As a Data Scientist at Capgemini Government Solutions, you play a pivotal role in transforming data into actionable insights that drive decision-making and improve service delivery for government clients. Your expertise in statistical analysis, machine learning, and data visualization equips teams to tackle complex challenges, ultimately enhancing the efficacy of programs and policies. This role is critical not only for the analytical rigor it demands but also for its strategic influence on projects that affect millions of citizens.
In this position, you'll be involved in diverse projects that span various domains, including public safety, healthcare, and urban planning. By leveraging advanced data techniques, you contribute to the development of predictive models, optimization algorithms, and data-driven applications that support government initiatives. The work is both challenging and rewarding, providing an opportunity to make a significant impact in the public sector through innovative data solutions.
Initial Screening
reportedWhoever runs this call is usually not a practitioner. They take notes, and a hiring manager skims those notes later, so the real question is whether your work survives being written down by someone outside the field. Test every project sentence against that: could a non-specialist repeat it correctly without knowing what a propensity score is? Carry a plain-language version of each project and one reason you want this particular role that you could not copy onto another application. Vagueness at this stage reads as inexperience, even when the underlying work was genuinely deep.
What to demonstrate
- Whether a non-specialist can restate your projects accurately, since their paraphrase is what reaches the hiring manager
- Whether your reason for wanting the role points at the work itself rather than the company's reputation
- Whether your language signals the level being screened for: what you decided yourself versus what you were handed
How to prepare
- Write a two-sentence, jargon-free version of each major project: the question nobody could answer, and the decision your work changed. Read it to someone outside data and have them repeat it back
- Point your 'why this role' answer at something concrete in the job description or the product surface you would be working on, and keep it to two sentences
- Have two questions ready about measurement: which metric the team is held to, and who acts on an analysis once it lands
Technical Assessments
reportedBefore anything else, this round is a reading test. You are given a small schema and a question phrased in business language, and most of the difficulty sits in the gap between them. Who counts as an active user, does a refunded order still count as an order, is that date column an event time or a load time. Weak answers start typing immediately and compute something precise about the wrong population. Strong ones pin the definition in one sentence, name the column that encodes it, then write the query. On a timed assessment with nobody to tell, write the definition in a comment anyway.
What to demonstrate
- Whether an ambiguous term becomes a specific column and filter before any computation happens
- Whether you read the schema for keys and cardinality rather than only for column names
- Whether the result answers the question at the grain it was asked at, per user or per session or per day
How to prepare
- Take three metrics you already use and write down the exact filter and exact grain behind each, then practise stating one of them in a single sentence out loud
- On a schema you have never seen, spend the first minute writing what one row of each table means and which key it is unique on, then predict which joins can duplicate rows
- Rehearse a version where the definition changes halfway through, and edit the query you have instead of starting over
Behavioral Interviews
reportedBehavioural answers from data candidates get audited in a way that answers from other roles do not. When you say a model lifted retention, the next question is the denominator, the window, and how you knew the lift was not seasonal. So attach the measurement to each claim while you tell it: what the metric was before, over what period, and against what comparison. Numbers with no baseline read as rounded-up memory, and one unsupported figure tends to make the rest of the story sound rehearsed.
What to demonstrate
- Whether each impact number arrives with a baseline, a window and a comparison, or as a bare percentage
- Whether you can name the method that attributed the effect to your work (an experiment, a staged rollout, a seasonal control) or concede the link was correlational
- Whether the magnitudes stay internally consistent when the interviewer multiplies them against the scale you described earlier
How to prepare
- For each story, write the impact line as metric, value before, value after, window, and how attribution was established. Any line missing two of those five is a follow-up you will answer badly.
- Re-derive one headline number from the source table rather than the deck that reported it. Resume numbers drift upward across retellings.
- Decide in advance which figures you cannot share, and prepare the ratio or relative change you can give instead, so a confidentiality limit does not read as evasion.
PracHub editorial advice for the preparation topics above.
Watching an experiment daily and stopping when it crosses significance
A fixed-sample test controls type I error at one pre-declared look. Checking repeatedly and stopping at the first p < 0.05 inflates the false positive rate to roughly 0.15 to 0.20 for ten looks, and it rises further with more frequent checks, because the p-value takes a random walk that will eventually dip below the threshold under the null. The usual defences are a fixed horizon declared before launch, group-sequential boundaries such as O'Brien-Fleming that spend alpha across a planned number of looks, or always-valid confidence sequences that are correct under continuous monitoring. Compounding it, the effect size reported conditional on having crossed the threshold is biased away from zero, and the bias is larger the lower the power was, so an underpowered test that 'won' typically overstates the lift it found.
Reading a pooled rate that moved because the mix moved, not because any behaviour changed
A pooled conversion rate is a weighted average, and a shift in the weights can move it in the opposite direction to every one of its parts. A paid campaign that brings low-converting traffic drops overall signup conversion even if desktop, mobile web and app conversion each rose that week, which is Simpson's paradox and it is the single most common cause of an inexplicable dashboard move. The discipline is to decompose before explaining: recompute the rate holding last period's segment weights fixed, and compare that counterfactual to the actual, so the mix effect and the rate effect are separated numerically rather than argued about. Segment on the dimensions that actually reweight, which in this domain are almost always device_type, referrer_channel, country and new versus returning.
Explaining an aggregate move without decomposing the mix shift
Split the change in the aggregate into within-segment movement and movement in segment weights before you explain it. Every segment's rate can fall while the overall rate rises, purely because volume shifted toward segments that already had higher rates.
Ignoring interference between units in a marketplace experiment
Ask whether one unit's treatment can change another unit's outcome through shared inventory, a matching pool, a social graph or a common budget. Where it can, randomise at a level that contains the spillover, such as region or time slice, and say explicitly what that costs you in statistical power.
Choose a category, try a prompt, then open its approach, worked solution or follow-up when you need it.
Write a function to perform a linear regression using Python.
Write a function to perform a linear regression using Python.
Approach
- Pick an evaluation metric that matches the cost of each error type, not a default.
- Say how the offline result would be validated online before it is trusted.
- Set a baseline first, so any model has something honest to beat.
Follow-up
- What would you monitor after launch to know the model is still valid?
- How would you choose the decision threshold, and who owns that choice?
What evaluation metrics would you use to assess a classification model…
What evaluation metrics would you use to assess a classification model?
Approach
- Frame the prediction: the label, the moment of prediction, and the action it triggers.
- Pick an evaluation metric that matches the cost of each error type, not a default.
- Set a baseline first, so any model has something honest to beat.
Follow-up
- What would you monitor after launch to know the model is still valid?
- Where could label leakage enter this setup?
Split a pooled conversion drop into rate and mix
You have weekly visit-to-signup counts by segment: a DataFrame with week, device_type, referrer_channel, visitors and signups. The pooled rate fell 0.84 percentage points between two consecutive weeks while several individual segments rose. Write a function that, for a caller-supplied list of segment columns, splits the pooled change into a rate effect, a mix effect and an interaction term that sum exactly to the observed change. Return those three scalars plus a per-segment contribution table sorted by absolute contribution, so the largest single driver can be named.
Approach
- State the algebra before coding: the pooled rate is r = sum over segments of w_s * r_s, with w_s the segment's share of the denominator. Then r1 - r0 decomposes exactly into sum(w_s0 * (r_s1 - r_s0)) for rate, sum((w_s1 - w_s0) * r_s0) for mix, and sum((w_s1 - w_s0) * (r_s1 - r_s0)) for interaction. The identity is per-segment, so it holds for any numbers you put in the four slots.
- Pivot both weeks onto a common segment index with an outer join so a segment that appeared or vanished is kept rather than dropped, then decide what rate to give a segment with no visitors in one of the weeks, and document the choice. The identity stays exact either way because the missing week's weight is 0, but the attribution does not. Filling the missing rate with 0 sends an appearing segment's entire w_s1 * r_s1 into the interaction term, since w_s0 = 0 makes both the rate term and the mix term (w_s1 - w_s0) * r_s0 identically zero; a vanishing segment then splits as -w_s0 * r_s0 in rate, -w_s0 * r_s0 in mix and +w_s0 * r_s0 in interaction.
- The convention used below instead imputes the missing week's rate as that week's pooled rate. A vanishing segment then lands wholly in mix at -w_s0 * r_s0, with rate and interaction cancelling; an appearing segment puts w_s1 * r_pooled0 in mix (volume arriving at the average rate) and only w_s1 * (r_s1 - r_pooled0) in interaction (its rate differing from that average). Impute by which week the segment is missing from, never by argument order, or the swap identities below stop holding.
- Guard the division where visitors is 0 so no NaN enters the vectors, because a single NaN poisons every sum. A segment with zero visitors in both weeks contributes exactly 0 and can be dropped; a segment missing from only one week does not contribute 0, and where its contribution lands is settled by the convention above, not by the guard.
- Compute the three components as vectors over segments, then sum. Keep the vectors, because the per-segment contribution table is what turns the decomposition into an explanation.
- Assert that the three components sum to the observed pooled change within floating-point tolerance. This identity is exact, so a mismatch means an implementation bug, not a modelling judgement.
Worked solution 25 min
- Aggregate to one row per (week, segment tuple) with summed visitors and signups, then split into w0 and w1 frames and align with an outer join, filling missing visitors and signups with 0.
- Compute w_s = visitors / visitors.sum() within each week, and r_s = signups / visitors only where visitors > 0. Where a week's visitors are 0, set that week's r_s to that week's pooled rate, the stated convention; never leave it NaN.
- rate_effect = (w0 * (r1 - r0)).sum(); mix_effect = ((w1 - w0) * r0).sum(); interaction = ((w1 - w0) * (r1 - r0)).sum().
- contribution = w0*(r1-r0) + (w1-w0)r0 + (w1-w0)(r1-r0) per segment, which reduces to w1r1 - w0r0; sort by abs and return the head.
- assert abs(rate + mix + interaction - (pooled1 - pooled0)) < 1e-12.
Follow-up
- The mix effect accounts for 0.71 of the 0.84 point drop, driven by paid_social volume. What is your recommendation, and what would change it?
- Why is a two-way split into a counterfactual rate and a residual also exact, and when would you prefer it to the three-way version?
- Segmenting on device and channel leaves a large interaction term. What does that tell you about the choice of segments?
Given a list of integers, find the two numbers that sum to a specific …
Given a list of integers, find the two numbers that sum to a specific target.
Approach
- Check whether any join is one-to-many before aggregating, or the sums inflate.
- Compute rates by summing numerator and denominator separately, never by averaging rates.
- Say which table is the grain you start from, and join outward from it.
Follow-up
- How would you verify this result without re-running the same query?
- What breaks if events arrive late or out of order?
What is the time complexity of quicksort?
What is the time complexity of quicksort?
Approach
- Compute rates by summing numerator and denominator separately, never by averaging rates.
- Handle the rows that do not match: a LEFT JOIN with a NULL check is usually the question.
- Check whether any join is one-to-many before aggregating, or the sums inflate.
Follow-up
- What breaks if events arrive late or out of order?
- How would you verify this result without re-running the same query?
Attribute account MRR to first-touch channel without seat fan-out
dim_user holds user_id, account_id, first_touch_channel, account_created_at_utc. dim_account holds account_id, lifecycle_status. fct_subscription_period holds account_id, period_start_utc, period_end_utc, period_status, mrr_cents_constant_fx. For a given as-of date, report active MRR by the first-touch channel of the account's earliest-created user. An account has many users and many periods. The channel totals must sum exactly to total active MRR on that date, and accounts whose label is NULL must appear as their own bucket.
Approach
- Reduce the label side to one row per account before any join: ROW_NUMBER() OVER (PARTITION BY account_id ORDER BY account_created_at_utc, user_id) = 1 over dim_user, carrying first_touch_channel. Joining dim_user to the period table directly repeats each revenue row once per seat.
- Reduce the money side to one row per account too: the period where period_start_utc <= :as_of AND period_end_utc > :as_of AND period_status IN ('active','past_due'). If more than one row survives that filter the account holds overlapping subscriptions, which must be deduped or deliberately summed, and either way the choice is stated rather than left to the join.
- Join the two one-row-per-account CTEs and SUM(mrr_cents_constant_fx). Use the constant-FX column, since the same query run in two quarters otherwise reports currency moves as channel performance.
- Bucket NULL first_touch_channel as 'unattributed' with COALESCE instead of letting it drop. Roughly the share of users with no observed touch is not small, and dropping it understates the total and inflates every named channel's share.
- Reconcile: the SUM over the joined result must equal the SUM over the period CTE alone. That single equality check catches fan-out immediately, which is why it is worth writing before presenting the number.
Worked solution 30 min
- Compute total active MRR on the as-of date from the period table alone and write the number down as the target.
- Build the label CTE and assert COUNT(*) = COUNT(DISTINCT account_id).
- Build the as-of period CTE and assert the same, investigating any account with more than one surviving row.
- Join, COALESCE the channel, aggregate, and compare the total to the target.
- Deliberately run the naive dim_user join and record the inflation factor, which is the MRR-weighted mean seat count.
Follow-up
- Which user should own the account's label: earliest created, the 'owner' role, or the one who converted? What does each choice systematically favour?
- What does this table entitle you to say about the value of a channel, and what does it not?
- Some accounts have a parent_account_id. How does rolling those up change both the numerator and the channel mix?
Discuss how you would evaluate the impact of a new public policy using…
Discuss how you would evaluate the impact of a new public policy using data.
Approach
- Name one primary metric, then the guardrail that stops it being gamed.
- Decompose the metric into the rates that drive it, and say which one you would check first.
- State what result would change your recommendation, so the answer is falsifiable.
Follow-up
- Which segment would you cut first, and what would that rule out?
- What would you do if the primary metric and the guardrail moved in opposite directions?
Given a dataset on public health, how would you identify key trends an…
Given a dataset on public health, how would you identify key trends and insights?
Approach
- State what result would change your recommendation, so the answer is falsifiable.
- Restate the decision this analysis has to support, and who acts on the answer.
- Name one primary metric, then the guardrail that stops it being gamed.
Follow-up
- Which segment would you cut first, and what would that rule out?
- What would you do if the primary metric and the guardrail moved in opposite directions?
How do you prioritize your tasks when working on multiple projects?
How do you prioritize your tasks when working on multiple projects?
Approach
- Fix the population and the time window before naming any metric.
- State what result would change your recommendation, so the answer is falsifiable.
- Decompose the metric into the rates that drive it, and say which one you would check first.
Follow-up
- How would you detect that the metric is being gamed rather than genuinely improving?
- What would you do if the primary metric and the guardrail moved in opposite directions?
Propose a solution for a data integration challenge faced by a governm…
Propose a solution for a data integration challenge faced by a government department.
Approach
- State what result would change your recommendation, so the answer is falsifiable.
- Restate the decision this analysis has to support, and who acts on the answer.
- Name one primary metric, then the guardrail that stops it being gamed.
Follow-up
- Which segment would you cut first, and what would that rule out?
- What would you do if the primary metric and the guardrail moved in opposite directions?
How would you handle missing data in a dataset?
How would you handle missing data in a dataset?
Approach
- Say what you would check first and why it is the highest-information step.
- Clarify what is being asked and what a complete answer would contain.
- Work from the decision backwards to the evidence you would need.
Follow-up
- How would you know your answer was wrong?
- What assumption would you test first?
Measure whether self-serve help actually answered the question
A help widget opens in-product. Leadership asks for the percentage of users who got their answer. You have fct_event (event_name, user_id, session_id, occurred_at_utc, is_core_action, properties JSONB carrying article_id), fct_session, and a support ticket table joined on user_id. Nothing records whether the answer was correct or whether the user was satisfied, and no such field is being added. Propose the metric you would publish, state the proxy plainly, name the direction and rough size of its bias, and say which decisions it can and cannot support. Deliverable: the definition plus the bias statement.
Approach
- Say first that the target quantity is unobserved and will stay unobserved: nothing in the stream distinguishes a user who was helped from one who gave up, and both leave the same trace, so every candidate metric here is a proxy and the only question is which bias you prefer.
- Build the proxy to remove the largest identifiable error: among widget-open sessions, the share with no ticket from that user within 72 hours and at least one is_core_action = TRUE event after the widget opened in the same session. The downstream action requirement strips out most of the silent abandonment that a no-ticket rule alone scores as success.
- State the residual bias with a direction and a bound: it still over-counts, because a user who gave up and went elsewhere files no ticket and may still complete an unrelated core action later in the session; bound it using the observable population of widget-open sessions that end within two minutes with no further event.
- Publish a directly-measured companion with its own weakness in the same sentence: article thumbs up/down reported with its response rate, and the note that a single-digit response rate missing non-randomly toward annoyed users is exactly why it cannot be the headline.
- Write the use statement, because a proxy without one gets reused for the wrong decision: valid for ranking articles against each other and for detecting a week-on-week break, invalid as an absolute deflection rate or as an input to a cost-saved figure.
Worked solution 25 min
- Write the unobservable target in one sentence with the observable set beside it, so the gap is visible on the page rather than assumed away.
- Define the published proxy with exact numerator and denominator, including the session scoping of the downstream core action.
- Bound the bias from data you already have: compute the share of widget-open sessions ending within two minutes with no further event.
- Publish the thumbs signal beside it with its response rate and the direction of its missingness.
- Write the two-line use statement covering what the number supports and what it does not.
Follow-up
- How would you validate this proxy once, and what would you do if the validation said it over-counts by 20 points?
- Support asks for a dollars-saved number from this metric. What do you say, and what would you need before saying anything else?
- Ticket volume drops the week support hours change. How do you keep that out of the series?
Decide whether a one-day core-action drop is real
A daily dashboard counts distinct fct_event.user_id with is_core_action = TRUE, filtered on occurred_at_utc, and is read at 09:00 UTC. This morning it shows yesterday down 22% against the day before. fct_event is partitioned on received_at_utc. You have fct_event, fct_session and dim_user with thirteen months of history. Deliver a one-paragraph verdict, escalate or do not escalate, with the evidence that settles it, before anyone proposes a product hypothesis.
Approach
- Identify which two weekdays the comparison actually spans, then pull the same weekday-pair transition for the last 52 weeks and place the observed 22% inside that distribution. A day-over-day comparison in a product with a weekday pattern is a comparison of two different populations, so the reference class is the same transition historically, not the prior day.
- Measure partition completeness rather than assuming it. For each of the last 30 days compute the share of that day's occurred_at_utc rows that had landed by 09:00 UTC the following morning, split by surface; mobile clients buffer events offline, so the freshest partition is systematically short and the shortfall is not uniform across surfaces.
- Recompute the same series keyed on received_at_utc. If the drop survives on both keys it is not a lateness artefact; if it exists only on occurred_at_utc it is the partition filling in.
- Check the two exclusion flags before segmenting anything: a change in is_bot_flagged coverage or a batch of is_internal accounts entering or leaving moves a distinct-user count with no user behaviour behind it.
- Only if the movement survives all of the above, begin the segment decomposition. Say explicitly in the verdict which of these four checks the movement passed, so the next reader does not repeat them.
Follow-up
- What publication lag would you set for this dashboard, and how would you derive the number rather than pick it?
- If you switch the metric to received_at_utc, what does that break for anyone comparing to historical figures?
- How would you detect the same problem automatically, so a human does not have to notice it each morning?
For someone who has spent the last year in notebooks, dashboards or modelling work and has not written raw SQL under time pressure. The first four days rebuild query fluency against a fixture you control and can verify by hand; the last three attach that fluency to the rest of the loop.
Prepare, practise & reflect
One practical outcome each day. Spend longer where you need it.
0 / 7 done01Build a fixture you can check answers against
- Create a local Postgres or SQLite database with four tables (users, sessions, events, orders) holding roughly 200 rows you generated yourself, so you know the contents well enough to predict every result.
- Deliberately seed the cases that break queries: a user with no sessions, a session with no events, two orders sharing a timestamp, a NULL in one join key, and one duplicated user row.
- Before writing any SQL, hand-compute five answers on paper (how many users placed at least one order, median orders per ordering user, and three others) and save them as the ground truth for the week.
Deliverable: A one-command seed script plus a text file of five hand-computed answers to grade every later query against.
Practice prompt ↗Practice prompt ↗Practice prompt ↗Worked solution ↗02Joins, filters and NULL semantics
- Answer "which users have no orders" three ways (LEFT JOIN with IS NULL, NOT EXISTS, NOT IN) and confirm that the NOT IN version returns zero rows once the subquery contains a NULL, because the comparison is never TRUE.
- Reproduce the LEFT JOIN that silently collapses to an inner join by putting a right-table predicate in WHERE, then fix it by moving the predicate into the ON clause, and record both row counts.
- Create a fan-out bug on purpose by joining orders to order_items and summing the order total, then correct it with a pre-aggregated subquery and explain in one line which table changed the grain.
Deliverable: One annotated .sql file holding the three join traps, each with the wrong result and the corrected result side by side.
Practice prompt ↗Practice prompt ↗Practice prompt ↗03Window functions and frames
- Write three window queries against the fixture: a running order total per user, the rank of each order within its user by value, and the day gap to that user's previous order, then check each against the day-one ground truth.
- Run ROW_NUMBER, RANK and DENSE_RANK over a column containing ties, print all three side by side, and write one sentence on when each is the correct choice.
- Switch one query from the default frame (RANGE BETWEEN UNBOUNDED PRECEDING AND CURRENT ROW, which is what you get when ORDER BY is present and no frame is written) to ROWS BETWEEN UNBOUNDED PRECEDING AND CURRENT ROW, and explain why the output differs only when the ORDER BY column has duplicates.
Deliverable: Three verified window queries plus a short note explaining the RANGE versus ROWS difference in your own words.
Practice prompt ↗Practice prompt ↗04The four analytical query patterns
- Write a monthly retention grid: first order month per user, then months-since-first as the column, and verify that month zero equals the cohort size exactly.
- Sessionize the events table under a 30-minute inactivity rule using LAG plus a cumulative sum over a new-session flag.
- Build a four-step funnel that counts distinct users rather than events at each step, and state the rule you applied to a user who reaches step three without ever logging step two.
Deliverable: One file with the retention, sessionization and funnel patterns, each carrying a one-line note on the assumption it bakes in.
Practice prompt ↗Practice prompt ↗Worked solution ↗05Write SQL the way you will have to write it live
- Set a 12-minute timer and solve three medium prompts in a plain editor with no execution and no autocomplete, then run them and tally syntax errors separately from logic errors.
- Narrate one solution aloud while writing it, stating the grain of each intermediate result (one row per user, one row per user-day) before you type its body.
- Rewrite your slowest solution as a CTE chain where every CTE name states its grain, and time yourself re-solving it from blank.
Deliverable: A recording of one narrated solution plus an error tally that separates syntax from logic.
Practice prompt ↗Practice prompt ↗06One day for everything that is not SQL
- Write the preconditions of the two-sample t-test from memory, then check them: independent observations, and a difference in means whose sampling distribution is approximately normal, which at large sample sizes follows from the central limit theorem rather than from normality of the raw values.
- Write the difference between an odds ratio from logistic regression and a relative risk, and state the condition under which the two are close (low outcome prevalence).
- Prepare a 90-second answer to "how would you know this model is any good" that names the metric, the baseline you would beat, and the cost of the errors you care about.
Deliverable: One page of notes covering test preconditions, the odds-ratio caveat and the model-quality answer.
Practice prompt ↗Practice prompt ↗07Full loop rehearsal
- Run a 45-minute mock with someone willing to interrupt: 20 minutes of SQL, 15 minutes defining a metric, 10 minutes on a past project.
- Re-solve from blank the two queries you were slowest on this week and compare the times against day five.
- Write a five-line answer to "walk me through a project" that puts a number in the first sentence and names the decision the work changed.
Deliverable: Mock feedback notes plus a timed project narrative you can deliver without reading it.
Practice prompt ↗Practice prompt ↗Worked solution ↗Expand any day for tasks and deliverables. Your progress is saved on this device.
Most of the questions in this section reduce to one thing: can you be handed a vague request and come back with something useful? Prepare an example where the ask was underspecified, you chose an interpretation, and you said out loud which interpretation you chose. Describing how you narrowed the question matters more than the technique you eventually used.
Describe a time you faced a significant challenge in a project. How di…
Describe a time you faced a significant challenge in a project. How did you overcome it?
Approach
- Name the disagreement or constraint, and how you resolved it with evidence.
- State the situation in two sentences and spend the rest on your reasoning.
- Close with what you would do differently, concretely.
Follow-up
- What did you decide not to do, and why?
- How did you know the outcome was caused by your change?
Defend a flat experiment readout against a post-hoc segment
A feature you evaluated is flat on seven-day activation: +0.05pp with a 95% interval of [-0.47pp, +0.57pp], from 61,000 exposed users per arm in fct_experiment_exposure joined to dim_user and fct_event. Baseline activation is 32%. The launch team asks you to drop every surface except mobile_web, where the point estimate is +1.1pp, and re-run. You have ten minutes in their planning meeting. Deliver a spoken position: what you will and will not do, and the decision you recommend.
Approach
- Recognise what is being probed: whether you hold a statistical position under social pressure without becoming either rigid or apologetic. A generic answer says the segment is not significant; a strong one separates the request into a question that is answerable (is the mobile_web number real?) and one that is not (can we ship on it?), and answers both.
- Price the multiplicity out loud. The slice was chosen after seeing the results, so its estimate is selected on favourable noise and is biased away from zero. With k independent looks at a nominal 5% level, the chance of at least one false positive is 1 - 0.95^k: 26% at six segments, 64% at twenty. Quote the k you actually inspected, not the k you reported.
- Use the arithmetic already in front of you. On the point estimates, a +1.1pp mobile_web effect combined with a pooled +0.05pp implies the remaining surfaces average negative in proportion to mobile_web's share of exposures. State that as a testable implication of their story rather than as a rebuttal of it.
- Ask the one question that settles the category: was mobile_web named in the analysis plan before launch? If it was, it is a planned comparison and gets a corrected reading. If it was not, it is a hypothesis, and the honest move is to size the test that would confirm it.
- Convert the refusal into a cost. Size a mobile_web-only confirmatory test at the claimed effect, state the weeks of mobile_web traffic it needs, and close with the recommendation: do not ship this as a lift, and note that the interval already rules out anything at or above +0.6pp, which is itself a useful input to the roadmap.
Follow-up
- The confirmatory test you sized needs nine weeks of mobile_web traffic and the team has three. What do you recommend instead?
- Suppose mobile_web was pre-registered. How does your reading change, and what correction do you apply?
- Your interval excludes +0.6pp. Is that the same as saying the feature does nothing?
Handle a request for numbers supporting a decision already made
A senior leader has already decided to sunset a plan tier and asks you for the analysis showing it is the right call. Accounts on that tier carry 6% of MRR at constant FX and have the highest licensed-seat utilisation in the book. The leader's support matters to your next review cycle, and the decision is being presented in four days. Deliver what you produce, what you decline to produce, and the exact sentence you will say in the meeting where the number appears on a slide.
Approach
- Recognise what is being probed: whether you can find the legitimate request inside an illegitimate framing instead of either complying or refusing on principle. The generic answer promises to push back; the strong one produces something genuinely useful and states its limits in the room, without ambushing anybody.
- Separate the decision from the justification. Sunsetting the tier may be correct for reasons the data does not hold, such as support cost, roadmap surface area or sales motion. What you decline is a one-sided document. What you produce is the case read both ways, which also happens to be more useful to the leader.
- Build the symmetric analysis: MRR at risk at constant FX, the share of affected accounts with a plausible migration path given seats_licensed and billing_term, the recovery rate assumed for that migration and where it came from, and the downside case in which high-utilisation accounts treat the sunset as a reason to re-evaluate the vendor entirely.
- Surface the inconvenient fact privately and early. The highest seat utilisation in the book is a retention signal, and the leader should hold it before the room does, so they can incorporate it rather than be caught by it.
- Agree the meeting sentence in advance with the leader, so that nobody is surprised. Something to the effect that the tier is 6% of MRR and its accounts are the most heavily used in the book, and that the case for sunsetting rests on cost and focus rather than on revenue. That is true, it supports the decision on its real grounds, and it stops the deck claiming the numbers endorse it.
- Decide your own line before you need it: what you will not put your name to, and that the route if asked anyway is your own manager rather than a confrontation in the meeting.
Follow-up
- The deck circulates with your analysis included and the downside case removed. What do you do, and by when?
- What changes if the honest analysis says the sunset is clearly the wrong call?
- How do you write the same memo when the leader is your skip-level and the meeting is tomorrow?
- 01
Describe a time you faced a significant challenge in a project. How did you overcome it?
- 02
A feature you evaluated is flat on seven-day activation: +0.05pp with a 95% interval of [-0.47pp, +0.57pp], from 61,000 exposed users per arm in fct_experiment_exposure joined to dim_user and fct_event. Baseline activation is 32%. The launch team asks you to drop every surface except mobile_web, where the point estimate is +1.1pp, and re-run. You have ten minutes in their planning meeting. Deliver a spoken position: what you will and will not do, and the decision you recommend.
- 03
A senior leader has already decided to sunset a plan tier and asks you for the analysis showing it is the right call. Accounts on that tier carry 6% of MRR at constant FX and have the highest licensed-seat utilisation in the book. The leader's support matters to your next review cycle, and the decision is being presented in four days. Deliver what you produce, what you decline to produce, and the exact sentence you will say in the meeting where the number appears on a slide.
Is this an official Capgemini Government Solutions interview guide?
No. It is PracHub's own research and practice material for the Data Scientist role at Capgemini Government Solutions. Rounds and questions reflect what candidates have reported, not a process Capgemini Government Solutions has published, and they change over time. Confirm the current format and scope with your recruiter.
PracHub interview research ↗How difficult is the interview process for a Data Scientist at Capgemini Government Solutions?
The interview process is generally considered rigorous, with an emphasis on both technical and behavioral assessments. Candidates should invest adequate preparation time, ideally several weeks, to practice coding and review data science concepts.
PracHub interview research ↗What differentiates successful candidates from others?
Successful candidates often demonstrate a strong technical foundation, effective communication skills, and the ability to work collaboratively. They also show a deep understanding of how their work can impact government services.
PracHub interview research ↗What is the typical timeline from initial screen to offer?
Candidates can expect a timeline of 2-4 weeks from the initial screening to receiving an offer, depending on the specific team and role.
PracHub interview research ↗Is remote work an option for this position?
While some roles may offer remote or hybrid work options, it is essential to clarify this with your recruiter, as availability can vary based on project requirements.
PracHub interview research ↗Sources & methodology 3 sources ↗
No official company page is cited. Rounds and questions come from candidate reports and PracHub editorial material; each source shows the date it was read.
- 01PracHub interview research ↗
PracHub editorial research into this company and role, maintained with this guide. Candidate-reported, not an employer publication.
PracHub page · Accessed 2026-09-22 - 02PracHub Data Scientist practice ↗
Cross-company practice questions for this role.
PracHub page · Accessed 2026-09-22 - 03PracHub interview preparation framework ↗
The framework the preparation plan follows.
PracHub page · Accessed 2026-09-22
Explore related engineering environments and compare the preparation focus.
Fetch Rewards Data Scientist Interview Questions & Guide 2026
Product-sense practice for a Fetch Rewards data scientist interview: define a product and business analytics metric, pick its guardrails, and argue why a tempting alternative would mislead you.
1 digit technology Pvt Data Scientist Interview Questions & Guide 2026
Take-home style practice for data scientists preparing for 1 digit technology Pvt: a messy dataset, a fixed time budget, and a written analysis, reviewed for whether it states its assumptions and whether a reader could reproduce your number
xAI Data Scientist Interview Questions & Guide 2026
Communication practice for xAI data scientist candidates: turn an analysis into a recommendation, name the uncertainty honestly, and answer the follow-up a skeptical stakeholder will raise.
Windfall Data Scientist Interview Questions & Guide 2026
Data-quality drills for Windfall data scientist prep: survivorship and selection bias, leakage through time-ordered features, and extreme values where provenance decides the call. A logging fault or unit slip gets corrected or dropped; a ge