As a Software Engineer at BeamX TechLabs Pvt., you contribute directly to the company's technical work. The role focuses on building scalable, high-performance solutions that connect complex business requirements with the user experience. You will be responsible for designing, developing, and maintaining applications that serve the company's growing client base.
The work environment at BeamX TechLabs Pvt. is fast-paced and collaborative. You will engage with full-stack challenges, working across both backend architecture and frontend interfaces. This position offers the opportunity to influence the company's product roadmap and technical standards, suiting engineers who enjoy solving architectural puzzles and delivering high-quality code in a high-growth environment.
Preparation focus
editorialNo round sequence has been reported for this company, so work the categories below and confirm the format with your recruiter.
What to demonstrate
- Breadth across SQL, experimentation and product reasoning
- Ability to state assumptions before choosing a method
How to prepare
- Drill the practice exercises below and time yourself
- Prepare three quantified stories about decisions you drove
PracHub editorial advice for the preparation topics above.
Letting a slow dependency consume unbounded concurrency
The failure that takes a service down is usually not an error but a delay. A dependency answering in thirty seconds instead of fifty milliseconds holds each request's worker or connection six hundred times longer, and since required concurrency is arrival rate times latency, a fleet sized for sixty in-flight requests now needs thirty-six thousand to sustain the same rate - so it queues, and requests whose clients have already abandoned them still occupy resources. Retries make it precisely worse: a policy of three attempts triples the load on a dependency at the exact moment it is least able to serve, which is how one slow dependency becomes an outage of everything sharing that pool. Containment is four specific things - a timeout on every outbound call shorter than the caller's remaining budget, a bounded pool per dependency so one cannot starve the others, backoff with full jitter rather than a fixed delay so retries do not resynchronise, and a circuit that stops sending once the failure rate makes an attempt pointless.
Paginating with LIMIT/OFFSET over a set that changes while the client is reading it
OFFSET n makes the database produce and discard n rows before returning anything, so the cost of a page grows with its depth rather than with its size and page 500 costs five hundred pages of work. The correctness problem is worse than the cost: if a row is inserted or reordered between two page fetches, rows shift across the offset boundary and are either skipped entirely or returned twice, and neither outcome leaves any trace in the response for the client to detect. Keyset pagination - WHERE (sort_key, id) < ($last_sort_key, $last_id) ORDER BY sort_key DESC, id DESC LIMIT n, backed by an index in exactly that order - reads only the rows it returns and is stable against concurrent inserts. It requires the tie-break column: a timestamp is not unique, and duplicate sort keys straddling a page boundary reintroduce the skip it was adopted to remove.
Sharing mutable state with no stated owner
Say which thread, request or task owns each mutable structure, and what protects it when the answer is more than one: a lock, a queue that hands ownership across, or an immutable copy per reader. A structure documented as safe for concurrent reads is usually not safe for a concurrent write alongside those reads.
Assuming the bug is in the framework
Suspect your own code first: read the stack trace top to bottom, check which versions are actually installed rather than which ones you believe are, and reproduce in isolation before blaming a library that thousands of people run daily. When the fault really is upstream, you need that minimal reproduction to say so credibly anyway.
Choose a category, try a prompt, then open its approach, worked solution or follow-up when you need it.
Archive a resource graph without breaking live references or recursing
Resources reference other resources within a tenant; for the largest tenant the reference table holds up to 2,000,000 nodes and 8,000,000 edges. Archiving a resource must archive everything reachable from it that nothing outside the set still references, refuse when a live external referrer exists, and terminate when references form cycles, which they legitimately do. Produce the archive order and the refusal list, targeting O(V+E). Say what stops the traversal crossing a tenant boundary, and why recursion is the wrong control structure at this size.
Approach
- Load the subgraph with the tenant predicate on both endpoints of the edge, not only on the side you started from. Scoping the left table alone is the classic cross-tenant leak: one mis-entered edge then pulls another tenant's resources into the traversal and, worse, into the archive.
- Traverse iteratively with an explicit stack. A 2,000,000-node graph can hold a chain deep enough to exhaust a native stack in the low tens of thousands of frames, and that failure is a process crash rather than an error you can return.
- Treat cycles as data rather than corruption: compute strongly connected components with Tarjan in O(V+E) using its own explicit stack, then condense. The condensation is a DAG, so a topological order over it gives the archive order, and every member of a component archives in one transaction because no order within a cycle is valid.
- Decide refusals with reverse edges. A candidate is archivable only if every in-edge originates inside the candidate set, so build the transpose or count in-degrees restricted to the visited set, and emit each blocked resource with the id of the external referrer, which is the only part of the answer an operator can act on.
- Store the graph as CSR rather than a map of lists: an offsets array of V+1 8-byte entries plus E 8-byte targets is about 80 MB at this size, where boxed adjacency lists cost several times that and lose cache locality on every hop.
- Run Kahn over the condensation for the order in O(V+E). If the emitted count is short of the component count the condensation step itself is wrong, since a condensation cannot contain a cycle, which makes the check free.
Follow-up
- The graph is read in one query and the archive writes a minute later. What can change in between, and how do you make the write safe?
- The candidate set is 400,000 resources. Is that one transaction, and if not, what does a half-finished archive look like to a reader?
- An edge points at a resource in another tenant. Is that a refusal, an error, or an alert?
Track a rolling failure rate per destination for circuit decisions
The egress service delivers about 1,500 webhooks per second across roughly 40,000 destinations, each call bounded by a 10 second timeout. Maintain, per destination, the failure rate over the trailing 60 seconds so a caller can ask before dispatch whether the circuit should open. Attempts arrive as (destination_id, finished_at_ms, outcome). Requirement: amortised O(1) per attempt, with total memory bounded by the destination count rather than by traffic. Give the structure, its exact memory, and the rule that stops a destination with three attempts from opening a circuit.
Approach
- Name the exact-deque version and then reject it as the default. Holding timestamps and advancing a tail pointer past anything older than now minus 60 seconds is a correct two-pointer window at amortised O(1) per attempt, but its memory tracks in-window traffic, so one destination in a retry storm holds hundreds of thousands of entries while thousands of quiet destinations hold none.
- Use a ring of 60 one-second buckets per destination, each bucket a pair of counters for attempts and failures. On an attempt, advance the ring by the elapsed whole seconds, zeroing at most min(elapsed, 60) buckets, then increment the head. That is amortised O(1) with a fixed footprint per destination.
- State the footprint: 60 buckets times two 4-byte counters is 480 bytes of payload per destination, so 40,000 destinations is roughly 20 to 25 MB with per-entry overhead, bounded by the catalogue rather than by the rate. The cost is granularity, since the oldest bucket ages out in whole seconds, which is far tighter than the decision needs.
- Require a minimum sample before the circuit may open. A destination with three attempts and three failures reads as 100 percent and is not evidence; a floor of roughly 20 attempts in the window makes the ratio meaningful, and below that floor use a run of consecutive failures as the trigger instead.
- Expire idle destinations, or memory grows with every destination ever seen rather than with the live set. Hold the rings in a bounded LRU keyed on destination_id and treat a miss as no history, which is the correct default for an endpoint that has been silent for a minute.
- Keep the half-open probe out of the window arithmetic. After the circuit opens, one probe per interval decides whether to close it, and folding that single success into a window that still holds a 100 percent failure history would reopen the destination on one data point.
Worked solution 20 min
- Define the bucket struct and the advance step: take floor(finished_at_ms / 1000), compare with the ring's current second, zero min(delta, 60) buckets forward, then write into the new head.
- Trace a destination that receives 5 attempts, goes silent for 90 seconds, then receives one more, and confirm the rate is computed from one attempt rather than six.
- Compute total memory for 40,000 destinations at 60 buckets of two 4-byte counters, and state what changes if the window widens to 300 seconds.
- Write the open rule as a single predicate combining the minimum-attempt floor with the rate threshold.
Follow-up
- The fleet is 30 instances and each sees roughly a thirtieth of a destination's traffic. Where does the rate actually live, and what does a per-instance answer get wrong?
- A destination answers in 9.5 seconds and succeeds. It is not failing but it is consuming your per-destination concurrency. What signal should open the circuit here?
- How would you make the window survive a process restart, and is it worth the cost?
Canonicalise a request body into a stable idempotency fingerprint
idempotency_key.request_fingerprint is a SHA-256 over the method, path and canonicalised body, and a retry whose fingerprint differs must be rejected with 422 rather than served the stored response. Write the canonicaliser. Bodies are JSON up to 256 KB nested at most 32 levels; clients vary key order, whitespace and unicode escaping, and some send 64-bit ids as JSON numbers. Produce a deterministic byte string such that semantically identical bodies match and any semantic difference does not. State your complexity and name two normalisations you refuse to perform.
Approach
- Parse once into a tree, then re-serialise under fixed rules: object keys sorted, array order preserved, one escaping convention, no insignificant whitespace. Parsing is O(n) and sorting keys is O(k log k) per object, so O(n log n) overall with O(depth) stack, and the 32-level cap is enforced during parsing because hostile nesting is how a canonicaliser becomes a stack overflow.
- Sort keys by their UTF-8 bytes and say why the obvious implementation is wrong in some runtimes: a default string comparison that orders by UTF-16 code units places surrogate pairs, meaning code points from U+10000 up, below U+E000 to U+FFFF, which is not UTF-8 byte order, so two services written in different languages disagree on the same document.
- Do not re-encode numbers through a double. IEEE-754 binary64 represents integers exactly only up to 2^53, so normalising a 19-digit id through a float changes it, and 1 against 1.0 cannot be reconciled without deciding whether they are the same value. Preserve the literal token, and require ids as strings at the API boundary if you want them comparable.
- Reject duplicate keys rather than picking one. JSON permits them and parsers disagree, most keeping the last, so any choice you make ties the fingerprint to a parser detail that the code handling the request does not necessarily share.
- Frame the hash preimage so concatenation cannot collide: delimit or length-prefix the method, path and body, otherwise one request's fields can be rearranged into another request with the same byte stream and the same fingerprint.
- Name the refusals and their consequence: no case folding, no dropping of null-valued keys, no Unicode normalisation. Each makes two different requests fingerprint alike, and the resulting failure is the worst one this table has, since the second request is answered with the first one's stored response and its effect never happens.
Follow-up
- A client sends the same logical request with an extra field your API ignores. Same key, different fingerprint, so you return 422. Is that the right answer?
- Where does the fingerprint get computed relative to request decompression and the body-size limit?
- The endpoint takes 1,000 requests per second with 256 KB bodies. What does hashing cost, and does it belong at the edge or in the core service?
Keep soft-deleted accounts from blocking re-registration
app_user holds user_id, tenant_id, email CITEXT, password_hash (NULL for SSO principals), email_verified_at, auth_version, status ('invited','active','suspended','deactivated'), created_at, updated_at, deleted_at. Two live accounts for one address inside a tenant must be impossible, but an address freed by a soft delete must be reusable, and the same tenant may delete and re-register it repeatedly. Write the uniqueness DDL for PostgreSQL 16, then the equivalent for MySQL 8 where partial indexes do not exist, and say what each permits once three deleted rows already hold that address.
Approach
- Start from what is actually unique: not (tenant_id, email), but (tenant_id, email) among live rows. PostgreSQL says that directly — CREATE UNIQUE INDEX app_user_live_email ON app_user (tenant_id, email) WHERE deleted_at IS NULL. A full constraint over the same two columns burns the address permanently the first time someone deletes an account.
- Keep case-insensitivity in the type or the index, never in the application: CITEXT as given, or UNIQUE (tenant_id, lower(email)) as an expression index where the extension is unavailable. A case-sensitive unique column is exactly how two accounts for one human appear.
- For MySQL 8 the predicate has to move inside the key: add a discriminator column that is a constant 0 while the row is live and is set to user_id on delete, with UNIQUE (tenant_id, email, deleted_marker). Live rows share the constant and still collide; deleted rows differ from each other and stop colliding.
- State the NULL variant and its dependency: leaving the marker NULL for deleted rows also works, because a unique index treats NULLs as distinct — true in MySQL, and true in PostgreSQL only under the default NULLS DISTINCT, which PostgreSQL 15 lets you reverse. Check the polarity against the three existing deleted rows: constant-on-live is what preserves the collision you want, and reversing it silently admits duplicate live accounts.
- Say what a soft delete must do besides setting deleted_at: increment auth_version so existing tokens stop validating, leave resource.owner_user_id and resource_revision.actor_user_id intact, and accept that the address is retained — erasure is a different requirement answered by scrubbing the column, not by a DELETE that would break those references.
Worked solution 20 min
- Create the PostgreSQL partial unique index, insert a live row, soft delete it, and insert the same address again.
- Repeat the delete-and-reinsert cycle three times and confirm three deleted rows coexist with exactly one live row.
- Write the MySQL form with the discriminator, then deliberately reverse the polarity so live rows carry NULL, and show two live duplicates commit.
- Attempt a second live insert on both engines and map the resulting 23505 / ER_DUP_ENTRY to the 409 the handler should return.
Follow-up
- A deleted account re-registers with the same address the next day. Do the old resource rows follow the new user_id, and how does the API keep the two principals apart?
- How do you honour an erasure request while resource_revision.actor_user_id still references this table?
- What changes if a user may hold membership in two tenants?
Explain why the owner filter ignores the listing index
The only index on resource is (tenant_id, status, updated_at DESC, resource_id DESC). A new endpoint returns one user's resources across all statuses, newest created first: WHERE tenant_id = $1 AND owner_user_id = $2 ORDER BY created_at DESC LIMIT 20. On a tenant with 2M rows it takes 900 ms and EXPLAIN shows a sort above a large scan. Explain precisely why the existing index cannot serve it, give the index that can, and state which of these the new index still will not help: owner_user_id alone across tenants; the same query ordered by updated_at. PostgreSQL 16.
Approach
- Separate the two jobs an index does. For filtering, a composite btree is seekable only on a left prefix, so with no predicate on status the scan can at best range over tenant_id and test owner_user_id per row; PostgreSQL 16 has no btree skip scan to jump the unconstrained column.
- For ordering, the index is sorted by (status, updated_at) within a tenant and not by created_at, so the LIMIT cannot stop early: every matching row is read and then sorted. That is the 'Sort Method: top-N heapsort' line, and it is why the plan reads 2M rows to answer with 20.
- Derive the replacement from the access path — equality, equality, then the ordering column: CREATE INDEX CONCURRENTLY ON resource (tenant_id, owner_user_id, created_at DESC). The scan seeks to the (tenant, owner) range and walks 20 entries in order, so the Sort node disappears along with the row-read.
- Treat INCLUDE (title, status) as conditional, not free. An index-only scan still visits the heap for any row whose page is not marked all-visible, so on a table taking 1.2k writes/second the win depends on autovacuum keeping the visibility map current, and the wider index costs more on every insert.
- Answer the two negatives explicitly. owner_user_id alone is not a left prefix of the new index, so it degrades to a full scan of the index at best. Ordered by updated_at, the query still seeks on the (tenant, owner) pair but must sort, because only created_at is ordered within that pair.
- Measure both sides with EXPLAIN (ANALYZE, BUFFERS) and compare estimated against actual rows at the lowest node — a 2M-versus-200 misestimate there is usually what chose the plan, and adding an index will not fix a statistics problem.
Follow-up
- 90% of rows are status='active'. Would a partial index WHERE status = 'active' change your answer, and for which of the three queries?
- A dashboard runs this for 40 owners in one page load. What changes about the design?
- How do you roll this index out on a table taking 1.2k writes/second, and what does it cost on every insert from then on?
What specific difficulties have you faced while debugging JavaScript a…
What specific difficulties have you faced while debugging JavaScript applications, and how did you resolve them?
Approach
- Say what you would check first and why it is the highest-information step.
- Clarify what is being asked and what a complete answer contains.
- State your assumptions explicitly before working the problem.
Follow-up
- What assumption would you test first?
- How would you know your answer was wrong?
How do you ensure code maintainability and scalability when working on…
How do you ensure code maintainability and scalability when working on complex features?
Approach
- Clarify what is being asked and what a complete answer contains.
- State your assumptions explicitly before working the problem.
- Work from the requirement backwards to the design.
Follow-up
- How would you know your answer was wrong?
- What assumption would you test first?
How have you managed version control and collaborative workflows using…
How have you managed version control and collaborative workflows using Git & GitHub?
Approach
- Say what you would check first and why it is the highest-information step.
- Clarify what is being asked and what a complete answer contains.
- Work from the requirement backwards to the design.
Follow-up
- What assumption would you test first?
- How would you know your answer was wrong?
Convert the listing endpoint from offset pages to stable cursors
GET /v1/resources returns a tenant's resources newest-updated first, today with page and per_page, backed by index (tenant_id, status, updated_at DESC, resource_id DESC). Callers are a browser feed and a nightly sync job that walks every page. Users report items appearing twice or vanishing between pages, and page 400 is slow. Design the cursor contract: what the cursor contains and how it is encoded, the exact WHERE and ORDER BY, what happens when a row's updated_at changes mid-walk, how a client detects the end, and what the sync job does when a cursor is rejected.
Approach
- Separate the two defects, because they have different fixes. Cost: OFFSET n makes the engine produce and discard n rows, so price grows with page depth rather than page size and page 400 pays for 400 pages of work. Correctness: while the set shifts, rows cross the offset boundary and are skipped or repeated, and nothing in the response lets the client detect it.
- Write the seek: WHERE tenant_id = $1 AND status = $2 AND (updated_at, resource_id) < ($k, $id) ORDER BY updated_at DESC, resource_id DESC LIMIT n. The tie-break is not decoration - updated_at is not unique, and two rows sharing a timestamp across a page boundary reintroduce exactly the skip this was adopted to remove. PostgreSQL seeks the composite index on the row-value comparison directly; on an engine that does not optimise a row constructor, expand it into the equivalent OR form or the plan quietly degrades to a scan.
- Encode the cursor as an opaque token carrying the sort key, the id, and a fingerprint of the filter and sort order, signed or at minimum validated. A cursor replayed against a different sort or filter must be a 400 with its own code, not a silently wrong page - the sync job cannot notice the difference otherwise.
- State the guarantee precisely rather than generously. Keyset is stable against inserts and deletes elsewhere in the set, because the position is a value and not a count. It is not a snapshot: updated_at is mutable, so a row that is edited during the walk re-sorts and may be seen twice or not at all. If the sync job needs exactly-once coverage, order on an immutable key such as (created_at, resource_id), or walk resource_revision by revision_id and treat updated_at as data.
- Define termination and limits in the response, not in the client's inference: fetch n+1 rows, return n, and emit next_cursor only when the extra row existed. Absence of next_cursor is the sole end signal, because a page can legitimately come back short when rows are filtered after retrieval. Cap n and document the cap rather than honouring per_page=10000.
- Migrate without a flag day: keep page and per_page working, add the cursor, count usage per credential, and remove the offset path only once the sync job's traffic on it is zero.
Worked solution 25 min
- Write the old and new queries side by side and state the rows examined for page 400 under each.
- Define the cursor payload field by field, including the filter and sort fingerprint, and choose the encoding.
- Write the end-of-results rule and the cap, then the 400 response for a cursor that does not match the current query.
- Construct the mid-walk edit case: a row updated between page two and page three, and say exactly what the client sees.
- Write the deprecation plan for page and per_page, including the signal that says removal is safe.
Follow-up
- The client wants a total count and the ability to jump to page 400. What can you honestly offer instead, and what does each option cost?
- How do you paginate backwards, and what does that require of the index?
One log partition stops advancing while the others drain
Search results for a subset of tenants are hours stale; the rest are current. The projection consumer reports lag of zero on 15 of 16 partitions and 400,000 on one. Its error rate is flat and its CPU is idle. outbox_event has no pending rows older than a second, so the relay has published everything it holds. Identify the mechanism, give the ordered checks, and state what you do in the first ten minutes versus what you change permanently.
Approach
- Read the lag distribution first. A slow consumer lags everywhere; zero on fifteen partitions and 400,000 on one is not throughput. Idle CPU on the stuck partition means the consumer is not advancing its offset at all, which points at one message it cannot get past rather than at a rate problem.
- Exonerate the producer before touching the consumer. No pending outbox rows older than a second means the relay published, so the event exists in the log. This separates never sent from sent and never applied, which are different code paths and usually different owners.
- Read the message at the stuck offset and the handler's log lines for its event_id. A flat error rate with no progress has two explanations and you must distinguish them: the handler is throwing and the retry loop is swallowing it, or the handler is blocking on something and never returning. Idle CPU with no error lines favours the second.
- Mitigate before diagnosing further. Move the offending event to a dead-letter store and commit the offset past it. Adding consumers does nothing here, because a partition is consumed by exactly one member of the group, and the blast radius is every aggregate hashed to that partition, not only the aggregate that produced the bad event.
- Fix permanently by bounding handler attempts and dead-lettering on exhaustion, so no single message can stop a partition. Then replay the dead-lettered event once the handler is fixed: it carries aggregate_id and aggregate_version, so a consumer that discards versions it has already applied can absorb the replay, and resource_revision is the fallback if the event itself is unusable.
Follow-up
- The dead-lettered event carried aggregate_version 7 and the projection had applied 6. What must the replay do differently if 8 and 9 landed in the meantime?
- How do you show staleness to the user while the partition is behind, given the API already returns the projection's watermark?
- What changes if the message is poison because a previous deploy wrote a payload shape the current code cannot parse?
For someone fluent in a dynamic language who has shipped real work but has never had to say what the runtime is doing underneath. The week is built on measuring and deliberately breaking things, because the questions that expose this background are the ones where the interviewer asks why a second time.
Prepare, practise & reflect
One practical outcome each day. Spend longer where you need it.
0 / 7 done01Measure before reasoning
- Take a slow piece of your own code, write down in advance where you believe the time goes, then profile it and record how wrong the guess was. The cost is usually an allocation you did not notice or an accidental quadratic membership test.
- Replace one list membership test inside a loop with a set and measure at a thousand, ten thousand and a hundred thousand elements, confirming the shape of the curve rather than only that it got faster.
- Write down the three quantities you can now measure instead of assert: wall time, peak memory, and call count for the function you suspected.
Deliverable: A before-and-after profile of real code plus a written note on the size of the gap between the guess and the measurement.
Practice prompt ↗Practice prompt ↗Worked solution ↗02References, copies, and the bugs they produce
- Write the function with a mutable default argument, call it three times, and explain the accumulating result: the default is evaluated once when the function is defined, so every call shares one object.
- Build a nested structure, take a shallow copy, mutate an inner element, and show that both views changed, because a shallow copy duplicates the container and not the elements. Then fix it with a deep copy and state the cost you just accepted.
- Write two functions, one mutating its argument in place and one rebinding the local name, and predict the caller's view of each before running it. That single distinction produces most of the bugs that pass their tests.
Deliverable: Three small programs whose output you predicted correctly before running, each with a one-line statement of the rule underneath.
Practice prompt ↗Practice prompt ↗03Types, once, in a language that checks them
- Port one module you have already written, roughly a hundred lines, into a statically typed language, and record every place the compiler demanded an answer your original had left implicit: a value that can be absent, a numeric width, a case never handled.
- Write the same signature in both languages and state what the static one guarantees before the program runs and what it does not, since it will not save you from a wrong algorithm or an index out of range.
- Write the difference between an interface satisfied by declaration and one satisfied structurally, with one case each where the other approach would miss the mistake.
Deliverable: One module in two languages plus a list of the questions the type checker forced you to answer.
Practice prompt ↗Practice prompt ↗04Concurrency, starting with what actually runs at the same time
- Run the same CPU-bound function across four threads and four processes and measure both. Under the default CPython build the threaded version will not speed up, because only one thread executes bytecode at a time; the process version will. Check which build you are on first, since free-threaded builds remove that lock and change the result.
- Then run a blocking I/O workload across four threads and measure it speeding up, because the interpreter releases that lock around blocking calls, which is why treating threads as useless is wrong as a general claim.
- Build the lost update: two threads each incrementing a shared counter a hundred thousand times, and show a final value below the expected sum, because an increment is a load, an add and a store and the thread can be suspended between them. Fix it with a lock and then measure what the lock costs.
Deliverable: Three measurements, threads against processes on CPU work, threads on I/O work, and a demonstrated lost update, each with the mechanism written underneath.
Practice prompt ↗Practice prompt ↗Worked solution ↗05Debugging as a procedure rather than an instinct
- Work one real failure as a bisection: find a revision or an input size where it is good and one where it is bad, halve repeatedly, and state the two assumptions bisection needs, that the property changes exactly once across the range and that the test is reliable.
- Minimise one failing input to the smallest version that still fails, and record how many rounds it took.
- Keep a hypothesis log for one bug in three columns, what I believe, what would disprove it, what I observed, and stop yourself the first time you are about to change two things at once.
Deliverable: One bug worked to root cause with a written hypothesis log and a minimised reproducing input.
Practice prompt ↗Practice prompt ↗06Tests that catch the bug you are about to write
- Implement an LRU cache with a capacity bound, then write the three test cases that would catch an off-by-one in eviction: insert exactly capacity items and assert nothing was evicted, insert one more and assert the least recently used key is the one gone, and read an old key just before that insert so the eviction victim changes.
- Add a property test comparing your implementation against a deliberately slow reference, an ordered list scanned linearly, over a few thousand random operation sequences, because a slow reference finds the cases you would not have thought to write.
- Write one numeric test that fails under exact equality and passes with a tolerance, and state why the tolerance has to be relative rather than absolute once the magnitudes grow.
Deliverable: An LRU implementation with three boundary tests, one property test against a slow reference, and one tolerance-based numeric test.
Practice prompt ↗Practice prompt ↗07Debug something broken, out loud
- Have someone plant three defects in a two-hundred-line program, an off-by-one, a shared mutable state bug, and a wrong error-handling path, then find them while narrating, under a fixed rule: state the hypothesis before touching anything.
- Time each one and record which tool found it, reading, a printed value, a debugger, or a test, because the question asked in interviews is how you would find it rather than what it was.
- Write the sentence you will use when you do not yet know the cause, one that names the next measurement instead of offering a guess.
Deliverable: A recorded debugging session with time-to-find per defect and the method that found each.
Practice prompt ↗Worked solution ↗Expand any day for tasks and deliverables. Your progress is saved on this device.
Counting review comments or mentees proves nothing. The useful version is a specific change you approved with a reservation you stated, or one you blocked and the delay that cost. Say which standard you were holding and why it was worth the friction. A mentoring story needs the thing the other person can now do without you.
Can you explain your experience with Core Java and how you have utiliz…
Can you explain your experience with Core Java and how you have utilized it in production environments?
Approach
- Pick a story where you made the decision, not one where you watched it.
- Name the disagreement and how you resolved it with evidence.
- State the situation in two sentences and spend the rest on the reasoning.
Follow-up
- How did you know your change caused the improvement?
- What would you do differently if you ran that again?
Estimate work you have never done and defend the range
You are asked to estimate a change you have never attempted: add a column to a 100-million-row table, populate it, move reads across, and drop the old shape. Give a range with the assumptions that generate it, including batch size, the signal your backfill throttles on, and wall-clock hours, and name the three unknowns that would move the number most. Then describe a real estimate you gave under comparable ignorance: how you expressed its uncertainty, what you committed to, and how wrong you turned out to be.
Approach
- Decompose into independently deployable steps before estimating anything: add the column nullable, write both shapes, backfill in batches, verify, move reads, stop writing the old shape, drop it. That is four deploys spread over days, and the calendar estimate is dominated by them rather than by the loop's runtime.
- Do the arithmetic aloud for the part that has arithmetic in it: batch size times number of batches times per-batch duration, at a write rate the primary can absorb alongside roughly 1.2k writes per second of production traffic. The loop is throttled by replication lag and lock waits, not by how fast it can issue statements.
- Price the schema step by its lock rather than its statement duration. In PostgreSQL an ALTER TABLE taking ACCESS EXCLUSIVE waits for every open transaction on that table while later queries queue behind it, so a millisecond change issued during a thirty-second analytics query stalls that table for thirty seconds. Adding a nullable column with a non-volatile default avoids a rewrite from version 11; a new index wants CREATE INDEX CONCURRENTLY, which cannot run inside a transaction block and leaves an invalid index behind if it fails.
- Express the answer as a range whose endpoints each trace to a stated assumption, then name the cheapest experiment that collapses it, which is almost always running one real batch against the real table and multiplying.
- Commit to a checkpoint rather than a completion date: the day you report a measured number from that first batch. That is a promise you can keep under uncertainty, and it is what the asker actually needs in order to plan.
Follow-up
- How do you verify the backfill genuinely finished, given rows written by production traffic while it ran?
- Where does the backfill resume from after a worker is killed mid-batch, and what makes that resume point trustworthy?
- Your first batch comes back ten times slower than assumed. What do you tell the person waiting on the estimate, and when?
Narrate an outage you owned from page to postmortem
Pick an incident you personally drove, ideally one where writes were affected rather than reads. In six to eight minutes: state the symptom as it first appeared on a dashboard, the blast radius you established before you knew the cause, the mitigation you applied and when, the mechanism you eventually proved, and the follow-up that would prevent a repeat. Bring numbers: error rate, tenants affected, minutes to mitigate, minutes to resolve. If you cannot name what you measured, choose a different incident.
Approach
- Open on the signal rather than the cause: which metric at which percentile moved, on which service, at what time, so the listener follows the same evidence you had rather than a conclusion you already reached.
- Separate mitigation from diagnosis out loud. State what you did to stop the bleeding (flag off, shed traffic, drain a lease, roll back a deploy) and say plainly that you did it before the mechanism was known, because those are two jobs with different deadlines.
- Establish blast radius in countable terms: how many tenants, how many writes, and crucially whether the effect was loss or only delay. An append-only revision table or a pending outbox row means the change survived and the projection was merely behind, which is a repair rather than a data-loss incident.
- Prove the mechanism instead of asserting it. Name the trace span that grew, the plan that flipped to a sequential scan, the lease that expired, plus one alternative you ruled out and the signal that stayed flat while you ruled it out.
- Close on the durable fix and its cost, distinguishing what landed that week from what needed an expand-and-contract migration across several deploys, and say which of the two you actually finished.
Follow-up
- What would you do differently in the first five minutes, given the same dashboard and no more information?
- Which follow-up action did you deliberately not take, and why was dropping it the right call?
- How did you convince yourself the mitigation was safe to apply while the cause was still unknown?
- 01
Can you explain your experience with Core Java and how you have utilized it in production environments?
- 02
You are asked to estimate a change you have never attempted: add a column to a 100-million-row table, populate it, move reads across, and drop the old shape. Give a range with the assumptions that generate it, including batch size, the signal your backfill throttles on, and wall-clock hours, and name the three unknowns that would move the number most. Then describe a real estimate you gave under comparable ignorance: how you expressed its uncertainty, what you committed to, and how wrong you turned out to be.
- 03
Pick an incident you personally drove, ideally one where writes were affected rather than reads. In six to eight minutes: state the symptom as it first appeared on a dashboard, the blast radius you established before you knew the cause, the mitigation you applied and when, the mechanism you eventually proved, and the follow-up that would prevent a repeat. Bring numbers: error rate, tenants affected, minutes to mitigate, minutes to resolve. If you cannot name what you measured, choose a different incident.
Is this an official BeamX TechLabs Pvt. interview guide?
No. It is PracHub's own research and practice material for the Software Engineer role at BeamX TechLabs Pvt.. Rounds and questions reflect what candidates have reported, not a process BeamX TechLabs Pvt. has published, and they change over time. Confirm the current format and scope with your recruiter.
PracHub interview research ↗How long should I prepare for the technical rounds?
Plan for at least 2–3 weeks of focused preparation, specifically reviewing your past projects and refreshing your knowledge on Java and React best practices.
PracHub interview research ↗What is the most important trait for a successful candidate?
The ability to clearly communicate your technical reasoning is just as important as the code you write. Show how you think through problems under pressure.
PracHub interview research ↗How many rounds are involved in the process?
Typically, you will face an initial screening, one or more technical assessments, and a final leadership round with the CEO.
PracHub interview research ↗How hard is the BeamX TechLabs Pvt. interview?
Candidates most commonly rate BeamX TechLabs Pvt.
PracHub interview research ↗Sources & methodology 3 sources ↗
Official role evidence, timestamped platform data and clearly labeled preparation advice.
- 01PracHub interview research ↗
PracHub editorial research into this company and role, maintained with this guide. Candidate-reported, not an employer publication.
platform · Accessed 2026-09-22 - 02PracHub Software Engineer practice ↗
Cross-company practice questions for this role.
platform · Accessed 2026-09-22 - 03PracHub interview preparation framework ↗
The framework the preparation plan follows.
platform · Accessed 2026-09-22
Explore related engineering environments and compare the preparation focus.
Airwallex Software Engineer Interview Guide
Failure-handling practice for Airwallex software engineer candidates: requests whose outcome a timeout leaves unknown, where a retry is safe, and deduplicating at the receiver instead of assuming exactly-once delivery.
OneMagnify Software Engineer Interview Guide
Design practice for OneMagnify software engineer prep that pushes past topology: turn a loose requirement into a schema and an API contract, then work out the read and write paths it implies.
OCBC Indonesia Software Engineer Interview Questions & Guide 2026
Prepare for the software engineer interview at OCBC Indonesia with original coding, system design and debugging exercises, each paired with a worked solution and the reasoning behind it.
PhaseZero Ventures Software Engineer Interview Questions & Guide 2026
Code-reading and review practice for PhaseZero Ventures candidates: tracing unfamiliar control flow, finding the invariant a function quietly depends on, and separating a correctness defect from a matter of taste.