A Software Engineer at Devtech is a technical contributor responsible for building scalable, high-performance solutions that drive Devtech's digital service offerings. You will sit at the intersection of complex backend architecture and client-facing requirements, ensuring that the systems Devtech deploys are both robust and maintainable. This role is not merely about writing code; it is about architectural stewardship and engineering excellence.
Your impact will be felt across Devtech's core product suites, where you will engage with modern frameworks to solve intricate business problems. Whether you are optimizing Web APIs, refining database queries, or implementing design patterns, your work will directly influence the reliability and efficiency of Devtech's technical ecosystem. The role calls for engineers who possess a deep curiosity about how systems interact and who are committed to delivering high-quality, clean code.
HR-led Discussion
reportedYou cannot drill a format you do not know, so put the preparation into material that travels. Three pieces of your own work, each rehearsed until you can take a follow-up you did not anticipate, will carry a conversation or a code walkthrough equally well. Specificity is what separates that from filler. A number needs its definition before it means anything: a p99 is over some window and measured at some hop, and a server-side figure excludes the queueing and network time a client would see. The number you cannot qualify is the one to leave out.
What to demonstrate
- Whether your examples carry detail only someone who did the work would hold, such as what the binding constraint actually was, which alternative you rejected and why it was worse, and what you measured on each side of the change
- Whether a number survives one follow-up, meaning you can say what it was measured over and whether it moved because of your change or merely alongside it
- Whether a failure is described with the specific change that followed it, rather than a lesson stated in general terms
- Whether your part in a team effort is stated accurately, including what other people did
How to prepare
- Write a page on each of three projects covering the constraint, the option you rejected, the measurement before and after, and what went wrong. Cut any line you cannot take a follow-up on, since you are writing the parts you will be pressed on rather than a summary.
- Recover the real figures while you still have access: request volume, data size, latency with its percentile and window, team size, timeline. Note where each came from, whether a dashboard, a design document or memory, and mark the estimates so you can say which they are out loud.
- Take your weakest project story to someone who works in a different area and have them ask why four times in succession. The point where you run out of answer is the part to go and re-read before the round.
Technical Deep-Dive
reportedMost of the time lost in this format is not lost to thinking. It goes to a standard-library call you half-remember, an off-by-one in a loop bound, and a debugging loop that mutates code at random until something passes. When output is wrong, stop re-reading the whole function: take the smallest input that reproduces it and walk the state through by hand, printing intermediates if the environment allows. Guessing at a fix without a failing case you understand is how a five-minute bug becomes twenty, and the clock does not pause while you do it.
What to demonstrate
- Whether you reach the right structure without a detour, and can write it from memory rather than only recall that one exists
- Whether overflow is considered where the language has fixed-width integers, since a signed 32-bit value stops at 2,147,483,647 and then wraps in Java, is undefined behaviour in C++, and does not arise in Python, whose integers grow instead
- Whether recursion depth is treated as a constraint on large inputs, given that CPython's default limit is 1000 frames and a deep recursion can exhaust the stack in any language where an iterative version would not
- Whether a failing case is isolated and explained before any edit is made to the code
How to prepare
- From an empty file and with no references open, implement the pieces you lean on most: a heap push and pop, an iterative DFS with an explicit stack, and a binary search whose midpoint is written lo + (hi - lo) / 2, which avoids the overflow that (lo + hi) / 2 can hit in a fixed-width integer type
- Time yourself on the ten library calls you look up most, such as sorting with a custom comparator, splitting and joining strings, and finding the next key at or above a value in an ordered map, until the lookup is gone
- Take a solution you know is broken and, before touching it, write one sentence naming the input, the expected value and the actual value. Repeat until you do it without deciding to.
PracHub editorial advice for the preparation topics above.
Letting a slow dependency consume unbounded concurrency
The failure that takes a service down is usually not an error but a delay. A dependency answering in thirty seconds instead of fifty milliseconds holds each request's worker or connection six hundred times longer, and since required concurrency is arrival rate times latency, a fleet sized for sixty in-flight requests now needs thirty-six thousand to sustain the same rate - so it queues, and requests whose clients have already abandoned them still occupy resources. Retries make it precisely worse: a policy of three attempts triples the load on a dependency at the exact moment it is least able to serve, which is how one slow dependency becomes an outage of everything sharing that pool. Containment is four specific things - a timeout on every outbound call shorter than the caller's remaining budget, a bounded pool per dependency so one cannot starve the others, backoff with full jitter rather than a fixed delay so retries do not resynchronise, and a circuit that stops sending once the failure rate makes an attempt pointless.
Paginating with LIMIT/OFFSET over a set that changes while the client is reading it
OFFSET n makes the database produce and discard n rows before returning anything, so the cost of a page grows with its depth rather than with its size and page 500 costs five hundred pages of work. The correctness problem is worse than the cost: if a row is inserted or reordered between two page fetches, rows shift across the offset boundary and are either skipped entirely or returned twice, and neither outcome leaves any trace in the response for the client to detect. Keyset pagination - WHERE (sort_key, id) < ($last_sort_key, $last_id) ORDER BY sort_key DESC, id DESC LIMIT n, backed by an index in exactly that order - reads only the rows it returns and is stable against concurrent inserts. It requires the tie-break column: a timestamp is not unique, and duplicate sort keys straddling a page boundary reintroduce the skip it was adopted to remove.
Not asking what the system looks like if it dies halfway through
For any multi-step write, say what state remains if the process stops between step two and step three, and what brings it back: a single transaction, a saga with compensating actions, an outbox, or a reconciliation job. Partial failure is routine at any real call volume, so 'that shouldn't happen' is an answer with nothing behind it.
Finishing a solution without stating its complexity
Give time and space in the same breath as the code, and define n explicitly when there are two sizes, since n nodes and m edges are not interchangeable. Space is the half that gets skipped: count the auxiliary structures you allocate and the recursion stack at its deepest, not only the answer you hand back.
Choose a category, try a prompt, then open its approach, worked solution or follow-up when you need it.
Track a rolling failure rate per destination for circuit decisions
The egress service delivers about 1,500 webhooks per second across roughly 40,000 destinations, each call bounded by a 10 second timeout. Maintain, per destination, the failure rate over the trailing 60 seconds so a caller can ask before dispatch whether the circuit should open. Attempts arrive as (destination_id, finished_at_ms, outcome). Requirement: amortised O(1) per attempt, with total memory bounded by the destination count rather than by traffic. Give the structure, its exact memory, and the rule that stops a destination with three attempts from opening a circuit.
Approach
- Name the exact-deque version and then reject it as the default. Holding timestamps and advancing a tail pointer past anything older than now minus 60 seconds is a correct two-pointer window at amortised O(1) per attempt, but its memory tracks in-window traffic, so one destination in a retry storm holds hundreds of thousands of entries while thousands of quiet destinations hold none.
- Use a ring of 60 one-second buckets per destination, each bucket a pair of counters for attempts and failures. On an attempt, advance the ring by the elapsed whole seconds, zeroing at most min(elapsed, 60) buckets, then increment the head. That is amortised O(1) with a fixed footprint per destination.
- State the footprint: 60 buckets times two 4-byte counters is 480 bytes of payload per destination, so 40,000 destinations is roughly 20 to 25 MB with per-entry overhead, bounded by the catalogue rather than by the rate. The cost is granularity, since the oldest bucket ages out in whole seconds, which is far tighter than the decision needs.
- Require a minimum sample before the circuit may open. A destination with three attempts and three failures reads as 100 percent and is not evidence; a floor of roughly 20 attempts in the window makes the ratio meaningful, and below that floor use a run of consecutive failures as the trigger instead.
- Expire idle destinations, or memory grows with every destination ever seen rather than with the live set. Hold the rings in a bounded LRU keyed on destination_id and treat a miss as no history, which is the correct default for an endpoint that has been silent for a minute.
- Keep the half-open probe out of the window arithmetic. After the circuit opens, one probe per interval decides whether to close it, and folding that single success into a window that still holds a 100 percent failure history would reopen the destination on one data point.
Follow-up
- The fleet is 30 instances and each sees roughly a thirtieth of a destination's traffic. Where does the rate actually live, and what does a per-instance answer get wrong?
- A destination answers in 9.5 seconds and succeeds. It is not failing but it is consuming your per-destination concurrency. What signal should open the circuit here?
- How would you make the window survive a process restart, and is it worth the cost?
Diff a projection against the primary without per-row point reads
The listing projection has drifted and some rows show a stale version. The primary holds 40,000,000 resource rows across 12,000 tenants while serving 1,200 writes and 14,000 reads per second. The obvious repair, reading each resource row and comparing its version against the projection, is correct and would eventually finish. Explain precisely why it is unacceptable here, then give a diff that finds the differing rows, state its complexity, and make it safe to run against a live primary. Replication lag is usually under 100 ms and is not bounded.
Approach
- Quantify the naive cost rather than calling it slow: 40,000,000 point reads at even 0.5 ms each is over five hours serialised, and the only lever is concurrency, which is exactly what you cannot spend. The primary's pool is sized for the write path, and 40,000,000 random reads evict the buffer cache that sustains the 85 percent cache hit rate, so the audit degrades the system it is auditing.
- Replace random access with one ordered pass per side. Both sides can be read in (tenant_id, resource_id) order, which is a sequential scan on each and a merge join in O(n) time and O(1) memory. For a dense diff that is the whole answer, and it reads the primary once instead of 40,000,000 times.
- For the expected sparse case, compare range hashes instead of rows: partition the key space, compute per range an order-independent aggregate over hash(resource_id, version), compare aggregates, and descend only into ranges that differ. With d differing rows and branching factor B, at most d ranges mismatch per level, so the drill-down examines O(d log_B(n/d)) ranges and reads full rows only in mismatching leaves.
- Aggregate with a sum modulo 2^64 or a multiset hash, never XOR. XOR is order-independent but self-cancelling, so two rows wrong in the same way, or a row duplicated on one side, leave the range aggregate matching and the range is declared clean.
- Pin the comparison to a point in time or it reports lag as drift: consider only rows whose updated_at is older than now minus a lag margin, and re-check each candidate mismatch individually before repairing. At 1,200 writes per second a diff without this reports thousands of false positives, and an unattended repairer would then overwrite live rows with stale values.
- Make the run resumable and throttled: batch by range key, persist the last completed range, and watch a signal such as replica lag or primary CPU, pausing rather than pressing on. A reconciliation that cannot be stopped and resumed gets killed halfway and restarted from zero, which is how a repair becomes an incident.
Worked solution 35 min
- Compute the naive cost explicitly at 40,000,000 reads and 0.5 ms each, then at 100 concurrent, and state what those connections do to a pool already carrying 1,200 writes per second.
- Write the merge-join version over (tenant_id, resource_id) and state its memory.
- Define the range aggregate: the range key, the per-row hash input, and the combining function, with one sentence excluding XOR.
- Work an example with 40,000,000 rows, branching factor 256 and 5 differing rows, and count the ranges examined.
- Add the watermark filter and the resume point, and name the throttle signal the loop watches.
Follow-up
- The diff reports 900 stale rows. How do you decide between patching those rows and rebuilding the projection from resource_revision?
- Same job, but the projection lives in a search index that cannot be scanned in key order. What changes?
- How would you run this continuously at low cost instead of only as incident response?
Archive a resource graph without breaking live references or recursing
Resources reference other resources within a tenant; for the largest tenant the reference table holds up to 2,000,000 nodes and 8,000,000 edges. Archiving a resource must archive everything reachable from it that nothing outside the set still references, refuse when a live external referrer exists, and terminate when references form cycles, which they legitimately do. Produce the archive order and the refusal list, targeting O(V+E). Say what stops the traversal crossing a tenant boundary, and why recursion is the wrong control structure at this size.
Approach
- Load the subgraph with the tenant predicate on both endpoints of the edge, not only on the side you started from. Scoping the left table alone is the classic cross-tenant leak: one mis-entered edge then pulls another tenant's resources into the traversal and, worse, into the archive.
- Traverse iteratively with an explicit stack. A 2,000,000-node graph can hold a chain deep enough to exhaust a native stack in the low tens of thousands of frames, and that failure is a process crash rather than an error you can return.
- Treat cycles as data rather than corruption: compute strongly connected components with Tarjan in O(V+E) using its own explicit stack, then condense. The condensation is a DAG, so a topological order over it gives the archive order, and every member of a component archives in one transaction because no order within a cycle is valid.
- Decide refusals with reverse edges. A candidate is archivable only if every in-edge originates inside the candidate set, so build the transpose or count in-degrees restricted to the visited set, and emit each blocked resource with the id of the external referrer, which is the only part of the answer an operator can act on.
- Store the graph as CSR rather than a map of lists: an offsets array of V+1 8-byte entries plus E 8-byte targets is about 80 MB at this size, where boxed adjacency lists cost several times that and lose cache locality on every hop.
- Run Kahn over the condensation for the order in O(V+E). If the emitted count is short of the component count the condensation step itself is wrong, since a condensation cannot contain a cycle, which makes the check free.
Follow-up
- The graph is read in one query and the archive writes a minute later. What can change in between, and how do you make the write safe?
- The candidate set is 400,000 resources. Is that one transaction, and if not, what does a half-finished archive look like to a reader?
- An edge points at a resource in another tenant. Is that a refusal, an error, or an alert?
Keep soft-deleted accounts from blocking re-registration
app_user holds user_id, tenant_id, email CITEXT, password_hash (NULL for SSO principals), email_verified_at, auth_version, status ('invited','active','suspended','deactivated'), created_at, updated_at, deleted_at. Two live accounts for one address inside a tenant must be impossible, but an address freed by a soft delete must be reusable, and the same tenant may delete and re-register it repeatedly. Write the uniqueness DDL for PostgreSQL 16, then the equivalent for MySQL 8 where partial indexes do not exist, and say what each permits once three deleted rows already hold that address.
Approach
- Start from what is actually unique: not (tenant_id, email), but (tenant_id, email) among live rows. PostgreSQL says that directly — CREATE UNIQUE INDEX app_user_live_email ON app_user (tenant_id, email) WHERE deleted_at IS NULL. A full constraint over the same two columns burns the address permanently the first time someone deletes an account.
- Keep case-insensitivity in the type or the index, never in the application: CITEXT as given, or UNIQUE (tenant_id, lower(email)) as an expression index where the extension is unavailable. A case-sensitive unique column is exactly how two accounts for one human appear.
- For MySQL 8 the predicate has to move inside the key: add a discriminator column that is a constant 0 while the row is live and is set to user_id on delete, with UNIQUE (tenant_id, email, deleted_marker). Live rows share the constant and still collide; deleted rows differ from each other and stop colliding.
- State the NULL variant and its dependency: leaving the marker NULL for deleted rows also works, because a unique index treats NULLs as distinct — true in MySQL, and true in PostgreSQL only under the default NULLS DISTINCT, which PostgreSQL 15 lets you reverse. Check the polarity against the three existing deleted rows: constant-on-live is what preserves the collision you want, and reversing it silently admits duplicate live accounts.
- Say what a soft delete must do besides setting deleted_at: increment auth_version so existing tokens stop validating, leave resource.owner_user_id and resource_revision.actor_user_id intact, and accept that the address is retained — erasure is a different requirement answered by scrubbing the column, not by a DELETE that would break those references.
Follow-up
- A deleted account re-registers with the same address the next day. Do the old resource rows follow the new user_id, and how does the API keep the two principals apart?
- How do you honour an erasure request while resource_revision.actor_user_id still references this table?
- What changes if a user may hold membership in two tenants?
Explain why the owner filter ignores the listing index
The only index on resource is (tenant_id, status, updated_at DESC, resource_id DESC). A new endpoint returns one user's resources across all statuses, newest created first: WHERE tenant_id = $1 AND owner_user_id = $2 ORDER BY created_at DESC LIMIT 20. On a tenant with 2M rows it takes 900 ms and EXPLAIN shows a sort above a large scan. Explain precisely why the existing index cannot serve it, give the index that can, and state which of these the new index still will not help: owner_user_id alone across tenants; the same query ordered by updated_at. PostgreSQL 16.
Approach
- Separate the two jobs an index does. For filtering, a composite btree is seekable only on a left prefix, so with no predicate on status the scan can at best range over tenant_id and test owner_user_id per row; PostgreSQL 16 has no btree skip scan to jump the unconstrained column.
- For ordering, the index is sorted by (status, updated_at) within a tenant and not by created_at, so the LIMIT cannot stop early: every matching row is read and then sorted. That is the 'Sort Method: top-N heapsort' line, and it is why the plan reads 2M rows to answer with 20.
- Derive the replacement from the access path — equality, equality, then the ordering column: CREATE INDEX CONCURRENTLY ON resource (tenant_id, owner_user_id, created_at DESC). The scan seeks to the (tenant, owner) range and walks 20 entries in order, so the Sort node disappears along with the row-read.
- Treat INCLUDE (title, status) as conditional, not free. An index-only scan still visits the heap for any row whose page is not marked all-visible, so on a table taking 1.2k writes/second the win depends on autovacuum keeping the visibility map current, and the wider index costs more on every insert.
- Answer the two negatives explicitly. owner_user_id alone is not a left prefix of the new index, so it degrades to a full scan of the index at best. Ordered by updated_at, the query still seeks on the (tenant, owner) pair but must sort, because only created_at is ordered within that pair.
- Measure both sides with EXPLAIN (ANALYZE, BUFFERS) and compare estimated against actual rows at the lowest node — a 2M-versus-200 misestimate there is usually what chose the plan, and adding an index will not fix a statistics problem.
Worked solution 25 min
- Load 2M resource rows across 5k owners in one tenant, run the query under EXPLAIN (ANALYZE, BUFFERS), and record the node reading the most rows plus the Sort Method line.
- Create (tenant_id, owner_user_id, created_at DESC) concurrently and re-run, confirming the Sort node is gone and actual rows fall to about 20.
- Run the two negative cases and capture the plan for each.
- Re-run the original tenant listing query to confirm the new index has not displaced the index that query depends on.
Follow-up
- 90% of rows are status='active'. Would a partial index WHERE status = 'active' change your answer, and for which of the three queries?
- A dashboard runs this for 40 owners in one page load. What changes about the design?
- How do you roll this index out on a table taking 1.2k writes/second, and what does it cost on every insert from then on?
How do you apply Design Patterns to solve common architectural challen…
How do you apply Design Patterns to solve common architectural challenges?
Approach
- Clarify what is being asked and what a complete answer contains.
- Work from the requirement backwards to the design.
- State your assumptions explicitly before working the problem.
Follow-up
- How would you know your answer was wrong?
- What assumption would you test first?
Can you explain OOPS and its major pillars?
Can you explain OOPS and its major pillars?
Approach
- Clarify what is being asked and what a complete answer contains.
- State your assumptions explicitly before working the problem.
- Work from the requirement backwards to the design.
Follow-up
- What assumption would you test first?
- How would you know your answer was wrong?
What is the difference between GET and POST methods?
What is the difference between GET and POST methods?
Approach
- Work from the requirement backwards to the design.
- Clarify what is being asked and what a complete answer contains.
- State your assumptions explicitly before working the problem.
Follow-up
- How would you know your answer was wrong?
- What assumption would you test first?
Give the resource write endpoints a failure taxonomy clients can act on
Two callers use POST and PATCH /v1/resources: a server-side SDK that retries automatically, and a browser app that shows the user a message. Today every failure is a 500 carrying prose. Define the error contract for a malformed body, a field that fails validation, an expired token, a token whose auth_version no longer matches, a resource_id owned by another tenant, a version mismatch on update, an idempotency key reused with a different body, an exceeded tenant quota, and a read replica that has not caught up. Deliverable: the envelope, the status per case, and what each caller does.
Approach
- Split the envelope by audience: a stable
codeenum for programs, amessagedocumented as human-only and free to change wording, arequest_idthat joins to resource_revision.request_id and the trace, and adetailsarray of field paths for validation failures. Publish the negative rules too - clients never branch onmessage, and an unrecognisedcodefalls back to the status class. - Assign status by who has to change something. 400 for bytes that do not parse, 422 for a body that parses and violates a rule, 401 for a token that no longer authenticates - expiry and an auth_version mismatch are the same instruction, re-authenticate - 403 for a scope the principal lacks, 404 rather than 403 for another tenant's resource_id because 403 confirms the id exists, 412 for a failed If-Match (409 if the version travels in the body instead), 422 for a key reused with a different fingerprint, 429 for quota.
- Derive retryability from whether the outcome is unknown, not from the status number. A timeout or a 5xx on a write is unknown - the transaction may have committed and the response lost - so the only safe retry is one carrying the same idempotency key. Every 4xx except 429 is deterministic, and retrying it only spends the caller's remaining deadline.
- Refuse to model replica lag as an error. Read-after-write is held by pinning the session to the primary for a short window, not by a 404 the SDK retries into a loop; if staleness must be visible, expose it as a watermark on a 200, because a failure code invites a retry that cannot fix it.
- Write both caller behaviours into the published contract: the SDK retries only 429, 503 and timeouts, with capped backoff and full jitter bounded by the deadline it was given; the browser stops and shows
message, except on 412, where it must re-read the resource and rebase the edit rather than resubmit.
Worked solution 20 min
- Write the envelope as four named fields and state which are present on every error response without exception.
- Fill a nine-row table: condition, status, code string, retryable yes/no, and the schedule or the reason a retry cannot help.
- For each retryable row, name what makes the retry safe - HTTP method semantics, or an idempotency key.
- Write the two caller policies as pseudocode: which codes the SDK retries, and what the browser does on 412 and on 429.
Follow-up
- A customer reports two resources created from one click. Which of your status codes could have produced that, and what in the contract permitted the client's reading?
- You need a tenth error code next quarter without a version bump. What must v1 already have said for that to be non-breaking?
Listing latency scales with page size, not with filters
The tenant listing endpoint reads resource filtered by tenant_id and status, ordered by updated_at DESC, and returns each row plus the owner's display name from app_user and the actor of that resource's latest resource_revision. p99 is 55 ms at 10 rows per page and 1.4 s at 200. Database telemetry shows 401 statements per request, each under 1 ms, and nothing in the slow-query log. Diagnose the cause and give the fix, stating the statement count per request and the p99 you expect afterwards.
Approach
- Read the counters before forming a theory. 401 statements for 200 rows is one driver query plus two per row, and sub-millisecond execution with an empty slow-query log rules out a bad plan. The time is round trips, which is why it is invisible in every per-query metric and scales with rows returned rather than with filter selectivity.
- Name the two per-row statements from their normalised text: a single-row app_user lookup by user_id, and a resource_revision lookup by resource_id ordered by version DESC LIMIT 1. Confirm by dropping those two response fields and watching the statement count fall to one. That locates the calls in the serialisation layer, not the repository.
- Check that the arithmetic accounts for the whole gap. Measure one round trip to the replica in isolation; 400 trips at roughly 3 ms of network plus 0.2 ms of execution is about 1.3 s on top of a 55 ms baseline, which matches. If the multiplication had fallen short, the N+1 would only be part of the story and you would keep looking.
- Batch both lookups. Collect owner_user_ids and resource_ids from the driver query, then issue WHERE tenant_id = $1 AND user_id = ANY($2) for the users, and PostgreSQL's SELECT DISTINCT ON (resource_id) ... WHERE resource_id = ANY($2) ORDER BY resource_id, version DESC for the latest revision, which the UNIQUE (resource_id, version) index serves directly. On an engine without DISTINCT ON, use a lateral join or a row_number window. Three statements per request at any page size.
- Keep the tenant predicate in the batched query. The per-row version was implicitly scoped because its ids came from tenant-scoped rows; a batched user_id = ANY(...) with no tenant_id is an unscoped read that behaves correctly only as long as the id list is trustworthy.
- Re-measure at 10, 50 and 200 rows and confirm the statement count is constant. Latency should now track bytes returned.
Follow-up
- The page size is capped at 200 today. What breaks first if it is raised to 2,000, and is it still this bug?
- How do you stop the next N+1 from reaching production, given that no individual query is slow and the endpoint's tests pass?
- The latest-revision actor is only used to render an avatar. Make the case for denormalising it onto resource, and name the write anomaly that introduces.
Roughly ninety minutes on weeknights with one longer weekend block. The plan cuts scope rather than compressing everything, on the assumption that one thing finished per night beats four half-started.
Prepare, practise & reflect
One practical outcome each day. Spend longer where you need it.
0 / 7 done01Fix the scope and take a cold baseline
- Read the role description and write the three things the loop will almost certainly test, then write an explicit not-doing list and keep it visible all week.
- Take one twenty-five-minute coding problem and one fifteen-minute design prompt cold, and write the single sentence naming what blocked each, because those two sentences decide where the remaining evenings go.
- Set the week's rule: one thing finished every night, including the night you only have forty minutes.
Deliverable: A one-page scope with a not-doing list and two cold attempts, each carrying one sentence on what blocked it.
Practice prompt ↗Practice prompt ↗Worked solution ↗02One pattern, written three times from blank
- Choose the single pattern most likely to appear in your loop and write it three times from an empty file rather than editing the previous attempt.
- On the third pass, write the invariant as a comment before the loop body and the complexity before the first line of code.
- Stop at ninety minutes even if the third version is imperfect, and write the one thing you would fix given another hour.
Deliverable: Three independent implementations of the same pattern plus a note on what changed between them.
Practice prompt ↗Practice prompt ↗03One design, only to the depth you can defend
- Take one system shape and go only as far as requirements, interface and data model, refusing to draw a box you could not survive a follow-up about.
- Attach one number to each non-functional requirement, deriving it rather than asserting it, and write the assumption the number rests on.
- Write the one tradeoff you are choosing against and the observation that would make you reverse it.
Deliverable: One design at interface-and-schema depth with derived numbers and one written reversible tradeoff.
Practice prompt ↗Practice prompt ↗04Only the fundamentals you will have to defend
- Write, in under two hundred words each, the answers to the two questions that follow almost any implementation: why this structure and not the obvious alternative, and what happens to this code at a hundred times the input.
- Write what an index actually costs: faster lookups on the indexed columns against a write that now maintains a second structure, plus the cases where the planner declines to use it anyway, low selectivity, or a predicate wrapping the column in a function.
- Delete any answer you cannot deliver aloud in under a minute, since an answer that needs reading is not an answer you have.
Deliverable: Three written answers, each under two hundred words and each timed aloud.
Practice prompt ↗Practice prompt ↗Worked solution ↗05Your own work, timed
- Write a ninety-second and a four-minute version of your main project and time both aloud rather than reading them.
- Prepare the two follow-ups that always come: what you would do differently, and how you knew it worked.
- Put one number in the first sentence and be ready to say exactly where it came from and what it excludes.
Deliverable: Two timed narratives with one defensible number in the opening line.
Practice prompt ↗Practice prompt ↗06The one full rehearsal, in the weekend block
- Run a sixty-minute mock covering a coding round and a design round in one sitting with no break, because sustained attention is the thing evenings have not trained.
- Immediately afterwards, and before hearing any feedback, write the three moments you lost the thread.
- Spend the rest of the block only on those three moments, and on nothing you merely feel shaky about.
Deliverable: Mock notes naming three failure moments with a specific fix written under each.
Practice prompt ↗Practice prompt ↗07Taper
- Write the twenty-minute warm-up you will actually do on the morning: one problem you can already solve from a blank file, one design you can narrate, and nothing you have never seen.
- Re-read only your own notes from this week and open no new material.
- Write the logistics down: the editor or shared document you will be working in, whether execution and lookups are permitted, and the sentence you will use when you do not know something.
Deliverable: A one-page card holding the design structure, the project numbers, and the logistics.
Practice prompt ↗Worked solution ↗Expand any day for tasks and deliverables. Your progress is saved on this device.
A migration is a cost you chose to pay, not an achievement. The story is what the old system made expensive, what you measured before committing, what kept serving traffic during the cutover, and what you would have done if the numbers had come back flat. Without those, a rewrite reads as taste.
Can you discuss your experience with Entity Framework?
Can you discuss your experience with Entity Framework?
Approach
- Name the disagreement and how you resolved it with evidence.
- Give the blast radius: what could have broken, and what you measured.
- State the situation in two sentences and spend the rest on the reasoning.
Follow-up
- How did you know your change caused the improvement?
- What did you decide not to do, and why?
Reverse your own decision and price the reversal
Describe a technical decision you made and later reversed. Pick one that cost something: a service you split and merged back, a cache you added and removed, an index you created that pushed the planner onto a worse plan, a projection you rebuilt from scratch. State what you believed when you decided, the measurement that changed your mind, how long the wrong version ran in production, and what the reversal cost in migrations, dual writes, and a deprecation window for callers you did not own.
Approach
- State the original rationale without irony, in the version you would still defend given what was known then. If it is not defensible, the story is about carelessness rather than judgement, and a different example serves you better.
- Give the measurement that moved with a before and after: the p99 that did not improve, the cache hit rate that sat at 40%, the plan that flipped to a sequential scan once the table passed a size you can name.
- Cost the reversal in steps, not adjectives: expand-and-contract deploys, the dual-write window, the callers who had to be notified, the rows already written in the wrong shape that had to be backfilled or abandoned.
- Distinguish reversal from rewrite by naming what you kept. Most good reversals preserve the schema or the interface and undo one decision inside it, which is also why they were affordable.
- Finish on the process change: the smallest experiment that would have produced the same measurement in a day, and why you did not run it the first time.
Follow-up
- What in that decision was irreversible, and did you know it was irreversible when you made it?
- How did you tell the people who had already built on top of the original decision?
- What do you now measure before committing to a change of this size?
Narrate an outage you owned from page to postmortem
Pick an incident you personally drove, ideally one where writes were affected rather than reads. In six to eight minutes: state the symptom as it first appeared on a dashboard, the blast radius you established before you knew the cause, the mitigation you applied and when, the mechanism you eventually proved, and the follow-up that would prevent a repeat. Bring numbers: error rate, tenants affected, minutes to mitigate, minutes to resolve. If you cannot name what you measured, choose a different incident.
Approach
- Open on the signal rather than the cause: which metric at which percentile moved, on which service, at what time, so the listener follows the same evidence you had rather than a conclusion you already reached.
- Separate mitigation from diagnosis out loud. State what you did to stop the bleeding (flag off, shed traffic, drain a lease, roll back a deploy) and say plainly that you did it before the mechanism was known, because those are two jobs with different deadlines.
- Establish blast radius in countable terms: how many tenants, how many writes, and crucially whether the effect was loss or only delay. An append-only revision table or a pending outbox row means the change survived and the projection was merely behind, which is a repair rather than a data-loss incident.
- Prove the mechanism instead of asserting it. Name the trace span that grew, the plan that flipped to a sequential scan, the lease that expired, plus one alternative you ruled out and the signal that stayed flat while you ruled it out.
- Close on the durable fix and its cost, distinguishing what landed that week from what needed an expand-and-contract migration across several deploys, and say which of the two you actually finished.
Follow-up
- What would you do differently in the first five minutes, given the same dashboard and no more information?
- Which follow-up action did you deliberately not take, and why was dropping it the right call?
- How did you convince yourself the mitigation was safe to apply while the cause was still unknown?
- 01
Can you discuss your experience with Entity Framework?
- 02
Describe a technical decision you made and later reversed. Pick one that cost something: a service you split and merged back, a cache you added and removed, an index you created that pushed the planner onto a worse plan, a projection you rebuilt from scratch. State what you believed when you decided, the measurement that changed your mind, how long the wrong version ran in production, and what the reversal cost in migrations, dual writes, and a deprecation window for callers you did not own.
- 03
Pick an incident you personally drove, ideally one where writes were affected rather than reads. In six to eight minutes: state the symptom as it first appeared on a dashboard, the blast radius you established before you knew the cause, the mitigation you applied and when, the mechanism you eventually proved, and the follow-up that would prevent a repeat. Bring numbers: error rate, tenants affected, minutes to mitigate, minutes to resolve. If you cannot name what you measured, choose a different incident.
Is this an official Devtech interview guide?
No. It is PracHub's own research and practice material for the Software Engineer role at Devtech. Rounds and questions reflect what candidates have reported, not a process Devtech has published, and they change over time. Confirm the current format and scope with your recruiter.
PracHub interview research ↗How long does the interview process typically take?
The timeline can vary. You will typically move through the stages within a few weeks, depending on interview availability.
PracHub interview research ↗Is the technical interview focused on whiteboard coding?
Candidates describe Devtech's interviews as more conversational and focused on your deep understanding of the stack and your past experience, rather than high-pressure whiteboard algorithm challenges.
PracHub interview research ↗What is the best way to stand out?
Successful candidates are those who can clearly articulate the "why" behind their technical decisions and show a genuine interest in the specific problems Devtech is solving.
PracHub interview research ↗Are there opportunities for remote work?
The team culture is described as collaborative, and Devtech offers flexible arrangements that prioritize both team cohesion and individual productivity.
PracHub interview research ↗Sources & methodology 3 sources ↗
No official company page is cited. Rounds and questions come from candidate reports and PracHub editorial material; each source shows the date it was read.
- 01PracHub interview research ↗
PracHub editorial research into this company and role, maintained with this guide. Candidate-reported, not an employer publication.
PracHub page · Accessed 2026-09-22 - 02PracHub Software Engineer practice ↗
Cross-company practice questions for this role.
PracHub page · Accessed 2026-09-22 - 03PracHub interview preparation framework ↗
The framework the preparation plan follows.
PracHub page · Accessed 2026-09-22
Explore related engineering environments and compare the preparation focus.
SIG (Susquehanna) Software Engineer Interview Questions & Guide 2026
Database practice for SIG (Susquehanna) candidates: how an index changes a query plan, and which anomalies survive a given isolation level, since read committed still permits non-repeatable reads.
AbsenceSoft Software Engineer Interview Questions & Guide 2026
What AbsenceSoft asks Software Engineer candidates, from reported rounds and questions.
Ziphq Software Engineer Interview Guide
Data structures and algorithms practice for Ziphq candidates, where stating a bound means stating its precondition: constant-time hash lookup is an average case over keys that spread.
Airwallex Software Engineer Interview Guide
Failure-handling practice for Airwallex software engineer candidates: requests whose outcome a timeout leaves unknown, where a retry is safe, and deduplicating at the receiver instead of assuming exactly-once delivery.