A Data Scientist at Ocean Network Express (ONE) plays a pivotal role in optimizing global container shipping operations through data-driven insights. You will be responsible for transforming complex logistical data into actionable strategies that improve efficiency, reduce operational costs, and enhance service reliability. Your work directly impacts how the organization manages global trade flows and responds to market fluctuations.
This role is both technically rigorous and strategically significant. You will often find yourself working at the intersection of predictive modeling and operational research, tackling challenges such as demand forecasting, route optimization, and capacity management. Success in this position requires a blend of technical proficiency in statistical modeling and the ability to articulate complex analytical findings to non-technical stakeholders across the global supply chain.
Technical Screening
reportedBefore anything else, this round is a reading test. You are given a small schema and a question phrased in business language, and most of the difficulty sits in the gap between them. Who counts as an active user, does a refunded order still count as an order, is that date column an event time or a load time. Weak answers start typing immediately and compute something precise about the wrong population. Strong ones pin the definition in one sentence, name the column that encodes it, then write the query. On a timed assessment with nobody to tell, write the definition in a comment anyway.
What to demonstrate
- Whether an ambiguous term becomes a specific column and filter before any computation happens
- Whether you read the schema for keys and cardinality rather than only for column names
- Whether the result answers the question at the grain it was asked at, per user or per session or per day
How to prepare
- Take three metrics you already use and write down the exact filter and exact grain behind each, then practise stating one of them in a single sentence out loud
- On a schema you have never seen, spend the first minute writing what one row of each table means and which key it is unique on, then predict which joins can duplicate rows
- Rehearse a version where the definition changes halfway through, and edit the query you have instead of starting over
Experience Discussion
reportedAn extra round usually exists because something is still open after the standard loop: a skill the earlier interviews did not sample, a level decision, or two interviewers who disagreed. It is rarely a rerun of what you already did well. Ask the recruiter who you are meeting, what function they sit in, and how long the session runs. That is an ordinary scheduling question, and the answer changes what you should prepare. What separates a strong candidate here is treating the round as a fresh evaluation with its own bar, rather than assuming earlier performance carries you through or sinks you.
What to demonstrate
- Whether you can answer well on ground the earlier rounds did not cover, without leaning on what you already said to someone else
- Consistency of the facts in your stories: the same sample size, timeframe, team size and scope of your own role as in earlier conversations
- How you handle an unfamiliar format live, including whether you ask what kind of answer is wanted before producing one
How to prepare
- Ask the recruiter for the interviewer's function, the length, and whether to expect a coding surface, a discussion, or a presentation. Preparing for a 30 minute conversation with a partner team is not the same work as preparing for a 60 minute technical block.
- Write out what each earlier round actually covered, then list the two or three areas nobody probed. That gap is the most likely subject of the extra round.
- Re-read the numbers in the project stories you have already told, so a second telling does not quietly contradict the first.
Analytical Assessment
reportedThis round decides whether someone can hand you a schema and a question and trust the number that comes back. Correctness under a clock is the bar, not clever syntax. The habit that separates strong from weak answers is checking the grain: after every join, know how many rows you expect and whether the count moved. Most wrong answers in this format are not wrong logic, they are a fan-out from a key that turned out not to be unique, or a filter applied before an aggregate when it belonged after. Say what you expect before you run it.
What to demonstrate
- Whether your row counts survive each join, and whether you notice on your own when they do not
- Deliberate handling of rows that fail to match, including whether the question needs an inner join or a left join with the non-matches kept and counted
- Whether NULLs are treated on purpose, given that a NULL compares equal to nothing and that COUNT of a column skips it
- Reaching a defensible answer inside the window instead of a refined one after it
How to prepare
- Take a two-table schema, write a join that fans out on purpose, then fix it by collapsing the many-side to one row per key before joining. Repeat until the fix is reflex rather than recall.
- Write a funnel as one query and print the distinct user count at each stage, then confirm each stage is a subset of the one above it rather than assuming it
- Do a few timed runs in a plain text box with no autocomplete and no formatter, since assessment editors often have neither
Cultural Fit Evaluation
reportedA handful of shapes account for most of what gets asked in this format: a ranking or deduplication inside groups, a running or rolling total, a period-over-period comparison, and a cohort tracked forward over time. Recognising the shape quickly is most of the speed here; deriving it from scratch while a clock runs is where the time goes. Know that a window function keeps every row while a GROUP BY collapses them, and know which one the question needs. If the exercise is in Python instead of SQL, the same shapes arrive as groupby with transform, shift and merge, and the same grain mistakes are available.
What to demonstrate
- Whether you reach the right construct without a detour, such as ROW_NUMBER over a partition to deduplicate instead of a self-join against a MAX subquery
- Whether you know what your window frame actually is, since adding ORDER BY inside OVER changes the default frame and silently changes a running total
- Whether the thing runs. A near-miss that throws an error scores below a plainer query that returns the right rows.
How to prepare
- Write each of the four shapes once from memory against a small schema and keep the working version somewhere you will reread it: dedupe with ROW_NUMBER, a running total, a month-over-month change with LAG, and a retention table
- Compute one running total twice on data with tied timestamps, once on the default frame and once with ROWS BETWEEN UNBOUNDED PRECEDING AND CURRENT ROW, and look at where the two disagree
- If Python is on the table, rebuild the dedupe and the running total with groupby and cumsum, then assert the two implementations return identical rows
Final Offer
reportedWhere a loop includes a partner from outside the data team, that conversation usually carries the same weight as the technical ones and gets the least preparation. The person opposite you will not follow a derivation and does not need to. They are working out whether having you involved would make their decisions better or slower. The failure mode is not being too technical. It is answering a question about a decision with a description of your method, leaving the translation to them. What they carry into the debrief is the sentence you handed them, not the analysis underneath it.
What to demonstrate
- Whether a statistical result arrives as something the partner could act on, with the one caveat that would change their decision kept and the rest left out
- Whether you can state what you need from their side, in their terms: instrumentation that does not exist yet, a definition they own, or a holdout they have to agree to
- Whether uncertainty is given as a range someone can plan against, rather than as hedging that invites them to ignore the result
- Whether you ask what decision is actually on the table before explaining anything
How to prepare
- Take a result you know well and write the version for someone who stops reading after one sentence, then the three-minute version, and check the short one is not the long one with the qualifications stripped out
- For a past project, list everything you asked a non-technical partner for and how you phrased it, then rewrite each ask so it names what goes unmeasured without it
- Practise saying where a result does not apply, out loud, in one sentence that a partner could repeat accurately to someone else
PracHub editorial advice for the preparation topics above.
Treating last-touch attribution as the causal value of a channel
The attribution label on dim_user is the output of a rule that assigns full credit to whichever touch happened to be recorded last inside a lookback window, and that rule systematically rewards channels that sit close to the conversion, especially branded search and retargeting, which largely intercept demand that already existed. Reallocating spend on those labels moves budget toward the channels that are best at being last, which is why attributed return on ad spend often improves while total signups do not. Nothing in the touchpoint data can settle this, because the counterfactual of not running the channel was never observed. The credible reads are a geo holdout or a scheduled pause, sized in advance on the total-signups metric rather than on the attributed one, and the honest framing in the meantime is that the label describes correlation with conversion and not incremental contribution.
Slicing a flat experiment until a segment reaches significance
Testing one metric across twenty segments at a nominal 5% level produces a significant result about two thirds of the time when nothing is happening anywhere, and the segment that surfaces is by construction the one with the most favourable noise. The reported effect in that slice is then badly overstated, because selection on significance conditions the estimate on being large. What makes it dangerous rather than merely wrong is that a post-hoc segment always has a plausible story attached, so it survives the meeting. The controls are declaring the small number of segments of interest before launch, correcting across the ones tested, and treating anything discovered afterwards as a hypothesis that needs its own adequately-powered test rather than a finding.
Answering a product-sense question with a list of features
Answer with a decision and the measurement that would settle it: the hypothesis, the primary metric, the guardrails, and the result that would make you not ship. A feature brainstorm cannot be wrong, which is exactly why it earns no points.
Defining the cohort on a post-treatment condition
Ask how rows entered the table. Filtering on something that treatment itself influences, such as users who finished onboarding or accounts still active at ninety days, breaks comparability between arms; define the population at an entry point that precedes exposure and keep everyone in it.
Choose a category, try a prompt, then open its approach, worked solution or follow-up when you need it.
How do you design an A/B test to evaluate a new pricing model?
How do you design an A/B test to evaluate a new pricing model?
Approach
- Check what information would not exist at prediction time, and exclude it.
- Say how the offline result would be validated online before it is trusted.
- Pick an evaluation metric that matches the cost of each error type, not a default.
Follow-up
- Where could label leakage enter this setup?
- What would you monitor after launch to know the model is still valid?
Sessionise an event stream with gap and midnight rules
Sessionise a raw event stream. Input: a DataFrame with visitor_id, user_id (often NULL), occurred_at_utc and event_name, unsorted, up to 5 million rows. A session breaks when the gap from that visitor's previous event exceeds 30 minutes, and is force-closed at UTC midnight so no session spans two calendar dates. A gap of exactly 30 minutes does not break. Emit one row per session with session_id, visitor_id, the user_id as of the last event in the session, started_at_utc, ended_at_utc, session_date, duration_seconds and event_count. Vectorise; do not loop per visitor.
Approach
- Sort by ['visitor_id', 'occurred_at_utc', 'event_id'] once, then express the whole problem as one boolean vector: a row starts a new session when the visitor changed, or the gap exceeds 30 minutes, or the UTC date differs from the previous row's UTC date. Cumsum that vector and you have the session key.
- Get the comparison direction right on the gap: the rule is strictly greater than 1800 seconds, so an event at exactly 1800 seconds continues the session. Write it as gap > pd.Timedelta(minutes=30), and make the tie a test case rather than an assumption.
- Derive the midnight break from the date change, not from inserting synthetic boundary rows. A date change implies a break even when the gap is two seconds, which is precisely the force-close rule and is why the two conditions are ORed rather than one subsuming the other.
- Aggregate with a single groupby on the session key: min and max of occurred_at_utc, size for event_count, and last for user_id, which is correct because the frame is already sorted so 'last' is the final event in the session. That is the identity-as-of-session-end rule.
- Compute duration_seconds as (max - min).dt.total_seconds(), which makes a single-event session 0 seconds. Say so explicitly, because a downstream mean session duration is sensitive to whether single-event sessions are 0 or excluded.
Follow-up
- Sessions are used as the denominator of a conversion rate. How does moving the inactivity gap from 30 to 45 minutes move that rate, and in which direction?
- A visitor's clock is 40 minutes ahead, so their events arrive with future occurred_at values. What does your sessioniser do, and what would you rather it did?
- The same person signs up mid-session on mobile and continues on desktop. How many sessions and how many users does your output show, and is that the right answer?
Implement seven-day activation from its written definition
Implement the seven-day activation rate. Inputs: dim_user with user_id, account_created_at_utc and is_internal; fct_event with user_id, occurred_at_utc and is_core_action. A user activates when core-action events carrying a non-NULL user_id fall on at least two distinct UTC dates inside [account_created_at_utc, account_created_at_utc + 7 days). The denominator is every non-internal user whose account_created_at_utc lands in the cohort week, including users with no events at all. Return one row per cohort week with numerator, denominator and rate, publishing only weeks whose last signup is at least eight days old.
Approach
- Build the denominator first, from dim_user alone, filtered on is_internal = False. Deriving it from the join is the standard way to lose every user who never fired an event, which is exactly the population the metric is about.
- Join events to users on user_id with a left join from the user side, then apply the window as a half-open interval: occurred_at >= created AND occurred_at < created + 7 days. The right bound is exclusive, so an event at exactly created + 7 days does not count.
- Count distinct UTC dates per user, not distinct events. Floor occurred_at_utc to date before the nunique, and do it in UTC rather than local time so the threshold does not move with the user's country.
- Apply the >= 2 threshold, aggregate to cohort week, and compute the rate by re-summing numerator and denominator per week rather than averaging any per-user or per-day rate. Fix the week anchor explicitly: cohort_week is the Monday of the signup week in UTC, which is what Postgres DATE_TRUNC('week') returns and what any SQL version of this metric will produce. In pandas, subtract dt.weekday days from the floored timestamp. If you reach for periods instead, the anchor that matches is to_period('W') (equivalently 'W-SUN'), whose weeks end Sunday and therefore start Monday; to_period('W-MON') labels weeks that end on Monday, so it runs Tuesday through Monday and its start_time is a Tuesday. Mixing the two shifts every cohort label by one day and silently moves Mondays into the previous week.
- Suppress immature weeks: drop any cohort week whose maximum account_created_at_utc is within 8 days of the data cut, and return them as absent rather than as a partial number.
Worked solution 30 min
- users = dim_user[~dim_user.is_internal].copy(); created = users['account_created_at_utc']; users['cohort_week'] = created.dt.floor('D') - pd.to_timedelta(created.dt.weekday, unit='D'), which is the Monday-start week. The period spelling that agrees with it is created.dt.to_period('W').dt.start_time; 'W-MON' does not agree and is off by a day.
- ev = events[events.is_core_action & events.user_id.notna()]; merge onto users on user_id with how='inner' for the numerator side only.
- Filter to the half-open window, add ev_date = occurred_at_utc.dt.date, group by user_id and count distinct dates, keep users with >= 2.
- numer = users.merge(activated_user_ids, how='left', indicator=True) then group by cohort_week and sum the indicator; denom = users.groupby('cohort_week').size().
- rate = numer / denom; drop weeks where users.groupby('cohort_week')['account_created_at_utc'].max() > data_max - 8 days.
Follow-up
- The threshold is 2 distinct days. What changes in the reported history if someone moves it to 3, and how would you publish that change?
- Invited seats and SSO-provisioned users have no pre-signup session. Should they be in this denominator at all, and what does including them do to the rate for sales-assisted accounts?
- How would you produce the same metric at account grain, and which of the two would you put on the dashboard?
Write a query to identify top-performing routes using SQL window funct…
Write a query to identify top-performing routes using SQL window functions.
Approach
- Handle the rows that do not match: a LEFT JOIN with a NULL check is usually the question.
- Check whether any join is one-to-many before aggregating, or the sums inflate.
- Say which table is the grain you start from, and join outward from it.
Follow-up
- What breaks if events arrive late or out of order?
- How would you verify this result without re-running the same query?
How would you perform a complex join to aggregate shipping volume data…
How would you perform a complex join to aggregate shipping volume data across multiple regions?
Approach
- Say which table is the grain you start from, and join outward from it.
- Compute rates by summing numerator and denominator separately, never by averaging rates.
- State the window function and its partition and ordering out loud before writing it.
Follow-up
- How would you verify this result without re-running the same query?
- How does the query change if the join becomes one-to-many?
Explain how you handle missing or null values when manipulating large …
Explain how you handle missing or null values when manipulating large datasets.
Approach
- Handle the rows that do not match: a LEFT JOIN with a NULL check is usually the question.
- Check whether any join is one-to-many before aggregating, or the sums inflate.
- Compute rates by summing numerator and denominator separately, never by averaging rates.
Follow-up
- How does the query change if the join becomes one-to-many?
- How would you verify this result without re-running the same query?
Rebuild sessions from raw events with a thirty-minute gap
From fct_event (event_id, visitor_id, occurred_at_utc) alone, rebuild sessions: a new session begins when the gap from that visitor's previous event exceeds 30 minutes, and every session is force-closed at UTC midnight so none spans two calendar dates. Return one row per session with visitor_id, session_start, session_end, event_count and session_date. Do not read fct_session; the point is to reproduce it. Assume duplicate occurred_at_utc values exist for the same visitor.
Approach
- Get the previous timestamp per visitor with LAG(occurred_at_utc) OVER (PARTITION BY visitor_id ORDER BY occurred_at_utc, event_id). The event_id tiebreaker is required, not stylistic: with duplicate timestamps an unstable ordering makes the boundary flags non-deterministic between runs.
- Set a boundary flag when prev IS NULL, or occurred_at_utc - prev > interval '30 minutes', or occurred_at_utc::date <> prev::date. The third disjunct is the midnight rule, expressed as a date change rather than a clock comparison so it holds across any gap length.
- Number the islands with SUM(flag::int) OVER (PARTITION BY visitor_id ORDER BY occurred_at_utc, event_id ROWS UNBOUNDED PRECEDING). Because event_id is unique the ordering is total, so no two rows are peers and RANGE UNBOUNDED PRECEDING would compute exactly the same numbers here. Write ROWS anyway: it is the half of the guard that survives someone later simplifying the ORDER BY back to occurred_at_utc alone, at which point the default RANGE frame gives every row sharing a timestamp one shared running total.
- GROUP BY visitor_id and the island number, then MIN(occurred_at_utc) AS session_start, MAX(...) AS session_end, COUNT(*) AS event_count, session_start::date AS session_date.
- Reconcile against fct_session on one sample day. The counts should agree except for server-emitted events carrying no client session, so a systematic difference beyond those is a bug in the gap rule or in the ordering.
Worked solution 30 min
- Pick one high-volume visitor and dump their ordered event timestamps for a day to trace by hand.
- Add LAG with the tiebreaker and eyeball the computed gaps.
- Add the three-part boundary flag and confirm the first event of each date is flagged.
- Add the running SUM with an explicit ROWS frame, then group and aggregate.
- Compare total event_count against the raw input count, and compare session counts to fct_session for the sample day.
Follow-up
- Why 30 minutes? What does a 5-minute rule do to sessions-per-visitor and to any per-session conversion rate?
- The same person uses phone then laptop. Two visitor_ids, two sessions. What breaks if you sessionise on user_id instead?
- The midnight rule splits an overnight session. Which metrics does that bias, and in which direction?
If a key performance indicator (KPI) declines unexpectedly, what steps…
If a key performance indicator (KPI) declines unexpectedly, what steps do you take to investigate?
Approach
- Decompose the metric into the rates that drive it, and say which one you would check first.
- Name one primary metric, then the guardrail that stops it being gamed.
- Restate the decision this analysis has to support, and who acts on the answer.
Follow-up
- Which segment would you cut first, and what would that rule out?
- What would you do if the primary metric and the guardrail moved in opposite directions?
How would you design a product metric to track the success of a new cu…
How would you design a product metric to track the success of a new customer portal?
Approach
- Decompose the metric into the rates that drive it, and say which one you would check first.
- Restate the decision this analysis has to support, and who acts on the answer.
- Fix the population and the time window before naming any metric.
Follow-up
- What would you do if the primary metric and the guardrail moved in opposite directions?
- Which segment would you cut first, and what would that rule out?
Explain the concept of statistical significance in the context of oper…
Explain the concept of statistical significance in the context of operational metrics.
Approach
- Name the randomisation unit first; it decides the variance and what the test can detect.
- Name the guardrails that would stop a launch even on a positive primary result.
- State the primary metric and the minimum effect worth shipping, then size the test.
Follow-up
- What would you do if you could not randomise at all?
- What would you conclude if the result is positive but the test is underpowered?
Describe common experimentation pitfalls and how you mitigate them.
Describe common experimentation pitfalls and how you mitigate them.
Approach
- Say whether units interfere with each other, and switch design if they do.
- State the primary metric and the minimum effect worth shipping, then size the test.
- Name the guardrails that would stop a launch even on a positive primary result.
Follow-up
- How would you handle interference between treated and control units?
- What would you conclude if the result is positive but the test is underpowered?
Define success for a rebuilt first-run onboarding checklist
A rebuilt first-run checklist ships to all new signups next month. You have dim_user (user_id, account_created_at_utc, signup_surface, is_internal) and fct_event (user_id, occurred_at_utc, is_core_action, event_name, surface). Propose a primary metric with an explicit numerator, denominator, window and publication lag, plus two guardrails and one diagnostic you would refuse to treat as success. The team wants a number it can read weekly, and the constraint is that everything must be computable from those two tables alone. Deliver the metric tree from the north star down to the metric you chose.
Approach
- Fix the grain and the cohort key first: the checklist is seen by users, so count on user_id with account_created_at_utc as the cohort key, and say out loud that the north star is account-grained so the tree crosses grains here deliberately rather than by accident.
- Take seven-day activation as the primary — core action on at least 2 distinct UTC dates inside [account_created_at_utc, +7 days) — because the two-distinct-days predicate cannot be satisfied by the single checklist-completion click the feature itself produces.
- Demote checklist completion rate to a diagnostic and give the reason: it is an output of the feature, so it is near-perfectly correlated with having shipped the feature and cannot fall when the feature is bad.
- Pick guardrails by the failure each one catches, not by what is easy to query: week-4 signup-cohort retention catches an activation gain that does not persist, and p50 minutes to first core action catches a checklist that adds steps to a path users already completed.
- State the operational rules explicitly: is_internal = FALSE, an 8-day publication lag, and signup_surface values 'invite' and 'sso_provisioned' split out because those users arrive through an administrator rather than a self-serve signup and may not be shown the checklist at all.
Worked solution 20 min
- Write the primary in full: numerator = cohort users with is_core_action = TRUE events on at least 2 distinct UTC dates in [account_created_at_utc, +7 days); denominator = all dim_user rows in the cohort week with is_internal = FALSE.
- Draw the tree downward: weekly active accounts completing a core action, then seven-day activation rate multiplied by weekly signups, then checklist step completion and time-to-first-core-action labelled as diagnostics.
- Attach the timing rules: 8-day lag, and a cohort with fewer than seven full elapsed days published blank rather than partial.
- Attach each guardrail to its named failure mode in one line each, so the guardrail list reads as a list of specific risks rather than a list of metrics.
- Write the exclusion rule and the surface split, and state what you would do if 'invite' users turn out to be a third of the cohort.
Follow-up
- Activation rises three points but week-4 retention is flat. What do you tell the team, and what would you need to distinguish a real gain from pulled-forward activity?
- The checklist ships on web only. What changes in the denominator, and what breaks if you leave every surface in?
- Signup mix shifted toward 'invite' the same week. How would you show whether the activation move was mix or behaviour?
Pooled signup conversion fell while every segment rose
Weekly visit-to-signup conversion, counted on distinct fct_session.visitor_id with is_bot_flagged = TRUE and consent_state = 'denied' sessions excluded, fell from 4.4% to 3.9% week over week. Split by device_type and referrer_channel, all twelve cells are flat or up. A paid_social campaign launched on Monday. Using fct_session and fct_event, quantify how much of the 0.5-point fall is mix and how much is within-segment rate, then state what you would tell the growth lead.
Approach
- Write the pooled rate explicitly as the sum over segments of weight times segment rate, and materialise both weeks' weights and rates into one table. Until that table exists there is nothing to decompose, only opinions.
- Compute three quantities and report all three: the rate effect holding the prior week's weights fixed, the mix effect holding the prior week's rates fixed, and the interaction residual. Reporting only the first two hides a term that can be material when both weights and rates move a lot.
- Rank segments by their individual mix contribution, computed as the change in that segment's weight multiplied by its prior-period rate. This is what lets you say one cell caused the move rather than gesturing at the campaign.
- Verify the new traffic is human and countable before accepting the mix story: check is_bot_flagged coverage on the new channel, the distribution of duration_seconds and event_count for its sessions, and whether its consent_state profile differs from the rest.
- Deliver the conclusion as a definition change rather than a diagnosis: a pooled rate over a mix that moves is not comparable week over week, so the recurring report should carry per-channel rates plus absolute signups, with the pooled figure demoted or dropped.
Follow-up
- Paid social converts at roughly a quarter of organic but absolute signups rose. Is the campaign working, and what would you need to answer that properly?
- Would you reach the same conclusion if the campaign had moved the mix by two points instead of sixteen? Where is your threshold and why?
- How would you present this to someone who has been watching the pooled number in a weekly meeting for a year?
For someone who has spent the last year in notebooks, dashboards or modelling work and has not written raw SQL under time pressure. The first four days rebuild query fluency against a fixture you control and can verify by hand; the last three attach that fluency to the rest of the loop.
Prepare, practise & reflect
One practical outcome each day. Spend longer where you need it.
0 / 7 done01Build a fixture you can check answers against
- Create a local Postgres or SQLite database with four tables (users, sessions, events, orders) holding roughly 200 rows you generated yourself, so you know the contents well enough to predict every result.
- Deliberately seed the cases that break queries: a user with no sessions, a session with no events, two orders sharing a timestamp, a NULL in one join key, and one duplicated user row.
- Before writing any SQL, hand-compute five answers on paper (how many users placed at least one order, median orders per ordering user, and three others) and save them as the ground truth for the week.
Deliverable: A one-command seed script plus a text file of five hand-computed answers to grade every later query against.
Practice prompt ↗Practice prompt ↗Practice prompt ↗Worked solution ↗02Joins, filters and NULL semantics
- Answer "which users have no orders" three ways (LEFT JOIN with IS NULL, NOT EXISTS, NOT IN) and confirm that the NOT IN version returns zero rows once the subquery contains a NULL, because the comparison is never TRUE.
- Reproduce the LEFT JOIN that silently collapses to an inner join by putting a right-table predicate in WHERE, then fix it by moving the predicate into the ON clause, and record both row counts.
- Create a fan-out bug on purpose by joining orders to order_items and summing the order total, then correct it with a pre-aggregated subquery and explain in one line which table changed the grain.
Deliverable: One annotated .sql file holding the three join traps, each with the wrong result and the corrected result side by side.
Practice prompt ↗Practice prompt ↗Practice prompt ↗03Window functions and frames
- Write three window queries against the fixture: a running order total per user, the rank of each order within its user by value, and the day gap to that user's previous order, then check each against the day-one ground truth.
- Run ROW_NUMBER, RANK and DENSE_RANK over a column containing ties, print all three side by side, and write one sentence on when each is the correct choice.
- Switch one query from the default frame (RANGE BETWEEN UNBOUNDED PRECEDING AND CURRENT ROW, which is what you get when ORDER BY is present and no frame is written) to ROWS BETWEEN UNBOUNDED PRECEDING AND CURRENT ROW, and explain why the output differs only when the ORDER BY column has duplicates.
Deliverable: Three verified window queries plus a short note explaining the RANGE versus ROWS difference in your own words.
Practice prompt ↗Practice prompt ↗04The four analytical query patterns
- Write a monthly retention grid: first order month per user, then months-since-first as the column, and verify that month zero equals the cohort size exactly.
- Sessionize the events table under a 30-minute inactivity rule using LAG plus a cumulative sum over a new-session flag.
- Build a four-step funnel that counts distinct users rather than events at each step, and state the rule you applied to a user who reaches step three without ever logging step two.
Deliverable: One file with the retention, sessionization and funnel patterns, each carrying a one-line note on the assumption it bakes in.
Practice prompt ↗Practice prompt ↗Worked solution ↗05Write SQL the way you will have to write it live
- Set a 12-minute timer and solve three medium prompts in a plain editor with no execution and no autocomplete, then run them and tally syntax errors separately from logic errors.
- Narrate one solution aloud while writing it, stating the grain of each intermediate result (one row per user, one row per user-day) before you type its body.
- Rewrite your slowest solution as a CTE chain where every CTE name states its grain, and time yourself re-solving it from blank.
Deliverable: A recording of one narrated solution plus an error tally that separates syntax from logic.
Practice prompt ↗Practice prompt ↗06One day for everything that is not SQL
- Write the preconditions of the two-sample t-test from memory, then check them: independent observations, and a difference in means whose sampling distribution is approximately normal, which at large sample sizes follows from the central limit theorem rather than from normality of the raw values.
- Write the difference between an odds ratio from logistic regression and a relative risk, and state the condition under which the two are close (low outcome prevalence).
- Prepare a 90-second answer to "how would you know this model is any good" that names the metric, the baseline you would beat, and the cost of the errors you care about.
Deliverable: One page of notes covering test preconditions, the odds-ratio caveat and the model-quality answer.
Practice prompt ↗Practice prompt ↗07Full loop rehearsal
- Run a 45-minute mock with someone willing to interrupt: 20 minutes of SQL, 15 minutes defining a metric, 10 minutes on a past project.
- Re-solve from blank the two queries you were slowest on this week and compare the times against day five.
- Write a five-line answer to "walk me through a project" that puts a number in the first sentence and names the decision the work changed.
Deliverable: Mock feedback notes plus a timed project narrative you can deliver without reading it.
Practice prompt ↗Practice prompt ↗Worked solution ↗Expand any day for tasks and deliverables. Your progress is saved on this device.
Sometimes the honest read is that the initiative did not work, and the person who commissioned the analysis was hoping otherwise. Interviewers want to know whether you softened it. Prepare the case where you delivered an unwelcome result, how you presented the uncertainty without hiding behind it, and what the team did next.
Describe a time you had to explain a complex technical finding to a no…
Describe a time you had to explain a complex technical finding to a non-technical stakeholder.
Approach
- Close with what you would do differently, concretely.
- Pick a story where you drove the decision, not one where you observed it.
- Quantify the outcome, including what you would not claim credit for.
Follow-up
- How did you know the outcome was caused by your change?
- What would you do differently if you ran that project again?
Handle a request for numbers supporting a decision already made
A senior leader has already decided to sunset a plan tier and asks you for the analysis showing it is the right call. Accounts on that tier carry 6% of MRR at constant FX and have the highest licensed-seat utilisation in the book. The leader's support matters to your next review cycle, and the decision is being presented in four days. Deliver what you produce, what you decline to produce, and the exact sentence you will say in the meeting where the number appears on a slide.
Approach
- Recognise what is being probed: whether you can find the legitimate request inside an illegitimate framing instead of either complying or refusing on principle. The generic answer promises to push back; the strong one produces something genuinely useful and states its limits in the room, without ambushing anybody.
- Separate the decision from the justification. Sunsetting the tier may be correct for reasons the data does not hold, such as support cost, roadmap surface area or sales motion. What you decline is a one-sided document. What you produce is the case read both ways, which also happens to be more useful to the leader.
- Build the symmetric analysis: MRR at risk at constant FX, the share of affected accounts with a plausible migration path given seats_licensed and billing_term, the recovery rate assumed for that migration and where it came from, and the downside case in which high-utilisation accounts treat the sunset as a reason to re-evaluate the vendor entirely.
- Surface the inconvenient fact privately and early. The highest seat utilisation in the book is a retention signal, and the leader should hold it before the room does, so they can incorporate it rather than be caught by it.
- Agree the meeting sentence in advance with the leader, so that nobody is surprised. Something to the effect that the tier is 6% of MRR and its accounts are the most heavily used in the book, and that the case for sunsetting rests on cost and focus rather than on revenue. That is true, it supports the decision on its real grounds, and it stops the deck claiming the numbers endorse it.
- Decide your own line before you need it: what you will not put your name to, and that the route if asked anyway is your own manager rather than a confrontation in the meeting.
Follow-up
- The deck circulates with your analysis included and the downside case removed. What do you do, and by when?
- What changes if the honest analysis says the sunset is clearly the wrong call?
- How do you write the same memo when the leader is your skip-level and the meeting is tomorrow?
Turn an ambiguous onboarding question into a measurable metric
Two days before a planning review, a director asks whether onboarding is working. You have dim_user (account_created_at_utc, signup_surface, is_internal), fct_event (is_core_action, flow_id, flow_instance_id, event_name, occurred_at_utc, received_at_utc) and fct_session. No further meeting with the director is possible before you start work. Deliver three clarifying questions you would send in writing, the metric you will compute in the meantime with its numerator, denominator, window and exclusions, and one sentence naming the question you are deliberately not answering.
Approach
- Recognise what is being probed: whether you convert a goal into a computable predicate without stalling for requirements or guessing in silence. Listing clarifying questions is the generic answer; shipping a defensible default alongside them is the strong one, because the review is in two days and it will happen with or without you.
- Infer the decision behind the request. A question about whether onboarding works, arriving before a planning cycle, usually means whether to staff it next quarter. That points at a rate with visible headroom over several cohorts, not at a descriptive dashboard.
- Write the three questions so that each one changes the SQL. Which population, all signups or only self-serve from dim_user.signup_surface. What counts as working, reaching a core action or completing the onboarding flow_id. Against what bar, last quarter's cohorts or a stated target.
- Propose the default explicitly: seven-day activation on weekly signup cohorts. Numerator, users with is_core_action = TRUE events on at least two distinct UTC dates inside [account_created_at_utc, account_created_at_utc + 7 days). Denominator, the signup cohort with is_internal = FALSE. Publish with an eight-day lag, and state that the two-distinct-days threshold is a frozen choice rather than a discovery.
- Name the exclusion in the same breath as the number. The series shows whether users activate; it does not establish that onboarding caused the level, which needs a staged rollout or an experiment.
Follow-up
- The director replies that they meant the onboarding flow specifically, not activation. What changes in the query and in the caveats?
- Your cohort metric needs an eight-day lag and the review is in two days. What do you present, and how do you label it?
- Two of your three questions come back unanswered. Which one do you refuse to proceed without?
- 01
Describe a time you had to explain a complex technical finding to a non-technical stakeholder.
- 02
A senior leader has already decided to sunset a plan tier and asks you for the analysis showing it is the right call. Accounts on that tier carry 6% of MRR at constant FX and have the highest licensed-seat utilisation in the book. The leader's support matters to your next review cycle, and the decision is being presented in four days. Deliver what you produce, what you decline to produce, and the exact sentence you will say in the meeting where the number appears on a slide.
- 03
Two days before a planning review, a director asks whether onboarding is working. You have dim_user (account_created_at_utc, signup_surface, is_internal), fct_event (is_core_action, flow_id, flow_instance_id, event_name, occurred_at_utc, received_at_utc) and fct_session. No further meeting with the director is possible before you start work. Deliver three clarifying questions you would send in writing, the metric you will compute in the meantime with its numerator, denominator, window and exclusions, and one sentence naming the question you are deliberately not answering.
Is this an official Ocean Network Express interview guide?
No. It is PracHub's own research and practice material for the Data Scientist role at Ocean Network Express. Rounds and questions reflect what candidates have reported, not a process Ocean Network Express has published, and they change over time. Confirm the current format and scope with your recruiter.
PracHub interview research ↗How much time should I dedicate to preparing for the technical rounds?
Dedicate at least two weeks to reviewing core concepts like SQL window functions and A/B testing pitfalls. Focus on being able to explain your past projects in detail, as interviewers will probe your specific contributions.
PracHub interview research ↗Is the interview process mostly technical or behavioral?
It is a balanced mix. You will face rigorous technical questions about your projects and general data science concepts, but expect at least one round dedicated to your professional experience and how you operate within a team.
PracHub interview research ↗What is the best way to stand out during the interview?
Connect your answers to the business context of Ocean Network Express. Demonstrating that you understand how your analysis affects shipping efficiency or cost-saving will set you apart from candidates who only focus on the technical implementation.
PracHub interview research ↗Sources & methodology 3 sources ↗
No official company page is cited. Rounds and questions come from candidate reports and PracHub editorial material; each source shows the date it was read.
- 01PracHub interview research ↗
PracHub editorial research into this company and role, maintained with this guide. Candidate-reported, not an employer publication.
PracHub page · Accessed 2026-09-22 - 02PracHub Data Scientist practice ↗
Cross-company practice questions for this role.
PracHub page · Accessed 2026-09-22 - 03PracHub interview preparation framework ↗
The framework the preparation plan follows.
PracHub page · Accessed 2026-09-22
Explore related engineering environments and compare the preparation focus.
Fetch Rewards Data Scientist Interview Questions & Guide 2026
Product-sense practice for a Fetch Rewards data scientist interview: define a product and business analytics metric, pick its guardrails, and argue why a tempting alternative would mislead you.
1 digit technology Pvt Data Scientist Interview Questions & Guide 2026
Take-home style practice for data scientists preparing for 1 digit technology Pvt: a messy dataset, a fixed time budget, and a written analysis, reviewed for whether it states its assumptions and whether a reader could reproduce your number
xAI Data Scientist Interview Questions & Guide 2026
Communication practice for xAI data scientist candidates: turn an analysis into a recommendation, name the uncertainty honestly, and answer the follow-up a skeptical stakeholder will raise.
Windfall Data Scientist Interview Questions & Guide 2026
Data-quality drills for Windfall data scientist prep: survivorship and selection bias, leakage through time-ordered features, and extreme values where provenance decides the call. A logging fault or unit slip gets corrected or dropped; a ge