Briza · Software Engineer
Updated · 2026-09-24

Briza Software Engineer
Interview Questions & Guide 2026

THE 60-SECOND BRIEF

As a Software Engineer at Briza, you are at the forefront of modernizing the insurance industry. Your role is critical in building and maintaining the infrastructure that allows developers to integrate insurance products seamlessly into their own applications. By simplifying complex insurance workflows, you enable businesses to offer coverage in real-time, effectively bridging the gap between legacy insurance systems and modern digital experiences.

Scope in the operational half of the job when the seat carries on-call. Rollout, rollback and what you would put on a dashboard belong inside a design answer rather than after it, and an answer that never reaches them reads as someone who has built systems but not run them.

Briza candidates report 4 rounds · ≈ 3-5 weeks. The stages below are what candidates describe, not a published process.

Trace a symptom to a mechanism under loadChoose indexes from the query's access pathPaginate large result sets with keyset cursors

36 min read

Browse Software Engineer questions

See the practice prompts

11Practice promptsAcross five skill areas
3With worked solutionsIncluded in the practice prompts

As a Software Engineer at Briza, you are at the forefront of modernizing the insurance industry. Your role is critical in building and maintaining the infrastructure that allows developers to integrate insurance products seamlessly into their own applications. By simplifying complex insurance workflows, you enable businesses to offer coverage in real-time, effectively bridging the gap between legacy insurance systems and modern digital experiences.

This position demands a high level of technical proficiency and a genuine interest in solving complex architectural problems. You will work within a collaborative environment where your code directly impacts the reliability and scalability of Briza’s platform. Because the company operates in a fast-paced environment, you will be expected to balance feature development with long-term system health, ensuring that the technology remains robust as the company grows.

01

CV Screening

reported

Because the format is not fixed, the first job in the room is classification. Listen to the opening question and decide what it is: a probe into work you have already described, a fresh problem to solve now, or a conversation about how you operate. Each wants a different register, and the common failure is forcing a rehearsed structure onto a question that did not ask for it. Running a full design ritual on a ten-minute debugging question reads as not listening. When you cannot tell which it is, ask how long they want to spend and answer at that depth.

What to demonstrate

  • Whether the shape of your answer matches the question, so a yes-or-no gets answered before it is justified and an open prompt gets a direction before a detour
  • Whether you check how much depth is wanted instead of deciding for them, and whether you stop when the answer is complete rather than continuing until someone interrupts
  • Whether you can be redirected in the middle of an answer without restarting it from the beginning
  • Whether a question outside your experience gets an honest boundary followed by reasoning from what you do know, instead of a confident answer with nothing behind it

How to prepare

  • Rehearse one project at three lengths, roughly thirty seconds, three minutes, and a full walkthrough at the depth of a design review, and practise switching between them when someone interrupts mid-telling
  • Have someone ask you five questions of deliberately mixed type in one sitting without telling you the types, and score only whether you identified each one correctly before you started answering
  • Draft the sentence you will use to check depth, along the lines of asking whether the short version is useful here or they want the detail, and use it in a real conversation this week so the day of the round is not its first outing
PracHub interview research ↗
02

Technical Screen

reported

Most of the time lost in this format is not lost to thinking. It goes to a standard-library call you half-remember, an off-by-one in a loop bound, and a debugging loop that mutates code at random until something passes. When output is wrong, stop re-reading the whole function: take the smallest input that reproduces it and walk the state through by hand, printing intermediates if the environment allows. Guessing at a fix without a failing case you understand is how a five-minute bug becomes twenty, and the clock does not pause while you do it.

What to demonstrate

  • Whether you reach the right structure without a detour, and can write it from memory rather than only recall that one exists
  • Whether overflow is considered where the language has fixed-width integers, since a signed 32-bit value stops at 2,147,483,647 and then wraps in Java, is undefined behaviour in C++, and does not arise in Python, whose integers grow instead
  • Whether recursion depth is treated as a constraint on large inputs, given that CPython's default limit is 1000 frames and a deep recursion can exhaust the stack in any language where an iterative version would not
  • Whether a failing case is isolated and explained before any edit is made to the code

How to prepare

  • From an empty file and with no references open, implement the pieces you lean on most: a heap push and pop, an iterative DFS with an explicit stack, and a binary search whose midpoint is written lo + (hi - lo) / 2, which avoids the overflow that (lo + hi) / 2 can hit in a fixed-width integer type
  • Time yourself on the ten library calls you look up most, such as sorting with a custom comparator, splitting and joining strings, and finding the next key at or above a value in an ordered map, until the lookup is gone
  • Take a solution you know is broken and, before touching it, write one sentence naming the input, the expected value and the actual value. Repeat until you do it without deciding to.
PracHub interview research ↗
03

Technical Deep Dive

reported

The same problem is scored by two different mechanisms depending on the format, and preparing for one does not cover the other. With a person watching, partial progress is visible and a hint is a correction you can absorb; silence is the expensive failure, because nobody can read a half-written function. With an automated grader there is no partial credit for what you were about to do, nobody to ask, and the worked examples in the prompt are the entire specification. Read them as a contract, down to whether an empty result should be an empty list or no output at all.

What to demonstrate

  • In a live session, whether your commentary tracks what your hands are doing, and whether a hint redirects you or gets defended against
  • In an automated one, whether you cover the cases the examples do not show, since the hidden cases are where the score moves
  • Whether you manage the clock on purpose: abandoning an approach that is not converging while there is still time to write something simpler that finishes

How to prepare

  • Have someone hand you a problem and feed you one deliberately wrong hint. Practise testing it against a concrete case instead of accepting or rejecting it on authority.
  • Do one timed run a week in a plain browser editor with autocomplete, linting and your own snippets switched off, which is closer to what these environments give you
  • For the automated format, write the harness before the solution: a main that feeds the worked examples plus an empty and a single-element case and prints expected against actual, so a wrong submission is caught by you first
PracHub interview research ↗
04

Values-Fit Discussion

reported

This round is deciding whether a change you make without supervision can be allowed to reach production. It is scored on what you knew at the moment you decided, not on how it turned out, so a story that opens with the result and works backwards reads as luck retold as judgement. Say what the options were, what you did not know, what you did to shrink the unknown before committing, and what you accepted as the worst plausible case. The detail that separates answers is a bound: how many users, how much data, and for how long, if you had been wrong.

What to demonstrate

  • Whether the reasoning you give was available at the time you decided rather than after the result came in, since a story whose deciding evidence arrived later describes an outcome and not a judgement
  • Whether you can put units on the exposure (users, rows, minutes of degraded service) and whether the containment you chose actually bounded it: a canary bounds the request path it fronts, while a background job writing to a shared table reaches every user regardless of which version served their requests
  • Whether the reversal path existed before you shipped or was improvised during the incident, and whether it restores state or only stops further damage

How to prepare

  • For your three largest changes, write down the one thing you would have had to be wrong about for it to fail, and what your best estimate of it was on the day you shipped. If you never held an estimate, that is the gap the follow-up questions will find
  • Write the undo procedure for one of those changes as it existed at the time, then mark which steps restore data and which only stop new damage. Turning a flag off or reverting a deploy ends the new writes; rows already written come back only from a copy you kept, and a dropped column comes back empty unless something outside the schema holds the values
  • Rehearse one story from the decision point forward and stop before the outcome, then have someone ask what you would do next. If the story only works with the ending attached, it is an anecdote rather than a decision you can defend
PracHub interview research ↗

PracHub editorial advice for the preparation topics above.

01

Choosing an index from the columns a query mentions rather than from how it filters and orders

A composite B-tree index on (a, b, c) can be seeked only as a left prefix: equality on a, then equality on b, then a range or an ordering on c. A query that filters on b alone cannot seek into it at all and at best gets a full scan of the index; a query that filters a and ranges on b gets no benefit from c, because the index is only sorted by c within a fixed (a, b) pair. The practical consequence is that one index per column is close to useless for multi-predicate queries while a single correctly ordered composite index turns a scan into a lookup. The ordering half is what gets missed: if the index cannot satisfy the ORDER BY, the database must read every matching row and sort before the limit can apply, so a LIMIT 20 over a million matching rows still reads a million rows.

02

Assuming an isolation level prevents the anomaly you actually have

Isolation levels are named by the SQL standard but implemented differently, so any claim about one is only true of a named engine. PostgreSQL defaults to READ COMMITTED, where every statement takes a fresh snapshot, so two statements inside one transaction can legitimately disagree about the same row. Its REPEATABLE READ is snapshot isolation: it removes non-repeatable and phantom reads but permits write skew, where two transactions each read a set, each conclude their own write is safe, both commit, and the combined result violates a constraint that no single row expresses. Only SERIALIZABLE closes that, and it closes it by aborting a transaction with a serialization failure (SQLSTATE 40001), which means the guarantee is theoretical unless the application has a retry loop. InnoDB's REPEATABLE READ is a different mechanism again - plain SELECTs read a consistent snapshot while locking reads and writes see the latest committed row - so a read-modify-write inside one transaction can act on a value that the transaction's own earlier SELECT never returned.

03

Writing code before the input contract is pinned down

Before the first line, state the types, the size bounds, whether duplicates, negatives or an empty input are possible, whether the input is sorted, whether you may mutate it, and what the function returns when nothing matches. Every one of those answers changes the code, and discovering one at minute twenty costs a rewrite you no longer have time for.

04

Check-then-act on shared state

Read, decide, write is not safe under concurrency unless the decision and the write are one atomic step: a unique constraint with conflict handling, a compare-and-set, or a row lock held for the whole transaction. Two requests can both pass the existence check before either inserts, which shows up as duplicate rows under load and never in a single-threaded test.

Choose a category, try a prompt, then open its approach, worked solution or follow-up when you need it.

8 technical prompts3 include a worked solution

Can you walk me through your thought process while solving this coding…

medium
data structures and algorithms

Can you walk me through your thought process while solving this coding challenge?

Approach
  1. State the target complexity and say which constraint rules the naive version out.
  2. Walk one small example through your approach before writing the whole thing.
  3. Name the brute-force solution and its complexity before improving on it.
Follow-up
  • What is the worst case, and how likely is it on real data?
  • Which test case would catch an off-by-one here?

How would you approach refactoring this specific block of code?

medium
data structures and algorithms

How would you approach refactoring this specific block of code?

Approach
  1. State the target complexity and say which constraint rules the naive version out.
  2. Choose the data structure from the access pattern, not from familiarity.
  3. Restate the input: its shape, its size, and what is guaranteed about it.
Follow-up
  • What is the worst case, and how likely is it on real data?
  • How does this change if the input no longer fits in memory?

Archive a resource graph without breaking live references or recursing

mediumWorked solution
graph traversaltopological ordertenant isolation

Resources reference other resources within a tenant; for the largest tenant the reference table holds up to 2,000,000 nodes and 8,000,000 edges. Archiving a resource must archive everything reachable from it that nothing outside the set still references, refuse when a live external referrer exists, and terminate when references form cycles, which they legitimately do. Produce the archive order and the refusal list, targeting O(V+E). Say what stops the traversal crossing a tenant boundary, and why recursion is the wrong control structure at this size.

Approach
  1. Load the subgraph with the tenant predicate on both endpoints of the edge, not only on the side you started from. Scoping the left table alone is the classic cross-tenant leak: one mis-entered edge then pulls another tenant's resources into the traversal and, worse, into the archive.
  2. Traverse iteratively with an explicit stack. A 2,000,000-node graph can hold a chain deep enough to exhaust a native stack in the low tens of thousands of frames, and that failure is a process crash rather than an error you can return.
  3. Treat cycles as data rather than corruption: compute strongly connected components with Tarjan in O(V+E) using its own explicit stack, then condense. The condensation is a DAG, so a topological order over it gives the archive order, and every member of a component archives in one transaction because no order within a cycle is valid.
  4. Decide refusals with reverse edges. A candidate is archivable only if every in-edge originates inside the candidate set, so build the transpose or count in-degrees restricted to the visited set, and emit each blocked resource with the id of the external referrer, which is the only part of the answer an operator can act on.
  5. Store the graph as CSR rather than a map of lists: an offsets array of V+1 8-byte entries plus E 8-byte targets is about 80 MB at this size, where boxed adjacency lists cost several times that and lose cache locality on every hop.
  6. Run Kahn over the condensation for the order in O(V+E). If the emitted count is short of the component count the condensation step itself is wrong, since a condensation cannot contain a cycle, which makes the check free.
Worked solution 30 min
  1. Write the edge-loading query with the tenant predicate on both endpoints and state what it does with a cross-tenant edge.
  2. Implement iterative Tarjan with an explicit stack and confirm on a three-node cycle that it emits one component of size three.
  3. Build the transpose restricted to the visited set and mark every node with an in-edge from outside it as refused, carrying the referrer id.
  4. Run Kahn over the condensation and verify the emitted order against the referrer-before-referenced rule.
  5. Size the CSR arrays for 2,000,000 nodes and 8,000,000 edges and compare against a boxed adjacency map.
EXPECTED RESULTAn iterative O(V+E) traversal over a tenant-scoped CSR subgraph, SCC condensation so cycles archive atomically as one component, a transpose-based refusal list naming the external referrer for each blocked resource, and a Kahn topological order over the condensation, with recursion replaced by an explicit stack because of graph depth rather than style.
Follow-up
  • The graph is read in one query and the archive writes a minute later. What can change in between, and how do you make the write safe?
  • The candidate set is 400,000 resources. Is that one transaction, and if not, what does a half-finished archive look like to a reader?
  • An edge points at a resource in another tenant. Is that a refusal, an error, or an alert?

For someone who has spent the last few years shipping features and reading other people's code, and who has not solved a timed problem from a blank file in a long time. Five days rebuild the primitives and the patterns that sit on them, working from invariants rather than remembered solutions, and the last two attach that back to the rest of the loop.

Small steps. Visible outcomes.0 / 7 completed
ONE WEEK · YOUR PACE

Prepare, practise & reflect

One practical outcome each day. Spend longer where you need it.

0 / 7 done
01Rebuild the primitives by implementing them
  • Implement a dynamic array with doubling growth and an operation counter, then change the growth rule to add a fixed sixteen slots instead, and time both for n of ten thousand, a hundred thousand and a million. The fixed-increment version resizes n/16 times at O(n) each, so its total work is quadratic; doubling is what makes append amortised constant.
  • Implement a hash map with separate chaining and a load-factor resize, then insert ten thousand keys engineered to land in one bucket and record what happens to lookup time, so that average-case O(1) becomes a claim with a stated precondition rather than a reflex.
  • For dynamic-array append and hash-map insert, write down which cost is amortised rather than worst-case, which single operation pays the whole bill, and what a system with a hard per-operation deadline would have to do instead.

Deliverable: Two working implementations plus a timing table showing the input at which each structure's advertised complexity stops holding.

Practice prompt ↗Practice prompt ↗Worked solution ↗
02Arrays under an invariant: two pointers, sliding window, binary search
  • Solve longest-subarray-with-sum-at-most-K using a sliding window, then run it on an input containing negative numbers and watch it return the wrong answer: extending the window only moves the sum monotonically when every element is non-negative, and that precondition is the whole reason the technique works.
  • Write the binary search that finds the first index satisfying a predicate rather than an exact value, put the loop invariant above the loop in a comment, and verify termination on the two inputs that break careless versions: the empty range, and a range where every element satisfies the predicate.
  • Compute the midpoint as lo + (hi - lo) / 2 and write one line on why the obvious (lo + hi) / 2 is a genuine defect in a fixed-width integer type and a non-issue in a language with arbitrary-precision integers.

Deliverable: Three solved problems, each with its invariant written above the loop, plus one recorded input on which the sliding window is provably wrong.

Practice prompt ↗Practice prompt ↗
03Sorting, heaps, and the greedy argument that has to be proved
  • Solve one top-k problem three ways, by full sort, by a size-k heap, and by quickselect, then write the values of n and k at which each becomes the right choice, along with quickselect's quadratic worst case and why a randomised pivot makes that unlikely rather than impossible.
  • Implement bottom-up heapify and count sift-down steps to confirm it does linear work rather than n log n, because most nodes sit near the bottom of the tree and therefore move only a short distance.
  • Take interval scheduling by earliest finishing time and write the exchange argument out in full: given any optimal schedule, swapping in the earliest-finishing interval keeps it feasible and no smaller. Then construct the weighted variant where that same greedy fails and name what has to replace it.

Deliverable: A three-way top-k comparison with measured crossover points, one written exchange argument, and one counterexample to a greedy rule that looks almost identical.

Practice prompt ↗Practice prompt ↗
04Recursion, memoisation, and the step to a table
  • Take one problem with overlapping subproblems, such as edit distance or coin change, instrument the plain recursion with a call counter to show the blow-up, then add memoisation and re-count.
  • Convert the memoised version to a bottom-up table and state the two properties you relied on: each subproblem's result depends only on its arguments, and the dependencies form a DAG you can enumerate in order.
  • Rewrite one deep recursion with an explicit stack, then find the input length at which the original hits the interpreter's frame limit, which defaults to about a thousand frames in CPython, so you know when the rewrite is required rather than decorative.

Deliverable: One problem in three forms, naive, memoised and tabulated, with call counts for each and the input length at which recursion depth becomes the binding constraint.

Practice prompt ↗Practice prompt ↗Worked solution ↗
05Graphs, where most of the work is choosing the traversal
  • Implement BFS and DFS over one adjacency list, then answer for each which finds a shortest path in an unweighted graph and which you would use to detect a cycle in a directed graph, including why the in-progress versus finished distinction matters for the second.
  • Implement topological sort by in-degree, feed it a graph containing a cycle, and confirm the failure signature is that fewer than V nodes come out rather than an exception, then note that the order it produces is one of several valid ones.
  • Run a shortest-path search on a graph with a single negative edge weight and show the wrong answer, then write the precondition Dijkstra actually needs, non-negative weights, because it finalises a node's distance the first time that node is popped, and name the algorithm you would switch to and its own limit.

Deliverable: A small graph library with BFS, DFS and topological sort, plus two inputs that produce documented wrong answers under the wrong algorithm choice.

Practice prompt ↗
06One day for everything that is not an algorithm
  • Sketch one system only to the depth a coding-heavy loop tends to reach: the endpoints, what the service stores, and the single query pattern that decides the schema. Stop at twenty-five minutes.
  • Prepare the project answer for an interviewer who codes, which means rehearsing the two levels they push to: the specific thing you built, and why you chose that approach over the alternative they will name. Open with a number and be ready to say what it excludes.
  • Prepare the answer to what you would do differently, choosing a real technical mistake with a specific fix rather than a complaint about process or staffing.

Deliverable: One design sketch at endpoint-and-schema depth, plus a project answer rehearsed to two levels of follow-up.

Practice prompt ↗
07Solve out loud, under time
  • Do three timed problems at twenty-five minutes each in a plain editor with no autocomplete and no execution until the end, then tally separately the failures that were syntax and the ones that were approach, because those two numbers call for different fixes.
  • Narrate one solution from the first sentence, stating the approach and its complexity before writing any code, and rehearse the sentence you will use when you realise mid-solution that the approach is wrong.
  • Re-solve from blank the two problems you were slowest on this week and compare the times against the day they first appeared.

Deliverable: A recording of one fully narrated solution and a tally that separates syntax failures from approach failures.

Practice prompt ↗Worked solution ↗

Expand any day for tasks and deliverables. Your progress is saved on this device.

Keep one story where the bad call was yours rather than a dependency's or a manager's. Name the check that would have caught it, whether you added that check afterwards, and whether it has fired since. Answers that route blame outward end the conversation early; answers that end in a guardrail someone still relies on tend to open it up.

Tell me about your professional experiences.

medium
behavioural and engineering judgement

Tell me about your professional experiences.

Approach
  1. Close with what you would do differently, concretely.
  2. Give the blast radius: what could have broken, and what you measured.
  3. Name the disagreement and how you resolved it with evidence.
Follow-up
  • What would you do differently if you ran that again?
  • How did you know your change caused the improvement?

How does your experience align with our current tech stack?

medium
behavioural and engineering judgement

How does your experience align with our current tech stack?

Approach
  1. State the situation in two sentences and spend the rest on the reasoning.
  2. Close with what you would do differently, concretely.
  3. Name the disagreement and how you resolved it with evidence.
Follow-up
  • How did you know your change caused the improvement?
  • What did you decide not to do, and why?

Tell callers you do not own that their integration breaks

medium
deprecationcompatibilitystakeholders

A field in a write endpoint's response must change shape. You own the endpoint; you do not own the four internal callers or the outbound webhook consumers who read it. Describe a deprecation you were responsible for: what you shipped first, how you established who was actually reading the field, the window you gave and what set its length, what you did about the consumer who never moved, and how you decided removal was safe. Name the signal you used, not the announcement you sent.

Approach
  1. Establish the reader set empirically rather than from a wiki of owners: per-field usage counters keyed by principal, or access logs attributed to a consumer. State the blind spot of whichever you pick, since a consumer that reads the field only on a monthly job will not appear in a week of logs.
  2. Ship additive first. Populate the new field alongside the old one so no reader is forced to move, which is also what keeps a rolling deploy safe, because old and new instances answer the same requests at the same time and a rollback must still find the old shape present.
  3. Set the window from the slowest legitimate consumer's release cadence, not from your calendar, and decide separately what to do for a consumer with no release process at all, such as an external webhook endpoint you can only email.
  4. Convert silence into evidence before you rely on it: a short, low-traffic removal window that makes a still-dependent consumer fail visibly and loudly while you are watching, rather than at three in the morning after you have moved on.
  5. State the removal criterion as a measurement with a duration attached, such as observed reads at zero across a full billing cycle, and keep the change reversible for one release after removal.
Follow-up
  • How would you detect a consumer that reads the field only during a monthly export?
  • One caller refuses to move and has a commercial relationship behind it. What changes in your plan and what does not?
  • After removal, what makes the change irreversible, and how long before you cross that line?
  • 01

    Tell me about your professional experiences.

  • 02

    How does your experience align with our current tech stack?

  • 03

    A field in a write endpoint's response must change shape. You own the endpoint; you do not own the four internal callers or the outbound webhook consumers who read it. Describe a deprecation you were responsible for: what you shipped first, how you established who was actually reading the field, the window you gave and what set its length, what you did about the consumer who never moved, and how you decided removal was safe. Name the signal you used, not the announcement you sent.

PracHub interview preparation framework ↗
Is this an official Briza interview guide?

No. It is PracHub's own research and practice material for the Software Engineer role at Briza. Rounds and questions reflect what candidates have reported, not a process Briza has published, and they change over time. Confirm the current format and scope with your recruiter.

PracHub interview research ↗
How long does the entire process usually take?

The process typically moves at a steady pace, but timelines can vary based on team needs. You can generally expect the four-stage process to take a few weeks from the initial screen to a final decision.

PracHub interview research ↗
What is the best way to prepare for the technical challenge?

Focus on writing clean, readable code and practice explaining your logic out loud. Since the technical deep dive often involves pair programming, your ability to communicate your thought process is just as important as the code itself.

PracHub interview research ↗
Is the team culture collaborative?

Yes, Briza emphasizes a collaborative environment. Even in a remote setting, you will be expected to work closely with your peers, participate in design reviews, and contribute to a team-first culture.

PracHub interview research ↗
Sources & methodology 3 sources ↗

No official company page is cited. Rounds and questions come from candidate reports and PracHub editorial material; each source shows the date it was read.