At MicroTech Systems, the Software Engineer—often operating within the capacity of a Field Engineer—is the primary technical partner for the company's clients. The role goes beyond development or support work: it bridges the gap between complex IT infrastructure and the business outcomes clients depend on. The work keeps clients’ computer systems, networks, and line-of-business applications secure, efficient, and reliable.
This role is critical to the MicroTech Systems mission of helping people feel secure so they can grow. You will be challenged by diverse environments, ranging from server migrations and hypervisor administration to complex WAN/LAN troubleshooting. The company describes its relentless, never-say-die approach to service as its "secret sauce", and this role offers the opportunity to make a tangible impact on the success of businesses throughout the Treasure Valley and beyond.
Preparation focus
editorialNo round sequence has been reported for this company, so work the categories below and confirm the format with your recruiter.
What to demonstrate
- Breadth across SQL, experimentation and product reasoning
- Ability to state assumptions before choosing a method
How to prepare
- Drill the practice exercises below and time yourself
- Prepare three quantified stories about decisions you drove
PracHub editorial advice for the preparation topics above.
Holding money in a floating-point type, or rounding it more than once
Binary floating point cannot represent 0.01 or 0.1 exactly, so sums drift and two code paths that should agree disagree by cents nobody can trace back. The fix is integer minor units or an exact decimal type end to end, with sub-cent rates expressed as scaled integers such as micro-units, because a per-request price genuinely is smaller than a cent. The second half of the trap is rounding position: rounding each line and then summing gives a different total from summing and rounding once, and half-up and half-even diverge systematically across many lines, so rounding must happen at one named place and every downstream reader must carry the rounded value rather than recompute it from quantity and rate.
Serialising a tenant's writes through select ... for update on a single counter row
It is the first change that makes a counter correct, and it caps that tenant's write throughput at roughly one divided by the lock hold time. A transaction that takes the lock, makes a network call and then commits holds it for the entire round trip: at 2 ms that is about 500 writes per second for the whole tenant, and the largest tenants are exactly the ones that exceed it. The damage then spreads, because every waiter holds a database connection while it queues, so one hot tenant drains the shared pool and the symptom presents as a site-wide latency incident rather than as a lock problem. The repairs are to shrink the critical section to a single statement, to shard the counter into per-(tenant, hour) or per-(tenant, bucket) rows and sum on read, or to batch in memory and flush periodically while accepting the bounded loss that batching implies.
Choosing a schema before the access patterns are known
Write the queries first, with their filters, sort orders, cardinalities and which ones sit on the latency-critical path, then design tables and indexes to serve them. An index nothing queries still costs write throughput and storage, and a hot query with no supporting index becomes a full scan that only hurts once the table is big.
Reading the constraints as preamble rather than as part of the problem
The bounds are usually there to eliminate the obvious approach: n up to 10^5 makes an O(n^2) scan roughly 10^10 operations, far outside any per-test time budget, and an input larger than memory rules out loading it at all. When a bound is not given, ask for it, then say out loud which approach it kills.
Choose a category, try a prompt, then open its approach, worked solution or follow-up when you need it.
Seal an hour under late data with bounded memory
Metering ingest reads 256 partitions at 10,000 to 40,000 events/second. Events carry occurred_at and ingested_at, and during a producer replay the gap between them is hours. Seal each UTC hour once no more than 50 parts per million of that hour's eventual quantity can still arrive, using memory that does not grow with the size of the replay. Define the watermark, the lateness parameter and how you measure it, the structure holding open hours, and the write that performs the seal. State what an idle partition does to your watermark.
Approach
- Two clocks, two jobs. Bucket by
occurred_at, because that is the hour the customer is billed for, and advance the watermark oningested_at, because that is what the fold has consumed and whatsource_max_ingested_atrecords. Conflating them is what makes late data invisible. - The global watermark is the min over partitions of each partition's committed
ingested_at, not the max: the fold is trustworthy only as far as the slowest partition. The consequence is that one idle partition pins the watermark forever and nothing seals, so an idle partition must promote its watermark to wall clock after a stated idle timeout, and that timeout becomes a correctness parameter, because a partition that is slow rather than idle gets sealed past. - Choose the lateness L from the measured distribution of
ingested_at - occurred_at, weighted by quantity rather than by event count. The target is 50 ppm of the hour's quantity, and a replay is rare in events while carrying disproportionate mass, so an event-weighted quantile picks an L that is comfortably wrong at exactly the moment it matters. - Measure that quantile in bounded memory. A Greenwald-Khanna summary gives epsilon-approximate quantiles in O((1/epsilon) log(epsilon n)) space; a t-digest costs more per merge but has relative error that tightens at the tails, which is the half of the distribution you are reading at p99.99. Keep a separate summary per tenant class, because one tenant's batch importer is not the population.
- Hold open hours in a min-heap keyed by
hour_start. When the watermark advances, pop every hour withhour_end + L < Wand seal it: O(log H_open) per advance and O(1) amortised per event to touch its bucket. Memory is open hours multiplied by distinct(tenant, workspace, sku)keys, so cap the number of simultaneously open hours and spill the oldest intousage_rollup_hourlyasstatus='open'with arevisionbump. While an hour is open the row is upsertable, so the store is your overflow. - The seal itself is a conditional write:
update ... set status='sealed', sealed_at=now() where status='open' returning .... Two sealers race on every restart, and the loser must see zero rows and stop rather than write a second value. After the seal, an event for that hour is not an upsert but an adjustment, andsource_max_ingested_atis what proves it arrived afterwards.
Follow-up
- A replay starts during the sealing window for a period you are about to close. What do you do, and what is the customer-visible consequence of each option?
- Your measured quantity-weighted p99.99 lateness is six hours and the invoice must be issued at 02:00 UTC on the first. How do you reconcile those two numbers?
- How would you detect that L has drifted before it costs you an hour's quantity?
Parse and verify a timestamped multi-signature webhook header
An inbound webhook carries a signature header of at most 1 KiB shaped t=<unix seconds>,v1=<64 hex chars>, with up to five v1 values during secret rotation and possibly unknown scheme keys. You hold the raw request body bytes and the currently active signing secrets. Write the parser and the verifier: accept when any active secret reproduces a signature and the timestamp is within a five-minute tolerance in either direction, reject otherwise. Single left-to-right pass over the header, no regular expression. State what is inside the MAC and why.
Approach
- Parse in one scan: split on
,, then on the first=only, since a value may itself contain=under a future scheme. Accepttexactly once and treat a secondtas a reject rather than last-wins. Push everyv1onto a short list and ignore any other key, so av2can be introduced later without breaking this verifier. - Say what is signed: HMAC-SHA256 over the exact byte string
<t>.<raw body bytes>, yielding 32 bytes or 64 hex characters. The timestamp sits inside the MAC because otherwise an attacker replays yesterday's body with its still-valid signature and only has to edit the header timestamp. - Hash the bytes as received. Verifying against a re-serialised JSON body is the usual defect: key order, whitespace and number formatting all change the bytes while the parsed objects compare equal, so signatures fail for honest senders and the popular 'fix' is to stop checking.
- Compare in constant time over fixed-length digests. Decode the hex to 32 bytes, accumulate
acc |= a[i] ^ b[i]across the whole length, and testacc == 0at the end. Evaluate every candidate without an early exit; at five candidates that is five HMACs over the body, linear in body size and negligible beside the network. - Apply the tolerance as a two-sided bound, rejecting when
|now - t| > 300seconds. A sender whose clock runs ahead of yours is an ordinary case, and an unbounded future timestamp is a free replay window. - Complexity: O(L) over the header producing k candidates, plus k HMACs at O(|body|) each. Space is O(k) beyond the body itself. Do the cheap rejections, including the tolerance check, before any cryptography runs.
Worked solution 15 min
- Write the grammar on one line before coding:
header := field (',' field)*,field := key '=' value, split on the first=only. - Implement the parser to return
{t: int, v1: [hex, ...]}, rejecting a missingt, a duplicatet, anyv1that is not 64 hex characters, and a header over 1 KiB, all before any cryptography runs. - Implement the verifier: for each active secret compute
HMAC-SHA256(secret, f'{t}.'.encode() + raw_body), compare it in constant time against each parsedv1, and OR the results with no early exit. - Test with a valid signature; the same body with
tmoved 400 seconds into the past; the same body witht400 seconds into the future; a header carrying an unknownv2=alongside a validv1; and a body re-serialised with different JSON key order.
Follow-up
- The body is 40 MB. What changes about where you verify, and what can you do before the whole body has arrived?
- A customer reports that signatures fail for exactly the requests whose body contains a non-ASCII character. What is your first hypothesis?
- How do you rotate the signing secret with no failed deliveries, and how long do both secrets stay live?
Fold a deduplicated usage stream into hourly rollups
You are given one day of usage_event rows, up to 250 million, each carrying event_id, tenant_id, workspace_id, environment, sku, quantity numeric(20,6), idempotency_key, occurred_at and ingested_at. Produce usage_rollup_hourly cells keyed (tenant_id, workspace_id, sku, hour_start) with quantity_sum, event_count and source_max_ingested_at. An event counts once per (tenant_id, idempotency_key). The rollup grain has no environment column, so state your filter. One pass. Give your time and space bounds, and say what the deduplication actually costs in memory.
Approach
- Bucket on
occurred_at, neveringested_at:hour_start = date_trunc('hour', occurred_at at time zone 'UTC'). The two columns answer different questions.occurred_atsays which hour the customer is billed for;ingested_atsays how current the fold is. Using the second for the first makes late data invisible instead of correctable. - The fold is trivial and the deduplication is the entire cost, so price it before designing anything clever. An exact set over
(tenant_id, idempotency_key)at 250M entries, stored as a 16-byte 128-bit hash in an open-addressed table at 0.7 load factor, needs about 357M slots at 16 bytes each, roughly 5.7 GB. The fix is partitioning byhash(tenant_id) % Pso each shard holds 1/P of the set and no tenant's keys straddle shards. - Rule out a Bloom filter as a replacement, in the right direction: a false positive reports 'already seen' for an event never seen, so you drop a real event and lose revenue with no error raised. It is usable only as a negative pre-filter in front of the exact set, where a miss is conclusive and a hit must fall through to the real lookup.
- Accumulate in scaled integers, not binary floating point.
numeric(20,6)admits values below 10^14, so one event scaled to micro-units can reach 10^20, past int64's 9.22 x 10^18; use a 128-bit or arbitrary-precision accumulator unless you first bound the per-event maximum. binary64 represents integers exactly only to 2^53, about 9.01 x 10^15, and cannot represent 0.1 at all, so two runs that sum in different orders disagree. - Carry
source_max_ingested_at = max(ingested_at)over the events folded into each cell, and countevent_countover accepted, post-dedup events. Without that watermark there is no way to prove later what a number did and did not include, which is the first question any reconciliation asks. - State the environment filter explicitly, because the rollup grain cannot record it. A fold that quietly includes
stagingbills non-production traffic; one that quietly excludes it loses a cost signal. Production-only is the billing answer, and either way it belongs in the job name and the output metadata. Complexity: O(n) time, O(distinct dedup keys) space, dominated by the dedup set rather than by the cells.
Follow-up
- A producer retries at 23:59:59 and the retry lands at 00:00:01. The unique index on the daily-partitioned table must include the partition key. What gets double-counted, and what is the smallest change that fixes it?
- The consumer acknowledges its batch before committing the fold. Which failure loses revenue now, and which arrangement duplicates instead?
- What makes a re-run over the same day produce byte-identical rollups?
Explain why the metering dashboard scans every daily partition
usage_event is range-partitioned daily on ingested_at and holds tenant_id, workspace_id, environment, sku, quantity numeric(20,6), occurred_at and ingested_at. The only relevant index is on (occurred_at). A dashboard runs select sku, sum(quantity) from usage_event where tenant_id = $1 and date_trunc('hour', occurred_at) >= $2 and environment = 'production' group by sku, and EXPLAIN shows a sequential scan of every partition. Give each distinct reason, rewrite the predicate so an index can serve it, propose the index, and state the write cost its column order adds.
Approach
- Separate the three causes rather than blaming one. First,
date_trunc('hour', occurred_at)wraps the column, so the predicate is not sargable against a btree on the bare column. Second, pruning keys off ingested_at while the query constrains occurred_at, so no partition can be excluded. Third, even made sargable, (occurred_at) is not tenant-leading, so for one tenant among thousands the scan reads the whole time range and discards nearly all of it. - Rewrite the bound carefully, because the obvious rewrite is only conditionally equivalent.
date_trunc('hour', x) >= $2equalsx >= $2only when $2 is already hour-aligned; for an arbitrary $2 it meansx >= date_trunc('hour', $2) + interval '1 hour'. Normalise the parameter in the caller and leave the column bare. - Restore pruning with a second, redundant predicate on the partition key:
ingested_at >= $2 - interval '<late-data horizon>'. State both sides of it. It prunes to a handful of partitions, and it silently omits any event whose ingest lagged past that horizon, which is precisely what a producer replay produces. Either document the horizon as a stated bound, or partition on occurred_at and move the problem into the dedup window instead. - Propose
(tenant_id, occurred_at) include (sku, quantity)per partition. A partial indexwhere environment = 'production'mostly saves size rather than selectivity, since production dominates the three environments; take it if non-production is a meaningful share and skip it otherwise. - Price the write path honestly. At roughly 250M rows/day each extra index is another insert plus WAL per row, and a tenant-leading key scatters inserts across one hot leaf per active tenant instead of appending to a single rightmost leaf, so page dirtying and random I/O both rise. An INCLUDE payload widens every leaf entry and enlarges the index accordingly.
- Add the index-only-scan caveat before someone reports it as a regression: on a freshly appended table the visibility map is not yet set for recent pages, so the INCLUDE columns still cost heap fetches until autovacuum has been through, and the newest hour is exactly the data the dashboard reads.
Follow-up
- CREATE INDEX CONCURRENTLY is not supported on a partitioned parent. Give the sequence that gets this index onto 400 existing partitions without blocking ingest.
- One tenant holds 200 times the median row count and the dashboard still times out for them with the index in place. What changes?
- Should this read hit
usage_rollup_hourlyinstead? State what that costs in freshness and what the watermark lets you promise.
Paginate a tenant's delivery export without skipping rows
A customer exports webhook_delivery: delivery_id (bigint identity), subscription_id, tenant_id, event_id, status, attempt_count, next_attempt_at, created_at, delivered_at, updated_at. The endpoint runs select ... where tenant_id = $1 order by created_at desc limit 100 offset $2, and customers report rows missing from exports taken while new deliveries are being inserted. Write the replacement query and the index that supports it, paging a tenant's deliveries newest first at constant cost per page. State why updated_at cannot be the cursor column.
Approach
- Name the defect precisely. OFFSET is a position in a result set that is recomputed on every request, so a row inserted ahead of the window shifts everything back by one and the next page starts after a row the client never received. Nothing errors and no identifier gap appears, so the loss is silent.
- Replace the position with a value predicate over a stable, unique, indexed ordering:
where tenant_id = $1 and (created_at, delivery_id) < ($2, $3) order by created_at desc, delivery_id desc limit 100. The row comparison is load-bearing: created_at alone is not unique, so ties straddling a page boundary are dropped or repeated, which is the same bug in a smaller window. - Index
(tenant_id, created_at, delivery_id). PostgreSQL scans a btree in either direction, so an all-DESC ORDER BY is served by an ASC index read backwards and no DESC modifiers are needed; they only matter when the ORDER BY mixes directions. Confirm the plan has no Sort node above the index scan, or the LIMIT stops being an early exit. - Price both forms: keyset is one index descent plus 100 adjacent leaf entries per page, constant regardless of depth, while OFFSET still produces and discards every skipped row, so page N costs time proportional to N times the page size and a deep page on a large table goes from milliseconds to seconds.
- Rule out updated_at as the cursor from the precondition, not from taste: a cursor column must never change value for a row already paged past. updated_at moves on every delivery attempt, so a row the client already emitted re-enters a later page and is exported twice. created_at and delivery_id are immutable, which is the whole qualification.
Worked solution 20 min
- Load about 50k deliveries for one tenant, then walk them with the OFFSET query while a writer inserts 10 rows/second, collecting every returned delivery_id.
- Compare the distinct ids collected against the set of ids that existed when the walk started, and record the shortfall.
- Repeat the walk with the keyset query and confirm every pre-existing id is returned exactly once.
- Run
explain (analyze, buffers)on page 1 and page 500 of each form and compare shared buffer hits.
Follow-up
- The client wants a snapshot as of one instant rather than a live tail. Compare a repeatable-read transaction held open, an added
created_at <= $snapshotbound, and a materialised export table. - A retention job deletes deliveries older than 90 days. What does a client mid-walk see, and does keyset pagination help at all?
- The customer wants to resume an export from yesterday's last cursor. What must be true of the cursor for that to be safe?
Make run creation safe when the client times out and retries
POST /v1/runs inserts a job_run row and dispatches a sandbox. The caller is a customer's CI pipeline with a 10-second timeout and three automatic retries. A run that takes 12 seconds to start returns after the client has already given up, so the retry starts a second sandbox and bills it. Redesign the endpoint: the key the client sends, its scope and storage, what happens when the same key arrives with a different body, what happens when a retry arrives while the first request is still in flight, and how long the key stays honoured.
Approach
- Name the defect before designing: the client's timeout is an unknown outcome, and the naive shape gives it no way to ask whether the earlier call landed, so its only choices are to duplicate the run or to drop it.
- Require an
Idempotency-Keyheader scoped to (tenant_id, key) rather than to the credential, so a rotated or replaced credential still replays. Store the key with a request fingerprint, SHA-256 over method, path and the canonicalised body, plus state, the stored response status and body, and the resulting run_id. - Make the claim a write rather than a read: insert the key row inside the same transaction as the run under
unique (tenant_id, idempotency_key). The loser of a concurrent race takes a unique violation and then reads the winner's row, which is what makes the duplicate case deterministic instead of timing-dependent. - Define three outcomes precisely. Same key, same fingerprint, completed: replay the stored response with a header marking it a replay. Same key, different fingerprint: 422 with an
idempotency_key_reusecode, never the stored response. Same key still in flight: 409 with Retry-After, because blocking the second caller holds a connection for the duration of someone else's request. - Close the dispatch gap with an outbox row committed alongside the run and a relay that enqueues it. Commit-then-publish loses the dispatch if the process dies in between; publish-then-commit hands a worker a run_id that does not exist yet.
- Set retention from the client, not from storage cost: the key must outlive the caller's worst-case total retry window, so publish a number such as 24 hours and state that a key reused after expiry legitimately creates a second run.
Follow-up
- The SDK generates a fresh key on every attempt rather than reusing one. What in your response surface makes that visible instead of silently doubling the bill?
- How does this interact with job_run.parent_run_id: is an automatic retry of a failed run the same object as a client retry of the request?
Write the delivery guarantee and replay API for outbound events
The webhook-delivery service fans events to customer endpoints, tracked in webhook_delivery (subscription_id, tenant_id, event_id, redelivery_seq, status, attempt_count, next_attempt_at, lease_token, last_response_code, payload_digest). Customers are asking for exactly-once and in-order delivery. Write the contract you can actually honour: the guarantee, the headers that make it usable, which customer response codes are retryable, the retry schedule and terminal condition, what happens to an endpoint that has been down for a day, and the shape of the redelivery endpoint. State plainly what you are not promising and what the customer must do instead.
Approach
- Refuse exactly-once with the mechanism rather than with policy: the customer's acknowledgement can be lost after they have already committed, so the sender cannot distinguish unprocessed from processed-but-unacknowledged and must retry. The deliverable is at-least-once with a stable event identifier and the customer documented as the deduplicating party.
- Price ordering instead of promising it. With parallel attempts per subscription, a retried event overtakes a newer one, so in-order delivery requires a single in-flight attempt per subscription, which turns any slow endpoint into head-of-line blocking for that subscription's whole queue. Offer it per subscription with that cost written down.
- Define the response contract from the customer's side: 2xx is accepted, 408, 429 and 5xx are retryable, 410 disables the subscription, and every other 4xx is permanent and terminal. Publish the read timeout and tell the customer to acknowledge first and process asynchronously, since their processing time otherwise consumes your worker occupancy.
- Publish the schedule and its end: capped exponential backoff with full jitter, sleeping uniformly in [0, min(cap, base * 2^attempt)] so a mass failure does not re-synchronise the herd, terminal after a stated attempt count or age, plus a per-endpoint circuit breaker that records further deliveries as dropped_circuit_open and notifies the owner rather than burning shared worker capacity.
- Shape redelivery as an insert, not a reset: POST to a redeliveries collection with event ids or a time window creates rows at redelivery_seq + 1 carrying the same bytes, which payload_digest lets you prove, leaving the original terminal rows intact as the record of what happened.
- Compare the event's tenant against the subscription's tenant at enqueue and again immediately before signing, because cross-tenant delivery originates in an enqueue path that took the subscription from one lookup and the payload from another, not in the worker.
Worked solution 30 min
- Write the guarantee sentence and the one-sentence reason exactly-once is not available over HTTP.
- List the headers a customer needs to build their own dedup table: event id, delivery id, attempt number, subscription id, signature and timestamp.
- Write the response-code table with four classes and the action for each, including the 410 case.
- Write the retry schedule with concrete numbers, the terminal condition, and the breaker's threshold and its effect on the delivery row's status.
- Specify the redelivery request and response, and say which columns change and which do not.
Follow-up
- A customer wants everything they missed during their six-hour outage. Do the dropped_circuit_open rows let you answer that, and what retention bound does the answer depend on?
- You offer the ordered mode and one customer's endpoint slows to two seconds per request. What do their delivery metrics look like, and what do you owe them in the docs?
Metering partition crash-loops and the sealing watermark freezes
One metering-ingest partition has stopped advancing. Lag grows linearly, the consumer restarts about every 40 seconds, and the same offset appears in every startup log while other partitions stay healthy. Events are committed in batches of a few thousand and the acknowledgement follows the commit. Sealing is six hours away and source_max_ingested_at for that partition's tenants is frozen. Give an ordered checklist, a containment action available within minutes, and the durable fix, saying what each does to exactly-once accounting.
Approach
- Distinguish a poison record from a capacity problem in one measurement: compare the offset and the exception across restarts. An identical pair every time is deterministic failure on one record, whereas a throughput problem still advances the offset between crashes.
- Read the record from a separate consumer group so the bytes can be inspected without perturbing the stuck consumer, then classify the defect: schema violation, a quantity failing the non-negative check, a null workspace, an unmappable SKU enum, or a payload past a size limit. That classification decides whether this is a producer bug or a missing consumer guard.
- Account for batch granularity before acting. With commits of a few thousand, one bad record fails thousands of good ones, so the blast radius is the batch. Halve the batch around the offset to isolate the record, or move to per-record error isolation so the radius becomes the record.
- Contain by diverting that record to a dead-letter store with its raw bytes and offset, then resume. This is safe here precisely because the acknowledgement follows the commit: the good records from the failed batch are re-consumed and absorbed by the uniqueness check on (tenant_id, idempotency_key) rather than counted twice.
- Make the fix durable with per-record error isolation, a bounded poison counter, and an alert on dead-letter rate rather than on lag alone, since lag only reveals this after the sealing margin has already been eaten.
- Check the horizon before replaying anything. The unique index lives on a daily-partitioned table and therefore includes the partition key, so it deduplicates within a day only; a replay landing on a later ingest day needs the separate dedup store or it double-counts into a tenant's bill.
Follow-up
- Move the acknowledgement before the commit and describe exactly what is lost and what is duplicated in each of the two crash windows.
- Sealing is in six hours and the partition will not drain in time. What do you seal on, and what does the invoice have to record so the difference is explainable later?
- A producer replays two weeks of events next month. Which part of your fix stops holding, and what is the dedup horizon you would actually configure?
For someone who has spent the last few years shipping features and reading other people's code, and who has not solved a timed problem from a blank file in a long time. Five days rebuild the primitives and the patterns that sit on them, working from invariants rather than remembered solutions, and the last two attach that back to the rest of the loop.
Prepare, practise & reflect
One practical outcome each day. Spend longer where you need it.
0 / 7 done01Rebuild the primitives by implementing them
- Implement a dynamic array with doubling growth and an operation counter, then change the growth rule to add a fixed sixteen slots instead, and time both for n of ten thousand, a hundred thousand and a million. The fixed-increment version resizes n/16 times at O(n) each, so its total work is quadratic; doubling is what makes append amortised constant.
- Implement a hash map with separate chaining and a load-factor resize, then insert ten thousand keys engineered to land in one bucket and record what happens to lookup time, so that average-case O(1) becomes a claim with a stated precondition rather than a reflex.
- For dynamic-array append and hash-map insert, write down which cost is amortised rather than worst-case, which single operation pays the whole bill, and what a system with a hard per-operation deadline would have to do instead.
Deliverable: Two working implementations plus a timing table showing the input at which each structure's advertised complexity stops holding.
Practice prompt ↗Practice prompt ↗Worked solution ↗02Arrays under an invariant: two pointers, sliding window, binary search
- Solve longest-subarray-with-sum-at-most-K using a sliding window, then run it on an input containing negative numbers and watch it return the wrong answer: extending the window only moves the sum monotonically when every element is non-negative, and that precondition is the whole reason the technique works.
- Write the binary search that finds the first index satisfying a predicate rather than an exact value, put the loop invariant above the loop in a comment, and verify termination on the two inputs that break careless versions: the empty range, and a range where every element satisfies the predicate.
- Compute the midpoint as lo + (hi - lo) / 2 and write one line on why the obvious (lo + hi) / 2 is a genuine defect in a fixed-width integer type and a non-issue in a language with arbitrary-precision integers.
Deliverable: Three solved problems, each with its invariant written above the loop, plus one recorded input on which the sliding window is provably wrong.
Practice prompt ↗Practice prompt ↗03Sorting, heaps, and the greedy argument that has to be proved
- Solve one top-k problem three ways, by full sort, by a size-k heap, and by quickselect, then write the values of n and k at which each becomes the right choice, along with quickselect's quadratic worst case and why a randomised pivot makes that unlikely rather than impossible.
- Implement bottom-up heapify and count sift-down steps to confirm it does linear work rather than n log n, because most nodes sit near the bottom of the tree and therefore move only a short distance.
- Take interval scheduling by earliest finishing time and write the exchange argument out in full: given any optimal schedule, swapping in the earliest-finishing interval keeps it feasible and no smaller. Then construct the weighted variant where that same greedy fails and name what has to replace it.
Deliverable: A three-way top-k comparison with measured crossover points, one written exchange argument, and one counterexample to a greedy rule that looks almost identical.
Practice prompt ↗Practice prompt ↗04Recursion, memoisation, and the step to a table
- Take one problem with overlapping subproblems, such as edit distance or coin change, instrument the plain recursion with a call counter to show the blow-up, then add memoisation and re-count.
- Convert the memoised version to a bottom-up table and state the two properties you relied on: each subproblem's result depends only on its arguments, and the dependencies form a DAG you can enumerate in order.
- Rewrite one deep recursion with an explicit stack, then find the input length at which the original hits the interpreter's frame limit, which defaults to about a thousand frames in CPython, so you know when the rewrite is required rather than decorative.
Deliverable: One problem in three forms, naive, memoised and tabulated, with call counts for each and the input length at which recursion depth becomes the binding constraint.
Practice prompt ↗Practice prompt ↗Worked solution ↗05Graphs, where most of the work is choosing the traversal
- Implement BFS and DFS over one adjacency list, then answer for each which finds a shortest path in an unweighted graph and which you would use to detect a cycle in a directed graph, including why the in-progress versus finished distinction matters for the second.
- Implement topological sort by in-degree, feed it a graph containing a cycle, and confirm the failure signature is that fewer than V nodes come out rather than an exception, then note that the order it produces is one of several valid ones.
- Run a shortest-path search on a graph with a single negative edge weight and show the wrong answer, then write the precondition Dijkstra actually needs, non-negative weights, because it finalises a node's distance the first time that node is popped, and name the algorithm you would switch to and its own limit.
Deliverable: A small graph library with BFS, DFS and topological sort, plus two inputs that produce documented wrong answers under the wrong algorithm choice.
Practice prompt ↗06One day for everything that is not an algorithm
- Sketch one system only to the depth a coding-heavy loop tends to reach: the endpoints, what the service stores, and the single query pattern that decides the schema. Stop at twenty-five minutes.
- Prepare the project answer for an interviewer who codes, which means rehearsing the two levels they push to: the specific thing you built, and why you chose that approach over the alternative they will name. Open with a number and be ready to say what it excludes.
- Prepare the answer to what you would do differently, choosing a real technical mistake with a specific fix rather than a complaint about process or staffing.
Deliverable: One design sketch at endpoint-and-schema depth, plus a project answer rehearsed to two levels of follow-up.
Practice prompt ↗07Solve out loud, under time
- Do three timed problems at twenty-five minutes each in a plain editor with no autocomplete and no execution until the end, then tally separately the failures that were syntax and the ones that were approach, because those two numbers call for different fixes.
- Narrate one solution from the first sentence, stating the approach and its complexity before writing any code, and rehearse the sentence you will use when you realise mid-solution that the approach is wrong.
- Re-solve from blank the two problems you were slowest on this week and compare the times against the day they first appeared.
Deliverable: A recording of one fully narrated solution and a tally that separates syntax failures from approach failures.
Practice prompt ↗Worked solution ↗Expand any day for tasks and deliverables. Your progress is saved on this device.
Bring the two or three numbers the story rests on and know how they were collected. A p99 whose timer starts inside your handler excludes the time a request spent queued, so it can sit flat while users wait longer. Give the window, the percentile and what the measurement left out, or drop the number.
We value integrity and persistence; these questions help us determine …
We value integrity and persistence; these questions help us determine if you truly "own" the problems you encounter.
Approach
- State the situation in two sentences and spend the rest on the reasoning.
- Give the blast radius: what could have broken, and what you measured.
- Close with what you would do differently, concretely.
Follow-up
- How did you know your change caused the improvement?
- What did you decide not to do, and why?
Argue against failing open when the control plane is unreachable
The gateway caches credential-to-context decisions with a sixty-second TTL. A design proposal says that when control-plane reads fail, pods should keep serving from expired entries indefinitely so a control-plane outage never becomes a product outage. You believe that converts every revocation into an unbounded one. Describe a design you argued against while it was still a live proposal: what you measured or modelled to make the case, what you conceded, who decided, and what happened afterwards. Say what would have changed your mind before the decision, not after it.
Approach
- Reframe it from a values argument into a bounded-staleness argument. Both sides already accept the cache; the disagreement is only about the ceiling on how long a revoked credential keeps authorising. Put a number on the table — serve stale for up to fifteen minutes, then fail closed — and make the other side argue against a number rather than against a principle.
- Bring arithmetic rather than adjectives: the rate of revocations with revoked_reason in ('suspected_leak','auth_version_bump'), the observed distribution of control-plane unavailability, and the product of the two, which is expected requests served by revoked credentials per outage-hour. At 30k requests/second the unbounded version is not a subtle exposure and the number says so.
- Concede the strong half of the opposing case first, because that is what buys you the room: failing closed turns one service's outage into a total outage across three regions, and a control plane doing tens of writes per second is not engineered to the gateway's availability target. A proposal you have not steelmanned reads as reflex.
- Propose the asymmetry that usually resolves this: stale entitlements cost bounded money (a quota fifteen minutes out of date over-serves by a computable amount), while a stale revocation costs unbounded access. Split the cached decision by what it authorises, give the two halves different staleness ceilings, and let the entitlement half fail open while the revocation half fails closed.
- State the propagation dependency plainly, since it is the part that is missed: validity is also derived from the principal's auth_version, so password reset and sign-out-everywhere flow through this same cache. A design that bounds staleness for explicit revocation and not for auth_version bumps has only fixed half of it.
- Say who decided, and what you did afterwards in either outcome: write the decision down with its number and a review date, and instrument the exposure you were worried about so the next round of the argument is settled by data instead of by seniority.
Follow-up
- Publish-subscribe invalidation is lossy under a partition, and a TTL is the only hard bound. What TTL do you pick, and what does it cost you at 30k requests/second?
- The key was revoked because it was found in a public repository. Does your answer change, and where does that urgency live in the design?
- You lost the argument and six weeks later the failure you predicted happens. What do you say in the review, and what do you not say?
Own the incident where invoices undercounted metered usage
A metering consumer acknowledged each batch before committing the fold into usage_rollup_hourly. A rolling deploy restarted consumers mid-batch for two hours; roughly 1.4M usage_event rows were acknowledged and never folded, and 61 invoices sealed against the resulting rollups before anyone noticed. Take the owner's role. Describe an incident of comparable blast radius you owned: how it surfaced, the query that sized the loss, what you stopped first, and how the money was corrected. Give a wall-clock timeline and one thing you got wrong while it was still live.
Approach
- Open with the invariant that broke and the direction of the error, because they determine everything else: acknowledging before committing makes the consumer at-most-once, so this loses events rather than duplicating them, and loss raises no error anywhere. A listener who hears 'we lost revenue silently' knows immediately why detection took two hours.
- Size it with a stated reconciliation rather than an adjective: sum(quantity) from usage_event grouped by (tenant_id, sku, hour of occurred_at) over the window, against usage_rollup_hourly.quantity_sum on the same keys, filtered to environment='production' because staging and sandbox are metered but not billed. Then bisect by hour and tenant until single cells explain the gap. Say how long that ran and whether a replica could serve it while the incident was live.
- Separate mitigation from fix and say which came first. Mitigation is holding the sealing job, because a sealed row is frozen by design and every minute of sealing converts a recoverable rollup into an invoice correction. The fix is moving the acknowledgement after the commit, which re-introduces duplicates that the dedup check on (tenant_id, idempotency_key) must now absorb.
- State the correction path in the domain's own terms: sealed periods are never edited, so each affected tenant gets an adjustment line on the next invoice with kind='adjustment' and voided_by_line_id pointing at the line it reverses, priced against the same rate tier and carrying the watermark it priced against. That is four separate numbers — tenants affected, minor units, the cycle the adjustment lands in, and when customers were told.
- Close on one prevention control with its cost, not five: a per-hour reconciliation comparing raw sum to rollup sum that pages above a threshold. Name the threshold and the false-page rate you accepted, because a detector nobody will keep staffed is not prevention.
- Name a mistake you made inside the response window — the wrong first hypothesis, a mitigation that made it worse — rather than a design mistake from six months earlier. That is the part candidates rehearse away and interviewers weight heavily.
Follow-up
- Your fix moves the acknowledgement after the commit. What breaks now, and what absorbs it?
- One undercharged tenant has since churned. Do you bill them, and who decides?
- How would you have caught this in ten minutes instead of two hours, and what would that detector cost you in pages per week?
- 01
We value integrity and persistence; these questions help us determine if you truly "own" the problems you encounter.
- 02
The gateway caches credential-to-context decisions with a sixty-second TTL. A design proposal says that when control-plane reads fail, pods should keep serving from expired entries indefinitely so a control-plane outage never becomes a product outage. You believe that converts every revocation into an unbounded one. Describe a design you argued against while it was still a live proposal: what you measured or modelled to make the case, what you conceded, who decided, and what happened afterwards. Say what would have changed your mind before the decision, not after it.
- 03
A metering consumer acknowledged each batch before committing the fold into usage_rollup_hourly. A rolling deploy restarted consumers mid-batch for two hours; roughly 1.4M usage_event rows were acknowledged and never folded, and 61 invoices sealed against the resulting rollups before anyone noticed. Take the owner's role. Describe an incident of comparable blast radius you owned: how it surfaced, the query that sized the loss, what you stopped first, and how the money was corrected. Give a wall-clock timeline and one thing you got wrong while it was still live.
Is this an official MicroTech Systems interview guide?
No. It is PracHub's own research and practice material for the Software Engineer role at MicroTech Systems. Rounds and questions reflect what candidates have reported, not a process MicroTech Systems has published, and they change over time. Confirm the current format and scope with your recruiter.
PracHub interview research ↗How difficult are the technical interviews?
The interviews are designed to be challenging but fair. They center on real-world troubleshooting scenarios that you would actually encounter on the job, so lean on your practical experience rather than abstract theory.
PracHub interview research ↗What is the best way to stand out?
The most successful candidates are those who demonstrate a high degree of ownership and self-awareness. Show us that you are not just a technician, but a partner who cares about the client’s long-term success.
PracHub interview research ↗What is the typical timeline for the process?
MicroTech Systems moves as quickly as possible to identify the right fit. While timelines can vary, the company aims to keep the process efficient and respect your time as a professional.
PracHub interview research ↗Is this a remote or on-site role?
As a Field Engineer, the role requires a presence to support customers throughout Southern Idaho and Eastern Oregon. Expect to be mobile and actively engaged with client environments.
PracHub interview research ↗Sources & methodology 3 sources ↗
No official company page is cited. Rounds and questions come from candidate reports and PracHub editorial material; each source shows the date it was read.
- 01PracHub interview research ↗
PracHub editorial research into this company and role, maintained with this guide. Candidate-reported, not an employer publication.
PracHub page · Accessed 2026-09-22 - 02PracHub Software Engineer practice ↗
Cross-company practice questions for this role.
PracHub page · Accessed 2026-09-22 - 03PracHub interview preparation framework ↗
The framework the preparation plan follows.
PracHub page · Accessed 2026-09-22
Explore related engineering environments and compare the preparation focus.
Vercel Software Engineer Interview Guide
Debugging practice for Vercel software engineer prep built on a reproduction you trust, narrowing to the smallest failing input, and changing one variable per run so the result stays attributable.
Together Ai Software Engineer Interview Guide
Failure-handling practice for Together Ai software engineer candidates: requests whose outcome a timeout leaves unknown, where a retry is safe, and deduplicating at the receiver instead of assuming exactly-once delivery.
Scale Ai Software Engineer Interview Guide
Data structures and algorithms practice for Scale Ai candidates, where stating a bound means stating its precondition: constant-time hash lookup is an average case over keys that spread.
Notion Software Engineer Interview Guide
Data structures and algorithms practice for Notion candidates, where stating a bound means stating its precondition: constant-time hash lookup is an average case over keys that spread.