At McKinsey &, the Data Scientist role—often embedded within QuantumBlack, AI by McKinsey—serves as the critical bridge between complex technical analytics and high-impact strategic consulting. Rather than building models in isolation, Data Scientists at McKinsey work directly on client engagement teams to solve high-stakes business and operational problems. Whether optimizing supply chains, predicting client churn, building generative AI architectures, or designing scalable data pipelines for global enterprises, your work directly informs C-suite decision-making.
What makes this position distinct from typical corporate data science roles is its deep emphasis on end-to-end impact and client communication. You are expected to exhibit technical mastery in machine learning, feature engineering, and statistical modeling while maintaining the business acumen required to translate complex algorithmic outputs into actionable executive recommendations. You will work alongside management consultants, machine learning engineers, and data engineers to deliver enterprise-grade analytics solutions under tight, client-driven timelines.
Candidates entering this pipeline face a rigorous, highly structured evaluation process. Success requires a balance of algorithmic fluency, production-ready coding practices, rigorous statistical problem-solving, and the signature McKinsey & consultative approach—framing ambiguous business challenges into structured, hypothesis-driven analytical pipelines.
Recruiter Phone Screen
reportedA screening call is a matching exercise run by someone who will not evaluate your statistics. They are checking that the work described on your resume is work you personally did, and that its scope matches the level the role is written for. Logistics get settled in the same half hour so nobody spends an interviewer's afternoon on a mismatch. The answer that fails is the one narrated in the plural. If every sentence is 'we built' and 'the team decided', there is nothing specific to write down about you. Name the piece that was yours, the decision you made inside it, and what changed after.
What to demonstrate
- Whether the ownership implied by your resume survives one round of follow-up about who actually did which part
- Whether your described scope (data size, stakeholders, what shipped) matches the seniority the role is written at
- Whether timeline, location and compensation expectations make the rest of the loop worth scheduling
How to prepare
- Rewrite your top three resume bullets in the first person singular, each with the decision you made and what moved afterwards, then say them out loud once so the 'we' does not return under pressure
- Attach one number to each project: the baseline, the change, and the window it was measured over. Where impact was never measured, say that plainly rather than inventing a figure
- Settle your compensation range before the call and give it as a range with a reason behind it, such as current total comp or a competing timeline, instead of deflecting the question twice
Online Assessment
reportedThis round decides whether someone can hand you a schema and a question and trust the number that comes back. Correctness under a clock is the bar, not clever syntax. The habit that separates strong from weak answers is checking the grain: after every join, know how many rows you expect and whether the count moved. Most wrong answers in this format are not wrong logic, they are a fan-out from a key that turned out not to be unique, or a filter applied before an aggregate when it belonged after. Say what you expect before you run it.
What to demonstrate
- Whether your row counts survive each join, and whether you notice on your own when they do not
- Deliberate handling of rows that fail to match, including whether the question needs an inner join or a left join with the non-matches kept and counted
- Whether NULLs are treated on purpose, given that a NULL compares equal to nothing and that COUNT of a column skips it
- Reaching a defensible answer inside the window instead of a refined one after it
How to prepare
- Take a two-table schema, write a join that fans out on purpose, then fix it by collapsing the many-side to one row per key before joining. Repeat until the fix is reflex rather than recall.
- Write a funnel as one query and print the distinct user count at each stage, then confirm each stage is a subset of the one above it rather than assuming it
- Do a few timed runs in a plain text box with no autocomplete and no formatter, since assessment editors often have neither
Virtual and Onsite Interviews
reportedA day of back-to-back interviews samples your floor, not your ceiling. Four hours in, the habits that carry a good answer are the first to go: restating the question before solving it, asking what the data would have to look like, checking a number before quoting it. What the day decides is whether the tired version of you is still someone to leave alone with an ambiguous problem. The round that sinks a candidate is usually not the hardest one. It is the one immediately after the round that went badly.
What to demonstrate
- Whether the late rounds get the same clarifying questions as the first one, or whether you start answering immediately to save effort
- Whether a weak answer stays in the room it happened in, instead of following you into the next conversation as apology or distraction
- Whether the quality of your questions holds up, since fatigue removes curiosity about the problem before it removes knowledge of the method
How to prepare
- Rehearse the length, not just the content: book four mock interviews of different types in one afternoon with short gaps, because the one you need to observe is the fourth
- Put the two or three questions you ask at the start of any problem on a card in front of you, so that under fatigue it is a habit you run rather than a decision you make
- Decide in advance what the gap between rooms is for: water, one line of notes on anything you promised to follow up, and an explicit close on the round that just ended so it does not travel
- Prepare a different closing question for each interviewer, so the end of a long day does not produce the same one four times
Personal Experience Interviews
reportedBecause the format is not fixed, prepare the reasoning rather than the ritual. Nearly every version of this round draws on the same underlying material: a design you can defend, a metric you can define exactly, an analysis whose assumptions you can state out loud. Only the wrapper changes, whether that is a take-home, a live case, a deep dive on past work, or a rough estimate on a whiteboard. Answers rehearsed to fit one shape stall the moment the shape differs. Practise naming the assumption behind a number, then saying how much the conclusion moves if that assumption is wrong.
What to demonstrate
- Whether your justification for a method survives the question 'why not the simpler thing', including when the simpler thing would have worked
- Precision under pressure: what exactly counts as an active user, a conversion or a success, over what window, with what exclusions
- Whether you carry an argument through to a recommendation instead of stopping at a list of tradeoffs
How to prepare
- For each project you plan to mention, write the metric definition in one sentence: numerator, denominator, time window, exclusions. Say it out loud once, because vagueness shows up in speech before it shows up on paper.
- Rehearse the same project at three lengths: two minutes, ten minutes, and a deep dive on one technical decision. Cutting live is harder than it sounds.
- For your headline result, write down what would have had to be true for it to be wrong, and how you ruled that out.
Technical Experience Interviews
reportedBefore anything else, this round is a reading test. You are given a small schema and a question phrased in business language, and most of the difficulty sits in the gap between them. Who counts as an active user, does a refunded order still count as an order, is that date column an event time or a load time. Weak answers start typing immediately and compute something precise about the wrong population. Strong ones pin the definition in one sentence, name the column that encodes it, then write the query. On a timed assessment with nobody to tell, write the definition in a comment anyway.
What to demonstrate
- Whether an ambiguous term becomes a specific column and filter before any computation happens
- Whether you read the schema for keys and cardinality rather than only for column names
- Whether the result answers the question at the grain it was asked at, per user or per session or per day
How to prepare
- Take three metrics you already use and write down the exact filter and exact grain behind each, then practise stating one of them in a single sentence out loud
- On a schema you have never seen, spend the first minute writing what one row of each table means and which key it is unique on, then predict which joins can duplicate rows
- Rehearse a version where the definition changes halfway through, and edit the query you have instead of starting over
Interactive Case Studies
reportedA case round is decided by whether you leave the interviewer with a recommendation, not by how much analysis you narrate on the way there. The prompt is open on purpose, so the first job is to convert it into a decision someone could act on: ask what would be done differently depending on the answer. From there name the quantity that would settle it, state the assumptions you need, and commit. Candidates who cover more ground than anyone expected and still end on "it depends" score below candidates who scoped narrowly and said what they would do.
What to demonstrate
- Whether the version of the question you choose to answer is genuinely narrower than the prompt and still worth answering
- Whether the recommendation arrives as an action with a number attached, rather than as a summary of what you looked at
- Whether assumptions are stated at the moment you rely on them, instead of collected into a disclaimer at the end
- Whether you notice when a branch you are exploring would not change the decision either way
How to prepare
- Take six open prompts and write only the scoping move for each: the one-sentence question you would actually answer and the decision it feeds. Give yourself three minutes per prompt and stop there.
- Put a five-minute warning into every practice case and force a closing statement that names the action, the result that would justify it, and the result that would reverse it.
- Record one case and count how long you talked before naming a measurable quantity. Past roughly five minutes, what you are calling scoping is narration.
PracHub editorial advice for the preparation topics above.
Watching an experiment daily and stopping when it crosses significance
A fixed-sample test controls type I error at one pre-declared look. Checking repeatedly and stopping at the first p < 0.05 inflates the false positive rate to roughly 0.15 to 0.20 for ten looks, and it rises further with more frequent checks, because the p-value takes a random walk that will eventually dip below the threshold under the null. The usual defences are a fixed horizon declared before launch, group-sequential boundaries such as O'Brien-Fleming that spend alpha across a planned number of looks, or always-valid confidence sequences that are correct under continuous monitoring. Compounding it, the effect size reported conditional on having crossed the threshold is biased away from zero, and the bias is larger the lower the power was, so an underpowered test that 'won' typically overstates the lift it found.
Treating last-touch attribution as the causal value of a channel
The attribution label on dim_user is the output of a rule that assigns full credit to whichever touch happened to be recorded last inside a lookback window, and that rule systematically rewards channels that sit close to the conversion, especially branded search and retargeting, which largely intercept demand that already existed. Reallocating spend on those labels moves budget toward the channels that are best at being last, which is why attributed return on ad spend often improves while total signups do not. Nothing in the touchpoint data can settle this, because the counterfactual of not running the channel was never observed. The credible reads are a geo holdout or a scheduled pause, sized in advance on the total-signups metric rather than on the attributed one, and the honest framing in the meantime is that the label describes correlation with conversion and not incremental contribution.
Sizing estimates built on unnamed, unrevisable assumptions
Write each assumption as a named number you can change, then show the arithmetic so the interviewer can challenge one input instead of the whole answer. Finish by saying which assumption the result is most sensitive to, which matters more than the point estimate.
Ending an analysis without a recommendation or next step
Close with what you would do and what would change your mind, stated as a condition you can check later. If the evidence is genuinely inconclusive, recommend the specific next measurement and say what it costs in time or exposure.
Choose a category, try a prompt, then open its approach, worked solution or follow-up when you need it.
Given a time-series dataset with missing humidity or environmental rea…
Given a time-series dataset with missing humidity or environmental readings, write a Python script using pandas or non-linear regression to impute missing values without introducing data leakage.
Approach
- Pick an evaluation metric that matches the cost of each error type, not a default.
- Set a baseline first, so any model has something honest to beat.
- Frame the prediction: the label, the moment of prediction, and the action it triggers.
Follow-up
- What would you monitor after launch to know the model is still valid?
- Where could label leakage enter this setup?
Permutation test for a difference in conversion rates
Write a two-sided permutation test from scratch for a difference in conversion rates, using no scipy hypothesis function. Input: a DataFrame with unit_id, variant in {control, treatment} and converted in {0,1}, one row per randomisation unit. Compute the observed difference in proportions, then build the null distribution by reshuffling the variant labels while holding each arm's size fixed. Report the p-value as (1 + the count of permuted statistics at least as extreme in absolute value) / (B + 1) with B at least 10,000, and return the permutation distribution.
Approach
- Name the null being tested: the sharp null that each unit's outcome is the same under either label. That is what licenses permuting labels, and it is stronger than the null of equal means, which matters when someone asks whether the test is valid under unequal variances.
- Extract converted to a single numpy array of 0s and 1s and record n_treatment. Every permutation is then just a reshuffle of one array, and the treatment mean is the mean of the first n_treatment entries of the shuffled array.
- Vectorise the B permutations with rng.permuted on a tiled 2-D array, or with argsort of a (B, n) random matrix. A Python loop calling np.random.shuffle B times is correct but roughly an order of magnitude slower and often runs past the time limit.
- Use the +1 correction in both numerator and denominator. Without it a p-value of exactly 0 is reportable, which is false: the observed labelling is itself one of the permutations, so the smallest attainable p-value is 1/(B+1).
- Compare the resulting p-value against a two-proportion z-test as a sanity check. At these sample sizes they should agree closely; a large divergence means the statistic or the shuffle is wrong, not that the permutation test found something subtle.
Follow-up
- The arms are 200 and 20,000 units. Does the permutation test stay valid, and what happens to its resolution at B = 10,000?
- Give a 95 percent confidence interval for the difference. Can you get it from this permutation distribution, and if not, what would you run instead?
- The randomisation unit is user_id but the outcome is per session. What breaks, and what is the fix?
Audit a one-day event extract for structural defects
You receive a one-day extract of fct_event as a DataFrame with event_id, occurred_at_utc, received_at_utc, visitor_id, user_id, account_id, event_name, is_bot_flagged and surface. Write a function returning one row per data-quality rule with the rule name, the failing row count and the failing share of the extract. Cover at minimum: duplicate event_id, received_at_utc earlier than occurred_at_utc, occurred_at_utc later than the extract's maximum received_at_utc, account_id present while user_id is NULL, and rows whose occurred_at date differs from their received_at date. Do not drop rows; report only.
Approach
- Compute the extract's own reference clock first: max(received_at_utc). Wall-clock now() is wrong here because the extract may be replayed days later, which would turn every row into a future-dated failure.
- Express each rule as a boolean Series over the same index so the checks compose, then aggregate with .sum() and divide by len(df). Building a list of (name, mask) pairs keeps the rule set extensible and keeps one code path for counting.
- For the duplicate rule, decide and state the convention: df.duplicated('event_id', keep=False).sum() counts every member of a duplicated group, df.duplicated('event_id').sum() counts only the surplus copies. Either is defensible; an unstated choice is not. The rest of this item assumes keep=False.
- Treat received_at < occurred_at as clock skew, not corruption: occurred_at is client-supplied. Separate it from the date-mismatch rule, which is the one that actually breaks a daily metric keyed on occurred_at.
- Know which rules imply which before you read the counts. A row whose occurred_at exceeds max(received_at_utc) has its own received_at no later than that maximum, so it is necessarily a clock-skew row as well: the future-dated mask is a subset of the skew mask, always. Neither is a subset of the date-mismatch mask, because skew of a few minutes inside one UTC date mismatches nothing.
- Return a tidy DataFrame sorted by failing_share descending, and add a boolean column saying whether the rule should block publication, so the output is a decision rather than a list of numbers.
Worked solution 20 min
- Parse both timestamp columns with utc=True and assert the dtype, since a silently-object column makes every comparison string-wise and wrong.
- Set ref = df['received_at_utc'].max() and build the five masks against it.
- Assemble results as pd.DataFrame(rows) with columns rule, failing_rows, failing_share, blocks_publication.
- Keep the masks addressable (a dict of name to Series) rather than only their sums, so the overlap between rules can be asserted rather than assumed.
- Verify the function is pure: assert the input frame's shape is unchanged after the call.
Follow-up
- The date-mismatch count is 2.1 percent on this extract. What late-arrival rule would you write for a daily metric, and how many days would you hold the number open?
- Duplicate event_id values appear only on the 'core_action_completed' event. What upstream cause would you check before deduplicating?
- Which of these rules should fire an alert at the pipeline, and which should only appear in a weekly review?
Given a transaction log, write code to identify and group similar enti…
Given a transaction log, write code to identify and group similar entities or duplicate user accounts across noisy categorical features.
Approach
- Check whether any join is one-to-many before aggregating, or the sums inflate.
- State the window function and its partition and ordering out loud before writing it.
- Say which table is the grain you start from, and join outward from it.
Follow-up
- How does the query change if the join becomes one-to-many?
- What breaks if events arrive late or out of order?
Write a SQL query using window functions (`SUM OVER`, `LEAD`, `LAG`) t…
Write a SQL query using window functions (SUM OVER, LEAD, LAG) to compute a 7-day rolling average of client transactions and identify consecutive days of declining performance.
Approach
- Compute rates by summing numerator and denominator separately, never by averaging rates.
- Check whether any join is one-to-many before aggregating, or the sums inflate.
- State the window function and its partition and ordering out loud before writing it.
Follow-up
- How would you verify this result without re-running the same query?
- How does the query change if the join becomes one-to-many?
Given a stream of numeric data, implement a real-time running median e…
Given a stream of numeric data, implement a real-time running median estimator using a max-heap and a min-heap.
Approach
- Compute rates by summing numerator and denominator separately, never by averaging rates.
- State the window function and its partition and ordering out loud before writing it.
- Say which table is the grain you start from, and join outward from it.
Follow-up
- How would you verify this result without re-running the same query?
- What breaks if events arrive late or out of order?
Paying accounts with no active seat in 28 days
dim_account holds account_id, account_type, lifecycle_status, seats_licensed. fct_event holds account_id, user_id, occurred_at_utc, is_core_action, and its account_id is NULL for every signed-out and pre-signup event. Find accounts with lifecycle_status = 'active' and account_type <> 'internal' that had no distinct user complete a core action in the trailing 28 days. Return account_id, seats_licensed and days since that account's most recent core action, with NULL where the account has never emitted one. Order by seats_licensed descending.
Approach
- Build the recent-activity set first: fct_event rows with is_core_action = TRUE, occurred_at_utc >= now() - interval '28 days', and an explicit account_id IS NOT NULL. Making the NULL exclusion explicit in the CTE is what lets you reason about the anti-join afterwards.
- Express the exclusion with NOT EXISTS (correlated on account_id) or a LEFT JOIN with an IS NULL guard. Do not use NOT IN against this column: it is nullable, and SQL's three-valued logic turns the whole predicate UNKNOWN, returning zero rows.
- Compute last-seen separately as MAX(occurred_at_utc) per account over all history, LEFT JOINed on, so an account that has never emitted a core action (NULL) is distinguishable from one that went quiet six weeks ago. Those two cases have different causes and different owners.
- Rank by seats_licensed, or better by the account's current mrr_cents_constant_fx if you are allowed the subscription table, because a silent fifty-seat account is a renewal conversation and a silent one-seat account is noise.
- Before shipping, check whether the never-seen group is a cluster by signup date or surface. A block of accounts with no events at all is usually an instrumentation gap, not a set of customers who stopped using the product.
Worked solution 25 min
- Count NULL account_id rows in fct_event over the window so you know the trap is live in this data rather than hypothetical.
- Write the active-account spine and the 28-day activity CTE.
- Write the anti-join with NOT EXISTS, then deliberately run the NOT IN version and record that it returns zero rows.
- Add the all-time MAX(occurred_at_utc) LEFT JOIN and derive days_since as a date difference.
- Split the output into 'quiet' and 'never seen' and eyeball the never-seen group for a shared signup window or surface.
Follow-up
- How would you distinguish a genuinely idle account from one whose events lost their account_id after an instrumentation change?
- Would you count on fct_event.account_id or resolve user_id through dim_user instead, and what does each choice miss?
- Licensed-seat utilisation is the continuous version of this. How would you turn this boolean into that ratio?
A local clothing retailer wants to improve customer acquisition and re…
A local clothing retailer wants to improve customer acquisition and retention. Walk through how you would structure an analytical solution from raw data to business impact.
Approach
- State what result would change your recommendation, so the answer is falsifiable.
- Name one primary metric, then the guardrail that stops it being gamed.
- Decompose the metric into the rates that drive it, and say which one you would check first.
Follow-up
- What would you do if the primary metric and the guardrail moved in opposite directions?
- How would you detect that the metric is being gamed rather than genuinely improving?
Walk me through a situation where you had to deliver a complex data sc…
Walk me through a situation where you had to deliver a complex data science project under an extremely tight timeline. How did you prioritize?
Approach
- Decompose the metric into the rates that drive it, and say which one you would check first.
- Fix the population and the time window before naming any metric.
- State what result would change your recommendation, so the answer is falsifiable.
Follow-up
- What would you do if the primary metric and the guardrail moved in opposite directions?
- Which segment would you cut first, and what would that rule out?
How would you diagnose a sudden 15% drop in an e-commerce platform's p…
How would you diagnose a sudden 15% drop in an e-commerce platform's primary conversion metric following a new feature release?
Approach
- State what result would change your recommendation, so the answer is falsifiable.
- Name one primary metric, then the guardrail that stops it being gamed.
- Fix the population and the time window before naming any metric.
Follow-up
- Which segment would you cut first, and what would that rule out?
- What would you do if the primary metric and the guardrail moved in opposite directions?
How do you measure statistical significance in an A/B test when sample…
How do you measure statistical significance in an A/B test when sample sizes are heavily imbalanced across test and control groups?
Approach
- Say whether units interfere with each other, and switch design if they do.
- Decide the analysis before seeing data, including how long it runs and when you look.
- State the primary metric and the minimum effect worth shipping, then size the test.
Follow-up
- What would you do if you could not randomise at all?
- What would you conclude if the result is positive but the test is underpowered?
What are the major experimentation pitfalls when testing a new feature…
What are the major experimentation pitfalls when testing a new feature on a two-sided marketplace platform (e.g., network spillovers, novelty effects)?
Approach
- Name the randomisation unit first; it decides the variance and what the test can detect.
- Decide the analysis before seeing data, including how long it runs and when you look.
- Name the guardrails that would stop a launch even on a positive primary result.
Follow-up
- What would you do if you could not randomise at all?
- How would you handle interference between treated and control units?
Reminder volume where the guardrail opposes the primary metric
The growth team proposes tripling weekly reminder email volume. The north star is weekly active accounts completing a core action, counted on account_id from fct_event (is_core_action, account_id, occurred_at_utc, surface). Its stated guardrail is week-over-week repeat rate together with notification opt-out and unsubscribe rates. Reminders will move the primary up and the guardrail down, by design, and both effects are real. Define the decision rule before the test runs: what magnitudes make this a ship and what makes it a stop. Deliverable: the rule, including the exchange rate you are using between the two quantities.
Approach
- Name the conflict precisely rather than calling it a balance: the reminder buys one week of an account returning and spends permission to contact that account, and permission is not renewable, so the two quantities are not comparable as percentage points.
- Put both sides into one unit before arguing about thresholds. Value the primary gain as incremental core-action weeks over the horizon; value an opt-out as the forgone email-driven active weeks over that account's remaining expected lifetime.
- Read opt-out as a stock, not a flow: accumulate it over the test, because a weekly opt-out rate that looks small is a cumulative curve that only ever rises within a fixed set of contactable accounts.
- Run long enough for the novelty to decay and use the late number in the trade: compare week-1 lift with week-4 lift, state the decay you observed, and refuse to price the decision on a week-1 read.
- Write the outcome as two numbers and a default action, including what happens when the result lands between them — hold and test a smaller volume increment rather than shipping on ambiguity.
Worked solution 30 min
- Measure the starting stock: current opt-out and unsubscribe rate per 1,000 contactable accounts, and the share of weekly active accounts whose session began from referrer_channel = 'email'.
- Estimate the two effects separately over four weeks: incremental weekly active accounts per 1,000 extra sends, and incremental cumulative opt-outs per 1,000 extra sends.
- Convert opt-outs into forgone active weeks: email-driven active weeks per account per year multiplied by remaining expected account lifetime, and set that against the incremental active weeks bought.
- Compare week-1 with week-4 lift, state the decay rate, and carry the week-4 figure into the trade.
- Write the rule as two thresholds plus a default action for the middle case.
Follow-up
- Opt-out is flat but week-over-week repeat rate falls. What is the most likely mechanism, and does it change the decision?
- You do not have a year of data to estimate remaining account lifetime. What do you substitute, and how do you keep the answer honest about that?
- Does randomising on account rather than on user change either the readout or the size of the test?
Size every candidate cause of a trial-to-paid decline
Trial-to-paid conversion on weekly trial-start cohorts from fct_subscription_period reads 3.1 points below the trailing eight-week mean for the three most recent cohorts. Three things happened in that window: a pricing experiment reached 50% of new trials, a payment processor migration added settlement delay, and paid_search spend tripled. Using fct_subscription_period, fct_experiment_exposure and dim_user, rank the causes by their contribution in points of the headline, state the remainder, and give the decision you would take on Monday.
Approach
- Kill the immature cohorts first, because everything downstream is computed on them. The metric is lagged by the trial length plus a 14-day conversion window plus a settlement allowance, and a processor migration lengthens exactly that last term; recompute each cohort at a fixed cohort age rather than as of today, and confirm the newest cohort's value is still climbing day over day.
- Hold the experiment analysis to the exposed population. Join fct_experiment_exposure on unit_id with is_in_analysis_population = TRUE rather than reading an assignment log, then check the variant split for a sample-ratio mismatch before believing any effect at all. Contribution to the headline is the variant effect multiplied by the exposed share, which is not the same number as the variant effect.
- Decompose the cohort mix by dim_user.first_touch_channel using the same weight-times-rate arithmetic as any other mix question, so the paid_search increase is sized as a weight change at a measured conversion rate rather than asserted from the spend figure.
- Convert all three to points of the headline, sum them, and print the residual against the historical week-to-week standard deviation of the metric. If the residual is inside that band, say so and stop looking; if it is outside, name what you would investigate next rather than leaving it implied.
- Land the decision. Only one of the three is actionable on Monday, so state whether the experiment has accrued enough exposed units to stop at the pre-declared horizon, and state separately what the settlement-lag correction does to the published series and its lag rule.
Follow-up
- How do you choose the fixed cohort age, and what do you lose by choosing it too long?
- If the pricing variant is genuinely 1.2 points worse, does that settle whether to stop it? What else is on the other side of that decision?
- The trailing eight-week mean spans the processor migration. What is the right baseline instead?
For someone who has spent the last year in notebooks, dashboards or modelling work and has not written raw SQL under time pressure. The first four days rebuild query fluency against a fixture you control and can verify by hand; the last three attach that fluency to the rest of the loop.
Prepare, practise & reflect
One practical outcome each day. Spend longer where you need it.
0 / 7 done01Build a fixture you can check answers against
- Create a local Postgres or SQLite database with four tables (users, sessions, events, orders) holding roughly 200 rows you generated yourself, so you know the contents well enough to predict every result.
- Deliberately seed the cases that break queries: a user with no sessions, a session with no events, two orders sharing a timestamp, a NULL in one join key, and one duplicated user row.
- Before writing any SQL, hand-compute five answers on paper (how many users placed at least one order, median orders per ordering user, and three others) and save them as the ground truth for the week.
Deliverable: A one-command seed script plus a text file of five hand-computed answers to grade every later query against.
Practice prompt ↗Practice prompt ↗Practice prompt ↗Worked solution ↗02Joins, filters and NULL semantics
- Answer "which users have no orders" three ways (LEFT JOIN with IS NULL, NOT EXISTS, NOT IN) and confirm that the NOT IN version returns zero rows once the subquery contains a NULL, because the comparison is never TRUE.
- Reproduce the LEFT JOIN that silently collapses to an inner join by putting a right-table predicate in WHERE, then fix it by moving the predicate into the ON clause, and record both row counts.
- Create a fan-out bug on purpose by joining orders to order_items and summing the order total, then correct it with a pre-aggregated subquery and explain in one line which table changed the grain.
Deliverable: One annotated .sql file holding the three join traps, each with the wrong result and the corrected result side by side.
Practice prompt ↗Practice prompt ↗Practice prompt ↗03Window functions and frames
- Write three window queries against the fixture: a running order total per user, the rank of each order within its user by value, and the day gap to that user's previous order, then check each against the day-one ground truth.
- Run ROW_NUMBER, RANK and DENSE_RANK over a column containing ties, print all three side by side, and write one sentence on when each is the correct choice.
- Switch one query from the default frame (RANGE BETWEEN UNBOUNDED PRECEDING AND CURRENT ROW, which is what you get when ORDER BY is present and no frame is written) to ROWS BETWEEN UNBOUNDED PRECEDING AND CURRENT ROW, and explain why the output differs only when the ORDER BY column has duplicates.
Deliverable: Three verified window queries plus a short note explaining the RANGE versus ROWS difference in your own words.
Practice prompt ↗Practice prompt ↗Practice prompt ↗04The four analytical query patterns
- Write a monthly retention grid: first order month per user, then months-since-first as the column, and verify that month zero equals the cohort size exactly.
- Sessionize the events table under a 30-minute inactivity rule using LAG plus a cumulative sum over a new-session flag.
- Build a four-step funnel that counts distinct users rather than events at each step, and state the rule you applied to a user who reaches step three without ever logging step two.
Deliverable: One file with the retention, sessionization and funnel patterns, each carrying a one-line note on the assumption it bakes in.
Practice prompt ↗Practice prompt ↗Worked solution ↗05Write SQL the way you will have to write it live
- Set a 12-minute timer and solve three medium prompts in a plain editor with no execution and no autocomplete, then run them and tally syntax errors separately from logic errors.
- Narrate one solution aloud while writing it, stating the grain of each intermediate result (one row per user, one row per user-day) before you type its body.
- Rewrite your slowest solution as a CTE chain where every CTE name states its grain, and time yourself re-solving it from blank.
Deliverable: A recording of one narrated solution plus an error tally that separates syntax from logic.
Practice prompt ↗Practice prompt ↗06One day for everything that is not SQL
- Write the preconditions of the two-sample t-test from memory, then check them: independent observations, and a difference in means whose sampling distribution is approximately normal, which at large sample sizes follows from the central limit theorem rather than from normality of the raw values.
- Write the difference between an odds ratio from logistic regression and a relative risk, and state the condition under which the two are close (low outcome prevalence).
- Prepare a 90-second answer to "how would you know this model is any good" that names the metric, the baseline you would beat, and the cost of the errors you care about.
Deliverable: One page of notes covering test preconditions, the odds-ratio caveat and the model-quality answer.
Practice prompt ↗Practice prompt ↗07Full loop rehearsal
- Run a 45-minute mock with someone willing to interrupt: 20 minutes of SQL, 15 minutes defining a metric, 10 minutes on a past project.
- Re-solve from blank the two queries you were slowest on this week and compare the times against day five.
- Write a five-line answer to "walk me through a project" that puts a number in the first sentence and names the decision the work changed.
Deliverable: Mock feedback notes plus a timed project narrative you can deliver without reading it.
Practice prompt ↗Practice prompt ↗Worked solution ↗Expand any day for tasks and deliverables. Your progress is saved on this device.
Data people depend on systems owned by other teams, and much of the job is negotiating for instrumentation, access, or a fix to a broken pipeline. Prepare an example of getting something changed upstream that you did not control. Describe what you asked for, what you traded, and how you worked while you waited.
Describe a situation where you had to convince non-technical senior ex…
Describe a situation where you had to convince non-technical senior executives to adopt a data-driven recommendation.
Approach
- Name the disagreement or constraint, and how you resolved it with evidence.
- State the situation in two sentences and spend the rest on your reasoning.
- Pick a story where you drove the decision, not one where you observed it.
Follow-up
- How did you know the outcome was caused by your change?
- What did you decide not to do, and why?
Quantify your own impact without claiming the topline you touched
You are writing the impact section of your own review. Over the year you ran four experiments, one of which shipped and three of which were flat; you corrected the definition of gross monthly revenue churn so that cancellation is recognised at period_end_utc; and you built a self-serve funnel dashboard. Weekly active accounts rose 14% over the same period. Your reviewer knows the data well. Write the three impact claims you would defend, stating for each what you contributed, what evidence supports it, and what portion of the outcome you are not claiming.
Approach
- Recognise what is being probed: whether you apply to your own work the causal standard you would apply to somebody else's roadmap claim. Nearly everyone who would reject 'accounts that do Y retain better' will write 'I drove a 14% increase' without noticing it is the same error with a friendlier subject.
- Sort the work by the kind of evidence it can carry. The shipped experiment is the only item with a randomised estimate, so it is the only one where an effect size is defensible, and you claim the interval rather than the point estimate.
- Claim the three flat experiments as decisions prevented and price them. Features not built, or built differently, on evidence, with the engineering weeks reallocated as the number somebody else can verify. A defensible null is a delivered decision and should be written as one.
- Claim the definition fix as correctness, not as improvement. The old figure was overstated by a specific percentage and appeared in a specific set of recurring documents; the impact is the change it produced in the forecast built on top of it, not a change in churn itself.
- Claim the dashboard on usage and displacement: distinct weekly users of it, and the ad-hoc request count for six months before against six months after. If the request log does not exist, record the claim as unverified rather than estimating it upward.
- Disclaim the 14% explicitly and once. State that it cannot be separated from seasonality, other teams' launches and a pricing change, and bound your own contribution from above using the shipped experiment's interval converted into headline units.
Follow-up
- Your shipped experiment's interval was +0.2pp to +1.4pp on activation. How much of the 14% can that account for, and how do you say so without undercutting yourself?
- A peer in the same cycle claims the full 14%. What, if anything, do you do about it?
- If you could only keep two of your three claims, which do you drop, and why that one?
Disagree with a product manager's roadmap claim using data
A product manager proposes building a feature on the argument that accounts connecting an integration in week one retain three times better at week four. The figure is correctly computed from dim_user and fct_event, and it has already been shown to leadership. You have one scheduled 1:1 before the roadmap locks. Deliver the specific analysis you would run to test whether the relationship is causal, the result that would change your own mind, and how you open the conversation so that the PM is not put in the position of defending the number in public.
Approach
- Recognise what is being probed: whether you can separate a number being right from an inference being wrong, and do it without costing the PM face. The generic answer recites that correlation is not causation; the strong one names the specific confound and proposes the cheapest design that could distinguish the explanations.
- State the alternative concretely. Accounts that connect an integration in week one are accounts that already have a workflow and a technical owner, so week-one intent plausibly drives both the connection and week-four retention. The selection is on intent, which no amount of post-hoc adjustment observes.
- Order the discriminating analyses by cost. First, condition on pre-connection activity by comparing retention within strata of week-one core-action count, which removes the crude version of the confound but not unobserved intent. Second, look for variation in integration availability that was unrelated to intent, such as a staggered release or an outage window. Third, an encouragement design that randomises a prompt to connect and reads the intent-to-treat effect on week-four retention, which is the only version that identifies an effect.
- Run the timing check, because it is nearly free and it is the most persuasive single piece of evidence. If the retention advantage among connectors is already visible before any of them connected, the causal story is largely finished.
- Pre-commit to what would change your mind and say it before you show anything: if the gap survives stratification and the encouragement arm moves week-four retention at all, the feature has a case and you will say so.
- Open the 1:1 by agreeing with the true part, that the correlation is real and worth chasing, then ask what effect size the roadmap plan assumes. That makes the size of the claim the topic instead of its authorship.
Follow-up
- The encouragement test needs six weeks and the roadmap locks in two. What do you recommend in the interim?
- Stratifying on week-one activity closes half the gap. What do you conclude, and what do you still not know?
- How would you word this in the roadmap document so the PM's original number is reframed rather than deleted?
- 01
Describe a situation where you had to convince non-technical senior executives to adopt a data-driven recommendation.
- 02
You are writing the impact section of your own review. Over the year you ran four experiments, one of which shipped and three of which were flat; you corrected the definition of gross monthly revenue churn so that cancellation is recognised at period_end_utc; and you built a self-serve funnel dashboard. Weekly active accounts rose 14% over the same period. Your reviewer knows the data well. Write the three impact claims you would defend, stating for each what you contributed, what evidence supports it, and what portion of the outcome you are not claiming.
- 03
A product manager proposes building a feature on the argument that accounts connecting an integration in week one retain three times better at week four. The figure is correctly computed from dim_user and fct_event, and it has already been shown to leadership. You have one scheduled 1:1 before the roadmap locks. Deliver the specific analysis you would run to test whether the relationship is causal, the result that would change your own mind, and how you open the conversation so that the PM is not put in the position of defending the number in public.
Is this an official McKinsey & interview guide?
No. It is PracHub's own research and practice material for the Data Scientist role at McKinsey &. Rounds and questions reflect what candidates have reported, not a process McKinsey & has published, and they change over time. Confirm the current format and scope with your recruiter.
PracHub interview research ↗How technical are the McKinsey Data Science interviews compared to pure tech companies?
The technical depth is comparable in foundational machine learning, SQL, and data structures, but the context is distinctly business-centric. You are evaluated as much on *why* you built a model and *how* you communicate its business impact as you are on algorithmic efficiency.
PracHub interview research ↗What is the primary difference between a McKinsey Data Scientist and a QuantumBlack Data Scientist?
QuantumBlack is McKinsey’s AI and advanced analytics center of excellence. Data Scientists within QuantumBlack focus heavily on deep technical machine learning assets, AI product development, and complex data engineering architecture, whereas non-QB McKinsey Data Scientists may focus more on rapid management analytics and domain-specific consulting cases. The core interview loop, however, shares significant overlap in PEI and case rigor.
PracHub interview research ↗How should I prepare for the Personal Experience Interview (PEI)?
Select 2 to 3 detailed, real-world examples for each major theme (Personal Impact, Inclusive Leadership, Entrepreneurial Drive, Conflict Management). Prepare to spend 20 to 30 minutes on a single story. Be ready to explain your exact thoughts, choices, personal contributions, and emotional management at each phase of the project.
PracHub interview research ↗Does McKinsey allow external AI tools during the assessment process?
No. McKinsey maintains strict rules regarding AI usage. Generative AI tools and external real-time coding assistance are strictly prohibited during online assessments and live pair-programming sessions.
PracHub interview research ↗Sources & methodology 3 sources ↗
No official company page is cited. Rounds and questions come from candidate reports and PracHub editorial material; each source shows the date it was read.
- 01PracHub interview research ↗
PracHub editorial research into this company and role, maintained with this guide. Candidate-reported, not an employer publication.
PracHub page · Accessed 2026-09-22 - 02PracHub Data Scientist practice ↗
Cross-company practice questions for this role.
PracHub page · Accessed 2026-09-22 - 03PracHub interview preparation framework ↗
The framework the preparation plan follows.
PracHub page · Accessed 2026-09-22
Explore related engineering environments and compare the preparation focus.
Fetch Rewards Data Scientist Interview Questions & Guide 2026
Product-sense practice for a Fetch Rewards data scientist interview: define a product and business analytics metric, pick its guardrails, and argue why a tempting alternative would mislead you.
1 digit technology Pvt Data Scientist Interview Questions & Guide 2026
Take-home style practice for data scientists preparing for 1 digit technology Pvt: a messy dataset, a fixed time budget, and a written analysis, reviewed for whether it states its assumptions and whether a reader could reproduce your number
xAI Data Scientist Interview Questions & Guide 2026
Communication practice for xAI data scientist candidates: turn an analysis into a recommendation, name the uncertainty honestly, and answer the follow-up a skeptical stakeholder will raise.
Windfall Data Scientist Interview Questions & Guide 2026
Data-quality drills for Windfall data scientist prep: survivorship and selection bias, leakage through time-ordered features, and extreme values where provenance decides the call. A logging fault or unit slip gets corrected or dropped; a ge