As a Data Scientist at Mavenir, you sit at the intersection of cutting-edge telecommunications infrastructure and advanced Artificial Intelligence. Your work is critical to evolving Mavenir’s software-defined networking solutions, where you will leverage Agentic AI, Deep Learning, and Reinforcement Learning to build intelligent, autonomous systems. You are not just analyzing data; you are architecting the logic that enables next-generation network automation and optimization.
This role demands a high degree of technical rigor and strategic thinking. You will be responsible for the full lifecycle of AI applications—from designing complex data extraction pipelines to deploying scalable models in production. Whether you are fine-tuning Large Language Models (LLMs) or optimizing classical machine learning workflows, your contributions directly impact how Mavenir delivers value to global telecommunications providers. You will work in a fast-paced environment that values innovation, requiring you to be both a self-starter and a collaborative partner to engineering and product teams.
Preliminary Assessment
reportedBefore anything else, this round is a reading test. You are given a small schema and a question phrased in business language, and most of the difficulty sits in the gap between them. Who counts as an active user, does a refunded order still count as an order, is that date column an event time or a load time. Weak answers start typing immediately and compute something precise about the wrong population. Strong ones pin the definition in one sentence, name the column that encodes it, then write the query. On a timed assessment with nobody to tell, write the definition in a comment anyway.
What to demonstrate
- Whether an ambiguous term becomes a specific column and filter before any computation happens
- Whether you read the schema for keys and cardinality rather than only for column names
- Whether the result answers the question at the grain it was asked at, per user or per session or per day
How to prepare
- Take three metrics you already use and write down the exact filter and exact grain behind each, then practise stating one of them in a single sentence out loud
- On a schema you have never seen, spend the first minute writing what one row of each table means and which key it is unique on, then predict which joins can duplicate rows
- Rehearse a version where the definition changes halfway through, and edit the query you have instead of starting over
Technical Deep-Dives
reportedA handful of shapes account for most of what gets asked in this format: a ranking or deduplication inside groups, a running or rolling total, a period-over-period comparison, and a cohort tracked forward over time. Recognising the shape quickly is most of the speed here; deriving it from scratch while a clock runs is where the time goes. Know that a window function keeps every row while a GROUP BY collapses them, and know which one the question needs. If the exercise is in Python instead of SQL, the same shapes arrive as groupby with transform, shift and merge, and the same grain mistakes are available.
What to demonstrate
- Whether you reach the right construct without a detour, such as ROW_NUMBER over a partition to deduplicate instead of a self-join against a MAX subquery
- Whether you know what your window frame actually is, since adding ORDER BY inside OVER changes the default frame and silently changes a running total
- Whether the thing runs. A near-miss that throws an error scores below a plainer query that returns the right rows.
How to prepare
- Write each of the four shapes once from memory against a small schema and keep the working version somewhere you will reread it: dedupe with ROW_NUMBER, a running total, a month-over-month change with LAG, and a retention table
- Compute one running total twice on data with tied timestamps, once on the default frame and once with ROWS BETWEEN UNBOUNDED PRECEDING AND CURRENT ROW, and look at where the two disagree
- If Python is on the table, rebuild the dedupe and the running total with groupby and cumsum, then assert the two implementations return identical rows
Final Rounds
reportedA loop is not scored one interview at a time. The people you meet compare notes afterwards, usually in a meeting you are not in, and the outcome turns on what each of them can say about you when asked. That rewards something other than survival: every room needs one specific thing worth repeating, and none of them can contradict another. The common way to lose is to tell the same project four times with different numbers in it, or to be uniformly fine in a way that leaves nobody with anything to argue for.
What to demonstrate
- Whether your account of a project survives being told twice, with the same scale, the same metric definition and the same numbers each time
- Whether each interviewer leaves with one concrete claim they could make on your behalf later, rather than an absence of complaints
- Whether a question you already answered in an earlier room gets the same answer at the same depth, without visible impatience
How to prepare
- Write a one-page fact sheet for your two or three main projects that fixes the numbers you will quote: rows of data, the metric as a single sentence, the effect you measured and how long the work took. Say them aloud from the sheet until they come out identical every time
- For each kind of room you expect, decide the one sentence you want that interviewer repeating in a debrief, then check during the mock that you said it outright instead of implying it
- Rehearse answering the same project question twice in one sitting, the second time as though you had not just answered it, because the thing that needs fixing is the flatness that creeps into a repeated story
PracHub editorial advice for the preparation topics above.
Counting on an identity key that changes underneath the metric
visitor_id is per browser and per device, and it resets on cookie clearance, private browsing and platform privacy changes, so the distinct-visitor count drifts upward for reasons unrelated to reach. Any rate with visitors in the denominator therefore decays over time even when behaviour is constant, and any rate with visitors in the numerator inflates. The stitching at signup makes it worse in both directions: a user who signed up on mobile and returns on desktop is two visitors and one user, while a shared device is one visitor and several users. Decide which key each metric is counted on, write it into the definition, and when comparing a period before and after a platform privacy change, expect a level shift in every visitor-keyed metric and do not attribute it to the product.
Reading a pooled rate that moved because the mix moved, not because any behaviour changed
A pooled conversion rate is a weighted average, and a shift in the weights can move it in the opposite direction to every one of its parts. A paid campaign that brings low-converting traffic drops overall signup conversion even if desktop, mobile web and app conversion each rose that week, which is Simpson's paradox and it is the single most common cause of an inexplicable dashboard move. The discipline is to decompose before explaining: recompute the rate holding last period's segment weights fixed, and compare that counterfactual to the actual, so the mix effect and the rate effect are separated numerically rather than argued about. Segment on the dimensions that actually reweight, which in this domain are almost always device_type, referrer_channel, country and new versus returning.
Analysing at a different unit than the one randomised
Say out loud what was randomised (user, device, account, cluster) and make the analysis unit match, or account for the clustering with cluster-robust standard errors, the delta method, or aggregation up to the randomised unit. Randomising users and then running a test over sessions understates variance and inflates the false-positive rate.
Reporting a p-value with no effect size or interval
Give the estimated difference with a confidence interval in the units the business cares about, then say whether that whole interval is worth acting on. A p-value only addresses whether you can rule out exactly zero; it says nothing about magnitude.
Choose a category, try a prompt, then open its approach, worked solution or follow-up when you need it.
What are the assumptions underlying linear regression, and how do you …
What are the assumptions underlying linear regression, and how do you validate them?
Approach
- Pick an evaluation metric that matches the cost of each error type, not a default.
- Frame the prediction: the label, the moment of prediction, and the action it triggers.
- Check what information would not exist at prediction time, and exclude it.
Follow-up
- What would you monitor after launch to know the model is still valid?
- How would you choose the decision threshold, and who owns that choice?
How would you approach a situation where your training data is highly …
How would you approach a situation where your training data is highly imbalanced?
Approach
- Frame the prediction: the label, the moment of prediction, and the action it triggers.
- Set a baseline first, so any model has something honest to beat.
- Say how the offline result would be validated online before it is trusted.
Follow-up
- Where could label leakage enter this setup?
- What would you monitor after launch to know the model is still valid?
Sessionise an event stream with gap and midnight rules
Sessionise a raw event stream. Input: a DataFrame with visitor_id, user_id (often NULL), occurred_at_utc and event_name, unsorted, up to 5 million rows. A session breaks when the gap from that visitor's previous event exceeds 30 minutes, and is force-closed at UTC midnight so no session spans two calendar dates. A gap of exactly 30 minutes does not break. Emit one row per session with session_id, visitor_id, the user_id as of the last event in the session, started_at_utc, ended_at_utc, session_date, duration_seconds and event_count. Vectorise; do not loop per visitor.
Approach
- Sort by ['visitor_id', 'occurred_at_utc', 'event_id'] once, then express the whole problem as one boolean vector: a row starts a new session when the visitor changed, or the gap exceeds 30 minutes, or the UTC date differs from the previous row's UTC date. Cumsum that vector and you have the session key.
- Get the comparison direction right on the gap: the rule is strictly greater than 1800 seconds, so an event at exactly 1800 seconds continues the session. Write it as gap > pd.Timedelta(minutes=30), and make the tie a test case rather than an assumption.
- Derive the midnight break from the date change, not from inserting synthetic boundary rows. A date change implies a break even when the gap is two seconds, which is precisely the force-close rule and is why the two conditions are ORed rather than one subsuming the other.
- Aggregate with a single groupby on the session key: min and max of occurred_at_utc, size for event_count, and last for user_id, which is correct because the frame is already sorted so 'last' is the final event in the session. That is the identity-as-of-session-end rule.
- Compute duration_seconds as (max - min).dt.total_seconds(), which makes a single-event session 0 seconds. Say so explicitly, because a downstream mean session duration is sensitive to whether single-event sessions are 0 or excluded.
Worked solution 35 min
- df = df.sort_values(['visitor_id','occurred_at_utc','event_id']).reset_index(drop=True).
- new_visitor = df.visitor_id.ne(df.visitor_id.shift()); gap = df.occurred_at_utc.diff(); new_day = df.occurred_at_utc.dt.date.ne(df.occurred_at_utc.dt.date.shift()).
- is_start = new_visitor | (gap > Timedelta(minutes=30)) | new_day; df['session_key'] = is_start.cumsum().
- g = df.groupby('session_key'); out = g.agg(visitor_id=('visitor_id','first'), user_id=('user_id','last'), started_at_utc=('occurred_at_utc','min'), ended_at_utc=('occurred_at_utc','max'), event_count=('event_id','size')).
- out['session_date'] = out.started_at_utc.dt.date; out['duration_seconds'] = (out.ended_at_utc - out.started_at_utc).dt.total_seconds(); assign session_id from the sorted index.
Follow-up
- Sessions are used as the denominator of a conversion rate. How does moving the inactivity gap from 30 to 45 minutes move that rate, and in which direction?
- A visitor's clock is 40 minutes ahead, so their events arrive with future occurred_at values. What does your sessioniser do, and what would you rather it did?
- The same person signs up mid-session on mobile and continues on desktop. How many sessions and how many users does your output show, and is that the right answer?
Describe your process for optimizing a slow-running SQL query that joi…
Describe your process for optimizing a slow-running SQL query that joins several large tables.
Approach
- Compute rates by summing numerator and denominator separately, never by averaging rates.
- Check whether any join is one-to-many before aggregating, or the sums inflate.
- State the window function and its partition and ordering out loud before writing it.
Follow-up
- What breaks if events arrive late or out of order?
- How would you verify this result without re-running the same query?
Given a table of user interactions, write a query using SQL window fun…
Given a table of user interactions, write a query using SQL window functions to calculate a rolling average of session durations.
Approach
- Compute rates by summing numerator and denominator separately, never by averaging rates.
- Check whether any join is one-to-many before aggregating, or the sums inflate.
- State the window function and its partition and ordering out loud before writing it.
Follow-up
- How does the query change if the join becomes one-to-many?
- How would you verify this result without re-running the same query?
Paying accounts with no active seat in 28 days
dim_account holds account_id, account_type, lifecycle_status, seats_licensed. fct_event holds account_id, user_id, occurred_at_utc, is_core_action, and its account_id is NULL for every signed-out and pre-signup event. Find accounts with lifecycle_status = 'active' and account_type <> 'internal' that had no distinct user complete a core action in the trailing 28 days. Return account_id, seats_licensed and days since that account's most recent core action, with NULL where the account has never emitted one. Order by seats_licensed descending.
Approach
- Build the recent-activity set first: fct_event rows with is_core_action = TRUE, occurred_at_utc >= now() - interval '28 days', and an explicit account_id IS NOT NULL. Making the NULL exclusion explicit in the CTE is what lets you reason about the anti-join afterwards.
- Express the exclusion with NOT EXISTS (correlated on account_id) or a LEFT JOIN with an IS NULL guard. Do not use NOT IN against this column: it is nullable, and SQL's three-valued logic turns the whole predicate UNKNOWN, returning zero rows.
- Compute last-seen separately as MAX(occurred_at_utc) per account over all history, LEFT JOINed on, so an account that has never emitted a core action (NULL) is distinguishable from one that went quiet six weeks ago. Those two cases have different causes and different owners.
- Rank by seats_licensed, or better by the account's current mrr_cents_constant_fx if you are allowed the subscription table, because a silent fifty-seat account is a renewal conversation and a silent one-seat account is noise.
- Before shipping, check whether the never-seen group is a cluster by signup date or surface. A block of accounts with no events at all is usually an instrumentation gap, not a set of customers who stopped using the product.
Worked solution 25 min
- Count NULL account_id rows in fct_event over the window so you know the trap is live in this data rather than hypothetical.
- Write the active-account spine and the 28-day activity CTE.
- Write the anti-join with NOT EXISTS, then deliberately run the NOT IN version and record that it returns zero rows.
- Add the all-time MAX(occurred_at_utc) LEFT JOIN and derive days_since as a date difference.
- Split the output into 'quiet' and 'never seen' and eyeball the never-seen group for a shared signup window or surface.
Follow-up
- How would you distinguish a genuinely idle account from one whose events lost their account_id after an instrumentation change?
- Would you count on fct_event.account_id or resolve user_id through dim_user instead, and what does each choice miss?
- Licensed-seat utilisation is the continuous version of this. How would you turn this boolean into that ratio?
How would you design a product metric to measure the success of an aut…
How would you design a product metric to measure the success of an automated network optimization feature?
Approach
- Fix the population and the time window before naming any metric.
- State what result would change your recommendation, so the answer is falsifiable.
- Restate the decision this analysis has to support, and who acts on the answer.
Follow-up
- What would you do if the primary metric and the guardrail moved in opposite directions?
- How would you detect that the metric is being gamed rather than genuinely improving?
If you notice a sudden drop in a key engagement metric for our AI plat…
If you notice a sudden drop in a key engagement metric for our AI platform, how would you diagnose the root cause?
Approach
- State what result would change your recommendation, so the answer is falsifiable.
- Name one primary metric, then the guardrail that stops it being gamed.
- Decompose the metric into the rates that drive it, and say which one you would check first.
Follow-up
- How would you detect that the metric is being gamed rather than genuinely improving?
- What would you do if the primary metric and the guardrail moved in opposite directions?
How do you determine the required sample size to ensure statistical si…
How do you determine the required sample size to ensure statistical significance?
Approach
- State the primary metric and the minimum effect worth shipping, then size the test.
- Decide the analysis before seeing data, including how long it runs and when you look.
- Say whether units interfere with each other, and switch design if they do.
Follow-up
- How would you handle interference between treated and control units?
- What would you do if you could not randomise at all?
Walk me through the setup of an A/B test for a new model deployment. W…
Walk me through the setup of an A/B test for a new model deployment. What are the common experimentation pitfalls you look out for?
Approach
- Name the randomisation unit first; it decides the variance and what the test can detect.
- State the primary metric and the minimum effect worth shipping, then size the test.
- Say whether units interfere with each other, and switch design if they do.
Follow-up
- What would you conclude if the result is positive but the test is underpowered?
- How would you handle interference between treated and control units?
Measure whether self-serve help actually answered the question
A help widget opens in-product. Leadership asks for the percentage of users who got their answer. You have fct_event (event_name, user_id, session_id, occurred_at_utc, is_core_action, properties JSONB carrying article_id), fct_session, and a support ticket table joined on user_id. Nothing records whether the answer was correct or whether the user was satisfied, and no such field is being added. Propose the metric you would publish, state the proxy plainly, name the direction and rough size of its bias, and say which decisions it can and cannot support. Deliverable: the definition plus the bias statement.
Approach
- Say first that the target quantity is unobserved and will stay unobserved: nothing in the stream distinguishes a user who was helped from one who gave up, and both leave the same trace, so every candidate metric here is a proxy and the only question is which bias you prefer.
- Build the proxy to remove the largest identifiable error: among widget-open sessions, the share with no ticket from that user within 72 hours and at least one is_core_action = TRUE event after the widget opened in the same session. The downstream action requirement strips out most of the silent abandonment that a no-ticket rule alone scores as success.
- State the residual bias with a direction and a bound: it still over-counts, because a user who gave up and went elsewhere files no ticket and may still complete an unrelated core action later in the session; bound it using the observable population of widget-open sessions that end within two minutes with no further event.
- Publish a directly-measured companion with its own weakness in the same sentence: article thumbs up/down reported with its response rate, and the note that a single-digit response rate missing non-randomly toward annoyed users is exactly why it cannot be the headline.
- Write the use statement, because a proxy without one gets reused for the wrong decision: valid for ranking articles against each other and for detecting a week-on-week break, invalid as an absolute deflection rate or as an input to a cost-saved figure.
Worked solution 25 min
- Write the unobservable target in one sentence with the observable set beside it, so the gap is visible on the page rather than assumed away.
- Define the published proxy with exact numerator and denominator, including the session scoping of the downstream core action.
- Bound the bias from data you already have: compute the share of widget-open sessions ending within two minutes with no further event.
- Publish the thumbs signal beside it with its response rate and the direction of its missingness.
- Write the two-line use statement covering what the number supports and what it does not.
Follow-up
- How would you validate this proxy once, and what would you do if the validation said it over-counts by 20 points?
- Support asks for a dollars-saved number from this metric. What do you say, and what would you need before saying anything else?
- Ticket volume drops the week support hours change. How do you keep that out of the series?
Decide whether a one-day core-action drop is real
A daily dashboard counts distinct fct_event.user_id with is_core_action = TRUE, filtered on occurred_at_utc, and is read at 09:00 UTC. This morning it shows yesterday down 22% against the day before. fct_event is partitioned on received_at_utc. You have fct_event, fct_session and dim_user with thirteen months of history. Deliver a one-paragraph verdict, escalate or do not escalate, with the evidence that settles it, before anyone proposes a product hypothesis.
Approach
- Identify which two weekdays the comparison actually spans, then pull the same weekday-pair transition for the last 52 weeks and place the observed 22% inside that distribution. A day-over-day comparison in a product with a weekday pattern is a comparison of two different populations, so the reference class is the same transition historically, not the prior day.
- Measure partition completeness rather than assuming it. For each of the last 30 days compute the share of that day's occurred_at_utc rows that had landed by 09:00 UTC the following morning, split by surface; mobile clients buffer events offline, so the freshest partition is systematically short and the shortfall is not uniform across surfaces.
- Recompute the same series keyed on received_at_utc. If the drop survives on both keys it is not a lateness artefact; if it exists only on occurred_at_utc it is the partition filling in.
- Check the two exclusion flags before segmenting anything: a change in is_bot_flagged coverage or a batch of is_internal accounts entering or leaving moves a distinct-user count with no user behaviour behind it.
- Only if the movement survives all of the above, begin the segment decomposition. Say explicitly in the verdict which of these four checks the movement passed, so the next reader does not repeat them.
Follow-up
- What publication lag would you set for this dashboard, and how would you derive the number rather than pick it?
- If you switch the metric to received_at_utc, what does that break for anyone comparing to historical figures?
- How would you detect the same problem automatically, so a human does not have to notice it each morning?
For someone who has spent the last year in notebooks, dashboards or modelling work and has not written raw SQL under time pressure. The first four days rebuild query fluency against a fixture you control and can verify by hand; the last three attach that fluency to the rest of the loop.
Prepare, practise & reflect
One practical outcome each day. Spend longer where you need it.
0 / 7 done01Build a fixture you can check answers against
- Create a local Postgres or SQLite database with four tables (users, sessions, events, orders) holding roughly 200 rows you generated yourself, so you know the contents well enough to predict every result.
- Deliberately seed the cases that break queries: a user with no sessions, a session with no events, two orders sharing a timestamp, a NULL in one join key, and one duplicated user row.
- Before writing any SQL, hand-compute five answers on paper (how many users placed at least one order, median orders per ordering user, and three others) and save them as the ground truth for the week.
Deliverable: A one-command seed script plus a text file of five hand-computed answers to grade every later query against.
Practice prompt ↗Practice prompt ↗Practice prompt ↗Worked solution ↗02Joins, filters and NULL semantics
- Answer "which users have no orders" three ways (LEFT JOIN with IS NULL, NOT EXISTS, NOT IN) and confirm that the NOT IN version returns zero rows once the subquery contains a NULL, because the comparison is never TRUE.
- Reproduce the LEFT JOIN that silently collapses to an inner join by putting a right-table predicate in WHERE, then fix it by moving the predicate into the ON clause, and record both row counts.
- Create a fan-out bug on purpose by joining orders to order_items and summing the order total, then correct it with a pre-aggregated subquery and explain in one line which table changed the grain.
Deliverable: One annotated .sql file holding the three join traps, each with the wrong result and the corrected result side by side.
Practice prompt ↗Practice prompt ↗03Window functions and frames
- Write three window queries against the fixture: a running order total per user, the rank of each order within its user by value, and the day gap to that user's previous order, then check each against the day-one ground truth.
- Run ROW_NUMBER, RANK and DENSE_RANK over a column containing ties, print all three side by side, and write one sentence on when each is the correct choice.
- Switch one query from the default frame (RANGE BETWEEN UNBOUNDED PRECEDING AND CURRENT ROW, which is what you get when ORDER BY is present and no frame is written) to ROWS BETWEEN UNBOUNDED PRECEDING AND CURRENT ROW, and explain why the output differs only when the ORDER BY column has duplicates.
Deliverable: Three verified window queries plus a short note explaining the RANGE versus ROWS difference in your own words.
Practice prompt ↗Practice prompt ↗04The four analytical query patterns
- Write a monthly retention grid: first order month per user, then months-since-first as the column, and verify that month zero equals the cohort size exactly.
- Sessionize the events table under a 30-minute inactivity rule using LAG plus a cumulative sum over a new-session flag.
- Build a four-step funnel that counts distinct users rather than events at each step, and state the rule you applied to a user who reaches step three without ever logging step two.
Deliverable: One file with the retention, sessionization and funnel patterns, each carrying a one-line note on the assumption it bakes in.
Practice prompt ↗Practice prompt ↗Worked solution ↗05Write SQL the way you will have to write it live
- Set a 12-minute timer and solve three medium prompts in a plain editor with no execution and no autocomplete, then run them and tally syntax errors separately from logic errors.
- Narrate one solution aloud while writing it, stating the grain of each intermediate result (one row per user, one row per user-day) before you type its body.
- Rewrite your slowest solution as a CTE chain where every CTE name states its grain, and time yourself re-solving it from blank.
Deliverable: A recording of one narrated solution plus an error tally that separates syntax from logic.
Practice prompt ↗Practice prompt ↗06One day for everything that is not SQL
- Write the preconditions of the two-sample t-test from memory, then check them: independent observations, and a difference in means whose sampling distribution is approximately normal, which at large sample sizes follows from the central limit theorem rather than from normality of the raw values.
- Write the difference between an odds ratio from logistic regression and a relative risk, and state the condition under which the two are close (low outcome prevalence).
- Prepare a 90-second answer to "how would you know this model is any good" that names the metric, the baseline you would beat, and the cost of the errors you care about.
Deliverable: One page of notes covering test preconditions, the odds-ratio caveat and the model-quality answer.
Practice prompt ↗Practice prompt ↗07Full loop rehearsal
- Run a 45-minute mock with someone willing to interrupt: 20 minutes of SQL, 15 minutes defining a metric, 10 minutes on a past project.
- Re-solve from blank the two queries you were slowest on this week and compare the times against day five.
- Write a five-line answer to "walk me through a project" that puts a number in the first sentence and names the decision the work changed.
Deliverable: Mock feedback notes plus a timed project narrative you can deliver without reading it.
Practice prompt ↗Practice prompt ↗Worked solution ↗Expand any day for tasks and deliverables. Your progress is saved on this device.
Interviewers here are not checking whether you can describe a project. They want the decision you made, why you made it under the information you had, and what changed afterwards that someone else could measure. A story that ends at 'I built a model' has no ending. Say what the model caused, or what you stopped doing because of it.
Tell me about a project where you faced a significant technical roadbl…
Tell me about a project where you faced a significant technical roadblock. How did you resolve it?
Approach
- State the situation in two sentences and spend the rest on your reasoning.
- Close with what you would do differently, concretely.
- Quantify the outcome, including what you would not claim credit for.
Follow-up
- What did you decide not to do, and why?
- How did you know the outcome was caused by your change?
Walk through an analysis you got wrong and what changed
Describe an analysis of yours that turned out to be wrong after somebody had already acted on it. You have four minutes. The account must name the defect mechanically, the join, the filter, the window or the identity key, rather than describing it as a communication problem. It must also say who did what because of the wrong number, how the error surfaced, how long it stood, and what control you put in place so that class of error cannot reach a decision again. Do not pick an error nobody acted on.
Approach
- Recognise what is being probed: whether you can be specific about your own failure without minimising it or performing contrition. The discriminator is whether the defect has a mechanism the listener could reproduce in their own warehouse.
- Choose the case by blast radius rather than by comfort. An error nobody acted on tests nothing, and picking one signals that you are managing the interview instead of answering it.
- Structure the account in six beats: the number, the decision it drove, the defect, the detection, the correction, the control. Keep the defect to one reproducible sentence, for example an inner join to fct_subscription_period that dropped accounts with no subscription row and so computed retention over payers only.
- State the direction of the bias, not only its existence. A filter or join that removes rows usually moves a metric predictably, and knowing which way shows you diagnosed the mechanism rather than patched the symptom.
- Be exact about detection and elapsed time. 'A colleague noticed' and 'the row-count assertion failed before publication' are different answers about the same organisation, and the second one is the one your control is supposed to produce next time.
- End on the control, its cost, whether it has fired since, and one thing it does not cover.
Follow-up
- What did the control cost, and has it fired since? If it never has, how do you know it works?
- How long did the wrong number stand before anyone questioned it, and what does that say about the review path it went through?
- What is the equivalent mistake you are most likely to make in this role, given the tables you would be working in?
Quantify your own impact without claiming the topline you touched
You are writing the impact section of your own review. Over the year you ran four experiments, one of which shipped and three of which were flat; you corrected the definition of gross monthly revenue churn so that cancellation is recognised at period_end_utc; and you built a self-serve funnel dashboard. Weekly active accounts rose 14% over the same period. Your reviewer knows the data well. Write the three impact claims you would defend, stating for each what you contributed, what evidence supports it, and what portion of the outcome you are not claiming.
Approach
- Recognise what is being probed: whether you apply to your own work the causal standard you would apply to somebody else's roadmap claim. Nearly everyone who would reject 'accounts that do Y retain better' will write 'I drove a 14% increase' without noticing it is the same error with a friendlier subject.
- Sort the work by the kind of evidence it can carry. The shipped experiment is the only item with a randomised estimate, so it is the only one where an effect size is defensible, and you claim the interval rather than the point estimate.
- Claim the three flat experiments as decisions prevented and price them. Features not built, or built differently, on evidence, with the engineering weeks reallocated as the number somebody else can verify. A defensible null is a delivered decision and should be written as one.
- Claim the definition fix as correctness, not as improvement. The old figure was overstated by a specific percentage and appeared in a specific set of recurring documents; the impact is the change it produced in the forecast built on top of it, not a change in churn itself.
- Claim the dashboard on usage and displacement: distinct weekly users of it, and the ad-hoc request count for six months before against six months after. If the request log does not exist, record the claim as unverified rather than estimating it upward.
- Disclaim the 14% explicitly and once. State that it cannot be separated from seasonality, other teams' launches and a pricing change, and bound your own contribution from above using the shipped experiment's interval converted into headline units.
Follow-up
- Your shipped experiment's interval was +0.2pp to +1.4pp on activation. How much of the 14% can that account for, and how do you say so without undercutting yourself?
- A peer in the same cycle claims the full 14%. What, if anything, do you do about it?
- If you could only keep two of your three claims, which do you drop, and why that one?
- 01
Tell me about a project where you faced a significant technical roadblock. How did you resolve it?
- 02
Describe an analysis of yours that turned out to be wrong after somebody had already acted on it. You have four minutes. The account must name the defect mechanically, the join, the filter, the window or the identity key, rather than describing it as a communication problem. It must also say who did what because of the wrong number, how the error surfaced, how long it stood, and what control you put in place so that class of error cannot reach a decision again. Do not pick an error nobody acted on.
- 03
You are writing the impact section of your own review. Over the year you ran four experiments, one of which shipped and three of which were flat; you corrected the definition of gross monthly revenue churn so that cancellation is recognised at period_end_utc; and you built a self-serve funnel dashboard. Weekly active accounts rose 14% over the same period. Your reviewer knows the data well. Write the three impact claims you would defend, stating for each what you contributed, what evidence supports it, and what portion of the outcome you are not claiming.
Is this an official Mavenir interview guide?
No. It is PracHub's own research and practice material for the Data Scientist role at Mavenir. Rounds and questions reflect what candidates have reported, not a process Mavenir has published, and they change over time. Confirm the current format and scope with your recruiter.
PracHub interview research ↗How much time should I spend preparing?
Most successful candidates dedicate at least 2–3 weeks to focused study, specifically reviewing their own past projects and brushing up on core statistical and SQL concepts.
PracHub interview research ↗What is the most important thing to emphasize during the interview?
Focus on the "why" behind your decisions. Mavenir interviewers value candidates who can explain their reasoning for choosing one model or method over another, especially in the context of business constraints.
PracHub interview research ↗Is the technical interview very coding-heavy?
While there is a coding component, the focus is on your ability to use tools to solve data problems. You should be comfortable writing clean, efficient SQL and Python code under pressure.
PracHub interview research ↗How can I stand out?
Demonstrate a genuine passion for the latest in AI/ML research. Being able to discuss how you stay updated and how you might apply new advancements to Mavenir’s specific challenges is a significant differentiator.
PracHub interview research ↗Sources & methodology 3 sources ↗
No official company page is cited. Rounds and questions come from candidate reports and PracHub editorial material; each source shows the date it was read.
- 01PracHub interview research ↗
PracHub editorial research into this company and role, maintained with this guide. Candidate-reported, not an employer publication.
PracHub page · Accessed 2026-09-22 - 02PracHub Data Scientist practice ↗
Cross-company practice questions for this role.
PracHub page · Accessed 2026-09-22 - 03PracHub interview preparation framework ↗
The framework the preparation plan follows.
PracHub page · Accessed 2026-09-22
Explore related engineering environments and compare the preparation focus.
Fetch Rewards Data Scientist Interview Questions & Guide 2026
Product-sense practice for a Fetch Rewards data scientist interview: define a product and business analytics metric, pick its guardrails, and argue why a tempting alternative would mislead you.
1 digit technology Pvt Data Scientist Interview Questions & Guide 2026
Take-home style practice for data scientists preparing for 1 digit technology Pvt: a messy dataset, a fixed time budget, and a written analysis, reviewed for whether it states its assumptions and whether a reader could reproduce your number
xAI Data Scientist Interview Questions & Guide 2026
Communication practice for xAI data scientist candidates: turn an analysis into a recommendation, name the uncertainty honestly, and answer the follow-up a skeptical stakeholder will raise.
Windfall Data Scientist Interview Questions & Guide 2026
Data-quality drills for Windfall data scientist prep: survivorship and selection bias, leakage through time-ordered features, and extreme values where provenance decides the call. A logging fault or unit slip gets corrected or dropped; a ge