As a Software Engineer at Quectel, you stand at the intersection of cellular technology and embedded computing, building the core software stacks that power billions of connected devices worldwide. Your work directly enables smart modules, IoT gateways, and edge devices across diverse industries, from industrial automation and smart meters to connected vehicles and advanced AI-driven vision systems.
This role is critical to maintaining Quectel's position as a global leader in IoT solutions. Whether you are optimizing Linux kernels, bringing up complex peripheral hardware, or developing camera and multimedia frameworks, your code forms the backbone of products deployed at massive scale. You will collaborate closely with hardware teams, global R&D centers, and regional customers to transform raw silicon into reliable, high-performance commercial products.
Expect a fast-paced environment where you touch the entire software stack, from low-level device drivers up to application frameworks. You will tackle real-world engineering challenges involving resource-constrained hardware, networking protocols, and tight performance constraints. If you thrive on deep technical problem-solving and want to see your code ship inside mission-critical connected devices, this role offers unmatched ownership and impact.
HR Conversation
reportedYou cannot drill a format you do not know, so put the preparation into material that travels. Three pieces of your own work, each rehearsed until you can take a follow-up you did not anticipate, will carry a conversation or a code walkthrough equally well. Specificity is what separates that from filler. A number needs its definition before it means anything: a p99 is over some window and measured at some hop, and a server-side figure excludes the queueing and network time a client would see. The number you cannot qualify is the one to leave out.
What to demonstrate
- Whether your examples carry detail only someone who did the work would hold, such as what the binding constraint actually was, which alternative you rejected and why it was worse, and what you measured on each side of the change
- Whether a number survives one follow-up, meaning you can say what it was measured over and whether it moved because of your change or merely alongside it
- Whether a failure is described with the specific change that followed it, rather than a lesson stated in general terms
- Whether your part in a team effort is stated accurately, including what other people did
How to prepare
- Write a page on each of three projects covering the constraint, the option you rejected, the measurement before and after, and what went wrong. Cut any line you cannot take a follow-up on, since you are writing the parts you will be pressed on rather than a summary.
- Recover the real figures while you still have access: request volume, data size, latency with its percentile and window, team size, timeline. Note where each came from, whether a dashboard, a design document or memory, and mark the estimates so you can say which they are out loud.
- Take your weakest project story to someone who works in a different area and have them ask why four times in succession. The point where you run out of answer is the part to go and re-read before the round.
Technical Evaluations
reportedThe same problem is scored by two different mechanisms depending on the format, and preparing for one does not cover the other. With a person watching, partial progress is visible and a hint is a correction you can absorb; silence is the expensive failure, because nobody can read a half-written function. With an automated grader there is no partial credit for what you were about to do, nobody to ask, and the worked examples in the prompt are the entire specification. Read them as a contract, down to whether an empty result should be an empty list or no output at all.
What to demonstrate
- In a live session, whether your commentary tracks what your hands are doing, and whether a hint redirects you or gets defended against
- In an automated one, whether you cover the cases the examples do not show, since the hidden cases are where the score moves
- Whether you manage the clock on purpose: abandoning an approach that is not converging while there is still time to write something simpler that finishes
How to prepare
- Have someone hand you a problem and feed you one deliberately wrong hint. Practise testing it against a concrete case instead of accepting or rejecting it on authority.
- Do one timed run a week in a plain browser editor with autocomplete, linting and your own snippets switched off, which is closer to what these environments give you
- For the automated format, write the harness before the solution: a main that feeds the worked examples plus an empty and a single-element case and prints expected against actual, so a wrong submission is caught by you first
Practical Demonstration
reportedWhen a round has no standard shape, it is often there because something is still open: an area no earlier conversation reached, a round where the signal came out mixed, or a decision someone is not ready to make alone. Work out which by going back over what each earlier round actually covered rather than how it felt, and arrive able to give evidence on that point without being asked twice. Weak answers replay the loop's earlier material at the same depth. Strong ones go a level deeper and stay consistent with what you already said.
What to demonstrate
- Whether your account of a project matches the one you gave earlier in the loop, since what you said before may be available to whoever runs this round
- Whether you can go a level deeper on something already covered, reaching the decision and its alternatives rather than repeating the summary
- Whether you state your own uncertainty accurately, including parts of a system you did not build and decisions you inherited, instead of claiming even ownership across all of it
- Whether you can answer a question you handled poorly earlier by naming what you missed, rather than delivering a polished second version as if the first had not happened
How to prepare
- Reconstruct the loop on one page: for each round, the questions you were asked and the answer you actually gave, not the better one you thought of afterwards. The gaps on that page are your best available guess at why this round exists.
- Take the two claims you made earlier that carry the most weight and assemble the backing for each: the measurement, the date, what broke, the decision you would make differently now.
- Write down the three facts about your work that must not drift between tellings, such as team size, timeline and your own role, and check your stories against that list rather than trusting recall under pressure
Final Alignment Discussions
reportedWhere the day includes a partner from product, design or data, that conversation is weighted like the technical ones and prepared for least. They are deciding one thing: whether having you in the room makes their decisions cheaper. That means options with costs attached, not implementation detail and not "it depends". An estimate someone can plan against — a range, the assumption that would push it to the high end, and what you would drop to hit the low one — is worth more than a confident single number, which everyone present already knows is wrong.
What to demonstrate
- Whether an estimate comes as a range with the assumption most likely to break it, and states what a specific scope cut would actually buy
- Whether a technical constraint is handed over as a choice with consequences on their side, rather than as a verdict they have no standing to argue with
- Whether you establish what decision is on the table before proposing anything
- Whether risk is raised while it can still change the plan, with the trigger that would confirm it, instead of reported afterwards as a slip
How to prepare
- Take a project that shipped late and write the two-sentence warning you could have given three weeks earlier, naming what you would have needed decided at that point
- Rehearse one estimate out loud until it arrives in three parts: the range, the single assumption that would blow it, and the smallest thing you would cut to protect the date
- Rewrite an objection you have actually made — the "we can't do that" version — as two options with their costs, so the choice ends up with the person who owns it
PracHub editorial advice for the preparation topics above.
Paginating with LIMIT/OFFSET over a set that changes while the client is reading it
OFFSET n makes the database produce and discard n rows before returning anything, so the cost of a page grows with its depth rather than with its size and page 500 costs five hundred pages of work. The correctness problem is worse than the cost: if a row is inserted or reordered between two page fetches, rows shift across the offset boundary and are either skipped entirely or returned twice, and neither outcome leaves any trace in the response for the client to detect. Keyset pagination - WHERE (sort_key, id) < ($last_sort_key, $last_id) ORDER BY sort_key DESC, id DESC LIMIT n, backed by an index in exactly that order - reads only the rows it returns and is stable against concurrent inserts. It requires the tie-break column: a timestamp is not unique, and duplicate sort keys straddling a page boundary reintroduce the skip it was adopted to remove.
Assuming an isolation level prevents the anomaly you actually have
Isolation levels are named by the SQL standard but implemented differently, so any claim about one is only true of a named engine. PostgreSQL defaults to READ COMMITTED, where every statement takes a fresh snapshot, so two statements inside one transaction can legitimately disagree about the same row. Its REPEATABLE READ is snapshot isolation: it removes non-repeatable and phantom reads but permits write skew, where two transactions each read a set, each conclude their own write is safe, both commit, and the combined result violates a constraint that no single row expresses. Only SERIALIZABLE closes that, and it closes it by aborting a transaction with a serialization failure (SQLSTATE 40001), which means the guarantee is theoretical unless the application has a retry loop. InnoDB's REPEATABLE READ is a different mechanism again - plain SELECTs read a consistent snapshot while locking reads and writes see the latest committed row - so a read-modify-write inside one transaction can act on a value that the transaction's own earlier SELECT never returned.
Quoting amortised or average cost as if it were a worst-case guarantee
Appending to a dynamic array is amortised O(1), but the append that triggers a resize copies every element, and hash lookup is constant only while the hash spreads the actual keys. Say which guarantee you are offering when the caller cares about the latency of one call rather than the total over many.
A queue or buffer with no bound
Every producer-consumer boundary needs a capacity and a policy for reaching it: block the producer, shed load, or drop the oldest entry. Unbounded buffering converts a temporary slowdown into memory exhaustion and hides the backpressure signal that would have revealed the consumer was falling behind.
Choose a category, try a prompt, then open its approach, worked solution or follow-up when you need it.
Collapse a redelivered event batch into per-aggregate high-water marks
You drain a batch of up to 5,000,000 events, each (aggregate_id BIGINT, aggregate_version INT, event_type, payload). The log guarantees order within one aggregate only; the batch merges 64 partitions, and a relay failover has redelivered a range, so an older version for an aggregate can appear after a newer one. Given a map of last_applied_version per aggregate, produce the events worth applying, at most one per (aggregate_id, version), plus the count discarded. Target O(n) time. State the memory for 2,000,000 distinct aggregates and what you do when it does not fit.
Approach
- One pass, one hash map from aggregate_id to the highest version kept, and a discard counter. An event whose version is at or below last_applied_version for its aggregate is dropped without further work, which is the whole reason the event carries its version rather than a delta. O(n) expected time, O(d) space in distinct aggregates.
- Keep the maximum, never the last occurrence. The redelivered range means the final appearance of an aggregate in the batch can be an older version than one seen earlier in the same batch, so last-wins applies stale state over newer state and the projection regresses with no error anywhere.
- Cost the memory instead of calling it large: an 8-byte key plus a 4-byte version is 12 bytes of payload, and an open-addressed table held at a 0.7 load factor costs roughly 17 bytes per entry before per-slot metadata, so 2,000,000 aggregates is tens of megabytes in a native layout and several times that in a runtime that boxes both key and value.
- If the distinct set exceeds memory, partition on hash(aggregate_id) mod P and reduce each partition independently. Every event for one aggregate hashes to the same partition, so the per-partition result is exact and the merge is concatenation rather than a second reduction.
- Reject sorting the batch by (aggregate_id, version) as the default. It is O(n log n) and buys nothing, because max is associative and commutative and needs no ordering; sorting earns its cost only when the downstream consumer must receive the events in order rather than a per-aggregate winner.
- Separate the two mechanisms out loud: in-batch deduplication does not make the consumer idempotent, because the same event redelivered tomorrow arrives in a different batch entirely. The projection write itself still has to be keyed on (aggregate_id, version).
Worked solution 20 min
- Write the pass: look up last_applied_version, skip if the event's version is not greater, otherwise upsert into the keep-map only when the incoming version exceeds the version already held, incrementing the discard counter on every skip.
- Hand-trace one aggregate whose events arrive as v5, v3, v4, v5 with last_applied_version = 2, and confirm the output holds v5 once while the counter reads 3.
- Compute the table footprint for 2,000,000 entries at 12 bytes of payload and a 0.7 load factor, then state the multiplier for a runtime that boxes keys and values.
- Add the hash-partitioning fallback and say in one sentence why the per-partition results need no cross-partition merge logic.
Follow-up
- The payload is a patch rather than a snapshot, so applying only the highest version loses the intermediate changes. What changes in your reduction?
- How do you detect that version 7 arrived while version 6 was never delivered, and what should the consumer do about the gap?
- Two events for one aggregate carry the same version with different payloads. Which one is wrong, and how would you find out?
Canonicalise a request body into a stable idempotency fingerprint
idempotency_key.request_fingerprint is a SHA-256 over the method, path and canonicalised body, and a retry whose fingerprint differs must be rejected with 422 rather than served the stored response. Write the canonicaliser. Bodies are JSON up to 256 KB nested at most 32 levels; clients vary key order, whitespace and unicode escaping, and some send 64-bit ids as JSON numbers. Produce a deterministic byte string such that semantically identical bodies match and any semantic difference does not. State your complexity and name two normalisations you refuse to perform.
Approach
- Parse once into a tree, then re-serialise under fixed rules: object keys sorted, array order preserved, one escaping convention, no insignificant whitespace. Parsing is O(n) and sorting keys is O(k log k) per object, so O(n log n) overall with O(depth) stack, and the 32-level cap is enforced during parsing because hostile nesting is how a canonicaliser becomes a stack overflow.
- Sort keys by their UTF-8 bytes and say why the obvious implementation is wrong in some runtimes: a default string comparison that orders by UTF-16 code units places surrogate pairs, meaning code points from U+10000 up, below U+E000 to U+FFFF, which is not UTF-8 byte order, so two services written in different languages disagree on the same document.
- Do not re-encode numbers through a double. IEEE-754 binary64 represents integers exactly only up to 2^53, so normalising a 19-digit id through a float changes it, and 1 against 1.0 cannot be reconciled without deciding whether they are the same value. Preserve the literal token, and require ids as strings at the API boundary if you want them comparable.
- Reject duplicate keys rather than picking one. JSON permits them and parsers disagree, most keeping the last, so any choice you make ties the fingerprint to a parser detail that the code handling the request does not necessarily share.
- Frame the hash preimage so concatenation cannot collide: delimit or length-prefix the method, path and body, otherwise one request's fields can be rearranged into another request with the same byte stream and the same fingerprint.
- Name the refusals and their consequence: no case folding, no dropping of null-valued keys, no Unicode normalisation. Each makes two different requests fingerprint alike, and the resulting failure is the worst one this table has, since the second request is answered with the first one's stored response and its effect never happens.
Follow-up
- A client sends the same logical request with an extra field your API ignores. Same key, different fingerprint, so you return 422. Is that the right answer?
- Where does the fingerprint get computed relative to request decompression and the body-size limit?
- The endpoint takes 1,000 requests per second with 256 KB bodies. What does hashing cost, and does it belong at the edge or in the core service?
Diff a projection against the primary without per-row point reads
The listing projection has drifted and some rows show a stale version. The primary holds 40,000,000 resource rows across 12,000 tenants while serving 1,200 writes and 14,000 reads per second. The obvious repair, reading each resource row and comparing its version against the projection, is correct and would eventually finish. Explain precisely why it is unacceptable here, then give a diff that finds the differing rows, state its complexity, and make it safe to run against a live primary. Replication lag is usually under 100 ms and is not bounded.
Approach
- Quantify the naive cost rather than calling it slow: 40,000,000 point reads at even 0.5 ms each is over five hours serialised, and the only lever is concurrency, which is exactly what you cannot spend. The primary's pool is sized for the write path, and 40,000,000 random reads evict the buffer cache that sustains the 85 percent cache hit rate, so the audit degrades the system it is auditing.
- Replace random access with one ordered pass per side. Both sides can be read in (tenant_id, resource_id) order, which is a sequential scan on each and a merge join in O(n) time and O(1) memory. For a dense diff that is the whole answer, and it reads the primary once instead of 40,000,000 times.
- For the expected sparse case, compare range hashes instead of rows: partition the key space, compute per range an order-independent aggregate over hash(resource_id, version), compare aggregates, and descend only into ranges that differ. With d differing rows and branching factor B, at most d ranges mismatch per level, so the drill-down examines O(d log_B(n/d)) ranges and reads full rows only in mismatching leaves.
- Aggregate with a sum modulo 2^64 or a multiset hash, never XOR. XOR is order-independent but self-cancelling, so two rows wrong in the same way, or a row duplicated on one side, leave the range aggregate matching and the range is declared clean.
- Pin the comparison to a point in time or it reports lag as drift: consider only rows whose updated_at is older than now minus a lag margin, and re-check each candidate mismatch individually before repairing. At 1,200 writes per second a diff without this reports thousands of false positives, and an unattended repairer would then overwrite live rows with stale values.
- Make the run resumable and throttled: batch by range key, persist the last completed range, and watch a signal such as replica lag or primary CPU, pausing rather than pressing on. A reconciliation that cannot be stopped and resumed gets killed halfway and restarted from zero, which is how a repair becomes an incident.
Follow-up
- The diff reports 900 stale rows. How do you decide between patching those rows and rebuilding the projection from resource_revision?
- Same job, but the projection lives in a search index that cannot be scanned in key order. What changes?
- How would you run this continuously at low cost instead of only as incident response?
Explain why the owner filter ignores the listing index
The only index on resource is (tenant_id, status, updated_at DESC, resource_id DESC). A new endpoint returns one user's resources across all statuses, newest created first: WHERE tenant_id = $1 AND owner_user_id = $2 ORDER BY created_at DESC LIMIT 20. On a tenant with 2M rows it takes 900 ms and EXPLAIN shows a sort above a large scan. Explain precisely why the existing index cannot serve it, give the index that can, and state which of these the new index still will not help: owner_user_id alone across tenants; the same query ordered by updated_at. PostgreSQL 16.
Approach
- Separate the two jobs an index does. For filtering, a composite btree is seekable only on a left prefix, so with no predicate on status the scan can at best range over tenant_id and test owner_user_id per row; PostgreSQL 16 has no btree skip scan to jump the unconstrained column.
- For ordering, the index is sorted by (status, updated_at) within a tenant and not by created_at, so the LIMIT cannot stop early: every matching row is read and then sorted. That is the 'Sort Method: top-N heapsort' line, and it is why the plan reads 2M rows to answer with 20.
- Derive the replacement from the access path — equality, equality, then the ordering column: CREATE INDEX CONCURRENTLY ON resource (tenant_id, owner_user_id, created_at DESC). The scan seeks to the (tenant, owner) range and walks 20 entries in order, so the Sort node disappears along with the row-read.
- Treat INCLUDE (title, status) as conditional, not free. An index-only scan still visits the heap for any row whose page is not marked all-visible, so on a table taking 1.2k writes/second the win depends on autovacuum keeping the visibility map current, and the wider index costs more on every insert.
- Answer the two negatives explicitly. owner_user_id alone is not a left prefix of the new index, so it degrades to a full scan of the index at best. Ordered by updated_at, the query still seeks on the (tenant, owner) pair but must sort, because only created_at is ordered within that pair.
- Measure both sides with EXPLAIN (ANALYZE, BUFFERS) and compare estimated against actual rows at the lowest node — a 2M-versus-200 misestimate there is usually what chose the plan, and adding an index will not fix a statistics problem.
Worked solution 25 min
- Load 2M resource rows across 5k owners in one tenant, run the query under EXPLAIN (ANALYZE, BUFFERS), and record the node reading the most rows plus the Sort Method line.
- Create (tenant_id, owner_user_id, created_at DESC) concurrently and re-run, confirming the Sort node is gone and actual rows fall to about 20.
- Run the two negative cases and capture the plan for each.
- Re-run the original tenant listing query to confirm the new index has not displaced the index that query depends on.
Follow-up
- 90% of rows are status='active'. Would a partial index WHERE status = 'active' change your answer, and for which of the three queries?
- A dashboard runs this for 40 owners in one page load. What changes about the design?
- How do you roll this index out on a table taking 1.2k writes/second, and what does it cost on every insert from then on?
Find version gaps and relay lag with window functions
outbox_event holds event_id, aggregate_type, aggregate_id, aggregate_version, event_type, payload, status ('pending','published','dead'), attempts, created_at, published_at. A projection is missing rows and you must decide whether the relay skipped events or the consumer dropped them. Write three queries over the last seven days: one listing every aggregate_id whose published aggregate_version sequence has a hole, one giving per-day counts with a running total, and one returning the newest published event per aggregate. For each, say where the window function is evaluated relative to WHERE and LIMIT. PostgreSQL 16.
Approach
- Gaps: compute lead(aggregate_version) OVER (PARTITION BY aggregate_id ORDER BY aggregate_version) in a subquery, then filter next_version <> aggregate_version + 1 in the outer query. Window functions are evaluated after WHERE, GROUP BY and HAVING and before the outer ORDER BY and LIMIT, so the predicate cannot sit in the same WHERE clause and PostgreSQL 16 has no QUALIFY.
- Say what the seven-day filter does to the answer: it truncates every partition, so the first row per aggregate has no predecessor inside the window and a hole spanning the boundary is invisible. Widen the window, or join to resource.version as the authority for the true maximum.
- Running total: SELECT date_trunc('day', created_at) AS d, count() AS n, sum(count()) OVER (ORDER BY date_trunc('day', created_at) ROWS UNBOUNDED PRECEDING). An aggregate inside a window call is legal because grouping runs before windowing. The grouping key is unique per row here so ROWS and RANGE agree, but write the frame anyway — over ungrouped rows with tied timestamps the default RANGE frame pulls in every peer row and the total jumps.
- Newest per aggregate: DISTINCT ON (aggregate_id) ... ORDER BY aggregate_id, aggregate_version DESC is the cheap PostgreSQL-only form when an index matches that order; row_number() OVER (PARTITION BY aggregate_id ORDER BY aggregate_version DESC) = 1 is the portable form and needs a subquery for the same evaluation-order reason as the gap query.
- Interpret rather than report: no gaps plus a normal p95 of published_at - created_at points at the consumer; gaps or a fat lag tail point at the relay; rows still 'pending' with attempts > 0 point at neither, because they never left the database.
- Be explicit that the partial index on (created_at, event_id) WHERE status = 'pending' does not serve any of these — they read published rows. Name the index a recurring monitor would need, and say why a query run twice a year may not deserve one.
Follow-up
- Relay failover redelivers events. Does a duplicate break the gap query, and how would you detect one from this table alone?
- Turn the gap check into a continuous monitor rather than a query someone runs after an incident. What does it watch?
- The consumer claims it never received event 4,812,006. What do you look at, in what order?
What are the fundamental principles of working with hardware interface…
What are the fundamental principles of working with hardware interfaces like I2C, SPI, and UART?
Approach
- Clarify what is being asked and what a complete answer contains.
- State your assumptions explicitly before working the problem.
- Say what you would check first and why it is the highest-information step.
Follow-up
- What assumption would you test first?
- How would you know your answer was wrong?
Explain the differences between specific implementations or code snipp…
Explain the differences between specific implementations or code snippets.
Approach
- Say what you would check first and why it is the highest-information step.
- State your assumptions explicitly before working the problem.
- Clarify what is being asked and what a complete answer contains.
Follow-up
- How would you know your answer was wrong?
- What assumption would you test first?
Design the async export contract a client can resume safely
A tenant asks for a CSV of every resource. The work runs for minutes on the worker fleet through a job_run row carrying a lease, an attempt count and a dedupe_key, far past the edge's 400 ms budget. Callers are a browser that polls and a script that walks away and checks later. Specify what the submit call returns, the operation resource and its states, how a duplicate submit is handled, how a client learns about completion, what cancellation means given that a lease can expire mid-run, and how the result is fetched and when it expires.
Approach
- Split the API in two. Submit returns 202 with an operation id and a location to poll, and never blocks on the work. The operation is a real resource with its own lifecycle - queued, running, succeeded, failed, cancelled - plus attempt, a monotonic progress figure, and a terminal error drawn from the same code taxonomy the synchronous endpoints use, so a client needs one error vocabulary rather than two.
- Deduplicate at submit using job_run.dedupe_key, unique over (job_type, dedupe_key) while status is 'queued' or 'running': a repeat submit of the same logical export returns 200 with the existing operation instead of 202 with a new one, and the partial index deliberately permits a legitimate re-run once the first has finished. Pair it with the request's idempotency key so an HTTP-level retry of the submit is exact rather than merely similar.
- Tell the poller how to poll: Retry-After on the polling response, a minimum interval enforced at the edge, and a documented maximum lifetime after which an operation is reaped. Polling is the contract of record; the webhook is the fast path, and both must lead to the same terminal state, so a client that receives the completion event and then polls anyway sees no contradiction.
- Be exact about cancellation. A cancel request records intent; it cannot stop work already executing. The handler reads the flag at checkpoints, and because a lease expires on a clock that cannot distinguish a dead worker from a slow one, a second copy may start after the cancel was recorded - so the handler re-reads the flag immediately after claiming the lease. 'cancelled' becomes terminal only when no lease is outstanding; reporting it earlier shows a client a stopped job while a worker is still writing output.
- Make the handler safe to run twice, because the lease guarantees that it will be. Write output to a deterministic object key derived from the operation id so a second copy overwrites its own work instead of appending a second file, and record completion with a conditional update that only the copy holding the current lease can win.
- Treat result fetch as a separate authorised read: a short-lived signed URL, the tenant checked when it is issued rather than only when the file was produced, and a documented retention after which the operation remains terminal but the bytes are gone - a state the client must be able to tell apart from a failure.
Worked solution 40 min
- Write the submit request and its two possible responses, 202 for new and 200 for a duplicate, and the dedupe_key construction.
- Draw the operation state machine, marking which transitions a client may observe and which are terminal.
- Write the cancellation sequence across a lease expiry, showing where the second copy reads the flag.
- Define the output key, the completion update's predicate, and why both are needed for a double run.
- Specify result fetch: URL lifetime, authorisation point, retention, and the distinct response once the bytes are gone.
Follow-up
- An operation has said 'running' for 40 minutes and the worker is gone. What does the client see, and which columns in job_run decide that?
- Two tenants each submit 50 exports at once. What in this contract stops one of them delaying the other?
- The customer wants the export emailed instead. What changes, and what becomes harder to make exactly-once?
Exports duplicate a row range about once a week
Roughly once a week an export writes a file containing a duplicated range of rows. The affected job_run rows show attempt = 1, status = succeeded, one started_at, and a lease_owner naming a different host from the one whose logs show the job starting. Leases last 30 seconds and are heartbeated every 10 from inside the handler; lease_expires_at is computed on the worker and compared against the database's now(). Find the mechanism, and give a fix that holds even if you cannot fix the clocks.
Approach
- Start from the fact that eliminates the obvious answer. attempt = 1 means no retry was recorded, so this is not a re-run after failure; two workers ran the same row concurrently and the takeover path never touched the counter. lease_owner naming a host other than the one that started the job is the same statement from the other side.
- Enumerate the mechanisms that cause a premature takeover, then find the signal that separates them. Either the lease genuinely expired because the heartbeat did not fire, which is what happens when the heartbeat runs on the handler's own thread and the handler makes a long blocking call, or it only appeared expired because two clocks disagree, since lease_expires_at is written from the worker's clock and evaluated against the database's. The discriminator is the distribution: incidents clustered on the longest exports indict the heartbeat, incidents clustered on one host indict skew. Measure both, and measure each host's offset against the database directly.
- Read the reclaim query precisely. In PostgreSQL now() is transaction start time, not statement time, so a reclaimer holding a long transaction compares against an older timestamp than expected; clock_timestamp() is the statement-time function. This is worth ruling in or out before you redesign anything, because it changes which rows look expired.
- Remove the second clock rather than trying to synchronise it. Issue and extend the lease in the database, with lease_expires_at = now() + interval '30 seconds' in both the claim and the heartbeat, so exactly one clock is ever compared and worker skew stops mattering to this predicate.
- Accept that a lease can still expire under a slow worker, because a lease cannot distinguish slow from dead, and fence the work. Carry a monotonically increasing lease generation and make every write the handler performs conditional on still holding it, as UPDATE ... WHERE job_run_id = $1 AND lease_owner = $2 AND lease_generation = $3, so a displaced worker's writes affect zero rows and it aborts instead of duplicating.
- Make the handler's writes idempotent independently of all that: give each exported chunk a natural key of (job_run_id, batch_start) with a unique constraint so a second copy conflicts rather than appends, move the heartbeat off the handler's thread, and increment attempt on takeover so the event is visible in a metric.
Follow-up
- The displaced worker has already streamed half the file to object storage. What makes that side effect safe to repeat?
- You now count takeovers. What alert fires on that counter, and at what threshold?
- What breaks if you simply raise the lease to five minutes?
For a candidate senior enough that the loop turns on design and judgement rather than on whether the coding round gets finished. Five days build one system properly and then stress it; coding gets a single maintenance day, on the assumption that the risk at this level is an unexamined tradeoff rather than a missed algorithm.
Prepare, practise & reflect
One practical outcome each day. Spend longer where you need it.
0 / 7 done01Numbers before diagrams
- Build your own reference card of the figures you will re-derive all week: bytes for a realistic record, requests per second implied by a given daily active count, and the storage that a year at a given write rate produces. Derive each one rather than copying it, because the derivation is what survives a follow-up.
- Turn one product statement into capacity requirements. From ten million daily users at four writes and forty reads each, state the peak-to-average factor you are assuming and why, then produce peak write QPS, peak read QPS and a year of storage.
- Write the two numbers whose order of magnitude changes the design, the read-to-write ratio and the working-set size against memory per node, and state the threshold at which each one flips your answer.
Deliverable: A one-page numbers card and one worked capacity estimate with every assumption written down.
Practice prompt ↗Practice prompt ↗Worked solution ↗02One system, from requirements to schema
- Spend the first ten minutes producing only functional requirements, non-functional targets with numbers attached, a p99 latency, a durability expectation, a consistency requirement, and an explicit out-of-scope list.
- Define the interface before the boxes: the three or four endpoints, their parameters, what each returns, and which of them are idempotent.
- Write the data model, then write the single access pattern that justifies it, and state what the schema would have to become if the dominant access pattern were the other one.
Deliverable: One design carried to endpoint-and-schema depth, with non-functional targets expressed as numbers and a written out-of-scope list.
Practice prompt ↗Practice prompt ↗03The consistency you are actually buying
- Write out what a client sees under asynchronous replication when its write commits on the leader and its next read is served by a lagging follower, then write the two fixes, pinning that session's reads to the leader for a bounded window or carrying a version token the replica must reach, and the cost of each.
- Work the quorum arithmetic on paper for N of three with W and R of two, and separate what R + W > N does guarantee, that any read set intersects any write set, from what it does not: on its own it is not linearizability, and a sloppy quorum that accepts writes on nodes outside the preference list breaks even the intersection.
- Take two storage choices with different defaults, a single-leader relational store committing synchronously and a quorum-replicated store that converges eventually, and write the specific product behaviour that would be wrong under each, rather than a general statement about which is stronger.
Deliverable: A page separating what quorum overlap guarantees from what it does not, with one concrete product misbehaviour attached to each gap.
Practice prompt ↗Practice prompt ↗04Failure is the design
- For one write path, work through the case where the client times out after the server has already committed, then design the idempotency key: who generates it, how long it is retained, and what the duplicate request returns.
- Express the retry policy as parameters rather than as a word: maximum attempts, base delay, backoff factor, jitter, and which error classes are retried at all. Then state why retrying a non-idempotent write without a key is a correctness bug and not merely waste.
- Compute the fan-out effect on tail latency. If a request waits on ten backends and each independently exceeds its p99 one percent of the time, the chance at least one is slow is 1 - 0.99^10, about ten percent. Then write why independence is the optimistic assumption and what correlates them in practice.
- Name the backpressure mechanism for one queue or one dependency in the design, a bounded queue with shedding or a concurrency limit, and write what the caller is told when it engages.
Deliverable: One write path with an idempotency design, a parameterised retry policy, and a written tail-latency calculation with its assumption named.
Practice prompt ↗Practice prompt ↗Worked solution ↗05Scaling the hot path
- Choose cache-aside or write-through for one read path and write the staleness window each produces, then name the invalidation event and what the system does when that event is lost.
- Design against the stampede: either coalesce requests so only one recomputes a missing key, or refresh early with jittered expiry, and write why identical TTLs on keys populated in the same moment produce a synchronised expiry and a thundering herd.
- Shard one table by a key you choose, then answer the two questions that break the choice: which queries now require a scatter-gather, and what happens to the distribution when one tenant is a hundred times larger than the median.
- Write the cost of adding a node under plain modulo placement, where nearly every key moves, against consistent hashing, where roughly one key in n+1 moves, and state what virtual nodes are for.
Deliverable: A caching and sharding decision for one path, each with its failure mode and its rebalancing cost written beside it.
Practice prompt ↗Practice prompt ↗06Keep the coding hand in, at the bar that applies to you
- Solve one medium problem in thirty minutes, then spend twenty more making it production-shaped: named invariants, validation at the boundary, and errors that distinguish a caller mistake from an internal fault.
- Write the tests you would require of a colleague's version of that function: one for empty input, one for the boundary, and one for the case the implementation is most likely to get wrong.
- Read a piece of your own code from six months ago and write the change you would ask for, phrased as you would actually phrase it in review.
Deliverable: One problem hardened to review standard, with its test list and one written review comment.
Practice prompt ↗Practice prompt ↗07Defend it while being interrupted
- Run a forty-five-minute design mock with an interviewer briefed to change a requirement halfway, a tenfold traffic increase or a new strict consistency requirement, and to push on one number you estimated.
- Rehearse the two sentences a senior loop is listening for: naming the tradeoff you are choosing against and why, and saying what you would measure to learn that the choice was wrong.
- Prepare the design you regret: a real decision, the constraint that produced it, what it cost, and what you changed afterwards.
Deliverable: Mock notes recording how the design changed under the new requirement, plus a written account of one regretted decision.
Practice prompt ↗Worked solution ↗Expand any day for tasks and deliverables. Your progress is saved on this device.
Bring the two or three numbers the story rests on and know how they were collected. A p99 whose timer starts inside your handler excludes the time a request spent queued, so it can sit flat while users wait longer. Give the window, the percentile and what the measurement left out, or drop the number.
Walk me through your most complex embedded project, detailing your spe…
Walk me through your most complex embedded project, detailing your specific contributions and architectural choices.
Approach
- Give the blast radius: what could have broken, and what you measured.
- State the situation in two sentences and spend the rest on the reasoning.
- Pick a story where you made the decision, not one where you watched it.
Follow-up
- What would you do differently if you ran that again?
- How did you know your change caused the improvement?
How do you handle dynamic memory allocation and prevent leaks in resou…
How do you handle dynamic memory allocation and prevent leaks in resource-constrained environments?
Approach
- Close with what you would do differently, concretely.
- Pick a story where you made the decision, not one where you watched it.
- State the situation in two sentences and spend the rest on the reasoning.
Follow-up
- What did you decide not to do, and why?
- How did you know your change caused the improvement?
What is your future career plan, and how do you stay updated on rapid …
What is your future career plan, and how do you stay updated on rapid advancements in edge computing and cellular technologies?
Approach
- Close with what you would do differently, concretely.
- Name the disagreement and how you resolved it with evidence.
- Pick a story where you made the decision, not one where you watched it.
Follow-up
- What would you do differently if you ran that again?
- How did you know your change caused the improvement?
How do you approach cross-team collaboration when debugging an issue t…
How do you approach cross-team collaboration when debugging an issue that spans hardware, firmware, and software layers?
Approach
- State the situation in two sentences and spend the rest on the reasoning.
- Pick a story where you made the decision, not one where you watched it.
- Give the blast radius: what could have broken, and what you measured.
Follow-up
- What would you do differently if you ran that again?
- What did you decide not to do, and why?
- 01
Walk me through your most complex embedded project, detailing your specific contributions and architectural choices.
- 02
How do you handle dynamic memory allocation and prevent leaks in resource-constrained environments?
- 03
What is your future career plan, and how do you stay updated on rapid advancements in edge computing and cellular technologies?
- 04
How do you approach cross-team collaboration when debugging an issue that spans hardware, firmware, and software layers?
Is this an official Quectel interview guide?
No. It is PracHub's own research and practice material for the Software Engineer role at Quectel. Rounds and questions reflect what candidates have reported, not a process Quectel has published, and they change over time. Confirm the current format and scope with your recruiter.
PracHub interview research ↗How difficult is the interview process, and how much preparation time should I plan for?
The interview difficulty is generally moderate to challenging, depending on the specific team and depth of technical focus required. Most candidates benefit from dedicating two to three weeks of focused review on C/C++ fundamentals, pointer logic, and embedded Linux internals.
PracHub interview research ↗What differentiates successful candidates during the technical rounds?
Successful candidates stand out by not just providing correct answers, but by clearly explaining their underlying reasoning. When tackling code analysis or debugging scenarios, articulate your thought process step by step and demonstrate a systematic approach to problem-solving.
PracHub interview research ↗What is the culture like for engineering teams at Quectel?
Quectel's engineering culture combines the agility and individual ownership of a technology organization with the stability and global scale of an industry leader. You will work alongside collaborative, globally distributed teams where individual contributions directly shape commercial products.
PracHub interview research ↗What is the typical timeline from initial application to final offer?
The recruitment timeline moves efficiently, typically spanning a few weeks from your initial recruiter conversation through technical screens and final manager discussions. Quectel reports keeping an active review process so every candidate hears back in a timely way.
PracHub interview research ↗Sources & methodology 3 sources ↗
No official company page is cited. Rounds and questions come from candidate reports and PracHub editorial material; each source shows the date it was read.
- 01PracHub interview research ↗
PracHub editorial research into this company and role, maintained with this guide. Candidate-reported, not an employer publication.
PracHub page · Accessed 2026-09-22 - 02PracHub Software Engineer practice ↗
Cross-company practice questions for this role.
PracHub page · Accessed 2026-09-22 - 03PracHub interview preparation framework ↗
The framework the preparation plan follows.
PracHub page · Accessed 2026-09-22