Los Alamos National Laboratory · Software Engineer
Updated · 2026-09-24

Los Alamos National Laboratory Software Engineer
Interview Questions & Guide 2026

THE 60-SECOND BRIEF

As a Software Engineer at Los Alamos National Laboratory (LANL), you play a critical role in developing and maintaining systems that directly support national security, scientific discovery, complex physical modeling, and high-consequence R&D projects. Unlike traditional commercial software roles where rapid iteration and immediate product deployment drive the workflow, engineering at Los Alamos National Laboratory demands an uncompromising commitment to precision, safety, reliability, and security.

Treat capacity estimation as a conversion skill rather than a table to memorise: turn a user count and an action rate into requests per second and bytes per day, then name the component that number breaks first. The figure only matters if it changes the design.

Los Alamos National Laboratory candidates report 2 rounds · ≈ 2-4 weeks. The stages below are what candidates describe, not a published process.

Build at-least-once pipelines with explicit deduplication horizonsKeep money in integer minor unitsBound blast radius with per-tenant concurrency limits

44 min read

Browse Software Engineer questions

See the practice prompts

11Practice promptsAcross five skill areas
3With worked solutionsIncluded in the practice prompts

As a Software Engineer at Los Alamos National Laboratory (LANL), you play a critical role in developing and maintaining systems that directly support national security, scientific discovery, complex physical modeling, and high-consequence R&D projects. Unlike traditional commercial software roles where rapid iteration and immediate product deployment drive the workflow, engineering at Los Alamos National Laboratory demands an uncompromising commitment to precision, safety, reliability, and security.

Your day-to-day software development will directly impact multidisciplinary initiatives ranging from nuclear facility monitoring, digital engineering pipelines, and accelerator diagnostics to flight test systems and advanced scientific computing. You will write clean, well-tested code that interfaces with physical hardware, processes real-time sensor data, or automates complex lab workflows. Success in this position requires balancing modern software engineering principles with rigorous compliance and regulatory overhead.

Because solves problems that have no off-the-shelf solution, you will frequently tackle legacy platform integration alongside bleeding-edge digital tools. The role requires strong technical execution, transparent communication across multi-person evaluation panels, and a high degree of adaptability when navigating structured institutional processes.

01

Phone Screening

reported

Half of this call is the part candidates treat as small talk: start date, notice period, work authorisation and its timing, location and time zone, on-call, and the number. Those are what kill offers late, after several engineers have each spent a day. Surfacing a hard constraint now costs you nothing and occasionally buys you something, since a loop compressed to fit a competing deadline can usually only be arranged if it is asked for early. The common failure is deflecting the compensation question twice, then discovering at offer stage that the band never reached your number.

What to demonstrate

  • Whether your hard constraints are compatible with the role before a loop gets booked: earliest start, notice period, what authorisation you hold and when it needs action, days on site, willingness to carry a pager
  • Whether you give a compensation range with something behind it, such as current total compensation or a competing timeline, rather than leaving the band untested
  • Whether your stated timeline is real, since a competing deadline raised now is something scheduling can sometimes work around and the same deadline raised at offer stage usually is not

How to prepare

  • Write each constraint down in one line before the call and state them as facts rather than negotiating them live under a question you were not expecting
  • Set your range from two or three current data points for that level and location, and name the structure you are quoting in, so the number is comparable to the one they are holding
  • If another process is running, say where it stands and by when, and ask directly whether this loop can be scheduled inside that window
PracHub interview research ↗
02

On-Site Interview

reported

A day like this is several different games in a row, and the expensive mistake is carrying the previous one into the next room. Coding rewards narrow precision and finishing inside a timer. Design rewards breadth, stated assumptions and naming what you are deliberately not building. Behavioural rewards specificity about people and decisions. Candidates who over-engineer a coding problem they were supposed to finish, or who start sketching class hierarchies before anyone has agreed what the system has to do, are usually still playing the last round. Between rooms, name out loud which game the next one is.

What to demonstrate

  • Whether the coding round ends with something that runs and has been traced against a degenerate input, rather than an extensible design that was never finished
  • Whether a design discussion opens by agreeing on traffic shape, read-to-write ratio and what is allowed to be stale, instead of proceeding from an architecture you arrived with
  • Whether a behavioural answer names a person, a disagreement and what you did about it, rather than describing the system the story happened inside
  • Whether the opening habits still appear late in the day: restating the problem, asking for constraints, saying the plan before typing

How to prepare

  • Book three mocks of different types back to back on one afternoon and ask each interviewer afterwards which round you answered in the wrong mode
  • Write a three-line opening script per round type — coding: restate, name the approach and its cost, then type; design: ask for scale, read-write mix and what must not break; behavioural: name the person, the stakes and the decision — and run it off a card so the switch is mechanical rather than remembered
  • Practise coding with a timer you do not extend, stopping when it stops, so the trained reflex is to finish a correct solution rather than to keep improving one
PracHub interview research ↗

PracHub editorial advice for the preparation topics above.

01

Paginating a growing table with limit and offset

Two unrelated defects share the idiom. Correctness: rows inserted or deleted between page requests shift the window, so a consumer walking an export skips rows and sees others twice, which for a customer-facing sync is silent data loss rather than an error anyone notices. Cost: the database still produces and discards the skipped rows, so page N costs time proportional to N times the page size and a deep page on a large table degrades from milliseconds to seconds. Keyset pagination over a stable, unique, indexed ordering -- where (created_at, id) < ($1, $2) order by created_at desc, id desc limit $3 -- is constant-cost per page and immune to shifting, on the precondition that the cursor columns never change value for a row, which disqualifies updated_at as a cursor.

02

One shared connection pool for every tenant and every query class

A single tenant with a large table and a missing index can occupy every connection with slow queries, and every other tenant then waits in connection acquisition -- a queue invisible in database metrics, because the database itself looks healthy while the application starves. Containment is bulkheads: separate pools or per-tenant concurrency caps for interactive requests, background jobs and exports, a statement timeout low enough that a pathological query dies before it accumulates, and an idle-in-transaction timeout so a stuck client cannot pin a connection and its locks indefinitely. One caveat worth knowing in advance: if a transaction-pooling proxy sits in front of the database, session-scoped behaviour changes, so session-level advisory locks and settings applied outside a transaction do not survive the way they do on a direct connection.

03

Comparing floating-point values for equality, or holding money in them

Binary floating point cannot represent 0.1 exactly, so repeated addition drifts and an equality check fails on values that are mathematically equal. Store currency as integer minor units or a decimal type, and compare floats against a tolerance you chose for a stated reason.

04

Assuming the bug is in the framework

Suspect your own code first: read the stack trace top to bottom, check which versions are actually installed rather than which ones you believe are, and reproduce in isolation before blaming a library that thousands of people run daily. When the fault really is upstream, you need that minimal reproduction to say so credibly anyway.

Choose a category, try a prompt, then open its approach, worked solution or follow-up when you need it.

8 technical prompts3 include a worked solution

Order a job dependency graph and find its critical path

mediumWorked solution
topological-sortdag-longest-pathcycle-detectioncritical-path

A workspace defines up to 50,000 jobs with up to 200,000 dependency edges and an estimated duration_seconds per job. Given the edge list, reject the graph if it contains a cycle and name one cycle's nodes; otherwise return a valid execution order, the earliest possible completion time with unlimited workers, and the set of jobs whose slack is zero. Then say which single job to shorten in order to cut the completion time, and by exactly how much. State the complexity of each part.

Approach
  1. Kahn's algorithm for the order: compute indegrees, seed a queue with zero-indegree nodes, emit and decrement. O(V + E), which at 50,000 and 200,000 is milliseconds. If fewer than V nodes are emitted, the graph contains a cycle.
  2. Kahn detects a cycle but cannot name one. The nodes left with indegree above zero contain every cycle, so run one DFS restricted to that residual subgraph with three-colour marking and report the stack slice from the grey node the back edge points at. That is the difference between a usable error message and 'dependency cycle detected'.
  3. Earliest completion with unlimited workers is the longest path, which is NP-hard on a general graph and linear on a DAG. State the precondition, then relax in topological order: earliest_finish[v] = duration[v] + max(earliest_finish[u] for u in preds(v)), taking the max over an empty predecessor set as zero. The makespan T is the maximum over all nodes. O(V + E).
  4. Second pass in reverse topological order for latest_finish, then slack[v] = latest_finish[v] - earliest_finish[v]. Zero-slack nodes form the critical path, and there can be several disjoint critical paths, so return the set rather than one chain. slack[v] = 0 is exactly the statement that some longest path runs through v; equivalently, the longest path through v has length T - slack[v].
  5. The speed-up bound is the point of the question, and the obvious form of it is wrong. Shortening a zero-slack job v by d, with 0 <= d <= duration[v], cuts the makespan by min(d, T - L_avoid(v)), where L_avoid(v) is the longest path in the graph with v deleted: the longest path that avoids v, not the second-longest path overall. The two coincide only when the runner-up path misses v. Counterexample: A of 10 s feeds both B of 5 s and C of 4 s, so T = 15 s and the second-longest path is 14 s, yet shortening A by 10 s leaves a makespan of 5 s. The realised gain is the full 10 s, because both paths ran through A and shrank together, while min(10, 15 - 14) predicts 1 s. The reason is structural: shortening v reduces every path through v by d and leaves every other path alone, so the new makespan is max(T - d, L_avoid(v)).
  6. Compute L_avoid(v) the direct way: delete v and re-run the same forward relaxation, O(V + E) per candidate. The cheaper equivalent skips the deletion, since L_avoid(v) only ever matters through that max: set duration[v] := 0, recompute the makespan as T0(v) = max(T - duration[v], L_avoid(v)), and the gain is min(d, T - T0(v)), which is identical for every d <= duration[v]. Only zero-slack jobs are candidates, because shortening a job with positive slack changes the completion time not at all. One relaxation is milliseconds at this size, so ranking a critical set in the hundreds costs O(k(V + E)) and is worth doing exactly; a critical set in the tens of thousands is not, and there you evaluate a shortlist, longest jobs first, and say that the answer is the best of that shortlist rather than the optimum.
Worked solution 30 min
  1. Build four fixtures. A: 12 jobs, two branches of 100 s and 95 s that share no job. B: fixture A plus one back edge. C: two disjoint paths tied at 100 s. D: the shared-prefix case, one job of 10 s feeding a 5 s job and a 4 s job, so the longest path is 15 s and the runner-up is 14 s.
  2. Run Kahn; on fixture B confirm it emits fewer than V nodes, then run the residual-subgraph DFS and print the actual cycle.
  3. Compute earliest_finish forward and latest_finish backward, and list the zero-slack set for each fixture.
  4. For each zero-slack job v, recompute the makespan with duration[v] := 0 to get T0(v), and record both the correct bound T - T0(v) and the wrong one, T - second_longest_path, side by side.
  5. Apply the shortening for real (20 s off the critical branch of A, 10 s off the shared prefix of D) and diff the recomputed makespan against each prediction.
EXPECTED RESULTFixture A: makespan 100 s, and shortening by 20 s leaves 95 s, a gain of 5 s. Both formulas agree here, because the 95 s branch avoids the shortened job. Fixture D: makespan 15 s, and shortening by 10 s leaves 5 s, a gain of the full 10 s, which `T - T0(v) = 15 - 5 = 10` predicts and `T - second_longest = 1` does not. Fixture C: the zero-slack set covers both tied paths, and shortening a job on one of them alone gains nothing, since the other path still runs 100 s.
Follow-up
  • Only m workers are available. What happens to your answer, and what can you still promise about the schedule you produce?
  • Edges arrive incrementally as the customer edits the pipeline. How do you detect a cycle at insert time without re-running Kahn over 250,000 elements?
  • Durations are estimates. How would you express completion time as a distribution, and what breaks about the critical path once you do?

Hold a tenant to a trailing sixty-second request limit

medium
sliding-windowtwo-pointerrate-limitingtenant-skew

The gateway must hold each tenant to R requests in any trailing 60 seconds, in aggregate across three regions and every pod, within a budget of under 10 ms added p99. Peak is 30,000 requests/second across 200,000 active tenants, and traffic is heavily skewed toward a handful of them. Give an exact single-process algorithm with its amortised per-request cost and its memory per tenant, then a bounded-memory approximation and the worst-case overshoot it actually admits. Say what the distributed version does when the counter store is unreachable.

Approach
  1. Exact, single process: a per-tenant deque of request timestamps. On arrival, pop from the front while front <= now - 60s, then admit if the remaining length is below R and push. Each timestamp is pushed once and popped once, so the cost is O(1) amortised. The O(R) version is the one that re-filters the whole deque on every request.
  2. Quote the memory. R = 1,000 across 200,000 active tenants is up to 2 x 10^8 timestamps at 8 bytes, about 1.6 GB, and that is the worst case rather than the mean, because the long tail of small tenants holds almost nothing. Skew helps you here and hurts you in the sharding decision.
  3. Bounded alternative, with its real bound stated: a fixed 60-second counter is O(1) memory but admits close to 2R across a 60-second span straddling a boundary. The weighted two-bucket estimate, prev * (60 - elapsed)/60 + cur, is better on smooth traffic but assumes the previous window's arrivals were uniform; an adversary packing them at the end of that window is undercounted and can still approach 2R. Say that rather than calling it exact.
  4. Token bucket is the usual gateway answer and a different contract: O(1) state per tenant (tokens, last_refill), a sustained rate, and a deliberate burst allowance equal to the bucket size. Choose it when a burst is acceptable and the log when the limit is contractual.
  5. Distributed: the limit is per tenant in aggregate, so a local bucket of R/N per pod is wrong in both directions under skew. A tenant landing on one pod is throttled at R/N, and a tenant spread evenly across pods exceeds R. The shared check must be a single atomic round trip, one script or one increment-and-compare, never read-then-write, and it must fit inside the 10 ms p99 budget.
  6. Decide the unavailable case in advance and write it down. Failing open keeps the product up and lets a tenant exceed its limit for the duration; failing closed converts a counter-store outage into a full outage. Most gateways fail open on rate limits and closed on authorisation, and those are two separate decisions made separately.
Follow-up
  • One tenant sends 40% of all traffic. What does that do to a single counter key, and what do you shard on instead?
  • Quotas rather than rate limits: the check is select used; if used < limit then insert. Name the isolation level that still permits the overshoot, and the two fixes.
  • How do you return an accurate Retry-After from the exact algorithm without a second scan?

Parse and verify a timestamped multi-signature webhook header

easy
parsinghmacconstant-time-comparereplay-protection

An inbound webhook carries a signature header of at most 1 KiB shaped t=<unix seconds>,v1=<64 hex chars>, with up to five v1 values during secret rotation and possibly unknown scheme keys. You hold the raw request body bytes and the currently active signing secrets. Write the parser and the verifier: accept when any active secret reproduces a signature and the timestamp is within a five-minute tolerance in either direction, reject otherwise. Single left-to-right pass over the header, no regular expression. State what is inside the MAC and why.

Approach
  1. Parse in one scan: split on ,, then on the first = only, since a value may itself contain = under a future scheme. Accept t exactly once and treat a second t as a reject rather than last-wins. Push every v1 onto a short list and ignore any other key, so a v2 can be introduced later without breaking this verifier.
  2. Say what is signed: HMAC-SHA256 over the exact byte string <t>.<raw body bytes>, yielding 32 bytes or 64 hex characters. The timestamp sits inside the MAC because otherwise an attacker replays yesterday's body with its still-valid signature and only has to edit the header timestamp.
  3. Hash the bytes as received. Verifying against a re-serialised JSON body is the usual defect: key order, whitespace and number formatting all change the bytes while the parsed objects compare equal, so signatures fail for honest senders and the popular 'fix' is to stop checking.
  4. Compare in constant time over fixed-length digests. Decode the hex to 32 bytes, accumulate acc |= a[i] ^ b[i] across the whole length, and test acc == 0 at the end. Evaluate every candidate without an early exit; at five candidates that is five HMACs over the body, linear in body size and negligible beside the network.
  5. Apply the tolerance as a two-sided bound, rejecting when |now - t| > 300 seconds. A sender whose clock runs ahead of yours is an ordinary case, and an unbounded future timestamp is a free replay window.
  6. Complexity: O(L) over the header producing k candidates, plus k HMACs at O(|body|) each. Space is O(k) beyond the body itself. Do the cheap rejections, including the tolerance check, before any cryptography runs.
Follow-up
  • The body is 40 MB. What changes about where you verify, and what can you do before the whole body has arrived?
  • A customer reports that signatures fail for exactly the requests whose body contains a non-ASCII character. What is your first hypothesis?
  • How do you rotate the signing secret with no failed deliveries, and how long do both secrets stay live?

For someone who has spent the last few years shipping features and reading other people's code, and who has not solved a timed problem from a blank file in a long time. Five days rebuild the primitives and the patterns that sit on them, working from invariants rather than remembered solutions, and the last two attach that back to the rest of the loop.

Small steps. Visible outcomes.0 / 7 completed
ONE WEEK · YOUR PACE

Prepare, practise & reflect

One practical outcome each day. Spend longer where you need it.

0 / 7 done
01Rebuild the primitives by implementing them
  • Implement a dynamic array with doubling growth and an operation counter, then change the growth rule to add a fixed sixteen slots instead, and time both for n of ten thousand, a hundred thousand and a million. The fixed-increment version resizes n/16 times at O(n) each, so its total work is quadratic; doubling is what makes append amortised constant.
  • Implement a hash map with separate chaining and a load-factor resize, then insert ten thousand keys engineered to land in one bucket and record what happens to lookup time, so that average-case O(1) becomes a claim with a stated precondition rather than a reflex.
  • For dynamic-array append and hash-map insert, write down which cost is amortised rather than worst-case, which single operation pays the whole bill, and what a system with a hard per-operation deadline would have to do instead.

Deliverable: Two working implementations plus a timing table showing the input at which each structure's advertised complexity stops holding.

Practice prompt ↗Practice prompt ↗Worked solution ↗
02Arrays under an invariant: two pointers, sliding window, binary search
  • Solve longest-subarray-with-sum-at-most-K using a sliding window, then run it on an input containing negative numbers and watch it return the wrong answer: extending the window only moves the sum monotonically when every element is non-negative, and that precondition is the whole reason the technique works.
  • Write the binary search that finds the first index satisfying a predicate rather than an exact value, put the loop invariant above the loop in a comment, and verify termination on the two inputs that break careless versions: the empty range, and a range where every element satisfies the predicate.
  • Compute the midpoint as lo + (hi - lo) / 2 and write one line on why the obvious (lo + hi) / 2 is a genuine defect in a fixed-width integer type and a non-issue in a language with arbitrary-precision integers.

Deliverable: Three solved problems, each with its invariant written above the loop, plus one recorded input on which the sliding window is provably wrong.

Practice prompt ↗Practice prompt ↗
03Sorting, heaps, and the greedy argument that has to be proved
  • Solve one top-k problem three ways, by full sort, by a size-k heap, and by quickselect, then write the values of n and k at which each becomes the right choice, along with quickselect's quadratic worst case and why a randomised pivot makes that unlikely rather than impossible.
  • Implement bottom-up heapify and count sift-down steps to confirm it does linear work rather than n log n, because most nodes sit near the bottom of the tree and therefore move only a short distance.
  • Take interval scheduling by earliest finishing time and write the exchange argument out in full: given any optimal schedule, swapping in the earliest-finishing interval keeps it feasible and no smaller. Then construct the weighted variant where that same greedy fails and name what has to replace it.

Deliverable: A three-way top-k comparison with measured crossover points, one written exchange argument, and one counterexample to a greedy rule that looks almost identical.

Practice prompt ↗Practice prompt ↗
04Recursion, memoisation, and the step to a table
  • Take one problem with overlapping subproblems, such as edit distance or coin change, instrument the plain recursion with a call counter to show the blow-up, then add memoisation and re-count.
  • Convert the memoised version to a bottom-up table and state the two properties you relied on: each subproblem's result depends only on its arguments, and the dependencies form a DAG you can enumerate in order.
  • Rewrite one deep recursion with an explicit stack, then find the input length at which the original hits the interpreter's frame limit, which defaults to about a thousand frames in CPython, so you know when the rewrite is required rather than decorative.

Deliverable: One problem in three forms, naive, memoised and tabulated, with call counts for each and the input length at which recursion depth becomes the binding constraint.

Practice prompt ↗Practice prompt ↗Worked solution ↗
05Graphs, where most of the work is choosing the traversal
  • Implement BFS and DFS over one adjacency list, then answer for each which finds a shortest path in an unweighted graph and which you would use to detect a cycle in a directed graph, including why the in-progress versus finished distinction matters for the second.
  • Implement topological sort by in-degree, feed it a graph containing a cycle, and confirm the failure signature is that fewer than V nodes come out rather than an exception, then note that the order it produces is one of several valid ones.
  • Run a shortest-path search on a graph with a single negative edge weight and show the wrong answer, then write the precondition Dijkstra actually needs, non-negative weights, because it finalises a node's distance the first time that node is popped, and name the algorithm you would switch to and its own limit.

Deliverable: A small graph library with BFS, DFS and topological sort, plus two inputs that produce documented wrong answers under the wrong algorithm choice.

Practice prompt ↗
06One day for everything that is not an algorithm
  • Sketch one system only to the depth a coding-heavy loop tends to reach: the endpoints, what the service stores, and the single query pattern that decides the schema. Stop at twenty-five minutes.
  • Prepare the project answer for an interviewer who codes, which means rehearsing the two levels they push to: the specific thing you built, and why you chose that approach over the alternative they will name. Open with a number and be ready to say what it excludes.
  • Prepare the answer to what you would do differently, choosing a real technical mistake with a specific fix rather than a complaint about process or staffing.

Deliverable: One design sketch at endpoint-and-schema depth, plus a project answer rehearsed to two levels of follow-up.

Practice prompt ↗
07Solve out loud, under time
  • Do three timed problems at twenty-five minutes each in a plain editor with no autocomplete and no execution until the end, then tally separately the failures that were syntax and the ones that were approach, because those two numbers call for different fixes.
  • Narrate one solution from the first sentence, stating the approach and its complexity before writing any code, and rehearse the sentence you will use when you realise mid-solution that the approach is wrong.
  • Re-solve from blank the two problems you were slowest on this week and compare the times against the day they first appeared.

Deliverable: A recording of one fully narrated solution and a tally that separates syntax failures from approach failures.

Practice prompt ↗Worked solution ↗

Expand any day for tasks and deliverables. Your progress is saved on this device.

Bring the two or three numbers the story rests on and know how they were collected. A p99 whose timer starts inside your handler excludes the time a request spent queued, so it can sit flat while users wait longer. Give the window, the percentile and what the measurement left out, or drop the number.

Resolve a review disagreement over a quota check

easy
code reviewisolation levelswrite skewdisagreement

A colleague's pull request enforces a per-tenant quota by selecting the current count and then inserting when it is under the limit. You flag it as a race. They reply that the transaction already runs at repeatable read, so the snapshot makes it safe, and the tests pass. Walk through taking that disagreement to a resolution: what you write in the review, what you demonstrate rather than assert, which fix you propose and why, and what you do if they still disagree after all of it.

Approach
  1. Answer the claim precisely instead of restating your objection, because they have made a specific technical argument. In PostgreSQL, repeatable read is snapshot isolation; this is write skew, which snapshot isolation permits by design. Both transactions read a count that is stable within their own snapshot, insert disjoint rows that the other cannot see, and both commit, so the limit is exceeded by exactly the concurrency.
  2. Demonstrate rather than cite. Two psql sessions, both BEGIN ISOLATION LEVEL REPEATABLE READ, both select the count, both insert, both commit: it succeeds. Repeat at SERIALIZABLE and the second commit fails with serialization_failure, SQLSTATE 40001. That takes two minutes, ends the argument without anyone conceding a position, and leaves an artefact for the next reviewer.
  3. Offer the options with their costs rather than a verdict. Serialisable plus a retry loop on 40001 is correct but obliges every caller to retry and degrades under contention. An increment-and-compare on a counter row — update tenant_quota set used = used + 1 where tenant_id = $1 and used < limit returning used — is safe even at read committed, because a blocked updater re-evaluates the WHERE clause against the row version it finally locks, and zero rows returned means full. A unique or exclusion constraint that makes the surplus write fail is the third.
  4. Name the plausible non-fix explicitly, since it is what usually gets merged instead: folding the count into the insert as insert ... select ... where (select count(*) ...) < limit is still racy under read committed, because the subquery cannot see the other transaction's uncommitted rows. It looks atomic and is not.
  5. Say what you do if they still disagree: escalate the decision rather than the disagreement. Attach the reproduction, hand it to the service owner or a third reviewer, and state that you will not block the merge if the owner accepts the risk knowingly — and that you want that acceptance written down.
  6. Close with the general lesson worth leaving in the review thread: a passing suite is weak evidence for a concurrency claim because it runs one request at a time. Ask for a test that runs two.
Follow-up
  • Write the counter-row version. Does your answer change if the quota counts child rows rather than a column?
  • Under serialisable, who performs the retry, and what does the API client see if the retry also fails?
  • This is the third disagreement with the same reviewer this month. What changes in how you review?

Disclose a cross-tenant webhook delivery to affected customers

medium
cross-tenant leakdisclosureblast radiusauthorisation checks

An enqueue path took the subscription from one lookup and the payload from another. For nineteen minutes, webhook_delivery rows were created whose tenant_id did not match the subscription's tenant, and eleven payloads were signed and sent to four endpoints belonging to other customers. You hold payload_digest, delivery timestamps and response codes. Describe how you handle a disclosure of this kind: what the records prove, what they cannot prove, what you say before you know everything, the one code change that closes it, and which parts you personally drove.

Approach
  1. Bound the population before saying anything externally. The affected set is deliveries in the window where the event's tenant and the subscription's tenant differ; the ones that actually left are those with delivered_at set and a 2xx in last_response_code. Attempted and delivered are two different counts and a disclosure has to use the right one in the right sentence.
  2. Separate what the records prove from what they do not, and say both halves rather than the flattering one. They prove which payloads were signed, where they went, and — through payload_digest — exactly which bytes. They do not prove what the receiving system did with them, and they do not bound the window more precisely than your deploy timestamps do.
  3. Communicate on the facts you hold, with the scope stated as an upper bound: 'at most eleven payloads, four recipient endpoints, these fields, this window' is more useful and more honest than waiting a day for certainty. The field list matters more than the event count, because a customer cannot assess exposure from 'an event'.
  4. Name the code change precisely, because this class never originates in the delivery worker. Compare the event's tenant against the subscription's tenant at enqueue and again immediately before the payload is signed, and make the second comparison drop the delivery rather than log a warning. Say why one check is insufficient: the enqueue check protects against the bug you know about, the pre-signing check protects the boundary itself.
  5. Run the history question in parallel and say so: a query over historical deliveries for the same mismatch tells you whether this was nineteen minutes or a year, and you would rather find the second case yourself than have a customer find it after your disclosure.
  6. Split the response into workstreams with owners — recipients asked to delete, affected customers notified, the check landed with a test, history swept — and say which you personally drove and which you handed off. Claiming all four is not credible and claiming none is not ownership.
Follow-up
  • The historical sweep finds two more instances from last year. What changes in what you have already told people?
  • Who approves the wording, and what do you do when you are asked to soften the scope?
  • A customer asks you to prove a redelivery contained the same bytes as the original. What do you show them?

Own the incident where invoices undercounted metered usage

medium
incident responseat-least-oncebilling correctionpostmortem

A metering consumer acknowledged each batch before committing the fold into usage_rollup_hourly. A rolling deploy restarted consumers mid-batch for two hours; roughly 1.4M usage_event rows were acknowledged and never folded, and 61 invoices sealed against the resulting rollups before anyone noticed. Take the owner's role. Describe an incident of comparable blast radius you owned: how it surfaced, the query that sized the loss, what you stopped first, and how the money was corrected. Give a wall-clock timeline and one thing you got wrong while it was still live.

Approach
  1. Open with the invariant that broke and the direction of the error, because they determine everything else: acknowledging before committing makes the consumer at-most-once, so this loses events rather than duplicating them, and loss raises no error anywhere. A listener who hears 'we lost revenue silently' knows immediately why detection took two hours.
  2. Size it with a stated reconciliation rather than an adjective: sum(quantity) from usage_event grouped by (tenant_id, sku, hour of occurred_at) over the window, against usage_rollup_hourly.quantity_sum on the same keys, filtered to environment='production' because staging and sandbox are metered but not billed. Then bisect by hour and tenant until single cells explain the gap. Say how long that ran and whether a replica could serve it while the incident was live.
  3. Separate mitigation from fix and say which came first. Mitigation is holding the sealing job, because a sealed row is frozen by design and every minute of sealing converts a recoverable rollup into an invoice correction. The fix is moving the acknowledgement after the commit, which re-introduces duplicates that the dedup check on (tenant_id, idempotency_key) must now absorb.
  4. State the correction path in the domain's own terms: sealed periods are never edited, so each affected tenant gets an adjustment line on the next invoice with kind='adjustment' and voided_by_line_id pointing at the line it reverses, priced against the same rate tier and carrying the watermark it priced against. That is four separate numbers — tenants affected, minor units, the cycle the adjustment lands in, and when customers were told.
  5. Close on one prevention control with its cost, not five: a per-hour reconciliation comparing raw sum to rollup sum that pages above a threshold. Name the threshold and the false-page rate you accepted, because a detector nobody will keep staffed is not prevention.
  6. Name a mistake you made inside the response window — the wrong first hypothesis, a mitigation that made it worse — rather than a design mistake from six months earlier. That is the part candidates rehearse away and interviewers weight heavily.
Follow-up
  • Your fix moves the acknowledgement after the commit. What breaks now, and what absorbs it?
  • One undercharged tenant has since churned. Do you bill them, and who decides?
  • How would you have caught this in ten minutes instead of two hours, and what would that detector cost you in pages per week?
  • 01

    A colleague's pull request enforces a per-tenant quota by selecting the current count and then inserting when it is under the limit. You flag it as a race. They reply that the transaction already runs at repeatable read, so the snapshot makes it safe, and the tests pass. Walk through taking that disagreement to a resolution: what you write in the review, what you demonstrate rather than assert, which fix you propose and why, and what you do if they still disagree after all of it.

  • 02

    An enqueue path took the subscription from one lookup and the payload from another. For nineteen minutes, webhook_delivery rows were created whose tenant_id did not match the subscription's tenant, and eleven payloads were signed and sent to four endpoints belonging to other customers. You hold payload_digest, delivery timestamps and response codes. Describe how you handle a disclosure of this kind: what the records prove, what they cannot prove, what you say before you know everything, the one code change that closes it, and which parts you personally drove.

  • 03

    A metering consumer acknowledged each batch before committing the fold into usage_rollup_hourly. A rolling deploy restarted consumers mid-batch for two hours; roughly 1.4M usage_event rows were acknowledged and never folded, and 61 invoices sealed against the resulting rollups before anyone noticed. Take the owner's role. Describe an incident of comparable blast radius you owned: how it surfaced, the query that sized the loss, what you stopped first, and how the money was corrected. Give a wall-clock timeline and one thing you got wrong while it was still live.

PracHub interview preparation framework ↗
Is this an official Los Alamos National Laboratory interview guide?

No. It is PracHub's own research and practice material for the Software Engineer role at Los Alamos National Laboratory. Rounds and questions reflect what candidates have reported, not a process Los Alamos National Laboratory has published, and they change over time. Confirm the current format and scope with your recruiter.

PracHub interview research ↗
How long does the hiring process take from initial application to offer?

The hiring process at Los Alamos National Laboratory typically takes between four weeks and three months. Because hiring involves multi-person panels, reference verifications, and institutional approvals, timelines move more deliberately than in commercial tech companies.

PracHub interview research ↗
How formal is the technical presentation requirement?

Very formal. If requested, treat the presentation as a core component of your interview. Prepare professional slides, focus on your individual technical contributions, rehearse your timing strictly (10–20 minutes), and prepare to answer deep panel follow-up questions.

PracHub interview research ↗
What is the dynamic of the panel interview?

Panel interviews feature 3 to 10 team members and managers asking structured questions sequentially. Questions can come rapid-fire from different engineers evaluating specific areas on a checklist; remain calm, take a breath, and address the specific panel member who asked the question.

PracHub interview research ↗
Is relocation required for Software Engineer roles?

Yes, most Software Engineer positions are based on-site at the laboratory campus in Los Alamos, New Mexico, due to physical facility requirements and security clearance access. LANL typically provides comprehensive relocation support for qualified hires.

PracHub interview research ↗
Sources & methodology 3 sources ↗

No official company page is cited. Rounds and questions come from candidate reports and PracHub editorial material; each source shows the date it was read.