Metro Vancouver · Software Engineer
Updated · 2026-09-24

Metro Vancouver Software Engineer
Interview Questions & Guide 2026

THE 60-SECOND BRIEF

As a Software Engineer at Metro Vancouver, you are at the intersection of critical regional infrastructure and advanced technological systems. Your work directly impacts the essential services—such as water treatment, wastewater management, and hydraulic systems—that sustain the region’s millions of residents. You are not merely writing code; you are building the digital backbone for industrial-grade systems that require the highest levels of reliability, safety, and precision.

The behavioural round is a technical round in narrative form. Prepare it by collecting specifics you actually owned, such as a design you argued against, an incident you diagnosed, or a decision you later reversed, rather than by rehearsing phrasing.

Metro Vancouver candidates report 2 rounds · ≈ 2-4 weeks. The stages below are what candidates describe, not a published process.

Bound every outbound call with a timeoutMake every write idempotent under retryDetect concurrent edits instead of losing writes

33 min read

Browse Software Engineer questions

See the practice prompts

13Practice promptsAcross five skill areas
3With worked solutionsIncluded in the practice prompts

As a Software Engineer at Metro Vancouver, you are at the intersection of critical regional infrastructure and advanced technological systems. Your work directly impacts the essential services—such as water treatment, wastewater management, and hydraulic systems—that sustain the region’s millions of residents. You are not merely writing code; you are building the digital backbone for industrial-grade systems that require the highest levels of reliability, safety, and precision.

This role is inherently multidisciplinary. You will collaborate with specialized engineers in electrical, mechanical, and civil disciplines to integrate software solutions into physical infrastructure. Whether you are working on the North Shore Wastewater Treatment Plant or developing sophisticated Hydraulic Modelling software, you will face challenges defined by complex systems integration, long-term sustainability, and high-stakes operational requirements.

Expect a professional environment where technical rigor is balanced with a focus on public service. Your contributions will influence how manages its assets, optimizes maintenance cycles, and ensures the environmental integrity of the region. This is a role for engineers who thrive on solving tangible, high-impact problems that extend far beyond the screen.

01

Initial Screening

reported

The title covers product work, platform work, infrastructure, mobile and frontend, and those are different jobs with different loops behind them. A screening call is the cheapest place to find out which one the seat is, and asking reads as experienced rather than fussy. The questions that separate them: what the team is on call for, what the last three projects were, and whether any round happens inside an existing repository instead of a blank file. Then say which of that you have done and which you have not. Claiming the whole posting is the fastest way to be found out one round later.

What to demonstrate

  • Whether you can locate your experience inside one flavour of the role honestly instead of claiming the entire requirements list
  • Whether you name what you have not done, which an experienced screener reads as a level signal and can plan the loop around
  • Whether what you want next matches what the seat is: someone who wants greenfield work landing on a team that mostly operates an existing system is a hire that leaves within the year

How to prepare

  • Mark every line of the posting as done, adjacent or new, and write one sentence for each adjacent line naming the closest thing you actually built
  • Split your last two years into rough percentages across feature work, operating and debugging live systems, and design or review, so a question about scope gets numbers rather than adjectives
  • Bring three questions that discriminate between seats: what the team is paged for, how much of the work is changing existing code versus standing up something new, and what shipped in the last quarter
PracHub interview research ↗
02

Technical Interviews

reported

What this round decides is narrow: whether you can produce code that runs and is correct on inputs nobody showed you. An elegant solution that does not compile scores below a plain one that does, so write a correct brute force first, say out loud that you know its cost, and improve it with the working version still on screen. What separates strong answers is who finds the broken case. Trace your own code against an empty input, a single element, and duplicate keys before you say you are finished, because being told is far more expensive than noticing.

What to demonstrate

  • Whether degenerate inputs get checked without being asked for: an empty collection, one element, every element equal, and the extreme value the input type allows
  • Whether the complexity you state matches the code you actually wrote, including a sort or a copy sitting inside a loop
  • Whether the finished answer is verified against the worked examples before you call it done, rather than assumed correct because the code reads correctly

How to prepare

  • Take five problems you have already solved and, without running anything, write down what each returns for empty input, a single element, and all-duplicates. Then run them and count how many you predicted wrong.
  • Drill the brute force as its own skill: on ten problems, write only the obviously-correct slow version and time how long it takes to get it passing. If that is more than a few minutes, that is what to practise, not the optimal version.
  • Add a fixed last step before you submit anything, reading only the loop bounds and the initial value of each accumulator, which is where most off-by-one errors live
PracHub interview research ↗

PracHub editorial advice for the preparation topics above.

01

Running a schema change as though the lock lasts as long as the statement

In PostgreSQL an ALTER TABLE that needs an ACCESS EXCLUSIVE lock must first wait for every open transaction touching that table, and while it waits, later queries needing a conflicting lock queue behind it rather than overtaking it. A DDL statement that would execute in milliseconds, issued while a thirty-second analytics query is open, therefore stalls all traffic on that table for thirty seconds: the outage length is set by the longest open transaction, not by the change. The defences are specific and worth knowing by name - set lock_timeout low and retry rather than queue, add columns without a volatile default so no table rewrite occurs (from version 11 a non-volatile default is a metadata-only change), build indexes with CREATE INDEX CONCURRENTLY while accepting that it cannot run inside a transaction block and leaves an invalid index behind if it fails, and add constraints as NOT VALID followed by a separate VALIDATE CONSTRAINT, which takes a weaker lock.

02

Shipping a migration and the code that depends on it as a single change

During any rolling deploy, and for as long as a rollback remains possible, old and new code execute against the same schema at the same time. A migration that drops or renames a column breaks every instance that has not restarted yet, and code that requires a column the migration has not applied breaks every instance that restarted early. The discipline is expand then contract: add the new column nullable, write both shapes, backfill in batches, move reads across once the backfill is verified, and only then stop writing the old shape and drop it - four deploys, usually spread over days. It feels disproportionate until the first rollback, at which point it is the only reason the previous version still runs.

03

Never running a concrete value through the code

Trace one small input and one edge input by hand, index by index, out loud. Re-reading your own code catches design mistakes; walking a real value through it catches the off-by-one, the uninitialised accumulator and the loop that never advances.

04

Optimising an axis nobody named

Ask which resource is actually scarce here: wall-clock latency, throughput, memory footprint, cost per request, or engineering time. Shaving a constant factor off an in-memory step is wasted effort when the same function makes a blocking remote call inside the loop.

Choose a category, try a prompt, then open its approach, worked solution or follow-up when you need it.

10 technical prompts3 include a worked solution

How do you balance the need for innovative software features with the …

medium
data structures and algorithms

How do you balance the need for innovative software features with the rigid requirements of infrastructure stability?

Approach
  1. Walk one small example through your approach before writing the whole thing.
  2. Choose the data structure from the access pattern, not from familiarity.
  3. State the target complexity and say which constraint rules the naive version out.
Follow-up
  • Which test case would catch an off-by-one here?
  • How does this change if the input no longer fits in memory?

Tell us about a project where you had to collaborate with non-software…

medium
data structures and algorithms

Tell us about a project where you had to collaborate with non-software disciplines to achieve a goal.

Approach
  1. State the target complexity and say which constraint rules the naive version out.
  2. Walk one small example through your approach before writing the whole thing.
  3. Restate the input: its shape, its size, and what is guaranteed about it.
Follow-up
  • What is the worst case, and how likely is it on real data?
  • Which test case would catch an off-by-one here?

Describe your approach to documenting technical systems for long-term …

medium
data structures and algorithms

Describe your approach to documenting technical systems for long-term maintenance by other teams.

Approach
  1. Walk one small example through your approach before writing the whole thing.
  2. State the target complexity and say which constraint rules the naive version out.
  3. Name the brute-force solution and its complexity before improving on it.
Follow-up
  • How does this change if the input no longer fits in memory?
  • Which test case would catch an off-by-one here?

Merge partitioned event streams into one ordered feed with bounded lateness

hardWorked solution
k-way mergewatermarksout-of-order streams

The read-model service consumes 64 log partitions carrying about 4,000 events per second in total. Each partition is ordered within itself, but partitions drift by up to 30 seconds, and the activity feed must present a tenant's events in occurred_at order. Produce the merge. State its complexity, the buffer it requires in events and in bytes, what happens when one partition is idle, and what you do with an event that arrives after you have already emitted its position. Payloads average 1 KB.

Approach
  1. Merge with a min-heap over the 64 partition heads keyed on (occurred_at, event_id): O(log P) per event and O(n log P) overall. The tie-break on event_id is what makes the output deterministic when two partitions carry the same millisecond, which matters because the feed is paginated and a non-deterministic order reorders pages under the reader.
  2. Emitting the heap head is only correct once every partition has produced everything up to that timestamp, so the emit condition is a watermark: the minimum across partitions of the highest occurred_at seen, less the allowed lateness. Events are held until the watermark passes them, which is what turns individually ordered streams into a jointly ordered one.
  3. Size the buffer from the lateness rather than guessing: 4,000 events per second times 30 seconds is 120,000 buffered events, and at 1 KB each about 120 MB of heap. That number is the real price of the ordering guarantee and belongs in front of whoever asked for it.
  4. Handle the idle partition explicitly, because it fails the feed rather than corrupting it: a partition with no traffic never advances its own maximum, so the watermark freezes and output stops entirely. Either every partition emits a periodic idle marker carrying the broker's current time, or the watermark falls back to wall clock for a partition silent beyond a threshold.
  5. Choose the late-event policy from what the projection is keyed on. The projection upserts on (aggregate_id, aggregate_version) and discards a version it has already applied, so a late event is safe to apply out of order and correctness never depended on the merge at all. Apply it, recompute the affected feed page, and count lateness so the 30-second budget can be re-derived from data rather than folklore.
  6. Say what the merge does not buy: ordering is guaranteed within one aggregate by the log's partitioning, and no watermark makes the cross-aggregate order authoritative. Two events from different aggregates in the same millisecond have no true order, so the feed's order is a presentation choice that must be stable rather than correct.
Worked solution 35 min
  1. Write the heap comparator on (occurred_at, event_id) and the per-partition head refill.
  2. Write the watermark computation and the emit-loop condition, then list which buffered events are held at a chosen instant.
  3. Compute the buffer at 4,000 events per second, 30 seconds and 1 KB per event, and state what fraction of a worker's heap that represents.
  4. Add the idle-partition marker and trace the watermark with one silent partition, both with and without the marker.
  5. Write the late-event path and name the key that makes applying it safe.
EXPECTED RESULTA 64-way min-heap merge at O(n log P) with a deterministic (occurred_at, event_id) comparator, a watermark of the per-partition minimum less 30 seconds gating emission, a stated buffer of 120,000 events and roughly 120 MB, idle markers so a silent partition cannot freeze the watermark, and a late-event policy justified by the projection's idempotency on (aggregate_id, aggregate_version).
Follow-up
  • The lateness budget is raised to five minutes. What is the new buffer, and what besides memory changes?
  • The consumer restarts. Where does it resume from, and what does the feed look like for the first 30 seconds?
  • One partition is ten minutes behind because its producer is slow. Do you stall the feed or emit without it?

For a candidate senior enough that the loop turns on design and judgement rather than on whether the coding round gets finished. Five days build one system properly and then stress it; coding gets a single maintenance day, on the assumption that the risk at this level is an unexamined tradeoff rather than a missed algorithm.

Small steps. Visible outcomes.0 / 7 completed
ONE WEEK · YOUR PACE

Prepare, practise & reflect

One practical outcome each day. Spend longer where you need it.

0 / 7 done
01Numbers before diagrams
  • Build your own reference card of the figures you will re-derive all week: bytes for a realistic record, requests per second implied by a given daily active count, and the storage that a year at a given write rate produces. Derive each one rather than copying it, because the derivation is what survives a follow-up.
  • Turn one product statement into capacity requirements. From ten million daily users at four writes and forty reads each, state the peak-to-average factor you are assuming and why, then produce peak write QPS, peak read QPS and a year of storage.
  • Write the two numbers whose order of magnitude changes the design, the read-to-write ratio and the working-set size against memory per node, and state the threshold at which each one flips your answer.

Deliverable: A one-page numbers card and one worked capacity estimate with every assumption written down.

Practice prompt ↗Practice prompt ↗Worked solution ↗
02One system, from requirements to schema
  • Spend the first ten minutes producing only functional requirements, non-functional targets with numbers attached, a p99 latency, a durability expectation, a consistency requirement, and an explicit out-of-scope list.
  • Define the interface before the boxes: the three or four endpoints, their parameters, what each returns, and which of them are idempotent.
  • Write the data model, then write the single access pattern that justifies it, and state what the schema would have to become if the dominant access pattern were the other one.

Deliverable: One design carried to endpoint-and-schema depth, with non-functional targets expressed as numbers and a written out-of-scope list.

Practice prompt ↗Practice prompt ↗
03The consistency you are actually buying
  • Write out what a client sees under asynchronous replication when its write commits on the leader and its next read is served by a lagging follower, then write the two fixes, pinning that session's reads to the leader for a bounded window or carrying a version token the replica must reach, and the cost of each.
  • Work the quorum arithmetic on paper for N of three with W and R of two, and separate what R + W > N does guarantee, that any read set intersects any write set, from what it does not: on its own it is not linearizability, and a sloppy quorum that accepts writes on nodes outside the preference list breaks even the intersection.
  • Take two storage choices with different defaults, a single-leader relational store committing synchronously and a quorum-replicated store that converges eventually, and write the specific product behaviour that would be wrong under each, rather than a general statement about which is stronger.

Deliverable: A page separating what quorum overlap guarantees from what it does not, with one concrete product misbehaviour attached to each gap.

Practice prompt ↗Practice prompt ↗
04Failure is the design
  • For one write path, work through the case where the client times out after the server has already committed, then design the idempotency key: who generates it, how long it is retained, and what the duplicate request returns.
  • Express the retry policy as parameters rather than as a word: maximum attempts, base delay, backoff factor, jitter, and which error classes are retried at all. Then state why retrying a non-idempotent write without a key is a correctness bug and not merely waste.
  • Compute the fan-out effect on tail latency. If a request waits on ten backends and each independently exceeds its p99 one percent of the time, the chance at least one is slow is 1 - 0.99^10, about ten percent. Then write why independence is the optimistic assumption and what correlates them in practice.
  • Name the backpressure mechanism for one queue or one dependency in the design, a bounded queue with shedding or a concurrency limit, and write what the caller is told when it engages.

Deliverable: One write path with an idempotency design, a parameterised retry policy, and a written tail-latency calculation with its assumption named.

Practice prompt ↗Practice prompt ↗Worked solution ↗
05Scaling the hot path
  • Choose cache-aside or write-through for one read path and write the staleness window each produces, then name the invalidation event and what the system does when that event is lost.
  • Design against the stampede: either coalesce requests so only one recomputes a missing key, or refresh early with jittered expiry, and write why identical TTLs on keys populated in the same moment produce a synchronised expiry and a thundering herd.
  • Shard one table by a key you choose, then answer the two questions that break the choice: which queries now require a scatter-gather, and what happens to the distribution when one tenant is a hundred times larger than the median.
  • Write the cost of adding a node under plain modulo placement, where nearly every key moves, against consistent hashing, where roughly one key in n+1 moves, and state what virtual nodes are for.

Deliverable: A caching and sharding decision for one path, each with its failure mode and its rebalancing cost written beside it.

Practice prompt ↗Practice prompt ↗
06Keep the coding hand in, at the bar that applies to you
  • Solve one medium problem in thirty minutes, then spend twenty more making it production-shaped: named invariants, validation at the boundary, and errors that distinguish a caller mistake from an internal fault.
  • Write the tests you would require of a colleague's version of that function: one for empty input, one for the boundary, and one for the case the implementation is most likely to get wrong.
  • Read a piece of your own code from six months ago and write the change you would ask for, phrased as you would actually phrase it in review.

Deliverable: One problem hardened to review standard, with its test list and one written review comment.

Practice prompt ↗Practice prompt ↗
07Defend it while being interrupted
  • Run a forty-five-minute design mock with an interviewer briefed to change a requirement halfway, a tenfold traffic increase or a new strict consistency requirement, and to push on one number you estimated.
  • Rehearse the two sentences a senior loop is listening for: naming the tradeoff you are choosing against and why, and saying what you would measure to learn that the choice was wrong.
  • Prepare the design you regret: a real decision, the constraint that produced it, what it cost, and what you changed afterwards.

Deliverable: Mock notes recording how the design changed under the new requirement, plus a written account of one regretted decision.

Practice prompt ↗Worked solution ↗

Expand any day for tasks and deliverables. Your progress is saved on this device.

Team size, service count and tickets closed say very little. Seniority shows in the decision you owned: what you chose not to build, which constraint you traded away, whose objection you had to resolve before anything could move. A large project where you executed someone else's plan is a small story.

Describe a time you had to troubleshoot a critical system failure unde…

medium
behavioural and engineering judgement

Describe a time you had to troubleshoot a critical system failure under pressure.

Approach
  1. Name the disagreement and how you resolved it with evidence.
  2. Close with what you would do differently, concretely.
  3. Pick a story where you made the decision, not one where you watched it.
Follow-up
  • What would you do differently if you ran that again?
  • How did you know your change caused the improvement?

Describe your experience with integrating software solutions into exis…

medium
behavioural and engineering judgement

Describe your experience with integrating software solutions into existing legacy industrial control systems.

Approach
  1. Name the disagreement and how you resolved it with evidence.
  2. State the situation in two sentences and spend the rest on the reasoning.
  3. Pick a story where you made the decision, not one where you watched it.
Follow-up
  • What did you decide not to do, and why?
  • How did you know your change caused the improvement?

Argue against a design, lose, and commit anyway

medium
disagreementservice boundariesdecision records

Describe a design you argued against and lost. State the failure you predicted as a named mechanism, not a feeling about complexity: two services that would need one transaction, a projection with no rebuild path, a write path with no idempotency key. Say what evidence you brought, what the decision maker weighed instead, and what you did after the decision was made: what you instrumented, what you wrote down, and whether the prediction came true. Five minutes.

Approach
  1. State the prediction in falsifiable form up front: the mechanism, the condition that triggers it, and the observable outcome. A prediction that cannot be checked also cannot be credited to you later.
  2. Show the evidence you had at the time and label each piece honestly as measured, analogous, or intuition. Keeping the intuition is fine; disguising it as data is the thing that erodes your standing in the next argument.
  3. Represent the opposing case at full strength, including the constraint you did not control: a fixed date, a team boundary, or the fact that the decision was cheap to reverse and yours was not.
  4. Make disagree-and-commit concrete. Name the artefact you left behind so the prediction could be settled without you: the alert and its threshold, the counter on the dashboard, the decision note that recorded the trade-off and the condition that would revisit it.
  5. Report the outcome without editing it. If the design held and your predicted mechanism never fired, say so and say what you had mis-weighted, which is more persuasive than a vindication story.
Follow-up
  • What threshold on that alert would have proved you right, and did anyone ever look at it?
  • If the same proposal arrived tomorrow with the same deadline, would you argue it the same way?
  • How did you behave toward the design once it shipped and started failing in a different way than you predicted?
  • 01

    Describe a time you had to troubleshoot a critical system failure under pressure.

  • 02

    Describe your experience with integrating software solutions into existing legacy industrial control systems.

  • 03

    Describe a design you argued against and lost. State the failure you predicted as a named mechanism, not a feeling about complexity: two services that would need one transaction, a projection with no rebuild path, a write path with no idempotency key. Say what evidence you brought, what the decision maker weighed instead, and what you did after the decision was made: what you instrumented, what you wrote down, and whether the prediction came true. Five minutes.

PracHub interview preparation framework ↗
Is this an official Metro Vancouver interview guide?

No. It is PracHub's own research and practice material for the Software Engineer role at Metro Vancouver. Rounds and questions reflect what candidates have reported, not a process Metro Vancouver has published, and they change over time. Confirm the current format and scope with your recruiter.

PracHub interview research ↗
How much time should I spend preparing?

Dedicate at least two weeks to reviewing your past projects, specifically focusing on the technical challenges you faced and how you solved them. You should also brush up on the specific domain requirements of the role you are applying for.

PracHub interview research ↗
What differentiates successful candidates?

Successful candidates demonstrate a balance of technical depth and a "big picture" mindset. They understand that their software is a component of a much larger, vital system and can explain their design choices in that context.

PracHub interview research ↗
Is there a specific culture at Metro Vancouver?

The culture is professional, collaborative, and mission-driven. There is a strong focus on safety, reliability, and public service, which influences how teams approach development and problem-solving.

PracHub interview research ↗
Sources & methodology 3 sources ↗

No official company page is cited. Rounds and questions come from candidate reports and PracHub editorial material; each source shows the date it was read.