As a Data Scientist at Qimia, you will sit at the intersection of advanced analytics, data engineering, and strategic business application. Qimia prides itself on delivering high-impact, data-driven solutions that solve complex industrial and commercial challenges. You are not just building models in a vacuum; you are expected to translate raw data into actionable insights that directly influence product roadmaps and operational efficiency.
Your role is critical in bridging the gap between technical complexity and business value. You will collaborate closely with cross-functional teams, including Data Engineers and stakeholders, to ensure that the data pipelines you rely on are robust and that your models are scalable. This position offers a unique opportunity to work on diverse projects in Köln, requiring a mindset that balances rigorous scientific methodology with pragmatic, real-world implementation.
Candidates who demonstrate a deep understanding of the end-to-end data lifecycle—from ingestion to model deployment—consistently outperform others during the evaluation process.
Preparation focus
editorialNo round sequence has been reported for this company, so work the categories below and confirm the format with your recruiter.
What to demonstrate
- Breadth across SQL, experimentation and product reasoning
- Ability to state assumptions before choosing a method
How to prepare
- Drill the practice exercises below and time yourself
- Prepare three quantified stories about decisions you drove
PracHub editorial advice for the preparation topics above.
Slicing a flat experiment until a segment reaches significance
Testing one metric across twenty segments at a nominal 5% level produces a significant result about two thirds of the time when nothing is happening anywhere, and the segment that surfaces is by construction the one with the most favourable noise. The reported effect in that slice is then badly overstated, because selection on significance conditions the estimate on being large. What makes it dangerous rather than merely wrong is that a post-hoc segment always has a plausible story attached, so it survives the meeting. The controls are declaring the small number of segments of interest before launch, correcting across the ones tested, and treating anything discovered afterwards as a hypothesis that needs its own adequately-powered test rather than a finding.
Treating last-touch attribution as the causal value of a channel
The attribution label on dim_user is the output of a rule that assigns full credit to whichever touch happened to be recorded last inside a lookback window, and that rule systematically rewards channels that sit close to the conversion, especially branded search and retargeting, which largely intercept demand that already existed. Reallocating spend on those labels moves budget toward the channels that are best at being last, which is why attributed return on ad spend often improves while total signups do not. Nothing in the touchpoint data can settle this, because the counterfactual of not running the channel was never observed. The credible reads are a geo holdout or a scheduled pause, sized in advance on the total-signups metric rather than on the attributed one, and the honest framing in the meantime is that the label describes correlation with conversion and not incremental contribution.
Stopping an experiment the moment it crosses significance
Fix the sample size or duration before launch, or use a method built for continuous monitoring such as a sequential test, always-valid confidence intervals, or group-sequential boundaries. Repeatedly checking a fixed-horizon p-value against 0.05 pushes the real false-positive rate well above 5 percent.
Reading an observational correlation as a causal effect
Name the confounder you are most worried about and the design that would remove it: an experiment, a difference-in-differences with a checked pre-period trend, an instrument, or a regression discontinuity. When none is available, state which direction the bias likely runs and bound the claim accordingly.
Choose a category, try a prompt, then open its approach, worked solution or follow-up when you need it.
Explain the trade-offs between bias and variance in the context of you…
Explain the trade-offs between bias and variance in the context of your previous projects.
Approach
- Translate the result into the decision it informs, in one plain sentence.
- Write down the assumption the method needs before you use the method.
- Quantify uncertainty explicitly rather than reporting a point estimate alone.
Follow-up
- Which assumption here is most likely to be violated in practice?
- How would you explain this result to someone who does not know statistics?
Describe how you would evaluate the performance of a model beyond simp…
Describe how you would evaluate the performance of a model beyond simple accuracy metrics.
Approach
- Check what information would not exist at prediction time, and exclude it.
- Frame the prediction: the label, the moment of prediction, and the action it triggers.
- Pick an evaluation metric that matches the cost of each error type, not a default.
Follow-up
- How would you choose the decision threshold, and who owns that choice?
- Where could label leakage enter this setup?
What approach do you take when choosing between a complex deep learnin…
What approach do you take when choosing between a complex deep learning model and a simpler, more interpretable model?
Approach
- Set a baseline first, so any model has something honest to beat.
- Check what information would not exist at prediction time, and exclude it.
- Pick an evaluation metric that matches the cost of each error type, not a default.
Follow-up
- Where could label leakage enter this setup?
- How would you choose the decision threshold, and who owns that choice?
Can you explain how you would optimize a machine learning pipeline for…
Can you explain how you would optimize a machine learning pipeline for latency in a production environment?
Approach
- Set a baseline first, so any model has something honest to beat.
- Check what information would not exist at prediction time, and exclude it.
- Say how the offline result would be validated online before it is trusted.
Follow-up
- How would you choose the decision threshold, and who owns that choice?
- What would you monitor after launch to know the model is still valid?
Permutation test for a difference in conversion rates
Write a two-sided permutation test from scratch for a difference in conversion rates, using no scipy hypothesis function. Input: a DataFrame with unit_id, variant in {control, treatment} and converted in {0,1}, one row per randomisation unit. Compute the observed difference in proportions, then build the null distribution by reshuffling the variant labels while holding each arm's size fixed. Report the p-value as (1 + the count of permuted statistics at least as extreme in absolute value) / (B + 1) with B at least 10,000, and return the permutation distribution.
Approach
- Name the null being tested: the sharp null that each unit's outcome is the same under either label. That is what licenses permuting labels, and it is stronger than the null of equal means, which matters when someone asks whether the test is valid under unequal variances.
- Extract converted to a single numpy array of 0s and 1s and record n_treatment. Every permutation is then just a reshuffle of one array, and the treatment mean is the mean of the first n_treatment entries of the shuffled array.
- Vectorise the B permutations with rng.permuted on a tiled 2-D array, or with argsort of a (B, n) random matrix. A Python loop calling np.random.shuffle B times is correct but roughly an order of magnitude slower and often runs past the time limit.
- Use the +1 correction in both numerator and denominator. Without it a p-value of exactly 0 is reportable, which is false: the observed labelling is itself one of the permutations, so the smallest attainable p-value is 1/(B+1).
- Compare the resulting p-value against a two-proportion z-test as a sanity check. At these sample sizes they should agree closely; a large divergence means the statistic or the shuffle is wrong, not that the permutation test found something subtle.
Worked solution 25 min
- y = df['converted'].to_numpy(); n_t = (df['variant'] == 'treatment').sum(); obs = y[treat_mask].mean() - y[~treat_mask].mean().
- Build the null: for B draws, shuffle y and take the mean of the first n_t entries minus the mean of the rest.
- p = (1 + (np.abs(null) >= abs(obs) - 1e-12).sum()) / (B + 1), with the small tolerance so exact ties count as at least as extreme.
- Return obs, p and the null array; plot or describe the null to confirm it is centred at 0.
Follow-up
- The arms are 200 and 20,000 units. Does the permutation test stay valid, and what happens to its resolution at B = 10,000?
- Give a 95 percent confidence interval for the difference. Can you get it from this permutation distribution, and if not, what would you run instead?
- The randomisation unit is user_id but the outcome is per session. What breaks, and what is the fix?
Find reactivation gaps in account paid-period history
fct_subscription_period holds account_id, subscription_id, period_start_utc, period_end_utc, period_status and change_reason. A mid-period plan or seat change closes one row and opens another, so a single continuous paid tenure is often many rows, and an account may hold two overlapping subscriptions. Collapse rows with period_status in ('active','past_due') into continuous tenures per account, treating gaps of three days or less as continuous. Return account_id, tenure_start, tenure_end, and for every tenure after the first, the gap in days that preceded it.
Approach
- Filter to paid rows only: period_status IN ('active','past_due'). Trialing periods are not tenure, and including them turns every trial that never converted into a one-period tenure followed by a fake churn.
- Order by period_start_utc and take a running maximum of all prior ends: MAX(period_end_utc) OVER (PARTITION BY account_id ORDER BY period_start_utc, period_end_utc, subscription_id ROWS BETWEEN UNBOUNDED PRECEDING AND 1 PRECEDING). Those three columns are the only stable ordering this schema exposes, so check first that they are unique within an account; if rows tie on all three, the island numbering is order-dependent between runs and you need a real row key before the result is reproducible.
- LAG on its own is wrong here because with overlapping or nested periods the immediately preceding row by start date is not the one that ends latest, so the running maximum is the part that cannot be shortcut.
- Flag a new island when prior_max_end IS NULL OR period_start_utc > prior_max_end + interval '3 days', then number islands with a running SUM of the flag over the same ordering and an explicit ROWS frame.
- Group to (account_id, island) taking MIN(period_start_utc) and MAX(period_end_utc), then LAG(tenure_end) OVER (PARTITION BY account_id ORDER BY tenure_start) to compute the preceding gap in days for every tenure after the first.
- Sanity-check with change_reason, which is the only lineage this schema carries: list its distinct values first, then confirm that rows recording a plan or seat change sit inside a tenure rather than opening one, and that every tenure after the first opens on a row whose reason records a restart rather than an ordinary renewal. Do not reconcile against a churn timestamp on dim_account, which this schema does not define; and where such a column does exist, a cancellation timestamp records when the request was made and routinely sits weeks before the period it ends.
Worked solution 35 min
- Find an account with a known mid-period upgrade and dump its period rows to use as the trace case.
- Check that (period_start_utc, period_end_utc, subscription_id) is unique per account, since the whole ordering rests on it.
- Write the paid-rows CTE and the running MAX with the explicit frame.
- Add the island flag and the running SUM, then verify the trace account yields one island.
- Group to tenures and add the LAG-based gap in days.
- List the distinct change_reason values, then count accounts with more than one tenure and compare against the count of accounts carrying a restart-flavoured reason anywhere in their history.
Follow-up
- Why three days of grace? What do 0 and 30 days each do to the count of accounts classed as reactivated?
- An account runs two concurrent subscriptions for different teams. One tenure or two, and what does the revenue reader expect?
- How would you turn these tenures into a monthly gross logo churn series without double-counting an account that churned and returned in the same month?
Weekly visit-to-signup conversion split by acquisition channel
From fct_session (session_id, visitor_id, started_at_utc, referrer_channel, is_bot_flagged, consent_state) and fct_event (visitor_id, occurred_at_utc, event_name), compute visit-to-signup conversion for one ISO week, split by channel. session_id is the unique key of fct_session. Denominator: distinct visitor_id with a session starting in the week, is_bot_flagged = FALSE and consent_state <> 'denied'. Numerator: those visitors with a 'signup_completed' event in the same week. Label each visitor with the referrer_channel of their first session in the window. Return channel, visitors, signups and rate, plus one all-channel total row.
Approach
- Build a visitor spine that is one row per visitor: filter sessions to the week, drop is_bot_flagged and consent_state = 'denied', then take the first session per visitor with ROW_NUMBER() OVER (PARTITION BY visitor_id ORDER BY started_at_utc, session_id) = 1 to carry the channel label. Collapsing to one row here is what makes the channel buckets mutually exclusive and the totals additive.
- session_id is the unique key, so that ordering is total and the label is reproducible. If the table carried no unique key you would have to write an explicit tie rule instead, because two sessions on different channels at the identical timestamp would otherwise label the visitor differently between runs.
- Attach the outcome as a semi-join (EXISTS on a signup_completed event for that visitor inside the same week) rather than a join to the event table, so a visitor who fires the event twice does not count twice and inflate the numerator past the denominator.
- Aggregate with COUNT() as visitors and COUNT() FILTER (WHERE signed_up) as signups, and compute the rate as signups::numeric / NULLIF(visitors, 0) so an empty channel returns NULL rather than a division error.
- Produce the total with GROUP BY GROUPING SETS ((channel), ()), which re-sums numerator and denominator for the total row. Averaging the channel rates gives a different and wrong number whenever channel volumes differ, which they always do.
- Verify the spine before trusting the output: COUNT(*) must equal COUNT(DISTINCT visitor_id), and the per-channel visitor counts must sum to the total row.
Follow-up
- The denominator is distinct visitors. If a browser release shortens cookie lifetime, what happens to this rate, and how would you tell that apart from a genuine drop?
- A visitor's first session is direct and their signup session is paid search. Your label says direct. When is that the wrong answer for the decision being made?
- How do you roll four weeks into a month, and why is averaging the four weekly rates wrong?
Halve the runtime of a flat test with pre-period data
A test on 28-day core actions per user is powered for six weeks and the team will not wait. You have fct_event (user_id, occurred_at_utc, is_core_action) covering the period before each unit's first_exposed_at_utc in fct_experiment_exposure, and the pre-period count correlates with the in-experiment count at r = 0.6. Apply CUPED, state precisely how much runtime it buys, and handle the units with no pre-period because they signed up after the experiment started.
Approach
- Define the adjusted outcome: Y_cuped = Y - theta (X - Xbar), with theta = Cov(Y, X) / Var(X) estimated on the pooled sample so theta itself carries no treatment effect. It is unbiased because X is pre-exposure and therefore has equal expectation in both arms.
- Quantify the gain exactly: Var(Y_cuped) = Var(Y)(1 - r^2) = Var(Y) x 0.64, so 36% of the variance is removed. Required sample scales with variance, so six weeks becomes 3.8 weeks, and at the original sample the MDE shrinks by sqrt(0.64) = 0.8.
- State the precondition that actually bites: X must be measured strictly before first_exposed_at_utc, not before assigned_at_utc and not before the calendar start of the experiment. Any post-exposure information in the covariate lets the treatment effect leak in and biases the estimate rather than merely failing to help.
- Handle missing pre-periods as a stratum, never by dropping rows. Dropping changes the population; setting X to the pooled mean leaves those units' adjustment at zero, which is unbiased but buys them no reduction, so report the covered share and expect the blended reduction to fall short of 36%.
- Note that stratification is the same mechanism with a categorical covariate. Post-stratifying on device_type and referrer_channel removes the variance those stratum means explain, and it composes with CUPED provided the strata are also fixed before exposure.
Worked solution 30 min
- Build the covariate: for each unit_id in fct_experiment_exposure, count fct_event rows with is_core_action = TRUE and occurred_at_utc in [first_exposed_at_utc - 28 days, first_exposed_at_utc).
- Estimate theta on the pooled sample as Cov(Y, X) / Var(X), and confirm Xbar is statistically indistinguishable between arms before using it.
- Form Y_cuped = Y - theta (X - Xbar) and run exactly the test you would have run on Y.
- For units with no pre-period, set X to the pooled mean so their adjustment is zero, and report what share of the sample that is.
- Report unadjusted and adjusted estimates side by side, with the interval narrower on the adjusted one.
Follow-up
- Here the covariate is the same metric as the outcome. When would you deliberately pick a different one, and what is the risk if that covariate is itself affected by treatment?
- The point estimate moves by 0.4 standard errors when CUPED is applied. Is that reassuring or alarming, and what would you check?
- How does CUPED combine with cluster randomisation on account_id, and at which grain is the covariate built?
A surrogate for twelve-month value inside a three-week test
A monetisation change — an earlier and harder paywall — will be tested for three weeks. The decision quantity is twelve-month cumulative net revenue per acquired account, which cannot be observed in three weeks. Available: fct_event, fct_session, fct_subscription_period (mrr_cents_constant_fx, period_status, change_reason, is_first_paid_period), dim_account, and fct_experiment_exposure (unit_type, unit_id, variant, first_exposed_at_utc, is_in_analysis_population). Construct a surrogate index readable at three weeks, state the assumption that makes it valid, name the mechanism that breaks it, and give the pre-registered rule for refusing to decide. Deliverable: the index, the assumption, and the refusal rule.
Approach
- State the surrogacy condition before building anything: a surrogate is valid only if the treatment's entire effect on twelve-month revenue runs through it. Then say where it fails here, because a paywall moves short-run revenue directly and long-run revenue through churn and through who becomes a payer at all.
- Fit the index on history rather than on intuition: regress twelve-month cumulative net revenue per account on features observable by day 21 — first-paid flag, activation days, week-3 core-action days, seats billed — using cohorts old enough to have a twelve-month outcome, and hold out a later cohort.
- Report the out-of-sample fit as the headline rather than the point estimate: the held-out R-squared and the calibration of predicted against actual deciles are what license any use of the index, and a decile plot catches the mis-calibration an R-squared hides.
- Name the bias direction explicitly: the relationship was estimated under the old paywall, so under a harder paywall the marginal payer is a different person and the index over-predicts their value, biasing the treatment arm optimistic.
- Surround the index with the direct three-week readouts it cannot contain — revenue per exposed unit, cancel-within-first-period rate, and the free-side signup and activation counts — and pre-register a numeric refusal rule, because the failure mode of a surrogate is being used confidently in exactly the case it was not fit for.
Follow-up
- What evidence would make you trust a surrogate for this particular change rather than a different one?
- The index reads plus 8 percent while three-week cancel-within-period is up. Which do you act on, and what do you tell the decision-maker?
- How would you size this test, on what unit, and what does that do to the three-week horizon?
Size every candidate cause of a trial-to-paid decline
Trial-to-paid conversion on weekly trial-start cohorts from fct_subscription_period reads 3.1 points below the trailing eight-week mean for the three most recent cohorts. Three things happened in that window: a pricing experiment reached 50% of new trials, a payment processor migration added settlement delay, and paid_search spend tripled. Using fct_subscription_period, fct_experiment_exposure and dim_user, rank the causes by their contribution in points of the headline, state the remainder, and give the decision you would take on Monday.
Approach
- Kill the immature cohorts first, because everything downstream is computed on them. The metric is lagged by the trial length plus a 14-day conversion window plus a settlement allowance, and a processor migration lengthens exactly that last term; recompute each cohort at a fixed cohort age rather than as of today, and confirm the newest cohort's value is still climbing day over day.
- Hold the experiment analysis to the exposed population. Join fct_experiment_exposure on unit_id with is_in_analysis_population = TRUE rather than reading an assignment log, then check the variant split for a sample-ratio mismatch before believing any effect at all. Contribution to the headline is the variant effect multiplied by the exposed share, which is not the same number as the variant effect.
- Decompose the cohort mix by dim_user.first_touch_channel using the same weight-times-rate arithmetic as any other mix question, so the paid_search increase is sized as a weight change at a measured conversion rate rather than asserted from the spend figure.
- Convert all three to points of the headline, sum them, and print the residual against the historical week-to-week standard deviation of the metric. If the residual is inside that band, say so and stop looking; if it is outside, name what you would investigate next rather than leaving it implied.
- Land the decision. Only one of the three is actionable on Monday, so state whether the experiment has accrued enough exposed units to stop at the pre-declared horizon, and state separately what the settlement-lag correction does to the published series and its lag rule.
Follow-up
- How do you choose the fixed cohort age, and what do you lose by choosing it too long?
- If the pricing variant is genuinely 1.2 points worse, does that settle whether to stop it? What else is on the other side of that decision?
- The trailing eight-week mean spans the processor migration. What is the right baseline instead?
Four days spend equal time on query work, statistics, modelling and product judgement at deliberately shallow depth, which produces a scored map of where you actually stand. The last three days spend everything on the two areas the role weights most, and close by re-running day one to measure movement.
Prepare, practise & reflect
One practical outcome each day. Spend longer where you need it.
0 / 7 done01Breadth pass: query fluency
- Solve six prompts spanning aggregation, joins, window functions and date arithmetic in 60 minutes total, stopping at 10 minutes each whether or not it works, and mark every prompt as solved, solved slowly, or stuck.
- For each unsolved prompt write the single blocking sentence (I lost the grain, I did not know the frame clause, I could not express the date boundary) instead of reading the solution.
- Translate one pandas transformation you know well into SQL and one SQL query into pandas, checking that both return the same row count and the same totals.
Deliverable: A scored six-row table, one line per prompt, saved for the day-seven re-run.
Practice prompt ↗Practice prompt ↗Worked solution ↗02Breadth pass: statistics and inference
- Answer ten short questions in writing with nothing open: what a p-value is conditional on, what a 95 percent interval covers across repeated samples, when a paired test is the right one, what the bootstrap estimates, why multiple comparisons inflate false positives, how controlling the family-wise error rate differs from controlling the false discovery rate, what power depends on, what a missed real effect costs a product, the three situations where the central limit theorem does not rescue you (small n, very heavy tails, dependent observations), and what a standard error is the standard deviation of.
- Grade yourself against a reference and count only the answers that were exactly right, not the ones that were nearly right.
- Rewrite the two weakest answers the following morning from memory in full sentences.
Deliverable: Ten graded answers with an honest count of exact hits.
Practice prompt ↗Practice prompt ↗03Breadth pass: modelling
- Take one tabular dataset end to end in 90 minutes: a leakage-safe split, a baseline that is not a model (majority class or historical mean), one regularized linear model, one gradient-boosted tree, and a single evaluation metric chosen before you look at any result.
- Write why that metric fits the cost structure: precision at a fixed recall for alerting, calibration for anything feeding a price or a threshold, ranking metrics for retrieval, and note that area under the ROC curve is insensitive to class balance in a way that can flatter a rare-positive problem.
- Name the leak you were most likely to introduce (an encoding fit on all rows before splitting, or a feature computed after the label's timestamp) and write the check that would have caught it.
Deliverable: A notebook whose first cell states the metric and the baseline, plus two lines on what beat what and by how much.
Practice prompt ↗Practice prompt ↗04Breadth pass: product judgement
- Answer three case prompts aloud at 15 minutes each, timing how long passes before you state a success metric.
- For one case write the first segmentation you would run and the row counts you expect per segment, so that a tiny segment cannot quietly drive the conclusion.
- Take a metric definition you did not write, from a public dashboard, a textbook, or documentation you already have open, and list every place two analysts implementing it would diverge: which rows the denominator admits, whether the unit is an account or a person, what the time window is anchored to, and what happens to data that arrives late. Then write the one question that would close the largest of those gaps.
Deliverable: Three recorded case answers plus an ambiguity list for a metric someone else defined, ending in the single question you would ask about it.
Practice prompt ↗Practice prompt ↗Worked solution ↗05Depth, first area
- Rank the four areas by how many bullet points in the role description each one covers, pick the top one, and spend the entire day inside it.
- Work the six hardest problems you can find in that area and for each write the generalizable move you should have reached for first, rather than the answer.
- Re-solve the two you failed the same evening with notes closed.
Deliverable: Six generalizable moves written as instructions to yourself, not as solutions.
Practice prompt ↗Practice prompt ↗06Depth, second area, and the seam between them
- Repeat the depth protocol on the second-ranked area with the same six-problem structure.
- Construct one problem that requires both areas at once, for example a metric redefinition whose effect you must validate with a test whose readout you then have to query.
- Solve your own combined problem end to end and note where the handoff between the two areas cost you time.
Deliverable: One combined problem, solved end to end, with the handoff failure written down.
Practice prompt ↗Practice prompt ↗07Integration and re-measurement
- Re-run the six prompts from day one under the same clock and compare both correctness and time.
- Run a 60-minute mixed mock that moves between areas without warning, since switching cost is what breadth passes do not train.
- Write the two areas you would still fail on, and the sentence you will use in the interview when you hit one of them.
Deliverable: A before-and-after score table plus a written plan for the two remaining gaps.
Practice prompt ↗Worked solution ↗Expand any day for tasks and deliverables. Your progress is saved on this device.
Nearly every data role forces a trade between the analysis you want and the one that fits the decision window. Prepare a case where you deliberately shipped something less rigorous, named the weakness to the person relying on it, and said what would change your answer. The naming is the part interviewers listen for.
How do you handle missing or noisy data in a real-world production pip…
How do you handle missing or noisy data in a real-world production pipeline?
Approach
- Quantify the outcome, including what you would not claim credit for.
- Pick a story where you drove the decision, not one where you observed it.
- Close with what you would do differently, concretely.
Follow-up
- What did you decide not to do, and why?
- How did you know the outcome was caused by your change?
Choose between three teams' requests with one analyst-week
You have one analyst-week. Three requests land the same morning. A growth team wants a paid-channel readout before a Friday spend decision. A billing team wants gross monthly revenue churn rebuilt, because the current figure recognises cancellation at canceled_at_utc rather than period_end_utc and is therefore wrong. A product team wants a dashboard for a feature launching in six weeks. All three sponsors are peers of your manager. Deliver your ranking, the explicit rule that produced it, and the message you send to the two teams you defer.
Approach
- Recognise what is being probed: whether you prioritise on decision value and reversibility or on who asked most recently and most loudly. The generic answer sorts by importance; the strong one states a rule, applies it, and accepts the ranking it produces even where that is uncomfortable.
- Score each request on three statable things: the decision it unblocks and the date that decision is made, the cost of being wrong in the meantime, and whether the work is one-off or compounding. A wrong published churn figure compounds, because it is quoted downstream and enters forecasts; the channel readout has a fixed date that cannot move; the dashboard has six weeks of slack.
- Notice the tension between value and urgency rather than resolving it by feel. The churn defect is the most valuable item and the least urgent one, which is exactly the shape of work that never gets done.
- Break the churn item in two. A one-hour severity check, sizing the gap between the two recognition points in MRR, is cheap enough to do before ranking anything and may promote the item outright. Do that first, then rank.
- Make the deferrals concrete. Each deferred team gets a date, a reason expressed as another team's decision deadline rather than as relative importance, and the smallest thing you can hand them immediately.
Follow-up
- The dashboard team escalates to your manager. What do you say in that conversation?
- Your severity check shows churn is overstated by 15%. Does the ranking change, and does anybody need to be told today regardless of the ranking?
- A fourth request arrives Wednesday with a Thursday deadline. What comes off the list, and who do you tell first?
Disagree with a product manager's roadmap claim using data
A product manager proposes building a feature on the argument that accounts connecting an integration in week one retain three times better at week four. The figure is correctly computed from dim_user and fct_event, and it has already been shown to leadership. You have one scheduled 1:1 before the roadmap locks. Deliver the specific analysis you would run to test whether the relationship is causal, the result that would change your own mind, and how you open the conversation so that the PM is not put in the position of defending the number in public.
Approach
- Recognise what is being probed: whether you can separate a number being right from an inference being wrong, and do it without costing the PM face. The generic answer recites that correlation is not causation; the strong one names the specific confound and proposes the cheapest design that could distinguish the explanations.
- State the alternative concretely. Accounts that connect an integration in week one are accounts that already have a workflow and a technical owner, so week-one intent plausibly drives both the connection and week-four retention. The selection is on intent, which no amount of post-hoc adjustment observes.
- Order the discriminating analyses by cost. First, condition on pre-connection activity by comparing retention within strata of week-one core-action count, which removes the crude version of the confound but not unobserved intent. Second, look for variation in integration availability that was unrelated to intent, such as a staggered release or an outage window. Third, an encouragement design that randomises a prompt to connect and reads the intent-to-treat effect on week-four retention, which is the only version that identifies an effect.
- Run the timing check, because it is nearly free and it is the most persuasive single piece of evidence. If the retention advantage among connectors is already visible before any of them connected, the causal story is largely finished.
- Pre-commit to what would change your mind and say it before you show anything: if the gap survives stratification and the encouragement arm moves week-four retention at all, the feature has a case and you will say so.
- Open the 1:1 by agreeing with the true part, that the correlation is real and worth chasing, then ask what effect size the roadmap plan assumes. That makes the size of the claim the topic instead of its authorship.
Follow-up
- The encouragement test needs six weeks and the roadmap locks in two. What do you recommend in the interim?
- Stratifying on week-one activity closes half the gap. What do you conclude, and what do you still not know?
- How would you word this in the roadmap document so the PM's original number is reframed rather than deleted?
- 01
How do you handle missing or noisy data in a real-world production pipeline?
- 02
You have one analyst-week. Three requests land the same morning. A growth team wants a paid-channel readout before a Friday spend decision. A billing team wants gross monthly revenue churn rebuilt, because the current figure recognises cancellation at canceled_at_utc rather than period_end_utc and is therefore wrong. A product team wants a dashboard for a feature launching in six weeks. All three sponsors are peers of your manager. Deliver your ranking, the explicit rule that produced it, and the message you send to the two teams you defer.
- 03
A product manager proposes building a feature on the argument that accounts connecting an integration in week one retain three times better at week four. The figure is correctly computed from dim_user and fct_event, and it has already been shown to leadership. You have one scheduled 1:1 before the roadmap locks. Deliver the specific analysis you would run to test whether the relationship is causal, the result that would change your own mind, and how you open the conversation so that the PM is not put in the position of defending the number in public.
Is this an official Qimia interview guide?
No. It is PracHub's own research and practice material for the Data Scientist role at Qimia. Rounds and questions reflect what candidates have reported, not a process Qimia has published, and they change over time. Confirm the current format and scope with your recruiter.
PracHub interview research ↗How long does the entire interview process usually take?
The timeline varies, but candidates typically move through the stages within 3 to 6 weeks. We aim to keep the process efficient while ensuring both parties have enough time to evaluate the fit.
PracHub interview research ↗Is the technical assessment done in-person or remotely?
Most technical assessments are conducted remotely to allow you to work in your preferred environment, though final rounds may be held at our Köln office.
PracHub interview research ↗What differentiates a good candidate from a great one?
Great candidates show curiosity about the business impact of their work and demonstrate a proactive approach to solving architectural challenges, not just data modeling problems.
PracHub interview research ↗How much focus is there on coding versus theoretical knowledge?
It is a balanced mix. You will be expected to demonstrate clean, efficient coding practices while also providing a strong theoretical justification for your analytical approach.
PracHub interview research ↗Sources & methodology 3 sources ↗
No official company page is cited. Rounds and questions come from candidate reports and PracHub editorial material; each source shows the date it was read.
- 01PracHub interview research ↗
PracHub editorial research into this company and role, maintained with this guide. Candidate-reported, not an employer publication.
PracHub page · Accessed 2026-09-22 - 02PracHub Data Scientist practice ↗
Cross-company practice questions for this role.
PracHub page · Accessed 2026-09-22 - 03PracHub interview preparation framework ↗
The framework the preparation plan follows.
PracHub page · Accessed 2026-09-22
Explore related engineering environments and compare the preparation focus.
Fetch Rewards Data Scientist Interview Questions & Guide 2026
Product-sense practice for a Fetch Rewards data scientist interview: define a product and business analytics metric, pick its guardrails, and argue why a tempting alternative would mislead you.
1 digit technology Pvt Data Scientist Interview Questions & Guide 2026
Take-home style practice for data scientists preparing for 1 digit technology Pvt: a messy dataset, a fixed time budget, and a written analysis, reviewed for whether it states its assumptions and whether a reader could reproduce your number
xAI Data Scientist Interview Questions & Guide 2026
Communication practice for xAI data scientist candidates: turn an analysis into a recommendation, name the uncertainty honestly, and answer the follow-up a skeptical stakeholder will raise.
Windfall Data Scientist Interview Questions & Guide 2026
Data-quality drills for Windfall data scientist prep: survivorship and selection bias, leakage through time-ordered features, and extreme values where provenance decides the call. A logging fault or unit slip gets corrected or dropped; a ge