As a Software Engineer at Seaspan Corporation, you are joining a leader in the global maritime industry. While the title may span various technical and operational engineering ranks, the core of your role involves maintaining the high-performance standards required for world-class vessel operations. You will be responsible for ensuring that the complex systems powering these vessels operate with maximum efficiency, safety, and compliance.
Your work directly impacts the reliability of maritime infrastructure and the safety of the crew and environment. You will be expected to bridge the gap between sophisticated technical requirements and practical, real-world application. This role is inherently dynamic, requiring a balance of deep technical expertise in shipboard machinery, environmental safety, and the ability to operate effectively within the structured, high-stakes environment of international shipping.
Initial Screening
reportedThe person on this call usually cannot evaluate your code and does not need to. They write a short paragraph, and that paragraph is what a hiring manager skims when deciding who to put on your loop. So the test is not whether your work was hard, it is whether a non-engineer can repeat it correctly. Name systems by what they did rather than by their internal codename, give each project a shape (what was breaking, what you changed, what happened after), and keep the whole walkthrough near ninety seconds. Depth that cannot survive a paraphrase reads as vagueness.
What to demonstrate
- Whether a non-engineer can restate your projects without distorting them, since their paraphrase is what travels to the hiring manager, not your sentences
- Whether each project has a shape rather than a stack list: the failure or constraint, the change you made, the result and how it was measured
- Whether you can say what was yours inside a team project without either inflating it or disappearing into the plural
How to prepare
- Rewrite each headline project as two sentences with no internal system names and no acronyms outside your company, then say them to someone outside engineering and have them repeat them back. Fix whatever came back wrong
- Attach one measured number to each project: the baseline, the change, and the window it was measured over. Where nothing was ever measured, say that plainly rather than reaching for a plausible percentage
- Time the background walkthrough against a clock. If it runs past two minutes, compress the earliest role to a single clause and spend the recovered time on the most recent one
Technical Evaluations
reportedInput bounds are the part of the prompt most often skimmed, and they usually contain the answer. They tell you which complexity class is admissible, which narrows the search before you have thought about the problem itself. As a rough planning figure, a compiled language does on the order of 10^8 simple operations per second and an interpreted one roughly an order of magnitude less. So n up to about twenty admits enumerating subsets, a few thousand admits a quadratic pass, and a million admits neither: you need near-linear, or linear with a log factor. If the bounds are missing, ask for them.
What to demonstrate
- Whether the approach is justified by the stated input size rather than by whichever pattern you recognised first
- Whether you ask about the properties that change the algorithm: whether the input arrives sorted, whether duplicates occur, whether values are bounded integers, whether it all fits in memory
- Whether you can name the bottleneck in your own solution and what would remove it, even when you deliberately leave it in place
- Whether a claimed speedup is real, since memoising a recursion only helps when subproblems genuinely overlap and the state can be keyed cheaply
How to prepare
- For each algorithm you rely on, write down the largest n it handles in roughly a second, then check two of those figures by timing them in the language you will actually type in
- For two weeks, write one line naming your target complexity and the bound that justifies it before you write any code, then compare that line with what you ended up submitting
- Practise the conversion backwards: given a required O(n log n), list the mechanisms that get you there (sorting, a heap, an ordered map, divide and conquer) and choose by what the problem needs to query, not by what you used last
Background Checks
reportedYou cannot drill a format you do not know, so put the preparation into material that travels. Three pieces of your own work, each rehearsed until you can take a follow-up you did not anticipate, will carry a conversation or a code walkthrough equally well. Specificity is what separates that from filler. A number needs its definition before it means anything: a p99 is over some window and measured at some hop, and a server-side figure excludes the queueing and network time a client would see. The number you cannot qualify is the one to leave out.
What to demonstrate
- Whether your examples carry detail only someone who did the work would hold, such as what the binding constraint actually was, which alternative you rejected and why it was worse, and what you measured on each side of the change
- Whether a number survives one follow-up, meaning you can say what it was measured over and whether it moved because of your change or merely alongside it
- Whether a failure is described with the specific change that followed it, rather than a lesson stated in general terms
- Whether your part in a team effort is stated accurately, including what other people did
How to prepare
- Write a page on each of three projects covering the constraint, the option you rejected, the measurement before and after, and what went wrong. Cut any line you cannot take a follow-up on, since you are writing the parts you will be pressed on rather than a summary.
- Recover the real figures while you still have access: request volume, data size, latency with its percentile and window, team size, timeline. Note where each came from, whether a dashboard, a design document or memory, and mark the estimates so you can say which they are out loud.
- Take your weakest project story to someone who works in a different area and have them ask why four times in succession. The point where you run out of answer is the part to go and re-read before the round.
Deep-Dive Assessments
reportedWhat this round decides is narrow: whether you can produce code that runs and is correct on inputs nobody showed you. An elegant solution that does not compile scores below a plain one that does, so write a correct brute force first, say out loud that you know its cost, and improve it with the working version still on screen. What separates strong answers is who finds the broken case. Trace your own code against an empty input, a single element, and duplicate keys before you say you are finished, because being told is far more expensive than noticing.
What to demonstrate
- Whether degenerate inputs get checked without being asked for: an empty collection, one element, every element equal, and the extreme value the input type allows
- Whether the complexity you state matches the code you actually wrote, including a sort or a copy sitting inside a loop
- Whether the finished answer is verified against the worked examples before you call it done, rather than assumed correct because the code reads correctly
How to prepare
- Take five problems you have already solved and, without running anything, write down what each returns for empty input, a single element, and all-duplicates. Then run them and count how many you predicted wrong.
- Drill the brute force as its own skill: on ten problems, write only the obviously-correct slow version and time how long it takes to get it passing. If that is more than a few minutes, that is what to practise, not the optimal version.
- Add a fixed last step before you submit anything, reading only the loop bounds and the initial value of each accumulator, which is where most off-by-one errors live
Final Evaluations
reportedWhere the day includes a partner from product, design or data, that conversation is weighted like the technical ones and prepared for least. They are deciding one thing: whether having you in the room makes their decisions cheaper. That means options with costs attached, not implementation detail and not "it depends". An estimate someone can plan against — a range, the assumption that would push it to the high end, and what you would drop to hit the low one — is worth more than a confident single number, which everyone present already knows is wrong.
What to demonstrate
- Whether an estimate comes as a range with the assumption most likely to break it, and states what a specific scope cut would actually buy
- Whether a technical constraint is handed over as a choice with consequences on their side, rather than as a verdict they have no standing to argue with
- Whether you establish what decision is on the table before proposing anything
- Whether risk is raised while it can still change the plan, with the trigger that would confirm it, instead of reported afterwards as a slip
How to prepare
- Take a project that shipped late and write the two-sentence warning you could have given three weeks earlier, naming what you would have needed decided at that point
- Rehearse one estimate out loud until it arrives in three parts: the range, the single assumption that would blow it, and the smallest thing you would cut to protect the date
- Rewrite an objection you have actually made — the "we can't do that" version — as two options with their costs, so the choice ends up with the person who owns it
PracHub editorial advice for the preparation topics above.
Letting a slow dependency consume unbounded concurrency
The failure that takes a service down is usually not an error but a delay. A dependency answering in thirty seconds instead of fifty milliseconds holds each request's worker or connection six hundred times longer, and since required concurrency is arrival rate times latency, a fleet sized for sixty in-flight requests now needs thirty-six thousand to sustain the same rate - so it queues, and requests whose clients have already abandoned them still occupy resources. Retries make it precisely worse: a policy of three attempts triples the load on a dependency at the exact moment it is least able to serve, which is how one slow dependency becomes an outage of everything sharing that pool. Containment is four specific things - a timeout on every outbound call shorter than the caller's remaining budget, a bounded pool per dependency so one cannot starve the others, backoff with full jitter rather than a fixed delay so retries do not resynchronise, and a circuit that stops sending once the failure rate makes an attempt pointless.
Choosing an index from the columns a query mentions rather than from how it filters and orders
A composite B-tree index on (a, b, c) can be seeked only as a left prefix: equality on a, then equality on b, then a range or an ordering on c. A query that filters on b alone cannot seek into it at all and at best gets a full scan of the index; a query that filters a and ranges on b gets no benefit from c, because the index is only sorted by c within a fixed (a, b) pair. The practical consequence is that one index per column is close to useless for multi-predicate queries while a single correctly ordered composite index turns a scan into a lookup. The ordering half is what gets missed: if the index cannot satisfy the ORDER BY, the database must read every matching row and sort before the limit can apply, so a LIMIT 20 over a million matching rows still reads a million rows.
Comparing floating-point values for equality, or holding money in them
Binary floating point cannot represent 0.1 exactly, so repeated addition drifts and an equality check fails on values that are mathematically equal. Store currency as integer minor units or a decimal type, and compare floats against a tolerance you chose for a stated reason.
A queue or buffer with no bound
Every producer-consumer boundary needs a capacity and a policy for reaching it: block the producer, shed load, or drop the oldest entry. Unbounded buffering converts a temporary slowdown into memory exhaustion and hides the backpressure signal that would have revealed the consumer was falling behind.
Choose a category, try a prompt, then open its approach, worked solution or follow-up when you need it.
Diff a projection against the primary without per-row point reads
The listing projection has drifted and some rows show a stale version. The primary holds 40,000,000 resource rows across 12,000 tenants while serving 1,200 writes and 14,000 reads per second. The obvious repair, reading each resource row and comparing its version against the projection, is correct and would eventually finish. Explain precisely why it is unacceptable here, then give a diff that finds the differing rows, state its complexity, and make it safe to run against a live primary. Replication lag is usually under 100 ms and is not bounded.
Approach
- Quantify the naive cost rather than calling it slow: 40,000,000 point reads at even 0.5 ms each is over five hours serialised, and the only lever is concurrency, which is exactly what you cannot spend. The primary's pool is sized for the write path, and 40,000,000 random reads evict the buffer cache that sustains the 85 percent cache hit rate, so the audit degrades the system it is auditing.
- Replace random access with one ordered pass per side. Both sides can be read in (tenant_id, resource_id) order, which is a sequential scan on each and a merge join in O(n) time and O(1) memory. For a dense diff that is the whole answer, and it reads the primary once instead of 40,000,000 times.
- For the expected sparse case, compare range hashes instead of rows: partition the key space, compute per range an order-independent aggregate over hash(resource_id, version), compare aggregates, and descend only into ranges that differ. With d differing rows and branching factor B, at most d ranges mismatch per level, so the drill-down examines O(d log_B(n/d)) ranges and reads full rows only in mismatching leaves.
- Aggregate with a sum modulo 2^64 or a multiset hash, never XOR. XOR is order-independent but self-cancelling, so two rows wrong in the same way, or a row duplicated on one side, leave the range aggregate matching and the range is declared clean.
- Pin the comparison to a point in time or it reports lag as drift: consider only rows whose updated_at is older than now minus a lag margin, and re-check each candidate mismatch individually before repairing. At 1,200 writes per second a diff without this reports thousands of false positives, and an unattended repairer would then overwrite live rows with stale values.
- Make the run resumable and throttled: batch by range key, persist the last completed range, and watch a signal such as replica lag or primary CPU, pausing rather than pressing on. A reconciliation that cannot be stopped and resumed gets killed halfway and restarted from zero, which is how a repair becomes an incident.
Follow-up
- The diff reports 900 stale rows. How do you decide between patching those rows and rebuilding the projection from resource_revision?
- Same job, but the projection lives in a search index that cannot be scanned in key order. What changes?
- How would you run this continuously at low cost instead of only as incident response?
Merge partitioned event streams into one ordered feed with bounded lateness
The read-model service consumes 64 log partitions carrying about 4,000 events per second in total. Each partition is ordered within itself, but partitions drift by up to 30 seconds, and the activity feed must present a tenant's events in occurred_at order. Produce the merge. State its complexity, the buffer it requires in events and in bytes, what happens when one partition is idle, and what you do with an event that arrives after you have already emitted its position. Payloads average 1 KB.
Approach
- Merge with a min-heap over the 64 partition heads keyed on (occurred_at, event_id): O(log P) per event and O(n log P) overall. The tie-break on event_id is what makes the output deterministic when two partitions carry the same millisecond, which matters because the feed is paginated and a non-deterministic order reorders pages under the reader.
- Emitting the heap head is only correct once every partition has produced everything up to that timestamp, so the emit condition is a watermark: the minimum across partitions of the highest occurred_at seen, less the allowed lateness. Events are held until the watermark passes them, which is what turns individually ordered streams into a jointly ordered one.
- Size the buffer from the lateness rather than guessing: 4,000 events per second times 30 seconds is 120,000 buffered events, and at 1 KB each about 120 MB of heap. That number is the real price of the ordering guarantee and belongs in front of whoever asked for it.
- Handle the idle partition explicitly, because it fails the feed rather than corrupting it: a partition with no traffic never advances its own maximum, so the watermark freezes and output stops entirely. Either every partition emits a periodic idle marker carrying the broker's current time, or the watermark falls back to wall clock for a partition silent beyond a threshold.
- Choose the late-event policy from what the projection is keyed on. The projection upserts on (aggregate_id, aggregate_version) and discards a version it has already applied, so a late event is safe to apply out of order and correctness never depended on the merge at all. Apply it, recompute the affected feed page, and count lateness so the 30-second budget can be re-derived from data rather than folklore.
- Say what the merge does not buy: ordering is guaranteed within one aggregate by the log's partitioning, and no watermark makes the cross-aggregate order authoritative. Two events from different aggregates in the same millisecond have no true order, so the feed's order is a presentation choice that must be stable rather than correct.
Follow-up
- The lateness budget is raised to five minutes. What is the new buffer, and what besides memory changes?
- The consumer restarts. Where does it resume from, and what does the feed look like for the first 30 seconds?
- One partition is ten minutes behind because its producer is slow. Do you stall the feed or emit without it?
Archive a resource graph without breaking live references or recursing
Resources reference other resources within a tenant; for the largest tenant the reference table holds up to 2,000,000 nodes and 8,000,000 edges. Archiving a resource must archive everything reachable from it that nothing outside the set still references, refuse when a live external referrer exists, and terminate when references form cycles, which they legitimately do. Produce the archive order and the refusal list, targeting O(V+E). Say what stops the traversal crossing a tenant boundary, and why recursion is the wrong control structure at this size.
Approach
- Load the subgraph with the tenant predicate on both endpoints of the edge, not only on the side you started from. Scoping the left table alone is the classic cross-tenant leak: one mis-entered edge then pulls another tenant's resources into the traversal and, worse, into the archive.
- Traverse iteratively with an explicit stack. A 2,000,000-node graph can hold a chain deep enough to exhaust a native stack in the low tens of thousands of frames, and that failure is a process crash rather than an error you can return.
- Treat cycles as data rather than corruption: compute strongly connected components with Tarjan in O(V+E) using its own explicit stack, then condense. The condensation is a DAG, so a topological order over it gives the archive order, and every member of a component archives in one transaction because no order within a cycle is valid.
- Decide refusals with reverse edges. A candidate is archivable only if every in-edge originates inside the candidate set, so build the transpose or count in-degrees restricted to the visited set, and emit each blocked resource with the id of the external referrer, which is the only part of the answer an operator can act on.
- Store the graph as CSR rather than a map of lists: an offsets array of V+1 8-byte entries plus E 8-byte targets is about 80 MB at this size, where boxed adjacency lists cost several times that and lose cache locality on every hop.
- Run Kahn over the condensation for the order in O(V+E). If the emitted count is short of the component count the condensation step itself is wrong, since a condensation cannot contain a cycle, which makes the check free.
Worked solution 30 min
- Write the edge-loading query with the tenant predicate on both endpoints and state what it does with a cross-tenant edge.
- Implement iterative Tarjan with an explicit stack and confirm on a three-node cycle that it emits one component of size three.
- Build the transpose restricted to the visited set and mark every node with an in-edge from outside it as refused, carrying the referrer id.
- Run Kahn over the condensation and verify the emitted order against the referrer-before-referenced rule.
- Size the CSR arrays for 2,000,000 nodes and 8,000,000 edges and compare against a boxed adjacency map.
Follow-up
- The graph is read in one query and the archive writes a minute later. What can change in between, and how do you make the write safe?
- The candidate set is 400,000 resources. Is that one transaction, and if not, what does a half-finished archive look like to a reader?
- An edge points at a resource in another tenant. Is that a refusal, an error, or an alert?
Replace offset paging on the resource feed with keyset
resource holds resource_id, tenant_id, owner_user_id, title, body_ref, version, status ('draft','active','archived','deleted'), created_at, updated_at, deleted_at, with an index on (tenant_id, status, updated_at DESC, resource_id DESC). The listing endpoint returns active resources for one tenant, newest update first, 50 per page, today with LIMIT 50 OFFSET n. Tenants reach page 400 and rows are created while they read. Write the keyset query, define what the cursor carries and how it is encoded, and say which part of the index each predicate uses. Assume PostgreSQL 16.
Approach
- Name the two failures separately. OFFSET 20000 makes the server produce and discard 20,000 rows, so page cost grows with depth rather than with page size. Independently, any write that changes how many rows sort above the offset moves the window between two fetches, and the direction decides which anomaly you get: an insert lands at the head of updated_at DESC and pushes already-returned rows down past the boundary, so they are returned a second time; a delete above the offset, or a row whose updated_at is bumped above the cursor, pulls rows up and one is never returned at all. Nothing in the response reveals either.
- Write the seek: WHERE tenant_id = $1 AND status = 'active' AND (updated_at, resource_id) < ($2, $3) ORDER BY updated_at DESC, resource_id DESC LIMIT 50. The row-value comparison is one index range rather than a disjunction, and both columns are NOT NULL, which is what makes that comparison well defined.
- Map each predicate onto the index: tenant_id and status are equality on the leading columns, (updated_at, resource_id) is the range, and the ORDER BY matches the index order so no Sort node appears and the scan stops after 50 rows. The DESC in the definition only matters for mixed directions — a plain ascending btree on the same columns is read backwards for this query.
- Put both sort columns in the cursor and nothing the client can tamper with into another tenant: base64 of (updated_at, resource_id), validated server-side, with tenant_id taken from the principal.
- State the residual honestly. Keyset is stable against concurrent inserts and deletes, but not against a row whose updated_at changes mid-scroll — that row moves in the ordering and can be seen twice. If the feed must be a snapshot, order by an immutable key or bound the page set with updated_at <= the cursor's start value.
- Keep a total out of the page path. A tenant-wide COUNT(*) is the scan keyset just removed; fetch LIMIT 51 and return has_more instead.
Worked solution 25 min
- Seed one tenant with 500k active resources, 2% of them sharing an identical updated_at.
- Time LIMIT 50 OFFSET 0 against OFFSET 20000 and record rows-read from EXPLAIN (ANALYZE, BUFFERS) for each.
- Page the whole set with the keyset query while an insert-only writer adds 100 rows/second, collecting resource_ids, and repeat the run with OFFSET.
- Repeat both runs under a second writer profile that also deletes 20 rows/second from pages already returned and bumps updated_at on 20 more, and diff each collected id set against the rows that existed for the whole run.
- Remove resource_id from the cursor so the seek degrades to updated_at < $2, and re-run the tie-heavy section of the feed.
Follow-up
- The client asks for 'jump to page 400'. What do you offer instead, and what does the honest version cost?
- Sort order becomes user-selectable across four columns. How many indexes is that, and which would you refuse to add?
- What does the cursor do when the row it points at has since been deleted?
Hold a per-tenant active cap against concurrent creates
A tenant on the standard plan may hold at most 50 resources with status='active'. The create handler runs SELECT count(*) FROM resource WHERE tenant_id = $1 AND status = 'active', compares to 50, then inserts. Two creates arrive 3 ms apart on different instances and the tenant lands at 51. Name the anomaly, say whether PostgreSQL 16 READ COMMITTED or REPEATABLE READ prevents it and why, then give an implementation that holds the cap at READ COMMITTED with the exact statements. Finally, say what changes when the cap is 'at most one running export per tenant' on job_run.
Approach
- Name it: write skew. The two transactions read an overlapping set and write disjoint rows, so there is no row-level conflict for the engine to detect and each commit is individually legal.
- Rule out the levels precisely. READ COMMITTED takes a fresh snapshot per statement and takes no lock on the counted rows, so both see 49. PostgreSQL's REPEATABLE READ is snapshot isolation: it removes non-repeatable reads and phantoms within the snapshot but still admits write skew, because the anomaly is not a re-read of a changed row, it is a read of a set that a concurrent transaction invalidates. Only SERIALIZABLE closes it, by tracking the read dependency and aborting one transaction with SQLSTATE 40001 — a guarantee that exists only if the application re-runs the whole transaction from the read.
- Convert the set predicate into a single-row conflict: keep tenant.active_resource_count and run UPDATE tenant SET active_resource_count = active_resource_count + 1 WHERE tenant_id = $1 AND active_resource_count < 50 in the same transaction as the INSERT. Zero affected rows is the cap, returned as 409. The row lock serialises the decision at any isolation level, and contention is bounded to one tenant's row — which is also the fair-scheduling unit, unlike a global counter that would convoy every tenant behind one row.
- State the cost you just took on: a counter is a second source of truth that can drift, so every path that changes status must adjust it inside the same transaction, and a periodic reconciliation has to exist, with resource_revision as the authority for what the count should have been.
- For the job case the invariant is expressible per row, so let the database hold it: a partial unique index on job_run (tenant_id, job_type) WHERE status IN ('queued','running') makes a second running export unwritable and the loser takes 23505, mapped to 409. That is strictly better than a counter — no drift, no reconciliation — and it is available only because the cap is one rather than fifty.
- Add the retry discipline each route demands: under SERIALIZABLE both 40001 and deadlock 40P01 are retryable and the retry must re-execute the read, while under READ COMMITTED with the counter nothing retries, because the conflict is reported to the caller rather than raised as an error.
Follow-up
- A resource moves from archived back to active. Which statements change, and what breaks if the counter update and the status change land in different transactions?
- The cap becomes plan-dependent and a plan can change mid-month. Where does the number 50 live, and who reads it?
- How do you detect after the fact that the counter drifted, without locking the table?
Do you have working knowledge in Quality Management Systems?
Do you have working knowledge in Quality Management Systems?
Approach
- Say what you would check first and why it is the highest-information step.
- State your assumptions explicitly before working the problem.
- Clarify what is being asked and what a complete answer contains.
Follow-up
- What assumption would you test first?
- How would you know your answer was wrong?
Can you explain your approach to ship safety protocols under pressure?
Can you explain your approach to ship safety protocols under pressure?
Approach
- Work from the requirement backwards to the design.
- Say what you would check first and why it is the highest-information step.
- Clarify what is being asked and what a complete answer contains.
Follow-up
- What assumption would you test first?
- How would you know your answer was wrong?
Convert the listing endpoint from offset pages to stable cursors
GET /v1/resources returns a tenant's resources newest-updated first, today with page and per_page, backed by index (tenant_id, status, updated_at DESC, resource_id DESC). Callers are a browser feed and a nightly sync job that walks every page. Users report items appearing twice or vanishing between pages, and page 400 is slow. Design the cursor contract: what the cursor contains and how it is encoded, the exact WHERE and ORDER BY, what happens when a row's updated_at changes mid-walk, how a client detects the end, and what the sync job does when a cursor is rejected.
Approach
- Separate the two defects, because they have different fixes. Cost: OFFSET n makes the engine produce and discard n rows, so price grows with page depth rather than page size and page 400 pays for 400 pages of work. Correctness: while the set shifts, rows cross the offset boundary and are skipped or repeated, and nothing in the response lets the client detect it.
- Write the seek: WHERE tenant_id = $1 AND status = $2 AND (updated_at, resource_id) < ($k, $id) ORDER BY updated_at DESC, resource_id DESC LIMIT n. The tie-break is not decoration - updated_at is not unique, and two rows sharing a timestamp across a page boundary reintroduce exactly the skip this was adopted to remove. PostgreSQL seeks the composite index on the row-value comparison directly; on an engine that does not optimise a row constructor, expand it into the equivalent OR form or the plan quietly degrades to a scan.
- Encode the cursor as an opaque token carrying the sort key, the id, and a fingerprint of the filter and sort order, signed or at minimum validated. A cursor replayed against a different sort or filter must be a 400 with its own code, not a silently wrong page - the sync job cannot notice the difference otherwise.
- State the guarantee precisely rather than generously. Keyset is stable against inserts and deletes elsewhere in the set, because the position is a value and not a count. It is not a snapshot: updated_at is mutable, so a row that is edited during the walk re-sorts and may be seen twice or not at all. If the sync job needs exactly-once coverage, order on an immutable key such as (created_at, resource_id), or walk resource_revision by revision_id and treat updated_at as data.
- Define termination and limits in the response, not in the client's inference: fetch n+1 rows, return n, and emit next_cursor only when the extra row existed. Absence of next_cursor is the sole end signal, because a page can legitimately come back short when rows are filtered after retrieval. Cap n and document the cap rather than honouring per_page=10000.
- Migrate without a flag day: keep page and per_page working, add the cursor, count usage per credential, and remove the offset path only once the sync job's traffic on it is zero.
Worked solution 25 min
- Write the old and new queries side by side and state the rows examined for page 400 under each.
- Define the cursor payload field by field, including the filter and sort fingerprint, and choose the encoding.
- Write the end-of-results rule and the cap, then the 400 response for a cursor that does not match the current query.
- Construct the mid-walk edit case: a row updated between page two and page three, and say exactly what the client sees.
- Write the deprecation plan for page and per_page, including the signal that says removal is safe.
Follow-up
- The client wants a total count and the ability to jump to page 400. What can you honestly offer instead, and what does each option cost?
- How do you paginate backwards, and what does that require of the index?
Every query on one table stalls for forty seconds mid-deploy
During a release on PostgreSQL, every query touching resource times out for about 40 seconds and then recovers with no intervention. The release ran one migration, ALTER TABLE resource ADD COLUMN archived_reason TEXT, and the migration log shows it completing in 6 ms. Unrelated tables showed no change in error rate. Explain how a 6 ms statement caused a 40-second stall, give the ordered checks you would run on a live system to confirm it, and give the migration procedure that prevents a repeat.
Approach
- Separate the statement's duration from the lock's duration. ADD COLUMN with no default is a catalogue-only change and genuinely runs in milliseconds, but it requires ACCESS EXCLUSIVE, and it cannot acquire that until every transaction already touching the table has finished.
- Account for the queueing, which is the part that surprises people. A lock request that is waiting blocks later requests for conflicting modes behind it rather than letting them overtake, so one long-open transaction holds the DDL and the DDL holds all the traffic. The stall length is set by the longest open transaction, not by the size of the change.
- Confirm on a live system in this order: pg_stat_activity for that table ordered by xact_start, looking for the oldest transaction and specifically for state = idle in transaction; then pg_locks where granted = false to find the waiter; then join them on pid to name blocker and blocked. pg_blocking_pids() does that join for you and is the fastest single call.
- Prevent rather than merely time it better. Set lock_timeout to a second or two on the migration session so the DDL abandons the queue after a bounded wait and is retried, instead of holding it for as long as the oldest transaction lives. Be exact about what that buys: queries arriving during the wait still queue behind the pending ACCESS EXCLUSIVE request, so each attempt costs them up to one lock_timeout of added latency. The outage goes from 40 seconds to about one second per attempt, not to zero. Also run migrations away from deploy-time peaks, and put a statement timeout and an idle-in-transaction timeout on the analytics role that opens the long transactions.
- Know the lock each change takes, since the mitigation differs by change. A column with a non-volatile default is a metadata-only change from PostgreSQL 11 and still needs the brief ACCESS EXCLUSIVE; an index needs CREATE INDEX CONCURRENTLY, which cannot run inside a transaction block and leaves an INVALID index to drop if it fails; a check or foreign key is added NOT VALID and then VALIDATE CONSTRAINT as a separate statement under a weaker lock.
Follow-up
- The same release also wants NOT NULL on that column. What is the sequence that gets there without a long lock?
- Your lock_timeout retry fails ten times in a row because the analytics transaction is always open. What do you change?
- How does this differ on MySQL with InnoDB online DDL, and what is the equivalent of the waiting-lock queue there?
For someone who has spent the last few years shipping features and reading other people's code, and who has not solved a timed problem from a blank file in a long time. Five days rebuild the primitives and the patterns that sit on them, working from invariants rather than remembered solutions, and the last two attach that back to the rest of the loop.
Prepare, practise & reflect
One practical outcome each day. Spend longer where you need it.
0 / 7 done01Rebuild the primitives by implementing them
- Implement a dynamic array with doubling growth and an operation counter, then change the growth rule to add a fixed sixteen slots instead, and time both for n of ten thousand, a hundred thousand and a million. The fixed-increment version resizes n/16 times at O(n) each, so its total work is quadratic; doubling is what makes append amortised constant.
- Implement a hash map with separate chaining and a load-factor resize, then insert ten thousand keys engineered to land in one bucket and record what happens to lookup time, so that average-case O(1) becomes a claim with a stated precondition rather than a reflex.
- For dynamic-array append and hash-map insert, write down which cost is amortised rather than worst-case, which single operation pays the whole bill, and what a system with a hard per-operation deadline would have to do instead.
Deliverable: Two working implementations plus a timing table showing the input at which each structure's advertised complexity stops holding.
Practice prompt ↗Practice prompt ↗Worked solution ↗02Arrays under an invariant: two pointers, sliding window, binary search
- Solve longest-subarray-with-sum-at-most-K using a sliding window, then run it on an input containing negative numbers and watch it return the wrong answer: extending the window only moves the sum monotonically when every element is non-negative, and that precondition is the whole reason the technique works.
- Write the binary search that finds the first index satisfying a predicate rather than an exact value, put the loop invariant above the loop in a comment, and verify termination on the two inputs that break careless versions: the empty range, and a range where every element satisfies the predicate.
- Compute the midpoint as lo + (hi - lo) / 2 and write one line on why the obvious (lo + hi) / 2 is a genuine defect in a fixed-width integer type and a non-issue in a language with arbitrary-precision integers.
Deliverable: Three solved problems, each with its invariant written above the loop, plus one recorded input on which the sliding window is provably wrong.
Practice prompt ↗Practice prompt ↗03Sorting, heaps, and the greedy argument that has to be proved
- Solve one top-k problem three ways, by full sort, by a size-k heap, and by quickselect, then write the values of n and k at which each becomes the right choice, along with quickselect's quadratic worst case and why a randomised pivot makes that unlikely rather than impossible.
- Implement bottom-up heapify and count sift-down steps to confirm it does linear work rather than n log n, because most nodes sit near the bottom of the tree and therefore move only a short distance.
- Take interval scheduling by earliest finishing time and write the exchange argument out in full: given any optimal schedule, swapping in the earliest-finishing interval keeps it feasible and no smaller. Then construct the weighted variant where that same greedy fails and name what has to replace it.
Deliverable: A three-way top-k comparison with measured crossover points, one written exchange argument, and one counterexample to a greedy rule that looks almost identical.
Practice prompt ↗Practice prompt ↗04Recursion, memoisation, and the step to a table
- Take one problem with overlapping subproblems, such as edit distance or coin change, instrument the plain recursion with a call counter to show the blow-up, then add memoisation and re-count.
- Convert the memoised version to a bottom-up table and state the two properties you relied on: each subproblem's result depends only on its arguments, and the dependencies form a DAG you can enumerate in order.
- Rewrite one deep recursion with an explicit stack, then find the input length at which the original hits the interpreter's frame limit, which defaults to about a thousand frames in CPython, so you know when the rewrite is required rather than decorative.
Deliverable: One problem in three forms, naive, memoised and tabulated, with call counts for each and the input length at which recursion depth becomes the binding constraint.
Practice prompt ↗Practice prompt ↗Worked solution ↗05Graphs, where most of the work is choosing the traversal
- Implement BFS and DFS over one adjacency list, then answer for each which finds a shortest path in an unweighted graph and which you would use to detect a cycle in a directed graph, including why the in-progress versus finished distinction matters for the second.
- Implement topological sort by in-degree, feed it a graph containing a cycle, and confirm the failure signature is that fewer than V nodes come out rather than an exception, then note that the order it produces is one of several valid ones.
- Run a shortest-path search on a graph with a single negative edge weight and show the wrong answer, then write the precondition Dijkstra actually needs, non-negative weights, because it finalises a node's distance the first time that node is popped, and name the algorithm you would switch to and its own limit.
Deliverable: A small graph library with BFS, DFS and topological sort, plus two inputs that produce documented wrong answers under the wrong algorithm choice.
Practice prompt ↗Practice prompt ↗06One day for everything that is not an algorithm
- Sketch one system only to the depth a coding-heavy loop tends to reach: the endpoints, what the service stores, and the single query pattern that decides the schema. Stop at twenty-five minutes.
- Prepare the project answer for an interviewer who codes, which means rehearsing the two levels they push to: the specific thing you built, and why you chose that approach over the alternative they will name. Open with a number and be ready to say what it excludes.
- Prepare the answer to what you would do differently, choosing a real technical mistake with a specific fix rather than a complaint about process or staffing.
Deliverable: One design sketch at endpoint-and-schema depth, plus a project answer rehearsed to two levels of follow-up.
Practice prompt ↗Practice prompt ↗07Solve out loud, under time
- Do three timed problems at twenty-five minutes each in a plain editor with no autocomplete and no execution until the end, then tally separately the failures that were syntax and the ones that were approach, because those two numbers call for different fixes.
- Narrate one solution from the first sentence, stating the approach and its complexity before writing any code, and rehearse the sentence you will use when you realise mid-solution that the approach is wrong.
- Re-solve from blank the two problems you were slowest on this week and compare the times against the day they first appeared.
Deliverable: A recording of one fully narrated solution and a tally that separates syntax failures from approach failures.
Practice prompt ↗Worked solution ↗Expand any day for tasks and deliverables. Your progress is saved on this device.
For anything that touched live traffic, be ready to say how you would have undone it: a flag, a staged rollout, dual writes with the old path still authoritative. Once the old column is dropped or the source rows are overwritten there is no reverse, so name what you kept a copy of and for how long.
Describe a time you had to make a difficult decision regarding vessel …
Describe a time you had to make a difficult decision regarding vessel safety.
Approach
- Pick a story where you made the decision, not one where you watched it.
- Close with what you would do differently, concretely.
- Give the blast radius: what could have broken, and what you measured.
Follow-up
- What did you decide not to do, and why?
- How did you know your change caused the improvement?
How do you manage professional relationships with senior officers and …
How do you manage professional relationships with senior officers and superintendents?
Approach
- State the situation in two sentences and spend the rest on the reasoning.
- Give the blast radius: what could have broken, and what you measured.
- Pick a story where you made the decision, not one where you watched it.
Follow-up
- How did you know your change caused the improvement?
- What would you do differently if you ran that again?
Can you walk us through your relevant experience and specific projects…
Can you walk us through your relevant experience and specific projects you have managed?
Approach
- Name the disagreement and how you resolved it with evidence.
- Pick a story where you made the decision, not one where you watched it.
- Close with what you would do differently, concretely.
Follow-up
- What did you decide not to do, and why?
- What would you do differently if you ran that again?
How do you handle maintenance and troubleshooting for shipboard machin…
How do you handle maintenance and troubleshooting for shipboard machinery?
Approach
- Name the disagreement and how you resolved it with evidence.
- Give the blast radius: what could have broken, and what you measured.
- Pick a story where you made the decision, not one where you watched it.
Follow-up
- What did you decide not to do, and why?
- How did you know your change caused the improvement?
- 01
Describe a time you had to make a difficult decision regarding vessel safety.
- 02
How do you manage professional relationships with senior officers and superintendents?
- 03
Can you walk us through your relevant experience and specific projects you have managed?
- 04
How do you handle maintenance and troubleshooting for shipboard machinery?
Is this an official Seaspan Corporation interview guide?
No. It is PracHub's own research and practice material for the Software Engineer role at Seaspan Corporation. Rounds and questions reflect what candidates have reported, not a process Seaspan Corporation has published, and they change over time. Confirm the current format and scope with your recruiter.
PracHub interview research ↗How difficult are the technical interviews?
The technical interviews are designed to be thorough but fair. If you have a solid background in shipboard systems and stay updated on safety regulations, you will find the questions focused and professional.
PracHub interview research ↗What is the typical timeline from the initial screen to an offer?
The timeline can vary, but because the process includes medical and psychometric testing, you should expect a few weeks from the initial interview to a final decision.
PracHub interview research ↗What differentiates successful candidates?
Successful candidates demonstrate a balance of technical competence, a proactive approach to safety, and the professional discipline required for long-term maritime operations.
PracHub interview research ↗Is there a specific focus on safety?
Yes, safety and environmental compliance are cornerstones of Seaspan Corporation and will be a major theme throughout your interviews.
PracHub interview research ↗Sources & methodology 3 sources ↗
No official company page is cited. Rounds and questions come from candidate reports and PracHub editorial material; each source shows the date it was read.
- 01PracHub interview research ↗
PracHub editorial research into this company and role, maintained with this guide. Candidate-reported, not an employer publication.
PracHub page · Accessed 2026-09-22 - 02PracHub Software Engineer practice ↗
Cross-company practice questions for this role.
PracHub page · Accessed 2026-09-22 - 03PracHub interview preparation framework ↗
The framework the preparation plan follows.
PracHub page · Accessed 2026-09-22
Explore related engineering environments and compare the preparation focus.
SIG (Susquehanna) Software Engineer Interview Questions & Guide 2026
Database practice for SIG (Susquehanna) candidates: how an index changes a query plan, and which anomalies survive a given isolation level, since read committed still permits non-repeatable reads.
AbsenceSoft Software Engineer Interview Questions & Guide 2026
What AbsenceSoft asks Software Engineer candidates, from reported rounds and questions.
Ziphq Software Engineer Interview Guide
Data structures and algorithms practice for Ziphq candidates, where stating a bound means stating its precondition: constant-time hash lookup is an average case over keys that spread.
Airwallex Software Engineer Interview Guide
Failure-handling practice for Airwallex software engineer candidates: requests whose outcome a timeout leaves unknown, where a retry is safe, and deduplicating at the receiver instead of assuming exactly-once delivery.