As a Data Scientist at Johnson, you occupy a critical position at the intersection of complex data architecture and high-stakes business decision-making. You are responsible for transforming raw data into actionable intelligence that drives strategy, optimizes operations, and enhances product outcomes. Whether you are working within finance, research, or operational teams, your work directly influences how the company navigates its most pressing technical and commercial challenges.
The role demands a balance of rigorous analytical depth and the ability to communicate complex findings to non-technical stakeholders. You will often find yourself operating in a fast-paced environment where your ability to translate ambiguous business problems into structured machine learning or statistical projects is paramount. Success at Johnson requires not just technical mastery, but a proactive mindset that seeks to understand the "why" behind the data to move the needle on key performance indicators.
The role is often highly collaborative; expect to work alongside diverse cross-functional teams, including engineering, finance, and leadership partners.
Virtual Screening
reportedAn extra round usually exists because something is still open after the standard loop: a skill the earlier interviews did not sample, a level decision, or two interviewers who disagreed. It is rarely a rerun of what you already did well. Ask the recruiter who you are meeting, what function they sit in, and how long the session runs. That is an ordinary scheduling question, and the answer changes what you should prepare. What separates a strong candidate here is treating the round as a fresh evaluation with its own bar, rather than assuming earlier performance carries you through or sinks you.
What to demonstrate
- Whether you can answer well on ground the earlier rounds did not cover, without leaning on what you already said to someone else
- Consistency of the facts in your stories: the same sample size, timeframe, team size and scope of your own role as in earlier conversations
- How you handle an unfamiliar format live, including whether you ask what kind of answer is wanted before producing one
How to prepare
- Ask the recruiter for the interviewer's function, the length, and whether to expect a coding surface, a discussion, or a presentation. Preparing for a 30 minute conversation with a partner team is not the same work as preparing for a 60 minute technical block.
- Write out what each earlier round actually covered, then list the two or three areas nobody probed. That gap is the most likely subject of the extra round.
- Re-read the numbers in the project stories you have already told, so a second telling does not quietly contradict the first.
Technical Presentation
reportedA handful of shapes account for most of what gets asked in this format: a ranking or deduplication inside groups, a running or rolling total, a period-over-period comparison, and a cohort tracked forward over time. Recognising the shape quickly is most of the speed here; deriving it from scratch while a clock runs is where the time goes. Know that a window function keeps every row while a GROUP BY collapses them, and know which one the question needs. If the exercise is in Python instead of SQL, the same shapes arrive as groupby with transform, shift and merge, and the same grain mistakes are available.
What to demonstrate
- Whether you reach the right construct without a detour, such as ROW_NUMBER over a partition to deduplicate instead of a self-join against a MAX subquery
- Whether you know what your window frame actually is, since adding ORDER BY inside OVER changes the default frame and silently changes a running total
- Whether the thing runs. A near-miss that throws an error scores below a plainer query that returns the right rows.
How to prepare
- Write each of the four shapes once from memory against a small schema and keep the working version somewhere you will reread it: dedupe with ROW_NUMBER, a running total, a month-over-month change with LAG, and a retention table
- Compute one running total twice on data with tied timestamps, once on the default frame and once with ROWS BETWEEN UNBOUNDED PRECEDING AND CURRENT ROW, and look at where the two disagree
- If Python is on the table, rebuild the dedupe and the running total with groupby and cumsum, then assert the two implementations return identical rows
Panel Interviews
reportedA loop is not scored one interview at a time. The people you meet compare notes afterwards, usually in a meeting you are not in, and the outcome turns on what each of them can say about you when asked. That rewards something other than survival: every room needs one specific thing worth repeating, and none of them can contradict another. The common way to lose is to tell the same project four times with different numbers in it, or to be uniformly fine in a way that leaves nobody with anything to argue for.
What to demonstrate
- Whether your account of a project survives being told twice, with the same scale, the same metric definition and the same numbers each time
- Whether each interviewer leaves with one concrete claim they could make on your behalf later, rather than an absence of complaints
- Whether a question you already answered in an earlier room gets the same answer at the same depth, without visible impatience
How to prepare
- Write a one-page fact sheet for your two or three main projects that fixes the numbers you will quote: rows of data, the metric as a single sentence, the effect you measured and how long the work took. Say them aloud from the sheet until they come out identical every time
- For each kind of room you expect, decide the one sentence you want that interviewer repeating in a debrief, then check during the mock that you said it outright instead of implying it
- Rehearse answering the same project question twice in one sitting, the second time as though you had not just answered it, because the thing that needs fixing is the flatness that creeps into a repeated story
Final Decision-Making
reportedA day of back-to-back interviews samples your floor, not your ceiling. Four hours in, the habits that carry a good answer are the first to go: restating the question before solving it, asking what the data would have to look like, checking a number before quoting it. What the day decides is whether the tired version of you is still someone to leave alone with an ambiguous problem. The round that sinks a candidate is usually not the hardest one. It is the one immediately after the round that went badly.
What to demonstrate
- Whether the late rounds get the same clarifying questions as the first one, or whether you start answering immediately to save effort
- Whether a weak answer stays in the room it happened in, instead of following you into the next conversation as apology or distraction
- Whether the quality of your questions holds up, since fatigue removes curiosity about the problem before it removes knowledge of the method
How to prepare
- Rehearse the length, not just the content: book four mock interviews of different types in one afternoon with short gaps, because the one you need to observe is the fourth
- Put the two or three questions you ask at the start of any problem on a card in front of you, so that under fatigue it is a habit you run rather than a decision you make
- Decide in advance what the gap between rooms is for: water, one line of notes on anything you promised to follow up, and an explicit close on the round that just ended so it does not travel
- Prepare a different closing question for each interviewer, so the end of a long day does not produce the same one four times
PracHub editorial advice for the preparation topics above.
Treating last-touch attribution as the causal value of a channel
The attribution label on dim_user is the output of a rule that assigns full credit to whichever touch happened to be recorded last inside a lookback window, and that rule systematically rewards channels that sit close to the conversion, especially branded search and retargeting, which largely intercept demand that already existed. Reallocating spend on those labels moves budget toward the channels that are best at being last, which is why attributed return on ad spend often improves while total signups do not. Nothing in the touchpoint data can settle this, because the counterfactual of not running the channel was never observed. The credible reads are a geo holdout or a scheduled pause, sized in advance on the total-signups metric rather than on the attributed one, and the honest framing in the meantime is that the label describes correlation with conversion and not incremental contribution.
Counting on an identity key that changes underneath the metric
visitor_id is per browser and per device, and it resets on cookie clearance, private browsing and platform privacy changes, so the distinct-visitor count drifts upward for reasons unrelated to reach. Any rate with visitors in the denominator therefore decays over time even when behaviour is constant, and any rate with visitors in the numerator inflates. The stitching at signup makes it worse in both directions: a user who signed up on mobile and returns on desktop is two visitors and one user, while a shared device is one visitor and several users. Decide which key each metric is counted on, write it into the definition, and when comparing a period before and after a platform privacy change, expect a level shift in every visitor-keyed metric and do not attribute it to the product.
Never asking what decision the analysis will inform
Open with who makes the decision, what the options are, and by when. The answer determines the precision you need, the segments worth cutting, and whether an observational read suffices or an experiment is required.
Averaging per-user rates to produce a population rate
Decide which quantity you want: the mean of per-user ratios and the ratio of summed numerator to summed denominator are different estimands, and heavy users dominate one but not the other. For a ratio metric, aggregate numerator and denominator separately and use the delta method for its variance.
Choose a category, try a prompt, then open its approach, worked solution or follow-up when you need it.
Can you explain the difference between supervised and unsupervised lea…
Can you explain the difference between supervised and unsupervised learning in a real-world project context?
Approach
- Check what information would not exist at prediction time, and exclude it.
- Pick an evaluation metric that matches the cost of each error type, not a default.
- Say how the offline result would be validated online before it is trusted.
Follow-up
- Where could label leakage enter this setup?
- What would you monitor after launch to know the model is still valid?
What are the limitations of the machine learning methods you have used…
What are the limitations of the machine learning methods you have used in your previous projects?
Approach
- Frame the prediction: the label, the moment of prediction, and the action it triggers.
- Say how the offline result would be validated online before it is trusted.
- Check what information would not exist at prediction time, and exclude it.
Follow-up
- What would you monitor after launch to know the model is still valid?
- How would you choose the decision threshold, and who owns that choice?
How do you approach model deployment and monitoring in a production en…
How do you approach model deployment and monitoring in a production environment?
Approach
- Set a baseline first, so any model has something honest to beat.
- Pick an evaluation metric that matches the cost of each error type, not a default.
- Say how the offline result would be validated online before it is trusted.
Follow-up
- Where could label leakage enter this setup?
- What would you monitor after launch to know the model is still valid?
Audit a one-day event extract for structural defects
You receive a one-day extract of fct_event as a DataFrame with event_id, occurred_at_utc, received_at_utc, visitor_id, user_id, account_id, event_name, is_bot_flagged and surface. Write a function returning one row per data-quality rule with the rule name, the failing row count and the failing share of the extract. Cover at minimum: duplicate event_id, received_at_utc earlier than occurred_at_utc, occurred_at_utc later than the extract's maximum received_at_utc, account_id present while user_id is NULL, and rows whose occurred_at date differs from their received_at date. Do not drop rows; report only.
Approach
- Compute the extract's own reference clock first: max(received_at_utc). Wall-clock now() is wrong here because the extract may be replayed days later, which would turn every row into a future-dated failure.
- Express each rule as a boolean Series over the same index so the checks compose, then aggregate with .sum() and divide by len(df). Building a list of (name, mask) pairs keeps the rule set extensible and keeps one code path for counting.
- For the duplicate rule, decide and state the convention: df.duplicated('event_id', keep=False).sum() counts every member of a duplicated group, df.duplicated('event_id').sum() counts only the surplus copies. Either is defensible; an unstated choice is not. The rest of this item assumes keep=False.
- Treat received_at < occurred_at as clock skew, not corruption: occurred_at is client-supplied. Separate it from the date-mismatch rule, which is the one that actually breaks a daily metric keyed on occurred_at.
- Know which rules imply which before you read the counts. A row whose occurred_at exceeds max(received_at_utc) has its own received_at no later than that maximum, so it is necessarily a clock-skew row as well: the future-dated mask is a subset of the skew mask, always. Neither is a subset of the date-mismatch mask, because skew of a few minutes inside one UTC date mismatches nothing.
- Return a tidy DataFrame sorted by failing_share descending, and add a boolean column saying whether the rule should block publication, so the output is a decision rather than a list of numbers.
Worked solution 20 min
- Parse both timestamp columns with utc=True and assert the dtype, since a silently-object column makes every comparison string-wise and wrong.
- Set ref = df['received_at_utc'].max() and build the five masks against it.
- Assemble results as pd.DataFrame(rows) with columns rule, failing_rows, failing_share, blocks_publication.
- Keep the masks addressable (a dict of name to Series) rather than only their sums, so the overlap between rules can be asserted rather than assumed.
- Verify the function is pure: assert the input frame's shape is unchanged after the call.
Follow-up
- The date-mismatch count is 2.1 percent on this extract. What late-arrival rule would you write for a daily metric, and how many days would you hold the number open?
- Duplicate event_id values appear only on the 'core_action_completed' event. What upstream cause would you check before deduplicating?
- Which of these rules should fire an alert at the pipeline, and which should only appear in a weekly review?
Paying accounts with no active seat in 28 days
dim_account holds account_id, account_type, lifecycle_status, seats_licensed. fct_event holds account_id, user_id, occurred_at_utc, is_core_action, and its account_id is NULL for every signed-out and pre-signup event. Find accounts with lifecycle_status = 'active' and account_type <> 'internal' that had no distinct user complete a core action in the trailing 28 days. Return account_id, seats_licensed and days since that account's most recent core action, with NULL where the account has never emitted one. Order by seats_licensed descending.
Approach
- Build the recent-activity set first: fct_event rows with is_core_action = TRUE, occurred_at_utc >= now() - interval '28 days', and an explicit account_id IS NOT NULL. Making the NULL exclusion explicit in the CTE is what lets you reason about the anti-join afterwards.
- Express the exclusion with NOT EXISTS (correlated on account_id) or a LEFT JOIN with an IS NULL guard. Do not use NOT IN against this column: it is nullable, and SQL's three-valued logic turns the whole predicate UNKNOWN, returning zero rows.
- Compute last-seen separately as MAX(occurred_at_utc) per account over all history, LEFT JOINed on, so an account that has never emitted a core action (NULL) is distinguishable from one that went quiet six weeks ago. Those two cases have different causes and different owners.
- Rank by seats_licensed, or better by the account's current mrr_cents_constant_fx if you are allowed the subscription table, because a silent fifty-seat account is a renewal conversation and a silent one-seat account is noise.
- Before shipping, check whether the never-seen group is a cluster by signup date or surface. A block of accounts with no events at all is usually an instrumentation gap, not a set of customers who stopped using the product.
Worked solution 25 min
- Count NULL account_id rows in fct_event over the window so you know the trap is live in this data rather than hypothetical.
- Write the active-account spine and the 28-day activity CTE.
- Write the anti-join with NOT EXISTS, then deliberately run the NOT IN version and record that it returns zero rows.
- Add the all-time MAX(occurred_at_utc) LEFT JOIN and derive days_since as a date difference.
- Split the output into 'quiet' and 'never seen' and eyeball the never-seen group for a shared signup window or surface.
Follow-up
- How would you distinguish a genuinely idle account from one whose events lost their account_id after an instrumentation change?
- Would you count on fct_event.account_id or resolve user_id through dim_user instead, and what does each choice miss?
- Licensed-seat utilisation is the continuous version of this. How would you turn this boolean into that ratio?
Seven-day activation rate by weekly signup cohort
dim_user holds user_id, account_created_at_utc, is_internal. fct_event holds user_id, occurred_at_utc, is_core_action. A user is activated when core-action events fall on at least two distinct UTC dates inside [account_created_at_utc, account_created_at_utc + 7 days). Return, for the last twelve complete weekly signup cohorts, the cohort week, cohort size, activated users and the activation rate. Exclude is_internal users. Every signup in the cohort week stays in the denominator, including users who never returned.
Approach
- Start from dim_user as the denominator spine with is_internal = FALSE and DATE_TRUNC('week', account_created_at_utc) as the cohort key. Driving the query from the event table instead would silently condition on having events and delete the entire non-activating population.
- Join fct_event on user_id with is_core_action = TRUE and a per-user bound, occurred_at_utc >= u.account_created_at_utc AND occurred_at_utc < u.account_created_at_utc + interval '7 days'. The bound is correlated to each user's own signup timestamp, not a single global date range.
- Aggregate per user with COUNT(DISTINCT occurred_at_utc::date) >= 2, then LEFT JOIN that back onto the spine and COALESCE the flag to FALSE so non-activators contribute a zero rather than vanishing.
- Restrict the published cohorts to those whose week ended at least eight days ago. A cohort younger than that has not finished its seven-day window, so its rate is mechanically low and reads as a decline.
- Roll up by summing the numerator and denominator per cohort week, and state the two-distinct-days threshold next to the number since it is a choice that re-bases the whole history if changed.
Follow-up
- Why two distinct days rather than one event? What happens to the published history if someone changes it to three?
- Invited seats and SSO-provisioned users get an account_created_at_utc at provisioning and may never sign in. Should they be in this denominator?
- The rate rose 3 points this week. What do you check before believing it?
Walk me through the most challenging project on your resume—what were …
Walk me through the most challenging project on your resume—what were the trade-offs you made?
Approach
- Decompose the metric into the rates that drive it, and say which one you would check first.
- Name one primary metric, then the guardrail that stops it being gamed.
- Restate the decision this analysis has to support, and who acts on the answer.
Follow-up
- How would you detect that the metric is being gamed rather than genuinely improving?
- Which segment would you cut first, and what would that rule out?
If a project isn't showing the expected ROI, how do you decide whether…
If a project isn't showing the expected ROI, how do you decide whether to pivot or continue?
Approach
- Name one primary metric, then the guardrail that stops it being gamed.
- Fix the population and the time window before naming any metric.
- Restate the decision this analysis has to support, and who acts on the answer.
Follow-up
- Which segment would you cut first, and what would that rule out?
- What would you do if the primary metric and the guardrail moved in opposite directions?
How would you approach a situation where the data is incomplete or noi…
How would you approach a situation where the data is incomplete or noisy?
Approach
- State what result would change your recommendation, so the answer is falsifiable.
- Decompose the metric into the rates that drive it, and say which one you would check first.
- Name one primary metric, then the guardrail that stops it being gamed.
Follow-up
- Which segment would you cut first, and what would that rule out?
- What would you do if the primary metric and the guardrail moved in opposite directions?
If you had more time, what would you have done differently in your pre…
If you had more time, what would you have done differently in your previous research?
Approach
- Work from the decision backwards to the evidence you would need.
- State your assumptions explicitly before working the problem.
- Clarify what is being asked and what a complete answer would contain.
Follow-up
- How would you know your answer was wrong?
- What assumption would you test first?
Randomise a shared workspace feature without contaminating control
A feature changes a collaborative surface inside a workspace: when one member uses it, other members of the same account see the result in their own view. You have dim_user (user_id, account_id, is_internal), dim_account (account_id, seats_assigned, lifecycle_status) and fct_event. Among active accounts the mean seats_assigned is 6, the coefficient of variation of that count is 1.5, and the intraclass correlation of the weekly core-action rate within an account is 0.10. Choose the randomisation unit, quantify what that choice costs in sample, and specify how you would compute inference.
Approach
- State the interference before choosing anything: a treated user changes what an untreated colleague sees, so user-level randomisation puts both arms inside one account and biases the contrast toward zero. Randomise on account_id.
- Price the clustering properly. With equal clusters the design effect is 1 + (m - 1) rho = 1 + 5(0.10) = 1.5. Sizes here are far from equal, so use 1 + ((CV^2 + 1) m - 1) rho = 1 + (3.25 x 6 - 1)(0.10) = 2.85. The equal-size shortcut understates the cost by nearly half.
- Decide the estimand before the estimator. An account-weighted mean gives every workspace one vote; a user-weighted mean lets the largest workspaces dominate. With this size skew the two can move in opposite directions, so pick the one the decision needs and write it down.
- Compute standard errors on the account, not the user: cluster-robust on account_id, or collapse each account to a single number and test those. Below roughly 40 clusters per arm, cluster-robust errors are biased downward, so use a wild cluster bootstrap or randomisation inference over the assignment.
- Buy back variance where you can. Stratify assignment by seat band and lifecycle_status before randomising, and decide in advance how the handful of very large accounts are handled, since one enterprise workspace can carry more users than a hundred single-seat ones.
Worked solution 30 min
- Write the interference down: the outcome for user i depends on the treatment of other users in account(i), so the no-interference assumption fails at the user level and holds at the account level.
- Compute both design effects, 1.5 equal-size and 2.85 unequal-size, and use 2.85.
- Take the user-level sample requirement from the proportion shortcut, multiply by 2.85, then divide by the mean of 6 users per account to express it in accounts per arm.
- Specify the analysis: collapse to one row per account, regress the account-level outcome on variant with stratum fixed effects, and use a wild cluster bootstrap for inference.
- State the stopping rule up front: if the required account count exceeds the eligible population, the test is not runnable, and the alternatives are a longer window, a larger target effect, or a non-experimental read.
Follow-up
- Suppose the feature is not workspace-scoped but changes a globally shared ranking model, so no clean cluster exists. What design gets you a causal read, and what does it cost you?
- You have 900 eligible active accounts in total. Given the design effect, what absolute lift can this test detect, and is the honest answer 'do not run it'?
- The intraclass correlation is an estimate from last quarter. What happens to your sizing if the true value is 0.25?
A conversion rate that fell in one regulatory region
Visit-to-signup conversion fell 1.3 points over six weeks. Signups cut by dim_user.country_code put the fall in one regulatory region where a consent banner shipped in week one, but absolute signups from that region are flat. fct_session carries consent_state, visitor_id, is_bot_flagged and session_date and no country column, so the denominator cannot be cut the same way. Using fct_session and fct_event, decide whether behaviour changed or the denominator did, state what these tables cannot settle, and name the one column that would settle it.
Approach
- Name the asymmetry before computing anything. The numerator is user-keyed and therefore cuttable by country; the denominator is visitor-keyed and is not. Dividing a region-filtered numerator by an unfiltered denominator produces a quantity that is not a rate, and presenting it as a regional conversion rate is the first mistake available here.
- Attack the denominator on the dimension you do have. Compute distinct visitor_id per week and sessions per distinct visitor_id per week: a consent banner that blocks or shortens the identity cookie raises the distinct-visitor count and lowers sessions per visitor, which depresses any visitor-keyed rate with no behaviour behind it.
- Split on consent_state. Sessions with consent_state = 'denied' can enter the denominator but can never be joined forward to a signup, so a rising denied share mechanically drives the pooled rate down by roughly its own share. Report the granted-only rate and the denied share as two separate numbers rather than one blended figure.
- Cross-check with measures that do not depend on the visitor key at all: absolute weekly signups, which are given as flat, and signups per session rather than per visitor.
- State the limit honestly. Without country on the session or on its entry event, the regional attribution rests on the numerator alone, and the correct request is that one column, not a more elaborate model on top of the data you have.
Follow-up
- If granted-only conversion is the metric going forward, what selection bias have you accepted, and in which direction does it point?
- How would you handle the six weeks of already-published history once the new definition is adopted?
- What is the smallest instrumentation change that restores a cuttable denominator without collecting more personal data than before?
For a candidate whose interviews will centre on A/B testing, metric movement and causal claims. Design comes before arithmetic, arithmetic before analysis, and the week ends by rehearsing the readout rather than the derivation.
Prepare, practise & reflect
One practical outcome each day. Spend longer where you need it.
0 / 7 done01Design one test end to end on paper
- Take a single feature change and write the full design: randomization unit, the exact point of exposure, the primary metric with its grain, guardrails, allocation, planned duration, and the decision rule committed before any data exists.
- Write why the randomization unit must sit at or above the level where treatment can spill over, and give one case where user-level randomization is still contaminated (shared accounts or devices, or two participants in the same marketplace).
- State in advance what you will do if the primary metric is flat while a secondary metric is significant.
Deliverable: A one-page test design with a decision rule written before launch.
Practice prompt ↗Practice prompt ↗Practice prompt ↗Worked solution ↗02Power arithmetic until it is automatic
- Compute required sample size per arm for a binary metric with the normal approximation, n is approximately 2 times (z for alpha/2 plus z for power) squared times p(1 minus p) divided by delta squared, for baselines of 2, 10 and 40 percent at a 5 percent relative lift, and note that for a fixed relative lift the requirement falls as the baseline rises because delta grows proportionally with p.
- Redo the calculation for a continuous metric using variance in place of p(1 minus p), and show why a heavy-tailed quantity such as revenue per user needs either far more traffic or a capped version with a stated cap.
- Convert one of the results into weeks given a weekly eligible traffic figure, then list the two honest ways to shorten it (accept a larger detectable effect, or reduce variance) and write why quietly lowering the power target is a decision to miss more real wins, not a speedup.
Deliverable: A small script or sheet that maps baseline, minimum detectable effect, alpha and power to sample size and weeks, cross-checked against a published calculator.
Practice prompt ↗Practice prompt ↗03Variance and the unit-of-analysis problem
- Take a ratio metric whose denominator is not the randomization unit (clicks per session, randomized by user) and compute the standard error twice, once naively at session level and once by the delta method or a user-level bootstrap, then record how much the naive version understates it.
- Implement CUPED on simulated data: choose a pre-period covariate X measured before assignment, estimate theta as Cov(Y, X) divided by Var(X), and analyse Y minus theta times (X minus its mean) in place of Y. Confirm the variance of the adjusted outcome equals the raw variance multiplied by one minus the squared correlation between Y and X, so a correlation of 0.45 removes about 20 percent of the variance and not 80.
- Now run that simulation a few hundred times and confirm the adjusted effect estimate is unbiased for the same effect rather than numerically identical to the raw one. Within any single run the two differ, sometimes by a large fraction of the true effect, because the two arms' pre-period covariate means never coincide exactly in a finite sample; they agree in expectation, which is the property that matters and the one to state out loud.
Deliverable: A notebook showing the adjusted estimator with a measurably smaller variance than the raw one, plus a repeated-simulation table showing the two estimators agreeing on average while differing run by run.
Practice prompt ↗Practice prompt ↗04Validity threats you can actually test for
- Run a sample ratio mismatch check as a chi-square goodness-of-fit test against the intended allocation, and write the three causes you would chase first (assignment logged before exposure, an arm-specific redirect or load failure, bot filtering applied asymmetrically).
- Simulate peeking: generate A/A data, test daily at alpha 0.05 across 14 looks, record the inflated false positive rate, then apply an alpha-spending boundary or commit to a fixed horizon and confirm the rate returns to nominal.
- Write how you would separate a novelty effect from a durable lift using the treatment effect plotted against days since first exposure, and what shape would change your recommendation.
Deliverable: One table showing the peeking false positive rate before and after correction, plus a written SRM triage list.
Practice prompt ↗Practice prompt ↗Worked solution ↗05When randomization is not available
- Write the identifying assumption for difference-in-differences (parallel trends in the absence of treatment), then plot pre-period trends for two candidate control groups and justify rejecting one of them.
- Design a switchback test for a change where user-level randomization would leak across participants, choosing a time-block length against the carryover you expect and saying how you would detect carryover in the data.
- List what an interrupted time series or a synthetic control buys you and the one thing neither can rule out: an unobserved shock that coincides with the launch.
Deliverable: A one-page memo recommending a single quasi-experimental design and naming its weakest assumption explicitly.
Practice prompt ↗Practice prompt ↗06The readout query
- Write the assignment-to-exposure join that returns exactly one row per unit per experiment, and handle units appearing in both arms by excluding and counting them rather than silently keeping one.
- Compute the per-arm metric, its variance and the relative lift with a confidence interval in SQL, then reproduce the identical numbers in a notebook as a cross-check.
- Add a segment breakdown and write the sentence that keeps it from being p-hacking: segments declared in advance, everything else reported as exploratory and corrected for multiplicity.
Deliverable: A single query that outputs the full readout table, matched to a notebook recomputation.
Practice prompt ↗Practice prompt ↗07Present it to someone who will not read the appendix
- Give a 10-minute readout of a real or simulated experiment in the order decision, number, uncertainty, caveat.
- Have your listener ask "can we ship it" in the case where the primary is flat and a guardrail moved, and answer with a recommendation rather than a request for more data.
- Rewrite your opening line so the recommendation lands before any methodology.
Deliverable: A one-page readout whose first line is the recommendation.
Practice prompt ↗Practice prompt ↗Worked solution ↗Expand any day for tasks and deliverables. Your progress is saved on this device.
A number you shipped turned out to be wrong, and someone had already acted on it. That is one of the most useful stories a data person can carry. What is being scored is how fast you noticed, who you told first, and what you changed in the process so the same class of error could not repeat quietly.
How do you explain the limitations of your model to a non-technical st…
How do you explain the limitations of your model to a non-technical stakeholder?
Approach
- State the situation in two sentences and spend the rest on your reasoning.
- Close with what you would do differently, concretely.
- Pick a story where you drove the decision, not one where you observed it.
Follow-up
- How did you know the outcome was caused by your change?
- What would you do differently if you ran that project again?
How do you prioritize tasks when you have multiple stakeholders with c…
How do you prioritize tasks when you have multiple stakeholders with competing interests?
Approach
- Quantify the outcome, including what you would not claim credit for.
- Name the disagreement or constraint, and how you resolved it with evidence.
- Close with what you would do differently, concretely.
Follow-up
- What did you decide not to do, and why?
- How did you know the outcome was caused by your change?
Defend a flat experiment readout against a post-hoc segment
A feature you evaluated is flat on seven-day activation: +0.05pp with a 95% interval of [-0.47pp, +0.57pp], from 61,000 exposed users per arm in fct_experiment_exposure joined to dim_user and fct_event. Baseline activation is 32%. The launch team asks you to drop every surface except mobile_web, where the point estimate is +1.1pp, and re-run. You have ten minutes in their planning meeting. Deliver a spoken position: what you will and will not do, and the decision you recommend.
Approach
- Recognise what is being probed: whether you hold a statistical position under social pressure without becoming either rigid or apologetic. A generic answer says the segment is not significant; a strong one separates the request into a question that is answerable (is the mobile_web number real?) and one that is not (can we ship on it?), and answers both.
- Price the multiplicity out loud. The slice was chosen after seeing the results, so its estimate is selected on favourable noise and is biased away from zero. With k independent looks at a nominal 5% level, the chance of at least one false positive is 1 - 0.95^k: 26% at six segments, 64% at twenty. Quote the k you actually inspected, not the k you reported.
- Use the arithmetic already in front of you. On the point estimates, a +1.1pp mobile_web effect combined with a pooled +0.05pp implies the remaining surfaces average negative in proportion to mobile_web's share of exposures. State that as a testable implication of their story rather than as a rebuttal of it.
- Ask the one question that settles the category: was mobile_web named in the analysis plan before launch? If it was, it is a planned comparison and gets a corrected reading. If it was not, it is a hypothesis, and the honest move is to size the test that would confirm it.
- Convert the refusal into a cost. Size a mobile_web-only confirmatory test at the claimed effect, state the weeks of mobile_web traffic it needs, and close with the recommendation: do not ship this as a lift, and note that the interval already rules out anything at or above +0.6pp, which is itself a useful input to the roadmap.
Follow-up
- The confirmatory test you sized needs nine weeks of mobile_web traffic and the team has three. What do you recommend instead?
- Suppose mobile_web was pre-registered. How does your reading change, and what correction do you apply?
- Your interval excludes +0.6pp. Is that the same as saying the feature does nothing?
- 01
How do you explain the limitations of your model to a non-technical stakeholder?
- 02
How do you prioritize tasks when you have multiple stakeholders with competing interests?
- 03
A feature you evaluated is flat on seven-day activation: +0.05pp with a 95% interval of [-0.47pp, +0.57pp], from 61,000 exposed users per arm in fct_experiment_exposure joined to dim_user and fct_event. Baseline activation is 32%. The launch team asks you to drop every surface except mobile_web, where the point estimate is +1.1pp, and re-run. You have ten minutes in their planning meeting. Deliver a spoken position: what you will and will not do, and the decision you recommend.
Is this an official Johnson interview guide?
No. It is PracHub's own research and practice material for the Data Scientist role at Johnson. Rounds and questions reflect what candidates have reported, not a process Johnson has published, and they change over time. Confirm the current format and scope with your recruiter.
PracHub interview research ↗How long does the entire interview process take?
It varies significantly by team and location, but it typically ranges from 4 to 8 weeks. Expect potential delays during holiday seasons or due to the complexity of scheduling multiple senior stakeholders.
PracHub interview research ↗What is the most important thing to prepare for?
Your past projects. You will be questioned extensively on the "how" and "why" of your previous work, so ensure you have a deep, intuitive understanding of every line of code and every model decision you've made.
PracHub interview research ↗Is the technical interview focused on LeetCode-style questions?
While some coding is common, Johnson leans more towards practical, project-based technical questions and system design rather than obscure algorithmic puzzles.
PracHub interview research ↗How can I stand out during the interview?
Demonstrate curiosity. Ask thoughtful questions about the team's current data challenges, the company’s long-term data strategy, and how your role specifically contributes to their goals.
PracHub interview research ↗Sources & methodology 3 sources ↗
No official company page is cited. Rounds and questions come from candidate reports and PracHub editorial material; each source shows the date it was read.
- 01PracHub interview research ↗
PracHub editorial research into this company and role, maintained with this guide. Candidate-reported, not an employer publication.
PracHub page · Accessed 2026-09-22 - 02PracHub Data Scientist practice ↗
Cross-company practice questions for this role.
PracHub page · Accessed 2026-09-22 - 03PracHub interview preparation framework ↗
The framework the preparation plan follows.
PracHub page · Accessed 2026-09-22
Explore related engineering environments and compare the preparation focus.
Fetch Rewards Data Scientist Interview Questions & Guide 2026
Product-sense practice for a Fetch Rewards data scientist interview: define a product and business analytics metric, pick its guardrails, and argue why a tempting alternative would mislead you.
1 digit technology Pvt Data Scientist Interview Questions & Guide 2026
Take-home style practice for data scientists preparing for 1 digit technology Pvt: a messy dataset, a fixed time budget, and a written analysis, reviewed for whether it states its assumptions and whether a reader could reproduce your number
xAI Data Scientist Interview Questions & Guide 2026
Communication practice for xAI data scientist candidates: turn an analysis into a recommendation, name the uncertainty honestly, and answer the follow-up a skeptical stakeholder will raise.
Windfall Data Scientist Interview Questions & Guide 2026
Data-quality drills for Windfall data scientist prep: survivorship and selection bias, leakage through time-ordered features, and extreme values where provenance decides the call. A logging fault or unit slip gets corrected or dropped; a ge