Axi · Software Engineer
Updated · 2026-09-24

Axi Software Engineer
Interview Questions & Guide 2026

THE 60-SECOND BRIEF

As a Software Engineer at Axi, you play a foundational role in building and maintaining the high-performance systems that power Axi's global trading infrastructure. This position is critical to Axi's business, as the reliability, security, and scalability of its platforms directly impact the experience of its traders and the integrity of its financial services. You will contribute to complex technical problem spaces, ranging from core backend service architecture to user-facing frontend applications.

Seniority moves the scope further than the words in the title do. An earlier-career loop mostly checks that you implement something correctly and can reason about its cost, while a senior loop checks that you can pick between two defensible designs and say what you gave up.

Axi candidates report 4 rounds · ≈ 3-5 weeks. The stages below are what candidates describe, not a published process.

Detect concurrent edits instead of losing writesPaginate large result sets with keyset cursorsTrace a symptom to a mechanism under load

35 min read

Browse Software Engineer questions

See the practice prompts

12Practice promptsAcross five skill areas
3With worked solutionsIncluded in the practice prompts

As a Software Engineer at Axi, you play a foundational role in building and maintaining the high-performance systems that power Axi's global trading infrastructure. This position is critical to Axi's business, as the reliability, security, and scalability of its platforms directly impact the experience of its traders and the integrity of its financial services. You will contribute to complex technical problem spaces, ranging from core backend service architecture to user-facing frontend applications.

You can expect a role that demands both technical depth and a pragmatic approach to problem-solving. Whether you are optimizing low-latency systems or enhancing user interfaces, your work will directly influence Axi's product roadmap. Candidates report that Axi values engineers who are not only technically proficient but also capable of navigating the fast-paced nature of the financial technology sector with agility and precision.

The environment at Axi is fast-paced and results-oriented. Success in this role requires a balance of technical rigor and the ability to communicate your architectural decisions clearly to stakeholders.

01

Talent Acquisition Conversation

reported

You cannot drill a format you do not know, so put the preparation into material that travels. Three pieces of your own work, each rehearsed until you can take a follow-up you did not anticipate, will carry a conversation or a code walkthrough equally well. Specificity is what separates that from filler. A number needs its definition before it means anything: a p99 is over some window and measured at some hop, and a server-side figure excludes the queueing and network time a client would see. The number you cannot qualify is the one to leave out.

What to demonstrate

  • Whether your examples carry detail only someone who did the work would hold, such as what the binding constraint actually was, which alternative you rejected and why it was worse, and what you measured on each side of the change
  • Whether a number survives one follow-up, meaning you can say what it was measured over and whether it moved because of your change or merely alongside it
  • Whether a failure is described with the specific change that followed it, rather than a lesson stated in general terms
  • Whether your part in a team effort is stated accurately, including what other people did

How to prepare

  • Write a page on each of three projects covering the constraint, the option you rejected, the measurement before and after, and what went wrong. Cut any line you cannot take a follow-up on, since you are writing the parts you will be pressed on rather than a summary.
  • Recover the real figures while you still have access: request volume, data size, latency with its percentile and window, team size, timeline. Note where each came from, whether a dashboard, a design document or memory, and mark the estimates so you can say which they are out loud.
  • Take your weakest project story to someone who works in a different area and have them ask why four times in succession. The point where you run out of answer is the part to go and re-read before the round.
PracHub interview research ↗
02

Technical Assessments

reported

The same problem is scored by two different mechanisms depending on the format, and preparing for one does not cover the other. With a person watching, partial progress is visible and a hint is a correction you can absorb; silence is the expensive failure, because nobody can read a half-written function. With an automated grader there is no partial credit for what you were about to do, nobody to ask, and the worked examples in the prompt are the entire specification. Read them as a contract, down to whether an empty result should be an empty list or no output at all.

What to demonstrate

  • In a live session, whether your commentary tracks what your hands are doing, and whether a hint redirects you or gets defended against
  • In an automated one, whether you cover the cases the examples do not show, since the hidden cases are where the score moves
  • Whether you manage the clock on purpose: abandoning an approach that is not converging while there is still time to write something simpler that finishes

How to prepare

  • Have someone hand you a problem and feed you one deliberately wrong hint. Practise testing it against a concrete case instead of accepting or rejecting it on authority.
  • Do one timed run a week in a plain browser editor with autocomplete, linting and your own snippets switched off, which is closer to what these environments give you
  • For the automated format, write the harness before the solution: a main that feeds the worked examples plus an empty and a single-element case and prints expected against actual, so a wrong submission is caught by you first
PracHub interview research ↗
03

Behavioral Assessments

reported

Many of these questions are about something that went wrong, and the grading sits mostly in the hours after you knew. Who found out first, whether that was you or an alert or a user, how long it took you to say it out loud, and whether the people who needed the news got it while they could still act on it. Engineers under-tell this part because it feels like confessing. The pattern it is looking for is the opposite: the quiet fix, an incident absorbed without telling anyone, after which nothing changed and the same failure is still available.

What to demonstrate

  • How the problem was found, and whether that route was one you had built or one that happened to you, since a user reporting it first means your instrumentation did not cover that failure
  • Whether time-to-detect and time-to-tell are separate numbers in your account and whether you know both, because a fast fix that nobody heard about until the retro is a different answer from a slow one that was announced immediately
  • Whether the resolution left something durable behind, a check that fires or a default that changed, rather than depending on people remembering to be careful
  • Whether you can say what the failure cost without either inflating it or waving it away

How to prepare

  • Reconstruct one incident you were part of as a timeline with clock times: first bad request, first signal, first person who knew, first message outside the team, mitigation, permanent fix. The gaps between those entries are what gets asked about
  • Look up the configuration of the signal that caught it, including its evaluation window and threshold. An alert defined on a five-minute aggregate cannot fire until the condition holds across that window, which puts a floor under time-to-detect that has nothing to do with how severe the failure was. Be able to say what that floor was and whether anyone had chosen it deliberately
  • Prepare one story where you escalated early and the severity turned out to be smaller than you thought, including what it cost the people you pulled in. Without it, every answer you give about raising alarms is unfalsifiable
PracHub interview research ↗
04

Senior Leadership Interview

reported

An unlabelled round is first an information problem, and the cheapest information is free. Whoever schedules it can usually tell you how long it runs, who will be in the room and what they work on, whether you will be writing code and in what environment, and whether anything is being sent beforehand. Ask in writing so the answer is on record, then prepare for the two or three formats those answers still leave open instead of betting on one. What separates a strong candidate is not guessing right; it is having an opening that works whichever one it turns out to be.

What to demonstrate

  • Whether you can start work from an ambiguous brief, since tolerating a vague scope without stalling is the same thing the job asks for
  • Whether the questions you asked beforehand were ones that change your preparation, such as duration, medium and who is joining, rather than ones whose answers you could not have acted on
  • Whether you adapt when the round turns out to be something other than what you were told, instead of spending the first ten minutes visibly recalibrating

How to prepare

  • Send one short scheduling message asking four things: how long, who is joining and what they work on, whether you will be writing code and where, and whether to prepare anything in advance. Treat a vague reply as real information, since it means the round is loosely structured and you will be shaping it yourself.
  • Write one opening that works in any of the formats still open: restate in your own words what you have been asked to do, then ask which of two directions is more useful to them. Say it aloud until it stops sounding recited.
  • Set up for the two most likely formats before the call starts, with a blank editor in the language you would choose and a shared document you can type into, so a format surprise costs you nothing in the first minutes
PracHub interview research ↗

PracHub editorial advice for the preparation topics above.

01

Choosing an index from the columns a query mentions rather than from how it filters and orders

A composite B-tree index on (a, b, c) can be seeked only as a left prefix: equality on a, then equality on b, then a range or an ordering on c. A query that filters on b alone cannot seek into it at all and at best gets a full scan of the index; a query that filters a and ranges on b gets no benefit from c, because the index is only sorted by c within a fixed (a, b) pair. The practical consequence is that one index per column is close to useless for multi-predicate queries while a single correctly ordered composite index turns a scan into a lookup. The ordering half is what gets missed: if the index cannot satisfy the ORDER BY, the database must read every matching row and sort before the limit can apply, so a LIMIT 20 over a million matching rows still reads a million rows.

02

Shipping a migration and the code that depends on it as a single change

During any rolling deploy, and for as long as a rollback remains possible, old and new code execute against the same schema at the same time. A migration that drops or renames a column breaks every instance that has not restarted yet, and code that requires a column the migration has not applied breaks every instance that restarted early. The discipline is expand then contract: add the new column nullable, write both shapes, backfill in batches, move reads across once the backfill is verified, and only then stop writing the old shape and drop it - four deploys, usually spread over days. It feels disproportionate until the first rollback, at which point it is the only reason the previous version still runs.

03

Arguing past a hint

When the interviewer asks what happens for a particular input or floats a different data structure, stop and take it seriously; it is almost always a correction rather than idle curiosity. Talking over it converts a recoverable wrong turn into a data point about how you handle review.

04

Trusting input because it came from your own front end

Anything crossing a trust boundary is hostile: parameterise queries instead of building SQL by concatenation, validate against an allow-list rather than a deny-list, and bound the size of anything you allocate from a request. Raising this unprompted in an API or design question is a cheap and unusually strong signal.

Choose a category, try a prompt, then open its approach, worked solution or follow-up when you need it.

9 technical prompts3 include a worked solution

Please walk me through your process for fixing the provided code snipp…

medium
data structures and algorithms

Please walk me through your process for fixing the provided code snippet.

Approach
  1. State the target complexity and say which constraint rules the naive version out.
  2. Choose the data structure from the access pattern, not from familiarity.
  3. Name the brute-force solution and its complexity before improving on it.
Follow-up
  • Which test case would catch an off-by-one here?
  • What is the worst case, and how likely is it on real data?

How do you approach live coding tasks when collaborating with a peer?

medium
data structures and algorithms

How do you approach live coding tasks when collaborating with a peer?

Approach
  1. Restate the input: its shape, its size, and what is guaranteed about it.
  2. Choose the data structure from the access pattern, not from familiarity.
  3. State the target complexity and say which constraint rules the naive version out.
Follow-up
  • How does this change if the input no longer fits in memory?
  • Which test case would catch an off-by-one here?

Track a rolling failure rate per destination for circuit decisions

easyWorked solution
sliding windowring buffercircuit breaker

The egress service delivers about 1,500 webhooks per second across roughly 40,000 destinations, each call bounded by a 10 second timeout. Maintain, per destination, the failure rate over the trailing 60 seconds so a caller can ask before dispatch whether the circuit should open. Attempts arrive as (destination_id, finished_at_ms, outcome). Requirement: amortised O(1) per attempt, with total memory bounded by the destination count rather than by traffic. Give the structure, its exact memory, and the rule that stops a destination with three attempts from opening a circuit.

Approach
  1. Name the exact-deque version and then reject it as the default. Holding timestamps and advancing a tail pointer past anything older than now minus 60 seconds is a correct two-pointer window at amortised O(1) per attempt, but its memory tracks in-window traffic, so one destination in a retry storm holds hundreds of thousands of entries while thousands of quiet destinations hold none.
  2. Use a ring of 60 one-second buckets per destination, each bucket a pair of counters for attempts and failures. On an attempt, advance the ring by the elapsed whole seconds, zeroing at most min(elapsed, 60) buckets, then increment the head. That is amortised O(1) with a fixed footprint per destination.
  3. State the footprint: 60 buckets times two 4-byte counters is 480 bytes of payload per destination, so 40,000 destinations is roughly 20 to 25 MB with per-entry overhead, bounded by the catalogue rather than by the rate. The cost is granularity, since the oldest bucket ages out in whole seconds, which is far tighter than the decision needs.
  4. Require a minimum sample before the circuit may open. A destination with three attempts and three failures reads as 100 percent and is not evidence; a floor of roughly 20 attempts in the window makes the ratio meaningful, and below that floor use a run of consecutive failures as the trigger instead.
  5. Expire idle destinations, or memory grows with every destination ever seen rather than with the live set. Hold the rings in a bounded LRU keyed on destination_id and treat a miss as no history, which is the correct default for an endpoint that has been silent for a minute.
  6. Keep the half-open probe out of the window arithmetic. After the circuit opens, one probe per interval decides whether to close it, and folding that single success into a window that still holds a 100 percent failure history would reopen the destination on one data point.
Worked solution 20 min
  1. Define the bucket struct and the advance step: take floor(finished_at_ms / 1000), compare with the ring's current second, zero min(delta, 60) buckets forward, then write into the new head.
  2. Trace a destination that receives 5 attempts, goes silent for 90 seconds, then receives one more, and confirm the rate is computed from one attempt rather than six.
  3. Compute total memory for 40,000 destinations at 60 buckets of two 4-byte counters, and state what changes if the window widens to 300 seconds.
  4. Write the open rule as a single predicate combining the minimum-attempt floor with the rate threshold.
EXPECTED RESULTA per-destination ring of 60 one-second (attempts, failures) buckets advanced lazily for amortised O(1) cost, roughly 480 bytes of counters per destination and about 20 to 25 MB for 40,000 of them, an LRU bound on live rings, and an open rule requiring both a minimum attempt count in the window and a rate above threshold.
Follow-up
  • The fleet is 30 instances and each sees roughly a thirtieth of a destination's traffic. Where does the rate actually live, and what does a per-instance answer get wrong?
  • A destination answers in 9.5 seconds and succeeds. It is not failing but it is consuming your per-destination concurrency. What signal should open the circuit here?
  • How would you make the window survive a process restart, and is it worth the cost?

For a candidate senior enough that the loop turns on design and judgement rather than on whether the coding round gets finished. Five days build one system properly and then stress it; coding gets a single maintenance day, on the assumption that the risk at this level is an unexamined tradeoff rather than a missed algorithm.

Small steps. Visible outcomes.0 / 7 completed
ONE WEEK · YOUR PACE

Prepare, practise & reflect

One practical outcome each day. Spend longer where you need it.

0 / 7 done
01Numbers before diagrams
  • Build your own reference card of the figures you will re-derive all week: bytes for a realistic record, requests per second implied by a given daily active count, and the storage that a year at a given write rate produces. Derive each one rather than copying it, because the derivation is what survives a follow-up.
  • Turn one product statement into capacity requirements. From ten million daily users at four writes and forty reads each, state the peak-to-average factor you are assuming and why, then produce peak write QPS, peak read QPS and a year of storage.
  • Write the two numbers whose order of magnitude changes the design, the read-to-write ratio and the working-set size against memory per node, and state the threshold at which each one flips your answer.

Deliverable: A one-page numbers card and one worked capacity estimate with every assumption written down.

Practice prompt ↗Practice prompt ↗Worked solution ↗
02One system, from requirements to schema
  • Spend the first ten minutes producing only functional requirements, non-functional targets with numbers attached, a p99 latency, a durability expectation, a consistency requirement, and an explicit out-of-scope list.
  • Define the interface before the boxes: the three or four endpoints, their parameters, what each returns, and which of them are idempotent.
  • Write the data model, then write the single access pattern that justifies it, and state what the schema would have to become if the dominant access pattern were the other one.

Deliverable: One design carried to endpoint-and-schema depth, with non-functional targets expressed as numbers and a written out-of-scope list.

Practice prompt ↗Practice prompt ↗
03The consistency you are actually buying
  • Write out what a client sees under asynchronous replication when its write commits on the leader and its next read is served by a lagging follower, then write the two fixes, pinning that session's reads to the leader for a bounded window or carrying a version token the replica must reach, and the cost of each.
  • Work the quorum arithmetic on paper for N of three with W and R of two, and separate what R + W > N does guarantee, that any read set intersects any write set, from what it does not: on its own it is not linearizability, and a sloppy quorum that accepts writes on nodes outside the preference list breaks even the intersection.
  • Take two storage choices with different defaults, a single-leader relational store committing synchronously and a quorum-replicated store that converges eventually, and write the specific product behaviour that would be wrong under each, rather than a general statement about which is stronger.

Deliverable: A page separating what quorum overlap guarantees from what it does not, with one concrete product misbehaviour attached to each gap.

Practice prompt ↗Practice prompt ↗
04Failure is the design
  • For one write path, work through the case where the client times out after the server has already committed, then design the idempotency key: who generates it, how long it is retained, and what the duplicate request returns.
  • Express the retry policy as parameters rather than as a word: maximum attempts, base delay, backoff factor, jitter, and which error classes are retried at all. Then state why retrying a non-idempotent write without a key is a correctness bug and not merely waste.
  • Compute the fan-out effect on tail latency. If a request waits on ten backends and each independently exceeds its p99 one percent of the time, the chance at least one is slow is 1 - 0.99^10, about ten percent. Then write why independence is the optimistic assumption and what correlates them in practice.
  • Name the backpressure mechanism for one queue or one dependency in the design, a bounded queue with shedding or a concurrency limit, and write what the caller is told when it engages.

Deliverable: One write path with an idempotency design, a parameterised retry policy, and a written tail-latency calculation with its assumption named.

Practice prompt ↗Practice prompt ↗Worked solution ↗
05Scaling the hot path
  • Choose cache-aside or write-through for one read path and write the staleness window each produces, then name the invalidation event and what the system does when that event is lost.
  • Design against the stampede: either coalesce requests so only one recomputes a missing key, or refresh early with jittered expiry, and write why identical TTLs on keys populated in the same moment produce a synchronised expiry and a thundering herd.
  • Shard one table by a key you choose, then answer the two questions that break the choice: which queries now require a scatter-gather, and what happens to the distribution when one tenant is a hundred times larger than the median.
  • Write the cost of adding a node under plain modulo placement, where nearly every key moves, against consistent hashing, where roughly one key in n+1 moves, and state what virtual nodes are for.

Deliverable: A caching and sharding decision for one path, each with its failure mode and its rebalancing cost written beside it.

Practice prompt ↗Practice prompt ↗
06Keep the coding hand in, at the bar that applies to you
  • Solve one medium problem in thirty minutes, then spend twenty more making it production-shaped: named invariants, validation at the boundary, and errors that distinguish a caller mistake from an internal fault.
  • Write the tests you would require of a colleague's version of that function: one for empty input, one for the boundary, and one for the case the implementation is most likely to get wrong.
  • Read a piece of your own code from six months ago and write the change you would ask for, phrased as you would actually phrase it in review.

Deliverable: One problem hardened to review standard, with its test list and one written review comment.

Practice prompt ↗
07Defend it while being interrupted
  • Run a forty-five-minute design mock with an interviewer briefed to change a requirement halfway, a tenfold traffic increase or a new strict consistency requirement, and to push on one number you estimated.
  • Rehearse the two sentences a senior loop is listening for: naming the tradeoff you are choosing against and why, and saying what you would measure to learn that the choice was wrong.
  • Prepare the design you regret: a real decision, the constraint that produced it, what it cost, and what you changed afterwards.

Deliverable: Mock notes recording how the design changed under the new requirement, plus a written account of one regretted decision.

Practice prompt ↗Worked solution ↗

Expand any day for tasks and deliverables. Your progress is saved on this device.

Team size, service count and tickets closed say very little. Seniority shows in the decision you owned: what you chose not to build, which constraint you traded away, whose objection you had to resolve before anything could move. A large project where you executed someone else's plan is a small story.

How do you handle feedback from managers or peers?

medium
behavioural and engineering judgement

How do you handle feedback from managers or peers?

Approach
  1. Pick a story where you made the decision, not one where you watched it.
  2. State the situation in two sentences and spend the rest on the reasoning.
  3. Close with what you would do differently, concretely.
Follow-up
  • How did you know your change caused the improvement?
  • What did you decide not to do, and why?

Can you walk me through your past work experience and key projects?

medium
behavioural and engineering judgement

Can you walk me through your past work experience and key projects?

Approach
  1. State the situation in two sentences and spend the rest on the reasoning.
  2. Give the blast radius: what could have broken, and what you measured.
  3. Name the disagreement and how you resolved it with evidence.
Follow-up
  • How did you know your change caused the improvement?
  • What would you do differently if you ran that again?

What are you looking for in your next role?

medium
behavioural and engineering judgement

What are you looking for in your next role?

Approach
  1. Name the disagreement and how you resolved it with evidence.
  2. Pick a story where you made the decision, not one where you watched it.
  3. Give the blast radius: what could have broken, and what you measured.
Follow-up
  • What did you decide not to do, and why?
  • How did you know your change caused the improvement?
  • 01

    How do you handle feedback from managers or peers?

  • 02

    Can you walk me through your past work experience and key projects?

  • 03

    What are you looking for in your next role?

PracHub interview preparation framework ↗
Is this an official Axi interview guide?

No. It is PracHub's own research and practice material for the Software Engineer role at Axi. Rounds and questions reflect what candidates have reported, not a process Axi has published, and they change over time. Confirm the current format and scope with your recruiter.

PracHub interview research ↗
How difficult are the technical interviews?

The difficulty is calibrated to the seniority of the role. Expect a rigorous assessment of your coding and architectural skills, but focus on explaining your logic rather than just finding the "perfect" answer.

PracHub interview research ↗
What is the typical timeline from start to finish?

Axi aims for an efficient process, often completing the cycle within three to four weeks. Timeliness depends on scheduling availability for both the candidate and Axi's hiring managers.

PracHub interview research ↗
Is the team culture collaborative?

Yes, candidates report that Axi highly values engineers who communicate well and work effectively with cross-functional partners. They describe interviewers looking for individuals who are humble, curious, and focused on collective success.

PracHub interview research ↗
Sources & methodology 3 sources ↗

No official company page is cited. Rounds and questions come from candidate reports and PracHub editorial material; each source shows the date it was read.