As a Data Scientist at Palo Alto Veterans Institute for Research (PAVIR), you will play a pivotal role in advancing healthcare quality improvement decisions across the Veterans Health Administration (VHA). This position is not merely about crunching numbers; it’s about transforming data into actionable insights that can significantly impact the quality of care delivered to veterans. You will be part of the Participatory System Dynamics (PSD) team, which is focused on enhancing decision-making processes through data-driven methodologies, ultimately aiming to improve outcomes within the largest integrated healthcare system in the United States.
In this role, your contributions will extend beyond traditional data analysis. You will engage in collaborative projects that require a multidisciplinary approach, interfacing with healthcare professionals, researchers, and stakeholders. You will be responsible for establishing robust data cleaning and coding processes, conducting statistical analyses, and delivering insights that inform peer-reviewed publications and grant submissions. The complexity and scale of the work present a unique opportunity to influence systemic change in healthcare practices, making this a critical and rewarding role within PAVIR.
Expect to engage with various datasets and technologies, driving innovative strategies that support healthcare professionals in making informed decisions. Your work will not only contribute to ongoing research but also directly enhance the lives of veterans by improving healthcare services, making this role both impactful and fulfilling.
Application Review
reportedWhoever runs this call is usually not a practitioner. They take notes, and a hiring manager skims those notes later, so the real question is whether your work survives being written down by someone outside the field. Test every project sentence against that: could a non-specialist repeat it correctly without knowing what a propensity score is? Carry a plain-language version of each project and one reason you want this particular role that you could not copy onto another application. Vagueness at this stage reads as inexperience, even when the underlying work was genuinely deep.
What to demonstrate
- Whether a non-specialist can restate your projects accurately, since their paraphrase is what reaches the hiring manager
- Whether your reason for wanting the role points at the work itself rather than the company's reputation
- Whether your language signals the level being screened for: what you decided yourself versus what you were handed
How to prepare
- Write a two-sentence, jargon-free version of each major project: the question nobody could answer, and the decision your work changed. Read it to someone outside data and have them repeat it back
- Point your 'why this role' answer at something concrete in the job description or the product surface you would be working on, and keep it to two sentences
- Have two questions ready about measurement: which metric the team is held to, and who acts on an analysis once it lands
Phone Screen
reportedData Scientist covers at least four different jobs: experimentation, product analytics, causal work on observational data, and applied modelling that ships into a system. A screening call is the cheapest place to find out which of them is being hired for, and doing that diagnosis openly reads as senior rather than fussy. Ask what the last few pieces of work on the team actually were, and roughly how a week splits between querying, modelling and stakeholder time. Then say which parts of that you have done and which you have not. Claiming the whole range is the fastest way to be caught one round later.
What to demonstrate
- Whether you can distinguish the flavours of the role and locate your own experience inside one of them honestly
- Whether you name what you have not done instead of stretching to cover every line of the posting
- Whether your hard constraints (notice period, location, work authorisation, level) surface now rather than at offer stage
How to prepare
- Map the last two years of your time into rough percentages across query writing, experiment design, modelling and stakeholder work, so a question about scope has a real answer
- Mark every responsibility in the posting as done, adjacent or new, and prepare one sentence for each adjacent item naming the closest thing you have actually built
- Decide which logistics are non-negotiable before the call so you can state them in one sentence rather than negotiating live
Technical Assessment
reportedMuch of what gets scored here happens out loud while you type. Nobody can see your reasoning inside a half-written query, so five silent minutes read as being stuck even when they are not. State the plan in plain language first: which tables, what grain you are aggregating to, and the one filter that defines the population. Then write it. The narration doubles as insurance, because a wrong plan gets caught early and cheaply while a wrong query gets caught at the end with no time left to redo it. A timed statistics section, where one exists, is a separate test with its own clock.
What to demonstrate
- Whether the query you write matches the plan you just described
- What you do with a hint, meaning whether the correction gets absorbed or the first approach gets defended
- Whether you can debug your own wrong output by reading the result set and naming which part of the query produced the anomaly
How to prepare
- Solve three problems while screen-sharing into a recording, then watch it back and mark every stretch longer than thirty seconds where you said nothing
- Practise compressing the plan into one sentence before typing, then check afterwards whether the finished query actually matched it
- Time yourself on statistics questions that carry a business reading, such as what a confidence interval does and does not claim, rather than re-reading notes without a clock
Behavioral Interview
reportedMost of the weight in this round sits on the disagreement questions. Data work routinely produces an answer someone senior did not want, and the interviewer is trying to learn what you do in that hour. Both failure modes are common: folding as soon as a director pushes back, and treating the pushback as ignorance to be corrected with a better chart. A strong answer usually contains a specific thing the other person knew that you did not, and describes how you found out whether it changed the conclusion.
What to demonstrate
- Whether you can state the other side's argument accurately before you explain why you disagreed
- What you treated as evidence during the disagreement, such as a rerun under their assumption or a holdout check, rather than persuasion technique
- Whether you distinguish being overruled from being wrong, and can give an example of each
How to prepare
- Write out one disagreement where you turned out to be wrong, and say what in the data misled you. Candidates prepare the story where they were right, and the follow-up asks for the other one.
- For your main disagreement story, be ready to say what result would have made you drop your position. If no such result exists, you were not arguing from the data.
- Practise stating the opposing position out loud in one sentence the stakeholder would accept, then continue the story.
Final Interview
reportedA loop is not scored one interview at a time. The people you meet compare notes afterwards, usually in a meeting you are not in, and the outcome turns on what each of them can say about you when asked. That rewards something other than survival: every room needs one specific thing worth repeating, and none of them can contradict another. The common way to lose is to tell the same project four times with different numbers in it, or to be uniformly fine in a way that leaves nobody with anything to argue for.
What to demonstrate
- Whether your account of a project survives being told twice, with the same scale, the same metric definition and the same numbers each time
- Whether each interviewer leaves with one concrete claim they could make on your behalf later, rather than an absence of complaints
- Whether a question you already answered in an earlier room gets the same answer at the same depth, without visible impatience
How to prepare
- Write a one-page fact sheet for your two or three main projects that fixes the numbers you will quote: rows of data, the metric as a single sentence, the effect you measured and how long the work took. Say them aloud from the sheet until they come out identical every time
- For each kind of room you expect, decide the one sentence you want that interviewer repeating in a debrief, then check during the mock that you said it outright instead of implying it
- Rehearse answering the same project question twice in one sitting, the second time as though you had not just answered it, because the thing that needs fixing is the flatness that creeps into a repeated story
Offer Discussion
reportedRounds outside the standard loop often open with something deliberately under-specified: a loose business problem, an open question about a product area, a dataset described in one sentence. The common failure is surveying, listing six plausible approaches and committing to none of them. The thing that separates a strong answer is scoping out loud. State what you are treating as the goal, name the metric you would move, say what you are choosing not to do and why, then take one path through to an actual answer. An interviewer can follow you down a narrow path. Nobody can grade a menu.
What to demonstrate
- Whether you turn an ambiguous prompt into a stated question with a measurable outcome before doing any work
- The judgement visible in what you cut, and whether you say why you cut it rather than silently dropping it
- Whether you land on a concrete recommendation with its caveat attached, rather than an unranked set of options
How to prepare
- Take three vague prompts, such as 'is this feature working', 'why did retention drop', and 'should we expand into a new segment'. For each, write one sentence of goal, one primary metric with its window, and two things you are explicitly not doing.
- Practise giving the recommendation first and the reasoning second, in five minutes. Loosely defined rounds are usually time-boxed, and an answer that arrives last often does not arrive.
- Keep a running assumption list as you talk, on paper or in the shared doc, so the interviewer can challenge one assumption instead of your whole answer.
PracHub editorial advice for the preparation topics above.
Immortal time in adherence, treatment, and enrolment definitions
Classifying members as adherent, treated, or programme-enrolled requires them to survive and stay covered long enough to accumulate the defining events. That guaranteed event-free interval is assigned to the exposed group, so the exposure looks protective for reasons that have nothing to do with the treatment. Adherence studies are the classic case: measuring 12-month proportion of days covered and then comparing mortality builds survival into the exposure definition. Use time-varying exposure or a landmark analysis with the classification window excluded from follow-up.
Treating clinical measurements as missing at random
A lab result, a vital sign, or a screening exists because someone ordered it, and ordering tracks suspicion of disease, visit frequency, and site workflow. Imputing the mean or dropping incomplete rows biases the population estimate and can flip the sign of an association, because the untested are systematically healthier or systematically disengaged. The presence indicator is often more predictive than the value, which is a warning sign rather than a feature win: a model that learns test ordering will not transfer to a site with different protocols.
Optimising accuracy on a heavily imbalanced target
State the base rate first, then choose the metric from the relative cost of a false positive against a false negative: precision and recall at the operating threshold, PR-AUC, or expected cost. At a 1 percent positive rate, predicting the majority class for everyone scores 99 percent accuracy and is worthless.
Reporting a p-value with no effect size or interval
Give the estimated difference with a confidence interval in the units the business cares about, then say whether that whole interval is worth acting on. A p-value only addresses whether you can rule out exactly zero; it says nothing about magnitude.
Choose a category, try a prompt, then open its approach, worked solution or follow-up when you need it.
Sessionise transfer chains into episodes, then count readmissions
encounter has encounter_id, patient_id, facility_id, encounter_type, admit_ts, discharge_ts, admission_type, discharge_disposition, is_planned_admission, principal_diagnosis_code. Chain acute-to-acute transfers into episodes of care: an inpatient encounter discharged as transfer_acute, followed by another inpatient encounter for the same patient at a different facility admitting within 24 hours of that discharge, belongs to the same episode. Then compute the 30-day unplanned readmission rate over episodes, excluding index episodes that are planned, that end in expired, hospice or against medical advice, or that are still open. Return encounter_id to episode_id, plus the rate.
Approach
- Restrict to inpatient encounters for the chaining step and sort by patient_id, admit_ts. Observation and emergency encounters are not acute inpatient stays and pooling them changes both the chain and the denominator.
- Build a boolean continues flag: the previous row is the same patient, its discharge_disposition is transfer_acute, its facility_id differs from this row's, and admit_ts minus previous discharge_ts is between 0 and 24 hours. Episode id = cumsum of the negation of that flag. This is the vectorised form of a sessionisation loop and is why the pattern generalises to any event stream.
- Collapse to episode grain taking first admit_ts, last discharge_ts, last discharge_disposition, and any() of is_planned_admission. The episode inherits its exit state, not its entry state, which is why a transfer chain ending at home is one home discharge rather than two transfers.
- Apply index exclusions at episode grain. Dropping episodes that end in death is not optional: a dead patient cannot be readmitted, so leaving them in inflates the denominator and depresses the rate for exactly the panels caring for the sickest members.
- For each surviving index episode, find the next unplanned acute inpatient episode for that patient admitting within 30 days of the index discharge_ts. Count events at episode grain, since one patient can contribute several index episodes. Report the raw rate and say plainly that it is not comparable across panels without risk adjustment, which is what the observed-over-expected form exists for.
Follow-up
- discharge_ts is null on an open stay in the middle of a chain. What does your flag do, and what should it do?
- A patient is transferred out and then back to the originating facility within 24 hours. Should that chain, and does your facility_id condition handle it?
- Is a readmission itself eligible to serve as a later index episode? Say what you chose and what the choice does to the rate.
Simulate how ignoring clustering inflates the false positive rate
Simulate a provider-level comparison with no true effect. 40 providers, 60 members each, a continuous outcome with total variance 1 and intraclass correlation 0.02. Randomise providers 20 to 20, not members. Over 5,000 replications, report the share of replications where a two-sample t-test run on all 2,400 individual observations, ignoring provider, returns p below 0.05. Report the same share when the unit of analysis is the 40 provider means. Then state how the first number follows from the design effect 1 + (m - 1) x ICC.
Approach
- Decompose the variance explicitly rather than tuning it: provider variance = ICC = 0.02, residual variance = 1 - ICC = 0.98. Draw u_j once per provider and e_ij per member, so the outcome is u_j + e_ij and the correlation between two members of one provider is 0.02 by construction.
- Randomise at the provider level. That is the entire mechanism: the treatment indicator is constant within a provider, so in any single replicate the provider intercepts are confounded with the arm, and the naive test reads that confounding as signal.
- Vectorise over replications with a (reps, providers, members) array. 5,000 x 2,400 normals is trivial in numpy, and a Python loop is what tempts people to cut replications to 500 and report a number with Monte Carlo noise of plus or minus 0.017.
- Predict the answer before running it: design effect = 1 + (60 - 1) x 0.02 = 2.18, naive standard errors are too small by sqrt(2.18) = 1.476, so the rejection rate at nominal 0.05 is about 2 x (1 - Phi(1.96 / 1.476)) = 0.18. Agreement between prediction and simulation is what makes the result a demonstration rather than an anecdote.
- Run the provider-mean analysis as the control. Recovering 0.05 there proves the generator is correct and isolates the failure to the analysis unit.
Worked solution 30 min
- Draw u with shape (reps, 40) from N(0, sqrt(0.02)) and e with shape (reps, 40, 60) from N(0, sqrt(0.98)); y = u[:, :, None] + e.
- Assign providers 0-19 to one arm and 20-39 to the other; because there is no true effect, a fixed split is valid and removes one source of Monte Carlo noise.
- Naive test: flatten each arm to 1,200 observations and compute a two-sample t statistic per replication with vectorised means and pooled variance.
- Cluster test: average within provider to 40 values, then run the same two-sample t on 20 versus 20.
- Report both rejection shares and compare the naive one against 2 x (1 - Phi(1.96 / sqrt(2.18))).
Follow-up
- How many providers would you need for 80 percent power on a 0.2 SD difference with 60 members each and this ICC?
- Cluster sizes are unequal in reality. The design effect approximation becomes 1 + ((1 + CV^2) x mbar - 1) x ICC. Which direction does that move your sample size and why?
- The intervention cannot be withheld from any provider. Sketch a design that still yields a defensible estimate.
Collapse claim versions before summing allowed amounts by member
You are given medical_claim_line as a pandas DataFrame: claim_line_id, claim_id, claim_version, frequency_code (1 original, 7 replacement, 8 void), member_id, service_start_date, procedure_code, allowed_amount, claim_status. Return total allowed_amount per member for service dates in one stated calendar month, counting each claim once at its surviving version and excluding any claim whose surviving version is a void. Multi-line claims must keep every line of that surviving version. Output columns: member_id, allowed_amount, sorted descending. Do not deduplicate on claim_id alone.
Approach
- Separate the two grains out loud before writing code: versions live at the claim level, dollars live at the line level. Every bug in this exercise comes from mixing them.
- Compute the surviving version per claim with a groupby transform of max over claim_version, then keep the lines whose claim_version equals that value. A transform keeps the frame at line grain, which a sort plus head(1) does not.
- Drop whole claims whose surviving version carries frequency_code 8. A void is not a zero-dollar line, it retracts the claim, so filtering rows rather than claims leaves the prior version's lines behind.
- Filter to claim_status 'paid' and state the assumption: denied, pended and reversed lines carry an allowed_amount that never became a liability, so including them overstates cost.
- Restrict service_start_date to the month boundaries, then groupby member_id and sum. Sort descending and return.
Follow-up
- A claim has versions 1, 7, 7 where the second replacement has fewer lines than the first. What does your code return and is that correct?
- How would you handle a claim whose lines span two calendar months at the boundary of the reporting window?
- The same logic has to run over 400 million lines in a warehouse. What changes, and what stays the same?
Report site activation to first randomization without hiding non-enrollers
study_site holds one row per (study_id, site_id): site_activation_date, which is NULL for a site selected but never activated, and site_status. study_subject_visit holds subject_visit_id, study_id, site_id, subject_id, randomization_ts (NULL for screen failures), visit_name, visit_number, actual_visit_date and visit_status, with one row per subject per protocol visit, so randomization_ts repeats across every visit of a randomized subject and a site that has screened nobody has no rows there at all. For one study_id and a stated data cut date, return per activated site the activation date, the first randomization_ts and the days between them, with activated sites that have randomized nobody still present. Add a study-level summary giving median days to first randomization and the share of activated sites with no randomization by day 90.
Approach
- Take the site universe from study_site, never from study_subject_visit. The visit table can only contain sites that have screened at least one subject, so a universe built from DISTINCT site_id there omits exactly the sites this metric exists to expose. Filter study_site to the study and to site_activation_date IS NOT NULL, then LEFT JOIN the per-site first randomization.
- Collapse the grain before aggregating anything on the visit side. The table repeats randomization_ts across every visit of a randomized subject, so any count taken at row grain is inflated by visits per subject. MIN(randomization_ts) per site is safe, COUNT is not.
- State the date boundary rule. randomization_ts is a timestamp and site_activation_date is a date, so a randomization at 23:40 local time can land on either side of a day boundary depending on the zone the timestamp is stored in. Cast once, deliberately, and say which zone.
- Use PERCENTILE_CONT(0.5) WITHIN GROUP (ORDER BY days) for the median and be explicit that it ignores NULLs, so it is a median over enrolling sites only. That is exactly why the non-enroller share is reported beside it rather than instead of it.
- Censor the day-90 denominator against the data cut. A site activated 40 days before the cut has not had 90 days to randomize, so it cannot be scored on that bar and belongs outside that denominator.
Follow-up
- The same site_id appears under two studies. What breaks, and what is the correct grain for this metric?
- Would you present this as a median, as a Kaplan-Meier curve of time to first randomization, or both, and what does the curve show that the median cannot?
- A site randomized one subject who withdrew at visit 2. Does that site count as enrolling here, and how does that differ from a randomized-and-retained measure?
Find inpatient encounters with no resulted lab during the stay
encounter holds encounter_id, patient_id, encounter_type, admit_ts, discharge_ts and facility_id. lab_result holds result_id, order_id, patient_id, encounter_id (NULL for outpatient standing orders), loinc_code, specimen_collected_ts, resulted_ts and result_status. Return every inpatient encounter discharged in 2025 with no final or corrected lab_result linked to it. A colleague wrote WHERE encounter_id NOT IN (SELECT encounter_id FROM lab_result) and got zero rows back. Say why, write the correct query, then say what changes when labs must instead be matched on patient_id with the specimen collected between admit_ts and discharge_ts.
Approach
- Name the mechanism rather than the symptom. x NOT IN (subquery) expands to x <> y1 AND x <> y2 AND ..., and a single NULL y makes that chain UNKNOWN, never TRUE. Since lab_result.encounter_id is nullable by design for standing orders, this query can only ever return zero rows.
- Rewrite as NOT EXISTS, or LEFT JOIN with an IS NULL filter. Both treat a NULL key as no match rather than as unknown. Adding IS NOT NULL inside the NOT IN subquery also works, but NOT EXISTS is the habit that survives someone making another column nullable later.
- Put the result_status predicate inside the correlated subquery or the ON clause, not in an outer WHERE. Outside, it turns the anti-join back into an inner join and an encounter whose only labs were cancelled disappears instead of qualifying.
- For the timestamp variant, match on patient_id with specimen_collected_ts inside the stay rather than resulted_ts. A specimen drawn an hour before discharge can result the next day, and anchoring on resulted_ts would wrongly call that stay lab-free.
- Restrict to encounter_type 'inpatient' and discharge_ts in 2025, and report open encounters with a NULL discharge_ts as a separate count instead of letting the filter swallow them.
Worked solution 20 min
- Demonstrate the cause: SELECT COUNT(*) FROM lab_result WHERE encounter_id IS NULL returns a non-zero number.
- Write the NOT EXISTS version with result_status IN ('final','corrected') inside the correlated subquery.
- Write the LEFT JOIN version with the same predicate in the ON clause and WHERE l.result_id IS NULL, then compare counts.
- Build the timestamp variant joining on patient_id with specimen_collected_ts >= admit_ts AND < discharge_ts.
- Report both counts side by side and explain which encounters differ between the two definitions.
Follow-up
- Write the LEFT JOIN form and say exactly where the result_status predicate must sit for the two forms to agree.
- How would you separate encounters whose only labs were cancelled from encounters with no lab rows at all?
- Some encounters carry member_id NULL because the person index did not match. What does that do to a payer-side version of this measure?
What steps would you take to validate your findings before presenting …
What steps would you take to validate your findings before presenting them?
Approach
- Decompose the metric into the rates that drive it, and say which one you would check first.
- State what result would change your recommendation, so the answer is falsifiable.
- Name one primary metric, then the guardrail that stops it being gamed.
Follow-up
- Which segment would you cut first, and what would that rule out?
- What would you do if the primary metric and the guardrail moved in opposite directions?
Describe a scenario where you had to derive insights from ambiguous da…
Describe a scenario where you had to derive insights from ambiguous data.
Approach
- Fix the population and the time window before naming any metric.
- Restate the decision this analysis has to support, and who acts on the answer.
- Decompose the metric into the rates that drive it, and say which one you would check first.
Follow-up
- Which segment would you cut first, and what would that rule out?
- How would you detect that the metric is being gamed rather than genuinely improving?
Given a dataset with missing values, how would you handle it?
Given a dataset with missing values, how would you handle it?
Approach
- Decompose the metric into the rates that drive it, and say which one you would check first.
- State what result would change your recommendation, so the answer is falsifiable.
- Restate the decision this analysis has to support, and who acts on the answer.
Follow-up
- What would you do if the primary metric and the guardrail moved in opposite directions?
- Which segment would you cut first, and what would that rule out?
How do you prioritize tasks when faced with multiple deadlines?
How do you prioritize tasks when faced with multiple deadlines?
Approach
- Fix the population and the time window before naming any metric.
- Restate the decision this analysis has to support, and who acts on the answer.
- State what result would change your recommendation, so the answer is falsifiable.
Follow-up
- Which segment would you cut first, and what would that rule out?
- How would you detect that the metric is being gamed rather than genuinely improving?
Explain the data cleaning process you follow and why it is important.
Explain the data cleaning process you follow and why it is important.
Approach
- State your assumptions explicitly before working the problem.
- Clarify what is being asked and what a complete answer would contain.
- Work from the decision backwards to the evidence you would need.
Follow-up
- What assumption would you test first?
- How would you know your answer was wrong?
Discuss the importance of data visualization in communicating your fin…
Discuss the importance of data visualization in communicating your findings.
Approach
- Say what you would check first and why it is the highest-information step.
- Work from the decision backwards to the evidence you would need.
- Clarify what is being asked and what a complete answer would contain.
Follow-up
- How would you know your answer was wrong?
- What assumption would you test first?
Estimate a programme effect at a fixed risk-score enrolment cutoff
Care management enrols members whose prospective_risk_score in member_enrollment crosses a fixed annual threshold of 1.75; above the line enrolment is near-automatic and below it unavailable, and about 85 percent of members above the line actually enrol. Leadership refused a randomised holdout and wants the programme's effect on next-year allowed PMPM. Two years of scores and claims are available. State the design, the estimand it identifies, the assumptions, and the diagnostics you would run before reporting anything.
Approach
- Propose a fuzzy regression discontinuity on prospective_risk_score at 1.75. Uptake jumps but is not complete, so the estimator is the ratio of the jump in outcome to the jump in enrolment probability at the cutoff, which is a Wald ratio.
- State the estimand honestly up front: a local effect for members near 1.75, who are the least sick enrollees. It does not identify the effect on the top risk decile, which is usually the number leadership actually wants, and saying so before the result lands is what keeps the analysis credible.
- Say explicitly why the obvious alternative fails. A pre-post on enrolled members selects on a high score in year one, and such cohorts regress toward the mean in year two whether or not anything is done, so a pre-post design reports savings every time. The discontinuity is immune because it compares members on either side of an arbitrary line.
- Specify the estimation: local linear fits on each side, triangular kernel, a data-driven MSE-optimal bandwidth, and robust bias-corrected inference rather than a naive local-linear confidence interval. Do not fit a high-order global polynomial.
- Run the falsification suite before looking at the effect: a density test for manipulation of the running variable, continuity of pre-determined covariates at the cutoff, sensitivity across bandwidths, and placebo cutoffs away from 1.75.
Worked solution 30 min
- Plot the outcome and the enrolment rate against the centred running variable in uniform bins to confirm a visible jump in both.
- Estimate the first stage (jump in enrolment probability at 1.75) and the reduced form (jump in next-year PMPM), then take the ratio for the fuzzy RD estimate.
- Select the bandwidth by an MSE-optimal rule with a triangular kernel and local linear fits, and report robust bias-corrected intervals.
- Run the density test at 1.75 and the covariate continuity tests on age, prior-year cost, dual_eligible_flag, and product_type.
- Re-estimate at 0.5x, 1x, and 2x the selected bandwidth, and at placebo cutoffs of 1.50 and 2.00.
Follow-up
- Risk scores are built from coded diagnoses, and coding intensity is something people can influence. What would manipulation look like in the density, and what do you do if you see it?
- The MSE-optimal bandwidth leaves 900 members. How do you decide whether to report an underpowered estimate at all?
- Design an encouragement version instead: randomise the invitation rather than enrolment. What does instrumental variables buy you, and which assumption is most at risk?
Glycemic control share jumped when a feed connected
The share of members with a controlled glycemic result moved from 0.62 to 0.81 the month a second result feed was connected. lab_result carries result_id, order_id, patient_id, encounter_id, loinc_code, analyte_name, value_numeric, units, reference_low, reference_high, abnormal_flag, result_status and supersedes_result_id. The metric is members whose latest result in the year is below the control threshold, divided by members with any result in the year. Decide whether control actually improved, and specify the metric so results from both feeds can be pooled.
Approach
- Split numerator and denominator. The denominator is members with any result, so a feed that tests more people changes the metric without changing anyone's health. Count denominator members before and after and see how much of the 19 point move is denominator growth.
- Recompute on a fixed cohort: members who had a qualifying result in both the before and after periods. If the share is flat on the fixed cohort, the movement is who got tested, not what their results were.
- Deduplicate to the latest non-cancelled row per (order_id, loinc_code), respecting supersedes_result_id, because a corrected result arrives as a new row and counting both gives one person two values.
- Audit units and loinc_code mix by feed. Two unit conventions coexist for this analyte, percent and mmol/mol, related by mmol/mol equal to 10.929 times (percent minus 2.15), so 7.0 percent is 53 mmol/mol. Comparing mmol/mol values to a percent threshold would classify them all as uncontrolled and depress the share, so a rise cannot be explained by that mismatch, which rules it out rather than in.
- State plainly that the tested population is not the covered population. Testing is ordered when someone suspects a problem or when a site runs standing orders, so the mean among tested members is not the population mean and cannot be made into one by imputation.
- Respecify: numerator and denominator both restricted to members with a stated continuous-enrolment requirement, one deduplication rule, one unit after conversion, one threshold, and a separately reported testing rate so the denominator's movement is visible.
Follow-up
- Someone proposes imputing the mean result for untested members. What happens to the estimate and why?
- A model you are building gains AUC from a feature that marks whether the test exists. Why is that a warning rather than a win?
- How would you report this metric so a clinical committee can see improvement separately from coverage of testing?
For a candidate whose interviews will centre on A/B testing, metric movement and causal claims. Design comes before arithmetic, arithmetic before analysis, and the week ends by rehearsing the readout rather than the derivation.
Prepare, practise & reflect
One practical outcome each day. Spend longer where you need it.
0 / 7 done01Design one test end to end on paper
- Take a single feature change and write the full design: randomization unit, the exact point of exposure, the primary metric with its grain, guardrails, allocation, planned duration, and the decision rule committed before any data exists.
- Write why the randomization unit must sit at or above the level where treatment can spill over, and give one case where user-level randomization is still contaminated (shared accounts or devices, or two participants in the same marketplace).
- State in advance what you will do if the primary metric is flat while a secondary metric is significant.
Deliverable: A one-page test design with a decision rule written before launch.
Practice prompt ↗Practice prompt ↗Practice prompt ↗Worked solution ↗02Power arithmetic until it is automatic
- Compute required sample size per arm for a binary metric with the normal approximation, n is approximately 2 times (z for alpha/2 plus z for power) squared times p(1 minus p) divided by delta squared, for baselines of 2, 10 and 40 percent at a 5 percent relative lift, and note that for a fixed relative lift the requirement falls as the baseline rises because delta grows proportionally with p.
- Redo the calculation for a continuous metric using variance in place of p(1 minus p), and show why a heavy-tailed quantity such as revenue per user needs either far more traffic or a capped version with a stated cap.
- Convert one of the results into weeks given a weekly eligible traffic figure, then list the two honest ways to shorten it (accept a larger detectable effect, or reduce variance) and write why quietly lowering the power target is a decision to miss more real wins, not a speedup.
Deliverable: A small script or sheet that maps baseline, minimum detectable effect, alpha and power to sample size and weeks, cross-checked against a published calculator.
Practice prompt ↗Practice prompt ↗Practice prompt ↗03Variance and the unit-of-analysis problem
- Take a ratio metric whose denominator is not the randomization unit (clicks per session, randomized by user) and compute the standard error twice, once naively at session level and once by the delta method or a user-level bootstrap, then record how much the naive version understates it.
- Implement CUPED on simulated data: choose a pre-period covariate X measured before assignment, estimate theta as Cov(Y, X) divided by Var(X), and analyse Y minus theta times (X minus its mean) in place of Y. Confirm the variance of the adjusted outcome equals the raw variance multiplied by one minus the squared correlation between Y and X, so a correlation of 0.45 removes about 20 percent of the variance and not 80.
- Now run that simulation a few hundred times and confirm the adjusted effect estimate is unbiased for the same effect rather than numerically identical to the raw one. Within any single run the two differ, sometimes by a large fraction of the true effect, because the two arms' pre-period covariate means never coincide exactly in a finite sample; they agree in expectation, which is the property that matters and the one to state out loud.
Deliverable: A notebook showing the adjusted estimator with a measurably smaller variance than the raw one, plus a repeated-simulation table showing the two estimators agreeing on average while differing run by run.
Practice prompt ↗Practice prompt ↗04Validity threats you can actually test for
- Run a sample ratio mismatch check as a chi-square goodness-of-fit test against the intended allocation, and write the three causes you would chase first (assignment logged before exposure, an arm-specific redirect or load failure, bot filtering applied asymmetrically).
- Simulate peeking: generate A/A data, test daily at alpha 0.05 across 14 looks, record the inflated false positive rate, then apply an alpha-spending boundary or commit to a fixed horizon and confirm the rate returns to nominal.
- Write how you would separate a novelty effect from a durable lift using the treatment effect plotted against days since first exposure, and what shape would change your recommendation.
Deliverable: One table showing the peeking false positive rate before and after correction, plus a written SRM triage list.
Practice prompt ↗Practice prompt ↗Worked solution ↗05When randomization is not available
- Write the identifying assumption for difference-in-differences (parallel trends in the absence of treatment), then plot pre-period trends for two candidate control groups and justify rejecting one of them.
- Design a switchback test for a change where user-level randomization would leak across participants, choosing a time-block length against the carryover you expect and saying how you would detect carryover in the data.
- List what an interrupted time series or a synthetic control buys you and the one thing neither can rule out: an unobserved shock that coincides with the launch.
Deliverable: A one-page memo recommending a single quasi-experimental design and naming its weakest assumption explicitly.
Practice prompt ↗Practice prompt ↗06The readout query
- Write the assignment-to-exposure join that returns exactly one row per unit per experiment, and handle units appearing in both arms by excluding and counting them rather than silently keeping one.
- Compute the per-arm metric, its variance and the relative lift with a confidence interval in SQL, then reproduce the identical numbers in a notebook as a cross-check.
- Add a segment breakdown and write the sentence that keeps it from being p-hacking: segments declared in advance, everything else reported as exploratory and corrected for multiplicity.
Deliverable: A single query that outputs the full readout table, matched to a notebook recomputation.
Practice prompt ↗Practice prompt ↗07Present it to someone who will not read the appendix
- Give a 10-minute readout of a real or simulated experiment in the order decision, number, uncertainty, caveat.
- Have your listener ask "can we ship it" in the case where the primary is flat and a guardrail moved, and answer with a recommendation rather than a request for more data.
- Rewrite your opening line so the recommendation lands before any methodology.
Deliverable: A one-page readout whose first line is the recommendation.
Practice prompt ↗Practice prompt ↗Worked solution ↗Expand any day for tasks and deliverables. Your progress is saved on this device.
An answer without a quantity is hard to interrogate, so interviewers keep probing until they find one. Come with the baseline, the change, the window it was measured over, and how confident you were. If the effect never got measured, say so and say what you would have measured. Fabricated precision is worse than an honest gap.
Give an example of a time when you had to influence a decision with da…
Give an example of a time when you had to influence a decision with data.
Approach
- State the situation in two sentences and spend the rest on your reasoning.
- Close with what you would do differently, concretely.
- Name the disagreement or constraint, and how you resolved it with evidence.
Follow-up
- How did you know the outcome was caused by your change?
- What would you do differently if you ran that project again?
If a stakeholder disagrees with your analysis, how would you address t…
If a stakeholder disagrees with your analysis, how would you address their concerns?
Approach
- Quantify the outcome, including what you would not claim credit for.
- State the situation in two sentences and spend the rest on your reasoning.
- Name the disagreement or constraint, and how you resolved it with evidence.
Follow-up
- How did you know the outcome was caused by your change?
- What would you do differently if you ran that project again?
Push back on an over-broad extract without blocking the work
A researcher asks for a one-off extract covering 12,000 members: member_id, date of birth, five-digit residential postal code, full lab_result rows including value_text, and clinical note text, held on their laptop for a retrospective analysis of one lab analyte over time. They describe it as de-identified because names are excluded. A flat refusal is not an acceptable answer. Deliverable: the column list you will actually provide with a justification per retained field, the sentence explaining why free text defeats an enumerated-identifier approach, your small-cell rule for the published stratification, and what you deliver this week.
Approach
- The probe is whether privacy is a design skill for you or a compliance reflex. Flat refusal and unquestioned fulfilment both fail, for opposite reasons.
- Reconstruct the analysis from the research question rather than from the request. A longitudinal trend in one analyte needs a stable pseudonymous subject key, the analyte's loinc_code, value_numeric, units, the reference bounds, and a date. It does not need names, notes, or a precise birth date.
- Replace each identifier with the least precise version that still answers the question: a salted per-study pseudonym instead of member_id, age in years or an age band instead of date of birth, a consistent per-subject date offset if only intervals matter, and a coarser geography than five-digit postal code.
- Explain the free-text problem in one sentence. Removing an enumerated list of identifier fields does not de-identify a note, because notes carry names, relationships, employers, dates and rare clinical detail in prose, so only a reviewed extraction into structured fields or a formal statistical determination addresses it.
- Set the publication rule before the analysis runs. Suppress cells below a stated threshold and suppress complements too, because a reader holding a row total and all but one cell recovers the suppressed count by subtraction.
- Keep them moving. Deliver the reduced extract into a controlled environment this week rather than onto a laptop, and offer to derive any note-based variable yourself as a structured flag so they never need the prose.
Follow-up
- They say the age band loses resolution their model needs. What do you do?
- How do you set the suppression threshold, and who signs off on it?
- The analysis later needs linking to a second data source. What changes?
- 01
Give an example of a time when you had to influence a decision with data.
- 02
If a stakeholder disagrees with your analysis, how would you address their concerns?
- 03
A researcher asks for a one-off extract covering 12,000 members: member_id, date of birth, five-digit residential postal code, full lab_result rows including value_text, and clinical note text, held on their laptop for a retrospective analysis of one lab analyte over time. They describe it as de-identified because names are excluded. A flat refusal is not an acceptable answer. Deliverable: the column list you will actually provide with a justification per retained field, the sentence explaining why free text defeats an enumerated-identifier approach, your small-cell rule for the published stratification, and what you deliver this week.
Is this an official Palo Alto Veterans Institute for Research interview guide?
No. It is PracHub's own research and practice material for the Data Scientist role at Palo Alto Veterans Institute for Research. Rounds and questions reflect what candidates have reported, not a process Palo Alto Veterans Institute for Research has published, and they change over time. Confirm the current format and scope with your recruiter.
PracHub interview research ↗How difficult is the interview process, and how much preparation time is typical?
The interview process can be rigorous, reflecting the complexity of the role. Candidates typically spend several weeks preparing, focusing on both technical skills and behavioral competencies.
PracHub interview research ↗What differentiates successful candidates?
Successful candidates demonstrate a strong combination of technical expertise, problem-solving abilities, and effective collaboration within team settings. They also show a deep understanding of how data drives decision-making in healthcare.
PracHub interview research ↗What is the culture like at Palo Alto Veterans Institute for Research?
The culture at PAVIR emphasizes collaboration, innovation, and a commitment to improving veteran care. Candidates who align with these values and demonstrate a collaborative spirit will thrive.
PracHub interview research ↗What is the typical timeline from initial screen to offer?
Candidates can expect a timeline of several weeks, with initial screenings followed by technical interviews and final discussions around fit and contributions.
PracHub interview research ↗Sources & methodology 3 sources ↗
No official company page is cited. Rounds and questions come from candidate reports and PracHub editorial material; each source shows the date it was read.
- 01PracHub interview research ↗
PracHub editorial research into this company and role, maintained with this guide. Candidate-reported, not an employer publication.
PracHub page · Accessed 2026-09-22 - 02PracHub Data Scientist practice ↗
Cross-company practice questions for this role.
PracHub page · Accessed 2026-09-22 - 03PracHub interview preparation framework ↗
The framework the preparation plan follows.
PracHub page · Accessed 2026-09-22
Explore related engineering environments and compare the preparation focus.
Veracyte Data Scientist Interview Questions & Guide 2026
Causal-inference exercises for Veracyte data scientist prep: difference-in-differences, matching, instrumental variables, and knowing when observational data simply cannot answer the question asked.
Zoetis Data Scientist Interview Questions & Guide 2026
Metric-diagnosis practice for Zoetis data scientist candidates: a number moves week over week and you work out why, splitting by segment, ruling out a logging or release change, and separating a mix shift from a real change in user behaviou
Vizient Data Scientist Interview Questions & Guide 2026
Communication practice for Vizient data scientist candidates: turn an analysis into a recommendation, name the uncertainty honestly, and answer the follow-up a skeptical stakeholder will raise.
Vibrant Emotional Health Data Scientist Interview Questions & Guide 2026
Case practice for the Vibrant Emotional Health data scientist interview, where the prompt is deliberately underspecified and your first move is scoping it into something measurable.