As a Data Scientist at Servier, you occupy a pivotal role at the intersection of healthcare innovation and advanced analytics. Servier is an international pharmaceutical company governed by a non-profit foundation, which means your work is directly tied to long-term therapeutic progress rather than short-term shareholder returns. You will be responsible for transforming complex biological, clinical, and operational data into actionable insights that accelerate the discovery and development of life-changing medicines.
Your impact spans the entire value chain, from optimizing drug discovery in the lab to enhancing patient outcomes through real-world evidence. You will work on high-stakes projects, such as predicting molecule behavior, analyzing clinical trial results, or developing digital health solutions. At Servier, data science is not just a support function; it is a strategic driver used to navigate the complexities of oncology, neuroscience, and immuno-inflammation.
The environment is intellectually rigorous and demands a balance of deep technical expertise and a passion for health. You will join a multidisciplinary ecosystem where you collaborate with biologists, clinicians, and engineers. This role offers the unique challenge of applying cutting-edge machine learning and statistical modeling to some of the most complex datasets in existence, all with the ultimate goal of improving the lives of patients worldwide.
Technical Screening
reportedMuch of what gets scored here happens out loud while you type. Nobody can see your reasoning inside a half-written query, so five silent minutes read as being stuck even when they are not. State the plan in plain language first: which tables, what grain you are aggregating to, and the one filter that defines the population. Then write it. The narration doubles as insurance, because a wrong plan gets caught early and cheaply while a wrong query gets caught at the end with no time left to redo it. A timed statistics section, where one exists, is a separate test with its own clock.
What to demonstrate
- Whether the query you write matches the plan you just described
- What you do with a hint, meaning whether the correction gets absorbed or the first approach gets defended
- Whether you can debug your own wrong output by reading the result set and naming which part of the query produced the anomaly
How to prepare
- Solve three problems while screen-sharing into a recording, then watch it back and mark every stretch longer than thirty seconds where you said nothing
- Practise compressing the plan into one sentence before typing, then check afterwards whether the finished query actually matched it
- Time yourself on statistics questions that carry a business reading, such as what a confidence interval does and does not claim, rather than re-reading notes without a clock
Take-Home Assignment
reportedBefore any modelling, the dataset is itself the first test. Take-home data usually carries something broken: rows duplicated at an unexpected grain, a join that silently drops part of the population, timestamps stored in more than one timezone, or missingness correlated with the outcome. An hour spent profiling row counts, key uniqueness and date ranges is not overhead, because it decides whether every number after it is real. What separates submissions is whether you report the defects you found and adapt the analysis to them, rather than modelling over them quietly and hoping the aggregate absorbs it.
What to demonstrate
- Whether you established the grain of each table and checked row counts after every join, and said so in the writeup
- Whether data defects you found are surfaced with their effect on the conclusion, instead of being dropped without comment
- Whether filters and exclusions are reproducible from the submitted code, with the size of the excluded population quantified
How to prepare
- Write a short profiling script you can point at any unfamiliar table: row count, distinct key count, null rate per column, and the min and max of every date field, then run it before anything else
- Write the funnel or the join chain as one query and check the row count at each grain, so a silent fan-out shows up as a number rather than as a wrong answer later
- On a past dataset, list every exclusion you applied and how many rows each one removed, then draft the single sentence about it you would put in a report
Technical Interview
reportedThis round decides whether someone can hand you a schema and a question and trust the number that comes back. Correctness under a clock is the bar, not clever syntax. The habit that separates strong from weak answers is checking the grain: after every join, know how many rows you expect and whether the count moved. Most wrong answers in this format are not wrong logic, they are a fan-out from a key that turned out not to be unique, or a filter applied before an aggregate when it belonged after. Say what you expect before you run it.
What to demonstrate
- Whether your row counts survive each join, and whether you notice on your own when they do not
- Deliberate handling of rows that fail to match, including whether the question needs an inner join or a left join with the non-matches kept and counted
- Whether NULLs are treated on purpose, given that a NULL compares equal to nothing and that COUNT of a column skips it
- Reaching a defensible answer inside the window instead of a refined one after it
How to prepare
- Take a two-table schema, write a join that fans out on purpose, then fix it by collapsing the many-side to one row per key before joining. Repeat until the fix is reflex rather than recall.
- Write a funnel as one query and print the distinct user count at each stage, then confirm each stage is a subset of the one above it rather than assuming it
- Do a few timed runs in a plain text box with no autocomplete and no formatter, since assessment editors often have neither
Project Presentation
reportedAn added round often puts you in front of someone outside the core hiring team: a partner engineer, a product owner, a domain expert, sometimes a more senior manager. The question they are really asking is not whether you can do the work but whether they would trust a number that came from you. That changes what a good answer looks like. Lead with what the decision cost and what it changed, keep the method available but not central, and be plain about the limits of your evidence. Overstating a result is the fastest way to lose this round.
What to demonstrate
- Whether you can explain a technical choice to someone who will never read your code, without either flattening it into nothing or hiding inside jargon
- Honesty about evidence strength: what the analysis establishes, what it only suggests, and what it cannot say at all
- How you take disagreement, specifically whether you update on a good objection, hold your position with reasons, or fold on contact
How to prepare
- Write the two-sentence version of your most technical project for a non-specialist, then check that neither sentence needs a method name to make sense.
- For one result you are proud of, write the strongest objection someone could raise and a response that concedes the part of it that is correct.
- Prepare one decision that turned out to be wrong: how you found out, what it cost, and what you changed afterwards. A senior cross-functional interviewer asks for this more often than a technical one does.
Behavioral Interview
reportedMost of the weight in this round sits on the disagreement questions. Data work routinely produces an answer someone senior did not want, and the interviewer is trying to learn what you do in that hour. Both failure modes are common: folding as soon as a director pushes back, and treating the pushback as ignorance to be corrected with a better chart. A strong answer usually contains a specific thing the other person knew that you did not, and describes how you found out whether it changed the conclusion.
What to demonstrate
- Whether you can state the other side's argument accurately before you explain why you disagreed
- What you treated as evidence during the disagreement, such as a rerun under their assumption or a holdout check, rather than persuasion technique
- Whether you distinguish being overruled from being wrong, and can give an example of each
How to prepare
- Write out one disagreement where you turned out to be wrong, and say what in the data misled you. Candidates prepare the story where they were right, and the follow-up asks for the other one.
- For your main disagreement story, be ready to say what result would have made you drop your position. If no such result exists, you were not arguing from the data.
- Practise stating the opposing position out loud in one sentence the stakeholder would accept, then continue the story.
Reference Check
reportedRounds outside the standard loop often open with something deliberately under-specified: a loose business problem, an open question about a product area, a dataset described in one sentence. The common failure is surveying, listing six plausible approaches and committing to none of them. The thing that separates a strong answer is scoping out loud. State what you are treating as the goal, name the metric you would move, say what you are choosing not to do and why, then take one path through to an actual answer. An interviewer can follow you down a narrow path. Nobody can grade a menu.
What to demonstrate
- Whether you turn an ambiguous prompt into a stated question with a measurable outcome before doing any work
- The judgement visible in what you cut, and whether you say why you cut it rather than silently dropping it
- Whether you land on a concrete recommendation with its caveat attached, rather than an unranked set of options
How to prepare
- Take three vague prompts, such as 'is this feature working', 'why did retention drop', and 'should we expand into a new segment'. For each, write one sentence of goal, one primary metric with its window, and two things you are explicitly not doing.
- Practise giving the recommendation first and the reasoning second, in five minutes. Loosely defined rounds are usually time-boxed, and an answer that arrives last often does not arrive.
- Keep a running assumption list as you talk, on paper or in the shared doc, so the interviewer can challenge one assumption instead of your whole answer.
PracHub editorial advice for the preparation topics above.
Pre-post evaluation on a high-cost or high-risk cohort
Cohorts selected on an extreme value of the outcome regress toward the mean on their own. Members identified as the top 1 percent of spend in one year spend far less the next, whether or not anyone intervenes, because the selecting year captured both chronic severity and one-off events. A pre-post design on such a cohort will report savings every time. A concurrent comparison group selected by the same rule in the same period, or a regression discontinuity at the selection threshold, is the minimum credible design.
Treating clinical measurements as missing at random
A lab result, a vital sign, or a screening exists because someone ordered it, and ordering tracks suspicion of disease, visit frequency, and site workflow. Imputing the mean or dropping incomplete rows biases the population estimate and can flip the sign of an association, because the untested are systematically healthier or systematically disengaged. The presence indicator is often more predictive than the value, which is a warning sign rather than a feature win: a model that learns test ordering will not transfer to a site with different protocols.
Comparing periods without accounting for seasonality or day-of-week
Compare whole weeks against whole weeks and check whether the same swing appeared in prior cycles or prior years before attributing it to anything you changed. Weekday and weekend populations often differ enough that a Tuesday-to-Saturday comparison is meaningless.
Accepting a metric definition without asking about the denominator
Pin down the denominator, the eligibility filter and the time window before computing anything: conversion rate per session, per user, per eligible user and per new user are four different numbers with different behaviour. Restate the definition in one sentence and get agreement before you analyse.
Choose a category, try a prompt, then open its approach, worked solution or follow-up when you need it.
Describe the difference between L1 and L2 regularization and when you …
Describe the difference between L1 and L2 regularization and when you would use each.
Approach
- Write down the assumption the method needs before you use the method.
- Translate the result into the decision it informs, in one plain sentence.
- Quantify uncertainty explicitly rather than reporting a point estimate alone.
Follow-up
- How would you explain this result to someone who does not know statistics?
- What sample size would you need to detect an effect half this size?
Explain the concept of Random Forest and how it differs from Gradient …
Explain the concept of Random Forest and how it differs from Gradient Boosting.
Approach
- Pick an evaluation metric that matches the cost of each error type, not a default.
- Set a baseline first, so any model has something honest to beat.
- Say how the offline result would be validated online before it is trusted.
Follow-up
- How would you choose the decision threshold, and who owns that choice?
- Where could label leakage enter this setup?
How do you handle the problem of multi-collinearity in a regression mo…
How do you handle the problem of multi-collinearity in a regression model?
Approach
- Set a baseline first, so any model has something honest to beat.
- Frame the prediction: the label, the moment of prediction, and the action it triggers.
- Say how the offline result would be validated online before it is trusted.
Follow-up
- What would you monitor after launch to know the model is still valid?
- Where could label leakage enter this setup?
Simulate how ignoring clustering inflates the false positive rate
Simulate a provider-level comparison with no true effect. 40 providers, 60 members each, a continuous outcome with total variance 1 and intraclass correlation 0.02. Randomise providers 20 to 20, not members. Over 5,000 replications, report the share of replications where a two-sample t-test run on all 2,400 individual observations, ignoring provider, returns p below 0.05. Report the same share when the unit of analysis is the 40 provider means. Then state how the first number follows from the design effect 1 + (m - 1) x ICC.
Approach
- Decompose the variance explicitly rather than tuning it: provider variance = ICC = 0.02, residual variance = 1 - ICC = 0.98. Draw u_j once per provider and e_ij per member, so the outcome is u_j + e_ij and the correlation between two members of one provider is 0.02 by construction.
- Randomise at the provider level. That is the entire mechanism: the treatment indicator is constant within a provider, so in any single replicate the provider intercepts are confounded with the arm, and the naive test reads that confounding as signal.
- Vectorise over replications with a (reps, providers, members) array. 5,000 x 2,400 normals is trivial in numpy, and a Python loop is what tempts people to cut replications to 500 and report a number with Monte Carlo noise of plus or minus 0.017.
- Predict the answer before running it: design effect = 1 + (60 - 1) x 0.02 = 2.18, naive standard errors are too small by sqrt(2.18) = 1.476, so the rejection rate at nominal 0.05 is about 2 x (1 - Phi(1.96 / 1.476)) = 0.18. Agreement between prediction and simulation is what makes the result a demonstration rather than an anecdote.
- Run the provider-mean analysis as the control. Recovering 0.05 there proves the generator is correct and isolates the failure to the analysis unit.
Worked solution 30 min
- Draw u with shape (reps, 40) from N(0, sqrt(0.02)) and e with shape (reps, 40, 60) from N(0, sqrt(0.98)); y = u[:, :, None] + e.
- Assign providers 0-19 to one arm and 20-39 to the other; because there is no true effect, a fixed split is valid and removes one source of Monte Carlo noise.
- Naive test: flatten each arm to 1,200 observations and compute a two-sample t statistic per replication with vectorised means and pooled variance.
- Cluster test: average within provider to 40 values, then run the same two-sample t on 20 versus 20.
- Report both rejection shares and compare the naive one against 2 x (1 - Phi(1.96 / sqrt(2.18))).
Follow-up
- How many providers would you need for 80 percent power on a 0.2 SD difference with 60 members each and this ICC?
- Cluster sizes are unequal in reality. The design effect approximation becomes 1 + ((1 + CV^2) x mbar - 1) x ICC. Which direction does that move your sample size and why?
- The intervention cannot be withheld from any provider. Sketch a design that still yields a defensible estimate.
Explain how you would structure a Python project to ensure it is repro…
Explain how you would structure a Python project to ensure it is reproducible by another scientist.
Approach
- Compute rates by summing numerator and denominator separately, never by averaging rates.
- Check whether any join is one-to-many before aggregating, or the sums inflate.
- Say which table is the grain you start from, and join outward from it.
Follow-up
- How does the query change if the join becomes one-to-many?
- How would you verify this result without re-running the same query?
What is the purpose of a virtual environment, and why is it important …
What is the purpose of a virtual environment, and why is it important in a data science workflow?
Approach
- Handle the rows that do not match: a LEFT JOIN with a NULL check is usually the question.
- State the window function and its partition and ordering out loud before writing it.
- Check whether any join is one-to-many before aggregating, or the sums inflate.
Follow-up
- How would you verify this result without re-running the same query?
- How does the query change if the join becomes one-to-many?
Write a function to clean a specific messy dataset (e.g., handling dat…
Write a function to clean a specific messy dataset (e.g., handling dates and nulls).
Approach
- Compute rates by summing numerator and denominator separately, never by averaging rates.
- Say which table is the grain you start from, and join outward from it.
- State the window function and its partition and ordering out loud before writing it.
Follow-up
- What breaks if events arrive late or out of order?
- How would you verify this result without re-running the same query?
Count thirty-day unplanned readmissions without counting transfers
encounter holds encounter_id, patient_id, facility_id, encounter_type, admit_ts, discharge_ts, admission_type, discharge_disposition, is_planned_admission and index_encounter_id. For inpatient stays discharged between 2025-01-01 and 2025-11-30, return the 30-day unplanned readmission rate overall and by facility_id. Exclude an index stay when is_planned_admission is TRUE or discharge_disposition is transfer_acute, expired, hospice or ama. A qualifying readmission is any unplanned inpatient admission for the same patient with admit_ts after the index discharge_ts and within 30 days of it. One stay can be both a readmission and the next index stay.
Approach
- Decide between LEAD and EXISTS explicitly and say why. LEAD over the patient's admission stream gives the literal next stay, so an intervening planned admission hides a later unplanned one. The measure asks whether any unplanned admission fell in the window, which is an EXISTS or a self-join with a range predicate.
- Exclude transfers at the index end before anything else. An acute-to-acute transfer closes one encounter and opens another at a different facility_id within hours, so without the transfer_acute exclusion the facilities that move the sickest patients out look the worst.
- Apply the index exclusions as a set, including stays with NULL discharge_ts, which are still open and have no measurable window.
- Stop the denominator early enough that every index stay had a full 30 days of observation plus encounter lag. That is why the window ends 2025-11-30 rather than at year end.
- Compute the rate at stay level, not patient level, then compare the raw facility rates against an observed-over-expected framing before anyone publishes a ranking.
Worked solution 30 min
- CTE ip: inpatient encounters with a non-null discharge_ts.
- CTE index_stays: ip rows with discharge_ts in the window, is_planned_admission FALSE, and discharge_disposition not in the four excluded values.
- Flag each index stay with EXISTS against ip for the same patient_id where is_planned_admission is FALSE, encounter_id differs, admit_ts > index.discharge_ts and admit_ts <= index.discharge_ts + 30 days.
- Aggregate numerator and denominator overall and grouped by facility_id.
- Re-run with the transfer exclusion removed and record how much the rate moves.
Follow-up
- A patient has three stays ten days apart. How many index stays and how many readmissions, and why does the answer depend on the stated rule?
- Which comparison would you publish across facilities, raw rate or observed over expected, and what does risk adjustment still fail to fix?
- index_encounter_id already exists on the table. Would you trust it, and how would you audit it against your own logic?
How do you optimize a Pandas operation that is running too slowly?
How do you optimize a Pandas operation that is running too slowly?
Approach
- State what result would change your recommendation, so the answer is falsifiable.
- Decompose the metric into the rates that drive it, and say which one you would check first.
- Name one primary metric, then the guardrail that stops it being gamed.
Follow-up
- What would you do if the primary metric and the guardrail moved in opposite directions?
- How would you detect that the metric is being gamed rather than genuinely improving?
Choose the primary metric for a high-risk care management program
A care-management team enrolls members in the top 1 percent of prospective_risk_score and wants one number it is judged on each quarter. The proposed metric is allowed PMPM for enrolled members, built from medical_claim_line.allowed_amount and pharmacy_claim.allowed_amount over member-months from member_enrollment. Propose the primary metric, two guardrails, and the reporting cadence. In three sentences, explain why the proposed metric will show large savings in year one even if the program has no effect, and what design change removes that.
Approach
- Name the failure before proposing anything. Members are selected on an extreme value of a noisy quantity, and the selecting year captured chronic severity plus one-off events that do not repeat. The cohort's spend falls the following year whether or not anyone intervenes, so a pre-post comparison on this cohort reports savings every time.
- Quantify it rather than asserting it: compute the selection-year and following-year allowed PMPM for last year's top-1-percent cohort and for the whole book. The cohort's decline is usually several times the population's, and that gap is the free saving any pre-post design will bank.
- Rebuild the metric as a difference, not a level. Primary: the difference-in-differences in risk-adjusted allowed PMPM between enrolled members and a concurrent comparison group selected by the identical rule in the same period, drawn from capacity overflow, wait-list, or members just below the selection threshold.
- Handle the exposure denominator honestly. Member-months come from coverage spans, partial months count fractionally, and death and disenrollment are not neutral: a member who dies stops accruing cost and member-months together, so state whether decedents stay in the analysis and for how long.
- Pick guardrails that catch the two bad ways cost falls: ambulatory care sensitive admissions per 1,000 member-years, and emergency department visits per 1,000 member-years, both risk-adjusted. A cost drop from care that was avoided rather than delivered shows up in one of those two within a quarter or two.
- Set the cadence to incurred quarters reported at a stated paid-through date, withholding or completion-factoring the three most recent incurred months, and say that the quarter is restated until runout completes.
Worked solution 30 min
- Compute the regression-to-the-mean baseline: last year's top-1-percent cohort allowed PMPM in the selection year and the following year, alongside the same two numbers for the whole population. Write both as a percent change.
- Define the comparison group by the identical selection rule and the identical period, and list the three ways it can still differ from the enrolled group.
- Write the primary metric as a difference-in-differences on risk-adjusted allowed PMPM, stating the risk-adjustment method and the period over which the risk score is measured.
- Specify the two guardrails with full numerator, denominator and window, in member-years not member counts.
- State the cadence, the paid-through date, the restatement policy, and the pre-registered decision rule for what counts as a result worth acting on.
Follow-up
- The comparison group is wait-listed members. What is the argument that they are not comparable, and what would you show to answer it?
- If the difference-in-differences estimate is negative but the parallel-trends check on the two pre-periods fails, what do you report?
- Enrollment into the program takes 45 days from identification. How does that interval create immortal time, and what do you do about it?
Avoidable admissions fell the quarter a programme launched
Ambulatory care sensitive admissions per 1,000 member-years fell 18 percent in the quarter a care-management programme launched, enrolling the top 2 percent of members by prior-year spend. You have encounter, member_enrollment including a product line added mid-quarter, and medical_claim_line. Emergency visits per 1,000 rose 9 percent over the same quarter and observation stays rose as well. Produce a decomposition that states how much of the 18 percent is attributable to the programme, and state the design you would need before claiming any of it.
Approach
- Rebuild the denominator from coverage spans as member-years, counting partial coverage fractionally, and recompute the rate with and without the product line that entered mid-quarter. A newly added, structurally healthier population inflates the denominator and deflates every rate built on it without a single admission being avoided.
- Freeze the numerator's code list to one version. The ambulatory care sensitive list is defined on ICD-10-CM principal diagnosis codes, and in the United States that code set is updated effective October 1, so a quarter spanning that boundary can gain or lose qualifying codes. Recompute both quarters against a single code set version.
- Decompose the remaining change with a Kitagawa split across product_type and prior-year risk decile: the mix term is the population getting younger or healthier, the within term is the only place a programme effect can live.
- Test reclassification directly. An inpatient stay recorded as an observation stay is not an avoided admission. Compute total acute contacts per 1,000 member-years as inpatient plus observation plus emergency, and check whether that total moved at all. If it is flat while inpatient falls, care was relabelled and deflected, not prevented.
- Compare to the same quarter of the prior year rather than the adjacent quarter. Several ambulatory care sensitive conditions, including heart failure decompensation and bacterial pneumonia, are strongly seasonal, so a quarter-over-quarter comparison confounds the programme with the calendar.
- Address selection last and explicitly. The enrolled cohort was chosen on an extreme of prior-year spend, so it regresses toward the mean with no intervention at all, because the selecting year captured both chronic severity and one-off events. A pre-post design on this cohort will report savings every time. The minimum credible design is a concurrent comparison group selected by the same rule in the same period, or a regression discontinuity at the 2 percent threshold, with a parallel-trends check on at least four pre-periods.
Follow-up
- The parallel-trends check fails on two of the four pre-periods. What do you do, without abandoning the question?
- Express the effect you can defend as an absolute risk difference and a number needed to treat, with the baseline rate stated. Why is that more useful here than a relative reduction?
- The programme cannot be withheld from anyone. Sketch a rollout design that still identifies an effect, and say what secular trend does to the estimate.
Four days spend equal time on query work, statistics, modelling and product judgement at deliberately shallow depth, which produces a scored map of where you actually stand. The last three days spend everything on the two areas the role weights most, and close by re-running day one to measure movement.
Prepare, practise & reflect
One practical outcome each day. Spend longer where you need it.
0 / 7 done01Breadth pass: query fluency
- Solve six prompts spanning aggregation, joins, window functions and date arithmetic in 60 minutes total, stopping at 10 minutes each whether or not it works, and mark every prompt as solved, solved slowly, or stuck.
- For each unsolved prompt write the single blocking sentence (I lost the grain, I did not know the frame clause, I could not express the date boundary) instead of reading the solution.
- Translate one pandas transformation you know well into SQL and one SQL query into pandas, checking that both return the same row count and the same totals.
Deliverable: A scored six-row table, one line per prompt, saved for the day-seven re-run.
Practice prompt ↗Practice prompt ↗Worked solution ↗02Breadth pass: statistics and inference
- Answer ten short questions in writing with nothing open: what a p-value is conditional on, what a 95 percent interval covers across repeated samples, when a paired test is the right one, what the bootstrap estimates, why multiple comparisons inflate false positives, how controlling the family-wise error rate differs from controlling the false discovery rate, what power depends on, what a missed real effect costs a product, the three situations where the central limit theorem does not rescue you (small n, very heavy tails, dependent observations), and what a standard error is the standard deviation of.
- Grade yourself against a reference and count only the answers that were exactly right, not the ones that were nearly right.
- Rewrite the two weakest answers the following morning from memory in full sentences.
Deliverable: Ten graded answers with an honest count of exact hits.
Practice prompt ↗Practice prompt ↗03Breadth pass: modelling
- Take one tabular dataset end to end in 90 minutes: a leakage-safe split, a baseline that is not a model (majority class or historical mean), one regularized linear model, one gradient-boosted tree, and a single evaluation metric chosen before you look at any result.
- Write why that metric fits the cost structure: precision at a fixed recall for alerting, calibration for anything feeding a price or a threshold, ranking metrics for retrieval, and note that area under the ROC curve is insensitive to class balance in a way that can flatter a rare-positive problem.
- Name the leak you were most likely to introduce (an encoding fit on all rows before splitting, or a feature computed after the label's timestamp) and write the check that would have caught it.
Deliverable: A notebook whose first cell states the metric and the baseline, plus two lines on what beat what and by how much.
Practice prompt ↗Practice prompt ↗04Breadth pass: product judgement
- Answer three case prompts aloud at 15 minutes each, timing how long passes before you state a success metric.
- For one case write the first segmentation you would run and the row counts you expect per segment, so that a tiny segment cannot quietly drive the conclusion.
- Take a metric definition you did not write, from a public dashboard, a textbook, or documentation you already have open, and list every place two analysts implementing it would diverge: which rows the denominator admits, whether the unit is an account or a person, what the time window is anchored to, and what happens to data that arrives late. Then write the one question that would close the largest of those gaps.
Deliverable: Three recorded case answers plus an ambiguity list for a metric someone else defined, ending in the single question you would ask about it.
Practice prompt ↗Practice prompt ↗Worked solution ↗05Depth, first area
- Rank the four areas by how many bullet points in the role description each one covers, pick the top one, and spend the entire day inside it.
- Work the six hardest problems you can find in that area and for each write the generalizable move you should have reached for first, rather than the answer.
- Re-solve the two you failed the same evening with notes closed.
Deliverable: Six generalizable moves written as instructions to yourself, not as solutions.
Practice prompt ↗Practice prompt ↗06Depth, second area, and the seam between them
- Repeat the depth protocol on the second-ranked area with the same six-problem structure.
- Construct one problem that requires both areas at once, for example a metric redefinition whose effect you must validate with a test whose readout you then have to query.
- Solve your own combined problem end to end and note where the handoff between the two areas cost you time.
Deliverable: One combined problem, solved end to end, with the handoff failure written down.
Practice prompt ↗Practice prompt ↗07Integration and re-measurement
- Re-run the six prompts from day one under the same clock and compare both correctness and time.
- Run a 60-minute mixed mock that moves between areas without warning, since switching cost is what breadth passes do not train.
- Write the two areas you would still fail on, and the sentence you will use in the interview when you hit one of them.
Deliverable: A before-and-after score table plus a written plan for the two remaining gaps.
Practice prompt ↗Practice prompt ↗Worked solution ↗Expand any day for tasks and deliverables. Your progress is saved on this device.
Half of this section is about translation. Be ready to describe how you explained a result to someone who did not want the method, only the implication, and what you did when the simplified version started being repeated in a way that overstated it. Correcting your own simplification is a strong beat.
Describe a time you disagreed with a teammate on a technical approach.…
Describe a time you disagreed with a teammate on a technical approach. How did you resolve it?
Approach
- Close with what you would do differently, concretely.
- Quantify the outcome, including what you would not claim credit for.
- Name the disagreement or constraint, and how you resolved it with evidence.
Follow-up
- How did you know the outcome was caused by your change?
- What would you do differently if you ran that project again?
Own an analysis that shipped wrong and was acted on
Describe an analysis you delivered that was wrong, where someone acted on it before the error surfaced. Pick something with a mechanism you can name, not a typo. Cover what the number claimed, what was actually true, how much time passed before it was caught, who caught it, and what you told the people who had already acted. Deliverable: a five-minute account that ends with the specific control you added afterwards, plus one occasion since when that control has fired.
Approach
- Read the probe: the interviewer is testing whether you detect your own errors and whether the correction was structural. Pick an error with a nameable mechanism (a denominator built from distinct members instead of member-months, a series read before claims runout completed, a cohort selected on the outcome) so the story has a diagnosis rather than a mood.
- Open with the decision that was made on your number, not with the bug. The severity of an analytic error is measured in the action it caused: a rate filing, a staffing plan, a programme expansion.
- State the counterfactual number. 'The true figure was 14.1 admissions per 1,000 member-years, not 9.8' is a fact; 'it was off by a lot' is not.
- Describe the detection path honestly, including whether you found it or somebody else did. Say how long it took, because time to detection is the part you actually control next time.
- Close on the control, and make it something that protects a reader who has never met you: a unit test on the denominator, a paid-through date stamped on every chart, a required exclusions block in the spec template. Name one later date it caught something.
Follow-up
- What would have had to be true for you to catch this before delivery rather than after?
- Did the stakeholder change how much they trust your work, and did you want them to?
- Give an example of a control you added that turned out to be the wrong control.
Push back on an over-broad extract without blocking the work
A researcher asks for a one-off extract covering 12,000 members: member_id, date of birth, five-digit residential postal code, full lab_result rows including value_text, and clinical note text, held on their laptop for a retrospective analysis of one lab analyte over time. They describe it as de-identified because names are excluded. A flat refusal is not an acceptable answer. Deliverable: the column list you will actually provide with a justification per retained field, the sentence explaining why free text defeats an enumerated-identifier approach, your small-cell rule for the published stratification, and what you deliver this week.
Approach
- The probe is whether privacy is a design skill for you or a compliance reflex. Flat refusal and unquestioned fulfilment both fail, for opposite reasons.
- Reconstruct the analysis from the research question rather than from the request. A longitudinal trend in one analyte needs a stable pseudonymous subject key, the analyte's loinc_code, value_numeric, units, the reference bounds, and a date. It does not need names, notes, or a precise birth date.
- Replace each identifier with the least precise version that still answers the question: a salted per-study pseudonym instead of member_id, age in years or an age band instead of date of birth, a consistent per-subject date offset if only intervals matter, and a coarser geography than five-digit postal code.
- Explain the free-text problem in one sentence. Removing an enumerated list of identifier fields does not de-identify a note, because notes carry names, relationships, employers, dates and rare clinical detail in prose, so only a reviewed extraction into structured fields or a formal statistical determination addresses it.
- Set the publication rule before the analysis runs. Suppress cells below a stated threshold and suppress complements too, because a reader holding a row total and all but one cell recovers the suppressed count by subtraction.
- Keep them moving. Deliver the reduced extract into a controlled environment this week rather than onto a laptop, and offer to derive any note-based variable yourself as a structured flag so they never need the prose.
Follow-up
- They say the age band loses resolution their model needs. What do you do?
- How do you set the suppression threshold, and who signs off on it?
- The analysis later needs linking to a second data source. What changes?
- 01
Describe a time you disagreed with a teammate on a technical approach. How did you resolve it?
- 02
Describe an analysis you delivered that was wrong, where someone acted on it before the error surfaced. Pick something with a mechanism you can name, not a typo. Cover what the number claimed, what was actually true, how much time passed before it was caught, who caught it, and what you told the people who had already acted. Deliverable: a five-minute account that ends with the specific control you added afterwards, plus one occasion since when that control has fired.
- 03
A researcher asks for a one-off extract covering 12,000 members: member_id, date of birth, five-digit residential postal code, full lab_result rows including value_text, and clinical note text, held on their laptop for a retrospective analysis of one lab analyte over time. They describe it as de-identified because names are excluded. A flat refusal is not an acceptable answer. Deliverable: the column list you will actually provide with a justification per retained field, the sentence explaining why free text defeats an enumerated-identifier approach, your small-cell rule for the published stratification, and what you deliver this week.
Is this an official Servier interview guide?
No. It is PracHub's own research and practice material for the Data Scientist role at Servier. Rounds and questions reflect what candidates have reported, not a process Servier has published, and they change over time. Confirm the current format and scope with your recruiter.
PracHub interview research ↗How difficult are the technical interviews at Servier?
They are generally rated as average to difficult. The difficulty often stems from the depth of statistical knowledge required and the rigor of the take-home assignment, which can take 1-2 days to complete thoroughly.
PracHub interview research ↗What is the remote work policy for Data Scientists?
Historically, Servier has maintained a more traditional office presence, often offering around 1 day of teleworking per week. However, this can vary by team and specific location, so it is best to clarify this during the HR round.
PracHub interview research ↗How long does the entire process take?
The process typically moves at a moderate pace, often taking 4 to 6 weeks from the initial screen to a final offer. Delays can occur during the reference check or take-home grading phases.
PracHub interview research ↗What makes a candidate stand out at Servier?
Candidates who demonstrate a genuine interest in the medical impact of their work, combined with a "software engineering" mindset toward their data science code, tend to perform best.
PracHub interview research ↗Sources & methodology 3 sources ↗
No official company page is cited. Rounds and questions come from candidate reports and PracHub editorial material; each source shows the date it was read.
- 01PracHub interview research ↗
PracHub editorial research into this company and role, maintained with this guide. Candidate-reported, not an employer publication.
PracHub page · Accessed 2026-09-22 - 02PracHub Data Scientist practice ↗
Cross-company practice questions for this role.
PracHub page · Accessed 2026-09-22 - 03PracHub interview preparation framework ↗
The framework the preparation plan follows.
PracHub page · Accessed 2026-09-22
Explore related engineering environments and compare the preparation focus.
Veracyte Data Scientist Interview Questions & Guide 2026
Causal-inference exercises for Veracyte data scientist prep: difference-in-differences, matching, instrumental variables, and knowing when observational data simply cannot answer the question asked.
Zoetis Data Scientist Interview Questions & Guide 2026
Metric-diagnosis practice for Zoetis data scientist candidates: a number moves week over week and you work out why, splitting by segment, ruling out a logging or release change, and separating a mix shift from a real change in user behaviou
Vizient Data Scientist Interview Questions & Guide 2026
Communication practice for Vizient data scientist candidates: turn an analysis into a recommendation, name the uncertainty honestly, and answer the follow-up a skeptical stakeholder will raise.
Vibrant Emotional Health Data Scientist Interview Questions & Guide 2026
Case practice for the Vibrant Emotional Health data scientist interview, where the prompt is deliberately underspecified and your first move is scoping it into something measurable.