The Data Scientist role at Iris software is a high-impact position designed to bridge the gap between complex raw data and actionable business strategy. You will be responsible for building, deploying, and refining machine learning models that directly influence the company’s product roadmap and operational efficiency. By leveraging large-scale data, you will help the organization solve ambiguous problems and drive evidence-based decision-making.
This role is critical to the Iris software ecosystem, as your work directly impacts how the business understands its performance and user behavior. You will collaborate closely with cross-functional teams, including product managers and engineering, to translate technical requirements into scalable solutions. If you are someone who thrives on turning raw data into strategic assets in a fast-paced environment, this role offers the complexity and visibility required to make a significant professional mark.
HR Screening
reportedA screening call is a matching exercise run by someone who will not evaluate your statistics. They are checking that the work described on your resume is work you personally did, and that its scope matches the level the role is written for. Logistics get settled in the same half hour so nobody spends an interviewer's afternoon on a mismatch. The answer that fails is the one narrated in the plural. If every sentence is 'we built' and 'the team decided', there is nothing specific to write down about you. Name the piece that was yours, the decision you made inside it, and what changed after.
What to demonstrate
- Whether the ownership implied by your resume survives one round of follow-up about who actually did which part
- Whether your described scope (data size, stakeholders, what shipped) matches the seniority the role is written at
- Whether timeline, location and compensation expectations make the rest of the loop worth scheduling
How to prepare
- Rewrite your top three resume bullets in the first person singular, each with the decision you made and what moved afterwards, then say them out loud once so the 'we' does not return under pressure
- Attach one number to each project: the baseline, the change, and the window it was measured over. Where impact was never measured, say that plainly rather than inventing a figure
- Settle your compensation range before the call and give it as a range with a reason behind it, such as current total comp or a competing timeline, instead of deflecting the question twice
Technical Evaluations
reportedMuch of what gets scored here happens out loud while you type. Nobody can see your reasoning inside a half-written query, so five silent minutes read as being stuck even when they are not. State the plan in plain language first: which tables, what grain you are aggregating to, and the one filter that defines the population. Then write it. The narration doubles as insurance, because a wrong plan gets caught early and cheaply while a wrong query gets caught at the end with no time left to redo it. A timed statistics section, where one exists, is a separate test with its own clock.
What to demonstrate
- Whether the query you write matches the plan you just described
- What you do with a hint, meaning whether the correction gets absorbed or the first approach gets defended
- Whether you can debug your own wrong output by reading the result set and naming which part of the query produced the anomaly
How to prepare
- Solve three problems while screen-sharing into a recording, then watch it back and mark every stretch longer than thirty seconds where you said nothing
- Practise compressing the plan into one sentence before typing, then check afterwards whether the finished query actually matched it
- Time yourself on statistics questions that carry a business reading, such as what a confidence interval does and does not claim, rather than re-reading notes without a clock
Managerial Round
reportedAn added round often puts you in front of someone outside the core hiring team: a partner engineer, a product owner, a domain expert, sometimes a more senior manager. The question they are really asking is not whether you can do the work but whether they would trust a number that came from you. That changes what a good answer looks like. Lead with what the decision cost and what it changed, keep the method available but not central, and be plain about the limits of your evidence. Overstating a result is the fastest way to lose this round.
What to demonstrate
- Whether you can explain a technical choice to someone who will never read your code, without either flattening it into nothing or hiding inside jargon
- Honesty about evidence strength: what the analysis establishes, what it only suggests, and what it cannot say at all
- How you take disagreement, specifically whether you update on a good objection, hold your position with reasons, or fold on contact
How to prepare
- Write the two-sentence version of your most technical project for a non-specialist, then check that neither sentence needs a method name to make sense.
- For one result you are proud of, write the strongest objection someone could raise and a response that concedes the part of it that is correct.
- Prepare one decision that turned out to be wrong: how you found out, what it cost, and what you changed afterwards. A senior cross-functional interviewer asks for this more often than a technical one does.
PracHub editorial advice for the preparation topics above.
Reading consumption metrics before the metering lag window has closed
Usage pipelines land late and correct themselves, which is exactly what is_restated and restated_at record. A dashboard queried on day T sees a partially populated tail for the last several days, so the most recent points always slope downward and always look like a regression. Analysts then explain the artefact, and sometimes ship a change to fix it. Establish the empirical settling time by measuring how much a given usage_date's total moves between first_written_at and its final value, exclude that many trailing days from every reportable figure, and never compare a fresh period against a settled one.
Computing monthly churn against the entire customer base when contracts are annual
An annual contract has no opportunity to churn except at its renewal date, so an account that is eleven months from renewal is in the denominator while being incapable of appearing in the numerator. The resulting rate is smaller than the real one by roughly the ratio of the base to the renewal-eligible base, and it oscillates with the seasonality of when deals were originally signed rather than with anything about the customers. The corresponding trap on the other side is counting a churn on the date the record was updated rather than on term_end_date, which shifts losses into whichever month the operations team did its paperwork.
Ending an analysis without a recommendation or next step
Close with what you would do and what would change your mind, stated as a condition you can check later. If the evidence is genuinely inconclusive, recommend the specific next measurement and say what it costs in time or exposure.
Accepting a metric definition without asking about the denominator
Pin down the denominator, the eligibility filter and the time window before computing anything: conversion rate per session, per user, per eligible user and per new user are four different numbers with different behaviour. Restate the definition in one sentence and get agreement before you analyse.
Choose a category, try a prompt, then open its approach, worked solution or follow-up when you need it.
Explain the difference between supervised and unsupervised learning wi…
Explain the difference between supervised and unsupervised learning with real-world examples.
Approach
- Say how the offline result would be validated online before it is trusted.
- Set a baseline first, so any model has something honest to beat.
- Check what information would not exist at prediction time, and exclude it.
Follow-up
- What would you monitor after launch to know the model is still valid?
- Where could label leakage enter this setup?
How do you handle overfitting in a machine learning model?
How do you handle overfitting in a machine learning model?
Approach
- Check what information would not exist at prediction time, and exclude it.
- Say how the offline result would be validated online before it is trusted.
- Pick an evaluation metric that matches the cost of each error type, not a default.
Follow-up
- How would you choose the decision threshold, and who owns that choice?
- What would you monitor after launch to know the model is still valid?
How do you assess the performance of a model beyond just accuracy?
How do you assess the performance of a model beyond just accuracy?
Approach
- Set a baseline first, so any model has something honest to beat.
- Frame the prediction: the label, the moment of prediction, and the action it triggers.
- Pick an evaluation metric that matches the cost of each error type, not a default.
Follow-up
- What would you monitor after launch to know the model is still valid?
- Where could label leakage enter this setup?
Permutation-test a consumption experiment randomised at account level
An experiment randomised 900 accounts into two arms. You have one row per account: account_id, arm, consumption_28d (billable units after launch) and consumption_pre (the 28 days before). Consumption is heavy-tailed and the largest account is several percent of the total. Write a permutation test from scratch: winsorise at the pooled 99th percentile as a pre-registered rule, use the difference in arm means of the winsorised outcome as the statistic, and obtain a two-sided p-value from 20,000 relabellings of the account-level arm vector. Report the observed effect, the p-value, and the same test on a CUPED-adjusted outcome.
Approach
- Be precise about what the permutation test needs. Under the sharp null of no effect for any account, the outcomes are exchangeable across arm labels, and the test is valid for ANY statistic T(outcomes, labels) provided the identical function is applied to the observed labels and to all 20,000 relabellings. The pooled 99th percentile is a function of the outcome vector alone, so recomputing it inside the loop returns the same number 20,000 times: that is wasted CPU, not a bias, and hoisting it out is an optimisation rather than a correctness fix. Say plainly that capping at all changes the estimand from mean consumption to mean capped consumption; it is not a neutral cleaning step.
- The mistake that does invalidate the test is an asymmetry between the observed statistic and the permuted ones, and the easiest way to create it is to derive the cleaning rule from the observed arm labels and then freeze it — winsorise each arm at its own observed 99th percentile, hold those two caps fixed, and permute. The observed value is then computed with caps matched to its own partition while every relabelling is scored with caps belonging to a different one, so the null distribution no longer answers the question the p-value claims to answer. A per-arm cap recomputed consistently inside every permutation is a valid test, but it estimates a contrast whose two sides are capped at different thresholds, so prefer the pooled cap on estimand grounds and pre-register it.
- Permute the account-level arm vector, because the account is the randomisation unit. Relabelling anything finer — users, workspaces, requests — generates a null distribution narrower than the design actually supports and returns p-values that are anti-conservative.
- Vectorise the null: tile the treatment indicator into a (B, n) matrix and permute along axis 1 with rng.permuted(..., out=...). The statistic is a difference of means, so the treated sum alone determines it and the whole null is one matrix-vector product. Use the two-sided p-value (1 + count(|stat_perm| >= |stat_obs|)) / (B + 1); the plus-one on each side is not cosmetic, it keeps the p-value away from exactly zero and keeps the test valid at finite B.
- For CUPED, fit theta = cov(y, x) / var(x) on the pooled data and use that same theta for the observed statistic and every relabelling. Pooled theta, like the pooled cap, carries no label information, so where in the loop you compute it is again only a performance question; fitting theta within arms is what goes wrong, because the adjusted outcome then depends on the labels and an observed-label fit frozen across all 20,000 relabellings breaks the match between observed and permuted statistics. x must be measured entirely before launch, which consumption_pre is. Expected variance reduction is about 1 - corr(y, x)^2; measure the achieved reduction from the two null distributions rather than asserting it.
Worked solution 45 min
- cap_y = np.quantile(df.consumption_28d, 0.99); y = np.minimum(df.consumption_28d.to_numpy(float), cap_y); cap_x = np.quantile(df.consumption_pre, 0.99); x = np.minimum(df.consumption_pre.to_numpy(float), cap_x)
- t = (df.arm == 'treatment').to_numpy(); n1 = int(t.sum()); n0 = len(t) - n1; obs = y[t].mean() - y[~t].mean()
- rng = np.random.default_rng(11); L = np.tile(t.astype(np.int8), (20_000, 1)); rng.permuted(L, axis=1, out=L); s1 = L @ y; stats = s1/n1 - (y.sum() - s1)/n0
- p = (1 + int(np.sum(np.abs(stats) >= abs(obs)))) / (20_000 + 1)
- theta = np.cov(y, x, ddof=1)[0,1] / np.var(x, ddof=1); y_adj = y - theta*(x - x.mean()); repeat steps 2 to 4 on y_adj and compare stats.std(ddof=1) between the two runs.
Follow-up
- The p-value is 0.04 with the cap and 0.31 without it. What do you report, and what did you pre-register?
- Colleagues in a shared workspace can see the treated behaviour. How does that change the design and the estimate?
- How many accounts would you need to detect a 5% lift given this outcome's distribution?
Why do you want to join Iris software specifically?
Why do you want to join Iris software specifically?
Approach
- Say which table is the grain you start from, and join outward from it.
- Compute rates by summing numerator and denominator separately, never by averaging rates.
- State the window function and its partition and ordering out loud before writing it.
Follow-up
- How would you verify this result without re-running the same query?
- What breaks if events arrive late or out of order?
What criteria do you use to select a specific algorithm for a new proj…
What criteria do you use to select a specific algorithm for a new project?
Approach
- Handle the rows that do not match: a LEFT JOIN with a NULL check is usually the question.
- State the window function and its partition and ordering out loud before writing it.
- Say which table is the grain you start from, and join outward from it.
Follow-up
- How does the query change if the join becomes one-to-many?
- How would you verify this result without re-running the same query?
Net revenue retention on a cohort frozen twelve months back
fct_subscription_period carries subscription_period_id, account_id, arr_cents, plan_code, term_start_date, term_end_date, booked_at, amendment_type, superseded_by_id (the subscription_period_id of the version that replaced this one, null on the live version of a lineage) and is_current. Compute net revenue retention for month M: the summed arr_cents at M for the set of accounts holding arr_cents > 0 at M-12, divided by that same set's arr_cents at M-12. An account can hold more than one live subscription, a churned account contributes zero rather than dropping out, and nothing signed after M-12 may enter either side. Return the ratio plus the expansion, contraction and churn components in cents.
Approach
- Write one reusable as-of ARR snapshot parameterised by a date: rows whose term brackets the date AND whose booked_at is at or before the date, then only the version of each lineage that is still live at that date, then sum arr_cents per account. The booked_at guard matters because an amendment signed in advance otherwise co-exists with the term it replaces and double counts the account.
- Collapse the lineage on superseded_by_id, not on any attribute of the contract. Keep a row when superseded_by_id IS NULL, or when the successor it points at was booked after the date. Ranking with ROW_NUMBER() OVER (PARTITION BY account_id, plan_code ...) instead is wrong in both directions: an amendment that moves the account from one plan_code to another puts the old and new versions in different partitions, so both are rank 1, both bracket the date, and the account's arr_cents is counted twice; and two genuinely concurrent subscriptions that happen to share a plan_code land in one partition, so one of them is deleted.
- Resolve the successor with a LEFT JOIN back to fct_subscription_period on subscription_period_id, and treat a missing successor as not superseded. An inner join would silently delete an account's ARR on a dangling pointer, which is a data-quality bug in the source, not a retention movement.
- Never use is_current for the M-12 side. is_current describes today; using it at the historical snapshot backdates the present contract onto last year's cohort and makes retention look like 100 percent by construction.
- Freeze the cohort from the M-12 snapshot where arr_cents > 0, then LEFT JOIN the M snapshot onto it and COALESCE the missing side to zero. An inner join deletes exactly the churned accounts, which is the single largest way this number gets overstated.
- Return a ratio of sums, not a mean of per-account ratios. The two are different estimands: contraction is floored at zero while expansion is unbounded, so the mean of ratios is both biased relative to the aggregate and far noisier on a skewed revenue base.
- Decompose per account on the delta: positive delta is expansion, negative delta with a non-zero M value is contraction, a zero M value is churn. The three components must reconcile to numerator minus denominator.
- Prove no leakage: any account whose first contract began after M-12 must be absent from both sides, and the cohort row count must be identical in the numerator and denominator.
Worked solution 45 min
- Write arr_asof(d) as a CTE or lateral: from fct_subscription_period s take rows with term_start_date <= d AND term_end_date >= d AND booked_at <= d, LEFT JOIN fct_subscription_period succ ON succ.subscription_period_id = s.superseded_by_id, keep the row when s.superseded_by_id IS NULL OR succ.subscription_period_id IS NULL OR succ.booked_at > d, then sum arr_cents per account_id across every surviving version.
- Sanity-check the lineage rule on one amended account before going further: at a date after the amendment, the account must contribute exactly one version per lineage even when the amendment changed plan_code, term dates or both.
- Materialise base = arr_asof(M-12) filtered to arr_cents > 0, and curr = arr_asof(M).
- LEFT JOIN curr onto base on account_id and COALESCE(curr.arr_cents, 0) AS arr_now.
- Compute nrr = sum(arr_now)::numeric / NULLIF(sum(base.arr_cents), 0), and the three components with SUM(...) FILTER on the sign of arr_now - base.arr_cents and on arr_now = 0.
- Reconcile: assert sum(arr_now) - sum(base.arr_cents) = expansion - contraction - churn, and assert the cohort account count is identical on both sides.
Follow-up
- Net revenue retention can rise while the business shrinks. Show one mechanism and name the guardrail that catches it.
- How do you handle an account that co-terms two subscriptions into one mid-window, so the subscription count changes but the money does not?
- Finance computes this from invoiced amounts and gets a different number. Which is right for which question?
Design a seat-utilisation metric before enforcing licensed seat limits
Seat limits are currently unenforced. Leadership wants a metric to decide whether to enforce them at renewal. You have dim_user_membership (user_id, account_id, role, seat_type, is_service_account, activated_at, deactivated_at, last_seen_at) and fct_subscription_period (account_id, contracted_seats, pricing_model, term_end_date, arr_cents, is_current). Define licensed seat utilisation at the account grain, state every exclusion in both the numerator and the denominator, and say what a value above 1.0 means. Deliver the metric plus the guardrail that protects against enforcement destroying more ARR than it recovers.
Approach
- Numerator: distinct user_id in dim_user_membership with seat_type = 'licensed_paid', is_service_account = false, deactivated_at null and last_seen_at inside a trailing 28 days. Service accounts hold a membership and burn API keys but consume no human attention, so counting them inflates utilisation hardest on the most deeply integrated accounts, which is exactly backwards.
- Denominator: contracted_seats from the fct_subscription_period version current at the evaluation date. Exclude accounts with pricing_model = 'pure_consumption' entirely, because contracted_seats is null there and the ratio is undefined rather than zero. A null coerced to zero produces an infinite ratio that will lead the report.
- Interpret both tails and say what each means commercially. Above 1.0 means the entitlement is not enforced and humans are sharing seats, which is recoverable revenue. Persistently below roughly 0.5 is the most reliable available signal of a seat reduction at renewal, because buyers audit seat counts at renewal and at no other moment.
- Guardrail: ARR at risk from enforcement, the sum of arr_cents over accounts with utilisation above 1.0 whose term_end_date falls inside the enforcement window. Enforcing on an account that responds by cutting seats at renewal converts a recoverable overage into a permanent downgrade, and the recovered revenue can be smaller than the loss.
- Report the metric as a distribution with the two tails counted separately and the renewal calendar attached, because no account can act on enforcement until its own term ends. A fleet average of seat utilisation is a number nobody can act on.
Follow-up
- last_seen_at is null for service accounts by definition. If the is_service_account flag is unreliable, what happens to your numerator, and how would you audit the flag?
- Why a 28-day activity window rather than 7 or 90, and what evidence would change your answer?
Design the retention metric suite for a quarterly board pack
You own the retention numbers in the quarterly board pack. Build them from fct_subscription_period (account_id, arr_cents, term_start_date, term_end_date, amendment_type, booked_at, is_current, superseded_by_id) rather than from invoices. Deliver net revenue retention over a trailing twelve months, the guardrails that stop it being satisfied by shrinking the business, and the reporting lag you will enforce. Specify the cohort rule, state whether you report a ratio of sums or a mean of per-account ratios and why, and name two ways the headline number rises while the business gets worse.
Approach
- Freeze the cohort at month M-12: the set of accounts with ARR above zero on that date. No account acquired after M-12 enters either side of the ratio. That constraint is the entire point, because it makes the number a statement about the installed base rather than about how well sales did last quarter.
- Read arr_cents from the fct_subscription_period version that was live on each of the two dates, selected by term_start_date and term_end_date bracketing the date, never by is_current, which silently rates last year's revenue at this year's plan. Invoiced amounts move with billing_frequency and prepayment and will not reconcile to a contract-derived figure, so pick one source and say which.
- Report the ratio of sums: total arr_cents at M over the frozen cohort divided by total at M-12. The mean of per-account ratios is a different estimand and much noisier on a few thousand accounts, because contraction is bounded below at zero while expansion is unbounded, so a handful of large expansions dominate the mean.
- Attach the two guardrails that close the two gaming routes. Gross logo retention on the renewal-eligible base catches raising the ratio by declining to serve the churn-prone segment, because it is computed only over accounts that actually had an opportunity to leave. New-logo ARR reported beside it exposes a contracting top of funnel that the ratio is structurally incapable of seeing.
- Enforce the lag and the restatement policy. A 45-day grace on term_end_date for late paperwork means the most recent 45 days are never reportable, and a month is openly restated when the grace closes rather than quietly corrected between board packs.
Worked solution 40 min
- Build an as-of ARR resolver: for a date D and an account, select the fct_subscription_period row where term_start_date <= D and term_end_date >= D, breaking ties on the latest booked_at so a superseded version never wins.
- Form the cohort at M-12 as accounts with as-of ARR above zero, then compute both sums with that account set held fixed.
- Compute the same quantity as a mean of per-account ratios and record the gap between the two.
- Build gross logo retention over accounts with term_end_date in each month, with the 45-day grace applied, and pull new-logo ARR from amendment_type = 'new' by booked_at.
- Recompute net revenue retention with the five largest accounts removed and report it beside the headline.
Follow-up
- Compute net revenue retention both ways on the same cohort. What does a large gap between the ratio of sums and the mean of per-account ratios tell you about the shape of the expansion distribution?
- A ramp deal is signed in March and starts in July. Which month does it belong to on the board's sales-effectiveness page, and which on this one?
Weekly active organisations fell nine percent over one week
A dashboard reports the weekly active organisation ratio on a trailing seven-day window ending each Wednesday. This week it reads nine percent below last week. You have fct_api_request (account_id, environment, traffic_class, http_status, request_at) and dim_account (account_id, billing_country, account_status, is_internal, is_current). Nothing was released. Decide whether usage actually fell, and hand back a corrected series plus a one-paragraph explanation that a non-analyst can repeat without you in the room.
Approach
- Count the holiday-free business days inside each window before comparing them. A trailing seven-day window spans exactly five weekdays wherever it ends, so its business-day count can only fall to four or fewer when a public holiday lands inside it and can never reach six, while usage in this domain follows a hard five-to-two weekday cycle. Two windows holding different numbers of business days are not comparable whatever the product did.
- Count distinct active accounts per calendar day for the last ten weeks and overlay the two windows. A calendar problem shows as a small number of weekdays sitting at weekend level, not as every day being uniformly lower.
- Cut the daily series by billing_country and index each country-day to that country's trailing same-weekday median, which isolates a regional public holiday from a product change.
- Check the denominator on its own: the metric divides by accounts whose account_status was in trial, free or active_paid for the whole week, so a batch suspension or status backfill moves the ratio with no change in the numerator at all.
- Report the series with each window's business-day count and the holiday dates annotated beside it, and state the residual week-over-week change that survives once the calendar effect is removed. Compare against earlier windows holding the same number of business days rather than dividing by business days, since distinct-account counts are sublinear in window length and dividing would over-correct.
Follow-up
- Distinct account counts are sublinear in the number of days in the window. Why does losing one of five business days reduce the count by noticeably less than twenty percent?
- How would you make this metric comparable across countries with different holiday calendars without hand-maintaining a holiday table forever?
For someone who has spent the last year in notebooks, dashboards or modelling work and has not written raw SQL under time pressure. The first four days rebuild query fluency against a fixture you control and can verify by hand; the last three attach that fluency to the rest of the loop.
Prepare, practise & reflect
One practical outcome each day. Spend longer where you need it.
0 / 7 done01Build a fixture you can check answers against
- Create a local Postgres or SQLite database with four tables (users, sessions, events, orders) holding roughly 200 rows you generated yourself, so you know the contents well enough to predict every result.
- Deliberately seed the cases that break queries: a user with no sessions, a session with no events, two orders sharing a timestamp, a NULL in one join key, and one duplicated user row.
- Before writing any SQL, hand-compute five answers on paper (how many users placed at least one order, median orders per ordering user, and three others) and save them as the ground truth for the week.
Deliverable: A one-command seed script plus a text file of five hand-computed answers to grade every later query against.
Practice prompt ↗Practice prompt ↗Worked solution ↗02Joins, filters and NULL semantics
- Answer "which users have no orders" three ways (LEFT JOIN with IS NULL, NOT EXISTS, NOT IN) and confirm that the NOT IN version returns zero rows once the subquery contains a NULL, because the comparison is never TRUE.
- Reproduce the LEFT JOIN that silently collapses to an inner join by putting a right-table predicate in WHERE, then fix it by moving the predicate into the ON clause, and record both row counts.
- Create a fan-out bug on purpose by joining orders to order_items and summing the order total, then correct it with a pre-aggregated subquery and explain in one line which table changed the grain.
Deliverable: One annotated .sql file holding the three join traps, each with the wrong result and the corrected result side by side.
Practice prompt ↗Practice prompt ↗03Window functions and frames
- Write three window queries against the fixture: a running order total per user, the rank of each order within its user by value, and the day gap to that user's previous order, then check each against the day-one ground truth.
- Run ROW_NUMBER, RANK and DENSE_RANK over a column containing ties, print all three side by side, and write one sentence on when each is the correct choice.
- Switch one query from the default frame (RANGE BETWEEN UNBOUNDED PRECEDING AND CURRENT ROW, which is what you get when ORDER BY is present and no frame is written) to ROWS BETWEEN UNBOUNDED PRECEDING AND CURRENT ROW, and explain why the output differs only when the ORDER BY column has duplicates.
Deliverable: Three verified window queries plus a short note explaining the RANGE versus ROWS difference in your own words.
Practice prompt ↗Practice prompt ↗04The four analytical query patterns
- Write a monthly retention grid: first order month per user, then months-since-first as the column, and verify that month zero equals the cohort size exactly.
- Sessionize the events table under a 30-minute inactivity rule using LAG plus a cumulative sum over a new-session flag.
- Build a four-step funnel that counts distinct users rather than events at each step, and state the rule you applied to a user who reaches step three without ever logging step two.
Deliverable: One file with the retention, sessionization and funnel patterns, each carrying a one-line note on the assumption it bakes in.
Practice prompt ↗Practice prompt ↗Worked solution ↗05Write SQL the way you will have to write it live
- Set a 12-minute timer and solve three medium prompts in a plain editor with no execution and no autocomplete, then run them and tally syntax errors separately from logic errors.
- Narrate one solution aloud while writing it, stating the grain of each intermediate result (one row per user, one row per user-day) before you type its body.
- Rewrite your slowest solution as a CTE chain where every CTE name states its grain, and time yourself re-solving it from blank.
Deliverable: A recording of one narrated solution plus an error tally that separates syntax from logic.
Practice prompt ↗Practice prompt ↗06One day for everything that is not SQL
- Write the preconditions of the two-sample t-test from memory, then check them: independent observations, and a difference in means whose sampling distribution is approximately normal, which at large sample sizes follows from the central limit theorem rather than from normality of the raw values.
- Write the difference between an odds ratio from logistic regression and a relative risk, and state the condition under which the two are close (low outcome prevalence).
- Prepare a 90-second answer to "how would you know this model is any good" that names the metric, the baseline you would beat, and the cost of the errors you care about.
Deliverable: One page of notes covering test preconditions, the odds-ratio caveat and the model-quality answer.
Practice prompt ↗Practice prompt ↗07Full loop rehearsal
- Run a 45-minute mock with someone willing to interrupt: 20 minutes of SQL, 15 minutes defining a metric, 10 minutes on a past project.
- Re-solve from blank the two queries you were slowest on this week and compare the times against day five.
- Write a five-line answer to "walk me through a project" that puts a number in the first sentence and names the decision the work changed.
Deliverable: Mock feedback notes plus a timed project narrative you can deliver without reading it.
Practice prompt ↗Worked solution ↗Expand any day for tasks and deliverables. Your progress is saved on this device.
Interviewers here are not checking whether you can describe a project. They want the decision you made, why you made it under the information you had, and what changed afterwards that someone else could measure. A story that ends at 'I built a model' has no ending. Say what the model caused, or what you stopped doing because of it.
Can you describe a challenging project you led and how you handled the…
Can you describe a challenging project you led and how you handled the roadblocks?
Approach
- State the situation in two sentences and spend the rest on your reasoning.
- Quantify the outcome, including what you would not claim credit for.
- Close with what you would do differently, concretely.
Follow-up
- What would you do differently if you ran that project again?
- What did you decide not to do, and why?
How do you explain complex technical findings to non-technical stakeho…
How do you explain complex technical findings to non-technical stakeholders?
Approach
- Close with what you would do differently, concretely.
- State the situation in two sentences and spend the rest on your reasoning.
- Pick a story where you drove the decision, not one where you observed it.
Follow-up
- How did you know the outcome was caused by your change?
- What would you do differently if you ran that project again?
Announce a metric fix that cuts the headline number
Weekly active organisations, the count on the company dashboard, has never excluded rows where dim_account.is_internal is true, and it counts traffic with traffic_class in synthetic_monitor and load_test. Correcting both reduces that count by 11 percent and removes most of the growth reported over two quarters. The figure appears in a board deck and in two teams' quarterly goals, one written on the count and one on the weekly active organisation ratio, whose denominator is accounts whose account_status was in ('trial','free','active_paid') through the week. Decide the order in which you tell people, what the dashboard shows during the transition, and what you propose happens to goals already set against the old definition.
Approach
- The interviewer is probing whether you can land a correction as an operational change with a plan attached, rather than as an announcement other people then have to clean up after.
- Quantify each exclusion separately before telling anyone: internal accounts, synthetic monitors, load tests. Three known quantities are a discussion; one alarming total is an argument.
- Be precise about which side of the metric each exclusion touches, because one team's goal is on a count and the other's is on a ratio. The traffic-class filters remove requests, so they shrink the numerator only. Dropping internal accounts removes them from the ratio's denominator as well, since internal accounts carry ordinary account_status values and therefore sit in that denominator. Internal accounts are active in almost every week while the real base is not, so the numerator loses a larger share than the denominator and the ratio falls by less than the count does. Compute both and say which one the 11 percent is before anybody assumes.
- Check whether the trend changes, not only the level. A constant 11 percent shift is a rebasing and nothing more. A shift that widens over time means the reported growth was partly internal or synthetic, which makes the existing goals unachievable as written and changes what you are asking teams to do.
- Sequence the disclosure: the metric owner and the two teams whose goals move first and privately, then the board channel with a written bridge, then the dashboard. The dashboard is last because a number that changes without explanation is read as instability rather than as a fix.
- Run both series for one reporting period with the bridge visible, restate history rather than letting the series break at a date, and set the date the old series is removed.
- Propose the goal treatment yourself: rebase each target by the shift measured on the metric that target is written against, rather than leaving each team to negotiate individually, which is where corrections of this kind usually die.
Follow-up
- One team's quarterly goal is now unreachable. Rebase the target or let it miss, and what does each choice teach the organisation?
- How would this have been caught when the metric was first defined?
- What else on that dashboard shares this failure mode, and how would you find out this week?
- 01
Can you describe a challenging project you led and how you handled the roadblocks?
- 02
How do you explain complex technical findings to non-technical stakeholders?
- 03
Weekly active organisations, the count on the company dashboard, has never excluded rows where dim_account.is_internal is true, and it counts traffic with traffic_class in synthetic_monitor and load_test. Correcting both reduces that count by 11 percent and removes most of the growth reported over two quarters. The figure appears in a board deck and in two teams' quarterly goals, one written on the count and one on the weekly active organisation ratio, whose denominator is accounts whose account_status was in ('trial','free','active_paid') through the week. Decide the order in which you tell people, what the dashboard shows during the transition, and what you propose happens to goals already set against the old definition.
Is this an official Iris software interview guide?
No. It is PracHub's own research and practice material for the Data Scientist role at Iris software. Rounds and questions reflect what candidates have reported, not a process Iris software has published, and they change over time. Confirm the current format and scope with your recruiter.
PracHub interview research ↗How difficult are the technical interviews?
The technical rounds are generally considered manageable if you have a strong grasp of fundamental ML concepts. Focus on the core principles rather than obscure edge cases.
PracHub interview research ↗What is the biggest differentiator for successful candidates?
The ability to explain the business impact of your technical work. Companies like Iris software value scientists who understand how their models improve the bottom line.
PracHub interview research ↗How long does the entire process take?
While it varies, candidates should generally expect the process to span several weeks from the first HR screen to the final decision.
PracHub interview research ↗Is the interview process mostly remote or in-person?
Historically, Iris software has utilized a mix of telephonic and video-based technical rounds, with managerial rounds sometimes conducted face-to-face.
PracHub interview research ↗Sources & methodology 3 sources ↗
No official company page is cited. Rounds and questions come from candidate reports and PracHub editorial material; each source shows the date it was read.
- 01PracHub interview research ↗
PracHub editorial research into this company and role, maintained with this guide. Candidate-reported, not an employer publication.
PracHub page · Accessed 2026-09-22 - 02PracHub Data Scientist practice ↗
Cross-company practice questions for this role.
PracHub page · Accessed 2026-09-22 - 03PracHub interview preparation framework ↗
The framework the preparation plan follows.
PracHub page · Accessed 2026-09-22
Explore related engineering environments and compare the preparation focus.
[24]7.ai Data Scientist Interview Questions & Guide 2026
Modeling drills for [24]7.ai data scientist prep: choosing a baseline, reading regression coefficients honestly, handling class imbalance, and defending a model you would actually ship.
Xcellent Technology Solutions Data Scientist Interview Questions & Guide 2026
Modeling drills for Xcellent Technology Solutions data scientist prep: choosing a baseline, reading regression coefficients honestly, handling class imbalance, and defending a model you would actually ship.
Wolters Kluwer Data Scientist Interview Questions & Guide 2026
Causal-inference exercises for Wolters Kluwer data scientist prep: difference-in-differences, matching, instrumental variables, and knowing when observational data simply cannot answer the question asked.
Zscaler Data Scientist Interview Questions & Guide 2026
Data-quality drills for Zscaler data scientist prep: survivorship and selection bias, leakage through time-ordered features, and extreme values where provenance decides the call. A logging fault or unit slip gets corrected or dropped; a gen