Navitus Health Solutions hires Software Engineers; this guide collects what candidates report about the process.
Screening Call
reportedInitial call with an HR representative to assess basic qualifications and fit.
What to demonstrate
- Initial call with an HR representative to assess basic qualifications and fit
- Depth in Application Systems (Enterprise Apps)
How to prepare
- Be able to walk your CV end to end in two minutes, and say why this company specifically.
- Have your salary expectations, notice period and location constraints ready, and ask for the rest of the loop in writing.
Technical Evaluation
reportedIn-depth technical assessment with members of the hiring team to evaluate technical skills.
What to demonstrate
- In-depth technical assessment with members of the hiring team to evaluate technical skills
- Depth in Application Systems (Enterprise Apps)
How to prepare
- Answer aloud and timed: What is your experience with the specific tech stack outlined in the role requirements?
- Answer aloud and timed: How do you handle database optimization when dealing with large-scale healthcare data sets?
PracHub editorial advice for the preparation topics above.
Understand the Business
Research the role of pharmacy benefit management to better understand the context of the problems you will be solving.
Clarify Expectations
Always ask for clarification if a question seems ambiguous; this demonstrates a thoughtful approach to engineering.
Highlight Reliability
In a healthcare-focused company, consistency and attention to detail are prized attributes.
Be Transparent
If you encounter a technical question you don't know, explain how you would go about finding the answer rather than guessing.
Choose a category, try a prompt, then open its approach, worked solution or follow-up when you need it.
Diff a projection against the primary without per-row point reads
The listing projection has drifted and some rows show a stale version. The primary holds 40,000,000 resource rows across 12,000 tenants while serving 1,200 writes and 14,000 reads per second. The obvious repair, reading each resource row and comparing its version against the projection, is correct and would eventually finish. Explain precisely why it is unacceptable here, then give a diff that finds the differing rows, state its complexity, and make it safe to run against a live primary. Replication lag is usually under 100 ms and is not bounded.
Approach
- Quantify the naive cost rather than calling it slow: 40,000,000 point reads at even 0.5 ms each is over five hours serialised, and the only lever is concurrency, which is exactly what you cannot spend. The primary's pool is sized for the write path, and 40,000,000 random reads evict the buffer cache that sustains the 85 percent cache hit rate, so the audit degrades the system it is auditing.
- Replace random access with one ordered pass per side. Both sides can be read in (tenant_id, resource_id) order, which is a sequential scan on each and a merge join in O(n) time and O(1) memory. For a dense diff that is the whole answer, and it reads the primary once instead of 40,000,000 times.
- For the expected sparse case, compare range hashes instead of rows: partition the key space, compute per range an order-independent aggregate over hash(resource_id, version), compare aggregates, and descend only into ranges that differ. With d differing rows and branching factor B, at most d ranges mismatch per level, so the drill-down examines O(d log_B(n/d)) ranges and reads full rows only in mismatching leaves.
- Aggregate with a sum modulo 2^64 or a multiset hash, never XOR. XOR is order-independent but self-cancelling, so two rows wrong in the same way, or a row duplicated on one side, leave the range aggregate matching and the range is declared clean.
Follow-up
- The diff reports 900 stale rows. How do you decide between patching those rows and rebuilding the projection from resource_revision?
- Same job, but the projection lives in a search index that cannot be scanned in key order. What changes?
Archive a resource graph without breaking live references or recursing
Resources reference other resources within a tenant; for the largest tenant the reference table holds up to 2,000,000 nodes and 8,000,000 edges. Archiving a resource must archive everything reachable from it that nothing outside the set still references, refuse when a live external referrer exists, and terminate when references form cycles, which they legitimately do. Produce the archive order and the refusal list, targeting O(V+E). Say what stops the traversal crossing a tenant boundary, and why recursion is the wrong control structure at this size.
Approach
- Load the subgraph with the tenant predicate on both endpoints of the edge, not only on the side you started from. Scoping the left table alone is the classic cross-tenant leak: one mis-entered edge then pulls another tenant's resources into the traversal and, worse, into the archive.
- Traverse iteratively with an explicit stack. A 2,000,000-node graph can hold a chain deep enough to exhaust a native stack in the low tens of thousands of frames, and that failure is a process crash rather than an error you can return.
- Treat cycles as data rather than corruption: compute strongly connected components with Tarjan in O(V+E) using its own explicit stack, then condense. The condensation is a DAG, so a topological order over it gives the archive order, and every member of a component archives in one transaction because no order within a cycle is valid.
- Decide refusals with reverse edges. A candidate is archivable only if every in-edge originates inside the candidate set, so build the transpose or count in-degrees restricted to the visited set, and emit each blocked resource with the id of the external referrer, which is the only part of the answer an operator can act on.
Follow-up
- The graph is read in one query and the archive writes a minute later. What can change in between, and how do you make the write safe?
- The candidate set is 400,000 resources. Is that one transaction, and if not, what does a half-finished archive look like to a reader?
Merge partitioned event streams into one ordered feed with bounded lateness
The read-model service consumes 64 log partitions carrying about 4,000 events per second in total. Each partition is ordered within itself, but partitions drift by up to 30 seconds, and the activity feed must present a tenant's events in occurred_at order. Produce the merge. State its complexity, the buffer it requires in events and in bytes, what happens when one partition is idle, and what you do with an event that arrives after you have already emitted its position. Payloads average 1 KB.
Approach
- Merge with a min-heap over the 64 partition heads keyed on (occurred_at, event_id): O(log P) per event and O(n log P) overall. The tie-break on event_id is what makes the output deterministic when two partitions carry the same millisecond, which matters because the feed is paginated and a non-deterministic order reorders pages under the reader.
- Emitting the heap head is only correct once every partition has produced everything up to that timestamp, so the emit condition is a watermark: the minimum across partitions of the highest occurred_at seen, less the allowed lateness. Events are held until the watermark passes them, which is what turns individually ordered streams into a jointly ordered one.
- Size the buffer from the lateness rather than guessing: 4,000 events per second times 30 seconds is 120,000 buffered events, and at 1 KB each about 120 MB of heap. That number is the real price of the ordering guarantee and belongs in front of whoever asked for it.
- Handle the idle partition explicitly, because it fails the feed rather than corrupting it: a partition with no traffic never advances its own maximum, so the watermark freezes and output stops entirely. Either every partition emits a periodic idle marker carrying the broker's current time, or the watermark falls back to wall clock for a partition silent beyond a threshold.
Follow-up
- The lateness budget is raised to five minutes. What is the new buffer, and what besides memory changes?
- The consumer restarts. Where does it resume from, and what does the feed look like for the first 30 seconds?
Hold a per-tenant active cap against concurrent creates
A tenant on the standard plan may hold at most 50 resources with status='active'. The create handler runs SELECT count(*) FROM resource WHERE tenant_id = $1 AND status = 'active', compares to 50, then inserts. Two creates arrive 3 ms apart on different instances and the tenant lands at 51. Name the anomaly, say whether PostgreSQL 16 READ COMMITTED or REPEATABLE READ prevents it and why, then give an implementation that holds the cap at READ COMMITTED with the exact statements. Finally, say what changes when the cap is 'at most one running export per tenant' on job_run.
Approach
- Name it: write skew. The two transactions read an overlapping set and write disjoint rows, so there is no row-level conflict for the engine to detect and each commit is individually legal.
- Rule out the levels precisely. READ COMMITTED takes a fresh snapshot per statement and takes no lock on the counted rows, so both see 49. PostgreSQL's REPEATABLE READ is snapshot isolation: it removes non-repeatable reads and phantoms within the snapshot but still admits write skew, because the anomaly is not a re-read of a changed row, it is a read of a set that a concurrent transaction invalidates. Only SERIALIZABLE closes it, by tracking the read dependency and aborting one transaction with SQLSTATE 40001 — a guarantee that exists only if the application re-runs the whole transaction from the read.
- Convert the set predicate into a single-row conflict: keep tenant.active_resource_count and run UPDATE tenant SET active_resource_count = active_resource_count + 1 WHERE tenant_id = $1 AND active_resource_count < 50 in the same transaction as the INSERT. Zero affected rows is the cap, returned as 409. The row lock serialises the decision at any isolation level, and contention is bounded to one tenant's row — which is also the fair-scheduling unit, unlike a global counter that would convoy every tenant behind one row.
- State the cost you just took on: a counter is a second source of truth that can drift, so every path that changes status must adjust it inside the same transaction, and a periodic reconciliation has to exist, with resource_revision as the authority for what the count should have been.
Follow-up
- A resource moves from archived back to active. Which statements change, and what breaks if the counter update and the status change land in different transactions?
- The cap becomes plan-dependent and a plan can change mid-month. Where does the number 50 live, and who reads it?
Stop tag and share joins from fanning out a page
resource_tag is (resource_id, tag_id) with PK (resource_id, tag_id); resource_share is (resource_id, shared_with_user_id, permission). The tagged-and-shared listing inner-joins resource to both, filters tenant_id, tag_id = ANY($2) and shared_with_user_id = $3, orders by updated_at DESC and takes 50. Pages come back with fewer than 50 distinct resources and the total in the header is far too high. Explain the row multiplication, rewrite both the page query and the count query so each is correct, and name the index each one needs. PostgreSQL 16.
Approach
- Do the arithmetic against the predicates that are actually there. An inner join emits one row per matching child row, and both joins are filtered: tag_id = ANY($2) admits only the requested tags, shared_with_user_id = $3 admits one user's share rows. So a resource holding three of the requested tags and shared with $3 once yields three rows, not one — the multiplier is its count of matching tags times its share rows for that single user, and that second factor is 1 unless the table admits duplicate (resource_id, shared_with_user_id) pairs. LIMIT 50 then limits rows rather than resources, and COUNT(*) counts pairs — the header is the product, not the population.
- Reject DISTINCT as the fix. It deduplicates after the product has been built, so the planner must materialise and sort the fanned-out set before the LIMIT can apply, and it leaves any SUM or AVG in the same select list wrong.
- Rewrite both filters as semi-joins, keeping resource as the only row source: AND EXISTS (SELECT 1 FROM resource_tag rt WHERE rt.resource_id = r.resource_id AND rt.tag_id = ANY($2)) and the same shape against resource_share. A semi-join stops at the first match per resource and preserves the driving index order, so ORDER BY updated_at DESC, resource_id DESC LIMIT 50 still stops after 50 rows.
- Count with the same predicates and no join at all: SELECT count(*) FROM resource r WHERE r.tenant_id = $1 AND r.status = 'active' AND EXISTS (...) AND EXISTS (...). Nothing multiplies a resource, so the number is the population.
Follow-up
- The filter changes from 'any of these tags' to 'all of these tags'. Rewrite it and state what it costs relative to the ANY form.
- A resource can be shared with the same user twice under different permissions. Does your count change, and should it?
Can you explain your process for ensuring code quality and maintainability in a team environment?
Can you explain your process for ensuring code quality and maintainability in a team environment?
Approach
- Clarify what is being asked and what a complete answer contains.
- State your assumptions explicitly before working the problem.
- Say what you would check first and why it is the highest-information step.
- Work from the requirement backwards to the design.
Follow-up
- What assumption would you test first?
- How would you know your answer was wrong?
Keep one tenant's bulk export from starving projection updates
The worker fleet runs about 600 jobs/second out of job_run, claimed under a lease and heartbeated while running. Most handlers finish under 200 ms; exports run for minutes. One tenant enqueues 50,000 exports. Design the scheduling so that tenant's exports slow down and nothing else does: the queue split, the concurrency caps and where they are enforced, the claim query, and the backpressure signal that stops accepting new work. State the in-flight worker count each class needs at its arrival rate, and what the cap costs the tenant that hits it.
Approach
- Do the concurrency arithmetic first, because it determines the pool shapes. Required in-flight work is arrival rate times service time: 600/second of 200 ms handlers needs about 120 workers, while one export per second at 180 seconds needs 180 on its own. The long tail dominates any pool it shares, so a single pool sized from the mean is consumed by exports while 50 ms projections queue behind them. That is head-of-line blocking, and adding capacity does not fix it because the ratio is what is wrong.
- Split by job class rather than by priority. Priority inside one pool still lets a running export hold its worker for the next four minutes - there is no preemption for a handler already executing. Separate queues and separate worker processes give each class a floor the other cannot take.
- Enforce the per-tenant cap inside the claim, not at enqueue. Claim with SELECT ... WHERE status='queued' AND run_after <= now() AND job_type=$1 ORDER BY run_after, job_run_id FOR UPDATE SKIP LOCKED LIMIT 1, restricted to tenants currently under their cap. Derive the running count from rows in status 'running' with a live lease rather than from a counter incremented at claim and decremented at completion: the derived count self-heals when a worker dies, and the counter leaks a slot every time one does.
- Make the ordering fair over tenants instead of over jobs. Strict FIFO with a cap still forces the claim to scan past 50,000 rows belonging to a capped tenant before it finds anyone else's work, so cost grows with backlog depth. Pick the tenant first from a small per-tenant queue-depth summary, then claim within that tenant, which makes the scan proportional to the number of active tenants instead.
Follow-up
- An export outruns its lease, so two copies run. What must the handler do to make the second copy harmless, and what does it write to guarantee that?
- With a cap of 4, the tenant's 50,000 exports now take hours. What do you tell them, and does the answer change if they are the largest tenant on the platform?
How do you approach debugging complex issues in a distributed system?
How do you approach debugging complex issues in a distributed system?
Approach
- Establish what changed and when, before forming any theory.
- Pick a bisection that eliminates candidates whichever way it turns out.
- Check the instrumentation before believing the symptom.
- Separate the trigger from the cause; the deploy is rarely the bug.
Follow-up
- What would you look at first, and what would it rule out?
- How would you tell a cause from a coincidence here?
Built from the rounds and topics Navitus Health Solutions candidates report.
Prepare, practise & reflect
One practical outcome each day. Spend longer where you need it.
0 / 7 done01Map the Navitus Health Solutions loop
- Write out the reported sequence: Screening Call, Technical Evaluation.
- For each round, write one sentence on what it is judging, from the description above, and mark the one you are least ready for.
Deliverable: A one-page map of the 2 reported rounds, with the weakest marked.
02Work Application Systems (Enterprise Apps)
- Spend the session on Application Systems (Enterprise Apps), which Navitus Health Solutions candidates report being tested on.
- Write one worked example in Application Systems (Enterprise Apps) and time yourself on it.
Deliverable: One timed worked example in Application Systems (Enterprise Apps).
03Work Software Engineering (Role Fit)
- Spend the session on Software Engineering (Role Fit), which Navitus Health Solutions candidates report being tested on.
- Write one worked example in Software Engineering (Role Fit) and time yourself on it.
Deliverable: One timed worked example in Software Engineering (Role Fit).
04Work Technical + Behavioral Interviews
- Spend the session on Technical + Behavioral Interviews, which Navitus Health Solutions candidates report being tested on.
- Write one worked example in Technical + Behavioral Interviews and time yourself on it.
Deliverable: One timed worked example in Technical + Behavioral Interviews.
05Answer out loud: Technical and Domain Knowledge
- Answer aloud, timed: How do you approach debugging complex issues in a distributed system?
- Answer aloud, timed: Can you explain your process for ensuring code quality and maintainability in a team environment?
Deliverable: Spoken answers to 2 reported Technical and Domain Knowledge question(s), under time.
06Answer out loud: Behavioral and Situational
- Answer aloud, timed: Tell me about a time you had to explain a complex technical concept to a non-technical stakeholder.
- Answer aloud, timed: How do you manage disagreements with team members regarding technical implementation?
Deliverable: Spoken answers to 2 reported Behavioral and Situational question(s), under time.
07Dry run for Navitus Health Solutions
- Run one full mock under time, then write down the two questions you most want to ask your interviewers.
Deliverable: A completed timed mock and two questions to ask.
Expand any day for tasks and deliverables. Your progress is saved on this device.
Behavioural rounds judge the decision you made and what it cost.
What is your experience with the specific tech stack outlined in the role requirements?
What is your experience with the specific tech stack outlined in the role requirements?
Approach
- Pick a story where you made the decision, not one where you watched it.
- State the situation in two sentences and spend the rest on the reasoning.
- Give the blast radius: what could have broken, and what you measured.
- Name the disagreement and how you resolved it with evidence.
Follow-up
- What would you do differently if you ran that again?
- How did you know your change caused the improvement?
How do you handle database optimization when dealing with large-scale healthcare data sets?
How do you handle database optimization when dealing with large-scale healthcare data sets?
Approach
- Pick a story where you made the decision, not one where you watched it.
- State the situation in two sentences and spend the rest on the reasoning.
- Give the blast radius: what could have broken, and what you measured.
- Name the disagreement and how you resolved it with evidence.
Follow-up
- What would you do differently if you ran that again?
- How did you know your change caused the improvement?
Describe a time you had to learn a new technology or framework quickly to meet a project deadline.
Describe a time you had to learn a new technology or framework quickly to meet a project deadline.
Approach
- Pick a story where you made the decision, not one where you watched it.
- State the situation in two sentences and spend the rest on the reasoning.
- Give the blast radius: what could have broken, and what you measured.
- Name the disagreement and how you resolved it with evidence.
Follow-up
- What would you do differently if you ran that again?
- How did you know your change caused the improvement?
Tell me about a time you had to explain a complex technical concept to a non-technical stakeholder.
Tell me about a time you had to explain a complex technical concept to a non-technical stakeholder.
Approach
- Pick a story where you made the decision, not one where you watched it.
- State the situation in two sentences and spend the rest on the reasoning.
- Give the blast radius: what could have broken, and what you measured.
- Name the disagreement and how you resolved it with evidence.
Follow-up
- What would you do differently if you ran that again?
- How did you know your change caused the improvement?
How do you manage disagreements with team members regarding technical implementation?
How do you manage disagreements with team members regarding technical implementation?
Approach
- Pick a story where you made the decision, not one where you watched it.
- State the situation in two sentences and spend the rest on the reasoning.
- Give the blast radius: what could have broken, and what you measured.
- Name the disagreement and how you resolved it with evidence.
Follow-up
- What would you do differently if you ran that again?
- How did you know your change caused the improvement?
Describe a situation where you had to pivot your approach due to changing project requirements.
Describe a situation where you had to pivot your approach due to changing project requirements.
Approach
- Pick a story where you made the decision, not one where you watched it.
- State the situation in two sentences and spend the rest on the reasoning.
- Give the blast radius: what could have broken, and what you measured.
- Name the disagreement and how you resolved it with evidence.
Follow-up
- What would you do differently if you ran that again?
- How did you know your change caused the improvement?
How do you prioritize tasks when working on multiple high-priority initiatives simultaneously?
How do you prioritize tasks when working on multiple high-priority initiatives simultaneously?
Approach
- Pick a story where you made the decision, not one where you watched it.
- State the situation in two sentences and spend the rest on the reasoning.
- Give the blast radius: what could have broken, and what you measured.
- Name the disagreement and how you resolved it with evidence.
Follow-up
- What would you do differently if you ran that again?
- How did you know your change caused the improvement?
What motivates you to work within the healthcare technology space?
What motivates you to work within the healthcare technology space?
Approach
- Pick a story where you made the decision, not one where you watched it.
- State the situation in two sentences and spend the rest on the reasoning.
- Give the blast radius: what could have broken, and what you measured.
- Name the disagreement and how you resolved it with evidence.
Follow-up
- What would you do differently if you ran that again?
- How did you know your change caused the improvement?
- 01
What is your experience with the specific tech stack outlined in the role requirements?
- 02
How do you handle database optimization when dealing with large-scale healthcare data sets?
- 03
Describe a time you had to learn a new technology or framework quickly to meet a project deadline.
- 04
Tell me about a time you had to explain a complex technical concept to a non-technical stakeholder.
How should I prepare for the technical portion of the interview?
Focus on reviewing your previous projects and be ready to explain the "why" behind your technical decisions. Practice articulating your thought process clearly, as the interviewers are as interested in your problem-solving approach as they are in the final answer.
Navitus Health Solutions Software Engineer candidate reports ↗What is the company culture like at Navitus Health Solutions?
The culture is professional and collaborative, with a strong emphasis on delivering value to patients. You should expect a team-oriented environment where communication and reliability are highly valued.
Navitus Health Solutions Software Engineer candidate reports ↗How long does the interview process usually take?
While timelines can vary, the process is generally streamlined. Expect a screening call followed by one or two rounds of technical/behavioral interviews. Always confirm the specific level of the role (e.g., Developer I vs. II) early in your communication with the recruiter to ensure you and the hiring team are aligned.
Navitus Health Solutions Software Engineer candidate reports ↗What topics does Navitus Health Solutions test in interviews?
Navitus Health Solutions interviews most often cover Communication Skills, Behavioral Interviewing, Business Intelligence (BI), Data Analysis, and SQL. The exact emphasis depends on the specific role you apply for.
Navitus Health Solutions Software Engineer candidate reports ↗Sources & methodology 3 sources ↗
No official company page is cited. Rounds and questions come from candidate reports and PracHub editorial material; each source shows the date it was read.
- 01Navitus Health Solutions Software Engineer candidate reports ↗
Company-reported rounds, questions and FAQ.
Candidate reports · Accessed 2026-09-22 - 02PracHub Software Engineer practice ↗
PracHub practice material, not company-reported.
PracHub page · Accessed 2026-09-22 - 03PracHub preparation framework ↗
PracHub preparation guidance.
PracHub page · Accessed 2026-09-22
Explore related engineering environments and compare the preparation focus.
Cognition Software Engineer Interview Guide
What Cognition asks Software Engineer candidates, from reported rounds and questions.
Vercel Software Engineer Interview Guide
Debugging practice for Vercel software engineer prep built on a reproduction you trust, narrowing to the smallest failing input, and changing one variable per run so the result stays attributable.
Together Ai Software Engineer Interview Guide
Failure-handling practice for Together Ai software engineer candidates: requests whose outcome a timeout leaves unknown, where a retry is safe, and deduplicating at the receiver instead of assuming exactly-once delivery.
Spotify Software Engineer Interview Guide
Timed practice for Spotify software engineer candidates who lose time to the clock: short problems taken end to end, then reviewed against a written rubric rather than a passing test run.