This guide covers what a Machine Learning Engineer at Shell is expected to do and how to prepare for the interview.
Automated Assessments
reportedWhat this round decides is narrow: whether you can produce code that runs and is correct on inputs nobody showed you. An elegant solution that does not compile scores below a plain one that does, so write a correct brute force first, say out loud that you know its cost, and improve it with the working version still on screen. What separates strong answers is who finds the broken case. Trace your own code against an empty input, a single element, and duplicate keys before you say you are finished, because being told is far more expensive than noticing.
What to demonstrate
- Whether degenerate inputs get checked without being asked for: an empty collection, one element, every element equal, and the extreme value the input type allows
- Whether the complexity you state matches the code you actually wrote, including a sort or a copy sitting inside a loop
- Whether the finished answer is verified against the worked examples before you call it done, rather than assumed correct because the code reads correctly
How to prepare
- Take five problems you have already solved and, without running anything, write down what each returns for empty input, a single element, and all-duplicates. Then run them and count how many you predicted wrong.
- Drill the brute force as its own skill: on ten problems, write only the obviously-correct slow version and time how long it takes to get it passing. If that is more than a few minutes, that is what to practise, not the optimal version.
- Add a fixed last step before you submit anything, reading only the loop bounds and the initial value of each accumulator, which is where most off-by-one errors live
Technical Screens
reportedWhat this round decides is narrow: whether you can produce code that runs and is correct on inputs nobody showed you. An elegant solution that does not compile scores below a plain one that does, so write a correct brute force first, say out loud that you know its cost, and improve it with the working version still on screen. What separates strong answers is who finds the broken case. Trace your own code against an empty input, a single element, and duplicate keys before you say you are finished, because being told is far more expensive than noticing.
What to demonstrate
- Whether degenerate inputs get checked without being asked for: an empty collection, one element, every element equal, and the extreme value the input type allows
- Whether the complexity you state matches the code you actually wrote, including a sort or a copy sitting inside a loop
- Whether the finished answer is verified against the worked examples before you call it done, rather than assumed correct because the code reads correctly
How to prepare
- Take five problems you have already solved and, without running anything, write down what each returns for empty input, a single element, and all-duplicates. Then run them and count how many you predicted wrong.
- Drill the brute force as its own skill: on ten problems, write only the obviously-correct slow version and time how long it takes to get it passing. If that is more than a few minutes, that is what to practise, not the optimal version.
- Add a fixed last step before you submit anything, reading only the loop bounds and the initial value of each accumulator, which is where most off-by-one errors live
Multi-Round Interviews
reportedWhen a round has no standard shape, it is often there because something is still open: an area no earlier conversation reached, a round where the signal came out mixed, or a decision someone is not ready to make alone. Work out which by going back over what each earlier round actually covered rather than how it felt, and arrive able to give evidence on that point without being asked twice. Weak answers replay the loop's earlier material at the same depth. Strong ones go a level deeper and stay consistent with what you already said.
What to demonstrate
- Whether your account of a project matches the one you gave earlier in the loop, since what you said before may be available to whoever runs this round
- Whether you can go a level deeper on something already covered, reaching the decision and its alternatives rather than repeating the summary
- Whether you state your own uncertainty accurately, including parts of a system you did not build and decisions you inherited, instead of claiming even ownership across all of it
- Whether you can answer a question you handled poorly earlier by naming what you missed, rather than delivering a polished second version as if the first had not happened
How to prepare
- Reconstruct the loop on one page: for each round, the questions you were asked and the answer you actually gave, not the better one you thought of afterwards. The gaps on that page are your best available guess at why this round exists.
- Take the two claims you made earlier that carry the most weight and assemble the backing for each: the measurement, the date, what broke, the decision you would make differently now.
- Write down the three facts about your work that must not drift between tellings, such as team size, timeline and your own role, and check your stories against that list rather than trusting recall under pressure
PracHub editorial advice for the preparation topics above.
Paginating with LIMIT/OFFSET over a set that changes while the client is reading it
OFFSET n makes the database produce and discard n rows before returning anything, so the cost of a page grows with its depth rather than with its size and page 500 costs five hundred pages of work. The correctness problem is worse than the cost: if a row is inserted or reordered between two page fetches, rows shift across the offset boundary and are either skipped entirely or returned twice, and neither outcome leaves any trace in the response for the client to detect. Keyset pagination - WHERE (sort_key, id) < ($last_sort_key, $last_id) ORDER BY sort_key DESC, id DESC LIMIT n, backed by an index in exactly that order - reads only the rows it returns and is stable against concurrent inserts. It requires the tie-break column: a timestamp is not unique, and duplicate sort keys straddling a page boundary reintroduce the skip it was adopted to remove.
Shipping a migration and the code that depends on it as a single change
During any rolling deploy, and for as long as a rollback remains possible, old and new code execute against the same schema at the same time. A migration that drops or renames a column breaks every instance that has not restarted yet, and code that requires a column the migration has not applied breaks every instance that restarted early. The discipline is expand then contract: add the new column nullable, write both shapes, backfill in batches, move reads across once the backfill is verified, and only then stop writing the old shape and drop it - four deploys, usually spread over days. It feels disproportionate until the first rollback, at which point it is the only reason the previous version still runs.
Answering a debugging question with a guess instead of a bisection
Give a procedure that halves the search space at each step: confirm the symptom reproduces, establish the last known-good version, input or timestamp, then bisect over commits, over the data, or over the layers of the request path. A plausible cause with no way to confirm it is the same move whether it happens to be right or wrong, which is why it scores nothing.
Saying 'eventually consistent' without naming the anomaly a user would see
Describe the concrete symptom you are choosing to accept: the author reloads and their own comment is missing for two seconds, or two devices show different balances for a minute. The class of consistency model is a technical label; the tolerable anomaly is the actual product decision.
Choose a category, try a prompt, then open its approach, worked solution or follow-up when you need it.
Walk me through the end-to-end lifecycle of a model deployment at your…
Walk me through the end-to-end lifecycle of a model deployment at your previous company.
Approach
- Name the simplest model that could work and what would make you move past it.
- Say how you would validate it, and where leakage could enter the split.
- Pick the metric from the cost of each error type, not from habit.
Follow-up
- How would you know the model is overfitting?
- Where could label leakage enter this setup?
Discuss the limitations of your favorite machine learning model in a p…
Discuss the limitations of your favorite machine learning model in a production environment.
Approach
- Name the simplest model that could work and what would make you move past it.
- Say how you would validate it, and where leakage could enter the split.
- Pick the metric from the cost of each error type, not from habit.
Follow-up
- What changes if the classes are heavily imbalanced?
- How would you know the model is overfitting?
Explain the trade-offs between different gradient boosting frameworks.
Explain the trade-offs between different gradient boosting frameworks.
Approach
- Pick the metric from the cost of each error type, not from habit.
- State the learning problem: the label, the unit of prediction and how the model is used.
- Name the simplest model that could work and what would make you move past it.
Follow-up
- What changes if the classes are heavily imbalanced?
- Where could label leakage enter this setup?
How do you measure the business impact of an ML model versus its techn…
How do you measure the business impact of an ML model versus its technical accuracy?
Approach
- Pick the metric from the cost of each error type, not from habit.
- Name the simplest model that could work and what would make you move past it.
- Say how you would validate it, and where leakage could enter the split.
Follow-up
- Where could label leakage enter this setup?
- How would you know the model is overfitting?
Given a set of operational constraints, how would you optimize the eff…
Given a set of operational constraints, how would you optimize the efficiency of a supply chain process?
Approach
- Walk one small example through your approach before writing the whole thing.
- Name the brute-force solution and its complexity before improving on it.
- Restate the input: its shape, its size, and what is guaranteed about it.
Follow-up
- Which test case would catch an off-by-one here?
- What is the worst case, and how likely is it on real data?
During a code review, what specific criteria do you use to evaluate th…
During a code review, what specific criteria do you use to evaluate the quality of a peer's implementation?
Approach
- Name the brute-force solution and its complexity before improving on it.
- State the target complexity and say which constraint rules the naive version out.
- Restate the input: its shape, its size, and what is guaranteed about it.
Follow-up
- Which test case would catch an off-by-one here?
- How does this change if the input no longer fits in memory?
Collapse a redelivered event batch into per-aggregate high-water marks
You drain a batch of up to 5,000,000 events, each (aggregate_id BIGINT, aggregate_version INT, event_type, payload). The log guarantees order within one aggregate only; the batch merges 64 partitions, and a relay failover has redelivered a range, so an older version for an aggregate can appear after a newer one. Given a map of last_applied_version per aggregate, produce the events worth applying, at most one per (aggregate_id, version), plus the count discarded. Target O(n) time. State the memory for 2,000,000 distinct aggregates and what you do when it does not fit.
Approach
- One pass, one hash map from aggregate_id to the highest version kept, and a discard counter. An event whose version is at or below last_applied_version for its aggregate is dropped without further work, which is the whole reason the event carries its version rather than a delta. O(n) expected time, O(d) space in distinct aggregates.
- Keep the maximum, never the last occurrence. The redelivered range means the final appearance of an aggregate in the batch can be an older version than one seen earlier in the same batch, so last-wins applies stale state over newer state and the projection regresses with no error anywhere.
- Cost the memory instead of calling it large: an 8-byte key plus a 4-byte version is 12 bytes of payload, and an open-addressed table held at a 0.7 load factor costs roughly 17 bytes per entry before per-slot metadata, so 2,000,000 aggregates is tens of megabytes in a native layout and several times that in a runtime that boxes both key and value.
- If the distinct set exceeds memory, partition on hash(aggregate_id) mod P and reduce each partition independently. Every event for one aggregate hashes to the same partition, so the per-partition result is exact and the merge is concatenation rather than a second reduction.
- Reject sorting the batch by (aggregate_id, version) as the default. It is O(n log n) and buys nothing, because max is associative and commutative and needs no ordering; sorting earns its cost only when the downstream consumer must receive the events in order rather than a per-aggregate winner.
- Separate the two mechanisms out loud: in-batch deduplication does not make the consumer idempotent, because the same event redelivered tomorrow arrives in a different batch entirely. The projection write itself still has to be keyed on (aggregate_id, version).
Worked solution 20 min
- Write the pass: look up last_applied_version, skip if the event's version is not greater, otherwise upsert into the keep-map only when the incoming version exceeds the version already held, incrementing the discard counter on every skip.
- Hand-trace one aggregate whose events arrive as v5, v3, v4, v5 with last_applied_version = 2, and confirm the output holds v5 once while the counter reads 3.
- Compute the table footprint for 2,000,000 entries at 12 bytes of payload and a 0.7 load factor, then state the multiplier for a runtime that boxes keys and values.
- Add the hash-partitioning fallback and say in one sentence why the per-partition results need no cross-partition merge logic.
Follow-up
- The payload is a patch rather than a snapshot, so applying only the highest version loses the intermediate changes. What changes in your reduction?
- How do you detect that version 7 arrived while version 6 was never delivered, and what should the consumer do about the gap?
- Two events for one aggregate carry the same version with different payloads. Which one is wrong, and how would you find out?
Denormalise tenant onto revisions and backfill it live
resource_revision (revision_id, resource_id, version, actor_user_id, change_kind, patch, request_id, created_at) has 400M rows and no tenant column; tenant_id lives only on resource. Two reads need it: a tenant-scoped audit feed ordered by created_at DESC, and an offboarding purge. Both join back to resource today. Justify adding tenant_id to resource_revision against those two reads, name the anomaly the copy introduces and the constraint that prevents it, then give the ordered migration for a live table taking 1.2k writes/second — the lock each step takes, how the backfill is batched, and where each step stops being reversible. PostgreSQL 16.
Approach
- Justify from the access path rather than from taste. Without the column, the audit feed either scans resource_revision by created_at and discards other tenants' rows, or resolves the tenant's resource_ids first and probes with them — both proportional to the tenant's whole history rather than to one page. With (tenant_id, created_at DESC, revision_id DESC) it is a seek that stops at 50 rows, and the purge becomes a ranged delete instead of a join.
- Name the cost exactly: a second copy of a fact can disagree with the first. Make the disagreement unwritable rather than documented — add UNIQUE (resource_id, tenant_id) on resource so it can serve as a foreign-key target, then FOREIGN KEY (resource_id, tenant_id) REFERENCES resource (resource_id, tenant_id) on the revision table. A revision can then only ever carry its parent's tenant.
- Step one, expand: ALTER TABLE resource_revision ADD COLUMN tenant_id BIGINT NULL, with no default, so it is a catalogue change and no rewrite. It still needs ACCESS EXCLUSIVE for an instant, and that instant queues behind the longest open transaction on the table while every later query queues behind it — set lock_timeout to 2s and retry rather than wait.
- Step two, dual-write: deploy the writer that populates tenant_id on every new revision while reads still use the join. Reversible by redeploying the previous build, because nothing reads the column yet.
- Step three, backfill: batch by primary key rather than by created_at so the cursor is dense and resumable — UPDATE resource_revision rr SET tenant_id = r.tenant_id FROM resource r WHERE r.resource_id = rr.resource_id AND rr.revision_id > $1 AND rr.revision_id <= $1 + 5000 AND rr.tenant_id IS NULL — committing per batch and persisting the cursor. Throttle on replica replay lag and on dead-tuple count, since each batch writes 5,000 new row versions. Run the backfill before the index exists so those updates can stay HOT.
- Step four, index then enforce then contract: CREATE INDEX CONCURRENTLY (cannot run inside a transaction block, scans the table twice, waits on open transactions, and leaves an INVALID index to drop concurrently if it fails); ADD CONSTRAINT ... CHECK (tenant_id IS NOT NULL) NOT VALID, then VALIDATE CONSTRAINT, which takes only SHARE UPDATE EXCLUSIVE, after which SET NOT NULL uses the validated check instead of re-scanning on PostgreSQL 12 and later. Only then move the audit reads onto the column and, in a later deploy, delete the join path.
Worked solution 40 min
- Write the five steps as separate scripts and state, for each, the lock mode it acquires and the deploy it pairs with.
- On a 20M-row copy, run the ADD COLUMN while a 30-second transaction holds a lock on the table, and record how long unrelated queries queue behind it.
- Run the batched backfill at 5,000 rows, kill it mid-run, restart from the persisted cursor, and confirm no row is processed twice and none is skipped.
- Build the index concurrently under concurrent write load, then add the CHECK ... NOT VALID, VALIDATE it and SET NOT NULL, timing each.
- Compare the audit-feed plan before and after: join-and-filter versus an index seek with no Sort.
Follow-up
- The backfill is half finished and a rollback is required. What state is the table in, and what does the previous build do with a half-populated column?
- How do you verify the backfill actually finished, given rows are still being inserted while it runs?
- A resource must now be movable between tenants. What does that do to the composite foreign key and to the revisions already written?
Hold a per-tenant active cap against concurrent creates
A tenant on the standard plan may hold at most 50 resources with status='active'. The create handler runs SELECT count(*) FROM resource WHERE tenant_id = $1 AND status = 'active', compares to 50, then inserts. Two creates arrive 3 ms apart on different instances and the tenant lands at 51. Name the anomaly, say whether PostgreSQL 16 READ COMMITTED or REPEATABLE READ prevents it and why, then give an implementation that holds the cap at READ COMMITTED with the exact statements. Finally, say what changes when the cap is 'at most one running export per tenant' on job_run.
Approach
- Name it: write skew. The two transactions read an overlapping set and write disjoint rows, so there is no row-level conflict for the engine to detect and each commit is individually legal.
- Rule out the levels precisely. READ COMMITTED takes a fresh snapshot per statement and takes no lock on the counted rows, so both see 49. PostgreSQL's REPEATABLE READ is snapshot isolation: it removes non-repeatable reads and phantoms within the snapshot but still admits write skew, because the anomaly is not a re-read of a changed row, it is a read of a set that a concurrent transaction invalidates. Only SERIALIZABLE closes it, by tracking the read dependency and aborting one transaction with SQLSTATE 40001 — a guarantee that exists only if the application re-runs the whole transaction from the read.
- Convert the set predicate into a single-row conflict: keep tenant.active_resource_count and run UPDATE tenant SET active_resource_count = active_resource_count + 1 WHERE tenant_id = $1 AND active_resource_count < 50 in the same transaction as the INSERT. Zero affected rows is the cap, returned as 409. The row lock serialises the decision at any isolation level, and contention is bounded to one tenant's row — which is also the fair-scheduling unit, unlike a global counter that would convoy every tenant behind one row.
- State the cost you just took on: a counter is a second source of truth that can drift, so every path that changes status must adjust it inside the same transaction, and a periodic reconciliation has to exist, with resource_revision as the authority for what the count should have been.
- For the job case the invariant is expressible per row, so let the database hold it: a partial unique index on job_run (tenant_id, job_type) WHERE status IN ('queued','running') makes a second running export unwritable and the loser takes 23505, mapped to 409. That is strictly better than a counter — no drift, no reconciliation — and it is available only because the cap is one rather than fifty.
- Add the retry discipline each route demands: under SERIALIZABLE both 40001 and deadlock 40P01 are retryable and the retry must re-execute the read, while under READ COMMITTED with the counter nothing retries, because the conflict is reported to the caller rather than raised as an error.
Follow-up
- A resource moves from archived back to active. Which statements change, and what breaks if the counter update and the status change land in different transactions?
- The cap becomes plan-dependent and a plan can change mid-month. Where does the number 50 live, and who reads it?
- How do you detect after the fact that the counter drifted, without locking the table?
Rebuild the search projection while it serves nine thousand queries
The read-model service answers about 9k queries/second at a 120 ms p99 from a projection built off the event log, normally under 2 seconds behind. A mapping change forces a full rebuild from resource_revision, during which apply lag rises to minutes. Writes continue at 1.2k/second and events at 4k/second. Design the rebuild: how the new index is populated and cut over, how position is tracked per log partition, what the API returns alongside results so a client can tell a stale answer from a current one, and the criterion for cutting over.
Approach
- Build into a second index and swap an alias rather than mutating the live one. The rebuild is then reversible by pointing the alias back, so a bad mapping costs a wasted rebuild instead of an outage. The price is peak storage for two full copies and double apply load during catch-up, and both numbers should be stated up front rather than discovered when disk fills.
- Track position per log partition, not globally. Order is guaranteed only within an aggregate's partition, so progress is a vector, and the only number safe to publish is taken from the least advanced partition - the slowest one is what bounds completeness. Publishing the most advanced partition's position declares the projection current while another partition sits twenty minutes behind.
- Make apply idempotent so the backfill and the live tail can overlap without a freeze. Each document records the aggregate_version it reflects, and any event at or below that version is discarded. This is why the event carries the full fact and not a delta: a delta cannot be discarded safely, and a consumer that calls back to read current state applies a state newer than the event it is processing, which is how a projection ends up with changes applied out of order.
- Turn lag into a contract instead of a surprise. Return the watermark with every result set, and return the version produced by a write so the client can compare the two. A client that wrote version 7 and receives results at a watermark older than its own commit can show that its change is still landing, rather than rendering the previous value as current. Blocking the read until the projection catches up would convert a staleness problem into an availability problem at 9k queries/second, and choosing not to do that is the trade.
- Define the cutover numerically. Writes are untouched by the rebuild - they commit to the primary and land in the outbox - so the only coupling is apply throughput. If catch-up applies slower than the 4k events/second arriving, it never converges. The cutover criterion is that lag is measurably decreasing and below a stated threshold, not that the backfill loop reached the end of its range.
Follow-up
- The rebuilt index disagrees with the primary tables for 300 documents. Which is authoritative, and how do you decide without freezing writes?
- The rebuild doubles load on the log and pushes the projection p99 from 120 ms to 400 ms. What do you throttle, and which signal sets how much?
- Clients start polling until the watermark passes their write. What does that do at 9k queries/second, and what do you offer instead?
Keep one unresponsive destination from stalling all webhook delivery
Egress delivery sends about 1.5k webhooks/second to 40k destinations, with a per-destination concurrency cap of 4 and a 10-second connect-plus-read timeout. One destination begins accepting connections and never responding; within the hour 150 destinations behave the same way. Design the delivery path so unrelated destinations are unaffected: the pool structure, the timeouts, the retry policy, the per-destination circuit, and what is recorded so a retry is not a second effect at the receiver. State how many in-flight slots the degraded destinations hold and why that number decides the design.
Approach
- Start with the number, and with the law that produces it. In-flight work is arrival rate times time in service, so 1.5k/second against a healthy 200 ms response needs about 300 concurrent slots. Per destination the same product applies, ceilinged by the concurrency cap: at the fleet average of 0.0375 deliveries/second per destination (1.5k spread over 40k) a 10-second timeout is 0.375 slots. A destination that has queued retries behind it is a different regime - every slot refills the instant an attempt expires, so it sits pinned at its cap of 4 - and 150 of those hold 600 slots, more than a pool sized for healthy traffic, entirely consumed by endpoints that will never answer. The per-destination cap bounds one endpoint and says nothing about the aggregate, which is exactly why it alone is not containment.
- Contain with bulkheads and an admission bound rather than a larger pool. Cap total in-flight per pool and shard destinations across pools by a hash of destination id, so a correlated group - one provider, one region - cannot exceed its pool's share. A delivery refused admission and re-queued with backoff is strictly better than one holding a slot on behalf of a receiver that is not listening.
- Treat the timeout as two timeouts, and be exact about what shortening one buys. Connect and read are separate failures and both must be shorter than the budget of whatever is waiting. Occupancy is min(cap, arrival rate x timeout), so dropping the read ceiling from 10 seconds to 3 cuts a merely slow destination's occupancy proportionally, 0.375 slots to 0.11 at the fleet average. It does not cut the 4 slots held by one of the 150: a destination with a retry backlog arrives far above cap/timeout - 0.4/second at a 10-second timeout, 1.33/second at 3 - so it stays pinned at the cap either way and only the slot-seconds per attempt fall. What that does buy is detection rate: 3.3x more failures observed per second on the same four slots, which is how fast the circuit reaches its threshold. Pick the value from the measured latency distribution of successful deliveries, with their high percentile as the floor, not from a round number.
- Add a circuit per destination, counting a timeout as a failure. Once open, fail fast without taking a slot - that is the whole point, converting 4 held slots into zero. Half-open on a schedule with exactly one probe and close only if the probe succeeds, so a permanently dead endpoint costs one request per interval instead of a growing retry queue.
- Make retries safe and non-synchronising. Back off with full jitter, sleeping a random value in [0, min(cap, base x 2^attempt)], because a fixed delay re-synchronises every failed delivery to one destination into a simultaneous burst. Delivery is at-least-once, so the payload carries the event id under the signature and the receiver deduplicates on it; record the attempt against (destination, event id) rather than a bare success flag, so a lost response does not become a second business effect on the other side.
Worked solution 25 min
- Compute healthy in-flight from rate times latency, then slots held by 150 destinations at the cap and the full timeout, and compare both against one pool size.
- Write the pool sharding rule and the admission bound, and state what a refused delivery does next.
- Pick connect and read timeouts from the success-latency distribution, then compute min(cap, arrival rate x timeout) for an average destination and for one with a retry backlog, and say which of the two the shorter timeout actually moves.
- Write the circuit's state machine with its open threshold, probe interval and close condition, and the backoff formula with full jitter.
Follow-up
- The destination is not dead - it answers in 9.5 seconds with a 200. Does a failure-rate circuit open? Should anything shed that traffic, and on what signal?
- One destination requires deliveries in order. What does a per-destination concurrency of 4 do to that guarantee, and what would you change to offer it?
- A destination has been parked six hours with 900k undelivered events. What does resuming look like, and is delivering the whole backlog the right call?
Read latency spikes on a sixty-second sawtooth
The cached listing read path serves about 14k reads/second at an 85% hit rate. p99 sits at 35 ms for 57 seconds, jumps to 900 ms for 3, and repeats. During each spike the primary shows several hundred identical listing queries starting within the same millisecond, all carrying one large tenant's id. Cache entries use a 60-second TTL. Give the mechanism, the ordered checks, the fix, and the correctness hazard your fix must not introduce.
Approach
- Match the period to a configured number before theorising about load. A spike every 60 seconds against a 60-second TTL is an entry expiring, and you confirm it by correlating spike timestamps with the entry's write time rather than with the traffic curve. If the period had matched a cron or a GC interval instead, this is a different investigation.
- Establish the concurrency of the miss. Several hundred identical queries in one millisecond means the miss path has no coalescing: every request that arrives between expiry and repopulation recomputes. The herd size is that key's arrival rate times its recompute time, so at 1.2k reads/second for the hot key and a 250 ms recompute you expect about 300 concurrent misses, which matches what is observed.
- Add single-flight on the miss path so one caller per key recomputes under a short-lived lock while the rest wait for its result. Prefer stale-while-revalidate where the read tolerates it: return the expired value immediately and refresh asynchronously, which removes the latency spike rather than serialising it into a queue of waiters.
- De-synchronise the keys. Write TTLs with jitter, for example 60 seconds plus or minus 10%, so a deploy or a mass invalidation does not align every key on the same second and turn a per-key herd into a fleet-wide one.
- Name the hazard the fix must not introduce. Serving a stale listing is acceptable only because the API reports the projection watermark, and a reader that loaded the old value before a write can repopulate the entry after the invalidation, so the bounded TTL is what actually caps staleness rather than the delete. Keep read-after-write pinned to the primary for the writing session regardless.
- Verify on miss concurrency, not hit rate. The hit rate barely moves, because the herd is one miss multiplied; the number that must change is distinct origin queries per key per minute.
Follow-up
- The same sawtooth appears on a key that is invalidated on write rather than expired. Is that the same bug?
- How does your answer change if the recompute takes 4 seconds instead of 250 ms?
- What exactly does a client see during a stale-while-revalidate window, and how does the watermark let them tell?
For someone who has spent the last few years shipping features and reading other people's code, and who has not solved a timed problem from a blank file in a long time. Five days rebuild the primitives and the patterns that sit on them, working from invariants rather than remembered solutions, and the last two attach that back to the rest of the loop.
Prepare, practise & reflect
One practical outcome each day. Spend longer where you need it.
0 / 7 done01Rebuild the primitives by implementing them
- Implement a dynamic array with doubling growth and an operation counter, then change the growth rule to add a fixed sixteen slots instead, and time both for n of ten thousand, a hundred thousand and a million. The fixed-increment version resizes n/16 times at O(n) each, so its total work is quadratic; doubling is what makes append amortised constant.
- Implement a hash map with separate chaining and a load-factor resize, then insert ten thousand keys engineered to land in one bucket and record what happens to lookup time, so that average-case O(1) becomes a claim with a stated precondition rather than a reflex.
- For dynamic-array append and hash-map insert, write down which cost is amortised rather than worst-case, which single operation pays the whole bill, and what a system with a hard per-operation deadline would have to do instead.
Deliverable: Two working implementations plus a timing table showing the input at which each structure's advertised complexity stops holding.
Practice prompt ↗Practice prompt ↗Practice prompt ↗Worked solution ↗02Arrays under an invariant: two pointers, sliding window, binary search
- Solve longest-subarray-with-sum-at-most-K using a sliding window, then run it on an input containing negative numbers and watch it return the wrong answer: extending the window only moves the sum monotonically when every element is non-negative, and that precondition is the whole reason the technique works.
- Write the binary search that finds the first index satisfying a predicate rather than an exact value, put the loop invariant above the loop in a comment, and verify termination on the two inputs that break careless versions: the empty range, and a range where every element satisfies the predicate.
- Compute the midpoint as lo + (hi - lo) / 2 and write one line on why the obvious (lo + hi) / 2 is a genuine defect in a fixed-width integer type and a non-issue in a language with arbitrary-precision integers.
Deliverable: Three solved problems, each with its invariant written above the loop, plus one recorded input on which the sliding window is provably wrong.
Practice prompt ↗Practice prompt ↗03Sorting, heaps, and the greedy argument that has to be proved
- Solve one top-k problem three ways, by full sort, by a size-k heap, and by quickselect, then write the values of n and k at which each becomes the right choice, along with quickselect's quadratic worst case and why a randomised pivot makes that unlikely rather than impossible.
- Implement bottom-up heapify and count sift-down steps to confirm it does linear work rather than n log n, because most nodes sit near the bottom of the tree and therefore move only a short distance.
- Take interval scheduling by earliest finishing time and write the exchange argument out in full: given any optimal schedule, swapping in the earliest-finishing interval keeps it feasible and no smaller. Then construct the weighted variant where that same greedy fails and name what has to replace it.
Deliverable: A three-way top-k comparison with measured crossover points, one written exchange argument, and one counterexample to a greedy rule that looks almost identical.
Practice prompt ↗Practice prompt ↗04Recursion, memoisation, and the step to a table
- Take one problem with overlapping subproblems, such as edit distance or coin change, instrument the plain recursion with a call counter to show the blow-up, then add memoisation and re-count.
- Convert the memoised version to a bottom-up table and state the two properties you relied on: each subproblem's result depends only on its arguments, and the dependencies form a DAG you can enumerate in order.
- Rewrite one deep recursion with an explicit stack, then find the input length at which the original hits the interpreter's frame limit, which defaults to about a thousand frames in CPython, so you know when the rewrite is required rather than decorative.
Deliverable: One problem in three forms, naive, memoised and tabulated, with call counts for each and the input length at which recursion depth becomes the binding constraint.
Practice prompt ↗Practice prompt ↗Worked solution ↗05Graphs, where most of the work is choosing the traversal
- Implement BFS and DFS over one adjacency list, then answer for each which finds a shortest path in an unweighted graph and which you would use to detect a cycle in a directed graph, including why the in-progress versus finished distinction matters for the second.
- Implement topological sort by in-degree, feed it a graph containing a cycle, and confirm the failure signature is that fewer than V nodes come out rather than an exception, then note that the order it produces is one of several valid ones.
- Run a shortest-path search on a graph with a single negative edge weight and show the wrong answer, then write the precondition Dijkstra actually needs, non-negative weights, because it finalises a node's distance the first time that node is popped, and name the algorithm you would switch to and its own limit.
Deliverable: A small graph library with BFS, DFS and topological sort, plus two inputs that produce documented wrong answers under the wrong algorithm choice.
Practice prompt ↗Practice prompt ↗06One day for everything that is not an algorithm
- Sketch one system only to the depth a coding-heavy loop tends to reach: the endpoints, what the service stores, and the single query pattern that decides the schema. Stop at twenty-five minutes.
- Prepare the project answer for an interviewer who codes, which means rehearsing the two levels they push to: the specific thing you built, and why you chose that approach over the alternative they will name. Open with a number and be ready to say what it excludes.
- Prepare the answer to what you would do differently, choosing a real technical mistake with a specific fix rather than a complaint about process or staffing.
Deliverable: One design sketch at endpoint-and-schema depth, plus a project answer rehearsed to two levels of follow-up.
Practice prompt ↗Practice prompt ↗07Solve out loud, under time
- Do three timed problems at twenty-five minutes each in a plain editor with no autocomplete and no execution until the end, then tally separately the failures that were syntax and the ones that were approach, because those two numbers call for different fixes.
- Narrate one solution from the first sentence, stating the approach and its complexity before writing any code, and rehearse the sentence you will use when you realise mid-solution that the approach is wrong.
- Re-solve from blank the two problems you were slowest on this week and compare the times against the day they first appeared.
Deliverable: A recording of one fully narrated solution and a tally that separates syntax failures from approach failures.
Practice prompt ↗Practice prompt ↗Worked solution ↗Expand any day for tasks and deliverables. Your progress is saved on this device.
Team size, service count and tickets closed say very little. Seniority shows in the decision you owned: what you chose not to build, which constraint you traded away, whose objection you had to resolve before anything could move. A large project where you executed someone else's plan is a small story.
How do you handle memory management when processing large-scale datase…
How do you handle memory management when processing large-scale datasets?
Approach
- State the situation in two sentences and spend the rest on the reasoning.
- Give the blast radius: what could have broken, and what you measured.
- Name the disagreement and how you resolved it with evidence.
Follow-up
- What would you do differently if you ran that again?
- How did you know your change caused the improvement?
How do you handle imbalanced datasets in predictive maintenance models…
How do you handle imbalanced datasets in predictive maintenance models?
Approach
- Give the blast radius: what could have broken, and what you measured.
- Close with what you would do differently, concretely.
- Name the disagreement and how you resolved it with evidence.
Follow-up
- How did you know your change caused the improvement?
- What did you decide not to do, and why?
Narrate an outage you owned from page to postmortem
Pick an incident you personally drove, ideally one where writes were affected rather than reads. In six to eight minutes: state the symptom as it first appeared on a dashboard, the blast radius you established before you knew the cause, the mitigation you applied and when, the mechanism you eventually proved, and the follow-up that would prevent a repeat. Bring numbers: error rate, tenants affected, minutes to mitigate, minutes to resolve. If you cannot name what you measured, choose a different incident.
Approach
- Open on the signal rather than the cause: which metric at which percentile moved, on which service, at what time, so the listener follows the same evidence you had rather than a conclusion you already reached.
- Separate mitigation from diagnosis out loud. State what you did to stop the bleeding (flag off, shed traffic, drain a lease, roll back a deploy) and say plainly that you did it before the mechanism was known, because those are two jobs with different deadlines.
- Establish blast radius in countable terms: how many tenants, how many writes, and crucially whether the effect was loss or only delay. An append-only revision table or a pending outbox row means the change survived and the projection was merely behind, which is a repair rather than a data-loss incident.
- Prove the mechanism instead of asserting it. Name the trace span that grew, the plan that flipped to a sequential scan, the lease that expired, plus one alternative you ruled out and the signal that stayed flat while you ruled it out.
- Close on the durable fix and its cost, distinguishing what landed that week from what needed an expand-and-contract migration across several deploys, and say which of the two you actually finished.
Follow-up
- What would you do differently in the first five minutes, given the same dashboard and no more information?
- Which follow-up action did you deliberately not take, and why was dropping it the right call?
- How did you convince yourself the mitigation was safe to apply while the cause was still unknown?
- 01
How do you handle memory management when processing large-scale datasets?
- 02
How do you handle imbalanced datasets in predictive maintenance models?
- 03
Pick an incident you personally drove, ideally one where writes were affected rather than reads. In six to eight minutes: state the symptom as it first appeared on a dashboard, the blast radius you established before you knew the cause, the mitigation you applied and when, the mechanism you eventually proved, and the follow-up that would prevent a repeat. Bring numbers: error rate, tenants affected, minutes to mitigate, minutes to resolve. If you cannot name what you measured, choose a different incident.
Is this an official Shell interview guide?
No. It is PracHub's own research and practice material for the Machine Learning Engineer role at Shell. Rounds and questions reflect what candidates have reported, not a process Shell has published, and they change over time. Confirm the current format and scope with your recruiter.
PracHub interview research ↗How long does the interview process typically take?
The timeline can vary, but expect a multi-week process. Some candidates have reported waiting for final approvals, so patience and professional follow-up are important traits to maintain.
PracHub interview research ↗Is the technical interview focused on LeetCode-style questions?
While algorithmic efficiency is part of the assessment, expect a stronger focus on practical engineering, code quality, and the ability to explain the "why" behind your technical decisions.
PracHub interview research ↗How should I prepare for the personality or behavioral assessments?
Shell has a distinct corporate culture. Focus on answering these honestly while highlighting traits like integrity, collaboration, and a results-oriented mindset.
PracHub interview research ↗Sources & methodology 3 sources ↗
No official company page is cited. Rounds and questions come from candidate reports and PracHub editorial material; each source shows the date it was read.
- 01PracHub interview research ↗
PracHub editorial research into this company and role, maintained with this guide. Candidate-reported, not an employer publication.
PracHub page · Accessed 2026-09-30 - 02PracHub Machine Learning Engineer practice ↗
Cross-company practice questions for this role.
PracHub page · Accessed 2026-09-30 - 03PracHub interview preparation framework ↗
The framework the preparation plan follows.
PracHub page · Accessed 2026-09-30