As a Software Engineer at Spericorn Technology, you are the engine behind the company’s ability to deliver high-quality digital transformation services. This role is pivotal in bridging the gap between complex client requirements and scalable, robust technical solutions. You will be expected to contribute across the full software development lifecycle, ensuring that the products developed are not only functional but also performant and maintainable.
The work environment at Spericorn Technology is fast-paced and project-driven. You will often find yourself collaborating with project architects, product managers, and fellow engineers to solve unique problems for a diverse range of clients. Whether you are building front-end interfaces, architecting back-end services, or optimizing system performance, your technical decisions directly impact the success of client engagements and the reputation of the firm.
Candidates often find that success at Spericorn Technology requires a balance between deep technical expertise in web technologies and the ability to articulate your problem-solving process clearly during high-pressure technical discussions.
Preparation focus
editorialNo round sequence has been reported for this company, so work the categories below and confirm the format with your recruiter.
What to demonstrate
- Breadth across SQL, experimentation and product reasoning
- Ability to state assumptions before choosing a method
How to prepare
- Drill the practice exercises below and time yourself
- Prepare three quantified stories about decisions you drove
PracHub editorial advice for the preparation topics above.
Serialising a tenant's writes through select ... for update on a single counter row
It is the first change that makes a counter correct, and it caps that tenant's write throughput at roughly one divided by the lock hold time. A transaction that takes the lock, makes a network call and then commits holds it for the entire round trip: at 2 ms that is about 500 writes per second for the whole tenant, and the largest tenants are exactly the ones that exceed it. The damage then spreads, because every waiter holds a database connection while it queues, so one hot tenant drains the shared pool and the symptom presents as a site-wide latency incident rather than as a lock problem. The repairs are to shrink the critical section to a single statement, to shard the counter into per-(tenant, hour) or per-(tenant, bucket) rows and sum on read, or to batch in memory and flush periodically while accepting the bounded loss that batching implies.
Paginating a growing table with limit and offset
Two unrelated defects share the idiom. Correctness: rows inserted or deleted between page requests shift the window, so a consumer walking an export skips rows and sees others twice, which for a customer-facing sync is silent data loss rather than an error anyone notices. Cost: the database still produces and discards the skipped rows, so page N costs time proportional to N times the page size and a deep page on a large table degrades from milliseconds to seconds. Keyset pagination over a stable, unique, indexed ordering -- where (created_at, id) < ($1, $2) order by created_at desc, id desc limit $3 -- is constant-cost per page and immune to shifting, on the precondition that the cursor columns never change value for a row, which disqualifies updated_at as a cursor.
Choosing a schema before the access patterns are known
Write the queries first, with their filters, sort orders, cardinalities and which ones sit on the latency-critical path, then design tables and indexes to serve them. An index nothing queries still costs write throughput and storage, and a hot query with no supporting index becomes a full scan that only hurts once the table is big.
Tests that assert on the implementation rather than the behaviour
Assert on what a caller can observe, not on the number of internal calls or the shape of a private field. A test that breaks on every refactor but still passes when the answer is wrong costs more than it protects.
Choose a category, try a prompt, then open its approach, worked solution or follow-up when you need it.
Find peak concurrent sandbox usage from run intervals
Given up to 5 million job_run rows for one tenant over one day, with run_id, started_at, finished_at, status and wall_clock_limit_seconds, report the maximum number of sandboxes running at once, the earliest instant that maximum is reached, and the first run_id that would breach a per-tenant cap of C. started_at is null while a run is queued; finished_at is null both for runs still executing and for runs in status lost. Treat a run as occupying [started_at, finished_at). Give the complexity and state how you handle each null.
Approach
- Turn each run into two sweep events,
(started_at, +1)and(end, -1), then sort the 2n events by timestamp with-1ordered before+1at equal timestamps. That tie-break is what makes the interval half-open, so a run finishing at 10:00:00 and one starting at 10:00:00 never overlap. - Decide each null out loud before sweeping, because each choice moves the answer. A null
started_atmeans queued and contributes nothing. A nullfinished_atwith statusrunningorleasedis clipped to the window end. Statuslosthas no observed end at all, so clip it atstarted_at + wall_clock_limit_secondson the grounds that the supervisor owns the timeout, and record that you did. The table'scheck (finished_at is null or started_at is not null)guarantees you never see an end without a start. - Sweep once, maintaining a running counter, the maximum, and the timestamp at which the maximum was first attained (update
peak_atonly on a strict increase, or you will report the last such instant instead of the earliest). Capture the firstrun_idwhose+1takes the counter to C+1 during the same sweep rather than in a second pass. - Complexity: O(n log n) dominated by the sort, O(n) space. If rows already arrive ordered by
started_at, a min-heap of end times gives O(n log k) time and O(k) space with k the peak concurrency, which is the better shape when the rows come from an index scan on(tenant_id, started_at). - If second resolution is acceptable, counting-sort the endpoints into an 86,400-slot delta array and prefix-sum it: O(n + T) time and O(T) space, which beats the comparison sort at 5 million rows. It answers only at second granularity, so state which resolution the cap is defined in.
Follow-up
- Now report peak concurrency per tenant for 10,000 tenants from one globally sorted stream. What changes about memory and about the sort?
- The cap has to be enforced at dispatch rather than reported afterwards. What does the admission check look like, and where does it race?
- How would you answer 'peak concurrency within any 5-minute window' without re-sorting?
Order a job dependency graph and find its critical path
A workspace defines up to 50,000 jobs with up to 200,000 dependency edges and an estimated duration_seconds per job. Given the edge list, reject the graph if it contains a cycle and name one cycle's nodes; otherwise return a valid execution order, the earliest possible completion time with unlimited workers, and the set of jobs whose slack is zero. Then say which single job to shorten in order to cut the completion time, and by exactly how much. State the complexity of each part.
Approach
- Kahn's algorithm for the order: compute indegrees, seed a queue with zero-indegree nodes, emit and decrement. O(V + E), which at 50,000 and 200,000 is milliseconds. If fewer than V nodes are emitted, the graph contains a cycle.
- Kahn detects a cycle but cannot name one. The nodes left with indegree above zero contain every cycle, so run one DFS restricted to that residual subgraph with three-colour marking and report the stack slice from the grey node the back edge points at. That is the difference between a usable error message and 'dependency cycle detected'.
- Earliest completion with unlimited workers is the longest path, which is NP-hard on a general graph and linear on a DAG. State the precondition, then relax in topological order:
earliest_finish[v] = duration[v] + max(earliest_finish[u] for u in preds(v)), taking the max over an empty predecessor set as zero. The makespan T is the maximum over all nodes. O(V + E). - Second pass in reverse topological order for
latest_finish, thenslack[v] = latest_finish[v] - earliest_finish[v]. Zero-slack nodes form the critical path, and there can be several disjoint critical paths, so return the set rather than one chain.slack[v] = 0is exactly the statement that some longest path runs through v; equivalently, the longest path through v has lengthT - slack[v]. - The speed-up bound is the point of the question, and the obvious form of it is wrong. Shortening a zero-slack job v by d, with 0 <= d <= duration[v], cuts the makespan by
min(d, T - L_avoid(v)), whereL_avoid(v)is the longest path in the graph with v deleted: the longest path that avoids v, not the second-longest path overall. The two coincide only when the runner-up path misses v. Counterexample: A of 10 s feeds both B of 5 s and C of 4 s, so T = 15 s and the second-longest path is 14 s, yet shortening A by 10 s leaves a makespan of 5 s. The realised gain is the full 10 s, because both paths ran through A and shrank together, whilemin(10, 15 - 14)predicts 1 s. The reason is structural: shortening v reduces every path through v by d and leaves every other path alone, so the new makespan ismax(T - d, L_avoid(v)). - Compute
L_avoid(v)the direct way: delete v and re-run the same forward relaxation, O(V + E) per candidate. The cheaper equivalent skips the deletion, sinceL_avoid(v)only ever matters through that max: setduration[v] := 0, recompute the makespan asT0(v) = max(T - duration[v], L_avoid(v)), and the gain ismin(d, T - T0(v)), which is identical for every d <= duration[v]. Only zero-slack jobs are candidates, because shortening a job with positive slack changes the completion time not at all. One relaxation is milliseconds at this size, so ranking a critical set in the hundreds costs O(k(V + E)) and is worth doing exactly; a critical set in the tens of thousands is not, and there you evaluate a shortlist, longest jobs first, and say that the answer is the best of that shortlist rather than the optimum.
Follow-up
- Only m workers are available. What happens to your answer, and what can you still promise about the schedule you produce?
- Edges arrive incrementally as the customer edits the pipeline. How do you detect a cycle at insert time without re-running Kahn over 250,000 elements?
- Durations are estimates. How would you express completion time as a distribution, and what breaks about the critical path once you do?
Hold a tenant to a trailing sixty-second request limit
The gateway must hold each tenant to R requests in any trailing 60 seconds, in aggregate across three regions and every pod, within a budget of under 10 ms added p99. Peak is 30,000 requests/second across 200,000 active tenants, and traffic is heavily skewed toward a handful of them. Give an exact single-process algorithm with its amortised per-request cost and its memory per tenant, then a bounded-memory approximation and the worst-case overshoot it actually admits. Say what the distributed version does when the counter store is unreachable.
Approach
- Exact, single process: a per-tenant deque of request timestamps. On arrival, pop from the front while
front <= now - 60s, then admit if the remaining length is below R and push. Each timestamp is pushed once and popped once, so the cost is O(1) amortised. The O(R) version is the one that re-filters the whole deque on every request. - Quote the memory. R = 1,000 across 200,000 active tenants is up to 2 x 10^8 timestamps at 8 bytes, about 1.6 GB, and that is the worst case rather than the mean, because the long tail of small tenants holds almost nothing. Skew helps you here and hurts you in the sharding decision.
- Bounded alternative, with its real bound stated: a fixed 60-second counter is O(1) memory but admits close to 2R across a 60-second span straddling a boundary. The weighted two-bucket estimate,
prev * (60 - elapsed)/60 + cur, is better on smooth traffic but assumes the previous window's arrivals were uniform; an adversary packing them at the end of that window is undercounted and can still approach 2R. Say that rather than calling it exact. - Token bucket is the usual gateway answer and a different contract: O(1) state per tenant (
tokens,last_refill), a sustained rate, and a deliberate burst allowance equal to the bucket size. Choose it when a burst is acceptable and the log when the limit is contractual. - Distributed: the limit is per tenant in aggregate, so a local bucket of R/N per pod is wrong in both directions under skew. A tenant landing on one pod is throttled at R/N, and a tenant spread evenly across pods exceeds R. The shared check must be a single atomic round trip, one script or one increment-and-compare, never read-then-write, and it must fit inside the 10 ms p99 budget.
- Decide the unavailable case in advance and write it down. Failing open keeps the product up and lets a tenant exceed its limit for the duration; failing closed converts a counter-store outage into a full outage. Most gateways fail open on rate limits and closed on authorisation, and those are two separate decisions made separately.
Worked solution 25 min
- Implement the deque version and instrument the per-request pop count, then confirm total pops equal total pushes over a run.
- Generate a burst that places R requests in the last 100 ms of one minute and R more in the first 100 ms of the next.
- Run that burst through the exact deque, a fixed 60-second counter, and the weighted two-bucket estimate, recording admissions in the trailing 60 seconds at every instant.
- Size the memory as R x active tenants x 8 bytes at R = 1,000 and 200,000 tenants, and compare it against what a token bucket would need.
Follow-up
- One tenant sends 40% of all traffic. What does that do to a single counter key, and what do you shard on instead?
- Quotas rather than rate limits: the check is
select used; if used < limit then insert. Name the isolation level that still permits the overshoot, and the two fixes. - How do you return an accurate
Retry-Afterfrom the exact algorithm without a second scan?
Explain why the metering dashboard scans every daily partition
usage_event is range-partitioned daily on ingested_at and holds tenant_id, workspace_id, environment, sku, quantity numeric(20,6), occurred_at and ingested_at. The only relevant index is on (occurred_at). A dashboard runs select sku, sum(quantity) from usage_event where tenant_id = $1 and date_trunc('hour', occurred_at) >= $2 and environment = 'production' group by sku, and EXPLAIN shows a sequential scan of every partition. Give each distinct reason, rewrite the predicate so an index can serve it, propose the index, and state the write cost its column order adds.
Approach
- Separate the three causes rather than blaming one. First,
date_trunc('hour', occurred_at)wraps the column, so the predicate is not sargable against a btree on the bare column. Second, pruning keys off ingested_at while the query constrains occurred_at, so no partition can be excluded. Third, even made sargable, (occurred_at) is not tenant-leading, so for one tenant among thousands the scan reads the whole time range and discards nearly all of it. - Rewrite the bound carefully, because the obvious rewrite is only conditionally equivalent.
date_trunc('hour', x) >= $2equalsx >= $2only when $2 is already hour-aligned; for an arbitrary $2 it meansx >= date_trunc('hour', $2) + interval '1 hour'. Normalise the parameter in the caller and leave the column bare. - Restore pruning with a second, redundant predicate on the partition key:
ingested_at >= $2 - interval '<late-data horizon>'. State both sides of it. It prunes to a handful of partitions, and it silently omits any event whose ingest lagged past that horizon, which is precisely what a producer replay produces. Either document the horizon as a stated bound, or partition on occurred_at and move the problem into the dedup window instead. - Propose
(tenant_id, occurred_at) include (sku, quantity)per partition. A partial indexwhere environment = 'production'mostly saves size rather than selectivity, since production dominates the three environments; take it if non-production is a meaningful share and skip it otherwise. - Price the write path honestly. At roughly 250M rows/day each extra index is another insert plus WAL per row, and a tenant-leading key scatters inserts across one hot leaf per active tenant instead of appending to a single rightmost leaf, so page dirtying and random I/O both rise. An INCLUDE payload widens every leaf entry and enlarges the index accordingly.
- Add the index-only-scan caveat before someone reports it as a regression: on a freshly appended table the visibility map is not yet set for recent pages, so the INCLUDE columns still cost heap fetches until autovacuum has been through, and the newest hour is exactly the data the dashboard reads.
Worked solution 30 min
- Build 30 daily partitions with skewed tenants, one holding about 40% of the rows, then ANALYZE.
- Run
explain (analyze, buffers)on the original query and record how many partitions were scanned and the rows removed by filter. - Apply the rewritten predicate and the index, re-run, and confirm the plan lists only the partitions inside the ingested_at bound.
- Re-run with $2 set to a non-hour-aligned timestamp and confirm the rewritten and original predicates return identical rows.
- Insert an event with ingested_at six hours past occurred_at and check whether the pruning predicate excludes it.
Follow-up
- CREATE INDEX CONCURRENTLY is not supported on a partitioned parent. Give the sequence that gets this index onto 400 existing partitions without blocking ingest.
- One tenant holds 200 times the median row count and the dashboard still times out for them with the index in place. What changes?
- Should this read hit
usage_rollup_hourlyinstead? State what that costs in freshness and what the watermark lets you promise.
Decide which facts an invoice line copies instead of joining
invoice_line_item already denormalises tenant_id, which is reachable through invoice_id, and stores amount_minor even though quantity times unit_price_micros would recompute it. A reviewer asks you to normalise both away, and separately asks whether the tenant's legal name and billing address should be copied onto the invoice header. Decide each case. For every field you keep denormalised, name the read pattern or the invariant that justifies it, the anomaly the copy can develop, and the mechanism that prevents that anomaly here.
Approach
- Split the question into two kinds of copy, because they fail differently. A copy of a currently mutable fact is a cache: it drifts and needs invalidation. A copy of a fact frozen at write time is not a cache at all, it is the record of what happened, and normalising it away destroys information the source no longer holds.
- Keep tenant_id on the line. It costs 8 bytes, it leads every index on the table so no read is ever accidentally cross-tenant, and it turns a wrong join into an empty result rather than another tenant's money. Prevent the drift structurally: a unique constraint on invoice (invoice_id, tenant_id) plus a composite foreign key from the line on (invoice_id, tenant_id) makes a mismatched pair impossible, so the database enforces agreement instead of a code review.
- Keep amount_minor. Rounding must happen exactly once, at a named site, with a stated mode (half-even here). If readers recompute from quantity and unit_price_micros, every reader owns a rounding decision, and half-up and half-even diverge systematically across thousands of lines rather than cancelling out. A check constraint can bound the stored value but deliberately cannot re-derive it.
- Copy the legal name and billing address onto the invoice header, written once and never updated. The statement must show what was true when it was sealed, and the tenant record will change afterwards. This is a snapshot for the same reason
source_rollup_watermarkis stored per line: without it, nobody can reconstruct what the customer was told. - Name the read pattern that pays for all of it. Rendering, dispute response and export are per-tenant, per-period reads over thousands of lines that would otherwise join back to slowly changing dimensions that no longer hold the historical value. The write side is a once-per-period batch, so the extra columns cost nothing that matters.
- Concede the case where the reviewer is right: a mutable operational attribute such as the tenant's current plan name has no business on a line. If a report wants it, join. If a statement needs the plan as of the period, that is another snapshot and it belongs on the header with the rest.
Follow-up
- Write the composite foreign key and the unique constraint it requires on the parent. What does it cost on every line insert, and what does it do to a bulk load?
- A tenant is renamed after being invoiced. Which rows change, and what does the customer see on last quarter's PDF?
- Where does currency live, and what breaks if a tenant's billing currency changes between two periods?
Explain Object Oriented Concepts.
Explain Object Oriented Concepts.
Approach
- Say what you would check first and why it is the highest-information step.
- State your assumptions explicitly before working the problem.
- Clarify what is being asked and what a complete answer contains.
Follow-up
- How would you know your answer was wrong?
- What assumption would you test first?
Program to merge two files.
Program to merge two files.
Approach
- Work from the requirement backwards to the design.
- State your assumptions explicitly before working the problem.
- Say what you would check first and why it is the highest-information step.
Follow-up
- What assumption would you test first?
- How would you know your answer was wrong?
Describe front-end technologies you are most proficient in.
Describe front-end technologies you are most proficient in.
Approach
- State your assumptions explicitly before working the problem.
- Clarify what is being asked and what a complete answer contains.
- Say what you would check first and why it is the highest-information step.
Follow-up
- What assumption would you test first?
- How would you know your answer was wrong?
Make run creation safe when the client times out and retries
POST /v1/runs inserts a job_run row and dispatches a sandbox. The caller is a customer's CI pipeline with a 10-second timeout and three automatic retries. A run that takes 12 seconds to start returns after the client has already given up, so the retry starts a second sandbox and bills it. Redesign the endpoint: the key the client sends, its scope and storage, what happens when the same key arrives with a different body, what happens when a retry arrives while the first request is still in flight, and how long the key stays honoured.
Approach
- Name the defect before designing: the client's timeout is an unknown outcome, and the naive shape gives it no way to ask whether the earlier call landed, so its only choices are to duplicate the run or to drop it.
- Require an
Idempotency-Keyheader scoped to (tenant_id, key) rather than to the credential, so a rotated or replaced credential still replays. Store the key with a request fingerprint, SHA-256 over method, path and the canonicalised body, plus state, the stored response status and body, and the resulting run_id. - Make the claim a write rather than a read: insert the key row inside the same transaction as the run under
unique (tenant_id, idempotency_key). The loser of a concurrent race takes a unique violation and then reads the winner's row, which is what makes the duplicate case deterministic instead of timing-dependent. - Define three outcomes precisely. Same key, same fingerprint, completed: replay the stored response with a header marking it a replay. Same key, different fingerprint: 422 with an
idempotency_key_reusecode, never the stored response. Same key still in flight: 409 with Retry-After, because blocking the second caller holds a connection for the duration of someone else's request. - Close the dispatch gap with an outbox row committed alongside the run and a relay that enqueues it. Commit-then-publish loses the dispatch if the process dies in between; publish-then-commit hands a worker a run_id that does not exist yet.
- Set retention from the client, not from storage cost: the key must outlive the caller's worst-case total retry window, so publish a number such as 24 hours and state that a key reused after expiry legitimately creates a second run.
Worked solution 30 min
- Draw the timeline of the failing case: commit at t=11s, client abandons at t=10s, retry at t=10.1s, and mark where the second sandbox starts.
- Write the idempotency table DDL with the unique constraint and the fingerprint column, then the single transaction that inserts both rows.
- Enumerate the four arrival cases (first, replay, conflicting body, in-flight) and write the exact status, headers and body for each.
- Add the outbox row to the same transaction and describe the relay's at-least-once behaviour and why the worker must tolerate a duplicate dispatch.
- State the retention horizon and the sentence that goes in the public docs about key reuse after expiry.
Follow-up
- The SDK generates a fresh key on every attempt rather than reusing one. What in your response surface makes that visible instead of silently doubling the bill?
- How does this interact with job_run.parent_run_id: is an automatic retry of a failed run the same object as a client retry of the request?
A rare job-run overwrite that logging makes disappear
About one job run in fifty thousand records billable_seconds matching no observed sandbox lifetime, and a few rows show worker_id changing after finished_at was already set. It does not reproduce: debug logging around the terminal write made it vanish for two weeks before it returned. Runs last from 200 ms to 30 minutes, the lease is 60 seconds and is renewed while a run executes. Give an ordered checklist, the mechanism, and a fix that makes the illegal write impossible rather than merely rarer.
Approach
- Mine the evidence instead of chasing a repro: select rows where updated_at is later than finished_at, or where a terminal status was written twice, and join them to attempt history to recover both writer identities. The defect has already happened tens of times and the rows are the recording.
- State the signature before measuring it. If the cause is a lease that expired while the original worker was stalled, affected runs should cluster where the gap between the last renewal and the terminal write exceeds the lease, and should correlate with worker pause metrics rather than with workload shape.
- Read the disappearance honestly. Logging inside the window changed the timing and lowered the probability; it is evidence about how narrow the window is, not a fix. Reproduce by widening the window on purpose, shortening the lease and injecting a pause between sandbox exit and the terminal write, rather than by adding more instrumentation.
- Name the mechanism precisely: the lease expires during a stall such as a long garbage-collection pause or a brief partition, the run is re-dispatched, and the original worker then wakes and writes its terminal state over the new attempt's row. A lease alone cannot stop this, because the check and the write are separated by the stall.
- Fix by fencing the write itself: UPDATE job_run SET status = $2, finished_at = $3, billable_seconds = $4 WHERE run_id = $1 AND status = 'running' AND lease_token = $5, with zero rows affected interpreted as having been fenced rather than as success. The token lives on the row so the store arbitrates, not the worker's memory.
- Keep the state machine honest: a retry inserts a new row pointing at parent_run_id rather than resetting the old one, and a run whose worker vanished terminates as lost with billable_seconds null, because recording failure asserts an outcome nobody observed and then bills and retries on that assertion.
Follow-up
- The supervisor also emits a usage event on completion. What does the fenced worker do about the event it already emitted, and how does metering absorb it?
- Lease renewal is itself a network call. What happens when a renewal times out, and how does the worker decide whether it still holds the lease?
- Why is lengthening the lease past the longest legitimate run the wrong lever, and what breaks if you do it anyway?
For a candidate senior enough that the loop turns on design and judgement rather than on whether the coding round gets finished. Five days build one system properly and then stress it; coding gets a single maintenance day, on the assumption that the risk at this level is an unexamined tradeoff rather than a missed algorithm.
Prepare, practise & reflect
One practical outcome each day. Spend longer where you need it.
0 / 7 done01Numbers before diagrams
- Build your own reference card of the figures you will re-derive all week: bytes for a realistic record, requests per second implied by a given daily active count, and the storage that a year at a given write rate produces. Derive each one rather than copying it, because the derivation is what survives a follow-up.
- Turn one product statement into capacity requirements. From ten million daily users at four writes and forty reads each, state the peak-to-average factor you are assuming and why, then produce peak write QPS, peak read QPS and a year of storage.
- Write the two numbers whose order of magnitude changes the design, the read-to-write ratio and the working-set size against memory per node, and state the threshold at which each one flips your answer.
Deliverable: A one-page numbers card and one worked capacity estimate with every assumption written down.
Practice prompt ↗Practice prompt ↗Worked solution ↗02One system, from requirements to schema
- Spend the first ten minutes producing only functional requirements, non-functional targets with numbers attached, a p99 latency, a durability expectation, a consistency requirement, and an explicit out-of-scope list.
- Define the interface before the boxes: the three or four endpoints, their parameters, what each returns, and which of them are idempotent.
- Write the data model, then write the single access pattern that justifies it, and state what the schema would have to become if the dominant access pattern were the other one.
Deliverable: One design carried to endpoint-and-schema depth, with non-functional targets expressed as numbers and a written out-of-scope list.
Practice prompt ↗Practice prompt ↗03The consistency you are actually buying
- Write out what a client sees under asynchronous replication when its write commits on the leader and its next read is served by a lagging follower, then write the two fixes, pinning that session's reads to the leader for a bounded window or carrying a version token the replica must reach, and the cost of each.
- Work the quorum arithmetic on paper for N of three with W and R of two, and separate what R + W > N does guarantee, that any read set intersects any write set, from what it does not: on its own it is not linearizability, and a sloppy quorum that accepts writes on nodes outside the preference list breaks even the intersection.
- Take two storage choices with different defaults, a single-leader relational store committing synchronously and a quorum-replicated store that converges eventually, and write the specific product behaviour that would be wrong under each, rather than a general statement about which is stronger.
Deliverable: A page separating what quorum overlap guarantees from what it does not, with one concrete product misbehaviour attached to each gap.
Practice prompt ↗Practice prompt ↗04Failure is the design
- For one write path, work through the case where the client times out after the server has already committed, then design the idempotency key: who generates it, how long it is retained, and what the duplicate request returns.
- Express the retry policy as parameters rather than as a word: maximum attempts, base delay, backoff factor, jitter, and which error classes are retried at all. Then state why retrying a non-idempotent write without a key is a correctness bug and not merely waste.
- Compute the fan-out effect on tail latency. If a request waits on ten backends and each independently exceeds its p99 one percent of the time, the chance at least one is slow is 1 - 0.99^10, about ten percent. Then write why independence is the optimistic assumption and what correlates them in practice.
- Name the backpressure mechanism for one queue or one dependency in the design, a bounded queue with shedding or a concurrency limit, and write what the caller is told when it engages.
Deliverable: One write path with an idempotency design, a parameterised retry policy, and a written tail-latency calculation with its assumption named.
Practice prompt ↗Practice prompt ↗Worked solution ↗05Scaling the hot path
- Choose cache-aside or write-through for one read path and write the staleness window each produces, then name the invalidation event and what the system does when that event is lost.
- Design against the stampede: either coalesce requests so only one recomputes a missing key, or refresh early with jittered expiry, and write why identical TTLs on keys populated in the same moment produce a synchronised expiry and a thundering herd.
- Shard one table by a key you choose, then answer the two questions that break the choice: which queries now require a scatter-gather, and what happens to the distribution when one tenant is a hundred times larger than the median.
- Write the cost of adding a node under plain modulo placement, where nearly every key moves, against consistent hashing, where roughly one key in n+1 moves, and state what virtual nodes are for.
Deliverable: A caching and sharding decision for one path, each with its failure mode and its rebalancing cost written beside it.
Practice prompt ↗Practice prompt ↗06Keep the coding hand in, at the bar that applies to you
- Solve one medium problem in thirty minutes, then spend twenty more making it production-shaped: named invariants, validation at the boundary, and errors that distinguish a caller mistake from an internal fault.
- Write the tests you would require of a colleague's version of that function: one for empty input, one for the boundary, and one for the case the implementation is most likely to get wrong.
- Read a piece of your own code from six months ago and write the change you would ask for, phrased as you would actually phrase it in review.
Deliverable: One problem hardened to review standard, with its test list and one written review comment.
Practice prompt ↗Practice prompt ↗07Defend it while being interrupted
- Run a forty-five-minute design mock with an interviewer briefed to change a requirement halfway, a tenfold traffic increase or a new strict consistency requirement, and to push on one number you estimated.
- Rehearse the two sentences a senior loop is listening for: naming the tradeoff you are choosing against and why, and saying what you would measure to learn that the choice was wrong.
- Prepare the design you regret: a real decision, the constraint that produced it, what it cost, and what you changed afterwards.
Deliverable: Mock notes recording how the design changed under the new requirement, plus a written account of one regretted decision.
Practice prompt ↗Worked solution ↗Expand any day for tasks and deliverables. Your progress is saved on this device.
A slipped date is only a bad story if you sat on it. What matters is what you believed when you gave the number, the signal that told you it was wrong, how many days passed before you said so, and what you cut rather than asking for more time. Scope you defended counts as much as scope you dropped.
How do you handle npm package management and installation?
How do you handle npm package management and installation?
Approach
- Name the disagreement and how you resolved it with evidence.
- Close with what you would do differently, concretely.
- Give the blast radius: what could have broken, and what you measured.
Follow-up
- What did you decide not to do, and why?
- What would you do differently if you ran that again?
Own the incident where invoices undercounted metered usage
A metering consumer acknowledged each batch before committing the fold into usage_rollup_hourly. A rolling deploy restarted consumers mid-batch for two hours; roughly 1.4M usage_event rows were acknowledged and never folded, and 61 invoices sealed against the resulting rollups before anyone noticed. Take the owner's role. Describe an incident of comparable blast radius you owned: how it surfaced, the query that sized the loss, what you stopped first, and how the money was corrected. Give a wall-clock timeline and one thing you got wrong while it was still live.
Approach
- Open with the invariant that broke and the direction of the error, because they determine everything else: acknowledging before committing makes the consumer at-most-once, so this loses events rather than duplicating them, and loss raises no error anywhere. A listener who hears 'we lost revenue silently' knows immediately why detection took two hours.
- Size it with a stated reconciliation rather than an adjective: sum(quantity) from usage_event grouped by (tenant_id, sku, hour of occurred_at) over the window, against usage_rollup_hourly.quantity_sum on the same keys, filtered to environment='production' because staging and sandbox are metered but not billed. Then bisect by hour and tenant until single cells explain the gap. Say how long that ran and whether a replica could serve it while the incident was live.
- Separate mitigation from fix and say which came first. Mitigation is holding the sealing job, because a sealed row is frozen by design and every minute of sealing converts a recoverable rollup into an invoice correction. The fix is moving the acknowledgement after the commit, which re-introduces duplicates that the dedup check on (tenant_id, idempotency_key) must now absorb.
- State the correction path in the domain's own terms: sealed periods are never edited, so each affected tenant gets an adjustment line on the next invoice with kind='adjustment' and voided_by_line_id pointing at the line it reverses, priced against the same rate tier and carrying the watermark it priced against. That is four separate numbers — tenants affected, minor units, the cycle the adjustment lands in, and when customers were told.
- Close on one prevention control with its cost, not five: a per-hour reconciliation comparing raw sum to rollup sum that pages above a threshold. Name the threshold and the false-page rate you accepted, because a detector nobody will keep staffed is not prevention.
- Name a mistake you made inside the response window — the wrong first hypothesis, a mitigation that made it worse — rather than a design mistake from six months earlier. That is the part candidates rehearse away and interviewers weight heavily.
Follow-up
- Your fix moves the acknowledgement after the commit. What breaks now, and what absorbs it?
- One undercharged tenant has since churned. Do you bill them, and who decides?
- How would you have caught this in ten minutes instead of two hours, and what would that detector cost you in pages per week?
Argue against failing open when the control plane is unreachable
The gateway caches credential-to-context decisions with a sixty-second TTL. A design proposal says that when control-plane reads fail, pods should keep serving from expired entries indefinitely so a control-plane outage never becomes a product outage. You believe that converts every revocation into an unbounded one. Describe a design you argued against while it was still a live proposal: what you measured or modelled to make the case, what you conceded, who decided, and what happened afterwards. Say what would have changed your mind before the decision, not after it.
Approach
- Reframe it from a values argument into a bounded-staleness argument. Both sides already accept the cache; the disagreement is only about the ceiling on how long a revoked credential keeps authorising. Put a number on the table — serve stale for up to fifteen minutes, then fail closed — and make the other side argue against a number rather than against a principle.
- Bring arithmetic rather than adjectives: the rate of revocations with revoked_reason in ('suspected_leak','auth_version_bump'), the observed distribution of control-plane unavailability, and the product of the two, which is expected requests served by revoked credentials per outage-hour. At 30k requests/second the unbounded version is not a subtle exposure and the number says so.
- Concede the strong half of the opposing case first, because that is what buys you the room: failing closed turns one service's outage into a total outage across three regions, and a control plane doing tens of writes per second is not engineered to the gateway's availability target. A proposal you have not steelmanned reads as reflex.
- Propose the asymmetry that usually resolves this: stale entitlements cost bounded money (a quota fifteen minutes out of date over-serves by a computable amount), while a stale revocation costs unbounded access. Split the cached decision by what it authorises, give the two halves different staleness ceilings, and let the entitlement half fail open while the revocation half fails closed.
- State the propagation dependency plainly, since it is the part that is missed: validity is also derived from the principal's auth_version, so password reset and sign-out-everywhere flow through this same cache. A design that bounds staleness for explicit revocation and not for auth_version bumps has only fixed half of it.
- Say who decided, and what you did afterwards in either outcome: write the decision down with its number and a review date, and instrument the exposure you were worried about so the next round of the argument is settled by data instead of by seniority.
Follow-up
- Publish-subscribe invalidation is lossy under a partition, and a TTL is the only hard bound. What TTL do you pick, and what does it cost you at 30k requests/second?
- The key was revoked because it was found in a public repository. Does your answer change, and where does that urgency live in the design?
- You lost the argument and six weeks later the failure you predicted happens. What do you say in the review, and what do you not say?
- 01
How do you handle npm package management and installation?
- 02
A metering consumer acknowledged each batch before committing the fold into usage_rollup_hourly. A rolling deploy restarted consumers mid-batch for two hours; roughly 1.4M usage_event rows were acknowledged and never folded, and 61 invoices sealed against the resulting rollups before anyone noticed. Take the owner's role. Describe an incident of comparable blast radius you owned: how it surfaced, the query that sized the loss, what you stopped first, and how the money was corrected. Give a wall-clock timeline and one thing you got wrong while it was still live.
- 03
The gateway caches credential-to-context decisions with a sixty-second TTL. A design proposal says that when control-plane reads fail, pods should keep serving from expired entries indefinitely so a control-plane outage never becomes a product outage. You believe that converts every revocation into an unbounded one. Describe a design you argued against while it was still a live proposal: what you measured or modelled to make the case, what you conceded, who decided, and what happened afterwards. Say what would have changed your mind before the decision, not after it.
Is this an official Spericorn Technology interview guide?
No. It is PracHub's own research and practice material for the Software Engineer role at Spericorn Technology. Rounds and questions reflect what candidates have reported, not a process Spericorn Technology has published, and they change over time. Confirm the current format and scope with your recruiter.
PracHub interview research ↗How long does the entire interview process usually take?
The process is often quite fast, typically ranging from a few days to two weeks.
PracHub interview research ↗What is the best way to handle technical questions I don't know the answer to?
Be honest about the gap in your knowledge, but pivot to how you would go about finding the answer or explain the related concepts you do understand.
PracHub interview research ↗Does Spericorn Technology conduct remote interviews?
Yes, depending on the role and location, the process often includes a mix of telephonic, video, and in-person interviews.
PracHub interview research ↗What differentiates a successful candidate from others?
Successful candidates demonstrate a mix of technical competency and the professional maturity to handle projects independently.
PracHub interview research ↗Sources & methodology 3 sources ↗
No official company page is cited. Rounds and questions come from candidate reports and PracHub editorial material; each source shows the date it was read.
- 01PracHub interview research ↗
PracHub editorial research into this company and role, maintained with this guide. Candidate-reported, not an employer publication.
PracHub page · Accessed 2026-09-22 - 02PracHub Software Engineer practice ↗
Cross-company practice questions for this role.
PracHub page · Accessed 2026-09-22 - 03PracHub interview preparation framework ↗
The framework the preparation plan follows.
PracHub page · Accessed 2026-09-22
Explore related engineering environments and compare the preparation focus.
Vercel Software Engineer Interview Guide
Debugging practice for Vercel software engineer prep built on a reproduction you trust, narrowing to the smallest failing input, and changing one variable per run so the result stays attributable.
Mistral AI Software Engineer Interview Guide
Testing exercises for Mistral AI software engineer prep: choosing boundary cases over repetition, isolating tests from shared clock and ordering, and treating an intermittent failure as a defect rather than noise.
Figma Software Engineer Interview Guide
Testing exercises for Figma software engineer prep: choosing boundary cases over repetition, isolating tests from shared clock and ordering, and treating an intermittent failure as a defect rather than noise.
Cohere Software Engineer Interview Guide
Testing exercises for Cohere software engineer prep: choosing boundary cases over repetition, isolating tests from shared clock and ordering, and treating an intermittent failure as a defect rather than noise.