to one SKU in one workspace is an environment filter. The same(tenant_id, idempotency_key)present in twoingested_daypartitions is the dedup horizon losing a retry that crossed midnight. - Make the next bisection cheap by storing the aggregate you keep recomputing. A per-
(tenant_id, ingested_day)count and quantity checksum turns step two from thirty probes into one read, and it is the same number the reconciliation job already produces. - Whatever you find, the sealed period does not change value. The correction is an adjustment line pointing at the line it reverses, carrying its own
source_rollup_watermark, because the original invoice is the evidence of what the customer was charged.
Follow-up
- The gap is 0.4% in one direction on one day and 0.4% the other way the next day. What does that shape rule in, and what does it rule out?
- How do you distinguish a duplicate from a restatement, given
revisionandrecomputed_aton the rollup? - Ingest is still running while you investigate. What makes your two numbers comparable at all?
Fold a deduplicated usage stream into hourly rollups
You are given one day of usage_event rows, up to 250 million, each carrying event_id, tenant_id, workspace_id, environment, sku, quantity numeric(20,6), idempotency_key, occurred_at and ingested_at. Produce usage_rollup_hourly cells keyed (tenant_id, workspace_id, sku, hour_start) with quantity_sum, event_count and source_max_ingested_at. An event counts once per (tenant_id, idempotency_key). The rollup grain has no environment column, so state your filter. One pass. Give your time and space bounds, and say what the deduplication actually costs in memory.
Approach
- Bucket on
occurred_at, neveringested_at:hour_start = date_trunc('hour', occurred_at at time zone 'UTC'). The two columns answer different questions.occurred_atsays which hour the customer is billed for;ingested_atsays how current the fold is. Using the second for the first makes late data invisible instead of correctable. - The fold is trivial and the deduplication is the entire cost, so price it before designing anything clever. An exact set over
(tenant_id, idempotency_key)at 250M entries, stored as a 16-byte 128-bit hash in an open-addressed table at 0.7 load factor, needs about 357M slots at 16 bytes each, roughly 5.7 GB. The fix is partitioning byhash(tenant_id) % Pso each shard holds 1/P of the set and no tenant's keys straddle shards. - Rule out a Bloom filter as a replacement, in the right direction: a false positive reports 'already seen' for an event never seen, so you drop a real event and lose revenue with no error raised. It is usable only as a negative pre-filter in front of the exact set, where a miss is conclusive and a hit must fall through to the real lookup.
- Accumulate in scaled integers, not binary floating point.
numeric(20,6)admits values below 10^14, so one event scaled to micro-units can reach 10^20, past int64's 9.22 x 10^18; use a 128-bit or arbitrary-precision accumulator unless you first bound the per-event maximum. binary64 represents integers exactly only to 2^53, about 9.01 x 10^15, and cannot represent 0.1 at all, so two runs that sum in different orders disagree. - Carry
source_max_ingested_at = max(ingested_at)over the events folded into each cell, and countevent_countover accepted, post-dedup events. Without that watermark there is no way to prove later what a number did and did not include, which is the first question any reconciliation asks. - State the environment filter explicitly, because the rollup grain cannot record it. A fold that quietly includes
stagingbills non-production traffic; one that quietly excludes it loses a cost signal. Production-only is the billing answer, and either way it belongs in the job name and the output metadata. Complexity: O(n) time, O(distinct dedup keys) space, dominated by the dedup set rather than by the cells.
Follow-up
- A producer retries at 23:59:59 and the retry lands at 00:00:01. The unique index on the daily-partitioned table must include the partition key. What gets double-counted, and what is the smallest change that fixes it?
- The consumer acknowledges its batch before committing the fold. Which failure loses revenue now, and which arrangement duplicates instead?
- What makes a re-run over the same day produce byte-identical rollups?
Parse and verify a timestamped multi-signature webhook header
An inbound webhook carries a signature header of at most 1 KiB shaped t=<unix seconds>,v1=<64 hex chars>, with up to five v1 values during secret rotation and possibly unknown scheme keys. You hold the raw request body bytes and the currently active signing secrets. Write the parser and the verifier: accept when any active secret reproduces a signature and the timestamp is within a five-minute tolerance in either direction, reject otherwise. Single left-to-right pass over the header, no regular expression. State what is inside the MAC and why.
Approach
- Parse in one scan: split on
,, then on the first=only, since a value may itself contain=under a future scheme. Accepttexactly once and treat a secondtas a reject rather than last-wins. Push everyv1onto a short list and ignore any other key, so av2can be introduced later without breaking this verifier. - Say what is signed: HMAC-SHA256 over the exact byte string
<t>.<raw body bytes>, yielding 32 bytes or 64 hex characters. The timestamp sits inside the MAC because otherwise an attacker replays yesterday's body with its still-valid signature and only has to edit the header timestamp. - Hash the bytes as received. Verifying against a re-serialised JSON body is the usual defect: key order, whitespace and number formatting all change the bytes while the parsed objects compare equal, so signatures fail for honest senders and the popular 'fix' is to stop checking.
- Compare in constant time over fixed-length digests. Decode the hex to 32 bytes, accumulate
acc |= a[i] ^ b[i]across the whole length, and testacc == 0at the end. Evaluate every candidate without an early exit; at five candidates that is five HMACs over the body, linear in body size and negligible beside the network. - Apply the tolerance as a two-sided bound, rejecting when
|now - t| > 300seconds. A sender whose clock runs ahead of yours is an ordinary case, and an unbounded future timestamp is a free replay window. - Complexity: O(L) over the header producing k candidates, plus k HMACs at O(|body|) each. Space is O(k) beyond the body itself. Do the cheap rejections, including the tolerance check, before any cryptography runs.
Worked solution 15 min
- Write the grammar on one line before coding:
header := field (',' field)*,field := key '=' value, split on the first=only. - Implement the parser to return
{t: int, v1: [hex, ...]}, rejecting a missingt, a duplicatet, anyv1that is not 64 hex characters, and a header over 1 KiB, all before any cryptography runs. - Implement the verifier: for each active secret compute
HMAC-SHA256(secret, f'{t}.'.encode() + raw_body), compare it in constant time against each parsedv1, and OR the results with no early exit. - Test with a valid signature; the same body with
tmoved 400 seconds into the past; the same body witht400 seconds into the future; a header carrying an unknownv2=alongside a validv1; and a body re-serialised with different JSON key order.
Follow-up
- The body is 40 MB. What changes about where you verify, and what can you do before the whole body has arrived?
- A customer reports that signatures fail for exactly the requests whose body contains a non-ASCII character. What is your first hypothesis?
- How do you rotate the signing secret with no failed deliveries, and how long do both secrets stay live?
Rebuild an hourly rollup with deduplication and late-arrival accounting
From usage_event (event_id, tenant_id, workspace_id, environment, sku, quantity numeric(20,6), idempotency_key, occurred_at, ingested_at), produce the values usage_rollup_hourly should hold for one tenant over one day: per (workspace_id, sku, hour_start) the deduplicated quantity_sum, event_count and source_max_ingested_at, bucketed by occurred_at. Duplicates share (tenant_id, idempotency_key). Also report, per hour, the running total across the day and the share of quantity that arrived more than two hours after the hour began. Write the query, and state which duplicates a daily unique index cannot catch.
Approach
- Deduplicate in its own CTE before any aggregation, because a SUM cannot be un-summed:
row_number() over (partition by tenant_id, idempotency_key order by ingested_at, event_id) = 1. Include the tiebreaker. Without it the surviving row is non-deterministic when two duplicates share an ingested_at, and a rollup described as deterministically recomputable then disagrees with itself between runs. - Bucket on occurred_at and nothing else, and pin the timezone explicitly.
date_trunc('hour', timestamptz)truncates in the session's TimeZone setting, so the same query run by a session set to a non-UTC zone buckets differently; use the three-argumentdate_trunc('hour', occurred_at, 'UTC')on PostgreSQL 16 or later, ordate_trunc('hour', occurred_at at time zone 'UTC') at time zone 'UTC'before that. Filterenvironment = 'production'explicitly, since metering covers three environments and billing covers one. - Aggregate to the grain with
sum(quantity),count(*)andmax(ingested_at). The last is not decoration: it is the watermark the row consumed up to, and without it there is no way to prove afterwards what a number did and did not include. - Compute the late share inside the dedup-and-aggregate step as a conditional aggregate,
sum(quantity) filter (where ingested_at > hour_start + interval '2 hours'), then divide by the hour's total. Compute the running total as a window over the already aggregated rows:sum(quantity_sum) over (partition by workspace_id, sku order by hour_start rows between unbounded preceding and current row). Running either over raw rows puts the duplicates back. - Answer the index question exactly. The unique constraint is on (ingested_day, tenant_id, idempotency_key), because a unique index on a partitioned table must contain the partition key. It therefore deduplicates only within one ingest day and admits a duplicate whose retry crosses midnight or whose replay runs a week later. That is why this CTE dedups across the whole window being recomputed, and why the dedup horizon is a correctness parameter rather than a retention cost.
- Keep the numeric type all the way through. quantity is numeric so the sums are exact; a cast to double precision anywhere in this pipeline reintroduces drift that surfaces only as a few unreconcilable cents per tenant per month, long after the query is out of anyone's mind.
Follow-up
- A dispute forces the same recompute over 40 days for one tenant. What changes about the dedup CTE's memory use and the chosen plan, and what would you do about it?
- Two runs a minute apart return different quantity_sum values for an hour that is already closed. Give two mechanisms that produce that, and the single query that distinguishes them.
- Express the same rollup incrementally so it does not re-scan the day each time the watermark advances. What does the incremental version stop being able to answer?
Explain why the metering dashboard scans every daily partition
usage_event is range-partitioned daily on ingested_at and holds tenant_id, workspace_id, environment, sku, quantity numeric(20,6), occurred_at and ingested_at. The only relevant index is on (occurred_at). A dashboard runs select sku, sum(quantity) from usage_event where tenant_id = $1 and date_trunc('hour', occurred_at) >= $2 and environment = 'production' group by sku, and EXPLAIN shows a sequential scan of every partition. Give each distinct reason, rewrite the predicate so an index can serve it, propose the index, and state the write cost its column order adds.
Approach
- Separate the three causes rather than blaming one. First,
date_trunc('hour', occurred_at)wraps the column, so the predicate is not sargable against a btree on the bare column. Second, pruning keys off ingested_at while the query constrains occurred_at, so no partition can be excluded. Third, even made sargable, (occurred_at) is not tenant-leading, so for one tenant among thousands the scan reads the whole time range and discards nearly all of it. - Rewrite the bound carefully, because the obvious rewrite is only conditionally equivalent.
date_trunc('hour', x) >= $2equalsx >= $2only when $2 is already hour-aligned; for an arbitrary $2 it meansx >= date_trunc('hour', $2) + interval '1 hour'. Normalise the parameter in the caller and leave the column bare. - Restore pruning with a second, redundant predicate on the partition key:
ingested_at >= $2 - interval '<late-data horizon>'. State both sides of it. It prunes to a handful of partitions, and it silently omits any event whose ingest lagged past that horizon, which is precisely what a producer replay produces. Either document the horizon as a stated bound, or partition on occurred_at and move the problem into the dedup window instead. - Propose
(tenant_id, occurred_at) include (sku, quantity)per partition. A partial indexwhere environment = 'production'mostly saves size rather than selectivity, since production dominates the three environments; take it if non-production is a meaningful share and skip it otherwise. - Price the write path honestly. At roughly 250M rows/day each extra index is another insert plus WAL per row, and a tenant-leading key scatters inserts across one hot leaf per active tenant instead of appending to a single rightmost leaf, so page dirtying and random I/O both rise. An INCLUDE payload widens every leaf entry and enlarges the index accordingly.
- Add the index-only-scan caveat before someone reports it as a regression: on a freshly appended table the visibility map is not yet set for recent pages, so the INCLUDE columns still cost heap fetches until autovacuum has been through, and the newest hour is exactly the data the dashboard reads.
Worked solution 30 min
- Build 30 daily partitions with skewed tenants, one holding about 40% of the rows, then ANALYZE.
- Run
explain (analyze, buffers)on the original query and record how many partitions were scanned and the rows removed by filter. - Apply the rewritten predicate and the index, re-run, and confirm the plan lists only the partitions inside the ingested_at bound.
- Re-run with $2 set to a non-hour-aligned timestamp and confirm the rewritten and original predicates return identical rows.
- Insert an event with ingested_at six hours past occurred_at and check whether the pruning predicate excludes it.
Follow-up
- CREATE INDEX CONCURRENTLY is not supported on a partitioned parent. Give the sequence that gets this index onto 400 existing partitions without blocking ingest.
- One tenant holds 200 times the median row count and the dashboard still times out for them with the index in place. What changes?
- Should this read hit
usage_rollup_hourlyinstead? State what that costs in freshness and what the watermark lets you promise.
How would you approach a modified binary search problem?
How would you approach a modified binary search problem?
Approach
- Clarify what is being asked and what a complete answer contains.
- Say what you would check first and why it is the highest-information step.
- Work from the requirement backwards to the design.
Follow-up
- What assumption would you test first?
- How would you know your answer was wrong?
Explain your past project experience and the technical challenges you …
Explain your past project experience and the technical challenges you overcame.
Approach
- Work from the requirement backwards to the design.
- State your assumptions explicitly before working the problem.
- Clarify what is being asked and what a complete answer contains.
Follow-up
- What assumption would you test first?
- How would you know your answer was wrong?
Metering ingest that survives a six-hour producer replay
metering-ingest consumes usage events at-least-once - 250M/day, 10-40k/second at peak - and folds them into usage_rollup_hourly keyed (tenant_id, workspace_id, sku, hour_start). usage_event is partitioned daily on ingested_at with unique (ingested_day, tenant_id, idempotency_key). A producer outage ends in a six-hour replay that re-sends events already ingested, some of whose originals crossed midnight. Design the consumer: partitioning, where the acknowledgement sits relative to the commit, the deduplication horizon and its storage cost, and how the rollup watermark advances. Nothing may be double-counted and nothing may be silently dropped.
Approach
- Choose the acknowledgement position deliberately and name what each choice costs. Acknowledging after the fold commits makes the consumer at-least-once: a crash between the two replays the batch and produces duplicates, which are ordinary and absorbable. Acknowledging first makes it at-most-once: a crash between the two drops revenue with no error raised anywhere and no way to detect it later. Take at-least-once and design everything downstream to absorb duplicates.
- Put the dedup and the fold in one transaction so there is no window between them. Insert the batch into usage_event with ON CONFLICT DO NOTHING, take the rows actually inserted, and fold only those into usage_rollup_hourly with an upsert on (tenant_id, workspace_id, sku, hour_start) bucketed by occurred_at, not ingested_at. A batch of about 2,000 rows is one round trip and one index probe per event.
- Attack the partition-key flaw head on: the unique index includes ingested_day because a unique index on a partitioned table must contain the partition key, so the same (tenant_id, idempotency_key) re-sent after midnight is a different index entry and passes. Deduplicate instead against a store keyed (tenant_id, idempotency_key) with no date component, whose horizon exceeds the producer's maximum retry window plus the longest replay you intend to support. At 14 days that is 250M x 14 = 3.5 billion keys, which is a dedicated key-value store, not a larger index on the same table. The alternative - partitioning usage_event on (tenant_id, occurred_day) so the natural key is stable - fixes dedup but loses pruning on ingest time and makes retention by dropping partitions awkward.
- Partition the consumer by hash of tenant_id so one tenant's replay stalls only its own partitions, and give replay traffic a separate lower-priority lane so live ingest keeps its latency. The cost is explicit: that tenant's watermark lags while the replay drains, and everything gated on the watermark waits for it.
- Define the watermark as a property of committed work, not of wall-clock time: per partition it is the largest occurred_at such that every event with a smaller occurred_at has committed, and the sealing decision uses the minimum across partitions. Record source_max_ingested_at on every rollup row so any number can prove what it did and did not include, and keep restatement legal only while status = 'open' - after sealed_at the value is frozen and a late event becomes an invoice adjustment instead.
Worked solution 40 min
- Write the consumer loop in pseudocode with the acknowledgement after the commit, then annotate each line with what is lost or duplicated if the process dies exactly there.
- Size the dedup store: events/day x horizon_days keys, bytes per key including the tenant prefix, and the resulting memory or disk. Compare that cost against simply extending retention on the partitioned table and say why the latter does not fix the problem.
- Take one event ingested at 23:59:58 and replayed at 00:00:04 and work out its fate under (a) the partitioned unique index alone and (b) the separate dedup store.
- Write the per-partition watermark formula, then what the seal uses, then what a single stalled partition does to sealing.
Follow-up
- The dedup store is lost entirely. What can you still guarantee, and how do you rebuild it from what remains?
- A replay delivers events for an hour that is already sealed. Trace exactly what happens to them, row by row.
- One partition is stuck on a poison message, so the minimum-across-partitions watermark never advances and no tenant can be sealed. What is your escape hatch and what does it cost in correctness?
Hourly rollups merge one hour and lose another
Reconciliation flags one tenant on one day. Summing usage_event.quantity by hour of occurred_at gives 24 non-empty hours, but usage_rollup_hourly holds 23 rows for that tenant, workspace and SKU, one of which carries roughly the sum of two adjacent hours. Other days reconcile exactly, and the affected date matches a civil-time transition. hour_start is documented as truncated to the hour in UTC. You have both tables, the rollup job source, and its runtime environment. Give an ordered checklist, the mechanism, and the correction path for a day that may already be sealed.
Approach
- Bisect by dimension until one cell explains the whole difference: tenant, then day, then SKU, then hour. A defect confined to a single transition date already rules out deduplication and late arrival, both of which are indifferent to which hour an event lands in.
- Read the truncation with its precondition stated: date_trunc on a timestamptz value is evaluated in the session TimeZone, not in UTC. If the job connects without pinning that setting, it inherits the server or container default.
- Follow that to the collision: in a zone that observes daylight saving, two distinct UTC hours map to the same local wall-clock label at the autumn transition, so both fold into one key under the unique constraint on (tenant_id, workspace_id, sku, hour_start) and their quantities sum into one row. At the spring transition a label never occurs and the row is simply absent.
- Confirm from data rather than from reading code: run the same aggregate twice, once with the session pinned to UTC and once with the job host zone, and check that the second reproduces the stored rollup exactly.
- Fix at the source by pinning the connection to UTC explicitly, or by truncating on occurred_at AT TIME ZONE 'UTC', rather than relying on a default that differs between a developer machine, CI and production.
- Correct according to status, not convenience: an open hour is recomputed with revision incremented, a sealed hour is frozen and the difference becomes an adjustment line on the next invoice with voided_by_line_id pointing at the line it reverses.
Follow-up
- The same job also emits a daily figure for a dashboard. Why can a correct hourly rollup still produce a wrong day, and what does the tenant's billing timezone have to do with it?
- How would you detect this class automatically rather than waiting for reconciliation, given that it only manifests twice a year per zone?
For a candidate senior enough that the loop turns on design and judgement rather than on whether the coding round gets finished. Five days build one system properly and then stress it; coding gets a single maintenance day, on the assumption that the risk at this level is an unexamined tradeoff rather than a missed algorithm.
Prepare, practise & reflect
One practical outcome each day. Spend longer where you need it.
0 / 7 done01Numbers before diagrams
- Build your own reference card of the figures you will re-derive all week: bytes for a realistic record, requests per second implied by a given daily active count, and the storage that a year at a given write rate produces. Derive each one rather than copying it, because the derivation is what survives a follow-up.
- Turn one product statement into capacity requirements. From ten million daily users at four writes and forty reads each, state the peak-to-average factor you are assuming and why, then produce peak write QPS, peak read QPS and a year of storage.
- Write the two numbers whose order of magnitude changes the design, the read-to-write ratio and the working-set size against memory per node, and state the threshold at which each one flips your answer.
Deliverable: A one-page numbers card and one worked capacity estimate with every assumption written down.
Practice prompt ↗Practice prompt ↗Worked solution ↗02One system, from requirements to schema
- Spend the first ten minutes producing only functional requirements, non-functional targets with numbers attached, a p99 latency, a durability expectation, a consistency requirement, and an explicit out-of-scope list.
- Define the interface before the boxes: the three or four endpoints, their parameters, what each returns, and which of them are idempotent.
- Write the data model, then write the single access pattern that justifies it, and state what the schema would have to become if the dominant access pattern were the other one.
Deliverable: One design carried to endpoint-and-schema depth, with non-functional targets expressed as numbers and a written out-of-scope list.
Practice prompt ↗Practice prompt ↗03The consistency you are actually buying
- Write out what a client sees under asynchronous replication when its write commits on the leader and its next read is served by a lagging follower, then write the two fixes, pinning that session's reads to the leader for a bounded window or carrying a version token the replica must reach, and the cost of each.
- Work the quorum arithmetic on paper for N of three with W and R of two, and separate what R + W > N does guarantee, that any read set intersects any write set, from what it does not: on its own it is not linearizability, and a sloppy quorum that accepts writes on nodes outside the preference list breaks even the intersection.
- Take two storage choices with different defaults, a single-leader relational store committing synchronously and a quorum-replicated store that converges eventually, and write the specific product behaviour that would be wrong under each, rather than a general statement about which is stronger.
Deliverable: A page separating what quorum overlap guarantees from what it does not, with one concrete product misbehaviour attached to each gap.
Practice prompt ↗Practice prompt ↗04Failure is the design
- For one write path, work through the case where the client times out after the server has already committed, then design the idempotency key: who generates it, how long it is retained, and what the duplicate request returns.
- Express the retry policy as parameters rather than as a word: maximum attempts, base delay, backoff factor, jitter, and which error classes are retried at all. Then state why retrying a non-idempotent write without a key is a correctness bug and not merely waste.
- Compute the fan-out effect on tail latency. If a request waits on ten backends and each independently exceeds its p99 one percent of the time, the chance at least one is slow is 1 - 0.99^10, about ten percent. Then write why independence is the optimistic assumption and what correlates them in practice.
- Name the backpressure mechanism for one queue or one dependency in the design, a bounded queue with shedding or a concurrency limit, and write what the caller is told when it engages.
Deliverable: One write path with an idempotency design, a parameterised retry policy, and a written tail-latency calculation with its assumption named.
Practice prompt ↗Practice prompt ↗Worked solution ↗05Scaling the hot path
- Choose cache-aside or write-through for one read path and write the staleness window each produces, then name the invalidation event and what the system does when that event is lost.
- Design against the stampede: either coalesce requests so only one recomputes a missing key, or refresh early with jittered expiry, and write why identical TTLs on keys populated in the same moment produce a synchronised expiry and a thundering herd.
- Shard one table by a key you choose, then answer the two questions that break the choice: which queries now require a scatter-gather, and what happens to the distribution when one tenant is a hundred times larger than the median.
- Write the cost of adding a node under plain modulo placement, where nearly every key moves, against consistent hashing, where roughly one key in n+1 moves, and state what virtual nodes are for.
Deliverable: A caching and sharding decision for one path, each with its failure mode and its rebalancing cost written beside it.
Practice prompt ↗Practice prompt ↗06Keep the coding hand in, at the bar that applies to you
- Solve one medium problem in thirty minutes, then spend twenty more making it production-shaped: named invariants, validation at the boundary, and errors that distinguish a caller mistake from an internal fault.
- Write the tests you would require of a colleague's version of that function: one for empty input, one for the boundary, and one for the case the implementation is most likely to get wrong.
- Read a piece of your own code from six months ago and write the change you would ask for, phrased as you would actually phrase it in review.
Deliverable: One problem hardened to review standard, with its test list and one written review comment.
Practice prompt ↗07Defend it while being interrupted
- Run a forty-five-minute design mock with an interviewer briefed to change a requirement halfway, a tenfold traffic increase or a new strict consistency requirement, and to push on one number you estimated.
- Rehearse the two sentences a senior loop is listening for: naming the tradeoff you are choosing against and why, and saying what you would measure to learn that the choice was wrong.
- Prepare the design you regret: a real decision, the constraint that produced it, what it cost, and what you changed afterwards.
Deliverable: Mock notes recording how the design changed under the new requirement, plus a written account of one regretted decision.
Practice prompt ↗Worked solution ↗Expand any day for tasks and deliverables. Your progress is saved on this device.
Nobody is scoring your stamina at three in the morning. What carries weight is which signal told you something was wrong, what you measured before touching anything, what you rolled back versus what you fixed forward, and why you picked one. 'We restarted it and it went away' is a story about not knowing.
Unblock an engineer on a job run that finished twice
An engineer two weeks into the team brings you a job_run row showing status succeeded with an exit_code written by a worker declared dead ten minutes earlier; the retry attempt also shows succeeded. They have spent a day adding logging and are no closer. You have twenty minutes and you do not want to take the keyboard. Describe how you unblock someone: the question you ask first, what you let them find themselves, the concept you name and when, and how you check the next day that they own the fix rather than having watched you produce it.
Approach
- Ask what they expect rather than what they see: which statement set status to succeeded, and what did it check before writing? That question points directly at the update's WHERE clause, which is where the answer lives, and it costs them nothing to answer, so it does not read as a test.
- Let them build the timeline themselves from the row: queued_at, started_at, leased_until, finished_at and worker_id, on both the original run and the retry. Two different worker_ids with a lease expiry between them tells the whole story, and they will see it before you say it.
- Name the concept once the evidence has earned it. A lease bounds time; it does not prevent a write. The store has to reject a stale writer, which means the update carries a fencing token the row compares — update job_run set status = 'succeeded' where run_id = $1 and lease_token = $2 and status = 'running' — and a long garbage-collection pause or a brief partition is enough to produce what they are looking at.
- Point at the second, less obvious half and let them decide it: 'lost' exists in the status enum precisely so a run whose worker vanished is not recorded as failed, because failed asserts an outcome nobody observed and the system then bills and retries on that assertion. Ask them what these two rows should have said.
- Leave them with the next step rather than the patch — a test that kills the first worker after the sandbox exits and before the row is written — and say when you are available again, so the offer is real rather than polite.
- Check ownership the next day by what they produced, not by asking if it went well: a test that reproduces the window proves they understood it; a test that only asserts the new WHERE clause proves they copied it. Ask them to explain it to a third person and listen for whether the explanation is theirs.
Follow-up
- They propose a longer lease instead of a token. What do you say, and what breaks when legitimate runs last thirty minutes?
- How can you tell whether your explanation landed or they simply deferred to you?
- The same engineer hits a variant of this next month. What did you fail to teach the first time?
Ship metered billing with a named deduplication horizon
Metered billing must be on in three weeks. usage_event is partitioned daily, so its unique index must include the partition key and deduplicates only within a day: a producer retry that crosses midnight, or a replay run a week later, gets through. A cross-partition dedup store is two weeks you do not have. Describe shipping with debt you named in advance: what you shipped, what you wrote down, the detector you added, the trigger and date for paying it off, and what you would have refused to ship under the same pressure.
Approach
- Show you can separate the two kinds of debt, because that distinction is what the question actually probes. Debt that costs engineering time later is shippable on a deadline. Debt that silently corrupts a number a customer gets charged for is not shippable unless the corruption is detectable, and detectability is the whole negotiation.
- Make the exposure narrow and measured rather than gestural. The hole is duplicates whose occurrences straddle a UTC day boundary, plus any replay older than partition retention. Measure it before arguing about it: how often an idempotency_key recurs at all, and the distribution of the gap between first and last occurrence. If the ninety-ninth percentile of that gap is four minutes, the residual risk is a small band around midnight and you can say so numerically.
- Add the detector before the feature, not after. A nightly job counting keys that appear in more than one partition is one grouped scan over recent partitions, and it converts a silent overcount into a page. State what it costs to run and what it fires on.
- Buy the cheap half of the real fix immediately: extend partition retention so the dedup horizon exceeds the producer's maximum retry window plus the longest replay you intend to support. That reframes retention as a correctness parameter rather than a storage cost, which is the sentence you need on record before someone optimises the bill.
- Make repayment mechanical instead of aspirational: a dated entry with a named owner, plus a threshold that pulls the date forward — first detector hit above N events, or first customer dispute. Debt with a trigger gets paid; debt with only a date does not.
- Answer the second half honestly by naming what you would refuse under identical pressure: the sealing path, because a sealed row is frozen and a wrong number there stops being a bug and becomes an adjustment line, a dispute and an audit question.
Follow-up
- The detector fires on forty duplicate events for one tenant, and two of their invoices have already sealed. What happens next?
- Whom did you tell that the billing numbers had a known hole, and in what words?
- Finance asks you to cut storage by shortening partition retention. What do you say, and to whom?
Resolve a review disagreement over a quota check
A colleague's pull request enforces a per-tenant quota by selecting the current count and then inserting when it is under the limit. You flag it as a race. They reply that the transaction already runs at repeatable read, so the snapshot makes it safe, and the tests pass. Walk through taking that disagreement to a resolution: what you write in the review, what you demonstrate rather than assert, which fix you propose and why, and what you do if they still disagree after all of it.
Approach
- Answer the claim precisely instead of restating your objection, because they have made a specific technical argument. In PostgreSQL, repeatable read is snapshot isolation; this is write skew, which snapshot isolation permits by design. Both transactions read a count that is stable within their own snapshot, insert disjoint rows that the other cannot see, and both commit, so the limit is exceeded by exactly the concurrency.
- Demonstrate rather than cite. Two psql sessions, both BEGIN ISOLATION LEVEL REPEATABLE READ, both select the count, both insert, both commit: it succeeds. Repeat at SERIALIZABLE and the second commit fails with serialization_failure, SQLSTATE 40001. That takes two minutes, ends the argument without anyone conceding a position, and leaves an artefact for the next reviewer.
- Offer the options with their costs rather than a verdict. Serialisable plus a retry loop on 40001 is correct but obliges every caller to retry and degrades under contention. An increment-and-compare on a counter row — update tenant_quota set used = used + 1 where tenant_id = $1 and used < limit returning used — is safe even at read committed, because a blocked updater re-evaluates the WHERE clause against the row version it finally locks, and zero rows returned means full. A unique or exclusion constraint that makes the surplus write fail is the third.
- Name the plausible non-fix explicitly, since it is what usually gets merged instead: folding the count into the insert as insert ... select ... where (select count(*) ...) < limit is still racy under read committed, because the subquery cannot see the other transaction's uncommitted rows. It looks atomic and is not.
- Say what you do if they still disagree: escalate the decision rather than the disagreement. Attach the reproduction, hand it to the service owner or a third reviewer, and state that you will not block the merge if the owner accepts the risk knowingly — and that you want that acceptance written down.
- Close with the general lesson worth leaving in the review thread: a passing suite is weak evidence for a concurrency claim because it runs one request at a time. Ask for a test that runs two.
Follow-up
- Write the counter-row version. Does your answer change if the quota counts child rows rather than a column?
- Under serialisable, who performs the retry, and what does the API client see if the retry also fails?
- This is the third disagreement with the same reviewer this month. What changes in how you review?
- 01
An engineer two weeks into the team brings you a job_run row showing status succeeded with an exit_code written by a worker declared dead ten minutes earlier; the retry attempt also shows succeeded. They have spent a day adding logging and are no closer. You have twenty minutes and you do not want to take the keyboard. Describe how you unblock someone: the question you ask first, what you let them find themselves, the concept you name and when, and how you check the next day that they own the fix rather than having watched you produce it.
- 02
Metered billing must be on in three weeks. usage_event is partitioned daily, so its unique index must include the partition key and deduplicates only within a day: a producer retry that crosses midnight, or a replay run a week later, gets through. A cross-partition dedup store is two weeks you do not have. Describe shipping with debt you named in advance: what you shipped, what you wrote down, the detector you added, the trigger and date for paying it off, and what you would have refused to ship under the same pressure.
- 03
A colleague's pull request enforces a per-tenant quota by selecting the current count and then inserting when it is under the limit. You flag it as a race. They reply that the transaction already runs at repeatable read, so the snapshot makes it safe, and the tests pass. Walk through taking that disagreement to a resolution: what you write in the review, what you demonstrate rather than assert, which fix you propose and why, and what you do if they still disagree after all of it.
Is this an official Altizon Systems interview guide?
No. It is PracHub's own research and practice material for the Software Engineer role at Altizon Systems. Rounds and questions reflect what candidates have reported, not a process Altizon Systems has published, and they change over time. Confirm the current format and scope with your recruiter.
PracHub interview research ↗How long does the interview process typically take?
The timeline varies, but generally, the process moves efficiently from the initial screening to the final rounds. Expect a multi-week process, as the technical assessments are thorough.
PracHub interview research ↗Is the coding round focused on platform-specific languages?
Candidates report that the interviews focus on your ability to solve problems in the language you are most comfortable with. Algorithmic logic and clean coding practices count for more than familiarity with a specific syntax.
PracHub interview research ↗What is the most common reason candidates do not pass?
Candidates often struggle when they fail to communicate their thought process during live coding or when they cannot justify the architectural trade-offs in system design. Always talk through your reasoning before diving into the solution.
PracHub interview research ↗Sources & methodology 3 sources ↗
No official company page is cited. Rounds and questions come from candidate reports and PracHub editorial material; each source shows the date it was read.
- 01PracHub interview research ↗
PracHub editorial research into this company and role, maintained with this guide. Candidate-reported, not an employer publication.
PracHub page · Accessed 2026-09-22 - 02PracHub Software Engineer practice ↗
Cross-company practice questions for this role.
PracHub page · Accessed 2026-09-22 - 03PracHub interview preparation framework ↗
The framework the preparation plan follows.
PracHub page · Accessed 2026-09-22
Explore related engineering environments and compare the preparation focus.
Vercel Software Engineer Interview Guide
Debugging practice for Vercel software engineer prep built on a reproduction you trust, narrowing to the smallest failing input, and changing one variable per run so the result stays attributable.
Together Ai Software Engineer Interview Guide
Failure-handling practice for Together Ai software engineer candidates: requests whose outcome a timeout leaves unknown, where a retry is safe, and deduplicating at the receiver instead of assuming exactly-once delivery.
Scale Ai Software Engineer Interview Guide
Data structures and algorithms practice for Scale Ai candidates, where stating a bound means stating its precondition: constant-time hash lookup is an average case over keys that spread.
Notion Software Engineer Interview Guide
Data structures and algorithms practice for Notion candidates, where stating a bound means stating its precondition: constant-time hash lookup is an average case over keys that spread.