This guide covers what a Data Scientist at Shift Technology is expected to do and how to prepare for the interview.
Initial Screening
reportedA screening call is a matching exercise run by someone who will not evaluate your statistics. They are checking that the work described on your resume is work you personally did, and that its scope matches the level the role is written for. Logistics get settled in the same half hour so nobody spends an interviewer's afternoon on a mismatch. The answer that fails is the one narrated in the plural. If every sentence is 'we built' and 'the team decided', there is nothing specific to write down about you. Name the piece that was yours, the decision you made inside it, and what changed after.
What to demonstrate
- Whether the ownership implied by your resume survives one round of follow-up about who actually did which part
- Whether your described scope (data size, stakeholders, what shipped) matches the seniority the role is written at
- Whether timeline, location and compensation expectations make the rest of the loop worth scheduling
How to prepare
- Rewrite your top three resume bullets in the first person singular, each with the decision you made and what moved afterwards, then say them out loud once so the 'we' does not return under pressure
- Attach one number to each project: the baseline, the change, and the window it was measured over. Where impact was never measured, say that plainly rather than inventing a figure
- Settle your compensation range before the call and give it as a range with a reason behind it, such as current total comp or a competing timeline, instead of deflecting the question twice
Online Technical Assessment
reportedThis round decides whether someone can hand you a schema and a question and trust the number that comes back. Correctness under a clock is the bar, not clever syntax. The habit that separates strong from weak answers is checking the grain: after every join, know how many rows you expect and whether the count moved. Most wrong answers in this format are not wrong logic, they are a fan-out from a key that turned out not to be unique, or a filter applied before an aggregate when it belonged after. Say what you expect before you run it.
What to demonstrate
- Whether your row counts survive each join, and whether you notice on your own when they do not
- Deliberate handling of rows that fail to match, including whether the question needs an inner join or a left join with the non-matches kept and counted
- Whether NULLs are treated on purpose, given that a NULL compares equal to nothing and that COUNT of a column skips it
- Reaching a defensible answer inside the window instead of a refined one after it
How to prepare
- Take a two-table schema, write a join that fans out on purpose, then fix it by collapsing the many-side to one row per key before joining. Repeat until the fix is reflex rather than recall.
- Write a funnel as one query and print the distinct user count at each stage, then confirm each stage is a subset of the one above it rather than assuming it
- Do a few timed runs in a plain text box with no autocomplete and no formatter, since assessment editors often have neither
Deep-Dive Technical Interviews
reportedMuch of what gets scored here happens out loud while you type. Nobody can see your reasoning inside a half-written query, so five silent minutes read as being stuck even when they are not. State the plan in plain language first: which tables, what grain you are aggregating to, and the one filter that defines the population. Then write it. The narration doubles as insurance, because a wrong plan gets caught early and cheaply while a wrong query gets caught at the end with no time left to redo it. A timed statistics section, where one exists, is a separate test with its own clock.
What to demonstrate
- Whether the query you write matches the plan you just described
- What you do with a hint, meaning whether the correction gets absorbed or the first approach gets defended
- Whether you can debug your own wrong output by reading the result set and naming which part of the query produced the anomaly
How to prepare
- Solve three problems while screen-sharing into a recording, then watch it back and mark every stretch longer than thirty seconds where you said nothing
- Practise compressing the plan into one sentence before typing, then check afterwards whether the finished query actually matched it
- Time yourself on statistics questions that carry a business reading, such as what a confidence interval does and does not claim, rather than re-reading notes without a clock
Final Interview
reportedWhere a loop ends with a senior leader, that conversation is rarely another skills test. The technical signal already exists by then, so the questions tend to open up: what you would look at first, where a metric you have heard about could mislead, what you would push back on. The decision being made is scope, which in practice means level and how much you would be trusted to own unsupervised. Treating it as a formality is the usual mistake. An open question late in the day is still being scored, and a vague answer reads as someone who has not run anything themselves.
What to demonstrate
- Whether your view of the business has anything specific behind it, given that you are working only from what is public and are expected to say so
- Whether the scope of work you describe owning matches the scope of the role, instead of sitting a level below it
- Whether you can disagree with something concrete and stay useful about it, rather than agreeing with everything said in the room
- Whether your questions are ones only this person could answer, as opposed to ones the recruiter already covered
How to prepare
- Build one view you could defend for two minutes using only public information: what the funnel probably looks like, which metric likely drives decisions, and where that metric could mislead. Being wrong for a stated reason survives this round; having no view does not
- Write down the largest piece of work you have owned from question to decision, who else touched it, and what you decided alone, then check that it reads at the level you are interviewing for
- Prepare one thing you would want changed if you joined and phrase it as a question rather than a verdict, so it opens a conversation instead of closing one
PracHub editorial advice for the preparation topics above.
Reading consumption metrics before the metering lag window has closed
Usage pipelines land late and correct themselves, which is exactly what is_restated and restated_at record. A dashboard queried on day T sees a partially populated tail for the last several days, so the most recent points always slope downward and always look like a regression. Analysts then explain the artefact, and sometimes ship a change to fix it. Establish the empirical settling time by measuring how much a given usage_date's total moves between first_written_at and its final value, exclude that many trailing days from every reportable figure, and never compare a fresh period against a settled one.
Computing monthly churn against the entire customer base when contracts are annual
An annual contract has no opportunity to churn except at its renewal date, so an account that is eleven months from renewal is in the denominator while being incapable of appearing in the numerator. The resulting rate is smaller than the real one by roughly the ratio of the base to the renewal-eligible base, and it oscillates with the seasonality of when deals were originally signed rather than with anything about the customers. The corresponding trap on the other side is counting a churn on the date the record was updated rather than on term_end_date, which shifts losses into whichever month the operations team did its paperwork.
Optimising accuracy on a heavily imbalanced target
State the base rate first, then choose the metric from the relative cost of a false positive against a false negative: precision and recall at the operating threshold, PR-AUC, or expected cost. At a 1 percent positive rate, predicting the majority class for everyone scores 99 percent accuracy and is worthless.
Comparing periods without accounting for seasonality or day-of-week
Compare whole weeks against whole weeks and check whether the same swing appeared in prior cycles or prior years before attributing it to anything you changed. Weekday and weekend populations often differ enough that a Tuesday-to-Saturday comparison is meaningless.
Choose a category, try a prompt, then open its approach, worked solution or follow-up when you need it.
A person takes one of two trains. Train A arrives every 10 minutes, an…
A person takes one of two trains. Train A arrives every 10 minutes, and Train B arrives every 10 minutes. Why does the person end up taking Train B 75% of the time?
Approach
- Quantify uncertainty explicitly rather than reporting a point estimate alone.
- Sanity-check the answer against a simple bound or a simulated case.
- Say what the estimate is of, and over what population it generalises.
Follow-up
- Which assumption here is most likely to be violated in practice?
- How would you explain this result to someone who does not know statistics?
Explain the difference between covariance and correlation, and how you…
Explain the difference between covariance and correlation, and how you would identify collinearity in a high-dimensional dataset.
Approach
- Say what the estimate is of, and over what population it generalises.
- Translate the result into the decision it informs, in one plain sentence.
- Write down the assumption the method needs before you use the method.
Follow-up
- How would you explain this result to someone who does not know statistics?
- What sample size would you need to detect an effect half this size?
Walk through a code implementation of a RandomForestClassifier and ide…
Walk through a code implementation of a RandomForestClassifier and identify potential sources of data leakage during the feature engineering and data splitting phases.
Approach
- Frame the prediction: the label, the moment of prediction, and the action it triggers.
- Check what information would not exist at prediction time, and exclude it.
- Set a baseline first, so any model has something honest to beat.
Follow-up
- How would you choose the decision threshold, and who owns that choice?
- Where could label leakage enter this setup?
How would you design a machine learning system to predict the likeliho…
How would you design a machine learning system to predict the likelihood of collusion among multiple healthcare providers submitting suspicious claims?
Approach
- Say how the offline result would be validated online before it is trusted.
- Check what information would not exist at prediction time, and exclude it.
- Pick an evaluation metric that matches the cost of each error type, not a default.
Follow-up
- Where could label leakage enter this setup?
- What would you monitor after launch to know the model is still valid?
Audit daily usage rows for grain and arithmetic violations
You are handed fct_usage_daily as a pandas DataFrame with account_id, workspace_id, sku_code, usage_date, billable_quantity, included_quantity_applied, overage_quantity, list_amount_cents, discount_amount_cents, net_amount_cents, cogs_cents, is_restated, first_written_at and restated_at. The declared grain is one row per (account_id, workspace_id, sku_code, usage_date). Write audit(df) returning a DataFrame with one row per failing check: check name, failing row count, and one example key. Cover at minimum grain duplication, negative quantities or amounts, the identity net = list - discount, billable = included + overage, and rows where is_restated is true but restated_at is null.
Approach
- Check the grain before anything else with df.duplicated(subset=key, keep=False), and count rows rather than groups so a key appearing twice contributes 2 — if the grain is broken every arithmetic count below it is uninterpretable.
- Express each invariant as a boolean Series over the whole frame. The cent columns are integers and compare exactly, so use !=; the numeric(18,6) quantity columns need np.isclose with atol=1e-6 because included + overage is a decimal sum.
- Handle null as its own failure mode. Comparisons against NaN return False, so a check written as rows_that_pass = (a == b - c) silently files every null-amount row wherever the negation happens to land; build each check as violations = ~condition | column.isna().
- Collect the checks as a list of (name, mask) pairs and assemble the output in one pass, so adding a check is one line and every check reports in the same shape.
- Order the output with structural failures (grain, null keys) above arithmetic failures, and report zero-count checks too — a check that silently disappears when it passes is indistinguishable from a check that was never run.
Worked solution 20 min
- key = ['account_id','workspace_id','sku_code','usage_date']; dup = df.duplicated(key, keep=False); record dup.sum() and df.loc[dup, key].iloc[0].to_dict() as the example.
- neg = (df[['billable_quantity','included_quantity_applied','overage_quantity','list_amount_cents','net_amount_cents','cogs_cents']] < 0).any(axis=1); net_bad = df.net_amount_cents.isna() | (df.net_amount_cents != df.list_amount_cents - df.discount_amount_cents).
- qty_bad = ~np.isclose(df.billable_quantity, df.included_quantity_applied + df.overage_quantity, atol=1e-6) | df.billable_quantity.isna(); restated_bad = df.is_restated & df.restated_at.isna().
- Assemble pd.DataFrame([{'check': n, 'failing_rows': int(m.sum()), 'example': first_key(m)} for n, m in checks]) with the grain and null checks listed first.
Follow-up
- Which of these should block a dashboard refresh and which should only warn?
- Rows with is_restated = true legitimately change value after first write. How do you make yesterday's audit result reproducible?
- How would you extend this to catch a partition that is missing entirely rather than wrong?
How do you optimize a slow-running SQL query that involves multiple jo…
How do you optimize a slow-running SQL query that involves multiple joins across large transaction tables?
Approach
- State the window function and its partition and ordering out loud before writing it.
- Compute rates by summing numerator and denominator separately, never by averaging rates.
- Check whether any join is one-to-many before aggregating, or the sums inflate.
Follow-up
- How does the query change if the join becomes one-to-many?
- How would you verify this result without re-running the same query?
Write a SQL query to identify duplicate claims filed by the same polic…
Write a SQL query to identify duplicate claims filed by the same policyholder within a 24-hour window.
Approach
- Check whether any join is one-to-many before aggregating, or the sums inflate.
- Compute rates by summing numerator and denominator separately, never by averaging rates.
- State the window function and its partition and ordering out loud before writing it.
Follow-up
- How does the query change if the join becomes one-to-many?
- How would you verify this result without re-running the same query?
Describe how you would implement a singleton pattern for a database co…
Describe how you would implement a singleton pattern for a database connection pool in a multi-threaded environment.
Approach
- Say which table is the grain you start from, and join outward from it.
- Check whether any join is one-to-many before aggregating, or the sums inflate.
- Compute rates by summing numerator and denominator separately, never by averaging rates.
Follow-up
- How does the query change if the join becomes one-to-many?
- How would you verify this result without re-running the same query?
Find paid seats that never called the API
dim_user_membership carries user_id, account_id, seat_type, is_service_account, deactivated_at and last_seen_at. fct_api_request carries user_id, which is null whenever the caller is a service account or an unattended key, plus account_id, request_at and http_status. For a single account, list every licensed_paid seat with is_service_account = false and deactivated_at null that issued no request at all in the trailing 90 days, returning user_id and last_seen_at. A first draft writes NOT IN against a subquery over fct_api_request.user_id. State exactly what that draft returns and why, then write the correct query.
Approach
- Read the column comment first: user_id is nullable on the fact, so the subquery almost certainly contains at least one NULL for any account that runs a service account or an unattended key.
- Work the three-valued logic out loud. x NOT IN (a, NULL) expands to NOT (x = a OR x = NULL); the second disjunct is UNKNOWN, so for any x not equal to a the whole predicate is UNKNOWN and the row is filtered out. The draft returns zero rows, which reads as full seat utilisation.
- Rewrite as NOT EXISTS with the 90-day and status predicates inside the correlated subquery. Putting them in the outer WHERE instead turns the anti-join into a different question and silently changes the answer.
- Correlate on both user_id and account_id. A membership is (user_id, account_id) and one person can hold memberships in several accounts, so correlating on user_id alone marks a seat as active because that human was busy somewhere else.
- Filter the seat side to seat_type = 'licensed_paid', is_service_account = false and deactivated_at IS NULL, and say what the resulting count means next to contracted_seats on the current subscription row.
Worked solution 15 min
- Confirm the hazard with one query: SELECT count(*) FROM fct_api_request WHERE user_id IS NULL AND account_id = :account_id. Any non-zero result proves the draft returns nothing.
- Write the seat side: SELECT user_id, last_seen_at FROM dim_user_membership WHERE account_id = :account_id AND seat_type = 'licensed_paid' AND NOT is_service_account AND deactivated_at IS NULL.
- Attach AND NOT EXISTS (SELECT 1 FROM fct_api_request r WHERE r.user_id = m.user_id AND r.account_id = m.account_id AND r.request_at >= now() - interval '90 days').
- Compare the row count against the same query written as a LEFT JOIN with a WHERE r.user_id IS NULL; the two must agree exactly.
- Divide the active seat count by contracted_seats from the account's current fct_subscription_period row and state the utilisation figure.
Follow-up
- Adding AND user_id IS NOT NULL to the subquery also fixes NOT IN. Why is NOT EXISTS still the form you would leave in the repository?
- last_seen_at looks like a shortcut for the whole query. What does it actually record, and where does it disagree with API activity?
- This is a seat-reduction risk list. What threshold would you attach before handing it to an account team, and what happens to seats below it?
Given a highly imbalanced dataset where fraud represents less than 1% …
Given a highly imbalanced dataset where fraud represents less than 1% of the samples, which evaluation metrics would you prioritize and why?
Approach
- State what result would change your recommendation, so the answer is falsifiable.
- Restate the decision this analysis has to support, and who acts on the answer.
- Decompose the metric into the rates that drive it, and say which one you would check first.
Follow-up
- Which segment would you cut first, and what would that rule out?
- What would you do if the primary metric and the guardrail moved in opposite directions?
Write a function to validate nested formatting structures (such as mat…
Write a function to validate nested formatting structures (such as matching brackets or parentheses) in a text stream.
Approach
- State your assumptions explicitly before working the problem.
- Clarify what is being asked and what a complete answer would contain.
- Work from the decision backwards to the evidence you would need.
Follow-up
- What assumption would you test first?
- How would you know your answer was wrong?
Measure named coverage at an assignment threshold you cannot randomise
Named customer-success coverage is assigned to accounts whose arr_cents at fiscal-year start is at least $50,000. About 88% of accounts above the line receive a named owner and about 9% below it do, through documented exceptions. Roughly 200 accounts sit within $15,000 of the cutoff, and gross logo retention on the renewal-eligible base runs near 0.88. Estimate the effect of coverage on renewal, name the design, state its identifying assumptions and the test for each, and say whether this data can answer the question at all.
Approach
- Say first why the naive comparison is unusable, because the answer turns on it. Coverage is assigned to the largest accounts because they are valuable and to distressed accounts because they are at risk, so selection runs in both directions at once and the naive estimate can come out with either sign depending on which rule dominated. Matching on observed size does not fix it: the risk signal that triggered coverage is the same signal that predicts renewal.
- Name the design and the estimand together. This is a fuzzy regression discontinuity with the $50,000 threshold as an instrument for coverage. The estimator is the Wald ratio, the jump in renewal at the cutoff divided by the jump in coverage probability of 0.88 - 0.09 = 0.79, and the estimand is a local average treatment effect for accounts near $50,000 whose coverage is actually decided by the rule, not the average effect of coverage across the book.
- Fit it as local linear regression on each side with a triangular kernel and a data-driven bandwidth (Imbens-Kalyanaraman, or Calonico-Cattaneo-Titiunik with bias-corrected robust intervals). A global polynomial fitted across the whole ARR range is not a substitute and is well documented to manufacture spurious jumps at interior points.
- Test the assumptions instead of asserting them. Run a density test for bunching just above $50,000, which is exactly what a sales team structuring a deal at $50,001 to win coverage would produce and which invalidates the design outright. Check continuity at the cutoff of employee_band, acquisition_channel, deployment_model and pre-period usage. Run placebo cutoffs at other ARR values, and plot the estimate against bandwidth.
- Do the power arithmetic before promising an answer. With about 100 accounts per side and a renewal base rate of 0.88 (standard deviation 0.325), the sharp-design MDE at 80% power and two-sided 0.05 is 2.80 * 0.325 * sqrt(2/100) = about 12.9 percentage points, and dividing by the 0.79 first stage gives about 16 points on the fuzzy estimand. No plausible effect of assigning an account manager is that large.
- Give the honest verdict with a route forward attached. This design cannot answer the question on one fiscal year. Pool several years at the same cutoff, accepting the added assumption that the coverage model and the threshold's meaning were stable across them, or ask for a randomised holdout among accounts near the threshold, which is cheap to justify precisely because the rule is already arbitrary there.
Worked solution 45 min
- Plot the density of arr_cents in bins around $50,000 and run the manipulation test; stop and report the design as invalid if bunching is present.
- Plot the first stage, share of accounts with a named owner against ARR, and confirm the jump is close to 0.79 and locally flat on each side.
- Fit local linear regressions of renewal on ARR either side of the cutoff with a triangular kernel and data-driven bandwidth, take the Wald ratio, and report bias-corrected robust intervals.
- Run covariate-continuity checks, placebo cutoffs, and a bandwidth-sensitivity curve for the point estimate.
- Compute the MDE at the realised effective sample and write the verdict, powered or not, with the alternative design named.
Follow-up
- The density test shows clear bunching just above $50,000. Is any part of the design salvageable, and what would you report instead?
- Coverage also correlates with support ticket severity. Does adding severity as a control help, hurt, or do nothing in a regression discontinuity?
- If you pool five fiscal years to gain power, what new identifying assumption have you taken on, and how would you check it?
Activation drops six points starting at a deploy hour
Seven-day activation, defined as an account's first request with http_status < 400, api_key_id not null and traffic_class <> 'synthetic_monitor' within 168 hours of created_at, fell six points for sign-up cohorts after a Tuesday. A client SDK major version shipped that morning. From fct_api_request (account_id, api_key_id, sdk_name, sdk_version, http_status, traffic_class, request_at) and dim_account (account_id, created_at, is_internal), decide whether activation actually fell or the metric's inputs changed, and state in advance what evidence would convince you of each.
Approach
- Decompose the definition and recompute activation under each relaxation: status only, status plus traffic_class, then the full definition. If the entire drop lives in the api_key_id clause, this is an instrumentation question rather than a behavioural one.
- Measure the null rate of api_key_id by sdk_version and by hour. A stamping change appears as a step at the deploy boundary confined to the new version; a behavioural change appears as a ramp that grows with adoption and leaves old-version traffic untouched.
- Hold the cohort's SDK mix fixed before comparing. New sign-ups adopt the newest version first, so a cohort-level drop can be pure composition even when no individual version changed at all.
- Corroborate with a source the release did not touch: whether the same cohorts appear in fct_usage_daily with non-zero billable_quantity, and whether their fct_support_ticket rows with category = 'onboarding' rose.
- Write the decision rule down before looking at the answer. An instrumentation artefact predicts unchanged downstream usage and a version-confined null step; a real regression predicts falling downstream usage and more onboarding tickets in the same cohorts.
Follow-up
- Old-version and new-version populations are not exchangeable, because new accounts adopt the new version first. How would you build a comparison that is not confounded by cohort age?
- What backfill or metric-versioning policy keeps the historical series interpretable once you fix the stamping?
For someone who can already write the query and train the model but stalls when asked what to measure or whether a change is worth making. Metric definition and case structure come first; the technical work is kept as maintenance rather than the centre of the week.
Prepare, practise & reflect
One practical outcome each day. Spend longer where you need it.
0 / 7 done01Metric anatomy
- For three products you use daily, write one primary metric, two input metrics that plausibly move it, and one guardrail that would catch a cheap way of moving the primary at the cost of the product.
- For one of them, specify the metric precisely enough that two analysts would return the same number: numerator, denominator, unit of observation, time window, and how returning and deleted accounts are treated.
- Pick a ratio metric and write what happens to it when the denominator shrinks for reasons unrelated to the numerator, with a concrete example of that happening.
Deliverable: A one-page metric tree for one product, with the primary metric written as an unambiguous spec.
Practice prompt ↗Practice prompt ↗Practice prompt ↗Worked solution ↗02Diagnosing a drop without guessing
- Take the prompt "weekly active users fell 8 percent week over week" and write the segmentation plan before proposing any cause: platform, region, tenure cohort, acquisition channel, and whether the movement sits in the numerator or in a changed denominator.
- List the instrumentation failures that manufacture fake drops (a client release that stopped firing an event, a bot filter change, a shifted date boundary or timezone) and write the query that rules out each one.
- Rehearse stating the boring explanations first, seasonality and day-of-week composition, before reaching for a product cause.
Deliverable: A drop-diagnosis checklist short enough to recite from memory in under a minute.
Practice prompt ↗Practice prompt ↗Practice prompt ↗03Should we build it
- Take a feature idea and write it as a bet: what you believe is true, what would have to be true for it to pay off, the metric that would confirm it, and the effect size that would justify the engineering cost.
- Size the opportunity top-down and bottom-up, then reconcile the two numbers in writing instead of quoting whichever is friendlier.
- Write the counter-metric that would make you kill the feature even if it wins on the primary metric.
Deliverable: A one-page product memo ending in a decision rather than a list of considerations.
Practice prompt ↗Practice prompt ↗04The places aggregate numbers lie
- Construct a Simpson's paradox numerically: two segments where the treatment wins within each segment yet loses overall, and identify the shift in segment weights that causes it.
- Take a heavy right-tailed quantity such as revenue per user and write why the mean is the wrong summary, which percentile you would report instead, and what a moving mean with a stable median tells you.
- Write your definition of a session for the product from day one, then name two real behaviours it misclassifies.
Deliverable: One page holding a worked Simpson's paradox table and a session definition with its two known failure cases.
Practice prompt ↗Practice prompt ↗Worked solution ↗05Technical maintenance, aimed at metrics
- Solve four timed SQL prompts that all end in a ratio metric, so the question of grain stays live in every answer.
- Compute a 95 percent confidence interval for a proportion on a small sample, and state why the normal approximation is unreliable when either np or n(1 minus p) falls below roughly 10, along with which interval you would use instead.
- Take one metric from your day-one tree, write the query that computes it correctly, then write the query that computes it wrong in the most plausible way and explain how you would notice.
Deliverable: Four solved prompts plus a matched correct and plausible-wrong query for one metric.
Practice prompt ↗Practice prompt ↗06Turning engineering work into data science stories
- Write three project stories as situation, decision, trade-off, outcome, each carrying one number and one thing you got wrong.
- For the story you will lead with, prepare an answer to "what would you do differently" that names a decision you made, not a constraint you were handed.
- Practise the sentence that reframes a systems project as a question project: the question the work answered, ahead of the pipeline it shipped.
Deliverable: Three written stories with the lead story delivered aloud and timed under four minutes.
Practice prompt ↗Practice prompt ↗07Mock case and gap list
- Run a 40-minute mock case with someone playing a product manager who pushes back on your metric choice, and record it.
- Listen back and mark every moment you proposed a solution before the success metric existed.
- Rewrite those moments as the question you should have asked, and rehearse the first 90 seconds of the case until scoping comes before solving.
Deliverable: A recorded case plus a rewritten opening 90 seconds.
Practice prompt ↗Practice prompt ↗Worked solution ↗Expand any day for tasks and deliverables. Your progress is saved on this device.
Most data work is done by groups, so an interviewer has to work out which piece was yours. An answer that runs on 'we' for several minutes gets interrupted with a question about what you personally did, and by then the answer sounds defensive even when it is true. Mark your own contribution as you go, and name the parts that belonged to someone else instead of leaving them ambiguous. Keep a few specifics back as well, like the name of the metric or who actually objected, so a probe can be answered with something you had not already said.
How do you handle memory management and garbage collection in language…
How do you handle memory management and garbage collection in languages like Python or C#?
Approach
- Name the disagreement or constraint, and how you resolved it with evidence.
- Pick a story where you drove the decision, not one where you observed it.
- State the situation in two sentences and spend the rest on your reasoning.
Follow-up
- What did you decide not to do, and why?
- How did you know the outcome was caused by your change?
Allocate one analyst week across three competing requests
Three requests arrive the same morning and you have one week. Finance wants per-account gross margin from fct_usage_daily for a pricing review in three weeks. Sales wants a renewal-risk list for accounts with term_end_date inside 60 days. A product manager wants an experiment readout for a decision being taken on Thursday. Produce your allocation with hours attached, what you say to whoever receives less, and one thing you refuse to do this week, with the reason each decision is defensible to the person it costs.
Approach
- The interviewer is probing whether you prioritise on decision timing and reversibility or on who asked most forcefully. Sort by the date each decision is actually taken and by what the default outcome is if nothing arrives.
- Apply that sort concretely. The Thursday readout has a hard irreversible deadline and no value afterwards. The pricing review has three weeks of slack. The renewal list has a rolling deadline set by term_end_date, so part of it is urgent this week and the rest is not, which means it can be split rather than deferred whole.
- Find the cheapest sufficient version of each request rather than the full version. The readout goes in full. The renewal list ships as a filtered query over renewal-eligible accounts ranked by two inspectable signals rather than as a model. The margin work is scoped to the accounts that dominate the pricing decision, since revenue is heavily skewed and the tail will not change the conclusion.
- Make the trade visible in one written note to all three at once, with dates. Telling each person separately that they are the priority is how an allocation becomes a credibility problem.
- Refuse something explicitly and say why. The model version of the renewal list is the usual candidate, because it cannot be evaluated without a holdout nobody has agreed to yet, and building it this week forecloses that.
- Leave slack. A plan with none is a plan to miss the one deadline that cannot move.
Follow-up
- The sales leader escalates to your manager. What did you already do that makes that a short conversation?
- Which of the three deadlines would you push back on, and what exactly would you ask for?
- What would you change about how these requests reach you so next week is not the same?
Defend a churn number twelve times the one in the board deck
You recompute logo churn on the renewal-eligible base from fct_subscription_period, counting only accounts whose term_end_date fell in the month and allowing a 45-day grace for late paperwork. Annualised, about 14 percent of accounts that reach a renewal date do not renew. A revenue leader has been quoting 1.2 percent to the board for two quarters, computed by dividing non-renewed accounts by the entire customer base in each month and printing that monthly figure with no period attached. You have 20 minutes with that leader and the finance lead. Decide which number is reported from now on, and what happens to the two quarters already published.
Approach
- The interviewer is probing whether you can hold a correct definition under social pressure without turning it into a competence dispute. Open by reproducing their 1.2 percent exactly, with their denominator and their months, so the disagreement is arithmetic both sides can see rather than a claim about who was careless.
- Separate the two defects, because they are different in kind. The denominator is wrong: on annual contracts only about one twelfth of the base reaches a renewal date in any month, so an account eleven months from renewal sits in the denominator while being structurally incapable of entering the numerator, which suppresses the rate by a factor near twelve. The period is merely unstated: a monthly figure printed beside annual revenue targets gets read as an annual rate.
- Say out loud that those two defects nearly cancel in the level, before the leader finds it. Twelve times 1.2 percent is about 14 percent, which is your number. That is the strongest thing you can say in the room, because it proves both figures rest on the same non-renewal count and moves the meeting onto which denominator and which period get published rather than onto whose query is right.
- The level is recoverable; the series is not. Non-renewals in a month are the eligible base for that month times the churn rate, so dividing by a fixed whole base makes the published line proportional to how many contracts happen to come up that month. Where signings cluster at quarter ends, the eligible base in a quarter-end month can be several times a quiet month's, and the month-over-month moves the board has been reading as satisfaction are the signing calendar.
- Separate the measurement change from a business change. Nothing got worse this week; the loss rate was always this. Bring net revenue retention over the same period as a ratio of sums on a cohort frozen twelve months earlier, because logo churn concentrated in small accounts can sit beside healthy revenue retention, and that combination is the actual story.
- Offer a migration path rather than a correction. Report both rates for one quarter with a written bridge, restate the prior two quarters in an appendix instead of silently, and pin the definition, including the period it is stated over, somewhere finance and product both read it. Concede the limits of your own number: the 45-day grace means the most recent 45 days are not reportable, and churn must be dated on term_end_date rather than on updated_at. A strong answer volunteers this; a generic one only defends.
Follow-up
- The leader multiplies their monthly figure by twelve, lands on your annual number, and concludes nothing was ever wrong. What do you say?
- The leader says publishing the corrected rate costs the team its credibility with the board this quarter. What do you do?
- Gross logo retention worsened while net revenue retention improved. Which do you lead with, and what does the combination tell you about who is leaving?
- 01
How do you handle memory management and garbage collection in languages like Python or C#?
- 02
Three requests arrive the same morning and you have one week. Finance wants per-account gross margin from fct_usage_daily for a pricing review in three weeks. Sales wants a renewal-risk list for accounts with term_end_date inside 60 days. A product manager wants an experiment readout for a decision being taken on Thursday. Produce your allocation with hours attached, what you say to whoever receives less, and one thing you refuse to do this week, with the reason each decision is defensible to the person it costs.
- 03
You recompute logo churn on the renewal-eligible base from fct_subscription_period, counting only accounts whose term_end_date fell in the month and allowing a 45-day grace for late paperwork. Annualised, about 14 percent of accounts that reach a renewal date do not renew. A revenue leader has been quoting 1.2 percent to the board for two quarters, computed by dividing non-renewed accounts by the entire customer base in each month and printing that monthly figure with no period attached. You have 20 minutes with that leader and the finance lead. Decide which number is reported from now on, and what happens to the two quarters already published.
Is this an official Shift Technology interview guide?
No. It is PracHub's own research and practice material for the Data Scientist role at Shift Technology. Rounds and questions reflect what candidates have reported, not a process Shift Technology has published, and they change over time. Confirm the current format and scope with your recruiter.
PracHub interview research ↗How much software engineering knowledge is actually required for this role?
A significant amount. Unlike traditional data science roles that focus solely on model building, Shift Technology expects data scientists to write production-grade code. You will be evaluated heavily on OOP, data structures, algorithms, and code optimization.
PracHub interview research ↗What is the most common reason candidates fail the technical rounds?
Candidates often fail because they struggle with live coding under time constraints or fail to write clean, modular code. Writing "notebook-style" script code during an interview, neglecting time complexity, or failing to apply basic OOP principles are common reasons for rejection.
PracHub interview research ↗How does the company support professional growth?
Shift Technology fosters a strong learning culture, including initiatives like Focus Fridays—a dedicated half-day each month for personal development, learning new technologies, or working on passion projects.
PracHub interview research ↗What is the typical timeline for the hiring process?
The process is generally fast-paced, often taking between three to four weeks from the initial HR screen to the final decision, depending on candidate availability and scheduling.
PracHub interview research ↗Sources & methodology 3 sources ↗
No official company page is cited. Rounds and questions come from candidate reports and PracHub editorial material; each source shows the date it was read.
- 01PracHub interview research ↗
PracHub editorial research into this company and role, maintained with this guide. Candidate-reported, not an employer publication.
PracHub page · Accessed 2026-09-22 - 02PracHub Data Scientist practice ↗
Cross-company practice questions for this role.
PracHub page · Accessed 2026-09-22 - 03PracHub interview preparation framework ↗
The framework the preparation plan follows.
PracHub page · Accessed 2026-09-22
Explore related engineering environments and compare the preparation focus.
[24]7.ai Data Scientist Interview Questions & Guide 2026
Modeling drills for [24]7.ai data scientist prep: choosing a baseline, reading regression coefficients honestly, handling class imbalance, and defending a model you would actually ship.
Xcellent Technology Solutions Data Scientist Interview Questions & Guide 2026
Modeling drills for Xcellent Technology Solutions data scientist prep: choosing a baseline, reading regression coefficients honestly, handling class imbalance, and defending a model you would actually ship.
Wolters Kluwer Data Scientist Interview Questions & Guide 2026
Causal-inference exercises for Wolters Kluwer data scientist prep: difference-in-differences, matching, instrumental variables, and knowing when observational data simply cannot answer the question asked.
Zscaler Data Scientist Interview Questions & Guide 2026
Data-quality drills for Zscaler data scientist prep: survivorship and selection bias, leakage through time-ordered features, and extreme values where provenance decides the call. A logging fault or unit slip gets corrected or dropped; a gen