Lorikeet hires Software Engineers; this guide collects what candidates report about the process.
Preparation focus
editorialNo round sequence has been reported for this company, so confirm the format with your recruiter and work the reported questions below.
What to demonstrate
- Breadth across the topics this company reports testing
- Whether you confirm the format before preparing for it
How to prepare
- Ask the recruiter for the sequence, the duration of each stage and whether you will be writing code
- Work the reported questions below and time yourself
PracHub editorial advice for the preparation topics above.
Own your decisions
When asked about a trade-off, be clear about why you chose one path over another. There is rarely a "perfect" solution, but there is always a reasoned one.
Ask questions
Use your time with the founders to ask about the long-term vision of the product. It shows you are thinking like an owner, not just a contributor.
Be ready for the trial
Treat the work trial like a real day at the office. Ask clarifying questions early and keep your stakeholders updated on your progress.
Do not hesitate to clarify requirements during your work trial
Making assumptions that lead to the wrong output is a common mistake that can be easily avoided by asking questions early.
Choose a category, try a prompt, then open its approach, worked solution or follow-up when you need it.
How would you approach building this specific feature from scratch?
How would you approach building this specific feature from scratch?
Approach
- Restate the input: its shape, its size, and what is guaranteed about it.
- Name the brute-force solution and its complexity before improving on it.
- Choose the data structure from the access pattern, not from familiarity.
- State the target complexity and say which constraint rules the naive version out.
Follow-up
- How does this change if the input no longer fits in memory?
- What is the worst case, and how likely is it on real data?
Can you walk me through the trade-offs you made in your most recent project?
Can you walk me through the trade-offs you made in your most recent project?
Approach
- Restate the input: its shape, its size, and what is guaranteed about it.
- Name the brute-force solution and its complexity before improving on it.
- Choose the data structure from the access pattern, not from familiarity.
- State the target complexity and say which constraint rules the naive version out.
Follow-up
- How does this change if the input no longer fits in memory?
- What is the worst case, and how likely is it on real data?
How do you ensure your code is testable and maintainable under tight deadlines?
How do you ensure your code is testable and maintainable under tight deadlines?
Approach
- Restate the input: its shape, its size, and what is guaranteed about it.
- Name the brute-force solution and its complexity before improving on it.
- Choose the data structure from the access pattern, not from familiarity.
- State the target complexity and say which constraint rules the naive version out.
Follow-up
- How does this change if the input no longer fits in memory?
- What is the worst case, and how likely is it on real data?
Explain why the owner filter ignores the listing index
The only index on resource is (tenant_id, status, updated_at DESC, resource_id DESC). A new endpoint returns one user's resources across all statuses, newest created first: WHERE tenant_id = $1 AND owner_user_id = $2 ORDER BY created_at DESC LIMIT 20. On a tenant with 2M rows it takes 900 ms and EXPLAIN shows a sort above a large scan. Explain precisely why the existing index cannot serve it, give the index that can, and state which of these the new index still will not help: owner_user_id alone across tenants; the same query ordered by updated_at. PostgreSQL 16.
Approach
- Separate the two jobs an index does. For filtering, a composite btree is seekable only on a left prefix, so with no predicate on status the scan can at best range over tenant_id and test owner_user_id per row; PostgreSQL 16 has no btree skip scan to jump the unconstrained column.
- For ordering, the index is sorted by (status, updated_at) within a tenant and not by created_at, so the LIMIT cannot stop early: every matching row is read and then sorted. That is the 'Sort Method: top-N heapsort' line, and it is why the plan reads 2M rows to answer with 20.
- Derive the replacement from the access path — equality, equality, then the ordering column: CREATE INDEX CONCURRENTLY ON resource (tenant_id, owner_user_id, created_at DESC). The scan seeks to the (tenant, owner) range and walks 20 entries in order, so the Sort node disappears along with the row-read.
- Treat INCLUDE (title, status) as conditional, not free. An index-only scan still visits the heap for any row whose page is not marked all-visible, so on a table taking 1.2k writes/second the win depends on autovacuum keeping the visibility map current, and the wider index costs more on every insert.
Follow-up
- 90% of rows are status='active'. Would a partial index WHERE status = 'active' change your answer, and for which of the three queries?
- A dashboard runs this for 40 owners in one page load. What changes about the design?
Keep soft-deleted accounts from blocking re-registration
app_user holds user_id, tenant_id, email CITEXT, password_hash (NULL for SSO principals), email_verified_at, auth_version, status ('invited','active','suspended','deactivated'), created_at, updated_at, deleted_at. Two live accounts for one address inside a tenant must be impossible, but an address freed by a soft delete must be reusable, and the same tenant may delete and re-register it repeatedly. Write the uniqueness DDL for PostgreSQL 16, then the equivalent for MySQL 8 where partial indexes do not exist, and say what each permits once three deleted rows already hold that address.
Approach
- Start from what is actually unique: not (tenant_id, email), but (tenant_id, email) among live rows. PostgreSQL says that directly — CREATE UNIQUE INDEX app_user_live_email ON app_user (tenant_id, email) WHERE deleted_at IS NULL. A full constraint over the same two columns burns the address permanently the first time someone deletes an account.
- Keep case-insensitivity in the type or the index, never in the application: CITEXT as given, or UNIQUE (tenant_id, lower(email)) as an expression index where the extension is unavailable. A case-sensitive unique column is exactly how two accounts for one human appear.
- For MySQL 8 the predicate has to move inside the key: add a discriminator column that is a constant 0 while the row is live and is set to user_id on delete, with UNIQUE (tenant_id, email, deleted_marker). Live rows share the constant and still collide; deleted rows differ from each other and stop colliding.
- State the NULL variant and its dependency: leaving the marker NULL for deleted rows also works, because a unique index treats NULLs as distinct — true in MySQL, and true in PostgreSQL only under the default NULLS DISTINCT, which PostgreSQL 15 lets you reverse. Check the polarity against the three existing deleted rows: constant-on-live is what preserves the collision you want, and reversing it silently admits duplicate live accounts.
Follow-up
- A deleted account re-registers with the same address the next day. Do the old resource rows follow the new user_id, and how does the API keep the two principals apart?
- How do you honour an erasure request while resource_revision.actor_user_id still references this table?
How do you handle edge cases when implementing a new API integration?
How do you handle edge cases when implementing a new API integration?
Approach
- Say who the caller is and what they do when the call fails halfway.
- Define the identity of a request so a retry cannot double-apply it.
- Separate accepted, pending, failed and confirmed; they are different facts.
- Design the error taxonomy before the success shape; callers branch on it.
Follow-up
- What happens if the caller retries after a timeout?
- How does a client discover it is on an old version of this contract?
Choose what to break when replication lag reaches forty seconds
Reads are served from two replicas: 14k requests/second, about 85% absorbed by cache, so roughly 2.1k reads/second reach the database. Writes go to the primary at 1.2k/second. A tenant's backfill drives replication lag from under 100 ms to 40 seconds and it is still climbing. Sessions that have just written are pinned to the primary. Decide, endpoint class by endpoint class, whether to serve stale, fail, or route to the primary, and justify each choice with the load it adds to the primary. Then state what you would have built beforehand.
Approach
- Establish blast radius before cause, because mitigation and diagnosis have different deadlines. The decisive arithmetic is what happens if the database reads move to the primary: 2.1k reads/second on top of 1.2k writes/second roughly triples its operation count, on the node already absorbing the backfill that caused this. Reads and writes are not equal in cost, so treat that as an argument against a blanket move rather than as a capacity model - but it is enough to rule out routing everything to the primary.
- Classify endpoints by what staleness costs, not by how important they feel. Reads whose staleness is invisible - listings, search, counters - stay on the replica and return the watermark so the client can tell. Reads that immediately follow that same session's write keep their primary pin, which is a small bounded slice of traffic rather than the whole 2.1k/second. Reads that feed a decision with a side effect - authorisation, quota, the read half of a read-modify-write - must not be stale at all, because a 40-second-old permission row is the stale-permission failure wearing a different costume; those go to the primary or fail.
- Shed instead of queueing. If the must-be-fresh class alone exceeds the primary's headroom, refuse its lowest-value slice with 503 and a retry-after. A request queued behind a saturated primary holds a connection for a client that has already given up, and the retry storm that follows is what turns degradation into an outage. Bound the connection pool per role so the read fallback cannot consume the write path's connections - that bulkhead is the single decision that determines whether writes survive the next ten minutes.
- Attack the cause in parallel, since it is the one thing that can be stopped. The backfill is the load generator. A backfill that reads replication lag as its throttle signal and pauses above a threshold would have made this a non-event, with batch sizes small enough that each batch's write volume is a fraction of what a replica can apply per second. That is most of the answer to what should have existed beforehand.
Follow-up
- Lag returns to normal in nine minutes. Which mitigation do you remove first, and which one stays permanently?
- A user reports their change did not save, and the write committed. Trace the path that produces that report and name the signal that would have shown it before the report arrived.
One customer endpoint stalls deliveries to every other destination
The egress service delivers about 1.5k webhooks/second across 40,000 destinations, with a per-destination concurrency cap of 4 and a 10-second connect-plus-read timeout. Throughput falls to 300/second, queue depth climbs, and p99 delivery latency for unaffected destinations goes from 200 ms to minutes, while the error rate barely moves. One tenant holds 900 destination rows whose URLs share a hostname that now answers in 9.5 seconds. Explain the mechanism with the arithmetic, then give the containment in the order you would apply it.
Approach
- Look at saturation before errors. A flat error rate with collapsing throughput says nothing is failing, things are waiting, so the first signal to pull is in-flight request count or pool wait time rather than the error counter. This is the distinction that decides the whole investigation.
- Group in-flight work by resolved host, not by destination id. The cap is keyed per destination row, so 900 rows sharing one hostname buy 3,600 concurrent slots against a single host, each held for 9.5 seconds. The bulkhead was never a bulkhead for that host, and grouping by the wrong dimension is why the dashboard looked healthy.
- Do the arithmetic in both directions. Required concurrency is arrival rate times latency, so 1.5k/second at 200 ms needs about 300 in flight, which is entirely consumed by 3,600 slow slots; conversely whatever concurrency is left sustains rate equals concurrency divided by 9.5 seconds, which is the 300/second you are seeing. Matching both numbers is what promotes this from a plausible story to the mechanism.
- Explain why the circuit breaker never helped. It opens on consecutive failures, and a 9.5-second response inside a 10-second timeout is a success. Slow is not failing, so an error-rate breaker cannot see this; you need a slow-call ratio, a deadline propagated from the caller's remaining budget, or a concurrency limiter.
Follow-up
- The host recovers to 80 ms. How long does the queue take to drain, and what does the drain do to the recovered host?
- Where should the 10-second timeout number actually come from?
Built from the topics and questions Lorikeet candidates report; no round sequence has been reported.
Prepare, practise & reflect
One practical outcome each day. Spend longer where you need it.
0 / 7 done01Establish the Lorikeet format
- No round sequence has been reported, so ask your recruiter for the sequence, the duration of each stage and whether you will write code.
Deliverable: A written reply from your recruiter confirming the format.
02Work Feature Implementation
- Spend the session on Feature Implementation, which Lorikeet candidates report being tested on.
- Write one worked example in Feature Implementation and time yourself on it.
Deliverable: One timed worked example in Feature Implementation.
03Work Software Deliverables (Working Feature)
- Spend the session on Software Deliverables (Working Feature), which Lorikeet candidates report being tested on.
- Write one worked example in Software Deliverables (Working Feature) and time yourself on it.
Deliverable: One timed worked example in Software Deliverables (Working Feature).
04Work Interview Process (Video Phone Screen)
- Spend the session on Interview Process (Video Phone Screen), which Lorikeet candidates report being tested on.
- Write one worked example in Interview Process (Video Phone Screen) and time yourself on it.
Deliverable: One timed worked example in Interview Process (Video Phone Screen).
05Answer out loud: Technical Execution and Problem Solving
- Answer aloud, timed: How would you approach building this specific feature from scratch?
- Answer aloud, timed: Can you walk me through the trade-offs you made in your most recent project?
Deliverable: Spoken answers to 2 reported Technical Execution and Problem Solving question(s), under time.
06Rehearse your own examples
- Prepare three examples from your own work where you made the decision, each with the outcome you can quantify.
Deliverable: Three examples written out, each with a number attached.
07Dry run for Lorikeet
- Run one full mock under time, then write down the two questions you most want to ask your interviewers.
Deliverable: A completed timed mock and two questions to ask.
Expand any day for tasks and deliverables. Your progress is saved on this device.
Behavioural rounds judge the decision you made and what it cost.
Describe a time you had to debug a complex issue in a production environment.
Describe a time you had to debug a complex issue in a production environment.
Approach
- Pick a story where you made the decision, not one where you watched it.
- State the situation in two sentences and spend the rest on the reasoning.
- Give the blast radius: what could have broken, and what you measured.
- Name the disagreement and how you resolved it with evidence.
Follow-up
- What would you do differently if you ran that again?
- How did you know your change caused the improvement?
Narrate an outage you owned from page to postmortem
Pick an incident you personally drove, ideally one where writes were affected rather than reads. In six to eight minutes: state the symptom as it first appeared on a dashboard, the blast radius you established before you knew the cause, the mitigation you applied and when, the mechanism you eventually proved, and the follow-up that would prevent a repeat. Bring numbers: error rate, tenants affected, minutes to mitigate, minutes to resolve. If you cannot name what you measured, choose a different incident.
Approach
- Open on the signal rather than the cause: which metric at which percentile moved, on which service, at what time, so the listener follows the same evidence you had rather than a conclusion you already reached.
- Separate mitigation from diagnosis out loud. State what you did to stop the bleeding (flag off, shed traffic, drain a lease, roll back a deploy) and say plainly that you did it before the mechanism was known, because those are two jobs with different deadlines.
- Establish blast radius in countable terms: how many tenants, how many writes, and crucially whether the effect was loss or only delay. An append-only revision table or a pending outbox row means the change survived and the projection was merely behind, which is a repair rather than a data-loss incident.
- Prove the mechanism instead of asserting it. Name the trace span that grew, the plan that flipped to a sequential scan, the lease that expired, plus one alternative you ruled out and the signal that stayed flat while you ruled it out.
Follow-up
- What would you do differently in the first five minutes, given the same dashboard and no more information?
- Which follow-up action did you deliberately not take, and why was dropping it the right call?
Estimate work you have never done and defend the range
You are asked to estimate a change you have never attempted: add a column to a 100-million-row table, populate it, move reads across, and drop the old shape. Give a range with the assumptions that generate it, including batch size, the signal your backfill throttles on, and wall-clock hours, and name the three unknowns that would move the number most. Then describe a real estimate you gave under comparable ignorance: how you expressed its uncertainty, what you committed to, and how wrong you turned out to be.
Approach
- Decompose into independently deployable steps before estimating anything: add the column nullable, write both shapes, backfill in batches, verify, move reads, stop writing the old shape, drop it. That is four deploys spread over days, and the calendar estimate is dominated by them rather than by the loop's runtime.
- Do the arithmetic aloud for the part that has arithmetic in it: batch size times number of batches times per-batch duration, at a write rate the primary can absorb alongside roughly 1.2k writes per second of production traffic. The loop is throttled by replication lag and lock waits, not by how fast it can issue statements.
- Price the schema step by its lock rather than its statement duration. In PostgreSQL an ALTER TABLE taking ACCESS EXCLUSIVE waits for every open transaction on that table while later queries queue behind it, so a millisecond change issued during a thirty-second analytics query stalls that table for thirty seconds. Adding a nullable column with a non-volatile default avoids a rewrite from version 11; a new index wants CREATE INDEX CONCURRENTLY, which cannot run inside a transaction block and leaves an invalid index behind if it fails.
- Express the answer as a range whose endpoints each trace to a stated assumption, then name the cheapest experiment that collapses it, which is almost always running one real batch against the real table and multiplying.
Follow-up
- How do you verify the backfill genuinely finished, given rows written by production traffic while it ran?
- Where does the backfill resume from after a worker is killed mid-batch, and what makes that resume point trustworthy?
- 01
Describe a time you had to debug a complex issue in a production environment.
- 02
Pick an incident you personally drove, ideally one where writes were affected rather than reads. In six to eight minutes: state the symptom as it first appeared on a dashboard, the blast radius you established before you knew the cause, the mitigation you applied and when, the mechanism you eventually proved, and the follow-up that would prevent a repeat. Bring numbers: error rate, tenants affected, minutes to mitigate, minutes to resolve. If you cannot name what you measured, choose a different incident.
- 03
You are asked to estimate a change you have never attempted: add a column to a 100-million-row table, populate it, move reads across, and drop the old shape. Give a range with the assumptions that generate it, including batch size, the signal your backfill throttles on, and wall-clock hours, and name the three unknowns that would move the number most. Then describe a real estimate you gave under comparable ignorance: how you expressed its uncertainty, what you committed to, and how wrong you turned out to be.
How long does the interview process typically take?
The process is designed to be efficient, often moving from the initial screen to a final decision within a few weeks, depending on your availability for the work trial.
Lorikeet Software Engineer candidate reports ↗What is the most important thing to focus on for the work trial?
Focus on clear communication and incremental progress. It is better to deliver a well-documented, working piece of the feature than an unpolished, "complete" feature that breaks under pressure.
Lorikeet Software Engineer candidate reports ↗What is the culture like at Lorikeet?
It is a fast-paced, founder-led environment that values direct communication, high output, and a product-first mindset. If you enjoy taking ownership and seeing the direct impact of your work, you will likely thrive here.
Lorikeet Software Engineer candidate reports ↗What topics does Lorikeet test in interviews?
Lorikeet interviews most often cover Feature Implementation, Software Deliverables (Working Feature), Interview Process (Video Phone Screen), On-site/Office Work Trial, and Task Execution & Delivery. The exact emphasis depends on the specific role you apply for.
Lorikeet Software Engineer candidate reports ↗Sources & methodology 3 sources ↗
No official company page is cited. Rounds and questions come from candidate reports and PracHub editorial material; each source shows the date it was read.
- 01Lorikeet Software Engineer candidate reports ↗
Company-reported rounds, questions and FAQ.
Candidate reports · Accessed 2026-09-22 - 02PracHub Software Engineer practice ↗
PracHub practice material, not company-reported.
PracHub page · Accessed 2026-09-22 - 03PracHub preparation framework ↗
PracHub preparation guidance.
PracHub page · Accessed 2026-09-22
Explore related engineering environments and compare the preparation focus.
Cognition Software Engineer Interview Guide
What Cognition asks Software Engineer candidates, from reported rounds and questions.
Vercel Software Engineer Interview Guide
Debugging practice for Vercel software engineer prep built on a reproduction you trust, narrowing to the smallest failing input, and changing one variable per run so the result stays attributable.
Together Ai Software Engineer Interview Guide
Failure-handling practice for Together Ai software engineer candidates: requests whose outcome a timeout leaves unknown, where a retry is safe, and deduplicating at the receiver instead of assuming exactly-once delivery.
Spotify Software Engineer Interview Guide
Timed practice for Spotify software engineer candidates who lose time to the clock: short problems taken end to end, then reviewed against a written rubric rather than a passing test run.