A Data Scientist at AUTO1 Group occupies a central position in the company's mission to digitize the European used-car market. By leveraging massive datasets generated from car valuations, auctions, and logistics, you will build models that drive pricing accuracy, demand forecasting, and operational efficiency. Your work directly impacts how the business scales, as you translate raw automotive data into actionable insights that optimize the lifecycle of millions of vehicles.
This role is highly product-focused and data-intensive. You will collaborate with engineering and product teams to integrate machine learning solutions directly into the platform, ensuring that the company maintains its competitive edge in a fast-paced, high-volume industry. Whether you are improving recommendation engines for B2B buyers or refining valuation models for incoming inventory, your contributions are instrumental in shaping the technological backbone of AUTO1 Group.
HR Screening
reportedA screening call is a matching exercise run by someone who will not evaluate your statistics. They are checking that the work described on your resume is work you personally did, and that its scope matches the level the role is written for. Logistics get settled in the same half hour so nobody spends an interviewer's afternoon on a mismatch. The answer that fails is the one narrated in the plural. If every sentence is 'we built' and 'the team decided', there is nothing specific to write down about you. Name the piece that was yours, the decision you made inside it, and what changed after.
What to demonstrate
- Whether the ownership implied by your resume survives one round of follow-up about who actually did which part
- Whether your described scope (data size, stakeholders, what shipped) matches the seniority the role is written at
- Whether timeline, location and compensation expectations make the rest of the loop worth scheduling
How to prepare
- Rewrite your top three resume bullets in the first person singular, each with the decision you made and what moved afterwards, then say them out loud once so the 'we' does not return under pressure
- Attach one number to each project: the baseline, the change, and the window it was measured over. Where impact was never measured, say that plainly rather than inventing a figure
- Settle your compensation range before the call and give it as a range with a reason behind it, such as current total comp or a competing timeline, instead of deflecting the question twice
Technical Assessment
reportedBefore anything else, this round is a reading test. You are given a small schema and a question phrased in business language, and most of the difficulty sits in the gap between them. Who counts as an active user, does a refunded order still count as an order, is that date column an event time or a load time. Weak answers start typing immediately and compute something precise about the wrong population. Strong ones pin the definition in one sentence, name the column that encodes it, then write the query. On a timed assessment with nobody to tell, write the definition in a comment anyway.
What to demonstrate
- Whether an ambiguous term becomes a specific column and filter before any computation happens
- Whether you read the schema for keys and cardinality rather than only for column names
- Whether the result answers the question at the grain it was asked at, per user or per session or per day
How to prepare
- Take three metrics you already use and write down the exact filter and exact grain behind each, then practise stating one of them in a single sentence out loud
- On a schema you have never seen, spend the first minute writing what one row of each table means and which key it is unique on, then predict which joins can duplicate rows
- Rehearse a version where the definition changes halfway through, and edit the query you have instead of starting over
Final Deep-Dive Session
reportedA day of back-to-back interviews samples your floor, not your ceiling. Four hours in, the habits that carry a good answer are the first to go: restating the question before solving it, asking what the data would have to look like, checking a number before quoting it. What the day decides is whether the tired version of you is still someone to leave alone with an ambiguous problem. The round that sinks a candidate is usually not the hardest one. It is the one immediately after the round that went badly.
What to demonstrate
- Whether the late rounds get the same clarifying questions as the first one, or whether you start answering immediately to save effort
- Whether a weak answer stays in the room it happened in, instead of following you into the next conversation as apology or distraction
- Whether the quality of your questions holds up, since fatigue removes curiosity about the problem before it removes knowledge of the method
How to prepare
- Rehearse the length, not just the content: book four mock interviews of different types in one afternoon with short gaps, because the one you need to observe is the fourth
- Put the two or three questions you ask at the start of any problem on a card in front of you, so that under fatigue it is a habit you run rather than a decision you make
- Decide in advance what the gap between rooms is for: water, one line of notes on anything you promised to follow up, and an explicit close on the round that just ended so it does not travel
- Prepare a different closing question for each interviewer, so the end of a long day does not produce the same one four times
PracHub editorial advice for the preparation topics above.
Assuming a model is fair because protected attributes are not among its inputs
Postcode, device, tenure, income proxies and even transaction patterns correlate with protected characteristics, so a model can produce a disparate outcome without ever reading the attribute. Credit decisions additionally carry an explainability obligation in many jurisdictions, since a denial has to be accompanied by its principal reasons, which constrains model form and feature engineering rather than being a reporting afterthought. Treating fairness testing and reason-code generation as design constraints from the first model version is far cheaper than retrofitting them to a deployed one.
Counting authorizations instead of weighting them, and summing amounts across currencies
Declines skew toward high-value, cross-border and card-not-present transactions, so an unweighted approval rate can sit flat while approved value falls. Merchant retry logic also turns one declined purchase into several rows, inflating the denominator by an amount that varies by merchant and by decline reason. Amounts are held in the minor unit of the transaction currency and that unit is not always two decimals, since some currencies have none and some have three, so summing amount_minor across currencies produces a figure with no interpretation at all.
Generalising beyond the population the sample actually supports
State the frame the sample was drawn from and where it diverges from the population you want to talk about: time window, platform, geography, opt-in. If a group is excluded from the frame, either weight to known margins or narrow the claim rather than quietly extending it.
Optimising accuracy on a heavily imbalanced target
State the base rate first, then choose the metric from the relative cost of a false positive against a false negative: precision and recall at the operating threshold, PR-AUC, or expected cost. At a 1 percent positive rate, predicting the majority class for everyone scores 99 percent accuracy and is worthless.
Choose a category, try a prompt, then open its approach, worked solution or follow-up when you need it.
How do you balance the trade-off between model precision and recall in…
How do you balance the trade-off between model precision and recall in a pricing application?
Approach
- Set a baseline first, so any model has something honest to beat.
- Frame the prediction: the label, the moment of prediction, and the action it triggers.
- Check what information would not exist at prediction time, and exclude it.
Follow-up
- Where could label leakage enter this setup?
- What would you monitor after launch to know the model is still valid?
Build a vintage delinquency table without pivot or unstack
fct_loan_performance_monthly gives loan_id, origination_month, months_on_book, days_past_due, charge_off_flag and restructured_flag. Produce a DataFrame with one row per origination_month and columns for months_on_book 0 through 12, each cell holding the share of that vintage's funded loans that had ever reached 90 or more days past due, or charge-off, by that age. You may not use pivot, pivot_table, crosstab or unstack. Cells for ages a cohort has not yet reached must be NaN rather than zero.
Approach
- Define the per-row indicator as days_past_due >= 90 or charge_off_flag, then take a cumulative maximum of it per loan ordered by months_on_book, because the metric is reached-by-age-m, not in-that-state-at-age-m.
- Deal with restructuring before the cumulative max. Restructuring resets days_past_due, so a restructured loan re-enters at current and, without the cumulative maximum carrying its pre-restructure worst state, reads as a cure.
- Fix the denominator once as the count of distinct loan_id per origination_month across the whole cohort. Prepaid and charged-off loans stop producing rows, so a denominator recomputed at each age silently shrinks exactly where losses land.
- Aggregate with groupby(['origination_month','months_on_book'])['ever_90'].sum(), then pre-build the output frame indexed by sorted origination months with integer columns 0 to 12 and assign from the grouped Series by .loc on its index.
- Mask cells beyond each cohort's maximum observed months_on_book so an immature cell reads NaN instead of an artificially low rate.
Follow-up
- Two adjacent vintages diverge at months_on_book 6. How would you separate seasoning, mix shift and a genuine credit-quality change?
- The three most recent vintages look best on this table. What do you check before saying so?
- How does the table change if charge-off policy moved from 180 to 120 days past due partway through the series?
Bootstrap a fraud loss rate that clusters within merchant
You have a per-transaction frame with auth_id, merchant_id, settled_amount_reporting and net_loss_reporting, both already in one reporting currency. Most rows carry zero loss, a few carry large ones, and losses cluster within merchant. Using only numpy's random generator and no resampling helper from any library, write a bootstrap that returns a 95 percent interval for net fraud loss in basis points of settled volume, resampling merchants with replacement and taking all rows belonging to each drawn merchant. Also produce the naive row-level interval and state which you would report.
Approach
- State the estimator before writing it: total net loss divided by total settled volume, times 10,000. It is a ratio of sums, so each replicate recomputes both sums. Averaging per-transaction loss rates instead would weight a five-unit transaction like a five-thousand-unit one.
- Pre-aggregate loss and volume to merchant level once. For a ratio of sums, drawing merchants and taking all their rows is arithmetically identical to drawing merchant-level (loss_sum, volume_sum) pairs, so a replicate becomes one integer draw plus two vectorised sums rather than a groupby inside the loop.
- Draw B replicates of M merchant indices with replacement, where M is the observed merchant count, compute the ratio per replicate, and take the 2.5th and 97.5th percentiles. Say explicitly that this is a percentile interval and that BCa would correct the skew-induced bias if the decision is close.
- Repeat with independent row draws for the naive interval and compare widths on the same replicate count.
- Report the clustered interval. Rows within a merchant share an acceptance profile, a category code and a fraud exposure, so they are not independent, and the row-level interval understates variance by roughly the design effect.
Worked solution 30 min
- Compute the point estimate directly on the full data and keep it for comparison.
- Aggregate to merchant-level loss and volume arrays, record M, and set B to 2,000 with a seeded numpy Generator.
- In a vectorised loop, draw integer indices of shape (B, M), index both arrays, sum along axis 1, and take the ratio times 10,000.
- Repeat for the row-level version using the per-transaction arrays and N draws.
- Take the 2.5 and 97.5 percentiles of each replicate array and report both intervals alongside the point estimate.
Follow-up
- Your clustered interval is three times wider. How do you explain that to someone who wanted a tighter number?
- One merchant accounts for 40 percent of losses. What does that do to the interval, and what would you do about it?
- How does this change if the question is whether two months differ rather than what this month's rate is?
Write a query using SQL window functions to calculate the moving avera…
Write a query using SQL window functions to calculate the moving average of car prices over the last 30 days.
Approach
- State the window function and its partition and ordering out loud before writing it.
- Check whether any join is one-to-many before aggregating, or the sums inflate.
- Say which table is the grain you start from, and join outward from it.
Follow-up
- How would you verify this result without re-running the same query?
- How does the query change if the join becomes one-to-many?
How would you join multiple tables to track the lifecycle of a car fro…
How would you join multiple tables to track the lifecycle of a car from acquisition to sale?
Approach
- Compute rates by summing numerator and denominator separately, never by averaging rates.
- Say which table is the grain you start from, and join outward from it.
- State the window function and its partition and ordering out loud before writing it.
Follow-up
- What breaks if events arrive late or out of order?
- How would you verify this result without re-running the same query?
Accident-quarter loss ratio on earned rather than written premium
From fct_policy_period_monthly, compute the accident-quarter loss ratio by product_line: incurred losses, being paid_loss_minor plus case_reserve_minor plus ibnr_reserve_minor, over earned_premium_minor for the same accident quarter. State explicitly whether loss_adjustment_expense_minor is included and apply that choice consistently. Also output the same ratio computed on written_premium_minor so the two can be compared. The table holds current values with no valuation-date snapshot. Say in one line which comparison this schema cannot support and what you would need to support it.
Approach
- Derive the accident quarter from as_of_month with date_trunc, and note that the table already attributes losses to the month of the loss event while earning premium pro rata into the same month, which is what makes the two sides comparable at all.
- Aggregate earned_premium_minor, written_premium_minor and the three loss components to product_line and accident quarter in one pass, keeping loss adjustment expense as its own column so the inclusion choice is a final-select decision rather than something buried in a CTE.
- Compute both ratios side by side and a third column for their difference, because the size and sign of that difference is a direct read on whether the book grew or shrank in the quarter.
- State the limitation plainly: every row carries today's reserve estimate, so each accident quarter is observed at a different development age and a cross-quarter comparison mixes development with underwriting. A fixed development age needs a valuation-date dimension, that is one row per accident period per valuation, which this table does not have.
- Guard against the mirror-image error on the numerator by confirming ibnr_reserve_minor is non-zero on recent quarters; if it is null or zero there, the recent periods are understated twice over and the series is not usable.
Worked solution 40 min
- CTE quarterly: group fct_policy_period_monthly by product_line and date_trunc('quarter', as_of_month), summing earned_premium_minor, written_premium_minor, paid_loss_minor, case_reserve_minor, ibnr_reserve_minor and loss_adjustment_expense_minor.
- Final SELECT: build incurred_minor as the three loss components plus the LAE column, with the LAE inclusion written as a named expression so the choice is visible on the page.
- Emit loss_ratio_earned and loss_ratio_written, both cast to numeric, plus their difference and the written-to-earned premium ratio.
- Order by product_line and accident quarter, and append the one-line note about the missing valuation dimension to the query as a comment.
Follow-up
- Written premium exceeds earned premium by 18 percent this quarter and by 3 percent two years ago. What happened to the book, and what does it do to each ratio?
- How would you build a development triangle from a valuation-dated version of this table, and what would you use the chain-ladder factors for?
- Statutory presentation conventionally takes the expense ratio on written premium while the loss ratio uses earned. How do you avoid a combined ratio that quietly mixes the two bases?
How would you design a metric to measure the success of a new car valu…
How would you design a metric to measure the success of a new car valuation feature?
Approach
- Name one primary metric, then the guardrail that stops it being gamed.
- Restate the decision this analysis has to support, and who acts on the answer.
- Decompose the metric into the rates that drive it, and say which one you would check first.
Follow-up
- What would you do if the primary metric and the guardrail moved in opposite directions?
- Which segment would you cut first, and what would that rule out?
Explain the difference between statistical significance and practical …
Explain the difference between statistical significance and practical significance in an A/B test.
Approach
- Decide the analysis before seeing data, including how long it runs and when you look.
- Say whether units interfere with each other, and switch design if they do.
- Name the randomisation unit first; it decides the variance and what the test can detect.
Follow-up
- How would you handle interference between treated and control units?
- What would you conclude if the result is positive but the test is underpowered?
How do you determine the required sample size for an experiment involv…
How do you determine the required sample size for an experiment involving a low-volume car segment?
Approach
- Say whether units interfere with each other, and switch design if they do.
- State the primary metric and the minimum effect worth shipping, then size the test.
- Name the randomisation unit first; it decides the variance and what the test can detect.
Follow-up
- How would you handle interference between treated and control units?
- What would you do if you could not randomise at all?
What are the most common experimentation pitfalls you have encountered…
What are the most common experimentation pitfalls you have encountered when testing new pricing strategies?
Approach
- Decide the analysis before seeing data, including how long it runs and when you look.
- Name the randomisation unit first; it decides the variance and what the test can detect.
- State the primary metric and the minimum effect worth shipping, then size the test.
Follow-up
- What would you do if you could not randomise at all?
- How would you handle interference between treated and control units?
How would you approach building an automated system to analyze car sta…
How would you approach building an automated system to analyze car status from images?
Approach
- Say what you would check first and why it is the highest-information step.
- State your assumptions explicitly before working the problem.
- Clarify what is being asked and what a complete answer would contain.
Follow-up
- How would you know your answer was wrong?
- What assumption would you test first?
Design an authorization approval rate a team cannot game
A payments team is given authorization approval rate as its quarterly target, defined as approved authorizations over all authorizations in fct_payment_authorization. Using auth_id, card_token_id, merchant_id, amount_minor, transaction_currency, auth_result, is_reversal, parent_auth_id, channel, issuer_country and requested_at, list three ways the team can raise that number without a single additional customer purchase succeeding. Then write the definition you would put on the dashboard instead, with its exclusions, and name the one guardrail you would always read beside it.
Approach
- Enumerate the rows in the table that are not purchases: zero-amount account verifications, reversals (is_reversal = true), incremental authorizations (parent_auth_id not null) and merchant retries of a declined attempt. Each is a lever on the numerator or the denominator that no customer would ever notice.
- Name the mix levers. Recurring and card-present traffic approve at higher rates than ecommerce and cross-border, so routing changes or a marketing push into an easy channel move the blended rate with no change in decisioning quality at all.
- Work the retry arithmetic rather than asserting it. A declined purchase that is retried three times and succeeds on the fourth contributes one approval and four denominator rows, which is below a healthy blended rate, so suppressing retries raises the published number while some purchases that would have succeeded on a retry now simply fail.
- Replace the definition: dollar-weighted, retry chains collapsed to a single attempt per (card_token_id, merchant_id, amount_minor) within a 15-minute window, excluding reversals, zero-amount verifications and incremental authorizations, with all amounts converted into one reporting currency before summing because amount_minor is in the minor unit of transaction_currency and that unit is not always two decimals. Cut by channel and issuer_country so mix shift shows up as mix shift.
- Guardrail: net fraud loss in basis points of settled volume, read only on transaction months with at least 120 days of dispute maturity. The fastest way to approve more is to decline less risk, and that bill arrives two to four months later.
Worked solution 25 min
- Compute the naive rate for one week: approved rows over all rows.
- Apply the exclusions one at a time (zero-amount, is_reversal, parent_auth_id not null), recording the rate after each, so you can say what each row type was worth to the headline number.
- Add a retry-collapsing CTE keyed on (card_token_id, merchant_id, amount_minor) over a 15-minute window, keeping the last attempt in each chain, and recompute.
- Recompute dollar-weighted in a single reporting currency, then split by channel and issuer_country.
- Write the final one-line definition with its exclusions, plus the guardrail sentence.
Follow-up
- The blended rate is flat but ecommerce cross-border fell 200 basis points. How do you present that?
- Why weight by amount rather than by count, and when does the weighted version mislead?
- Your 15-minute retry window merges two genuine purchases of the same amount at the same merchant. How would you bound that error?
Approval rate fell but approved value did not
Over ten days the count-weighted 7-day approval rate on fct_payment_authorization fell from 91 to 86 percent, while captured value in the reporting currency is flat. Available columns: auth_id, card_token_id, merchant_id, mcc, channel, requested_at, amount_minor, transaction_currency, auth_result, decline_reason_code, risk_score, is_reversal, parent_auth_id, captured_at, captured_amount_minor, issuer_country. In twenty minutes, decide whether approved value is actually at risk, and hand back a corrected rate together with its denominator and every exclusion written down.
Approach
- Restate the denominator before querying anything. The current one counts every row, so reversals (is_reversal = true), incremental authorizations (parent_auth_id not null) and zero-amount verification attempts (amount_minor = 0) are all sitting in it.
- Chart numerator and denominator separately by day. If approved counts are flat and total attempts rose, the rate moved because the denominator grew, which is a different investigation from a rule change and points at a different owner.
- Group declines by decline_reason_code and merchant_id. Retry-driven inflation concentrates in a few soft decline codes at a few merchants; a genuine policy change spreads across merchants within one code family.
- Collapse retry chains: partition by (card_token_id, merchant_id, amount_minor), keep one attempt per 15-minute window taking the best outcome, and recompute both count-weighted and dollar-weighted rates on the collapsed set.
- Convert amount_minor to one reporting currency using each currency's ISO 4217 exponent before any dollar weighting, then cut by channel and issuer_country to confirm nothing is hiding underneath a flat total.
- Report both rates side by side with the exclusion list attached, and state which definition the alert should have been built on.
Follow-up
- How would you pick the retry-collapsing window when merchants retry on different schedules?
- Flat captured value could itself be hiding a mix shift. How do you rule that out?
- What monitor would have caught denominator inflation on the day it started, rather than ten days later?
For a candidate whose interviews will centre on A/B testing, metric movement and causal claims. Design comes before arithmetic, arithmetic before analysis, and the week ends by rehearsing the readout rather than the derivation.
Prepare, practise & reflect
One practical outcome each day. Spend longer where you need it.
0 / 7 done01Design one test end to end on paper
- Take a single feature change and write the full design: randomization unit, the exact point of exposure, the primary metric with its grain, guardrails, allocation, planned duration, and the decision rule committed before any data exists.
- Write why the randomization unit must sit at or above the level where treatment can spill over, and give one case where user-level randomization is still contaminated (shared accounts or devices, or two participants in the same marketplace).
- State in advance what you will do if the primary metric is flat while a secondary metric is significant.
Deliverable: A one-page test design with a decision rule written before launch.
Practice prompt ↗Practice prompt ↗Practice prompt ↗Worked solution ↗02Power arithmetic until it is automatic
- Compute required sample size per arm for a binary metric with the normal approximation, n is approximately 2 times (z for alpha/2 plus z for power) squared times p(1 minus p) divided by delta squared, for baselines of 2, 10 and 40 percent at a 5 percent relative lift, and note that for a fixed relative lift the requirement falls as the baseline rises because delta grows proportionally with p.
- Redo the calculation for a continuous metric using variance in place of p(1 minus p), and show why a heavy-tailed quantity such as revenue per user needs either far more traffic or a capped version with a stated cap.
- Convert one of the results into weeks given a weekly eligible traffic figure, then list the two honest ways to shorten it (accept a larger detectable effect, or reduce variance) and write why quietly lowering the power target is a decision to miss more real wins, not a speedup.
Deliverable: A small script or sheet that maps baseline, minimum detectable effect, alpha and power to sample size and weeks, cross-checked against a published calculator.
Practice prompt ↗Practice prompt ↗Practice prompt ↗03Variance and the unit-of-analysis problem
- Take a ratio metric whose denominator is not the randomization unit (clicks per session, randomized by user) and compute the standard error twice, once naively at session level and once by the delta method or a user-level bootstrap, then record how much the naive version understates it.
- Implement CUPED on simulated data: choose a pre-period covariate X measured before assignment, estimate theta as Cov(Y, X) divided by Var(X), and analyse Y minus theta times (X minus its mean) in place of Y. Confirm the variance of the adjusted outcome equals the raw variance multiplied by one minus the squared correlation between Y and X, so a correlation of 0.45 removes about 20 percent of the variance and not 80.
- Now run that simulation a few hundred times and confirm the adjusted effect estimate is unbiased for the same effect rather than numerically identical to the raw one. Within any single run the two differ, sometimes by a large fraction of the true effect, because the two arms' pre-period covariate means never coincide exactly in a finite sample; they agree in expectation, which is the property that matters and the one to state out loud.
Deliverable: A notebook showing the adjusted estimator with a measurably smaller variance than the raw one, plus a repeated-simulation table showing the two estimators agreeing on average while differing run by run.
Practice prompt ↗Practice prompt ↗04Validity threats you can actually test for
- Run a sample ratio mismatch check as a chi-square goodness-of-fit test against the intended allocation, and write the three causes you would chase first (assignment logged before exposure, an arm-specific redirect or load failure, bot filtering applied asymmetrically).
- Simulate peeking: generate A/A data, test daily at alpha 0.05 across 14 looks, record the inflated false positive rate, then apply an alpha-spending boundary or commit to a fixed horizon and confirm the rate returns to nominal.
- Write how you would separate a novelty effect from a durable lift using the treatment effect plotted against days since first exposure, and what shape would change your recommendation.
Deliverable: One table showing the peeking false positive rate before and after correction, plus a written SRM triage list.
Practice prompt ↗Practice prompt ↗Worked solution ↗05When randomization is not available
- Write the identifying assumption for difference-in-differences (parallel trends in the absence of treatment), then plot pre-period trends for two candidate control groups and justify rejecting one of them.
- Design a switchback test for a change where user-level randomization would leak across participants, choosing a time-block length against the carryover you expect and saying how you would detect carryover in the data.
- List what an interrupted time series or a synthetic control buys you and the one thing neither can rule out: an unobserved shock that coincides with the launch.
Deliverable: A one-page memo recommending a single quasi-experimental design and naming its weakest assumption explicitly.
Practice prompt ↗Practice prompt ↗06The readout query
- Write the assignment-to-exposure join that returns exactly one row per unit per experiment, and handle units appearing in both arms by excluding and counting them rather than silently keeping one.
- Compute the per-arm metric, its variance and the relative lift with a confidence interval in SQL, then reproduce the identical numbers in a notebook as a cross-check.
- Add a segment breakdown and write the sentence that keeps it from being p-hacking: segments declared in advance, everything else reported as exploratory and corrected for multiplicity.
Deliverable: A single query that outputs the full readout table, matched to a notebook recomputation.
Practice prompt ↗Practice prompt ↗07Present it to someone who will not read the appendix
- Give a 10-minute readout of a real or simulated experiment in the order decision, number, uncertainty, caveat.
- Have your listener ask "can we ship it" in the case where the primary is flat and a guardrail moved, and answer with a recommendation rather than a request for more data.
- Rewrite your opening line so the recommendation lands before any methodology.
Deliverable: A one-page readout whose first line is the recommendation.
Practice prompt ↗Practice prompt ↗Worked solution ↗Expand any day for tasks and deliverables. Your progress is saved on this device.
Sometimes the honest read is that the initiative did not work, and the person who commissioned the analysis was hoping otherwise. Interviewers want to know whether you softened it. Prepare the case where you delivered an unwelcome result, how you presented the uncertainty without hiding behind it, and what the team did next.
How do you handle missing values or outliers in a large-scale automoti…
How do you handle missing values or outliers in a large-scale automotive dataset?
Approach
- Pick a story where you drove the decision, not one where you observed it.
- State the situation in two sentences and spend the rest on your reasoning.
- Name the disagreement or constraint, and how you resolved it with evidence.
Follow-up
- What would you do differently if you ran that project again?
- How did you know the outcome was caused by your change?
Allocate one analyst-week across three competing risk requests
Three requests land in the same week and you have one analyst-week. Payments wants a merchant-level decline teardown before a contract renewal in nine days. Credit wants a swap-set analysis on a cutoff change scheduled to ship in six weeks. Insurance wants accident-quarter loss ratios at 12 months development for a reserving review with no fixed date. Each sponsor believes theirs is first, and each has escalated before. Produce the allocation, the reasoning you would say out loud to all three at once, and what you explicitly drop.
Approach
- Score each request on the decision it unblocks rather than on effort or on how loudly it arrived: what changes if it is late, and is that change reversible.
- Separate deadline from value. The nine-day renewal is a hard, irreversible date with a bounded prize; the six-week cutoff has slack but a much larger downside if it ships unmeasured; the reserving number has no date but feeds external reporting, which is its own kind of hard.
- Hunt for the cheap partial in each: a decline teardown restricted to the top merchants by declined value usually answers the contract question at a fraction of the full cut.
- Sequence by hard date first, then by largest irreversible downside, and deliver the trade-off to all three sponsors in one message rather than three, so nobody negotiates privately against a version you told someone else.
- Name what is dropped and who now owns that consequence, in writing, so the trade-off is visible rather than silently absorbed by you.
Follow-up
- The credit sponsor escalates to your manager. What do you change, and what do you refuse to change?
- How would you make this allocation reproducible so the next contested week is a rule application rather than a negotiation?
Defend a vintage finding that contradicts the portfolio dashboard
The lending dashboard shows blended 90-plus days-past-due falling for four consecutive quarters while originations grew 60 percent. Using fct_loan_performance_monthly, you build a vintage view keyed on origination_month by months_on_book and find the three most recent vintages are worse than their predecessors at the same age. The business lead presents that dashboard weekly and pushes back hard, suggesting you picked favourable cohorts. You get one meeting and the vintage table. Present the finding so it survives the cherry-picking objection and ends in a decision.
Approach
- Reconcile before you contradict: show that aggregating your vintage table along the calendar diagonal reproduces the published blended series, so the disagreement is about age mix rather than about data quality.
- Make the mechanism arithmetic rather than rhetorical: a loan cannot reach 90 days past due before it is 90 days old, so rapid origination growth shifts weight onto young months-on-book where the rate is structurally near zero.
- Show every vintage rather than a selected pair, all indexed at months_on_book equal to 12, with cohort sizes printed beside each curve so nobody can claim the divergence rests on a thin cohort.
- Handle restructuring explicitly, because restructured_flag resets days_past_due: count each loan on its worst pre-restructure state, or recent vintages will look better than they are.
- Close on the decision rather than the chart: state what the divergence implies for the cutoff or the channel mix, and state in advance what evidence would make you withdraw the claim.
Follow-up
- Two cohorts differ at month 12. How do you separate a seasoning effect from a genuine credit-quality effect?
- Someone argues the recent vintages are simply a broker-channel mix shift. How do you test that, and what would confirm it?
- 01
How do you handle missing values or outliers in a large-scale automotive dataset?
- 02
Three requests land in the same week and you have one analyst-week. Payments wants a merchant-level decline teardown before a contract renewal in nine days. Credit wants a swap-set analysis on a cutoff change scheduled to ship in six weeks. Insurance wants accident-quarter loss ratios at 12 months development for a reserving review with no fixed date. Each sponsor believes theirs is first, and each has escalated before. Produce the allocation, the reasoning you would say out loud to all three at once, and what you explicitly drop.
- 03
The lending dashboard shows blended 90-plus days-past-due falling for four consecutive quarters while originations grew 60 percent. Using fct_loan_performance_monthly, you build a vintage view keyed on origination_month by months_on_book and find the three most recent vintages are worse than their predecessors at the same age. The business lead presents that dashboard weekly and pushes back hard, suggesting you picked favourable cohorts. You get one meeting and the vintage table. Present the finding so it survives the cherry-picking objection and ends in a decision.
Is this an official AUTO1 Group interview guide?
No. It is PracHub's own research and practice material for the Data Scientist role at AUTO1 Group. Rounds and questions reflect what candidates have reported, not a process AUTO1 Group has published, and they change over time. Confirm the current format and scope with your recruiter.
PracHub interview research ↗How much should I focus on domain knowledge of the car industry?
It is highly beneficial. Understanding the lifecycle of a used car—from acquisition to inspection to sale—will help you frame your technical answers in a business context, which is exactly what interviewers look for.
PracHub interview research ↗What is the best way to prepare for the case study round?
Practice structuring your thoughts out loud. Use a framework like the CIRCLES method to define the objective, the users, and the metrics before proposing a technical solution.
PracHub interview research ↗Are there specific technical tools I should master?
Focus on Python and SQL. You don't need to be a software engineer, but you must be able to write clean, efficient code that can be integrated into production systems.
PracHub interview research ↗What differentiates successful candidates?
Successful candidates don't just solve the technical problem—they ask the right questions about the business context, risks, and potential pitfalls of their proposed solution.
PracHub interview research ↗Sources & methodology 3 sources ↗
No official company page is cited. Rounds and questions come from candidate reports and PracHub editorial material; each source shows the date it was read.
- 01PracHub interview research ↗
PracHub editorial research into this company and role, maintained with this guide. Candidate-reported, not an employer publication.
PracHub page · Accessed 2026-09-22 - 02PracHub Data Scientist practice ↗
Cross-company practice questions for this role.
PracHub page · Accessed 2026-09-22 - 03PracHub interview preparation framework ↗
The framework the preparation plan follows.
PracHub page · Accessed 2026-09-22
Explore related engineering environments and compare the preparation focus.
1st Central Data Scientist Interview Questions & Guide 2026
Causal-inference exercises for 1st Central data scientist prep: difference-in-differences, matching, instrumental variables, and knowing when observational data simply cannot answer the question asked.
3M Data Scientist Interview Questions & Guide 2026
Communication practice for 3M data scientist candidates: turn an analysis into a recommendation, name the uncertainty honestly, and answer the follow-up a skeptical stakeholder will raise.
ValueLabs Data Scientist Interview Questions & Guide 2026
Causal-inference exercises for ValueLabs data scientist prep: difference-in-differences, matching, instrumental variables, and knowing when observational data simply cannot answer the question asked.
vConstruct Data Scientist Interview Questions & Guide 2026
Communication practice for vConstruct data scientist candidates: turn an analysis into a recommendation, name the uncertainty honestly, and answer the follow-up a skeptical stakeholder will raise.