As a Machine Learning Engineer at Graphcore, you are at the cutting edge of hardware-software co-design. You will work on the Intelligence Processing Unit (IPU) architecture, pushing the boundaries of how machine learning models are trained and deployed at scale. Your work is not just about writing code; it is about optimizing the interaction between high-performance hardware and complex neural network architectures.
This role is critical to the Graphcore mission of accelerating machine intelligence. You will contribute to the development of software stacks, compilers, or performance libraries that allow researchers and developers to extract maximum efficiency from Graphcore hardware. Expect to tackle challenges related to parallelism, memory management, and latency, often working in environments where standard frameworks hit their limits.
Technical Screening
reportedWhat this round decides is narrow: whether you can produce code that runs and is correct on inputs nobody showed you. An elegant solution that does not compile scores below a plain one that does, so write a correct brute force first, say out loud that you know its cost, and improve it with the working version still on screen. What separates strong answers is who finds the broken case. Trace your own code against an empty input, a single element, and duplicate keys before you say you are finished, because being told is far more expensive than noticing.
What to demonstrate
- Whether degenerate inputs get checked without being asked for: an empty collection, one element, every element equal, and the extreme value the input type allows
- Whether the complexity you state matches the code you actually wrote, including a sort or a copy sitting inside a loop
- Whether the finished answer is verified against the worked examples before you call it done, rather than assumed correct because the code reads correctly
How to prepare
- Take five problems you have already solved and, without running anything, write down what each returns for empty input, a single element, and all-duplicates. Then run them and count how many you predicted wrong.
- Drill the brute force as its own skill: on ten problems, write only the obviously-correct slow version and time how long it takes to get it passing. If that is more than a few minutes, that is what to practise, not the optimal version.
- Add a fixed last step before you submit anything, reading only the loop bounds and the initial value of each accumulator, which is where most off-by-one errors live
Deep-Dive Interviews
reportedAn unlabelled round is first an information problem, and the cheapest information is free. Whoever schedules it can usually tell you how long it runs, who will be in the room and what they work on, whether you will be writing code and in what environment, and whether anything is being sent beforehand. Ask in writing so the answer is on record, then prepare for the two or three formats those answers still leave open instead of betting on one. What separates a strong candidate is not guessing right; it is having an opening that works whichever one it turns out to be.
What to demonstrate
- Whether you can start work from an ambiguous brief, since tolerating a vague scope without stalling is the same thing the job asks for
- Whether the questions you asked beforehand were ones that change your preparation, such as duration, medium and who is joining, rather than ones whose answers you could not have acted on
- Whether you adapt when the round turns out to be something other than what you were told, instead of spending the first ten minutes visibly recalibrating
How to prepare
- Send one short scheduling message asking four things: how long, who is joining and what they work on, whether you will be writing code and where, and whether to prepare anything in advance. Treat a vague reply as real information, since it means the round is loosely structured and you will be shaping it yourself.
- Write one opening that works in any of the formats still open: restate in your own words what you have been asked to do, then ask which of two directions is more useful to them. Say it aloud until it stops sounding recited.
- Set up for the two most likely formats before the call starts, with a blank editor in the language you would choose and a shared document you can type into, so a format surprise costs you nothing in the first minutes
PracHub editorial advice for the preparation topics above.
Assuming an isolation level prevents the anomaly you actually have
Isolation levels are named by the SQL standard but implemented differently, so any claim about one is only true of a named engine. PostgreSQL defaults to READ COMMITTED, where every statement takes a fresh snapshot, so two statements inside one transaction can legitimately disagree about the same row. Its REPEATABLE READ is snapshot isolation: it removes non-repeatable and phantom reads but permits write skew, where two transactions each read a set, each conclude their own write is safe, both commit, and the combined result violates a constraint that no single row expresses. Only SERIALIZABLE closes that, and it closes it by aborting a transaction with a serialization failure (SQLSTATE 40001), which means the guarantee is theoretical unless the application has a retry loop. InnoDB's REPEATABLE READ is a different mechanism again - plain SELECTs read a consistent snapshot while locking reads and writes see the latest committed row - so a read-modify-write inside one transaction can act on a value that the transaction's own earlier SELECT never returned.
Choosing an index from the columns a query mentions rather than from how it filters and orders
A composite B-tree index on (a, b, c) can be seeked only as a left prefix: equality on a, then equality on b, then a range or an ordering on c. A query that filters on b alone cannot seek into it at all and at best gets a full scan of the index; a query that filters a and ranges on b gets no benefit from c, because the index is only sorted by c within a fixed (a, b) pair. The practical consequence is that one index per column is close to useless for multi-predicate queries while a single correctly ordered composite index turns a scan into a lookup. The ordering half is what gets missed: if the index cannot satisfy the ORDER BY, the database must read every matching row and sort before the limit can apply, so a LIMIT 20 over a million matching rows still reads a million rows.
Saying 'eventually consistent' without naming the anomaly a user would see
Describe the concrete symptom you are choosing to accept: the author reloads and their own comment is missing for two seconds, or two devices show different balances for a minute. The class of consistency model is a technical label; the tolerable anomaly is the actual product decision.
Finishing a solution without stating its complexity
Give time and space in the same breath as the code, and define n explicitly when there are two sizes, since n nodes and m edges are not interchangeable. Space is the half that gets skipped: count the auxiliary structures you allocate and the recursion stack at its deepest, not only the answer you hand back.
Choose a category, try a prompt, then open its approach, worked solution or follow-up when you need it.
Describe the trade-offs between FP32, FP16, and INT8 precision in mode…
Describe the trade-offs between FP32, FP16, and INT8 precision in model training.
Approach
- Pick the metric from the cost of each error type, not from habit.
- Say how you would validate it, and where leakage could enter the split.
- Name the simplest model that could work and what would make you move past it.
Follow-up
- What changes if the classes are heavily imbalanced?
- How would you know the model is overfitting?
Explain the difference between data parallelism and model parallelism …
Explain the difference between data parallelism and model parallelism in distributed training.
Approach
- State the learning problem: the label, the unit of prediction and how the model is used.
- Say how you would validate it, and where leakage could enter the split.
- Name the simplest model that could work and what would make you move past it.
Follow-up
- How would you know the model is overfitting?
- Where could label leakage enter this setup?
How would you debug a model that is not converging during training on …
How would you debug a model that is not converging during training on a multi-node cluster?
Approach
- Say how you would validate it, and where leakage could enter the split.
- Name the simplest model that could work and what would make you move past it.
- Pick the metric from the cost of each error type, not from habit.
Follow-up
- What changes if the classes are heavily imbalanced?
- How would you know the model is overfitting?
How do you approach profiling a machine learning workload to identify …
How do you approach profiling a machine learning workload to identify performance bottlenecks?
Approach
- Pick the metric from the cost of each error type, not from habit.
- Name the simplest model that could work and what would make you move past it.
- State the learning problem: the label, the unit of prediction and how the model is used.
Follow-up
- How would you know the model is overfitting?
- Where could label leakage enter this setup?
Track a rolling failure rate per destination for circuit decisions
The egress service delivers about 1,500 webhooks per second across roughly 40,000 destinations, each call bounded by a 10 second timeout. Maintain, per destination, the failure rate over the trailing 60 seconds so a caller can ask before dispatch whether the circuit should open. Attempts arrive as (destination_id, finished_at_ms, outcome). Requirement: amortised O(1) per attempt, with total memory bounded by the destination count rather than by traffic. Give the structure, its exact memory, and the rule that stops a destination with three attempts from opening a circuit.
Approach
- Name the exact-deque version and then reject it as the default. Holding timestamps and advancing a tail pointer past anything older than now minus 60 seconds is a correct two-pointer window at amortised O(1) per attempt, but its memory tracks in-window traffic, so one destination in a retry storm holds hundreds of thousands of entries while thousands of quiet destinations hold none.
- Use a ring of 60 one-second buckets per destination, each bucket a pair of counters for attempts and failures. On an attempt, advance the ring by the elapsed whole seconds, zeroing at most min(elapsed, 60) buckets, then increment the head. That is amortised O(1) with a fixed footprint per destination.
- State the footprint: 60 buckets times two 4-byte counters is 480 bytes of payload per destination, so 40,000 destinations is roughly 20 to 25 MB with per-entry overhead, bounded by the catalogue rather than by the rate. The cost is granularity, since the oldest bucket ages out in whole seconds, which is far tighter than the decision needs.
- Require a minimum sample before the circuit may open. A destination with three attempts and three failures reads as 100 percent and is not evidence; a floor of roughly 20 attempts in the window makes the ratio meaningful, and below that floor use a run of consecutive failures as the trigger instead.
- Expire idle destinations, or memory grows with every destination ever seen rather than with the live set. Hold the rings in a bounded LRU keyed on destination_id and treat a miss as no history, which is the correct default for an endpoint that has been silent for a minute.
- Keep the half-open probe out of the window arithmetic. After the circuit opens, one probe per interval decides whether to close it, and folding that single success into a window that still holds a 100 percent failure history would reopen the destination on one data point.
Worked solution 20 min
- Define the bucket struct and the advance step: take floor(finished_at_ms / 1000), compare with the ring's current second, zero min(delta, 60) buckets forward, then write into the new head.
- Trace a destination that receives 5 attempts, goes silent for 90 seconds, then receives one more, and confirm the rate is computed from one attempt rather than six.
- Compute total memory for 40,000 destinations at 60 buckets of two 4-byte counters, and state what changes if the window widens to 300 seconds.
- Write the open rule as a single predicate combining the minimum-attempt floor with the rate threshold.
Follow-up
- The fleet is 30 instances and each sees roughly a thirtieth of a destination's traffic. Where does the rate actually live, and what does a per-instance answer get wrong?
- A destination answers in 9.5 seconds and succeeds. It is not failing but it is consuming your per-destination concurrency. What signal should open the circuit here?
- How would you make the window survive a process restart, and is it worth the cost?
Explain how you would implement an efficient data pipeline for high-ba…
Explain how you would implement an efficient data pipeline for high-bandwidth accelerators.
Approach
- Say which index the query would use, and what makes it unusable.
- Handle the rows that do not match: that is usually the actual question.
- Check whether any join is one-to-many before aggregating, or the sums inflate.
Follow-up
- How would you run this migration without downtime?
- How does the query change if that join becomes one-to-many?
Hold a per-tenant active cap against concurrent creates
A tenant on the standard plan may hold at most 50 resources with status='active'. The create handler runs SELECT count(*) FROM resource WHERE tenant_id = $1 AND status = 'active', compares to 50, then inserts. Two creates arrive 3 ms apart on different instances and the tenant lands at 51. Name the anomaly, say whether PostgreSQL 16 READ COMMITTED or REPEATABLE READ prevents it and why, then give an implementation that holds the cap at READ COMMITTED with the exact statements. Finally, say what changes when the cap is 'at most one running export per tenant' on job_run.
Approach
- Name it: write skew. The two transactions read an overlapping set and write disjoint rows, so there is no row-level conflict for the engine to detect and each commit is individually legal.
- Rule out the levels precisely. READ COMMITTED takes a fresh snapshot per statement and takes no lock on the counted rows, so both see 49. PostgreSQL's REPEATABLE READ is snapshot isolation: it removes non-repeatable reads and phantoms within the snapshot but still admits write skew, because the anomaly is not a re-read of a changed row, it is a read of a set that a concurrent transaction invalidates. Only SERIALIZABLE closes it, by tracking the read dependency and aborting one transaction with SQLSTATE 40001 — a guarantee that exists only if the application re-runs the whole transaction from the read.
- Convert the set predicate into a single-row conflict: keep tenant.active_resource_count and run UPDATE tenant SET active_resource_count = active_resource_count + 1 WHERE tenant_id = $1 AND active_resource_count < 50 in the same transaction as the INSERT. Zero affected rows is the cap, returned as 409. The row lock serialises the decision at any isolation level, and contention is bounded to one tenant's row — which is also the fair-scheduling unit, unlike a global counter that would convoy every tenant behind one row.
- State the cost you just took on: a counter is a second source of truth that can drift, so every path that changes status must adjust it inside the same transaction, and a periodic reconciliation has to exist, with resource_revision as the authority for what the count should have been.
- For the job case the invariant is expressible per row, so let the database hold it: a partial unique index on job_run (tenant_id, job_type) WHERE status IN ('queued','running') makes a second running export unwritable and the loser takes 23505, mapped to 409. That is strictly better than a counter — no drift, no reconciliation — and it is available only because the cap is one rather than fifty.
- Add the retry discipline each route demands: under SERIALIZABLE both 40001 and deadlock 40P01 are retryable and the retry must re-execute the read, while under READ COMMITTED with the counter nothing retries, because the conflict is reported to the caller rather than raised as an error.
Worked solution 35 min
- Reproduce with two sessions that both count 49, both insert and both commit, at READ COMMITTED and then at REPEATABLE READ; record the final active count for each.
- Repeat both sessions at SERIALIZABLE and record which SQLSTATE the loser receives and at which statement it is raised.
- Implement the counter form and run a 20-way concurrent create against a tenant sitting at 45 active resources.
- Implement the partial unique index for the job case and race 20 enqueues of the same export.
Follow-up
- A resource moves from archived back to active. Which statements change, and what breaks if the counter update and the status change land in different transactions?
- The cap becomes plan-dependent and a plan can change mid-month. Where does the number 50 live, and who reads it?
- How do you detect after the fact that the counter drifted, without locking the table?
Discuss strategies for managing memory constraints when training large…
Discuss strategies for managing memory constraints when training large models.
Approach
- Name the failure you are designing for, then the recovery path.
- Fix the scope first: who calls this, how often, and what they do when it fails.
- Choose a partition key and say what query it makes expensive.
Follow-up
- How does this behave when that dependency is down for an hour?
- What would you drop to keep the system up under load?
Design a distributed training system for a large language model.
Design a distributed training system for a large language model.
Approach
- Fix the scope first: who calls this, how often, and what they do when it fails.
- Choose a partition key and say what query it makes expensive.
- State the consistency you need, and where you are willing to be stale.
Follow-up
- What would you drop to keep the system up under load?
- How does this behave when that dependency is down for an hour?
Explain the mechanics of convolution operations and how they are mappe…
Explain the mechanics of convolution operations and how they are mapped to hardware.
Approach
- State your assumptions explicitly before working the problem.
- Say what you would check first and why it is the highest-information step.
- Clarify what is being asked and what a complete answer contains.
Follow-up
- How would you know your answer was wrong?
- What assumption would you test first?
Keep one unresponsive destination from stalling all webhook delivery
Egress delivery sends about 1.5k webhooks/second to 40k destinations, with a per-destination concurrency cap of 4 and a 10-second connect-plus-read timeout. One destination begins accepting connections and never responding; within the hour 150 destinations behave the same way. Design the delivery path so unrelated destinations are unaffected: the pool structure, the timeouts, the retry policy, the per-destination circuit, and what is recorded so a retry is not a second effect at the receiver. State how many in-flight slots the degraded destinations hold and why that number decides the design.
Approach
- Start with the number, and with the law that produces it. In-flight work is arrival rate times time in service, so 1.5k/second against a healthy 200 ms response needs about 300 concurrent slots. Per destination the same product applies, ceilinged by the concurrency cap: at the fleet average of 0.0375 deliveries/second per destination (1.5k spread over 40k) a 10-second timeout is 0.375 slots. A destination that has queued retries behind it is a different regime - every slot refills the instant an attempt expires, so it sits pinned at its cap of 4 - and 150 of those hold 600 slots, more than a pool sized for healthy traffic, entirely consumed by endpoints that will never answer. The per-destination cap bounds one endpoint and says nothing about the aggregate, which is exactly why it alone is not containment.
- Contain with bulkheads and an admission bound rather than a larger pool. Cap total in-flight per pool and shard destinations across pools by a hash of destination id, so a correlated group - one provider, one region - cannot exceed its pool's share. A delivery refused admission and re-queued with backoff is strictly better than one holding a slot on behalf of a receiver that is not listening.
- Treat the timeout as two timeouts, and be exact about what shortening one buys. Connect and read are separate failures and both must be shorter than the budget of whatever is waiting. Occupancy is min(cap, arrival rate x timeout), so dropping the read ceiling from 10 seconds to 3 cuts a merely slow destination's occupancy proportionally, 0.375 slots to 0.11 at the fleet average. It does not cut the 4 slots held by one of the 150: a destination with a retry backlog arrives far above cap/timeout - 0.4/second at a 10-second timeout, 1.33/second at 3 - so it stays pinned at the cap either way and only the slot-seconds per attempt fall. What that does buy is detection rate: 3.3x more failures observed per second on the same four slots, which is how fast the circuit reaches its threshold. Pick the value from the measured latency distribution of successful deliveries, with their high percentile as the floor, not from a round number.
- Add a circuit per destination, counting a timeout as a failure. Once open, fail fast without taking a slot - that is the whole point, converting 4 held slots into zero. Half-open on a schedule with exactly one probe and close only if the probe succeeds, so a permanently dead endpoint costs one request per interval instead of a growing retry queue.
- Make retries safe and non-synchronising. Back off with full jitter, sleeping a random value in [0, min(cap, base x 2^attempt)], because a fixed delay re-synchronises every failed delivery to one destination into a simultaneous burst. Delivery is at-least-once, so the payload carries the event id under the signature and the receiver deduplicates on it; record the attempt against (destination, event id) rather than a bare success flag, so a lost response does not become a second business effect on the other side.
Worked solution 25 min
- Compute healthy in-flight from rate times latency, then slots held by 150 destinations at the cap and the full timeout, and compare both against one pool size.
- Write the pool sharding rule and the admission bound, and state what a refused delivery does next.
- Pick connect and read timeouts from the success-latency distribution, then compute min(cap, arrival rate x timeout) for an average destination and for one with a retry backlog, and say which of the two the shorter timeout actually moves.
- Write the circuit's state machine with its open threshold, probe interval and close condition, and the backoff formula with full jitter.
Follow-up
- The destination is not dead - it answers in 9.5 seconds with a 200. Does a failure-rate circuit open? Should anything shed that traffic, and on what signal?
- One destination requires deliveries in order. What does a per-destination concurrency of 4 do to that guarantee, and what would you change to offer it?
- A destination has been parked six hours with 900k undelivered events. What does resuming look like, and is delivering the whole backlog the right call?
Edge instances grow 400 MB per hour until the nightly restart
Edge API instances start at 700 MB resident and grow about 400 MB/hour; a nightly rolling restart has hidden it for weeks. Growth continues unchanged when request rate halves overnight, p99 degrades in the last hours before an instance is recycled, and heap used immediately after a forced full GC rises monotonically. The service holds no product state. Name the discriminating measurement that separates the plausible causes, give the most likely cause, and give the fix and how you would verify it.
Approach
- Separate resident memory from live heap first, because they fail differently. Resident size can grow from fragmentation, native buffers or thread stacks while the heap is flat; heap used after a full GC rising monotonically is the measurement that says objects are reachable and not being released. You already have it, so this is retention, not fragmentation, and that closes off half the candidate list.
- Use the rate's independence from traffic as the discriminator. Growth that continues at half the request rate rules out per-request objects that are merely slow to collect and points at a structure that grows with distinct values observed rather than with call volume. Write the candidates that have that property: a metrics registry keyed on a high-cardinality label, an unevicted cache, an interner, a per-key lock map.
- Take two heap snapshots an hour apart and diff by retained size, reading the dominator tree, not by allocation count or instance count. Expect one root holding a map with millions of entries, then follow the reference chain to the code that inserts and never removes. Allocation profilers point at churn, which is the wrong signal here.
- The candidate that fits this service is an observability label carrying an identifier, such as a request path recorded before templating so that /v1/resources/48213 becomes its own metric series. That grows with distinct ids seen, is independent of rate, and explains the late p99 degradation, since GC cost rises with the size of the live set.
- Fix by bounding cardinality at the source: template the path to /v1/resources/{id} before it becomes a label, move tenant id from a label to a log field or an exemplar, and cap the registry with a bounded map that evicts. Add a cardinality ceiling that fails loudly in a lower environment rather than growing quietly in production.
- Verify with a soak rather than a restart. Hold one instance out of the nightly recycle for 48 hours with the fix and compare post-GC heap and series count against an unfixed control taking the same traffic.
Follow-up
- Post-GC heap is now flat but resident size still creeps. What are you looking at, and does it matter?
- How would you have detected this before an OOM, given the nightly restart masked the trend?
- That label is what makes one dashboard useful. How do you keep the dashboard and lose the leak?
Day one measures instead of guessing, under a fixed rubric, and the remaining hours are allocated in proportion to the gaps before any studying begins. The allocation is deliberately not renegotiated midweek, because the area that feels worst on day three is usually the one that is moving.
Prepare, practise & reflect
One practical outcome each day. Spend longer where you need it.
0 / 7 done01Diagnostic, scored before you study anything
- Sit a 110-minute diagnostic in four blocks: forty-five minutes on two coding problems, twenty-five on one design prompt taken to interface and data model, twenty of short-answer fundamentals, and twenty delivering two behavioural answers aloud.
- Score each block from 0 to 3 on a fixed rubric where 3 is correct and fluent, 2 is correct but slow or prompted, 1 is partially correct and 0 is stuck, grading the artifact rather than how the attempt felt.
- Allocate days two to five in proportion to 3 minus each block's score, write the allocation down, and commit to leaving it alone.
Deliverable: A scored rubric and a fixed hour allocation for the rest of the week.
Practice prompt ↗Practice prompt ↗Practice prompt ↗Worked solution ↗02Largest gap: find the boundary rather than the subject
- Split the weakest area into named sub-skills and rate each separately. For coding those are restating the problem, choosing the structure, stating the invariant, turning the invariant into loop bounds, handling empty and single-element input, and accounting for complexity out loud.
- Attempt three items positioned just above where the rating drops off, and for each write the first move you failed to make.
- Re-attempt one of them from blank four hours later with nothing open.
Deliverable: A sub-skill map with the two blocking sub-skills circled.
Practice prompt ↗Practice prompt ↗03Drill the blocking sub-skill by repeating the shape
- Do eight short repetitions of the same shape rather than eight different problems, so what gets practised is the pattern and not the puzzle.
- State the rule you now hold in one sentence, then test it against a case built to break it, a sliding window over an array containing negative values, or a cache-aside read path whose invalidation message is dropped.
- Have someone else read your one-sentence rule and find the precondition you left out.
Deliverable: One rule statement with its preconditions attached and one counterexample that would have caught the incomplete version.
Practice prompt ↗Practice prompt ↗04Second gap, plus maintenance on the strongest area
- Run the same sub-skill decomposition on the second-largest gap in half the time.
- Spend twenty-five timed minutes on the block you scored highest, choosing the hardest item you can still finish rather than a warm-up.
- Write whether each area fails you on recall, on setup, or on execution, and set the fix accordingly: repetition for recall, a written checklist for setup, timed work for execution.
Deliverable: A second sub-skill map plus a one-line failure diagnosis for each area.
Practice prompt ↗Practice prompt ↗Worked solution ↗05The gap that is not a skill
- Record one technical and one behavioural answer, then count two things in the playback: seconds before your first clarifying question, and sentences you began without knowing where they would end.
- Practise saying that you do not know, followed by how you would find out, without letting it soften into a guess, and practise stating a complexity or an estimate before being asked for it.
- Redeliver one answer under a hard ninety-second cap, which forces structure ahead of detail.
Deliverable: Two recordings with a counted reduction in time-to-first-question.
Practice prompt ↗Practice prompt ↗06Retest under day-one conditions
- Sit the same 110-minute structure with new prompts of comparable difficulty and score it on the identical rubric.
- For any block that did not move, change the method rather than adding hours: a block stuck at 1 usually means the practice was too varied, not too short.
- Write down which single block you would still lose the offer on.
Deliverable: A second scored rubric placed beside the first, with one named remaining risk.
Practice prompt ↗Practice prompt ↗07Full loop under interview conditions
- Run a sixty-minute mock over the two blocks that moved least, with an interviewer briefed to interrupt and change direction mid-answer.
- Write the recovery script for going blank: restate the question, state your assumption, name the first thing you would check.
- Say every rule from the week aloud without reading it, and cut any you cannot state in a single sentence, since a rule you have to reconstruct mid-answer will not survive an interruption.
Deliverable: A one-page card holding the recovery script and only the rules you could state from memory.
Practice prompt ↗Practice prompt ↗Worked solution ↗Expand any day for tasks and deliverables. Your progress is saved on this device.
Counting review comments or mentees proves nothing. The useful version is a specific change you approved with a reservation you stated, or one you blocked and the delay that cost. Say which standard you were holding and why it was worth the friction. A mentoring story needs the thing the other person can now do without you.
Tell callers you do not own that their integration breaks
A field in a write endpoint's response must change shape. You own the endpoint; you do not own the four internal callers or the outbound webhook consumers who read it. Describe a deprecation you were responsible for: what you shipped first, how you established who was actually reading the field, the window you gave and what set its length, what you did about the consumer who never moved, and how you decided removal was safe. Name the signal you used, not the announcement you sent.
Approach
- Establish the reader set empirically rather than from a wiki of owners: per-field usage counters keyed by principal, or access logs attributed to a consumer. State the blind spot of whichever you pick, since a consumer that reads the field only on a monthly job will not appear in a week of logs.
- Ship additive first. Populate the new field alongside the old one so no reader is forced to move, which is also what keeps a rolling deploy safe, because old and new instances answer the same requests at the same time and a rollback must still find the old shape present.
- Set the window from the slowest legitimate consumer's release cadence, not from your calendar, and decide separately what to do for a consumer with no release process at all, such as an external webhook endpoint you can only email.
- Convert silence into evidence before you rely on it: a short, low-traffic removal window that makes a still-dependent consumer fail visibly and loudly while you are watching, rather than at three in the morning after you have moved on.
- State the removal criterion as a measurement with a duration attached, such as observed reads at zero across a full billing cycle, and keep the change reversible for one release after removal.
Follow-up
- How would you detect a consumer that reads the field only during a monthly export?
- One caller refuses to move and has a commercial relationship behind it. What changes in your plan and what does not?
- After removal, what makes the change irreversible, and how long before you cross that line?
Narrate an outage you owned from page to postmortem
Pick an incident you personally drove, ideally one where writes were affected rather than reads. In six to eight minutes: state the symptom as it first appeared on a dashboard, the blast radius you established before you knew the cause, the mitigation you applied and when, the mechanism you eventually proved, and the follow-up that would prevent a repeat. Bring numbers: error rate, tenants affected, minutes to mitigate, minutes to resolve. If you cannot name what you measured, choose a different incident.
Approach
- Open on the signal rather than the cause: which metric at which percentile moved, on which service, at what time, so the listener follows the same evidence you had rather than a conclusion you already reached.
- Separate mitigation from diagnosis out loud. State what you did to stop the bleeding (flag off, shed traffic, drain a lease, roll back a deploy) and say plainly that you did it before the mechanism was known, because those are two jobs with different deadlines.
- Establish blast radius in countable terms: how many tenants, how many writes, and crucially whether the effect was loss or only delay. An append-only revision table or a pending outbox row means the change survived and the projection was merely behind, which is a repair rather than a data-loss incident.
- Prove the mechanism instead of asserting it. Name the trace span that grew, the plan that flipped to a sequential scan, the lease that expired, plus one alternative you ruled out and the signal that stayed flat while you ruled it out.
- Close on the durable fix and its cost, distinguishing what landed that week from what needed an expand-and-contract migration across several deploys, and say which of the two you actually finished.
Follow-up
- What would you do differently in the first five minutes, given the same dashboard and no more information?
- Which follow-up action did you deliberately not take, and why was dropping it the right call?
- How did you convince yourself the mitigation was safe to apply while the cause was still unknown?
Unblock an engineer without taking the keyboard
A teammate has spent two days on a job handler that occasionally writes duplicate rows. They are certain the queue is delivering twice by mistake. You suspect a lease expiring under a slow handler, so the job is running concurrently with itself. Describe how you have unblocked someone in this position: what you asked before offering a hypothesis, what you showed them rather than told them, and what you left them owning. Then say what you would do if their theory turned out to be the right one.
Approach
- Ask before diagnosing, and ask for things answerable from data they already have: the attempt count on the job rows that produced duplicates, the handler's observed duration against its lease expiry, and whether the duplicate rows share a natural key that a unique constraint could have caught.
- Teach the shape rather than the answer. A lease cannot distinguish a dead worker from a slow one, so a handler that outruns its lease is running twice by design, and deploys deliver the other half by killing handlers mid-run on every rollout. Both of their candidate theories produce identical duplicate rows, which is why the evidence has to come from timings rather than from argument.
- Hand over a checklist they execute: a natural key on every write the handler performs so the second copy collides rather than appends, the record of intent written before any external effect, a lease heartbeat while running, and the metric that shows it working.
- Keep ownership with them deliberately. Pair on the first write, then step back; if you finish it yourself you have closed one ticket and left the same person stuck on the next redelivery.
- Close on the systemic gap that let two days pass, which is usually a missing dashboard for attempt counts or an undocumented at-least-once contract, and fix that rather than only the bug.
Follow-up
- How would you distinguish a genuine double-delivery from a lease expiry using only the data already stored?
- Their handler calls an external endpoint before recording that it did. What do you tell them to change first?
- What do you do the third time the same person brings you the same class of bug?
- 01
A field in a write endpoint's response must change shape. You own the endpoint; you do not own the four internal callers or the outbound webhook consumers who read it. Describe a deprecation you were responsible for: what you shipped first, how you established who was actually reading the field, the window you gave and what set its length, what you did about the consumer who never moved, and how you decided removal was safe. Name the signal you used, not the announcement you sent.
- 02
Pick an incident you personally drove, ideally one where writes were affected rather than reads. In six to eight minutes: state the symptom as it first appeared on a dashboard, the blast radius you established before you knew the cause, the mitigation you applied and when, the mechanism you eventually proved, and the follow-up that would prevent a repeat. Bring numbers: error rate, tenants affected, minutes to mitigate, minutes to resolve. If you cannot name what you measured, choose a different incident.
- 03
A teammate has spent two days on a job handler that occasionally writes duplicate rows. They are certain the queue is delivering twice by mistake. You suspect a lease expiring under a slow handler, so the job is running concurrently with itself. Describe how you have unblocked someone in this position: what you asked before offering a hypothesis, what you showed them rather than told them, and what you left them owning. Then say what you would do if their theory turned out to be the right one.
Is this an official Graphcore interview guide?
No. It is PracHub's own research and practice material for the Machine Learning Engineer role at Graphcore. Rounds and questions reflect what candidates have reported, not a process Graphcore has published, and they change over time. Confirm the current format and scope with your recruiter.
PracHub interview research ↗How much time should I dedicate to interview preparation?
Given the technical rigor, most successful candidates spend 3–4 weeks of focused preparation. Prioritize deep-diving into the specific hardware and distributed systems topics mentioned in this guide.
PracHub interview research ↗Is there a specific focus on coding languages?
Yes. You should be highly comfortable with Python for rapid prototyping and C++ for performance-critical implementations.
PracHub interview research ↗What is the culture like at Graphcore?
The culture is highly collaborative and focused on engineering excellence. You will work with some of the brightest minds in the industry, and you will be encouraged to challenge assumptions and push boundaries.
PracHub interview research ↗How long is the typical process?
The process generally takes 4–6 weeks from the initial screen to an offer, depending on team availability and scheduling.
PracHub interview research ↗Sources & methodology 3 sources ↗
No official company page is cited. Rounds and questions come from candidate reports and PracHub editorial material; each source shows the date it was read.
- 01PracHub interview research ↗
PracHub editorial research into this company and role, maintained with this guide. Candidate-reported, not an employer publication.
PracHub page · Accessed 2026-09-30 - 02PracHub Machine Learning Engineer practice ↗
Cross-company practice questions for this role.
PracHub page · Accessed 2026-09-30 - 03PracHub interview preparation framework ↗
The framework the preparation plan follows.
PracHub page · Accessed 2026-09-30
Explore related engineering environments and compare the preparation focus.
Roku Machine Learning Engineer Interview Questions & Guide 2026
What Roku asks Machine Learning Engineer candidates, from reported rounds and questions.
Qualcomm Machine Learning Engineer Interview Questions & Guide 2026
What Qualcomm asks Machine Learning Engineer candidates, from reported rounds and questions.
Gusto Machine Learning Engineer Interview Questions & Guide 2026
What Gusto asks Machine Learning Engineer candidates, from reported rounds and questions.
Expedia Group Machine Learning Engineer Interview Questions & Guide 2026
What Expedia Group asks Machine Learning Engineer candidates, from reported rounds and questions.