As a Data Scientist at SCOR, you serve as a critical bridge between complex data modeling and strategic decision-making within the insurance and reinsurance sector. Your role involves leveraging advanced analytics to assess risk, optimize product performance, and drive technical innovation. You will be expected to translate raw data into actionable insights that influence the company’s core business objectives.
This role is highly impactful, as your work directly influences the accuracy of models that underpin SCOR’s global operations. You will collaborate closely with multidisciplinary teams—including underwriters, actuaries, and product managers—to solve high-stakes problems. You should expect to handle both the technical rigors of predictive modeling and the nuanced challenges of product-focused experimentation.
HR Screening
reportedA screening call is a matching exercise run by someone who will not evaluate your statistics. They are checking that the work described on your resume is work you personally did, and that its scope matches the level the role is written for. Logistics get settled in the same half hour so nobody spends an interviewer's afternoon on a mismatch. The answer that fails is the one narrated in the plural. If every sentence is 'we built' and 'the team decided', there is nothing specific to write down about you. Name the piece that was yours, the decision you made inside it, and what changed after.
What to demonstrate
- Whether the ownership implied by your resume survives one round of follow-up about who actually did which part
- Whether your described scope (data size, stakeholders, what shipped) matches the seniority the role is written at
- Whether timeline, location and compensation expectations make the rest of the loop worth scheduling
How to prepare
- Rewrite your top three resume bullets in the first person singular, each with the decision you made and what moved afterwards, then say them out loud once so the 'we' does not return under pressure
- Attach one number to each project: the baseline, the change, and the window it was measured over. Where impact was never measured, say that plainly rather than inventing a figure
- Settle your compensation range before the call and give it as a range with a reason behind it, such as current total comp or a competing timeline, instead of deflecting the question twice
Technical Assessment
reportedBefore anything else, this round is a reading test. You are given a small schema and a question phrased in business language, and most of the difficulty sits in the gap between them. Who counts as an active user, does a refunded order still count as an order, is that date column an event time or a load time. Weak answers start typing immediately and compute something precise about the wrong population. Strong ones pin the definition in one sentence, name the column that encodes it, then write the query. On a timed assessment with nobody to tell, write the definition in a comment anyway.
What to demonstrate
- Whether an ambiguous term becomes a specific column and filter before any computation happens
- Whether you read the schema for keys and cardinality rather than only for column names
- Whether the result answers the question at the grain it was asked at, per user or per session or per day
How to prepare
- Take three metrics you already use and write down the exact filter and exact grain behind each, then practise stating one of them in a single sentence out loud
- On a schema you have never seen, spend the first minute writing what one row of each table means and which key it is unique on, then predict which joins can duplicate rows
- Rehearse a version where the definition changes halfway through, and edit the query you have instead of starting over
Technical Interviews
reportedThis round decides whether someone can hand you a schema and a question and trust the number that comes back. Correctness under a clock is the bar, not clever syntax. The habit that separates strong from weak answers is checking the grain: after every join, know how many rows you expect and whether the count moved. Most wrong answers in this format are not wrong logic, they are a fan-out from a key that turned out not to be unique, or a filter applied before an aggregate when it belonged after. Say what you expect before you run it.
What to demonstrate
- Whether your row counts survive each join, and whether you notice on your own when they do not
- Deliberate handling of rows that fail to match, including whether the question needs an inner join or a left join with the non-matches kept and counted
- Whether NULLs are treated on purpose, given that a NULL compares equal to nothing and that COUNT of a column skips it
- Reaching a defensible answer inside the window instead of a refined one after it
How to prepare
- Take a two-table schema, write a join that fans out on purpose, then fix it by collapsing the many-side to one row per key before joining. Repeat until the fix is reflex rather than recall.
- Write a funnel as one query and print the distinct user count at each stage, then confirm each stage is a subset of the one above it rather than assuming it
- Do a few timed runs in a plain text box with no autocomplete and no formatter, since assessment editors often have neither
PracHub editorial advice for the preparation topics above.
Assuming a model is fair because protected attributes are not among its inputs
Postcode, device, tenure, income proxies and even transaction patterns correlate with protected characteristics, so a model can produce a disparate outcome without ever reading the attribute. Credit decisions additionally carry an explainability obligation in many jurisdictions, since a denial has to be accompanied by its principal reasons, which constrains model form and feature engineering rather than being a reporting afterthought. Treating fairness testing and reason-code generation as design constraints from the first model version is far cheaper than retrofitting them to a deployed one.
Reading the most recent months of fraud and dispute rates as final
Consumer dispute rights commonly run around 120 days from the transaction or expected delivery date, and several reason codes run considerably longer, so the disputes belonging to a recent transaction month have simply not been filed yet. Any chart attributed by transaction date therefore slopes down at the right edge regardless of what is happening. The fix is to report only matured cohorts, or to apply development factors estimated from completed months and to show the estimate as an estimate.
Ending an analysis without a recommendation or next step
Close with what you would do and what would change your mind, stated as a condition you can check later. If the evidence is genuinely inconclusive, recommend the specific next measurement and say what it costs in time or exposure.
Reaching for a model before the target metric exists
Before naming an algorithm, write down the label, the prediction time, and the action that changes when the score crosses a threshold. If you cannot say what decision the output drives, any modelling choice is guesswork dressed up as method.
Choose a category, try a prompt, then open its approach, worked solution or follow-up when you need it.
How do you decide between a frequentist and a Bayesian approach for a …
How do you decide between a frequentist and a Bayesian approach for a specific test?
Approach
- Quantify uncertainty explicitly rather than reporting a point estimate alone.
- Sanity-check the answer against a simple bound or a simulated case.
- Write down the assumption the method needs before you use the method.
Follow-up
- Which assumption here is most likely to be violated in practice?
- What sample size would you need to detect an effect half this size?
How do you monitor and maintain model performance after deployment?
How do you monitor and maintain model performance after deployment?
Approach
- Check what information would not exist at prediction time, and exclude it.
- Say how the offline result would be validated online before it is trusted.
- Pick an evaluation metric that matches the cost of each error type, not a default.
Follow-up
- What would you monitor after launch to know the model is still valid?
- How would you choose the decision threshold, and who owns that choice?
Bootstrap a fraud loss rate that clusters within merchant
You have a per-transaction frame with auth_id, merchant_id, settled_amount_reporting and net_loss_reporting, both already in one reporting currency. Most rows carry zero loss, a few carry large ones, and losses cluster within merchant. Using only numpy's random generator and no resampling helper from any library, write a bootstrap that returns a 95 percent interval for net fraud loss in basis points of settled volume, resampling merchants with replacement and taking all rows belonging to each drawn merchant. Also produce the naive row-level interval and state which you would report.
Approach
- State the estimator before writing it: total net loss divided by total settled volume, times 10,000. It is a ratio of sums, so each replicate recomputes both sums. Averaging per-transaction loss rates instead would weight a five-unit transaction like a five-thousand-unit one.
- Pre-aggregate loss and volume to merchant level once. For a ratio of sums, drawing merchants and taking all their rows is arithmetically identical to drawing merchant-level (loss_sum, volume_sum) pairs, so a replicate becomes one integer draw plus two vectorised sums rather than a groupby inside the loop.
- Draw B replicates of M merchant indices with replacement, where M is the observed merchant count, compute the ratio per replicate, and take the 2.5th and 97.5th percentiles. Say explicitly that this is a percentile interval and that BCa would correct the skew-induced bias if the decision is close.
- Repeat with independent row draws for the naive interval and compare widths on the same replicate count.
- Report the clustered interval. Rows within a merchant share an acceptance profile, a category code and a fraud exposure, so they are not independent, and the row-level interval understates variance by roughly the design effect.
Worked solution 30 min
- Compute the point estimate directly on the full data and keep it for comparison.
- Aggregate to merchant-level loss and volume arrays, record M, and set B to 2,000 with a seeded numpy Generator.
- In a vectorised loop, draw integer indices of shape (B, M), index both arrays, sum along axis 1, and take the ratio times 10,000.
- Repeat for the row-level version using the per-transaction arrays and N draws.
- Take the 2.5 and 97.5 percentiles of each replicate array and report both intervals alongside the point estimate.
Follow-up
- Your clustered interval is three times wider. How do you explain that to someone who wanted a tighter number?
- One merchant accounts for 40 percent of losses. What does that do to the interval, and what would you do about it?
- How does this change if the question is whether two months differ rather than what this month's rate is?
What criteria do you use to select a model for a specific business pro…
What criteria do you use to select a model for a specific business problem?
Approach
- Compute rates by summing numerator and denominator separately, never by averaging rates.
- State the window function and its partition and ordering out loud before writing it.
- Check whether any join is one-to-many before aggregating, or the sums inflate.
Follow-up
- How would you verify this result without re-running the same query?
- How does the query change if the join becomes one-to-many?
Describe a scenario where you had to join multiple complex tables; wha…
Describe a scenario where you had to join multiple complex tables; what performance considerations did you account for?
Approach
- Check whether any join is one-to-many before aggregating, or the sums inflate.
- Compute rates by summing numerator and denominator separately, never by averaging rates.
- Say which table is the grain you start from, and join outward from it.
Follow-up
- How does the query change if the join becomes one-to-many?
- What breaks if events arrive late or out of order?
Vintage ninety-plus rate at twelve months on book
From fct_loan_performance_monthly, build a vintage table keyed on origination_month: the share of each cohort that ever reached days_past_due of 90 or more, or charge_off_flag = true, at or before months_on_book = 12. Restructuring resets days_past_due, so for any loan with restructured_flag true, evaluate only the month ends strictly before its first restructured month. Return origination_month, loans_funded, bad_loans and bad_rate. Exclude any cohort that does not yet have a months_on_book = 12 observation for every loan still on book.
Approach
- Establish the cohort denominator from the first month end each loan appears at, months_on_book = 0, so a loan is counted once in its origination_month rather than once per monthly row.
- Find each loan's first restructured month with MIN(as_of_month_end) FILTER (WHERE restructured_flag) OVER (PARTITION BY loan_id), or the equivalent grouped subquery, and keep it null for loans never restructured.
- Flag a loan bad if any row with months_on_book <= 12 and as_of_month_end earlier than that first restructured month has days_past_due >= 90 or charge_off_flag = true, which is what 'pre-restructure worst state' means in practice.
- Gate maturity by requiring the cohort's newest month end to be at least 12 months after origination_month, and report immature cohorts as incomplete rather than letting them appear at a flattering low rate.
- Aggregate to one row per origination_month and read the column downward, not across calendar time, because the whole point is comparing cohorts at equal age.
Worked solution 35 min
- CTE 1: per loan_id, derive origination_month, the first restructured month end, and the maximum months_on_book observed.
- CTE 2: join back to the monthly rows, filter to months_on_book <= 12 and to month ends before any restructure, then flag bad with a BOOL_OR.
- CTE 3: aggregate to origination_month with COUNT() as loans_funded and COUNT() FILTER (WHERE is_bad) as bad_loans.
- Apply the maturity gate and compute bad_rate with a numeric cast.
Follow-up
- Should a restructure inside 12 months count as bad in its own right? Argue both sides and say what you would actually ship.
- A loan that prepaid in full at month 4 never had a chance to go 90 days past due. In or out of the denominator, and why?
- The 2025-11 cohort is two points worse at month 12 than its neighbours. What three queries do you run before you call it a credit-quality change?
How would you design a product metric for a new insurance initiative?
How would you design a product metric for a new insurance initiative?
Approach
- Fix the population and the time window before naming any metric.
- State what result would change your recommendation, so the answer is falsifiable.
- Restate the decision this analysis has to support, and who acts on the answer.
Follow-up
- Which segment would you cut first, and what would that rule out?
- What would you do if the primary metric and the guardrail moved in opposite directions?
If we observed a sudden drop in a key product metric, what steps would…
If we observed a sudden drop in a key product metric, what steps would you take to diagnose the root cause?
Approach
- Restate the decision this analysis has to support, and who acts on the answer.
- State what result would change your recommendation, so the answer is falsifiable.
- Decompose the metric into the rates that drive it, and say which one you would check first.
Follow-up
- How would you detect that the metric is being gamed rather than genuinely improving?
- Which segment would you cut first, and what would that rule out?
How do you prioritize tasks when working on multiple high-priority pro…
How do you prioritize tasks when working on multiple high-priority projects simultaneously?
Approach
- Decompose the metric into the rates that drive it, and say which one you would check first.
- Restate the decision this analysis has to support, and who acts on the answer.
- Name one primary metric, then the guardrail that stops it being gamed.
Follow-up
- What would you do if the primary metric and the guardrail moved in opposite directions?
- How would you detect that the metric is being gamed rather than genuinely improving?
How do you balance trade-offs between short-term engagement and long-t…
How do you balance trade-offs between short-term engagement and long-term risk management?
Approach
- Name one primary metric, then the guardrail that stops it being gamed.
- Decompose the metric into the rates that drive it, and say which one you would check first.
- State what result would change your recommendation, so the answer is falsifiable.
Follow-up
- Which segment would you cut first, and what would that rule out?
- What would you do if the primary metric and the guardrail moved in opposite directions?
How do you determine the required sample size to reach statistical sig…
How do you determine the required sample size to reach statistical significance?
Approach
- Name the guardrails that would stop a launch even on a positive primary result.
- Say whether units interfere with each other, and switch design if they do.
- State the primary metric and the minimum effect worth shipping, then size the test.
Follow-up
- How would you handle interference between treated and control units?
- What would you conclude if the result is positive but the test is underpowered?
What are the most common experimentation pitfalls that could lead to b…
What are the most common experimentation pitfalls that could lead to biased results?
Approach
- State the primary metric and the minimum effect worth shipping, then size the test.
- Decide the analysis before seeing data, including how long it runs and when you look.
- Say whether units interfere with each other, and switch design if they do.
Follow-up
- What would you do if you could not randomise at all?
- What would you conclude if the result is positive but the test is underpowered?
Design an authorization approval rate a team cannot game
A payments team is given authorization approval rate as its quarterly target, defined as approved authorizations over all authorizations in fct_payment_authorization. Using auth_id, card_token_id, merchant_id, amount_minor, transaction_currency, auth_result, is_reversal, parent_auth_id, channel, issuer_country and requested_at, list three ways the team can raise that number without a single additional customer purchase succeeding. Then write the definition you would put on the dashboard instead, with its exclusions, and name the one guardrail you would always read beside it.
Approach
- Enumerate the rows in the table that are not purchases: zero-amount account verifications, reversals (is_reversal = true), incremental authorizations (parent_auth_id not null) and merchant retries of a declined attempt. Each is a lever on the numerator or the denominator that no customer would ever notice.
- Name the mix levers. Recurring and card-present traffic approve at higher rates than ecommerce and cross-border, so routing changes or a marketing push into an easy channel move the blended rate with no change in decisioning quality at all.
- Work the retry arithmetic rather than asserting it. A declined purchase that is retried three times and succeeds on the fourth contributes one approval and four denominator rows, which is below a healthy blended rate, so suppressing retries raises the published number while some purchases that would have succeeded on a retry now simply fail.
- Replace the definition: dollar-weighted, retry chains collapsed to a single attempt per (card_token_id, merchant_id, amount_minor) within a 15-minute window, excluding reversals, zero-amount verifications and incremental authorizations, with all amounts converted into one reporting currency before summing because amount_minor is in the minor unit of transaction_currency and that unit is not always two decimals. Cut by channel and issuer_country so mix shift shows up as mix shift.
- Guardrail: net fraud loss in basis points of settled volume, read only on transaction months with at least 120 days of dispute maturity. The fastest way to approve more is to decline less risk, and that bill arrives two to four months later.
Worked solution 25 min
- Compute the naive rate for one week: approved rows over all rows.
- Apply the exclusions one at a time (zero-amount, is_reversal, parent_auth_id not null), recording the rate after each, so you can say what each row type was worth to the headline number.
- Add a retry-collapsing CTE keyed on (card_token_id, merchant_id, amount_minor) over a 15-minute window, keeping the last attempt in each chain, and recompute.
- Recompute dollar-weighted in a single reporting currency, then split by channel and issuer_country.
- Write the final one-line definition with its exclusions, plus the guardrail sentence.
Follow-up
- The blended rate is flat but ecommerce cross-border fell 200 basis points. How do you present that?
- Why weight by amount rather than by count, and when does the weighted version mislead?
- Your 15-minute retry window merges two genuine purchases of the same amount at the same merchant. How would you bound that error?
Approval rate rose in every band yet fell overall
Monthly application approval rate on fct_loan_application fell from 62 to 57 percent. Cut by bureau_score band, the rate rose in every band, including the null-bureau band. Columns: application_id, channel, submitted_at, requested_amount_minor, declared_annual_income_minor, bureau_score, model_pd_12m, model_version, policy_rule_hits, decision, decided_by, decision_at. The denominator is decision in ('approve','decline'). Explain the arithmetic, quantify how much of the five-point fall is mix versus within-band movement, and say what you would tell the team that owns acquisition.
Approach
- Confirm the paradox is real rather than a banding artefact. Rebuild the bands on fixed cutpoints taken from the earlier period, because quantile bands re-cut each month move with the population and can manufacture this pattern on their own.
- Compute the exact decomposition rather than describing it: within = sum of w_i0 * (r_i1 - r_i0), mix = sum of r_i0 * (w_i1 - w_i0), interaction = sum of (w_i1 - w_i0) * (r_i1 - r_i0). The three terms sum identically to the change in the blended rate, so the report can state the split.
- Attribute the weight change by cutting the same fixed bands by channel. Keep null bureau_score as its own band; a thin file is a population signal, not missing data to be imputed away.
- Check whether the new arrivals also changed the population inside a band, by comparing requested_amount_minor and declared_annual_income_minor distributions within one band across the two months.
- Deliver two numbers rather than one story: policy is looser in every band, and the funnel is being fed a different population. Those have different owners and different fixes.
Follow-up
- If the new channel is profitable at its own approval rate, is the blended fall a problem at all?
- How would you present this so that nobody reads the blended series unaccompanied again?
- What breaks if you fix the mix by reweighting to a frozen band distribution every month?
For someone who can already write the query and train the model but stalls when asked what to measure or whether a change is worth making. Metric definition and case structure come first; the technical work is kept as maintenance rather than the centre of the week.
Prepare, practise & reflect
One practical outcome each day. Spend longer where you need it.
0 / 7 done01Metric anatomy
- For three products you use daily, write one primary metric, two input metrics that plausibly move it, and one guardrail that would catch a cheap way of moving the primary at the cost of the product.
- For one of them, specify the metric precisely enough that two analysts would return the same number: numerator, denominator, unit of observation, time window, and how returning and deleted accounts are treated.
- Pick a ratio metric and write what happens to it when the denominator shrinks for reasons unrelated to the numerator, with a concrete example of that happening.
Deliverable: A one-page metric tree for one product, with the primary metric written as an unambiguous spec.
Practice prompt ↗Practice prompt ↗Practice prompt ↗Worked solution ↗02Diagnosing a drop without guessing
- Take the prompt "weekly active users fell 8 percent week over week" and write the segmentation plan before proposing any cause: platform, region, tenure cohort, acquisition channel, and whether the movement sits in the numerator or in a changed denominator.
- List the instrumentation failures that manufacture fake drops (a client release that stopped firing an event, a bot filter change, a shifted date boundary or timezone) and write the query that rules out each one.
- Rehearse stating the boring explanations first, seasonality and day-of-week composition, before reaching for a product cause.
Deliverable: A drop-diagnosis checklist short enough to recite from memory in under a minute.
Practice prompt ↗Practice prompt ↗Practice prompt ↗03Should we build it
- Take a feature idea and write it as a bet: what you believe is true, what would have to be true for it to pay off, the metric that would confirm it, and the effect size that would justify the engineering cost.
- Size the opportunity top-down and bottom-up, then reconcile the two numbers in writing instead of quoting whichever is friendlier.
- Write the counter-metric that would make you kill the feature even if it wins on the primary metric.
Deliverable: A one-page product memo ending in a decision rather than a list of considerations.
Practice prompt ↗Practice prompt ↗Practice prompt ↗04The places aggregate numbers lie
- Construct a Simpson's paradox numerically: two segments where the treatment wins within each segment yet loses overall, and identify the shift in segment weights that causes it.
- Take a heavy right-tailed quantity such as revenue per user and write why the mean is the wrong summary, which percentile you would report instead, and what a moving mean with a stable median tells you.
- Write your definition of a session for the product from day one, then name two real behaviours it misclassifies.
Deliverable: One page holding a worked Simpson's paradox table and a session definition with its two known failure cases.
Practice prompt ↗Practice prompt ↗Worked solution ↗05Technical maintenance, aimed at metrics
- Solve four timed SQL prompts that all end in a ratio metric, so the question of grain stays live in every answer.
- Compute a 95 percent confidence interval for a proportion on a small sample, and state why the normal approximation is unreliable when either np or n(1 minus p) falls below roughly 10, along with which interval you would use instead.
- Take one metric from your day-one tree, write the query that computes it correctly, then write the query that computes it wrong in the most plausible way and explain how you would notice.
Deliverable: Four solved prompts plus a matched correct and plausible-wrong query for one metric.
Practice prompt ↗Practice prompt ↗06Turning engineering work into data science stories
- Write three project stories as situation, decision, trade-off, outcome, each carrying one number and one thing you got wrong.
- For the story you will lead with, prepare an answer to "what would you do differently" that names a decision you made, not a constraint you were handed.
- Practise the sentence that reframes a systems project as a question project: the question the work answered, ahead of the pipeline it shipped.
Deliverable: Three written stories with the lead story delivered aloud and timed under four minutes.
Practice prompt ↗Practice prompt ↗07Mock case and gap list
- Run a 40-minute mock case with someone playing a product manager who pushes back on your metric choice, and record it.
- Listen back and mark every moment you proposed a solution before the success metric existed.
- Rewrite those moments as the question you should have asked, and rehearse the first 90 seconds of the case until scoping comes before solving.
Deliverable: A recorded case plus a rewritten opening 90 seconds.
Practice prompt ↗Practice prompt ↗Worked solution ↗Expand any day for tasks and deliverables. Your progress is saved on this device.
Data people depend on systems owned by other teams, and much of the job is negotiating for instrumentation, access, or a fix to a broken pipeline. Prepare an example of getting something changed upstream that you did not control. Describe what you asked for, what you traded, and how you worked while you waited.
How do you handle missing data or outliers when preparing a dataset fo…
How do you handle missing data or outliers when preparing a dataset for analysis?
Approach
- Name the disagreement or constraint, and how you resolved it with evidence.
- Quantify the outcome, including what you would not claim credit for.
- State the situation in two sentences and spend the rest on your reasoning.
Follow-up
- What would you do differently if you ran that project again?
- How did you know the outcome was caused by your change?
Explain an incomplete dispute chart to a non-technical executive
A finance lead is looking at first-chargeback rate by transaction month, built from fct_card_dispute joined to fct_payment_authorization on auth_id and attributed to requested_at. The last three months slope sharply down and the lead wants to announce a fraud improvement at tomorrow's review. Consumer dispute rights commonly run around 120 days from the transaction or expected delivery date, so those months are not complete. In five minutes, with no statistics vocabulary, explain why the decline is not yet evidence and say exactly what you would put on the slide instead.
Approach
- Lead with the mechanism in the listener's own terms, not with the statistical name for it: a dispute is attributed to the month the transaction happened, but it can be filed up to roughly 120 days later, so recent months contain only the disputes filed so far.
- Show completeness rather than arguing about the rate: for each transaction month, plot the share of its eventual disputes already filed, estimated from months that are fully matured. The last three months will sit visibly below 100 percent.
- Replace the chart with two artefacts: a matured series that stops 120 days back and is labelled final, and a development-factor estimate for the immature months drawn as a dashed range and labelled an estimate.
- Hand over one sentence the executive can repeat without you in the room: the recent months look better because the disputes have not arrived yet, not because fewer will arrive.
- Offer a weekly signal they can watch instead, such as the risk-score mix of approved volume or the decline-rule hit rate, and state up front what it does and does not predict.
Follow-up
- The deck ships tomorrow regardless. What exactly goes on the slide, and what wording do you insist on?
- How would you estimate the development factors, and how would you notice if they had shifted?
Recommend a decision whose true outcome matures a year later
An underwriting rule change must be decided in six weeks. Its real outcome, the vintage 90-plus rate at months_on_book 12 in fct_loan_performance_monthly, matures in a year. The executive wants a yes or no, not a range. Randomising the credit decision across the whole population is not available. Name the leading indicator you would accept, state its bias and the direction of that bias, define the decision rule and stopping condition before any rollout starts, and say what reading would make you recommend reversing the change.
Approach
- Fix the readout before the rollout, because a readout chosen after the data arrives is a story rather than a decision rule: indicator, window, threshold and reversal condition all go in writing first.
- Choose the leading indicator on its measured relationship to the matured outcome in historical vintages rather than on availability. Early delinquency, typically the share reaching dpd_1_29 or missing a first scheduled payment by months_on_book 3, is the usual candidate, and you quantify how well it predicted the 12-month rate across past cohorts.
- State the bias and its direction plainly: early delinquency under-represents default that emerges later and is contaminated by servicing and payment-date effects, so treat it as a floor on risk rather than an estimate of it.
- Buy identification where full randomisation is unavailable: a narrow randomised approval band around the cutoff, or a staged rollout by channel or region read as a difference-in-differences, with the parallel-trends assumption stated and checked in the pre-period rather than assumed.
- Give the executive the binary they asked for with the trigger attached in the same sentence: yes, conditional on the month-3 indicator staying inside a stated band, with an automatic hold if it breaches.
Follow-up
- How would you validate that the month-3 indicator predicts the 12-month outcome, and what evidence would invalidate it mid-rollout?
- Compliance refuses a randomised band. What is your next-best identification strategy, and what precision do you lose by taking it?
- 01
How do you handle missing data or outliers when preparing a dataset for analysis?
- 02
A finance lead is looking at first-chargeback rate by transaction month, built from fct_card_dispute joined to fct_payment_authorization on auth_id and attributed to requested_at. The last three months slope sharply down and the lead wants to announce a fraud improvement at tomorrow's review. Consumer dispute rights commonly run around 120 days from the transaction or expected delivery date, so those months are not complete. In five minutes, with no statistics vocabulary, explain why the decline is not yet evidence and say exactly what you would put on the slide instead.
- 03
An underwriting rule change must be decided in six weeks. Its real outcome, the vintage 90-plus rate at months_on_book 12 in fct_loan_performance_monthly, matures in a year. The executive wants a yes or no, not a range. Randomising the credit decision across the whole population is not available. Name the leading indicator you would accept, state its bias and the direction of that bias, define the decision rule and stopping condition before any rollout starts, and say what reading would make you recommend reversing the change.
Is this an official SCOR interview guide?
No. It is PracHub's own research and practice material for the Data Scientist role at SCOR. Rounds and questions reflect what candidates have reported, not a process SCOR has published, and they change over time. Confirm the current format and scope with your recruiter.
PracHub interview research ↗How difficult are the technical interviews?
The difficulty is generally balanced. Expect to be challenged, but the questions focus on applying fundamental concepts to practical scenarios rather than obscure theoretical puzzles.
PracHub interview research ↗What is the best way to prepare for the behavioral portion?
Use the STAR method (Situation, Task, Action, Result) to structure your answers. Focus on highlighting your ability to lead, handle ambiguity, and collaborate with cross-functional teams.
PracHub interview research ↗How long does the hiring process usually take?
The timeline varies, but from the initial screen to the final interview, you should plan for a multi-week process that allows for thorough evaluation.
PracHub interview research ↗Sources & methodology 3 sources ↗
No official company page is cited. Rounds and questions come from candidate reports and PracHub editorial material; each source shows the date it was read.
- 01PracHub interview research ↗
PracHub editorial research into this company and role, maintained with this guide. Candidate-reported, not an employer publication.
PracHub page · Accessed 2026-09-22 - 02PracHub Data Scientist practice ↗
Cross-company practice questions for this role.
PracHub page · Accessed 2026-09-22 - 03PracHub interview preparation framework ↗
The framework the preparation plan follows.
PracHub page · Accessed 2026-09-22
Explore related engineering environments and compare the preparation focus.
1st Central Data Scientist Interview Questions & Guide 2026
Causal-inference exercises for 1st Central data scientist prep: difference-in-differences, matching, instrumental variables, and knowing when observational data simply cannot answer the question asked.
3M Data Scientist Interview Questions & Guide 2026
Communication practice for 3M data scientist candidates: turn an analysis into a recommendation, name the uncertainty honestly, and answer the follow-up a skeptical stakeholder will raise.
ValueLabs Data Scientist Interview Questions & Guide 2026
Causal-inference exercises for ValueLabs data scientist prep: difference-in-differences, matching, instrumental variables, and knowing when observational data simply cannot answer the question asked.
vConstruct Data Scientist Interview Questions & Guide 2026
Communication practice for vConstruct data scientist candidates: turn an analysis into a recommendation, name the uncertainty honestly, and answer the follow-up a skeptical stakeholder will raise.