This guide covers what a Data Scientist at Meesho is expected to do and how to prepare for the interview.
Online Assessment
reportedMuch of what gets scored here happens out loud while you type. Nobody can see your reasoning inside a half-written query, so five silent minutes read as being stuck even when they are not. State the plan in plain language first: which tables, what grain you are aggregating to, and the one filter that defines the population. Then write it. The narration doubles as insurance, because a wrong plan gets caught early and cheaply while a wrong query gets caught at the end with no time left to redo it. A timed statistics section, where one exists, is a separate test with its own clock.
What to demonstrate
- Whether the query you write matches the plan you just described
- What you do with a hint, meaning whether the correction gets absorbed or the first approach gets defended
- Whether you can debug your own wrong output by reading the result set and naming which part of the query produced the anomaly
How to prepare
- Solve three problems while screen-sharing into a recording, then watch it back and mark every stretch longer than thirty seconds where you said nothing
- Practise compressing the plan into one sentence before typing, then check afterwards whether the finished query actually matched it
- Time yourself on statistics questions that carry a business reading, such as what a confidence interval does and does not claim, rather than re-reading notes without a clock
Recruiter Screen
reportedWhoever runs this call is usually not a practitioner. They take notes, and a hiring manager skims those notes later, so the real question is whether your work survives being written down by someone outside the field. Test every project sentence against that: could a non-specialist repeat it correctly without knowing what a propensity score is? Carry a plain-language version of each project and one reason you want this particular role that you could not copy onto another application. Vagueness at this stage reads as inexperience, even when the underlying work was genuinely deep.
What to demonstrate
- Whether a non-specialist can restate your projects accurately, since their paraphrase is what reaches the hiring manager
- Whether your reason for wanting the role points at the work itself rather than the company's reputation
- Whether your language signals the level being screened for: what you decided yourself versus what you were handed
How to prepare
- Write a two-sentence, jargon-free version of each major project: the question nobody could answer, and the decision your work changed. Read it to someone outside data and have them repeat it back
- Point your 'why this role' answer at something concrete in the job description or the product surface you would be working on, and keep it to two sentences
- Have two questions ready about measurement: which metric the team is held to, and who acts on an analysis once it lands
Technical Rounds
reportedA handful of shapes account for most of what gets asked in this format: a ranking or deduplication inside groups, a running or rolling total, a period-over-period comparison, and a cohort tracked forward over time. Recognising the shape quickly is most of the speed here; deriving it from scratch while a clock runs is where the time goes. Know that a window function keeps every row while a GROUP BY collapses them, and know which one the question needs. If the exercise is in Python instead of SQL, the same shapes arrive as groupby with transform, shift and merge, and the same grain mistakes are available.
What to demonstrate
- Whether you reach the right construct without a detour, such as ROW_NUMBER over a partition to deduplicate instead of a self-join against a MAX subquery
- Whether you know what your window frame actually is, since adding ORDER BY inside OVER changes the default frame and silently changes a running total
- Whether the thing runs. A near-miss that throws an error scores below a plainer query that returns the right rows.
How to prepare
- Write each of the four shapes once from memory against a small schema and keep the working version somewhere you will reread it: dedupe with ROW_NUMBER, a running total, a month-over-month change with LAG, and a retention table
- Compute one running total twice on data with tied timestamps, once on the default frame and once with ROWS BETWEEN UNBOUNDED PRECEDING AND CURRENT ROW, and look at where the two disagree
- If Python is on the table, rebuild the dedupe and the running total with groupby and cumsum, then assert the two implementations return identical rows
Case Study Discussion
reportedA case round is decided by whether you leave the interviewer with a recommendation, not by how much analysis you narrate on the way there. The prompt is open on purpose, so the first job is to convert it into a decision someone could act on: ask what would be done differently depending on the answer. From there name the quantity that would settle it, state the assumptions you need, and commit. Candidates who cover more ground than anyone expected and still end on "it depends" score below candidates who scoped narrowly and said what they would do.
What to demonstrate
- Whether the version of the question you choose to answer is genuinely narrower than the prompt and still worth answering
- Whether the recommendation arrives as an action with a number attached, rather than as a summary of what you looked at
- Whether assumptions are stated at the moment you rely on them, instead of collected into a disclaimer at the end
- Whether you notice when a branch you are exploring would not change the decision either way
How to prepare
- Take six open prompts and write only the scoping move for each: the one-sentence question you would actually answer and the decision it feeds. Give yourself three minutes per prompt and stop there.
- Put a five-minute warning into every practice case and force a closing statement that names the action, the result that would justify it, and the result that would reverse it.
- Record one case and count how long you talked before naming a measurable quantity. Past roughly five minutes, what you are calling scoping is narration.
PracHub editorial advice for the preparation topics above.
Reading a pooled rate that moved because the mix moved, not because any behaviour changed
A pooled conversion rate is a weighted average, and a shift in the weights can move it in the opposite direction to every one of its parts. A paid campaign that brings low-converting traffic drops overall signup conversion even if desktop, mobile web and app conversion each rose that week, which is Simpson's paradox and it is the single most common cause of an inexplicable dashboard move. The discipline is to decompose before explaining: recompute the rate holding last period's segment weights fixed, and compare that counterfactual to the actual, so the mix effect and the rate effect are separated numerically rather than argued about. Segment on the dimensions that actually reweight, which in this domain are almost always device_type, referrer_channel, country and new versus returning.
Watching an experiment daily and stopping when it crosses significance
A fixed-sample test controls type I error at one pre-declared look. Checking repeatedly and stopping at the first p < 0.05 inflates the false positive rate to roughly 0.15 to 0.20 for ten looks, and it rises further with more frequent checks, because the p-value takes a random walk that will eventually dip below the threshold under the null. The usual defences are a fixed horizon declared before launch, group-sequential boundaries such as O'Brien-Fleming that spend alpha across a planned number of looks, or always-valid confidence sequences that are correct under continuous monitoring. Compounding it, the effect size reported conditional on having crossed the threshold is biased away from zero, and the bias is larger the lower the power was, so an underpowered test that 'won' typically overstates the lift it found.
Optimising accuracy on a heavily imbalanced target
State the base rate first, then choose the metric from the relative cost of a false positive against a false negative: precision and recall at the operating threshold, PR-AUC, or expected cost. At a 1 percent positive rate, predicting the majority class for everyone scores 99 percent accuracy and is worthless.
Explaining an aggregate move without decomposing the mix shift
Split the change in the aggregate into within-segment movement and movement in segment weights before you explain it. Every segment's rate can fall while the overall rate rises, purely because volume shifted toward segments that already had higher rates.
Choose a category, try a prompt, then open its approach, worked solution or follow-up when you need it.
Explain the impact of regularization techniques on bias-variance trade…
Explain the impact of regularization techniques on bias-variance trade-offs.
Approach
- Quantify uncertainty explicitly rather than reporting a point estimate alone.
- Sanity-check the answer against a simple bound or a simulated case.
- Translate the result into the decision it informs, in one plain sentence.
Follow-up
- How would you explain this result to someone who does not know statistics?
- What sample size would you need to detect an effect half this size?
Describe the mechanics of bagging versus boosting in ensemble learning…
Describe the mechanics of bagging versus boosting in ensemble learning.
Approach
- Pick an evaluation metric that matches the cost of each error type, not a default.
- Frame the prediction: the label, the moment of prediction, and the action it triggers.
- Check what information would not exist at prediction time, and exclude it.
Follow-up
- How would you choose the decision threshold, and who owns that choice?
- What would you monitor after launch to know the model is still valid?
Implement seven-day activation from its written definition
Implement the seven-day activation rate. Inputs: dim_user with user_id, account_created_at_utc and is_internal; fct_event with user_id, occurred_at_utc and is_core_action. A user activates when core-action events carrying a non-NULL user_id fall on at least two distinct UTC dates inside [account_created_at_utc, account_created_at_utc + 7 days). The denominator is every non-internal user whose account_created_at_utc lands in the cohort week, including users with no events at all. Return one row per cohort week with numerator, denominator and rate, publishing only weeks whose last signup is at least eight days old.
Approach
- Build the denominator first, from dim_user alone, filtered on is_internal = False. Deriving it from the join is the standard way to lose every user who never fired an event, which is exactly the population the metric is about.
- Join events to users on user_id with a left join from the user side, then apply the window as a half-open interval: occurred_at >= created AND occurred_at < created + 7 days. The right bound is exclusive, so an event at exactly created + 7 days does not count.
- Count distinct UTC dates per user, not distinct events. Floor occurred_at_utc to date before the nunique, and do it in UTC rather than local time so the threshold does not move with the user's country.
- Apply the >= 2 threshold, aggregate to cohort week, and compute the rate by re-summing numerator and denominator per week rather than averaging any per-user or per-day rate. Fix the week anchor explicitly: cohort_week is the Monday of the signup week in UTC, which is what Postgres DATE_TRUNC('week') returns and what any SQL version of this metric will produce. In pandas, subtract dt.weekday days from the floored timestamp. If you reach for periods instead, the anchor that matches is to_period('W') (equivalently 'W-SUN'), whose weeks end Sunday and therefore start Monday; to_period('W-MON') labels weeks that end on Monday, so it runs Tuesday through Monday and its start_time is a Tuesday. Mixing the two shifts every cohort label by one day and silently moves Mondays into the previous week.
- Suppress immature weeks: drop any cohort week whose maximum account_created_at_utc is within 8 days of the data cut, and return them as absent rather than as a partial number.
Worked solution 30 min
- users = dim_user[~dim_user.is_internal].copy(); created = users['account_created_at_utc']; users['cohort_week'] = created.dt.floor('D') - pd.to_timedelta(created.dt.weekday, unit='D'), which is the Monday-start week. The period spelling that agrees with it is created.dt.to_period('W').dt.start_time; 'W-MON' does not agree and is off by a day.
- ev = events[events.is_core_action & events.user_id.notna()]; merge onto users on user_id with how='inner' for the numerator side only.
- Filter to the half-open window, add ev_date = occurred_at_utc.dt.date, group by user_id and count distinct dates, keep users with >= 2.
- numer = users.merge(activated_user_ids, how='left', indicator=True) then group by cohort_week and sum the indicator; denom = users.groupby('cohort_week').size().
- rate = numer / denom; drop weeks where users.groupby('cohort_week')['account_created_at_utc'].max() > data_max - 8 days.
Follow-up
- The threshold is 2 distinct days. What changes in the reported history if someone moves it to 3, and how would you publish that change?
- Invited seats and SSO-provisioned users have no pre-signup session. Should they be in this denominator at all, and what does including them do to the rate for sales-assisted accounts?
- How would you produce the same metric at account grain, and which of the two would you put on the dashboard?
Use SQL window functions (e.g., `PARTITION BY`, `RANK`) to perform coh…
Use SQL window functions (e.g., PARTITION BY, RANK) to perform cohort analysis.
Approach
- State the window function and its partition and ordering out loud before writing it.
- Say which table is the grain you start from, and join outward from it.
- Compute rates by summing numerator and denominator separately, never by averaging rates.
Follow-up
- How does the query change if the join becomes one-to-many?
- How would you verify this result without re-running the same query?
Explain the difference between a left anti-join and a semi-join in Spa…
Explain the difference between a left anti-join and a semi-join in Spark.
Approach
- Check whether any join is one-to-many before aggregating, or the sums inflate.
- Handle the rows that do not match: a LEFT JOIN with a NULL check is usually the question.
- Say which table is the grain you start from, and join outward from it.
Follow-up
- What breaks if events arrive late or out of order?
- How does the query change if the join becomes one-to-many?
Weekly visit-to-signup conversion split by acquisition channel
From fct_session (session_id, visitor_id, started_at_utc, referrer_channel, is_bot_flagged, consent_state) and fct_event (visitor_id, occurred_at_utc, event_name), compute visit-to-signup conversion for one ISO week, split by channel. session_id is the unique key of fct_session. Denominator: distinct visitor_id with a session starting in the week, is_bot_flagged = FALSE and consent_state <> 'denied'. Numerator: those visitors with a 'signup_completed' event in the same week. Label each visitor with the referrer_channel of their first session in the window. Return channel, visitors, signups and rate, plus one all-channel total row.
Approach
- Build a visitor spine that is one row per visitor: filter sessions to the week, drop is_bot_flagged and consent_state = 'denied', then take the first session per visitor with ROW_NUMBER() OVER (PARTITION BY visitor_id ORDER BY started_at_utc, session_id) = 1 to carry the channel label. Collapsing to one row here is what makes the channel buckets mutually exclusive and the totals additive.
- session_id is the unique key, so that ordering is total and the label is reproducible. If the table carried no unique key you would have to write an explicit tie rule instead, because two sessions on different channels at the identical timestamp would otherwise label the visitor differently between runs.
- Attach the outcome as a semi-join (EXISTS on a signup_completed event for that visitor inside the same week) rather than a join to the event table, so a visitor who fires the event twice does not count twice and inflate the numerator past the denominator.
- Aggregate with COUNT() as visitors and COUNT() FILTER (WHERE signed_up) as signups, and compute the rate as signups::numeric / NULLIF(visitors, 0) so an empty channel returns NULL rather than a division error.
- Produce the total with GROUP BY GROUPING SETS ((channel), ()), which re-sums numerator and denominator for the total row. Averaging the channel rates gives a different and wrong number whenever channel volumes differ, which they always do.
- Verify the spine before trusting the output: COUNT(*) must equal COUNT(DISTINCT visitor_id), and the per-channel visitor counts must sum to the total row.
Worked solution 20 min
- Write the filtered session CTE and check its row count against an unfiltered count, so you know how much volume the bot and consent filters removed.
- Add the ROW_NUMBER first-session pick and assert one row per visitor.
- Add the EXISTS outcome flag and aggregate with FILTER.
- Add GROUPING SETS for the total and format the rate to four decimal places.
- Spot-check one channel by hand: pull its visitor list, count signups directly, compare.
Follow-up
- The denominator is distinct visitors. If a browser release shortens cookie lifetime, what happens to this rate, and how would you tell that apart from a genuine drop?
- A visitor's first session is direct and their signup session is paid search. Your label says direct. When is that the wrong answer for the decision being made?
- How do you roll four weeks into a month, and why is averaging the four weekly rates wrong?
Implement a solution using Dynamic Programming to optimize a recursive…
Implement a solution using Dynamic Programming to optimize a recursive approach.
Approach
- Decompose the metric into the rates that drive it, and say which one you would check first.
- Restate the decision this analysis has to support, and who acts on the answer.
- Name one primary metric, then the guardrail that stops it being gamed.
Follow-up
- How would you detect that the metric is being gamed rather than genuinely improving?
- What would you do if the primary metric and the guardrail moved in opposite directions?
Explain how to diagnose a sudden drop in a core product metric.
Explain how to diagnose a sudden drop in a core product metric.
Approach
- Fix the population and the time window before naming any metric.
- Name one primary metric, then the guardrail that stops it being gamed.
- State what result would change your recommendation, so the answer is falsifiable.
Follow-up
- How would you detect that the metric is being gamed rather than genuinely improving?
- What would you do if the primary metric and the guardrail moved in opposite directions?
Discuss time and space complexity trade-offs for your chosen data stru…
Discuss time and space complexity trade-offs for your chosen data structures.
Approach
- Name one primary metric, then the guardrail that stops it being gamed.
- Restate the decision this analysis has to support, and who acts on the answer.
- State what result would change your recommendation, so the answer is falsifiable.
Follow-up
- What would you do if the primary metric and the guardrail moved in opposite directions?
- How would you detect that the metric is being gamed rather than genuinely improving?
Given a product scenario, design the metrics to track for a new featur…
Given a product scenario, design the metrics to track for a new feature launch.
Approach
- Decompose the metric into the rates that drive it, and say which one you would check first.
- Fix the population and the time window before naming any metric.
- Name one primary metric, then the guardrail that stops it being gamed.
Follow-up
- How would you detect that the metric is being gamed rather than genuinely improving?
- Which segment would you cut first, and what would that rule out?
What are the common pitfalls in A/B testing, such as novelty effects o…
What are the common pitfalls in A/B testing, such as novelty effects or interference?
Approach
- Decide the analysis before seeing data, including how long it runs and when you look.
- Say whether units interfere with each other, and switch design if they do.
- Name the guardrails that would stop a launch even on a positive primary result.
Follow-up
- What would you conclude if the result is positive but the test is underpowered?
- How would you handle interference between treated and control units?
How do you determine if a result is statistically significant?
How do you determine if a result is statistically significant?
Approach
- Name the guardrails that would stop a launch even on a positive primary result.
- Decide the analysis before seeing data, including how long it runs and when you look.
- Name the randomisation unit first; it decides the variance and what the test can detect.
Follow-up
- What would you do if you could not randomise at all?
- How would you handle interference between treated and control units?
Solve a triplet sum problem using an optimal pointer approach rather t…
Solve a triplet sum problem using an optimal pointer approach rather than a hash map.
Approach
- Work from the decision backwards to the evidence you would need.
- State your assumptions explicitly before working the problem.
- Clarify what is being asked and what a complete answer would contain.
Follow-up
- How would you know your answer was wrong?
- What assumption would you test first?
Measure whether self-serve help actually answered the question
A help widget opens in-product. Leadership asks for the percentage of users who got their answer. You have fct_event (event_name, user_id, session_id, occurred_at_utc, is_core_action, properties JSONB carrying article_id), fct_session, and a support ticket table joined on user_id. Nothing records whether the answer was correct or whether the user was satisfied, and no such field is being added. Propose the metric you would publish, state the proxy plainly, name the direction and rough size of its bias, and say which decisions it can and cannot support. Deliverable: the definition plus the bias statement.
Approach
- Say first that the target quantity is unobserved and will stay unobserved: nothing in the stream distinguishes a user who was helped from one who gave up, and both leave the same trace, so every candidate metric here is a proxy and the only question is which bias you prefer.
- Build the proxy to remove the largest identifiable error: among widget-open sessions, the share with no ticket from that user within 72 hours and at least one is_core_action = TRUE event after the widget opened in the same session. The downstream action requirement strips out most of the silent abandonment that a no-ticket rule alone scores as success.
- State the residual bias with a direction and a bound: it still over-counts, because a user who gave up and went elsewhere files no ticket and may still complete an unrelated core action later in the session; bound it using the observable population of widget-open sessions that end within two minutes with no further event.
- Publish a directly-measured companion with its own weakness in the same sentence: article thumbs up/down reported with its response rate, and the note that a single-digit response rate missing non-randomly toward annoyed users is exactly why it cannot be the headline.
- Write the use statement, because a proxy without one gets reused for the wrong decision: valid for ranking articles against each other and for detecting a week-on-week break, invalid as an absolute deflection rate or as an input to a cost-saved figure.
Worked solution 25 min
- Write the unobservable target in one sentence with the observable set beside it, so the gap is visible on the page rather than assumed away.
- Define the published proxy with exact numerator and denominator, including the session scoping of the downstream core action.
- Bound the bias from data you already have: compute the share of widget-open sessions ending within two minutes with no further event.
- Publish the thumbs signal beside it with its response rate and the direction of its missingness.
- Write the two-line use statement covering what the number supports and what it does not.
Follow-up
- How would you validate this proxy once, and what would you do if the validation said it over-counts by 20 points?
- Support asks for a dollars-saved number from this metric. What do you say, and what would you need before saying anything else?
- Ticket volume drops the week support hours change. How do you keep that out of the series?
Gross revenue churn doubled with no cancellations behind it
Gross monthly revenue churn computed from fct_subscription_period doubled from 1.8% to 3.6% in one month. The support queue shows no rise in cancellations and renewals look normal. You have fct_subscription_period with subscription_id, account_id, period_start_utc, period_end_utc, mrr_cents, mrr_cents_constant_fx, seats_billed, period_status, change_reason and canceled_at_utc, plus dim_account. Decompose the 1.8-point rise into named mechanisms, size each in points of the headline, and state the remainder you cannot explain.
Approach
- Reconstruct the numerator row by row and group it by change_reason before arguing about causes. A mid-period plan or seat change closes the current period row and opens a new one, so any implementation that treats a closed row as lost revenue books upgrades, downgrades and seat changes as churn; the change_reason breakdown of the numerator makes that visible in one query.
- Check the recognition timestamp. Churn belongs at period_end_utc, because revenue continues until the period ends, not at canceled_at_utc when the button was pressed. Then count period_end_utc rows per month across thirteen months: annual cohorts concentrate their period ends in the month twelve months after they were signed, so a spike that repeats in the same month last year is seasonality in the book, not an event this month.
- Recompute the whole numerator and denominator on mrr_cents_constant_fx. If the constant-currency figure is materially flatter, the move is an exchange-rate translation and belongs nowhere in a churn narrative.
- Check period_status handling. Rows with period_status = 'past_due' are dunning, not cancellation; a status-based rule counts them as loss while a period-end rule does not, and a dunning backlog can move the number by itself.
- Express every mechanism in points of the headline, sum them, and print the residual explicitly next to the month-to-month standard deviation of the prior twelve months. A decomposition without a stated remainder is a story, not an accounting.
Follow-up
- Which of these mechanisms should be fixed in the metric definition and which should be reported as a genuine business fact?
- How would you present a month whose churn is dominated by an annual cohort anniversary without the audience concluding the business is deteriorating?
- What would you change so that an upgrade can never enter the churn numerator again, and how would you test that it worked?
For a candidate whose interviews will centre on A/B testing, metric movement and causal claims. Design comes before arithmetic, arithmetic before analysis, and the week ends by rehearsing the readout rather than the derivation.
Prepare, practise & reflect
One practical outcome each day. Spend longer where you need it.
0 / 7 done01Design one test end to end on paper
- Take a single feature change and write the full design: randomization unit, the exact point of exposure, the primary metric with its grain, guardrails, allocation, planned duration, and the decision rule committed before any data exists.
- Write why the randomization unit must sit at or above the level where treatment can spill over, and give one case where user-level randomization is still contaminated (shared accounts or devices, or two participants in the same marketplace).
- State in advance what you will do if the primary metric is flat while a secondary metric is significant.
Deliverable: A one-page test design with a decision rule written before launch.
Practice prompt ↗Practice prompt ↗Practice prompt ↗Worked solution ↗02Power arithmetic until it is automatic
- Compute required sample size per arm for a binary metric with the normal approximation, n is approximately 2 times (z for alpha/2 plus z for power) squared times p(1 minus p) divided by delta squared, for baselines of 2, 10 and 40 percent at a 5 percent relative lift, and note that for a fixed relative lift the requirement falls as the baseline rises because delta grows proportionally with p.
- Redo the calculation for a continuous metric using variance in place of p(1 minus p), and show why a heavy-tailed quantity such as revenue per user needs either far more traffic or a capped version with a stated cap.
- Convert one of the results into weeks given a weekly eligible traffic figure, then list the two honest ways to shorten it (accept a larger detectable effect, or reduce variance) and write why quietly lowering the power target is a decision to miss more real wins, not a speedup.
Deliverable: A small script or sheet that maps baseline, minimum detectable effect, alpha and power to sample size and weeks, cross-checked against a published calculator.
Practice prompt ↗Practice prompt ↗Practice prompt ↗03Variance and the unit-of-analysis problem
- Take a ratio metric whose denominator is not the randomization unit (clicks per session, randomized by user) and compute the standard error twice, once naively at session level and once by the delta method or a user-level bootstrap, then record how much the naive version understates it.
- Implement CUPED on simulated data: choose a pre-period covariate X measured before assignment, estimate theta as Cov(Y, X) divided by Var(X), and analyse Y minus theta times (X minus its mean) in place of Y. Confirm the variance of the adjusted outcome equals the raw variance multiplied by one minus the squared correlation between Y and X, so a correlation of 0.45 removes about 20 percent of the variance and not 80.
- Now run that simulation a few hundred times and confirm the adjusted effect estimate is unbiased for the same effect rather than numerically identical to the raw one. Within any single run the two differ, sometimes by a large fraction of the true effect, because the two arms' pre-period covariate means never coincide exactly in a finite sample; they agree in expectation, which is the property that matters and the one to state out loud.
Deliverable: A notebook showing the adjusted estimator with a measurably smaller variance than the raw one, plus a repeated-simulation table showing the two estimators agreeing on average while differing run by run.
Practice prompt ↗Practice prompt ↗Practice prompt ↗04Validity threats you can actually test for
- Run a sample ratio mismatch check as a chi-square goodness-of-fit test against the intended allocation, and write the three causes you would chase first (assignment logged before exposure, an arm-specific redirect or load failure, bot filtering applied asymmetrically).
- Simulate peeking: generate A/A data, test daily at alpha 0.05 across 14 looks, record the inflated false positive rate, then apply an alpha-spending boundary or commit to a fixed horizon and confirm the rate returns to nominal.
- Write how you would separate a novelty effect from a durable lift using the treatment effect plotted against days since first exposure, and what shape would change your recommendation.
Deliverable: One table showing the peeking false positive rate before and after correction, plus a written SRM triage list.
Practice prompt ↗Practice prompt ↗Practice prompt ↗Worked solution ↗05When randomization is not available
- Write the identifying assumption for difference-in-differences (parallel trends in the absence of treatment), then plot pre-period trends for two candidate control groups and justify rejecting one of them.
- Design a switchback test for a change where user-level randomization would leak across participants, choosing a time-block length against the carryover you expect and saying how you would detect carryover in the data.
- List what an interrupted time series or a synthetic control buys you and the one thing neither can rule out: an unobserved shock that coincides with the launch.
Deliverable: A one-page memo recommending a single quasi-experimental design and naming its weakest assumption explicitly.
Practice prompt ↗Practice prompt ↗06The readout query
- Write the assignment-to-exposure join that returns exactly one row per unit per experiment, and handle units appearing in both arms by excluding and counting them rather than silently keeping one.
- Compute the per-arm metric, its variance and the relative lift with a confidence interval in SQL, then reproduce the identical numbers in a notebook as a cross-check.
- Add a segment breakdown and write the sentence that keeps it from being p-hacking: segments declared in advance, everything else reported as exploratory and corrected for multiplicity.
Deliverable: A single query that outputs the full readout table, matched to a notebook recomputation.
Practice prompt ↗Practice prompt ↗07Present it to someone who will not read the appendix
- Give a 10-minute readout of a real or simulated experiment in the order decision, number, uncertainty, caveat.
- Have your listener ask "can we ship it" in the case where the primary is flat and a guardrail moved, and answer with a recommendation rather than a request for more data.
- Rewrite your opening line so the recommendation lands before any methodology.
Deliverable: A one-page readout whose first line is the recommendation.
Practice prompt ↗Practice prompt ↗Worked solution ↗Expand any day for tasks and deliverables. Your progress is saved on this device.
Nearly every data role forces a trade between the analysis you want and the one that fits the decision window. Prepare a case where you deliberately shipped something less rigorous, named the weakness to the person relying on it, and said what would change your answer. The naming is the part interviewers listen for.
How do you handle lazy execution in PySpark when optimizing data pipel…
How do you handle lazy execution in PySpark when optimizing data pipelines?
Approach
- Pick a story where you drove the decision, not one where you observed it.
- Quantify the outcome, including what you would not claim credit for.
- Close with what you would do differently, concretely.
Follow-up
- How did you know the outcome was caused by your change?
- What would you do differently if you ran that project again?
Walk through an analysis you got wrong and what changed
Describe an analysis of yours that turned out to be wrong after somebody had already acted on it. You have four minutes. The account must name the defect mechanically, the join, the filter, the window or the identity key, rather than describing it as a communication problem. It must also say who did what because of the wrong number, how the error surfaced, how long it stood, and what control you put in place so that class of error cannot reach a decision again. Do not pick an error nobody acted on.
Approach
- Recognise what is being probed: whether you can be specific about your own failure without minimising it or performing contrition. The discriminator is whether the defect has a mechanism the listener could reproduce in their own warehouse.
- Choose the case by blast radius rather than by comfort. An error nobody acted on tests nothing, and picking one signals that you are managing the interview instead of answering it.
- Structure the account in six beats: the number, the decision it drove, the defect, the detection, the correction, the control. Keep the defect to one reproducible sentence, for example an inner join to fct_subscription_period that dropped accounts with no subscription row and so computed retention over payers only.
- State the direction of the bias, not only its existence. A filter or join that removes rows usually moves a metric predictably, and knowing which way shows you diagnosed the mechanism rather than patched the symptom.
- Be exact about detection and elapsed time. 'A colleague noticed' and 'the row-count assertion failed before publication' are different answers about the same organisation, and the second one is the one your control is supposed to produce next time.
- End on the control, its cost, whether it has fired since, and one thing it does not cover.
Follow-up
- What did the control cost, and has it fired since? If it never has, how do you know it works?
- How long did the wrong number stand before anyone questioned it, and what does that say about the review path it went through?
- What is the equivalent mistake you are most likely to make in this role, given the tables you would be working in?
Quantify your own impact without claiming the topline you touched
You are writing the impact section of your own review. Over the year you ran four experiments, one of which shipped and three of which were flat; you corrected the definition of gross monthly revenue churn so that cancellation is recognised at period_end_utc; and you built a self-serve funnel dashboard. Weekly active accounts rose 14% over the same period. Your reviewer knows the data well. Write the three impact claims you would defend, stating for each what you contributed, what evidence supports it, and what portion of the outcome you are not claiming.
Approach
- Recognise what is being probed: whether you apply to your own work the causal standard you would apply to somebody else's roadmap claim. Nearly everyone who would reject 'accounts that do Y retain better' will write 'I drove a 14% increase' without noticing it is the same error with a friendlier subject.
- Sort the work by the kind of evidence it can carry. The shipped experiment is the only item with a randomised estimate, so it is the only one where an effect size is defensible, and you claim the interval rather than the point estimate.
- Claim the three flat experiments as decisions prevented and price them. Features not built, or built differently, on evidence, with the engineering weeks reallocated as the number somebody else can verify. A defensible null is a delivered decision and should be written as one.
- Claim the definition fix as correctness, not as improvement. The old figure was overstated by a specific percentage and appeared in a specific set of recurring documents; the impact is the change it produced in the forecast built on top of it, not a change in churn itself.
- Claim the dashboard on usage and displacement: distinct weekly users of it, and the ad-hoc request count for six months before against six months after. If the request log does not exist, record the claim as unverified rather than estimating it upward.
- Disclaim the 14% explicitly and once. State that it cannot be separated from seasonality, other teams' launches and a pricing change, and bound your own contribution from above using the shipped experiment's interval converted into headline units.
Follow-up
- Your shipped experiment's interval was +0.2pp to +1.4pp on activation. How much of the 14% can that account for, and how do you say so without undercutting yourself?
- A peer in the same cycle claims the full 14%. What, if anything, do you do about it?
- If you could only keep two of your three claims, which do you drop, and why that one?
- 01
How do you handle lazy execution in PySpark when optimizing data pipelines?
- 02
Describe an analysis of yours that turned out to be wrong after somebody had already acted on it. You have four minutes. The account must name the defect mechanically, the join, the filter, the window or the identity key, rather than describing it as a communication problem. It must also say who did what because of the wrong number, how the error surfaced, how long it stood, and what control you put in place so that class of error cannot reach a decision again. Do not pick an error nobody acted on.
- 03
You are writing the impact section of your own review. Over the year you ran four experiments, one of which shipped and three of which were flat; you corrected the definition of gross monthly revenue churn so that cancellation is recognised at period_end_utc; and you built a self-serve funnel dashboard. Weekly active accounts rose 14% over the same period. Your reviewer knows the data well. Write the three impact claims you would defend, stating for each what you contributed, what evidence supports it, and what portion of the outcome you are not claiming.
Is this an official Meesho interview guide?
No. It is PracHub's own research and practice material for the Data Scientist role at Meesho. Rounds and questions reflect what candidates have reported, not a process Meesho has published, and they change over time. Confirm the current format and scope with your recruiter.
PracHub interview research ↗How difficult are the coding rounds at Meesho?
They are generally considered challenging. You should be comfortable with LeetCode medium to hard problems, specifically focusing on arrays, strings, and graph algorithms.
PracHub interview research ↗Is there a specific focus on deep learning?
Yes, if your resume highlights deep learning, you will be probed on architecture internals, such as how Transformers or RNNs function at a mathematical level.
PracHub interview research ↗What is the best way to prepare for the case study round?
Practice end-to-end thinking. Start by defining the business goal, then determine the metrics, choose the model, discuss the data requirements, and finally, address potential pitfalls like data leakage or bias.
PracHub interview research ↗Sources & methodology 3 sources ↗
No official company page is cited. Rounds and questions come from candidate reports and PracHub editorial material; each source shows the date it was read.
- 01PracHub interview research ↗
PracHub editorial research into this company and role, maintained with this guide. Candidate-reported, not an employer publication.
PracHub page · Accessed 2026-09-22 - 02PracHub Data Scientist practice ↗
Cross-company practice questions for this role.
PracHub page · Accessed 2026-09-22 - 03PracHub interview preparation framework ↗
The framework the preparation plan follows.
PracHub page · Accessed 2026-09-22
Explore related engineering environments and compare the preparation focus.
Fetch Rewards Data Scientist Interview Questions & Guide 2026
Product-sense practice for a Fetch Rewards data scientist interview: define a product and business analytics metric, pick its guardrails, and argue why a tempting alternative would mislead you.
1 digit technology Pvt Data Scientist Interview Questions & Guide 2026
Take-home style practice for data scientists preparing for 1 digit technology Pvt: a messy dataset, a fixed time budget, and a written analysis, reviewed for whether it states its assumptions and whether a reader could reproduce your number
xAI Data Scientist Interview Questions & Guide 2026
Communication practice for xAI data scientist candidates: turn an analysis into a recommendation, name the uncertainty honestly, and answer the follow-up a skeptical stakeholder will raise.
Windfall Data Scientist Interview Questions & Guide 2026
Data-quality drills for Windfall data scientist prep: survivorship and selection bias, leakage through time-ordered features, and extreme values where provenance decides the call. A logging fault or unit slip gets corrected or dropped; a ge