This guide covers what a Data Scientist at Discover is expected to do and how to prepare for the interview.
Recruiter Screening Call
reportedA screening call is a matching exercise run by someone who will not evaluate your statistics. They are checking that the work described on your resume is work you personally did, and that its scope matches the level the role is written for. Logistics get settled in the same half hour so nobody spends an interviewer's afternoon on a mismatch. The answer that fails is the one narrated in the plural. If every sentence is 'we built' and 'the team decided', there is nothing specific to write down about you. Name the piece that was yours, the decision you made inside it, and what changed after.
What to demonstrate
- Whether the ownership implied by your resume survives one round of follow-up about who actually did which part
- Whether your described scope (data size, stakeholders, what shipped) matches the seniority the role is written at
- Whether timeline, location and compensation expectations make the rest of the loop worth scheduling
How to prepare
- Rewrite your top three resume bullets in the first person singular, each with the decision you made and what moved afterwards, then say them out loud once so the 'we' does not return under pressure
- Attach one number to each project: the baseline, the change, and the window it was measured over. Where impact was never measured, say that plainly rather than inventing a figure
- Settle your compensation range before the call and give it as a range with a reason behind it, such as current total comp or a competing timeline, instead of deflecting the question twice
Technical Round
reportedThis round decides whether someone can hand you a schema and a question and trust the number that comes back. Correctness under a clock is the bar, not clever syntax. The habit that separates strong from weak answers is checking the grain: after every join, know how many rows you expect and whether the count moved. Most wrong answers in this format are not wrong logic, they are a fan-out from a key that turned out not to be unique, or a filter applied before an aggregate when it belonged after. Say what you expect before you run it.
What to demonstrate
- Whether your row counts survive each join, and whether you notice on your own when they do not
- Deliberate handling of rows that fail to match, including whether the question needs an inner join or a left join with the non-matches kept and counted
- Whether NULLs are treated on purpose, given that a NULL compares equal to nothing and that COUNT of a column skips it
- Reaching a defensible answer inside the window instead of a refined one after it
How to prepare
- Take a two-table schema, write a join that fans out on purpose, then fix it by collapsing the many-side to one row per key before joining. Repeat until the fix is reflex rather than recall.
- Write a funnel as one query and print the distinct user count at each stage, then confirm each stage is a subset of the one above it rather than assuming it
- Do a few timed runs in a plain text box with no autocomplete and no formatter, since assessment editors often have neither
Online Assessment
reportedMuch of what gets scored here happens out loud while you type. Nobody can see your reasoning inside a half-written query, so five silent minutes read as being stuck even when they are not. State the plan in plain language first: which tables, what grain you are aggregating to, and the one filter that defines the population. Then write it. The narration doubles as insurance, because a wrong plan gets caught early and cheaply while a wrong query gets caught at the end with no time left to redo it. A timed statistics section, where one exists, is a separate test with its own clock.
What to demonstrate
- Whether the query you write matches the plan you just described
- What you do with a hint, meaning whether the correction gets absorbed or the first approach gets defended
- Whether you can debug your own wrong output by reading the result set and naming which part of the query produced the anomaly
How to prepare
- Solve three problems while screen-sharing into a recording, then watch it back and mark every stretch longer than thirty seconds where you said nothing
- Practise compressing the plan into one sentence before typing, then check afterwards whether the finished query actually matched it
- Time yourself on statistics questions that carry a business reading, such as what a confidence interval does and does not claim, rather than re-reading notes without a clock
Panel Discussions
reportedWhere a loop ends with a senior leader, that conversation is rarely another skills test. The technical signal already exists by then, so the questions tend to open up: what you would look at first, where a metric you have heard about could mislead, what you would push back on. The decision being made is scope, which in practice means level and how much you would be trusted to own unsupervised. Treating it as a formality is the usual mistake. An open question late in the day is still being scored, and a vague answer reads as someone who has not run anything themselves.
What to demonstrate
- Whether your view of the business has anything specific behind it, given that you are working only from what is public and are expected to say so
- Whether the scope of work you describe owning matches the scope of the role, instead of sitting a level below it
- Whether you can disagree with something concrete and stay useful about it, rather than agreeing with everything said in the room
- Whether your questions are ones only this person could answer, as opposed to ones the recruiter already covered
How to prepare
- Build one view you could defend for two minutes using only public information: what the funnel probably looks like, which metric likely drives decisions, and where that metric could mislead. Being wrong for a stated reason survives this round; having no view does not
- Write down the largest piece of work you have owned from question to decision, who else touched it, and what you decided alone, then check that it reads at the level you are interviewing for
- Prepare one thing you would want changed if you joined and phrase it as a question rather than a verdict, so it opens a conversation instead of closing one
Behavioral Inquiries
reportedThis round decides whether you owned a decision or watched one happen nearby. Interviewers for data roles listen for the point where the analysis stopped being a report and started changing what someone did, so build each story around that hinge: what was going to happen by default, what you found, and what happened instead. The most common weakness is a story that ends at delivery. If you can name the decision your work changed and the number that moved because of it, most follow-ups become easy.
What to demonstrate
- Whether the decision was yours to influence, or whether you are narrating a team outcome in the first person
- The counterfactual: what would have been done without your analysis, and why that default was worse
- How far your involvement ran past the handoff, and whether you checked that the change did what you predicted
How to prepare
- Pick three projects and write one sentence for each naming the decision-maker, the choice in front of them, and what they chose after seeing your work. If you cannot name a person and a choice, the story is not ready for this round.
- Reconstruct the baseline for your strongest project from the original query or dashboard rather than memory, so the before-number survives a follow-up asking where it came from.
- Prepare an honest version of a project where your recommendation was overruled, including what you did with the analysis afterwards.
PracHub editorial advice for the preparation topics above.
Counting authorizations instead of weighting them, and summing amounts across currencies
Declines skew toward high-value, cross-border and card-not-present transactions, so an unweighted approval rate can sit flat while approved value falls. Merchant retry logic also turns one declined purchase into several rows, inflating the denominator by an amount that varies by merchant and by decline reason. Amounts are held in the minor unit of the transaction currency and that unit is not always two decimals, since some currencies have none and some have three, so summing amount_minor across currencies produces a figure with no interpretation at all.
Using written premium as the denominator of a loss ratio
Premium is written at inception and earned pro rata across the exposure period, so in a growing book written premium runs ahead of earned premium and the loss ratio comes out too low, with the error reversing when the book shrinks. The numerator has the mirror-image problem if it omits incurred-but-not-reported reserves, since recent accident periods then look profitable twice over. Both sides must refer to the same exposure period, which is what an accident-period view at a fixed development age enforces.
Writing SQL without stating NULL and tie-breaking behaviour
Before calling a query finished, say what it does with NULLs, ties and empty groups. NOT IN against a subquery containing a single NULL returns no rows at all, and RANK, DENSE_RANK and ROW_NUMBER differ precisely on ties, so name which one the question requires.
Accepting a metric definition without asking about the denominator
Pin down the denominator, the eligibility filter and the time window before computing anything: conversion rate per session, per user, per eligible user and per new user are four different numbers with different behaviour. Restate the definition in one sentence and get agreement before you analyse.
Choose a category, try a prompt, then open its approach, worked solution or follow-up when you need it.
These questions examine your foundational grasp of probability, statis…
These questions examine your foundational grasp of probability, statistical inference, and hypothesis testing.
Approach
- Translate the result into the decision it informs, in one plain sentence.
- Write down the assumption the method needs before you use the method.
- Say what the estimate is of, and over what population it generalises.
Follow-up
- What sample size would you need to detect an effect half this size?
- How would you explain this result to someone who does not know statistics?
How do you detect and mitigate multicollinearity in a multivariate reg…
How do you detect and mitigate multicollinearity in a multivariate regression model?
Approach
- Set a baseline first, so any model has something honest to beat.
- Say how the offline result would be validated online before it is trusted.
- Frame the prediction: the label, the moment of prediction, and the action it triggers.
Follow-up
- How would you choose the decision threshold, and who owns that choice?
- What would you monitor after launch to know the model is still valid?
Bootstrap a fraud loss rate that clusters within merchant
You have a per-transaction frame with auth_id, merchant_id, settled_amount_reporting and net_loss_reporting, both already in one reporting currency. Most rows carry zero loss, a few carry large ones, and losses cluster within merchant. Using only numpy's random generator and no resampling helper from any library, write a bootstrap that returns a 95 percent interval for net fraud loss in basis points of settled volume, resampling merchants with replacement and taking all rows belonging to each drawn merchant. Also produce the naive row-level interval and state which you would report.
Approach
- State the estimator before writing it: total net loss divided by total settled volume, times 10,000. It is a ratio of sums, so each replicate recomputes both sums. Averaging per-transaction loss rates instead would weight a five-unit transaction like a five-thousand-unit one.
- Pre-aggregate loss and volume to merchant level once. For a ratio of sums, drawing merchants and taking all their rows is arithmetically identical to drawing merchant-level (loss_sum, volume_sum) pairs, so a replicate becomes one integer draw plus two vectorised sums rather than a groupby inside the loop.
- Draw B replicates of M merchant indices with replacement, where M is the observed merchant count, compute the ratio per replicate, and take the 2.5th and 97.5th percentiles. Say explicitly that this is a percentile interval and that BCa would correct the skew-induced bias if the decision is close.
- Repeat with independent row draws for the naive interval and compare widths on the same replicate count.
- Report the clustered interval. Rows within a merchant share an acceptance profile, a category code and a fraud exposure, so they are not independent, and the row-level interval understates variance by roughly the design effect.
Worked solution 30 min
- Compute the point estimate directly on the full data and keep it for comparison.
- Aggregate to merchant-level loss and volume arrays, record M, and set B to 2,000 with a seeded numpy Generator.
- In a vectorised loop, draw integer indices of shape (B, M), index both arrays, sum along axis 1, and take the ratio times 10,000.
- Repeat for the row-level version using the per-transaction arrays and N draws.
- Take the 2.5 and 97.5 percentiles of each replicate array and report both intervals alongside the point estimate.
Follow-up
- Your clustered interval is three times wider. How do you explain that to someone who wanted a tighter number?
- One merchant accounts for 40 percent of losses. What does that do to the interval, and what would you do about it?
- How does this change if the question is whether two months differ rather than what this month's rate is?
Given a table of customer logs, write a query to calculate a 7-day rol…
Given a table of customer logs, write a query to calculate a 7-day rolling average of purchases.
Approach
- Handle the rows that do not match: a LEFT JOIN with a NULL check is usually the question.
- State the window function and its partition and ordering out loud before writing it.
- Check whether any join is one-to-many before aggregating, or the sums inflate.
Follow-up
- What breaks if events arrive late or out of order?
- How does the query change if the join becomes one-to-many?
Explain the difference between `UNION` and `UNION ALL` and when you wo…
Explain the difference between UNION and UNION ALL and when you would choose one over the other in a production query.
Approach
- Check whether any join is one-to-many before aggregating, or the sums inflate.
- State the window function and its partition and ordering out loud before writing it.
- Handle the rows that do not match: a LEFT JOIN with a NULL check is usually the question.
Follow-up
- How does the query change if the join becomes one-to-many?
- How would you verify this result without re-running the same query?
Collapse merchant retry chains before measuring authorization approval
Merchant retry logic turns one declined purchase into several rows in fct_payment_authorization. Collapse attempts into chains: inside a partition of (card_token_id, merchant_id, amount_minor), consecutive rows whose requested_at gap is 15 minutes or less belong to the same chain. Return one row per chain with chain_started_at, attempt_count, amount_minor, channel, and chain_outcome set to 'approved' when any attempt in the chain was approved. Then report a 7-day rolling dollar-weighted approval rate by channel over chains rather than attempts. Exclude is_reversal rows.
Approach
- In a CTE, take LAG(requested_at) OVER (PARTITION BY card_token_id, merchant_id, amount_minor ORDER BY requested_at) and set is_new_chain when the previous value is null or the gap exceeds 15 minutes.
- Turn the flag into a chain identifier with SUM(is_new_chain::int) OVER (same partition, same order, rows unbounded preceding to current row), which is the standard gaps-and-islands construction.
- Aggregate to one row per chain: MIN(requested_at), COUNT(*), and BOOL_OR(auth_result = 'approved') as the chain outcome, because the purchase succeeded if any attempt in the chain did.
- Roll the chains to a daily grain per channel, then apply the rolling window as PARTITION BY channel ORDER BY chain_date RANGE BETWEEN INTERVAL '6 days' PRECEDING AND CURRENT ROW. An interval-offset RANGE frame is value-based: it admits every row in the partition whose chain_date falls in the closed window [D - 6 days, D], so a channel with no chains on some dates still gets the right seven-day sums — sparsity is exactly what this construct tolerates. ROWS BETWEEN 6 PRECEDING AND CURRENT ROW is the one that needs a dense grain, because it counts rows and on a sparse grain reaches back further than seven days.
- Left-join a dense date spine only if the output needs a row on days with no chains. That is a presentation requirement, not a correctness one, and it leaves every rolling sum unchanged. The RANGE frame's preconditions are that chain_date is a date or timestamp (an interval offset needs an ordering column it can be added to) and that the aggregation left one row per (channel, chain_date).
- Divide approved chain value by total chain value inside the rolling frame, never the average of daily rates, since averaging rates weights a quiet day the same as a heavy one.
Worked solution 40 min
- CTE 1: filter out is_reversal rows, then compute prev_requested_at with LAG and the is_new_chain flag.
- CTE 2: build chain_id with a running SUM of the flag over the same partition and order.
- CTE 3: group by partition keys plus chain_id to emit chain_started_at, attempt_count, amount_minor, channel and chain_outcome.
- CTE 4: aggregate chains to (chain_date, channel) with approved value and total value. Add the date spine here only if the report must show empty days.
- Final SELECT: two rolling SUMs over PARTITION BY channel ORDER BY chain_date RANGE BETWEEN INTERVAL '6 days' PRECEDING AND CURRENT ROW, divided at the end.
Follow-up
- This definition chains off the previous attempt, so a chain can span an hour if attempts arrive every 14 minutes. When is that right, and when would you anchor the window to the first attempt instead?
- Two genuine purchases of the same amount at the same merchant, four minutes apart, collapse into one chain. How large is that error and how would you bound it?
- A channel goes dark for three days mid-window. Which of the two frame types would silently widen, and what would the resulting rate look like?
- What changes if the merchant retries with a slightly different amount to dodge a velocity rule?
What steps do you take when test results show a statistically signific…
What steps do you take when test results show a statistically significant lift in one secondary metric but a drop in the primary metric?
Approach
- Name one primary metric, then the guardrail that stops it being gamed.
- Fix the population and the time window before naming any metric.
- Decompose the metric into the rates that drive it, and say which one you would check first.
Follow-up
- How would you detect that the metric is being gamed rather than genuinely improving?
- What would you do if the primary metric and the guardrail moved in opposite directions?
Imagine Discover experiences a sudden 15% drop in monthly digital acco…
Imagine Discover experiences a sudden 15% drop in monthly digital account activations. How would you systematically diagnose this metric drop?
Approach
- Restate the decision this analysis has to support, and who acts on the answer.
- State what result would change your recommendation, so the answer is falsifiable.
- Decompose the metric into the rates that drive it, and say which one you would check first.
Follow-up
- How would you detect that the metric is being gamed rather than genuinely improving?
- What would you do if the primary metric and the guardrail moved in opposite directions?
How would you decide whether to prioritize click-through rate or conve…
How would you decide whether to prioritize click-through rate or conversion rate for a targeted email campaign?
Approach
- Fix the population and the time window before naming any metric.
- Decompose the metric into the rates that drive it, and say which one you would check first.
- Name one primary metric, then the guardrail that stops it being gamed.
Follow-up
- What would you do if the primary metric and the guardrail moved in opposite directions?
- Which segment would you cut first, and what would that rule out?
These questions test your ability to define success metrics and diagno…
These questions test your ability to define success metrics and diagnose unexpected performance shifts in complex financial ecosystems.
Approach
- Fix the population and the time window before naming any metric.
- Restate the decision this analysis has to support, and who acts on the answer.
- Decompose the metric into the rates that drive it, and say which one you would check first.
Follow-up
- Which segment would you cut first, and what would that rule out?
- What would you do if the primary metric and the guardrail moved in opposite directions?
How do you determine the required sample size and duration for an expe…
How do you determine the required sample size and duration for an experiment before launching it?
Approach
- Decide the analysis before seeing data, including how long it runs and when you look.
- Name the randomisation unit first; it decides the variance and what the test can detect.
- Name the guardrails that would stop a launch even on a positive primary result.
Follow-up
- What would you conclude if the result is positive but the test is underpowered?
- How would you handle interference between treated and control units?
How would you design an A/B test for a new credit card reward feature …
How would you design an A/B test for a new credit card reward feature on the Discover mobile app?
Approach
- Name the guardrails that would stop a launch even on a positive primary result.
- Decide the analysis before seeing data, including how long it runs and when you look.
- Say whether units interfere with each other, and switch design if they do.
Follow-up
- What would you do if you could not randomise at all?
- How would you handle interference between treated and control units?
Size a two-week test on the ecommerce authorization path
Your team wants to test a new decline-retry policy on the ecommerce channel. The metric is the dollar-weighted authorization approval rate from fct_payment_authorization: approved amount_minor over attempted amount_minor, after collapsing retry chains within a 15-minute window on (card_token_id, merchant_id, amount_minor) and excluding is_reversal rows and zero-amount verifications, all converted to one reporting currency. Baseline is 87 percent on roughly 900,000 collapsed attempts in two weeks. Randomisation is by customer_id, mean six attempts per customer. Give the minimum detectable effect at 80 percent power, two-sided alpha 0.05, and say what you would change if it is too large.
Approach
- Compute the count-weighted binomial anchor first, because it is the number everyone expects and you need it to show why it is wrong. With n = 450,000 attempts per arm and p = 0.87, MDE = (1.96 + 0.8416) * sqrt(2p(1-p)/n).
- State that the real metric is a ratio of two sums with a random denominator, not a Bernoulli mean, so the binomial standard error is not the right one. Linearise: Var(R) is approximately Var(Y_i - R * D_i) / (n * Dbar^2), where Y_i and D_i are the approved and attempted amount totals for customer i, n is the number of customers, and Dbar is the mean attempted amount per customer.
- Apply the clustering correction, since assignment is by customer and attempts within a customer are correlated. Ask for or estimate the intra-customer correlation; the design effect is 1 + (m - 1) * rho with m = 6, so rho = 0.05 gives 1.25 and inflates the MDE by sqrt(1.25) = 1.118.
- Do not assume the amount-weighted variance; estimate it by bootstrapping customers from the last eight weeks of history and resampling whole customers, which captures both the skew in amount_minor and the within-customer correlation in one step.
- If the MDE exceeds the plausible effect, list the levers in order of cost: extend duration (MDE falls as 1/sqrt(n)), restrict to the segment where the rule can bind at all rather than diluting across all traffic, apply CUPED on the customer's pre-period approved amount, or switch the primary to the count-weighted rate and demote the dollar-weighted rate to a secondary read.
Worked solution 20 min
- Split 900,000 collapsed attempts into 450,000 per arm and compute the binomial anchor: sqrt(2 * 0.87 * 0.13 / 450000) = sqrt(5.027e-7) = 7.090e-4; multiply by 2.8016 to get 1.99e-3.
- Derive the customer count: 900,000 / 6 = 150,000 customers, 75,000 per arm, and note that this is the true sample size for inference.
- Apply the design effect at rho = 0.05: 1 + 5 * 0.05 = 1.25, so the count-weighted MDE becomes 1.99e-3 * 1.118 = 2.22e-3.
- State that the dollar-weighted MDE requires the linearised variance and cannot be derived from p alone; specify the customer-level bootstrap that would produce it and note it will be larger because amount_minor is right-skewed.
Follow-up
- The rule only changes behaviour on declined attempts, which are 13 percent of traffic. How does restricting the analysis population to attempts that could have triggered the rule change both the MDE and the estimand?
- How would your sizing change if the split were 90/10 instead of 50/50, and why is the loss more than proportional?
- Currency: the metric sums amounts converted to one reporting currency. Would you use settlement_fx_rate or a rate table pinned at test start, and what does the choice do to variance?
Portfolio delinquency improving while the loan book doubles
The blended 90-plus days-past-due rate across fct_loan_performance_monthly fell from 3.1 to 2.2 percent over two quarters while monthly funded volume roughly doubled. Credit leadership wants to know whether underwriting improved. Columns: loan_id, as_of_month_end, origination_month, months_on_book, original_principal_minor, principal_balance_minor, days_past_due, delinquency_bucket, restructured_flag, charge_off_flag, charge_off_date. Produce the view that answers the question honestly, and state in one sentence what the blended rate can and cannot tell you.
Approach
- Name the mechanical floor first. A first instalment falls due roughly a month after funding, so a loan cannot reach dpd_90_plus until around its fourth month on book. Every recent origination therefore enters the denominator with a numerator that is structurally zero.
- Build a vintage table: rows origination_month, columns months_on_book, cell equal to the share of that cohort whose worst days_past_due reached 90 or more, or whose charge_off_flag became true, at or before that age.
- Use each loan's worst state to date rather than its current bucket, and take the pre-restructure worst state, because restructuring resets days_past_due and would otherwise read as a cure.
- Compare cohorts only at equal months_on_book, and render cells beyond a cohort's current maturity as absent rather than zero, so the table cannot be misread left to right.
- Decompose the blended move into an age-mix component and a within-age component, so the write-up states how much of the 0.9 point improvement is arithmetic rather than asserting it.
Follow-up
- What does the diagonal of a vintage table represent, and when is reading it the right thing to do?
- How would a change in charge-off timing policy show up in this table, and how would you separate it from credit quality?
- Which single chart goes in front of the credit committee, and what do you say when someone asks for the blended series anyway?
For someone who has spent the last year in notebooks, dashboards or modelling work and has not written raw SQL under time pressure. The first four days rebuild query fluency against a fixture you control and can verify by hand; the last three attach that fluency to the rest of the loop.
Prepare, practise & reflect
One practical outcome each day. Spend longer where you need it.
0 / 7 done01Build a fixture you can check answers against
- Create a local Postgres or SQLite database with four tables (users, sessions, events, orders) holding roughly 200 rows you generated yourself, so you know the contents well enough to predict every result.
- Deliberately seed the cases that break queries: a user with no sessions, a session with no events, two orders sharing a timestamp, a NULL in one join key, and one duplicated user row.
- Before writing any SQL, hand-compute five answers on paper (how many users placed at least one order, median orders per ordering user, and three others) and save them as the ground truth for the week.
Deliverable: A one-command seed script plus a text file of five hand-computed answers to grade every later query against.
Practice prompt ↗Practice prompt ↗Practice prompt ↗Worked solution ↗02Joins, filters and NULL semantics
- Answer "which users have no orders" three ways (LEFT JOIN with IS NULL, NOT EXISTS, NOT IN) and confirm that the NOT IN version returns zero rows once the subquery contains a NULL, because the comparison is never TRUE.
- Reproduce the LEFT JOIN that silently collapses to an inner join by putting a right-table predicate in WHERE, then fix it by moving the predicate into the ON clause, and record both row counts.
- Create a fan-out bug on purpose by joining orders to order_items and summing the order total, then correct it with a pre-aggregated subquery and explain in one line which table changed the grain.
Deliverable: One annotated .sql file holding the three join traps, each with the wrong result and the corrected result side by side.
Practice prompt ↗Practice prompt ↗Practice prompt ↗03Window functions and frames
- Write three window queries against the fixture: a running order total per user, the rank of each order within its user by value, and the day gap to that user's previous order, then check each against the day-one ground truth.
- Run ROW_NUMBER, RANK and DENSE_RANK over a column containing ties, print all three side by side, and write one sentence on when each is the correct choice.
- Switch one query from the default frame (RANGE BETWEEN UNBOUNDED PRECEDING AND CURRENT ROW, which is what you get when ORDER BY is present and no frame is written) to ROWS BETWEEN UNBOUNDED PRECEDING AND CURRENT ROW, and explain why the output differs only when the ORDER BY column has duplicates.
Deliverable: Three verified window queries plus a short note explaining the RANGE versus ROWS difference in your own words.
Practice prompt ↗Practice prompt ↗Practice prompt ↗04The four analytical query patterns
- Write a monthly retention grid: first order month per user, then months-since-first as the column, and verify that month zero equals the cohort size exactly.
- Sessionize the events table under a 30-minute inactivity rule using LAG plus a cumulative sum over a new-session flag.
- Build a four-step funnel that counts distinct users rather than events at each step, and state the rule you applied to a user who reaches step three without ever logging step two.
Deliverable: One file with the retention, sessionization and funnel patterns, each carrying a one-line note on the assumption it bakes in.
Practice prompt ↗Practice prompt ↗Worked solution ↗05Write SQL the way you will have to write it live
- Set a 12-minute timer and solve three medium prompts in a plain editor with no execution and no autocomplete, then run them and tally syntax errors separately from logic errors.
- Narrate one solution aloud while writing it, stating the grain of each intermediate result (one row per user, one row per user-day) before you type its body.
- Rewrite your slowest solution as a CTE chain where every CTE name states its grain, and time yourself re-solving it from blank.
Deliverable: A recording of one narrated solution plus an error tally that separates syntax from logic.
Practice prompt ↗Practice prompt ↗06One day for everything that is not SQL
- Write the preconditions of the two-sample t-test from memory, then check them: independent observations, and a difference in means whose sampling distribution is approximately normal, which at large sample sizes follows from the central limit theorem rather than from normality of the raw values.
- Write the difference between an odds ratio from logistic regression and a relative risk, and state the condition under which the two are close (low outcome prevalence).
- Prepare a 90-second answer to "how would you know this model is any good" that names the metric, the baseline you would beat, and the cost of the errors you care about.
Deliverable: One page of notes covering test preconditions, the odds-ratio caveat and the model-quality answer.
Practice prompt ↗Practice prompt ↗07Full loop rehearsal
- Run a 45-minute mock with someone willing to interrupt: 20 minutes of SQL, 15 minutes defining a metric, 10 minutes on a past project.
- Re-solve from blank the two queries you were slowest on this week and compare the times against day five.
- Write a five-line answer to "walk me through a project" that puts a number in the first sentence and names the decision the work changed.
Deliverable: Mock feedback notes plus a timed project narrative you can deliver without reading it.
Practice prompt ↗Practice prompt ↗Worked solution ↗Expand any day for tasks and deliverables. Your progress is saved on this device.
Interviewers here are not checking whether you can describe a project. They want the decision you made, why you made it under the information you had, and what changed afterwards that someone else could measure. A story that ends at 'I built a model' has no ending. Say what the model caused, or what you stopped doing because of it.
Can you explain the concept of statistical significance and how you co…
Can you explain the concept of statistical significance and how you communicate a p-value to non-technical stakeholders?
Approach
- Close with what you would do differently, concretely.
- Name the disagreement or constraint, and how you resolved it with evidence.
- Quantify the outcome, including what you would not claim credit for.
Follow-up
- What would you do differently if you ran that project again?
- How did you know the outcome was caused by your change?
Retract a published number after finding a currency bug
Two weeks ago you published an interchange and fraud analysis that summed amount_minor across fct_payment_authorization without converting currencies. Minor units are not two decimals everywhere: some currencies carry none and some carry three, so the sum has no interpretation. A pricing decision is already in flight on the back of it. You now have corrected figures. Produce the retraction: what you send, to whom, in what order, and what you change in the process so this class of error is caught next time rather than trusted next time.
Approach
- Size the error before announcing it, because saying the number is wrong without a magnitude and a direction forces every reader to assume the worst case.
- Check whether the conclusion actually flips: if the ranking that drove the pricing decision is unchanged, that belongs in the first sentence beside the correction rather than buried at the end.
- Tell the person acting on it first and directly, then the wider distribution, using the same text, so nobody learns about it secondhand.
- Write the correction as four parts: the old number, the cause in one clause, the effect on the pending decision, and the new number. Leave out self-flagellation, which makes the reader do emotional work instead of acting.
- Fix the class rather than the instance: a rule that a sum over amount_minor either groups by transaction_currency or passes through both conversion steps, exponent scaling and then a dated rate into one named reporting currency, plus a standing reconciliation of the settled subset to the settlement ledger inside each settlement_currency.
Follow-up
- The corrected figures do not change the decision. Do you still send the correction, and what does that choice signal?
- What automated check would have caught this, where would it live, and what would it cost in false alarms?
Explain an incomplete dispute chart to a non-technical executive
A finance lead is looking at first-chargeback rate by transaction month, built from fct_card_dispute joined to fct_payment_authorization on auth_id and attributed to requested_at. The last three months slope sharply down and the lead wants to announce a fraud improvement at tomorrow's review. Consumer dispute rights commonly run around 120 days from the transaction or expected delivery date, so those months are not complete. In five minutes, with no statistics vocabulary, explain why the decline is not yet evidence and say exactly what you would put on the slide instead.
Approach
- Lead with the mechanism in the listener's own terms, not with the statistical name for it: a dispute is attributed to the month the transaction happened, but it can be filed up to roughly 120 days later, so recent months contain only the disputes filed so far.
- Show completeness rather than arguing about the rate: for each transaction month, plot the share of its eventual disputes already filed, estimated from months that are fully matured. The last three months will sit visibly below 100 percent.
- Replace the chart with two artefacts: a matured series that stops 120 days back and is labelled final, and a development-factor estimate for the immature months drawn as a dashed range and labelled an estimate.
- Hand over one sentence the executive can repeat without you in the room: the recent months look better because the disputes have not arrived yet, not because fewer will arrive.
- Offer a weekly signal they can watch instead, such as the risk-score mix of approved volume or the decline-rule hit rate, and state up front what it does and does not predict.
Follow-up
- The deck ships tomorrow regardless. What exactly goes on the slide, and what wording do you insist on?
- How would you estimate the development factors, and how would you notice if they had shifted?
- 01
Can you explain the concept of statistical significance and how you communicate a p-value to non-technical stakeholders?
- 02
Two weeks ago you published an interchange and fraud analysis that summed amount_minor across fct_payment_authorization without converting currencies. Minor units are not two decimals everywhere: some currencies carry none and some carry three, so the sum has no interpretation. A pricing decision is already in flight on the back of it. You now have corrected figures. Produce the retraction: what you send, to whom, in what order, and what you change in the process so this class of error is caught next time rather than trusted next time.
- 03
A finance lead is looking at first-chargeback rate by transaction month, built from fct_card_dispute joined to fct_payment_authorization on auth_id and attributed to requested_at. The last three months slope sharply down and the lead wants to announce a fraud improvement at tomorrow's review. Consumer dispute rights commonly run around 120 days from the transaction or expected delivery date, so those months are not complete. In five minutes, with no statistics vocabulary, explain why the decline is not yet evidence and say exactly what you would put on the slide instead.
Is this an official Discover interview guide?
No. It is PracHub's own research and practice material for the Data Scientist role at Discover. Rounds and questions reflect what candidates have reported, not a process Discover has published, and they change over time. Confirm the current format and scope with your recruiter.
PracHub interview research ↗How difficult are the technical interviews at Discover?
The technical rounds are of moderate difficulty, focusing heavily on core fundamentals rather than obscure algorithmic puzzles. If you are comfortable with intermediate SQL queries, data manipulation in Python, and basic statistical concepts, you will be well-prepared.
PracHub interview research ↗How long does the entire interview process typically take?
The timeline varies, but candidates generally experience a process spanning roughly three to four weeks from the initial recruiter screen to final panel interviews. However, some loops may experience scheduling delays depending on team availability.
PracHub interview research ↗Are the interviews remote or on-site?
Most initial screening rounds and technical interviews are conducted via video conferencing platforms. Depending on the team location and role level, final round panels may be conducted virtually or on-site at corporate offices.
PracHub interview research ↗What is the best way to stand out during the behavioral round?
Focus on impact and collaboration. Use the structured approach to highlight not just what technical solutions you built, but how you influenced stakeholders, handled disagreements, and drove measurable business value.
PracHub interview research ↗Sources & methodology 3 sources ↗
No official company page is cited. Rounds and questions come from candidate reports and PracHub editorial material; each source shows the date it was read.
- 01PracHub interview research ↗
PracHub editorial research into this company and role, maintained with this guide. Candidate-reported, not an employer publication.
PracHub page · Accessed 2026-09-22 - 02PracHub Data Scientist practice ↗
Cross-company practice questions for this role.
PracHub page · Accessed 2026-09-22 - 03PracHub interview preparation framework ↗
The framework the preparation plan follows.
PracHub page · Accessed 2026-09-22
Explore related engineering environments and compare the preparation focus.
1st Central Data Scientist Interview Questions & Guide 2026
Causal-inference exercises for 1st Central data scientist prep: difference-in-differences, matching, instrumental variables, and knowing when observational data simply cannot answer the question asked.
3M Data Scientist Interview Questions & Guide 2026
Communication practice for 3M data scientist candidates: turn an analysis into a recommendation, name the uncertainty honestly, and answer the follow-up a skeptical stakeholder will raise.
ValueLabs Data Scientist Interview Questions & Guide 2026
Causal-inference exercises for ValueLabs data scientist prep: difference-in-differences, matching, instrumental variables, and knowing when observational data simply cannot answer the question asked.
vConstruct Data Scientist Interview Questions & Guide 2026
Communication practice for vConstruct data scientist candidates: turn an analysis into a recommendation, name the uncertainty honestly, and answer the follow-up a skeptical stakeholder will raise.