As a Software Engineer at NetBrain Technologies, you are at the heart of an organization dedicated to automating network management through advanced visual documentation and dynamic mapping. This role is not just about writing code; it is about building high-performance systems that simplify the complexity of modern enterprise networks. You will contribute to products that enable engineers to visualize, troubleshoot, and automate their infrastructure in real-time, directly impacting how global enterprises maintain their network health.
The work is technically demanding and requires a unique blend of software engineering fundamentals and network domain knowledge. Because the product operates at the intersection of application development and network infrastructure, you will be expected to understand how your code interacts with low-level network protocols, databases, and virtualization environments. This is a high-visibility role where your ability to translate complex network logic into scalable software solutions will directly influence the product’s success in a competitive market.
Remote Screening
reportedAn unlabelled round is first an information problem, and the cheapest information is free. Whoever schedules it can usually tell you how long it runs, who will be in the room and what they work on, whether you will be writing code and in what environment, and whether anything is being sent beforehand. Ask in writing so the answer is on record, then prepare for the two or three formats those answers still leave open instead of betting on one. What separates a strong candidate is not guessing right; it is having an opening that works whichever one it turns out to be.
What to demonstrate
- Whether you can start work from an ambiguous brief, since tolerating a vague scope without stalling is the same thing the job asks for
- Whether the questions you asked beforehand were ones that change your preparation, such as duration, medium and who is joining, rather than ones whose answers you could not have acted on
- Whether you adapt when the round turns out to be something other than what you were told, instead of spending the first ten minutes visibly recalibrating
How to prepare
- Send one short scheduling message asking four things: how long, who is joining and what they work on, whether you will be writing code and where, and whether to prepare anything in advance. Treat a vague reply as real information, since it means the round is loosely structured and you will be shaping it yourself.
- Write one opening that works in any of the formats still open: restate in your own words what you have been asked to do, then ask which of two directions is more useful to them. Say it aloud until it stops sounding recited.
- Set up for the two most likely formats before the call starts, with a blank editor in the language you would choose and a shared document you can type into, so a format surprise costs you nothing in the first minutes
On-site Interview
reportedWhere the day includes a partner from product, design or data, that conversation is weighted like the technical ones and prepared for least. They are deciding one thing: whether having you in the room makes their decisions cheaper. That means options with costs attached, not implementation detail and not "it depends". An estimate someone can plan against — a range, the assumption that would push it to the high end, and what you would drop to hit the low one — is worth more than a confident single number, which everyone present already knows is wrong.
What to demonstrate
- Whether an estimate comes as a range with the assumption most likely to break it, and states what a specific scope cut would actually buy
- Whether a technical constraint is handed over as a choice with consequences on their side, rather than as a verdict they have no standing to argue with
- Whether you establish what decision is on the table before proposing anything
- Whether risk is raised while it can still change the plan, with the trigger that would confirm it, instead of reported afterwards as a slip
How to prepare
- Take a project that shipped late and write the two-sentence warning you could have given three weeks earlier, naming what you would have needed decided at that point
- Rehearse one estimate out loud until it arrives in three parts: the range, the single assumption that would blow it, and the smallest thing you would cut to protect the date
- Rewrite an objection you have actually made — the "we can't do that" version — as two options with their costs, so the choice ends up with the person who owns it
Whiteboard Coding
reportedWhat this round decides is narrow: whether you can produce code that runs and is correct on inputs nobody showed you. An elegant solution that does not compile scores below a plain one that does, so write a correct brute force first, say out loud that you know its cost, and improve it with the working version still on screen. What separates strong answers is who finds the broken case. Trace your own code against an empty input, a single element, and duplicate keys before you say you are finished, because being told is far more expensive than noticing.
What to demonstrate
- Whether degenerate inputs get checked without being asked for: an empty collection, one element, every element equal, and the extreme value the input type allows
- Whether the complexity you state matches the code you actually wrote, including a sort or a copy sitting inside a loop
- Whether the finished answer is verified against the worked examples before you call it done, rather than assumed correct because the code reads correctly
How to prepare
- Take five problems you have already solved and, without running anything, write down what each returns for empty input, a single element, and all-duplicates. Then run them and count how many you predicted wrong.
- Drill the brute force as its own skill: on ten problems, write only the obviously-correct slow version and time how long it takes to get it passing. If that is more than a few minutes, that is what to practise, not the optimal version.
- Add a fixed last step before you submit anything, reading only the loop bounds and the initial value of each accumulator, which is where most off-by-one errors live
Technical Discussions
reportedMost of the time lost in this format is not lost to thinking. It goes to a standard-library call you half-remember, an off-by-one in a loop bound, and a debugging loop that mutates code at random until something passes. When output is wrong, stop re-reading the whole function: take the smallest input that reproduces it and walk the state through by hand, printing intermediates if the environment allows. Guessing at a fix without a failing case you understand is how a five-minute bug becomes twenty, and the clock does not pause while you do it.
What to demonstrate
- Whether you reach the right structure without a detour, and can write it from memory rather than only recall that one exists
- Whether overflow is considered where the language has fixed-width integers, since a signed 32-bit value stops at 2,147,483,647 and then wraps in Java, is undefined behaviour in C++, and does not arise in Python, whose integers grow instead
- Whether recursion depth is treated as a constraint on large inputs, given that CPython's default limit is 1000 frames and a deep recursion can exhaust the stack in any language where an iterative version would not
- Whether a failing case is isolated and explained before any edit is made to the code
How to prepare
- From an empty file and with no references open, implement the pieces you lean on most: a heap push and pop, an iterative DFS with an explicit stack, and a binary search whose midpoint is written lo + (hi - lo) / 2, which avoids the overflow that (lo + hi) / 2 can hit in a fixed-width integer type
- Time yourself on the ten library calls you look up most, such as sorting with a custom comparator, splitting and joining strings, and finding the next key at or above a value in an ordered map, until the lookup is gone
- Take a solution you know is broken and, before touching it, write one sentence naming the input, the expected value and the actual value. Repeat until you do it without deciding to.
Behavioral Interview
reportedThis round is deciding whether a change you make without supervision can be allowed to reach production. It is scored on what you knew at the moment you decided, not on how it turned out, so a story that opens with the result and works backwards reads as luck retold as judgement. Say what the options were, what you did not know, what you did to shrink the unknown before committing, and what you accepted as the worst plausible case. The detail that separates answers is a bound: how many users, how much data, and for how long, if you had been wrong.
What to demonstrate
- Whether the reasoning you give was available at the time you decided rather than after the result came in, since a story whose deciding evidence arrived later describes an outcome and not a judgement
- Whether you can put units on the exposure (users, rows, minutes of degraded service) and whether the containment you chose actually bounded it: a canary bounds the request path it fronts, while a background job writing to a shared table reaches every user regardless of which version served their requests
- Whether the reversal path existed before you shipped or was improvised during the incident, and whether it restores state or only stops further damage
How to prepare
- For your three largest changes, write down the one thing you would have had to be wrong about for it to fail, and what your best estimate of it was on the day you shipped. If you never held an estimate, that is the gap the follow-up questions will find
- Write the undo procedure for one of those changes as it existed at the time, then mark which steps restore data and which only stop new damage. Turning a flag off or reverting a deploy ends the new writes; rows already written come back only from a copy you kept, and a dropped column comes back empty unless something outside the schema holds the values
- Rehearse one story from the decision point forward and stop before the outcome, then have someone ask what you would do next. If the story only works with the ending attached, it is an anecdote rather than a decision you can defend
PracHub editorial advice for the preparation topics above.
Checking a quota with a select and then writing
Under read-committed isolation, two concurrent transactions both observe a count below the limit and both insert, so the limit is exceeded by exactly the concurrency. Repeatable read does not rescue it either: it provides a stable snapshot, and this is write skew, which snapshot isolation permits by design. The options are serialisable isolation, which detects the conflict and aborts one transaction with a serialisation failure and therefore obliges the caller to retry; a single statement with the predicate inside the write; or a constraint that makes the surplus insert fail outright. The reason this pattern survives review is that it is correct in every test that runs one request at a time.
Holding money in a floating-point type, or rounding it more than once
Binary floating point cannot represent 0.01 or 0.1 exactly, so sums drift and two code paths that should agree disagree by cents nobody can trace back. The fix is integer minor units or an exact decimal type end to end, with sub-cent rates expressed as scaled integers such as micro-units, because a per-request price genuinely is smaller than a cent. The second half of the trap is rounding position: rounding each line and then summing gives a different total from summing and rounding once, and half-up and half-even diverge systematically across many lines, so rounding must happen at one named place and every downstream reader must carry the rounded value rather than recompute it from quantity and rate.
Abandoning working code to chase the optimal solution
Get the straightforward version correct, state its complexity, and only then optimise, keeping the working version until the faster one passes the same cases. A correct quadratic solution with a stated path to linear beats a half-written optimal one that never ran.
Choosing a schema before the access patterns are known
Write the queries first, with their filters, sort orders, cardinalities and which ones sit on the latency-critical path, then design tables and indexes to serve them. An index nothing queries still costs write throughput and storage, and a hot query with no supporting index becomes a full scan that only hurts once the table is big.
Choose a category, try a prompt, then open its approach, worked solution or follow-up when you need it.
How would you implement a caching mechanism?
How would you implement a caching mechanism?
Approach
- Choose the data structure from the access pattern, not from familiarity.
- Restate the input: its shape, its size, and what is guaranteed about it.
- Walk one small example through your approach before writing the whole thing.
Follow-up
- Which test case would catch an off-by-one here?
- How does this change if the input no longer fits in memory?
Solve the knapsack problem using dynamic programming.
Solve the knapsack problem using dynamic programming.
Approach
- Choose the data structure from the access pattern, not from familiarity.
- Walk one small example through your approach before writing the whole thing.
- Restate the input: its shape, its size, and what is guaranteed about it.
Follow-up
- How does this change if the input no longer fits in memory?
- Which test case would catch an off-by-one here?
Given an array, find the index where the value is larger than all prec…
Given an array, find the index where the value is larger than all preceding values and smaller than all succeeding values.
Approach
- Walk one small example through your approach before writing the whole thing.
- State the target complexity and say which constraint rules the naive version out.
- Choose the data structure from the access pattern, not from familiarity.
Follow-up
- How does this change if the input no longer fits in memory?
- What is the worst case, and how likely is it on real data?
Explain the differences between pre-order, in-order, and post-order tr…
Explain the differences between pre-order, in-order, and post-order traversal in a linked list.
Approach
- Walk one small example through your approach before writing the whole thing.
- Name the brute-force solution and its complexity before improving on it.
- Restate the input: its shape, its size, and what is guaranteed about it.
Follow-up
- What is the worst case, and how likely is it on real data?
- Which test case would catch an off-by-one here?
Seal an hour under late data with bounded memory
Metering ingest reads 256 partitions at 10,000 to 40,000 events/second. Events carry occurred_at and ingested_at, and during a producer replay the gap between them is hours. Seal each UTC hour once no more than 50 parts per million of that hour's eventual quantity can still arrive, using memory that does not grow with the size of the replay. Define the watermark, the lateness parameter and how you measure it, the structure holding open hours, and the write that performs the seal. State what an idle partition does to your watermark.
Approach
- Two clocks, two jobs. Bucket by
occurred_at, because that is the hour the customer is billed for, and advance the watermark oningested_at, because that is what the fold has consumed and whatsource_max_ingested_atrecords. Conflating them is what makes late data invisible. - The global watermark is the min over partitions of each partition's committed
ingested_at, not the max: the fold is trustworthy only as far as the slowest partition. The consequence is that one idle partition pins the watermark forever and nothing seals, so an idle partition must promote its watermark to wall clock after a stated idle timeout, and that timeout becomes a correctness parameter, because a partition that is slow rather than idle gets sealed past. - Choose the lateness L from the measured distribution of
ingested_at - occurred_at, weighted by quantity rather than by event count. The target is 50 ppm of the hour's quantity, and a replay is rare in events while carrying disproportionate mass, so an event-weighted quantile picks an L that is comfortably wrong at exactly the moment it matters. - Measure that quantile in bounded memory. A Greenwald-Khanna summary gives epsilon-approximate quantiles in O((1/epsilon) log(epsilon n)) space; a t-digest costs more per merge but has relative error that tightens at the tails, which is the half of the distribution you are reading at p99.99. Keep a separate summary per tenant class, because one tenant's batch importer is not the population.
- Hold open hours in a min-heap keyed by
hour_start. When the watermark advances, pop every hour withhour_end + L < Wand seal it: O(log H_open) per advance and O(1) amortised per event to touch its bucket. Memory is open hours multiplied by distinct(tenant, workspace, sku)keys, so cap the number of simultaneously open hours and spill the oldest intousage_rollup_hourlyasstatus='open'with arevisionbump. While an hour is open the row is upsertable, so the store is your overflow. - The seal itself is a conditional write:
update ... set status='sealed', sealed_at=now() where status='open' returning .... Two sealers race on every restart, and the loser must see zero rows and stop rather than write a second value. After the seal, an event for that hour is not an upsert but an adjustment, andsource_max_ingested_atis what proves it arrived afterwards.
Worked solution 40 min
- Replay a day of events with a synthetic lateness distribution: 99.9% under two minutes, plus a 0.05% tail at four to six hours that carries 3% of total quantity.
- Compute the p99.99 lateness two ways, event-weighted and quantity-weighted, and put the two numbers side by side.
- Implement the min-heap of open hours with the watermark as the min over 256 partitions, then stall one partition for 20 minutes and observe what seals.
- Set the idle-partition timeout to 60 seconds, repeat the stall, and measure how much quantity arrives after the seal.
- Attempt the seal from two workers at once and confirm the conditional update lets exactly one through.
Follow-up
- A replay starts during the sealing window for a period you are about to close. What do you do, and what is the customer-visible consequence of each option?
- Your measured quantity-weighted p99.99 lateness is six hours and the invoice must be issued at 02:00 UTC on the first. How do you reconcile those two numbers?
- How would you detect that L has drifted before it costs you an hour's quantity?
Rebuild an hourly rollup with deduplication and late-arrival accounting
From usage_event (event_id, tenant_id, workspace_id, environment, sku, quantity numeric(20,6), idempotency_key, occurred_at, ingested_at), produce the values usage_rollup_hourly should hold for one tenant over one day: per (workspace_id, sku, hour_start) the deduplicated quantity_sum, event_count and source_max_ingested_at, bucketed by occurred_at. Duplicates share (tenant_id, idempotency_key). Also report, per hour, the running total across the day and the share of quantity that arrived more than two hours after the hour began. Write the query, and state which duplicates a daily unique index cannot catch.
Approach
- Deduplicate in its own CTE before any aggregation, because a SUM cannot be un-summed:
row_number() over (partition by tenant_id, idempotency_key order by ingested_at, event_id) = 1. Include the tiebreaker. Without it the surviving row is non-deterministic when two duplicates share an ingested_at, and a rollup described as deterministically recomputable then disagrees with itself between runs. - Bucket on occurred_at and nothing else, and pin the timezone explicitly.
date_trunc('hour', timestamptz)truncates in the session's TimeZone setting, so the same query run by a session set to a non-UTC zone buckets differently; use the three-argumentdate_trunc('hour', occurred_at, 'UTC')on PostgreSQL 16 or later, ordate_trunc('hour', occurred_at at time zone 'UTC') at time zone 'UTC'before that. Filterenvironment = 'production'explicitly, since metering covers three environments and billing covers one. - Aggregate to the grain with
sum(quantity),count(*)andmax(ingested_at). The last is not decoration: it is the watermark the row consumed up to, and without it there is no way to prove afterwards what a number did and did not include. - Compute the late share inside the dedup-and-aggregate step as a conditional aggregate,
sum(quantity) filter (where ingested_at > hour_start + interval '2 hours'), then divide by the hour's total. Compute the running total as a window over the already aggregated rows:sum(quantity_sum) over (partition by workspace_id, sku order by hour_start rows between unbounded preceding and current row). Running either over raw rows puts the duplicates back. - Answer the index question exactly. The unique constraint is on (ingested_day, tenant_id, idempotency_key), because a unique index on a partitioned table must contain the partition key. It therefore deduplicates only within one ingest day and admits a duplicate whose retry crosses midnight or whose replay runs a week later. That is why this CTE dedups across the whole window being recomputed, and why the dedup horizon is a correctness parameter rather than a retention cost.
- Keep the numeric type all the way through. quantity is numeric so the sums are exact; a cast to double precision anywhere in this pipeline reintroduces drift that surfaces only as a few unreconcilable cents per tenant per month, long after the query is out of anyone's mind.
Follow-up
- A dispute forces the same recompute over 40 days for one tenant. What changes about the dedup CTE's memory use and the chosen plan, and what would you do about it?
- Two runs a minute apart return different quantity_sum values for an hour that is already closed. Give two mechanisms that produce that, and the single query that distinguishes them.
- Express the same rollup incrementally so it does not re-scan the day each time the watermark advances. What does the incremental version stop being able to answer?
Migrate a live partitioned event table without blocking ingest
usage_event is range-partitioned daily on ingested_at, holds roughly 250M rows per day across 400 live partitions, and is written at 10-40k rows/second. Two changes are required: quantity must move from double precision to numeric(20,6), and a new environment column must become NOT NULL with a default of 'production'. Ingest cannot stop. Give the ordered plan, naming for each step the lock it takes, what that lock blocks, and roughly how long it is held. Identify the one step that cannot be rolled back cleanly once traffic depends on it.
Approach
- Classify the two changes before planning anything. Adding a column with a non-volatile default has been metadata-only since PostgreSQL 11, so it is cheap. Changing double precision to numeric is not binary-coercible, so
alter column ... typerewrites every partition under ACCESS EXCLUSIVE and rebuilds its indexes; on this volume that is hours of blocked ingest and is simply not an option, which is why the plan is expand-and-contract rather than one statement. - Expand: add
quantity_numeric numeric(20,6)andenvironmentwith its default on the parent. Both are catalogue-only but both take a brief ACCESS EXCLUSIVE that cascades to partitions, so run each withlock_timeoutset to a second or two and retry on failure. A queued ACCESS EXCLUSIVE request blocks every reader behind it, which is how a metadata-only change turns into an outage. - Dual-write: deploy producer code that populates both columns on every insert, and leave it running before anything reads the new column. This is the step that cannot be reverted cleanly. Once readers depend on quantity_numeric, reverting the writer leaves rows with a null there, and the gap is only discoverable by re-reading the old column, which the readers have stopped doing.
- Backfill older partitions in batches keyed on the primary key, oldest first, committing every few thousand rows with a pause between batches, and skipping the partition still receiving writes until it rotates. Each batch is an ordinary UPDATE taking row locks only. The cost is bloat and WAL rather than blocking, so watch dead tuples and let autovacuum keep pace instead of wrapping 400 partitions in one transaction.
- Make NOT NULL cheap with the three-step form:
add constraint ... check (environment is not null) not valid(brief ACCESS EXCLUSIVE, no scan), thenvalidate constraint(SHARE UPDATE EXCLUSIVE, scans while reads and writes continue), thenset not null, which from PostgreSQL 12 uses the validated check and skips its own full scan. Do this per partition, then on the parent. - Switch and contract: move reads to the new column behind a flag, verify over a full period that both columns agree on freshly written rows, drop the old column (metadata-only), and only then remove the dual-write. Any index on the new column goes on with CREATE INDEX CONCURRENTLY per partition, since CIC is not supported on a partitioned parent: create the parent index with ONLY, build each child concurrently, then ALTER INDEX ... ATTACH PARTITION until the parent index becomes valid.
Worked solution 45 min
- On a scratch cluster, build 10 partitions of 2M rows each and run a writer at a few thousand inserts/second.
- Run the naive type change and measure how long writes stall and how far ingest lag grows before killing it.
- Run the expand step with
lock_timeout = '2s'while the writer runs, and observe a clean lock timeout and retry instead of a pile-up of blocked readers. - Backfill in 5k-row batches and chart dead tuples and WAL generated per batch.
- Run the not-valid, validate, set-not-null sequence and confirm from
pg_stat_activityand timings that nothing held an exclusive lock through a full scan. - Add an index with CIC per partition plus ATTACH PARTITION and confirm the parent index reports valid only after the last attach.
Follow-up
- A CREATE INDEX CONCURRENTLY fails halfway through the partition list. What state is the table in, how do you detect it, and what do you run?
- The producer computes quantity itself. What happens to a request already in flight when the dual-write deploy lands, and does it matter?
- Give two queries that prove the backfill is complete: one cheap enough to run every minute, one authoritative.
Explain the BGP path selection process.
Explain the BGP path selection process.
Approach
- Fix the scope first: who calls this, how often, and what they do when it fails.
- State the consistency you need, and where you are willing to be stale.
- Name the read and write paths separately; they rarely have the same bottleneck.
Follow-up
- How does this behave when that dependency is down for an hour?
- What would you drop to keep the system up under load?
How do you troubleshoot common connectivity issues like VLAN tagging o…
How do you troubleshoot common connectivity issues like VLAN tagging or subnetting errors?
Approach
- Choose a partition key and say what query it makes expensive.
- Name the failure you are designing for, then the recovery path.
- Name the read and write paths separately; they rarely have the same bottleneck.
Follow-up
- What would you drop to keep the system up under load?
- How does this behave when that dependency is down for an hour?
Webhook fan-out with per-endpoint isolation and backoff
One domain event fans out to every matching subscription, producing a webhook_delivery row per (subscription_id, event_id, redelivery_seq). Peak unique event rate is 20k/second; attempts run five to ten times that once fan-out and retries are counted. One customer endpoint has returned 503 for six hours and its backlog holds days of events; every other customer must be unaffected. Design the delivery system: how a worker claims work, the backoff schedule, the per-endpoint circuit breaker, the queue partitioning, and whether you offer ordering per subscription. State the delivery guarantee in one sentence.
Approach
- State the guarantee first, because it determines the rest: at-least-once with a stable event_id, and the consumer documented as responsible for idempotency. Exactly-once over HTTP is not deliverable - the 200 can be lost after the customer has already committed - so any design that promises it is either lying or is really offering at-most-once.
- Partition work per subscription rather than into one global pool, with a concurrency cap per subscription. With a shared pool, the endpoint that has been dead for six hours consumes workers on retries that will fail, and every other customer's delivery latency rises: head-of-line blocking across tenants is the exact failure being designed against here.
- Claim by compare-and-set with a fencing token: UPDATE webhook_delivery SET status = 'in_flight', lease_token = $new, leased_until = now() + interval '60 seconds' WHERE delivery_id = $1 AND status IN ('pending','failed_retryable') AND (leased_until IS NULL OR leased_until < now()), and make the terminal write carry AND lease_token = $new so a paused worker's late write is rejected rather than overwriting a newer attempt. Find due work through the partial index on next_attempt_at WHERE status IN ('pending','failed_retryable'), so the scan is proportional to live rows rather than to the terminal rows that outnumber them by orders of magnitude.
- Use full jitter: sleep uniformly in [0, min(cap, base x 2^(attempt-1))]. Plain exponential backoff hands a recovering endpoint its entire backlog as one synchronised herd and knocks it over again; full jitter de-correlates it. Then check the schedule actually spans the retention you promise - with base 1 s and a 3,600 s cap, twenty attempts have an expected total elapsed time of only about 4.6 hours, so a twenty-four-hour promise needs roughly fifty-nine attempts or a larger cap.
- Trip a circuit per endpoint on consecutive failures or a failure ratio over a rolling window: stop dispatching, push next_attempt_at out or mark new deliveries dropped_circuit_open, and half-open with exactly one probe rather than a batch. Bound the backlog explicitly with a per-subscription cap or retention, and decide in advance whether a recovered endpoint receives six hours of events at full rate or a pointer telling it to fetch what it missed.
- Offer ordering only as an opt-in mode of one in-flight attempt per subscription, and price it honestly: with parallel attempts a retried event overtakes a newer one, so ordering requires serialisation, and serialisation means one slow endpoint blocks its own queue entirely. That converts a shared problem into that customer's own problem, which is the right place for it, but it is still a real cost.
Worked solution 35 min
- Compute the attempt rate: 20k unique events/second x mean fan-out x retry multiplier, and size worker pools and the per-subscription concurrency cap from it.
- Write the claim statement and the terminal write, and point at the clause that rejects a resumed worker's stale write.
- Tabulate the backoff for attempts 1 to 20 with base 1 s and cap 3,600 s, take the expected value of each full-jitter sleep as half its ceiling, and sum to get total expected elapsed coverage.
- Decide the policy for a subscription down six hours: events buffered, bytes held, and what the customer actually receives when it returns.
Follow-up
- The endpoint recovers. Does it receive six hours of events at full rate, and what does that do to it?
- Trace the exact code path by which an event belonging to one tenant could be signed and sent to another tenant's endpoint.
- A customer insists they never received an event your row marks delivered. What evidence do you have, and what does payload_digest let you prove?
Hourly rollups merge one hour and lose another
Reconciliation flags one tenant on one day. Summing usage_event.quantity by hour of occurred_at gives 24 non-empty hours, but usage_rollup_hourly holds 23 rows for that tenant, workspace and SKU, one of which carries roughly the sum of two adjacent hours. Other days reconcile exactly, and the affected date matches a civil-time transition. hour_start is documented as truncated to the hour in UTC. You have both tables, the rollup job source, and its runtime environment. Give an ordered checklist, the mechanism, and the correction path for a day that may already be sealed.
Approach
- Bisect by dimension until one cell explains the whole difference: tenant, then day, then SKU, then hour. A defect confined to a single transition date already rules out deduplication and late arrival, both of which are indifferent to which hour an event lands in.
- Read the truncation with its precondition stated: date_trunc on a timestamptz value is evaluated in the session TimeZone, not in UTC. If the job connects without pinning that setting, it inherits the server or container default.
- Follow that to the collision: in a zone that observes daylight saving, two distinct UTC hours map to the same local wall-clock label at the autumn transition, so both fold into one key under the unique constraint on (tenant_id, workspace_id, sku, hour_start) and their quantities sum into one row. At the spring transition a label never occurs and the row is simply absent.
- Confirm from data rather than from reading code: run the same aggregate twice, once with the session pinned to UTC and once with the job host zone, and check that the second reproduces the stored rollup exactly.
- Fix at the source by pinning the connection to UTC explicitly, or by truncating on occurred_at AT TIME ZONE 'UTC', rather than relying on a default that differs between a developer machine, CI and production.
- Correct according to status, not convenience: an open hour is recomputed with revision incremented, a sealed hour is frozen and the difference becomes an adjustment line on the next invoice with voided_by_line_id pointing at the line it reverses.
Follow-up
- The same job also emits a daily figure for a dashboard. Why can a correct hourly rollup still produce a wrong day, and what does the tenant's billing timezone have to do with it?
- How would you detect this class automatically rather than waiting for reconciliation, given that it only manifests twice a year per zone?
For someone who has spent the last few years shipping features and reading other people's code, and who has not solved a timed problem from a blank file in a long time. Five days rebuild the primitives and the patterns that sit on them, working from invariants rather than remembered solutions, and the last two attach that back to the rest of the loop.
Prepare, practise & reflect
One practical outcome each day. Spend longer where you need it.
0 / 7 done01Rebuild the primitives by implementing them
- Implement a dynamic array with doubling growth and an operation counter, then change the growth rule to add a fixed sixteen slots instead, and time both for n of ten thousand, a hundred thousand and a million. The fixed-increment version resizes n/16 times at O(n) each, so its total work is quadratic; doubling is what makes append amortised constant.
- Implement a hash map with separate chaining and a load-factor resize, then insert ten thousand keys engineered to land in one bucket and record what happens to lookup time, so that average-case O(1) becomes a claim with a stated precondition rather than a reflex.
- For dynamic-array append and hash-map insert, write down which cost is amortised rather than worst-case, which single operation pays the whole bill, and what a system with a hard per-operation deadline would have to do instead.
Deliverable: Two working implementations plus a timing table showing the input at which each structure's advertised complexity stops holding.
Practice prompt ↗Practice prompt ↗Worked solution ↗02Arrays under an invariant: two pointers, sliding window, binary search
- Solve longest-subarray-with-sum-at-most-K using a sliding window, then run it on an input containing negative numbers and watch it return the wrong answer: extending the window only moves the sum monotonically when every element is non-negative, and that precondition is the whole reason the technique works.
- Write the binary search that finds the first index satisfying a predicate rather than an exact value, put the loop invariant above the loop in a comment, and verify termination on the two inputs that break careless versions: the empty range, and a range where every element satisfies the predicate.
- Compute the midpoint as lo + (hi - lo) / 2 and write one line on why the obvious (lo + hi) / 2 is a genuine defect in a fixed-width integer type and a non-issue in a language with arbitrary-precision integers.
Deliverable: Three solved problems, each with its invariant written above the loop, plus one recorded input on which the sliding window is provably wrong.
Practice prompt ↗Practice prompt ↗03Sorting, heaps, and the greedy argument that has to be proved
- Solve one top-k problem three ways, by full sort, by a size-k heap, and by quickselect, then write the values of n and k at which each becomes the right choice, along with quickselect's quadratic worst case and why a randomised pivot makes that unlikely rather than impossible.
- Implement bottom-up heapify and count sift-down steps to confirm it does linear work rather than n log n, because most nodes sit near the bottom of the tree and therefore move only a short distance.
- Take interval scheduling by earliest finishing time and write the exchange argument out in full: given any optimal schedule, swapping in the earliest-finishing interval keeps it feasible and no smaller. Then construct the weighted variant where that same greedy fails and name what has to replace it.
Deliverable: A three-way top-k comparison with measured crossover points, one written exchange argument, and one counterexample to a greedy rule that looks almost identical.
Practice prompt ↗Practice prompt ↗04Recursion, memoisation, and the step to a table
- Take one problem with overlapping subproblems, such as edit distance or coin change, instrument the plain recursion with a call counter to show the blow-up, then add memoisation and re-count.
- Convert the memoised version to a bottom-up table and state the two properties you relied on: each subproblem's result depends only on its arguments, and the dependencies form a DAG you can enumerate in order.
- Rewrite one deep recursion with an explicit stack, then find the input length at which the original hits the interpreter's frame limit, which defaults to about a thousand frames in CPython, so you know when the rewrite is required rather than decorative.
Deliverable: One problem in three forms, naive, memoised and tabulated, with call counts for each and the input length at which recursion depth becomes the binding constraint.
Practice prompt ↗Practice prompt ↗Worked solution ↗05Graphs, where most of the work is choosing the traversal
- Implement BFS and DFS over one adjacency list, then answer for each which finds a shortest path in an unweighted graph and which you would use to detect a cycle in a directed graph, including why the in-progress versus finished distinction matters for the second.
- Implement topological sort by in-degree, feed it a graph containing a cycle, and confirm the failure signature is that fewer than V nodes come out rather than an exception, then note that the order it produces is one of several valid ones.
- Run a shortest-path search on a graph with a single negative edge weight and show the wrong answer, then write the precondition Dijkstra actually needs, non-negative weights, because it finalises a node's distance the first time that node is popped, and name the algorithm you would switch to and its own limit.
Deliverable: A small graph library with BFS, DFS and topological sort, plus two inputs that produce documented wrong answers under the wrong algorithm choice.
Practice prompt ↗Practice prompt ↗06One day for everything that is not an algorithm
- Sketch one system only to the depth a coding-heavy loop tends to reach: the endpoints, what the service stores, and the single query pattern that decides the schema. Stop at twenty-five minutes.
- Prepare the project answer for an interviewer who codes, which means rehearsing the two levels they push to: the specific thing you built, and why you chose that approach over the alternative they will name. Open with a number and be ready to say what it excludes.
- Prepare the answer to what you would do differently, choosing a real technical mistake with a specific fix rather than a complaint about process or staffing.
Deliverable: One design sketch at endpoint-and-schema depth, plus a project answer rehearsed to two levels of follow-up.
Practice prompt ↗Practice prompt ↗07Solve out loud, under time
- Do three timed problems at twenty-five minutes each in a plain editor with no autocomplete and no execution until the end, then tally separately the failures that were syntax and the ones that were approach, because those two numbers call for different fixes.
- Narrate one solution from the first sentence, stating the approach and its complexity before writing any code, and rehearse the sentence you will use when you realise mid-solution that the approach is wrong.
- Re-solve from blank the two problems you were slowest on this week and compare the times against the day they first appeared.
Deliverable: A recording of one fully narrated solution and a tally that separates syntax failures from approach failures.
Practice prompt ↗Practice prompt ↗Worked solution ↗Expand any day for tasks and deliverables. Your progress is saved on this device.
Engineers over-index on what they repaired. A stronger answer covers something you knowingly left broken: the alert you tuned down, the data inconsistency you documented instead of chasing, the cleanup you deferred past two quarters. Give the reasoning and the condition that would have reopened it, so it reads as a decision and not as neglect.
What is your ultimate career goal?
What is your ultimate career goal?
Approach
- Pick a story where you made the decision, not one where you watched it.
- State the situation in two sentences and spend the rest on the reasoning.
- Name the disagreement and how you resolved it with evidence.
Follow-up
- How did you know your change caused the improvement?
- What would you do differently if you ran that again?
Describe a situation where you had to explain a complex technical conc…
Describe a situation where you had to explain a complex technical concept on the spot.
Approach
- Pick a story where you made the decision, not one where you watched it.
- Name the disagreement and how you resolved it with evidence.
- State the situation in two sentences and spend the rest on the reasoning.
Follow-up
- What would you do differently if you ran that again?
- How did you know your change caused the improvement?
Disclose a cross-tenant webhook delivery to affected customers
An enqueue path took the subscription from one lookup and the payload from another. For nineteen minutes, webhook_delivery rows were created whose tenant_id did not match the subscription's tenant, and eleven payloads were signed and sent to four endpoints belonging to other customers. You hold payload_digest, delivery timestamps and response codes. Describe how you handle a disclosure of this kind: what the records prove, what they cannot prove, what you say before you know everything, the one code change that closes it, and which parts you personally drove.
Approach
- Bound the population before saying anything externally. The affected set is deliveries in the window where the event's tenant and the subscription's tenant differ; the ones that actually left are those with delivered_at set and a 2xx in last_response_code. Attempted and delivered are two different counts and a disclosure has to use the right one in the right sentence.
- Separate what the records prove from what they do not, and say both halves rather than the flattering one. They prove which payloads were signed, where they went, and — through payload_digest — exactly which bytes. They do not prove what the receiving system did with them, and they do not bound the window more precisely than your deploy timestamps do.
- Communicate on the facts you hold, with the scope stated as an upper bound: 'at most eleven payloads, four recipient endpoints, these fields, this window' is more useful and more honest than waiting a day for certainty. The field list matters more than the event count, because a customer cannot assess exposure from 'an event'.
- Name the code change precisely, because this class never originates in the delivery worker. Compare the event's tenant against the subscription's tenant at enqueue and again immediately before the payload is signed, and make the second comparison drop the delivery rather than log a warning. Say why one check is insufficient: the enqueue check protects against the bug you know about, the pre-signing check protects the boundary itself.
- Run the history question in parallel and say so: a query over historical deliveries for the same mismatch tells you whether this was nineteen minutes or a year, and you would rather find the second case yourself than have a customer find it after your disclosure.
- Split the response into workstreams with owners — recipients asked to delete, affected customers notified, the check landed with a test, history swept — and say which you personally drove and which you handed off. Claiming all four is not credible and claiming none is not ownership.
Follow-up
- The historical sweep finds two more instances from last year. What changes in what you have already told people?
- Who approves the wording, and what do you do when you are asked to soften the scope?
- A customer asks you to prove a redelivery contained the same bytes as the original. What do you show them?
- 01
What is your ultimate career goal?
- 02
Describe a situation where you had to explain a complex technical concept on the spot.
- 03
An enqueue path took the subscription from one lookup and the payload from another. For nineteen minutes, webhook_delivery rows were created whose tenant_id did not match the subscription's tenant, and eleven payloads were signed and sent to four endpoints belonging to other customers. You hold payload_digest, delivery timestamps and response codes. Describe how you handle a disclosure of this kind: what the records prove, what they cannot prove, what you say before you know everything, the one code change that closes it, and which parts you personally drove.
Is this an official NetBrain Technologies interview guide?
No. It is PracHub's own research and practice material for the Software Engineer role at NetBrain Technologies. Rounds and questions reflect what candidates have reported, not a process NetBrain Technologies has published, and they change over time. Confirm the current format and scope with your recruiter.
PracHub interview research ↗How much time should I dedicate to interview preparation?
Dedicate at least 2–3 weeks of focused study. Prioritize refreshing your networking protocols and practicing your coding speed on a whiteboard or paper.
PracHub interview research ↗What differentiates successful candidates?
Successful candidates demonstrate a balance of "hard" network knowledge and "soft" communication skills. Being able to explain your logic while solving a technical problem is just as important as the code itself.
PracHub interview research ↗Is the culture at NetBrain Technologies collaborative?
NetBrain Technologies is a fast-paced, results-oriented environment. While it is highly technical, team members are expected to be self-starters who can take ownership of their projects and communicate effectively with cross-functional teams.
PracHub interview research ↗What is the typical timeline from the first screen to an offer?
The process is generally efficient, often moving through all stages within 2–4 weeks. Stay responsive to recruiter communications to maintain momentum.
PracHub interview research ↗Sources & methodology 3 sources ↗
No official company page is cited. Rounds and questions come from candidate reports and PracHub editorial material; each source shows the date it was read.
- 01PracHub interview research ↗
PracHub editorial research into this company and role, maintained with this guide. Candidate-reported, not an employer publication.
PracHub page · Accessed 2026-09-22 - 02PracHub Software Engineer practice ↗
Cross-company practice questions for this role.
PracHub page · Accessed 2026-09-22 - 03PracHub interview preparation framework ↗
The framework the preparation plan follows.
PracHub page · Accessed 2026-09-22
