As a Data Scientist at ATB Financial, you operate at the intersection of complex financial data and human-centric banking solutions. Your role is pivotal in transforming raw information into actionable insights that drive product strategy, optimize risk assessment, and enhance the digital experience for Albertans. You are not just building models; you are solving real-world financial challenges that require a deep understanding of both statistical rigor and the practical constraints of the banking industry.
Working at ATB Financial means navigating a landscape where data privacy, accuracy, and customer trust are paramount. You will collaborate with cross-functional teams—ranging from product managers to engineering—to design experiments, monitor product metrics, and implement machine learning solutions that scale. This role offers the opportunity to influence major strategic initiatives, making it an ideal environment for a Data Scientist who thrives on technical complexity and tangible business impact.
Initial Screening
reportedA screening call is a matching exercise run by someone who will not evaluate your statistics. They are checking that the work described on your resume is work you personally did, and that its scope matches the level the role is written for. Logistics get settled in the same half hour so nobody spends an interviewer's afternoon on a mismatch. The answer that fails is the one narrated in the plural. If every sentence is 'we built' and 'the team decided', there is nothing specific to write down about you. Name the piece that was yours, the decision you made inside it, and what changed after.
What to demonstrate
- Whether the ownership implied by your resume survives one round of follow-up about who actually did which part
- Whether your described scope (data size, stakeholders, what shipped) matches the seniority the role is written at
- Whether timeline, location and compensation expectations make the rest of the loop worth scheduling
How to prepare
- Rewrite your top three resume bullets in the first person singular, each with the decision you made and what moved afterwards, then say them out loud once so the 'we' does not return under pressure
- Attach one number to each project: the baseline, the change, and the window it was measured over. Where impact was never measured, say that plainly rather than inventing a figure
- Settle your compensation range before the call and give it as a range with a reason behind it, such as current total comp or a competing timeline, instead of deflecting the question twice
Technical Evaluations
reportedThis round decides whether someone can hand you a schema and a question and trust the number that comes back. Correctness under a clock is the bar, not clever syntax. The habit that separates strong from weak answers is checking the grain: after every join, know how many rows you expect and whether the count moved. Most wrong answers in this format are not wrong logic, they are a fan-out from a key that turned out not to be unique, or a filter applied before an aggregate when it belonged after. Say what you expect before you run it.
What to demonstrate
- Whether your row counts survive each join, and whether you notice on your own when they do not
- Deliberate handling of rows that fail to match, including whether the question needs an inner join or a left join with the non-matches kept and counted
- Whether NULLs are treated on purpose, given that a NULL compares equal to nothing and that COUNT of a column skips it
- Reaching a defensible answer inside the window instead of a refined one after it
How to prepare
- Take a two-table schema, write a join that fans out on purpose, then fix it by collapsing the many-side to one row per key before joining. Repeat until the fix is reflex rather than recall.
- Write a funnel as one query and print the distinct user count at each stage, then confirm each stage is a subset of the one above it rather than assuming it
- Do a few timed runs in a plain text box with no autocomplete and no formatter, since assessment editors often have neither
Leadership Discussions
reportedAn added round often puts you in front of someone outside the core hiring team: a partner engineer, a product owner, a domain expert, sometimes a more senior manager. The question they are really asking is not whether you can do the work but whether they would trust a number that came from you. That changes what a good answer looks like. Lead with what the decision cost and what it changed, keep the method available but not central, and be plain about the limits of your evidence. Overstating a result is the fastest way to lose this round.
What to demonstrate
- Whether you can explain a technical choice to someone who will never read your code, without either flattening it into nothing or hiding inside jargon
- Honesty about evidence strength: what the analysis establishes, what it only suggests, and what it cannot say at all
- How you take disagreement, specifically whether you update on a good objection, hold your position with reasons, or fold on contact
How to prepare
- Write the two-sentence version of your most technical project for a non-specialist, then check that neither sentence needs a method name to make sense.
- For one result you are proud of, write the strongest objection someone could raise and a response that concedes the part of it that is correct.
- Prepare one decision that turned out to be wrong: how you found out, what it cost, and what you changed afterwards. A senior cross-functional interviewer asks for this more often than a technical one does.
PracHub editorial advice for the preparation topics above.
Counting authorizations instead of weighting them, and summing amounts across currencies
Declines skew toward high-value, cross-border and card-not-present transactions, so an unweighted approval rate can sit flat while approved value falls. Merchant retry logic also turns one declined purchase into several rows, inflating the denominator by an amount that varies by merchant and by decline reason. Amounts are held in the minor unit of the transaction currency and that unit is not always two decimals, since some currencies have none and some have three, so summing amount_minor across currencies produces a figure with no interpretation at all.
Assuming a model is fair because protected attributes are not among its inputs
Postcode, device, tenure, income proxies and even transaction patterns correlate with protected characteristics, so a model can produce a disparate outcome without ever reading the attribute. Credit decisions additionally carry an explainability obligation in many jurisdictions, since a denial has to be accompanied by its principal reasons, which constrains model form and feature engineering rather than being a reporting afterthought. Treating fairness testing and reason-code generation as design constraints from the first model version is far cheaper than retrofitting them to a deployed one.
Ignoring interference between units in a marketplace experiment
Ask whether one unit's treatment can change another unit's outcome through shared inventory, a matching pool, a social graph or a common budget. Where it can, randomise at a level that contains the spillover, such as region or time slice, and say explicitly what that costs you in statistical power.
SQL that silently fans out on a one-to-many join
State the grain of each table and the grain you want in the result before writing the join. Pre-aggregate the many side to the join key, or use EXISTS or a window function, and verify with a row count against COUNT(DISTINCT id) rather than trusting that the numbers look plausible.
Choose a category, try a prompt, then open its approach, worked solution or follow-up when you need it.
Bootstrap a fraud loss rate that clusters within merchant
You have a per-transaction frame with auth_id, merchant_id, settled_amount_reporting and net_loss_reporting, both already in one reporting currency. Most rows carry zero loss, a few carry large ones, and losses cluster within merchant. Using only numpy's random generator and no resampling helper from any library, write a bootstrap that returns a 95 percent interval for net fraud loss in basis points of settled volume, resampling merchants with replacement and taking all rows belonging to each drawn merchant. Also produce the naive row-level interval and state which you would report.
Approach
- State the estimator before writing it: total net loss divided by total settled volume, times 10,000. It is a ratio of sums, so each replicate recomputes both sums. Averaging per-transaction loss rates instead would weight a five-unit transaction like a five-thousand-unit one.
- Pre-aggregate loss and volume to merchant level once. For a ratio of sums, drawing merchants and taking all their rows is arithmetically identical to drawing merchant-level (loss_sum, volume_sum) pairs, so a replicate becomes one integer draw plus two vectorised sums rather than a groupby inside the loop.
- Draw B replicates of M merchant indices with replacement, where M is the observed merchant count, compute the ratio per replicate, and take the 2.5th and 97.5th percentiles. Say explicitly that this is a percentile interval and that BCa would correct the skew-induced bias if the decision is close.
- Repeat with independent row draws for the naive interval and compare widths on the same replicate count.
- Report the clustered interval. Rows within a merchant share an acceptance profile, a category code and a fraud exposure, so they are not independent, and the row-level interval understates variance by roughly the design effect.
Worked solution 30 min
- Compute the point estimate directly on the full data and keep it for comparison.
- Aggregate to merchant-level loss and volume arrays, record M, and set B to 2,000 with a seeded numpy Generator.
- In a vectorised loop, draw integer indices of shape (B, M), index both arrays, sum along axis 1, and take the ratio times 10,000.
- Repeat for the row-level version using the per-transaction arrays and N draws.
- Take the 2.5 and 97.5 percentiles of each replicate array and report both intervals alongside the point estimate.
Follow-up
- Your clustered interval is three times wider. How do you explain that to someone who wanted a tighter number?
- One merchant accounts for 40 percent of losses. What does that do to the interval, and what would you do about it?
- How does this change if the question is whether two months differ rather than what this month's rate is?
Collapse retry chains and compute a dollar-weighted approval rate
fct_payment_authorization gives auth_id, card_token_id, merchant_id, amount_minor, transaction_currency, requested_at, auth_result, is_reversal, channel and issuer_country. Two reference frames give the minor-unit exponent per currency and a daily rate to one reporting currency. Collapse retry chains first: attempts sharing card_token_id, merchant_id and amount_minor whose consecutive gaps are under 15 minutes form a single attempt, whose outcome is its last row. Exclude reversals and zero-amount verifications. Return a 7-day rolling dollar-weighted approval rate by channel and issuer_country.
Approach
- Filter before grouping: drop is_reversal rows and zero-amount verifications, since neither is a purchase attempt and both would otherwise sit in the denominator.
- Sort by card_token_id, merchant_id, amount_minor and requested_at, take the gap to the previous row within that key, mark a chain start where the gap exceeds 15 minutes or the key changes, and label chains with a cumulative sum of that flag. This is a gap rule between consecutive attempts, not a fixed clock bucket, so a chain may span more than 15 minutes in total.
- Keep each chain's terminal row by requested_at. If a retry was approved, the purchase was approved; keeping the first row reports the decline that caused the retry as the outcome.
- Convert amounts exactly once: amount_minor divided by 10 to the power of the currency exponent, multiplied by the reference rate for the authorization date. Do not reach for settlement_fx_rate, which is null on precisely the declined rows the denominator needs.
- Build the rolling window as a ratio of two rolling sums, approved value over total value, per channel and issuer_country. A rolling mean of daily ratios weights a quiet Sunday the same as a busy Friday.
Follow-up
- The count-weighted rate is flat while the dollar-weighted rate falls 80 basis points. What do you look at first?
- How would you choose the 15-minute window rather than inheriting it?
- A merchant moves from two retries to five. Which of your two rates moves, and is that a real change in approval quality?
Estimate a delinquency roll-rate matrix and project twelve months
fct_loan_performance_monthly gives loan_id, as_of_month_end, months_on_book, delinquency_bucket, charge_off_flag, prepaid_in_full_flag and restructured_flag. Build a month-to-month transition matrix over the five delinquency buckets plus absorbing charged_off and prepaid states. Loans that stop appearing must be routed to an absorbing state rather than dropped. Project the current book forward 12 months by repeated matrix multiplication and report the projected share reaching charge-off. Handle restructured_flag explicitly, and name one place the Markov assumption fails on this data.
Approach
- Build consecutive month pairs per loan by shifting as_of_month_end within loan_id, then verify the shifted value is exactly one month later. A gap is not a transition, it is an exit you have not resolved yet.
- Resolve exits before counting anything. A loan whose last row carries charge_off_flag moves to charged_off, one carrying prepaid_in_full_flag moves to prepaid, and one that disappears with neither is a data question to raise rather than silently discard, because discarding it is survivorship that inflates every cure rate.
- Count pairs into a 7 by 7 matrix and row-normalise. Assert every row sums to one and the two absorbing rows are the identity; a row that does not sum to one means exits were dropped.
- Decide and state the restructure rule. Restructuring resets days_past_due, so a dpd_60_89 to current move on a restructured loan is not a cure. Either give restructured loans their own state or carry the pre-restructure bucket, but do not let that move land in the cure cell.
- Project by taking the current bucket distribution as a row vector and multiplying by the matrix twelve times. Report the charged_off entry, and report it again from an all-current starting vector so the reader can see how much of the projection comes from loans that are already delinquent today.
- State the homogeneity failure plainly: transition rates depend strongly on months_on_book, so one pooled matrix applied to a book with a young mix understates early-life delinquency. If the mix is moving, estimate separate matrices by seasoning band.
Follow-up
- How would you validate the projection against what actually happened, and over what window?
- The cure rate out of dpd_30_59 rose five points last quarter. What are the candidate explanations and how would you separate them?
- When would you prefer a vintage curve to a roll-rate projection, and why?
Write a SQL query using window functions to calculate a rolling averag…
Write a SQL query using window functions to calculate a rolling average of customer transactions.
Approach
- State the window function and its partition and ordering out loud before writing it.
- Handle the rows that do not match: a LEFT JOIN with a NULL check is usually the question.
- Say which table is the grain you start from, and join outward from it.
Follow-up
- How does the query change if the join becomes one-to-many?
- How would you verify this result without re-running the same query?
Can you explain the difference between various types of joins and when…
Can you explain the difference between various types of joins and when to use each?
Approach
- Check whether any join is one-to-many before aggregating, or the sums inflate.
- Say which table is the grain you start from, and join outward from it.
- Compute rates by summing numerator and denominator separately, never by averaging rates.
Follow-up
- How would you verify this result without re-running the same query?
- What breaks if events arrive late or out of order?
Collapse merchant retry chains before measuring authorization approval
Merchant retry logic turns one declined purchase into several rows in fct_payment_authorization. Collapse attempts into chains: inside a partition of (card_token_id, merchant_id, amount_minor), consecutive rows whose requested_at gap is 15 minutes or less belong to the same chain. Return one row per chain with chain_started_at, attempt_count, amount_minor, channel, and chain_outcome set to 'approved' when any attempt in the chain was approved. Then report a 7-day rolling dollar-weighted approval rate by channel over chains rather than attempts. Exclude is_reversal rows.
Approach
- In a CTE, take LAG(requested_at) OVER (PARTITION BY card_token_id, merchant_id, amount_minor ORDER BY requested_at) and set is_new_chain when the previous value is null or the gap exceeds 15 minutes.
- Turn the flag into a chain identifier with SUM(is_new_chain::int) OVER (same partition, same order, rows unbounded preceding to current row), which is the standard gaps-and-islands construction.
- Aggregate to one row per chain: MIN(requested_at), COUNT(*), and BOOL_OR(auth_result = 'approved') as the chain outcome, because the purchase succeeded if any attempt in the chain did.
- Roll the chains to a daily grain per channel, then apply the rolling window as PARTITION BY channel ORDER BY chain_date RANGE BETWEEN INTERVAL '6 days' PRECEDING AND CURRENT ROW. An interval-offset RANGE frame is value-based: it admits every row in the partition whose chain_date falls in the closed window [D - 6 days, D], so a channel with no chains on some dates still gets the right seven-day sums — sparsity is exactly what this construct tolerates. ROWS BETWEEN 6 PRECEDING AND CURRENT ROW is the one that needs a dense grain, because it counts rows and on a sparse grain reaches back further than seven days.
- Left-join a dense date spine only if the output needs a row on days with no chains. That is a presentation requirement, not a correctness one, and it leaves every rolling sum unchanged. The RANGE frame's preconditions are that chain_date is a date or timestamp (an interval offset needs an ordering column it can be added to) and that the aggregation left one row per (channel, chain_date).
- Divide approved chain value by total chain value inside the rolling frame, never the average of daily rates, since averaging rates weights a quiet day the same as a heavy one.
Worked solution 40 min
- CTE 1: filter out is_reversal rows, then compute prev_requested_at with LAG and the is_new_chain flag.
- CTE 2: build chain_id with a running SUM of the flag over the same partition and order.
- CTE 3: group by partition keys plus chain_id to emit chain_started_at, attempt_count, amount_minor, channel and chain_outcome.
- CTE 4: aggregate chains to (chain_date, channel) with approved value and total value. Add the date spine here only if the report must show empty days.
- Final SELECT: two rolling SUMs over PARTITION BY channel ORDER BY chain_date RANGE BETWEEN INTERVAL '6 days' PRECEDING AND CURRENT ROW, divided at the end.
Follow-up
- This definition chains off the previous attempt, so a chain can span an hour if attempts arrive every 14 minutes. When is that right, and when would you anchor the window to the first attempt instead?
- Two genuine purchases of the same amount at the same merchant, four minutes apart, collapse into one chain. How large is that error and how would you bound it?
- A channel goes dark for three days mid-window. Which of the two frame types would silently widen, and what would the resulting rate look like?
- What changes if the merchant retries with a slightly different amount to dodge a velocity rule?
How would you define the success metrics for a new digital banking fea…
How would you define the success metrics for a new digital banking feature?
Approach
- Name one primary metric, then the guardrail that stops it being gamed.
- Fix the population and the time window before naming any metric.
- Restate the decision this analysis has to support, and who acts on the answer.
Follow-up
- Which segment would you cut first, and what would that rule out?
- What would you do if the primary metric and the guardrail moved in opposite directions?
If we notice a sudden drop in a key product metric, what steps would y…
If we notice a sudden drop in a key product metric, what steps would you take to diagnose the cause?
Approach
- Fix the population and the time window before naming any metric.
- Restate the decision this analysis has to support, and who acts on the answer.
- State what result would change your recommendation, so the answer is falsifiable.
Follow-up
- What would you do if the primary metric and the guardrail moved in opposite directions?
- Which segment would you cut first, and what would that rule out?
How do you balance user experience with business-driven data collectio…
How do you balance user experience with business-driven data collection?
Approach
- Fix the population and the time window before naming any metric.
- Restate the decision this analysis has to support, and who acts on the answer.
- Name one primary metric, then the guardrail that stops it being gamed.
Follow-up
- How would you detect that the metric is being gamed rather than genuinely improving?
- Which segment would you cut first, and what would that rule out?
Design a metric to track the engagement of our mobile banking applicat…
Design a metric to track the engagement of our mobile banking application users.
Approach
- Decompose the metric into the rates that drive it, and say which one you would check first.
- Restate the decision this analysis has to support, and who acts on the answer.
- Name one primary metric, then the guardrail that stops it being gamed.
Follow-up
- How would you detect that the metric is being gamed rather than genuinely improving?
- What would you do if the primary metric and the guardrail moved in opposite directions?
What are the most common pitfalls you encounter when running A/B tests…
What are the most common pitfalls you encounter when running A/B tests?
Approach
- Say whether units interfere with each other, and switch design if they do.
- Name the guardrails that would stop a launch even on a positive primary result.
- Name the randomisation unit first; it decides the variance and what the test can detect.
Follow-up
- What would you do if you could not randomise at all?
- What would you conclude if the result is positive but the test is underpowered?
If an experiment result is contradictory to historical data, how do yo…
If an experiment result is contradictory to historical data, how do you proceed?
Approach
- Say whether units interfere with each other, and switch design if they do.
- State the primary metric and the minimum effect worth shipping, then size the test.
- Name the randomisation unit first; it decides the variance and what the test can detect.
Follow-up
- What would you do if you could not randomise at all?
- What would you conclude if the result is positive but the test is underpowered?
Success metrics for loosening a fraud decline threshold
A risk team proposes lowering the risk_score cutoff that produces auth_result = 'declined_risk_rule'. Settled volume per active customer is the north star; net fraud loss in basis points of settled volume is the guardrail. The two move in opposite directions by construction. Specify the readout: primary metric, guardrail, the maturity window each is read at, and the decision rule agreed before launch. Show the expected-cost arithmetic that sets the cutoff using an average ticket of 200 units, a 1.5 percent contribution margin, 35 percent recovery on fraud losses, and 12 units of downstream value lost per false decline.
Approach
- Refuse the two-metric framing and convert both sides into one currency. Approving a fraudulent transaction costs the amount net of recovery; declining a good one costs the forgone margin plus the downstream value of the customer's reaction. Decline when p times C_FN exceeds (1 minus p) times C_FP, so the break-even probability is p* = C_FP / (C_FP + C_FN).
- Put the numbers in. C_FN = 200 times (1 minus 0.35) = 130, C_FP = 200 times 0.015 plus 12 = 15, so p* = 15 / 145 = 10.3 percent. Then show the threshold is amount-dependent: at a 2,000 ticket C_FN = 1,300 and C_FP = 42, giving p* = 3.1 percent, so a single global cutoff is already the wrong shape before any tuning starts.
- State the precondition that makes this arithmetic legal: risk_score has to be calibrated, so that a score of 0.10 corresponds to an observed 10 percent fraud rate. A score that only ranks makes p* meaningless. Check the reliability curve before quoting any cutoff to anyone.
- Set the maturity windows separately. Volume is readable within days, fraud loss is not, so the guardrail is read only on transaction months with at least 120 days of dispute maturity and the decision stays open until then, or a leading indicator is agreed in advance with its bias written down.
- Agree the stopping rule before launch in the right units: revert if matured net fraud loss per unit of incremental settled volume exceeds the figure implied by p*. Fraud loss is supposed to rise when the cutoff loosens, so a rule that triggers on any rise is a rule that was never going to allow the change.
- Report the swap set rather than portfolio totals: the transactions the new cutoff approves that the old one declined, and their realised loss rate. Portfolio aggregates dilute the change into invisibility.
Worked solution 30 min
- Compute p* at ticket sizes of 50, 200 and 2,000 with the given margin, recovery and false-decline cost, and tabulate them.
- Bucket historical declined_risk_rule authorizations by risk_score decile and, for each bucket, write down what outcome data exists and what does not.
- Write the readout spec: primary metric, guardrail, the 120-day maturity rule, the swap-set table and the numeric stopping rule.
- Write the calibration precondition in two sentences and say how you would test it.
Follow-up
- Fraud loss in basis points falls after launch. Name two ways that happens without any improvement in decisioning.
- How do you keep observing outcomes in the region the rule still declines?
- What changes if the 12 units of downstream value is a guess with no evidence behind it?
Settled volume jumps after a new acceptance corridor launches
Settled payment volume per active customer rose 12 percent in the month a new acceptance corridor went live. The pipeline sums settlement_amount_minor from fct_payment_authorization and divides by 100 to get major units. Columns available: amount_minor, transaction_currency, captured_amount_minor, settlement_amount_minor, settlement_currency, settlement_fx_rate, settled_at, is_reversal, issuer_country, acquirer_country. Confirm or refute the 12 percent, and specify exactly the conversion the metric should be using.
Approach
- Split the month-over-month increase by settlement_currency. If one currency carries nearly all of it while its transaction count barely moved, the problem is arithmetic rather than demand, and that is a two-minute check.
- Look up each currency's ISO 4217 exponent. Dividing a three-decimal currency by 100 instead of 1000 overstates it tenfold; dividing a zero-decimal currency by 100 understates it hundredfold. Neither is a rounding issue.
- Rewrite the conversion to scale settlement_amount_minor by ten to the power of that currency's exponent, then convert to the reporting currency. Do not reuse settlement_fx_rate for this; it is the rate applied between transaction and settlement currency at settlement time, not a reporting-currency rate.
- Check the other half of the series too. settlement_amount_minor is denominated in settlement_currency while amount_minor is in transaction_currency, so any series that mixes the two is uninterpretable regardless of the exponent fix.
- Exclude reversals and refunds, recompute, then reconcile the corrected total to the settlement ledger for the same period and show the tie-out in the write-up.
- Recompute the per-customer denominator on the corrected month, since a new corridor adds customers as well as volume and the ratio can move either way once the numerator is right.
Follow-up
- Where else in the warehouse does a hardcoded divide-by-100 appear, and how would you find every instance?
- What test would fail the build the next time a currency with a different exponent is onboarded?
- The reporting-currency rate is itself a choice. Which rate, on which date, and why does finance care about the answer?
Four days spend equal time on query work, statistics, modelling and product judgement at deliberately shallow depth, which produces a scored map of where you actually stand. The last three days spend everything on the two areas the role weights most, and close by re-running day one to measure movement.
Prepare, practise & reflect
One practical outcome each day. Spend longer where you need it.
0 / 7 done01Breadth pass: query fluency
- Solve six prompts spanning aggregation, joins, window functions and date arithmetic in 60 minutes total, stopping at 10 minutes each whether or not it works, and mark every prompt as solved, solved slowly, or stuck.
- For each unsolved prompt write the single blocking sentence (I lost the grain, I did not know the frame clause, I could not express the date boundary) instead of reading the solution.
- Translate one pandas transformation you know well into SQL and one SQL query into pandas, checking that both return the same row count and the same totals.
Deliverable: A scored six-row table, one line per prompt, saved for the day-seven re-run.
Practice prompt ↗Practice prompt ↗Practice prompt ↗Worked solution ↗02Breadth pass: statistics and inference
- Answer ten short questions in writing with nothing open: what a p-value is conditional on, what a 95 percent interval covers across repeated samples, when a paired test is the right one, what the bootstrap estimates, why multiple comparisons inflate false positives, how controlling the family-wise error rate differs from controlling the false discovery rate, what power depends on, what a missed real effect costs a product, the three situations where the central limit theorem does not rescue you (small n, very heavy tails, dependent observations), and what a standard error is the standard deviation of.
- Grade yourself against a reference and count only the answers that were exactly right, not the ones that were nearly right.
- Rewrite the two weakest answers the following morning from memory in full sentences.
Deliverable: Ten graded answers with an honest count of exact hits.
Practice prompt ↗Practice prompt ↗Practice prompt ↗03Breadth pass: modelling
- Take one tabular dataset end to end in 90 minutes: a leakage-safe split, a baseline that is not a model (majority class or historical mean), one regularized linear model, one gradient-boosted tree, and a single evaluation metric chosen before you look at any result.
- Write why that metric fits the cost structure: precision at a fixed recall for alerting, calibration for anything feeding a price or a threshold, ranking metrics for retrieval, and note that area under the ROC curve is insensitive to class balance in a way that can flatter a rare-positive problem.
- Name the leak you were most likely to introduce (an encoding fit on all rows before splitting, or a feature computed after the label's timestamp) and write the check that would have caught it.
Deliverable: A notebook whose first cell states the metric and the baseline, plus two lines on what beat what and by how much.
Practice prompt ↗Practice prompt ↗Practice prompt ↗04Breadth pass: product judgement
- Answer three case prompts aloud at 15 minutes each, timing how long passes before you state a success metric.
- For one case write the first segmentation you would run and the row counts you expect per segment, so that a tiny segment cannot quietly drive the conclusion.
- Take a metric definition you did not write, from a public dashboard, a textbook, or documentation you already have open, and list every place two analysts implementing it would diverge: which rows the denominator admits, whether the unit is an account or a person, what the time window is anchored to, and what happens to data that arrives late. Then write the one question that would close the largest of those gaps.
Deliverable: Three recorded case answers plus an ambiguity list for a metric someone else defined, ending in the single question you would ask about it.
Practice prompt ↗Practice prompt ↗Worked solution ↗05Depth, first area
- Rank the four areas by how many bullet points in the role description each one covers, pick the top one, and spend the entire day inside it.
- Work the six hardest problems you can find in that area and for each write the generalizable move you should have reached for first, rather than the answer.
- Re-solve the two you failed the same evening with notes closed.
Deliverable: Six generalizable moves written as instructions to yourself, not as solutions.
Practice prompt ↗Practice prompt ↗06Depth, second area, and the seam between them
- Repeat the depth protocol on the second-ranked area with the same six-problem structure.
- Construct one problem that requires both areas at once, for example a metric redefinition whose effect you must validate with a test whose readout you then have to query.
- Solve your own combined problem end to end and note where the handoff between the two areas cost you time.
Deliverable: One combined problem, solved end to end, with the handoff failure written down.
Practice prompt ↗Practice prompt ↗07Integration and re-measurement
- Re-run the six prompts from day one under the same clock and compare both correctness and time.
- Run a 60-minute mixed mock that moves between areas without warning, since switching cost is what breadth passes do not train.
- Write the two areas you would still fail on, and the sentence you will use in the interview when you hit one of them.
Deliverable: A before-and-after score table plus a written plan for the two remaining gaps.
Practice prompt ↗Practice prompt ↗Worked solution ↗Expand any day for tasks and deliverables. Your progress is saved on this device.
Data people depend on systems owned by other teams, and much of the job is negotiating for instrumentation, access, or a fix to a broken pipeline. Prepare an example of getting something changed upstream that you did not control. Describe what you asked for, what you traded, and how you worked while you waited.
Tell me about a time you had to take on a project outside of your core…
Tell me about a time you had to take on a project outside of your core area of expertise.
Approach
- Quantify the outcome, including what you would not claim credit for.
- State the situation in two sentences and spend the rest on your reasoning.
- Pick a story where you drove the decision, not one where you observed it.
Follow-up
- What would you do differently if you ran that project again?
- What did you decide not to do, and why?
Disagree with a product manager over an approval-rate target
A product manager proposes a quarterly goal of raising card authorization approval rate by 150 basis points, measured as approved authorizations divided by all authorizations in fct_payment_authorization. You believe that metric can be hit with no customer benefit, because merchant retry chains, zero-amount verification authorizations, incremental authorizations and reversals all sit in the denominator, and declines skew toward high-value cross-border ecommerce. You support the underlying goal. In one working session, change the metric without killing the initiative, and name the guardrail you would accept.
Approach
- Separate the goal from the metric out loud and agree with the goal first, so the disagreement stays narrow and technical rather than becoming positional.
- Demonstrate the failure rather than asserting it: compute the proposed metric and the dollar-weighted collapsed version over the same recent window, and find a period where they moved in opposite directions.
- Propose the replacement precisely: sum of approved amount_minor over sum of attempted amount_minor, after collapsing retries to one attempt per card_token_id, merchant_id and amount_minor within a 15-minute window, excluding is_reversal rows and zero-amount verifications, with everything converted to one reporting currency before summing.
- Attach the guardrail that makes the target honest: matured first-chargeback rate and net fraud loss in basis points of settled volume, read only on transaction months carrying at least 120 days of maturity.
- Give the product manager something back: the replacement metric cuts cleanly by channel and issuer_country, which makes a roadmap of merchant-specific and authentication fixes legible in a way the blended rate never was.
Follow-up
- How do you identify a retry chain when the merchant varies the amount slightly between attempts?
- The product manager wants a weekly read on the guardrail. What is the earliest defensible signal, and how do you label it?
Allocate one analyst-week across three competing risk requests
Three requests land in the same week and you have one analyst-week. Payments wants a merchant-level decline teardown before a contract renewal in nine days. Credit wants a swap-set analysis on a cutoff change scheduled to ship in six weeks. Insurance wants accident-quarter loss ratios at 12 months development for a reserving review with no fixed date. Each sponsor believes theirs is first, and each has escalated before. Produce the allocation, the reasoning you would say out loud to all three at once, and what you explicitly drop.
Approach
- Score each request on the decision it unblocks rather than on effort or on how loudly it arrived: what changes if it is late, and is that change reversible.
- Separate deadline from value. The nine-day renewal is a hard, irreversible date with a bounded prize; the six-week cutoff has slack but a much larger downside if it ships unmeasured; the reserving number has no date but feeds external reporting, which is its own kind of hard.
- Hunt for the cheap partial in each: a decline teardown restricted to the top merchants by declined value usually answers the contract question at a fraction of the full cut.
- Sequence by hard date first, then by largest irreversible downside, and deliver the trade-off to all three sponsors in one message rather than three, so nobody negotiates privately against a version you told someone else.
- Name what is dropped and who now owns that consequence, in writing, so the trade-off is visible rather than silently absorbed by you.
Follow-up
- The credit sponsor escalates to your manager. What do you change, and what do you refuse to change?
- How would you make this allocation reproducible so the next contested week is a rule application rather than a negotiation?
- 01
Tell me about a time you had to take on a project outside of your core area of expertise.
- 02
A product manager proposes a quarterly goal of raising card authorization approval rate by 150 basis points, measured as approved authorizations divided by all authorizations in fct_payment_authorization. You believe that metric can be hit with no customer benefit, because merchant retry chains, zero-amount verification authorizations, incremental authorizations and reversals all sit in the denominator, and declines skew toward high-value cross-border ecommerce. You support the underlying goal. In one working session, change the metric without killing the initiative, and name the guardrail you would accept.
- 03
Three requests land in the same week and you have one analyst-week. Payments wants a merchant-level decline teardown before a contract renewal in nine days. Credit wants a swap-set analysis on a cutoff change scheduled to ship in six weeks. Insurance wants accident-quarter loss ratios at 12 months development for a reserving review with no fixed date. Each sponsor believes theirs is first, and each has escalated before. Produce the allocation, the reasoning you would say out loud to all three at once, and what you explicitly drop.
Is this an official ATB Financial interview guide?
No. It is PracHub's own research and practice material for the Data Scientist role at ATB Financial. Rounds and questions reflect what candidates have reported, not a process ATB Financial has published, and they change over time. Confirm the current format and scope with your recruiter.
PracHub interview research ↗How much time should I spend preparing for the technical rounds?
Dedicate at least 2–3 weeks to review your SQL and statistical foundations. Focus on practical applications rather than just theory, as the interviews are highly case-study oriented.
PracHub interview research ↗What is the most important trait for a candidate to demonstrate?
ATB Financial highly values curiosity and the ability to learn. Don't be afraid to admit when you don't know something; instead, explain how you would go about finding the answer.
PracHub interview research ↗How does the company handle remote work?
While processes vary by team, the organization is supportive of flexible work arrangements. Be sure to ask your recruiter about the specific team's expectations during your initial screen.
PracHub interview research ↗What differentiates an average candidate from a top-tier one?
The ability to connect technical work to business outcomes. A top-tier candidate doesn't just build a model; they explain how that model solves a specific problem and what the potential ROI is.
PracHub interview research ↗Sources & methodology 3 sources ↗
No official company page is cited. Rounds and questions come from candidate reports and PracHub editorial material; each source shows the date it was read.
- 01PracHub interview research ↗
PracHub editorial research into this company and role, maintained with this guide. Candidate-reported, not an employer publication.
PracHub page · Accessed 2026-09-22 - 02PracHub Data Scientist practice ↗
Cross-company practice questions for this role.
PracHub page · Accessed 2026-09-22 - 03PracHub interview preparation framework ↗
The framework the preparation plan follows.
PracHub page · Accessed 2026-09-22
Explore related engineering environments and compare the preparation focus.
1st Central Data Scientist Interview Questions & Guide 2026
Causal-inference exercises for 1st Central data scientist prep: difference-in-differences, matching, instrumental variables, and knowing when observational data simply cannot answer the question asked.
3M Data Scientist Interview Questions & Guide 2026
Communication practice for 3M data scientist candidates: turn an analysis into a recommendation, name the uncertainty honestly, and answer the follow-up a skeptical stakeholder will raise.
ValueLabs Data Scientist Interview Questions & Guide 2026
Causal-inference exercises for ValueLabs data scientist prep: difference-in-differences, matching, instrumental variables, and knowing when observational data simply cannot answer the question asked.
vConstruct Data Scientist Interview Questions & Guide 2026
Communication practice for vConstruct data scientist candidates: turn an analysis into a recommendation, name the uncertainty honestly, and answer the follow-up a skeptical stakeholder will raise.