As a Data Scientist at Strategic Research Insights, you are tasked with transforming complex data into actionable insights that drive strategic decisions. This role is vital to the organization, as it directly influences product development, enhances user experience, and ultimately contributes to the company's growth and market position. You will use statistical techniques, machine learning algorithms, and data visualization tools to generate insights that help shape the future of the company's products and services.
In this role, you will work on diverse datasets, collaborating with cross-functional teams to solve real-world problems that affect the company's users. You may find yourself engaged in projects ranging from understanding user behavior patterns to optimizing algorithms for product features. The complexity and scale of the data you handle will require critical thinking and innovative problem-solving skills, making your contributions not only significant but also intellectually stimulating.
HR Round
reportedBehavioural answers from data candidates get audited in a way that answers from other roles do not. When you say a model lifted retention, the next question is the denominator, the window, and how you knew the lift was not seasonal. So attach the measurement to each claim while you tell it: what the metric was before, over what period, and against what comparison. Numbers with no baseline read as rounded-up memory, and one unsupported figure tends to make the rest of the story sound rehearsed.
What to demonstrate
- Whether each impact number arrives with a baseline, a window and a comparison, or as a bare percentage
- Whether you can name the method that attributed the effect to your work (an experiment, a staged rollout, a seasonal control) or concede the link was correlational
- Whether the magnitudes stay internally consistent when the interviewer multiplies them against the scale you described earlier
How to prepare
- For each story, write the impact line as metric, value before, value after, window, and how attribution was established. Any line missing two of those five is a follow-up you will answer badly.
- Re-derive one headline number from the source table rather than the deck that reported it. Resume numbers drift upward across retellings.
- Decide in advance which figures you cannot share, and prepare the ratio or relative change you can give instead, so a confidentiality limit does not read as evasion.
Technical Assessments
reportedA handful of shapes account for most of what gets asked in this format: a ranking or deduplication inside groups, a running or rolling total, a period-over-period comparison, and a cohort tracked forward over time. Recognising the shape quickly is most of the speed here; deriving it from scratch while a clock runs is where the time goes. Know that a window function keeps every row while a GROUP BY collapses them, and know which one the question needs. If the exercise is in Python instead of SQL, the same shapes arrive as groupby with transform, shift and merge, and the same grain mistakes are available.
What to demonstrate
- Whether you reach the right construct without a detour, such as ROW_NUMBER over a partition to deduplicate instead of a self-join against a MAX subquery
- Whether you know what your window frame actually is, since adding ORDER BY inside OVER changes the default frame and silently changes a running total
- Whether the thing runs. A near-miss that throws an error scores below a plainer query that returns the right rows.
How to prepare
- Write each of the four shapes once from memory against a small schema and keep the working version somewhere you will reread it: dedupe with ROW_NUMBER, a running total, a month-over-month change with LAG, and a retention table
- Compute one running total twice on data with tied timestamps, once on the default frame and once with ROWS BETWEEN UNBOUNDED PRECEDING AND CURRENT ROW, and look at where the two disagree
- If Python is on the table, rebuild the dedupe and the running total with groupby and cumsum, then assert the two implementations return identical rows
Additional Technical Interviews
reportedBefore anything else, this round is a reading test. You are given a small schema and a question phrased in business language, and most of the difficulty sits in the gap between them. Who counts as an active user, does a refunded order still count as an order, is that date column an event time or a load time. Weak answers start typing immediately and compute something precise about the wrong population. Strong ones pin the definition in one sentence, name the column that encodes it, then write the query. On a timed assessment with nobody to tell, write the definition in a comment anyway.
What to demonstrate
- Whether an ambiguous term becomes a specific column and filter before any computation happens
- Whether you read the schema for keys and cardinality rather than only for column names
- Whether the result answers the question at the grain it was asked at, per user or per session or per day
How to prepare
- Take three metrics you already use and write down the exact filter and exact grain behind each, then practise stating one of them in a single sentence out loud
- On a schema you have never seen, spend the first minute writing what one row of each table means and which key it is unique on, then predict which joins can duplicate rows
- Rehearse a version where the definition changes halfway through, and edit the query you have instead of starting over
Final HR Round
reportedRounds of this kind usually include one question about work that did not go well, and it is the part that carries the most information. Anyone can narrate a shipped win. What the interviewer learns from a project that stalled is how you behave without a result to hide behind: whether you noticed the problem yourself, how long it took, and who you told. Answers that route the failure onto a data pipeline or a reorganisation close the topic without answering it, and the follow-up comes back to your own part.
What to demonstrate
- Whether you found the error yourself or someone else found it, and how long it sat before anyone knew
- What you changed afterwards, stated as a check you now run rather than a lesson you now believe
- Whether the mistake you choose has real cost attached, such as a quarter of misdirected roadmap or a metric that was reported upward, instead of one that flatters you
How to prepare
- Choose a failure you caught yourself and be ready to say what tipped you off. A story where someone else caught it is still usable, but you will be asked why you missed it.
- Write down the check you added afterwards and where it lives now, so the correction is a concrete artefact rather than a resolution.
- Rehearse saying the cost out loud. Candidates shrink the number by instinct once the interviewer is in the room.
PracHub editorial advice for the preparation topics above.
Counting authorizations instead of weighting them, and summing amounts across currencies
Declines skew toward high-value, cross-border and card-not-present transactions, so an unweighted approval rate can sit flat while approved value falls. Merchant retry logic also turns one declined purchase into several rows, inflating the denominator by an amount that varies by merchant and by decline reason. Amounts are held in the minor unit of the transaction currency and that unit is not always two decimals, since some currencies have none and some have three, so summing amount_minor across currencies produces a figure with no interpretation at all.
Using written premium as the denominator of a loss ratio
Premium is written at inception and earned pro rata across the exposure period, so in a growing book written premium runs ahead of earned premium and the loss ratio comes out too low, with the error reversing when the book shrinks. The numerator has the mirror-image problem if it omits incurred-but-not-reported reserves, since recent accident periods then look profitable twice over. Both sides must refer to the same exposure period, which is what an accident-period view at a fixed development age enforces.
Generalising beyond the population the sample actually supports
State the frame the sample was drawn from and where it diverges from the population you want to talk about: time window, platform, geography, opt-in. If a group is excluded from the frame, either weight to known margins or narrow the claim rather than quietly extending it.
Reaching for a model before the target metric exists
Before naming an algorithm, write down the label, the prediction time, and the action that changes when the score crosses a threshold. If you cannot say what decision the output drives, any modelling choice is guesswork dressed up as method.
Choose a category, try a prompt, then open its approach, worked solution or follow-up when you need it.
Given a dataset, how would you implement a decision tree classifier?
Given a dataset, how would you implement a decision tree classifier?
Approach
- Pick an evaluation metric that matches the cost of each error type, not a default.
- Say how the offline result would be validated online before it is trusted.
- Set a baseline first, so any model has something honest to beat.
Follow-up
- What would you monitor after launch to know the model is still valid?
- How would you choose the decision threshold, and who owns that choice?
Explain a machine learning algorithm you have used in the past and its…
Explain a machine learning algorithm you have used in the past and its effectiveness.
Approach
- Pick an evaluation metric that matches the cost of each error type, not a default.
- Set a baseline first, so any model has something honest to beat.
- Say how the offline result would be validated online before it is trusted.
Follow-up
- How would you choose the decision threshold, and who owns that choice?
- Where could label leakage enter this setup?
Bootstrap a fraud loss rate that clusters within merchant
You have a per-transaction frame with auth_id, merchant_id, settled_amount_reporting and net_loss_reporting, both already in one reporting currency. Most rows carry zero loss, a few carry large ones, and losses cluster within merchant. Using only numpy's random generator and no resampling helper from any library, write a bootstrap that returns a 95 percent interval for net fraud loss in basis points of settled volume, resampling merchants with replacement and taking all rows belonging to each drawn merchant. Also produce the naive row-level interval and state which you would report.
Approach
- State the estimator before writing it: total net loss divided by total settled volume, times 10,000. It is a ratio of sums, so each replicate recomputes both sums. Averaging per-transaction loss rates instead would weight a five-unit transaction like a five-thousand-unit one.
- Pre-aggregate loss and volume to merchant level once. For a ratio of sums, drawing merchants and taking all their rows is arithmetically identical to drawing merchant-level (loss_sum, volume_sum) pairs, so a replicate becomes one integer draw plus two vectorised sums rather than a groupby inside the loop.
- Draw B replicates of M merchant indices with replacement, where M is the observed merchant count, compute the ratio per replicate, and take the 2.5th and 97.5th percentiles. Say explicitly that this is a percentile interval and that BCa would correct the skew-induced bias if the decision is close.
- Repeat with independent row draws for the naive interval and compare widths on the same replicate count.
- Report the clustered interval. Rows within a merchant share an acceptance profile, a category code and a fraud exposure, so they are not independent, and the row-level interval understates variance by roughly the design effect.
Worked solution 30 min
- Compute the point estimate directly on the full data and keep it for comparison.
- Aggregate to merchant-level loss and volume arrays, record M, and set B to 2,000 with a seeded numpy Generator.
- In a vectorised loop, draw integer indices of shape (B, M), index both arrays, sum along axis 1, and take the ratio times 10,000.
- Repeat for the row-level version using the per-transaction arrays and N draws.
- Take the 2.5 and 97.5 percentiles of each replicate array and report both intervals alongside the point estimate.
Follow-up
- Your clustered interval is three times wider. How do you explain that to someone who wanted a tighter number?
- One merchant accounts for 40 percent of losses. What does that do to the interval, and what would you do about it?
- How does this change if the question is whether two months differ rather than what this month's rate is?
Write a Python function to calculate the mean and median of a list of …
Write a Python function to calculate the mean and median of a list of numbers.
Approach
- Say which table is the grain you start from, and join outward from it.
- Handle the rows that do not match: a LEFT JOIN with a NULL check is usually the question.
- State the window function and its partition and ordering out loud before writing it.
Follow-up
- How would you verify this result without re-running the same query?
- How does the query change if the join becomes one-to-many?
Collapse merchant retry chains before measuring authorization approval
Merchant retry logic turns one declined purchase into several rows in fct_payment_authorization. Collapse attempts into chains: inside a partition of (card_token_id, merchant_id, amount_minor), consecutive rows whose requested_at gap is 15 minutes or less belong to the same chain. Return one row per chain with chain_started_at, attempt_count, amount_minor, channel, and chain_outcome set to 'approved' when any attempt in the chain was approved. Then report a 7-day rolling dollar-weighted approval rate by channel over chains rather than attempts. Exclude is_reversal rows.
Approach
- In a CTE, take LAG(requested_at) OVER (PARTITION BY card_token_id, merchant_id, amount_minor ORDER BY requested_at) and set is_new_chain when the previous value is null or the gap exceeds 15 minutes.
- Turn the flag into a chain identifier with SUM(is_new_chain::int) OVER (same partition, same order, rows unbounded preceding to current row), which is the standard gaps-and-islands construction.
- Aggregate to one row per chain: MIN(requested_at), COUNT(*), and BOOL_OR(auth_result = 'approved') as the chain outcome, because the purchase succeeded if any attempt in the chain did.
- Roll the chains to a daily grain per channel, then apply the rolling window as PARTITION BY channel ORDER BY chain_date RANGE BETWEEN INTERVAL '6 days' PRECEDING AND CURRENT ROW. An interval-offset RANGE frame is value-based: it admits every row in the partition whose chain_date falls in the closed window [D - 6 days, D], so a channel with no chains on some dates still gets the right seven-day sums — sparsity is exactly what this construct tolerates. ROWS BETWEEN 6 PRECEDING AND CURRENT ROW is the one that needs a dense grain, because it counts rows and on a sparse grain reaches back further than seven days.
- Left-join a dense date spine only if the output needs a row on days with no chains. That is a presentation requirement, not a correctness one, and it leaves every rolling sum unchanged. The RANGE frame's preconditions are that chain_date is a date or timestamp (an interval offset needs an ordering column it can be added to) and that the aggregation left one row per (channel, chain_date).
- Divide approved chain value by total chain value inside the rolling frame, never the average of daily rates, since averaging rates weights a quiet day the same as a heavy one.
Worked solution 40 min
- CTE 1: filter out is_reversal rows, then compute prev_requested_at with LAG and the is_new_chain flag.
- CTE 2: build chain_id with a running SUM of the flag over the same partition and order.
- CTE 3: group by partition keys plus chain_id to emit chain_started_at, attempt_count, amount_minor, channel and chain_outcome.
- CTE 4: aggregate chains to (chain_date, channel) with approved value and total value. Add the date spine here only if the report must show empty days.
- Final SELECT: two rolling SUMs over PARTITION BY channel ORDER BY chain_date RANGE BETWEEN INTERVAL '6 days' PRECEDING AND CURRENT ROW, divided at the end.
Follow-up
- This definition chains off the previous attempt, so a chain can span an hour if attempts arrive every 14 minutes. When is that right, and when would you anchor the window to the first attempt instead?
- Two genuine purchases of the same amount at the same merchant, four minutes apart, collapse into one chain. How large is that error and how would you bound it?
- A channel goes dark for three days mid-window. Which of the two frame types would silently widen, and what would the resulting rate look like?
- What changes if the merchant retries with a slightly different amount to dodge a velocity rule?
How would you optimize code for performance when dealing with large da…
How would you optimize code for performance when dealing with large datasets?
Approach
- Name one primary metric, then the guardrail that stops it being gamed.
- Restate the decision this analysis has to support, and who acts on the answer.
- Fix the population and the time window before naming any metric.
Follow-up
- Which segment would you cut first, and what would that rule out?
- How would you detect that the metric is being gamed rather than genuinely improving?
How would you approach a project aimed at improving user retention for…
How would you approach a project aimed at improving user retention for a product?
Approach
- Decompose the metric into the rates that drive it, and say which one you would check first.
- State what result would change your recommendation, so the answer is falsifiable.
- Name one primary metric, then the guardrail that stops it being gamed.
Follow-up
- What would you do if the primary metric and the guardrail moved in opposite directions?
- Which segment would you cut first, and what would that rule out?
If given a dataset with several variables, how would you determine whi…
If given a dataset with several variables, how would you determine which variables are most significant?
Approach
- Fix the population and the time window before naming any metric.
- Name one primary metric, then the guardrail that stops it being gamed.
- State what result would change your recommendation, so the answer is falsifiable.
Follow-up
- Which segment would you cut first, and what would that rule out?
- How would you detect that the metric is being gamed rather than genuinely improving?
How do you prioritize tasks when working on multiple projects simultan…
How do you prioritize tasks when working on multiple projects simultaneously?
Approach
- State what result would change your recommendation, so the answer is falsifiable.
- Fix the population and the time window before naming any metric.
- Name one primary metric, then the guardrail that stops it being gamed.
Follow-up
- What would you do if the primary metric and the guardrail moved in opposite directions?
- How would you detect that the metric is being gamed rather than genuinely improving?
Describe how you would design an experiment to test a new feature in a…
Describe how you would design an experiment to test a new feature in a product.
Approach
- Say whether units interfere with each other, and switch design if they do.
- State the primary metric and the minimum effect worth shipping, then size the test.
- Decide the analysis before seeing data, including how long it runs and when you look.
Follow-up
- How would you handle interference between treated and control units?
- What would you conclude if the result is positive but the test is underpowered?
Test a referral rule when reviewers are a shared queue
A proposed risk rule raises the share of ecommerce authorizations routed to manual review. Reviewers work a shared pool of queues serving both arms, so extra referrals from treatment lengthen the wait for control cases too. The current plan randomises by customer_id and reads decision latency plus matured fraud basis points. Explain why that design is biased and in which direction, propose a design that is not, and say what governs its power.
Approach
- Name the violated assumption precisely: a unit's outcome depends on other units' assignments through the shared reviewer capacity, so the stable unit treatment value assumption fails. Customer-level randomisation then estimates a contrast between a degraded treatment and a degraded control, not between treatment and the status quo.
- State the direction. Treatment pushes work into the shared queue, control absorbs part of that wait, so the measured latency difference understates the true effect of full rollout. The test can look acceptable while the rolled-out state is materially worse, which is the expensive failure mode here.
- Move randomisation up to a unit that contains the interference. Either cluster-randomise whole queues or sites, or run a switchback that flips the rule for an entire queue over time blocks. Switchback is usually the better choice here because queue count is small and each queue serves as its own control, removing between-queue heterogeneity.
- Specify the switchback concretely. Block length should be several times the queue sojourn time; discard a burn-in after each switch equal to the 95th percentile sojourn so carryover cases from the previous regime do not contaminate the new block; balance assignment within each day so the daily arrival pattern cannot correlate with arm.
- Analyse at the randomisation unit. Aggregate to queue-block means, include queue and time-block fixed effects, and use randomisation inference or a wild cluster bootstrap rather than cluster-robust standard errors, which are anti-conservative with few clusters. Check residual autocorrelation between adjacent blocks; if it is material, widen the blocks or model it.
- Separate the two readouts by maturity. Latency and referral precision at case close are available inside the test window; matured fraud basis points require at least 120 days of dispute maturity from the transaction month, so it is a deferred confirmatory read and must not be presented as a low number on immature cohorts.
Worked solution 30 min
- Write the interference channel explicitly: reviewer capacity is fixed per queue per hour, arrivals are the sum of both arms, so control's wait is a function of treatment's assignment.
- Choose a queue-by-four-hour-block switchback across 14 queues for 30 days, giving 14 * 6 * 30 = 2,520 blocks, with within-day balanced assignment and a burn-in equal to the 95th percentile sojourn discarded at each switch.
- Compute power at the block level. With a residual block-level standard deviation of decision latency of 6 minutes after removing queue and day-of-week fixed effects, and half the blocks per arm, MDE = 2.8016 * sqrt(2 * 36 / 1260).
- State the caveat that adjacent blocks are autocorrelated, so the effective block count is below 2,520 and the analytic MDE is a floor; estimate the inflation from historical block-to-block autocorrelation before committing.
- Split the readout: latency and referral precision as the in-window primary, matured fraud basis points as a deferred read at 120 days with immature months marked incomplete rather than plotted.
Follow-up
- How do you set the block length when the queue sojourn time itself changes under treatment?
- You have 14 queues and 30 days. Compare a queue-level cluster design against a queue-day switchback on power and on what each can estimate.
- The shared resource is capacity. What happens to your estimate if reviewers work faster when the queue is long?
Approval rate fell but approved value did not
Over ten days the count-weighted 7-day approval rate on fct_payment_authorization fell from 91 to 86 percent, while captured value in the reporting currency is flat. Available columns: auth_id, card_token_id, merchant_id, mcc, channel, requested_at, amount_minor, transaction_currency, auth_result, decline_reason_code, risk_score, is_reversal, parent_auth_id, captured_at, captured_amount_minor, issuer_country. In twenty minutes, decide whether approved value is actually at risk, and hand back a corrected rate together with its denominator and every exclusion written down.
Approach
- Restate the denominator before querying anything. The current one counts every row, so reversals (is_reversal = true), incremental authorizations (parent_auth_id not null) and zero-amount verification attempts (amount_minor = 0) are all sitting in it.
- Chart numerator and denominator separately by day. If approved counts are flat and total attempts rose, the rate moved because the denominator grew, which is a different investigation from a rule change and points at a different owner.
- Group declines by decline_reason_code and merchant_id. Retry-driven inflation concentrates in a few soft decline codes at a few merchants; a genuine policy change spreads across merchants within one code family.
- Collapse retry chains: partition by (card_token_id, merchant_id, amount_minor), keep one attempt per 15-minute window taking the best outcome, and recompute both count-weighted and dollar-weighted rates on the collapsed set.
- Convert amount_minor to one reporting currency using each currency's ISO 4217 exponent before any dollar weighting, then cut by channel and issuer_country to confirm nothing is hiding underneath a flat total.
- Report both rates side by side with the exclusion list attached, and state which definition the alert should have been built on.
Follow-up
- How would you pick the retry-collapsing window when merchants retry on different schedules?
- Flat captured value could itself be hiding a mix shift. How do you rule that out?
- What monitor would have caught denominator inflation on the day it started, rather than ten days later?
Instead of guessing where the week should go, day one measures it under a fixed rubric and allocates the remaining hours in proportion to the gaps. The method is deliberately rigid: the allocation is written down before any studying starts and is not renegotiated when a topic turns out to be unpleasant.
Prepare, practise & reflect
One practical outcome each day. Spend longer where you need it.
0 / 7 done01Diagnostic, scored before you study anything
- Sit a 100-minute timed diagnostic in four blocks: 30 minutes of SQL across three prompts, 25 minutes of short-answer statistics, 25 minutes on one modelling or case prompt, and 20 minutes delivering one behavioural story aloud.
- Score each block from 0 to 3 on a fixed rubric where 3 is correct and fluent, 2 is correct but slow or prompted, 1 is partially correct, and 0 is stuck, grading the output rather than how the attempt felt.
- Allocate the hours for days two to five roughly in proportion to 3 minus the score in each block, write the allocation down, and commit to not revising it midweek.
Deliverable: A scored rubric and a fixed hour allocation for the rest of the week.
Practice prompt ↗Practice prompt ↗Practice prompt ↗Worked solution ↗02Largest gap: find the boundary rather than the subject
- Break the weakest area into five named sub-skills (for query work: grain control, window frames, date arithmetic, set logic with NULLs, and reading a query plan) and rate each one, so the rest of the week targets a sub-skill instead of a subject.
- Solve three problems chosen to sit just above where the rating drops off, and for each write the first move you failed to make.
- Re-solve one of them from memory four hours later, on paper, with nothing open.
Deliverable: A five-item sub-skill map with the two blocking sub-skills circled.
Practice prompt ↗Practice prompt ↗03Largest gap: drill the blocking sub-skill
- Do eight short repetitions of the same shape rather than eight different problems, so what you practise is the pattern and not the puzzle.
- Write the rule you now hold in one sentence, then test it against a case built to break it: a ranking function over a column with ties, or a two-sample test on observations that are obviously dependent.
- Have someone else read your one-sentence rule and find the precondition you left out.
Deliverable: One rule statement with its preconditions attached and one counterexample that would have caught the incomplete version.
Practice prompt ↗Practice prompt ↗04Second gap, plus maintenance on your strongest area
- Run the same sub-skill map and boundary protocol on the second-largest gap, compressed into half the day.
- Spend 25 timed minutes on your strongest area to stop it decaying, choosing the hardest problem you can still finish rather than an easy warm-up.
- Compare how the two areas fail: whether you lose time on recall, on setup, or on arithmetic, because the fix differs for each.
Deliverable: A second sub-skill map plus a one-line diagnosis of how each area fails you.
Practice prompt ↗Practice prompt ↗Worked solution ↗05The gap that is not a skill
- Record yourself answering one technical and one behavioural prompt, then count two things in the playback: how many seconds before your first clarifying question, and how many sentences you started without knowing where they ended.
- Rewrite your three most-used stock phrases into shorter versions, and practise saying "I do not know, here is how I would find out" without softening it into a guess.
- Deliver one answer again with a hard 90-second limit to force structure before detail.
Deliverable: Two recordings with a counted improvement in time-to-first-question.
Practice prompt ↗Practice prompt ↗06Retest under day-one conditions
- Sit the same 100-minute diagnostic structure with new prompts of comparable difficulty and score it on the identical rubric.
- Compare block by block, and for any block that did not move, change the method rather than adding hours: a block stuck at 1 usually means the practice was too varied, not too short.
- Write which single block you would still lose the offer on.
Deliverable: A second scored rubric placed next to the first, with one named remaining risk.
Practice prompt ↗Practice prompt ↗07Full loop under interview conditions
- Run a 60-minute mock covering the two blocks that moved least, with an interviewer instructed to interrupt and change direction.
- Write your recovery script for the moment you go blank: restate the question, state your assumption, name the first thing you would check.
- Reduce the week to the rule statements you wrote, each with its preconditions attached, then say every one of them out loud without reading it and cut any you cannot state in a single sentence, since a rule you have to reconstruct mid-answer will not survive being interrupted.
Deliverable: A one-page card holding the recovery script and only the rules you could state from memory.
Practice prompt ↗Practice prompt ↗Worked solution ↗Expand any day for tasks and deliverables. Your progress is saved on this device.
Work that nobody used is a common and unflattering pattern in data careers, and interviewers probe for it. Have a story about an analysis that changed a decision, and be specific about how you got it in front of the person who could act. Also have one about work that went nowhere, with your reading of why.
Describe a situation where you had to communicate complex technical in…
Describe a situation where you had to communicate complex technical information to a non-technical audience.
Approach
- State the situation in two sentences and spend the rest on your reasoning.
- Pick a story where you drove the decision, not one where you observed it.
- Close with what you would do differently, concretely.
Follow-up
- What did you decide not to do, and why?
- How did you know the outcome was caused by your change?
Turn a one-line fraud-number request into a scoped brief
A stakeholder messages: what is our fraud rate, and is it going up? You have fct_payment_authorization, fct_card_dispute and dim_customer. At least four defensible answers exist: count-weighted or value-weighted, attributed to the transaction month or to the dispute filing month, and gross or net of recoveries and successful representments. You get one reply before someone else produces an uncaveated number. Write that reply: the clarifying questions you ask, the single default you will produce if nobody answers, and what the default excludes.
Approach
- Establish the decision behind the question first, because a risk-rule change, a board number and a merchant contract negotiation need different denominators, and asking which one is not stalling.
- Offer a short menu rather than an open question: a stakeholder can choose between two named options but cannot specify a denominator from scratch.
- Commit to a default so the reply is useful even if nobody answers, for example net fraud loss in basis points of settled volume, attributed to the requested_at month, matured months only.
- State the exclusions in the same breath as the default: non-fraud dispute categories, transaction months with less than 120 days of maturity, and first-party abuse that arrives coded as consumer_dispute.
- Give a delivery time for the default and a longer one for the fuller cut, so the choice between them carries a visible cost.
Follow-up
- They come back wanting it by merchant for a contract negotiation. What changes in the definition and in the maturity rule?
- How would you separate first-party abuse from third-party fraud in this data, and what would you refuse to conclude from the split?
Disagree with a product manager over an approval-rate target
A product manager proposes a quarterly goal of raising card authorization approval rate by 150 basis points, measured as approved authorizations divided by all authorizations in fct_payment_authorization. You believe that metric can be hit with no customer benefit, because merchant retry chains, zero-amount verification authorizations, incremental authorizations and reversals all sit in the denominator, and declines skew toward high-value cross-border ecommerce. You support the underlying goal. In one working session, change the metric without killing the initiative, and name the guardrail you would accept.
Approach
- Separate the goal from the metric out loud and agree with the goal first, so the disagreement stays narrow and technical rather than becoming positional.
- Demonstrate the failure rather than asserting it: compute the proposed metric and the dollar-weighted collapsed version over the same recent window, and find a period where they moved in opposite directions.
- Propose the replacement precisely: sum of approved amount_minor over sum of attempted amount_minor, after collapsing retries to one attempt per card_token_id, merchant_id and amount_minor within a 15-minute window, excluding is_reversal rows and zero-amount verifications, with everything converted to one reporting currency before summing.
- Attach the guardrail that makes the target honest: matured first-chargeback rate and net fraud loss in basis points of settled volume, read only on transaction months carrying at least 120 days of maturity.
- Give the product manager something back: the replacement metric cuts cleanly by channel and issuer_country, which makes a roadmap of merchant-specific and authentication fixes legible in a way the blended rate never was.
Follow-up
- How do you identify a retry chain when the merchant varies the amount slightly between attempts?
- The product manager wants a weekly read on the guardrail. What is the earliest defensible signal, and how do you label it?
- 01
Describe a situation where you had to communicate complex technical information to a non-technical audience.
- 02
A stakeholder messages: what is our fraud rate, and is it going up? You have fct_payment_authorization, fct_card_dispute and dim_customer. At least four defensible answers exist: count-weighted or value-weighted, attributed to the transaction month or to the dispute filing month, and gross or net of recoveries and successful representments. You get one reply before someone else produces an uncaveated number. Write that reply: the clarifying questions you ask, the single default you will produce if nobody answers, and what the default excludes.
- 03
A product manager proposes a quarterly goal of raising card authorization approval rate by 150 basis points, measured as approved authorizations divided by all authorizations in fct_payment_authorization. You believe that metric can be hit with no customer benefit, because merchant retry chains, zero-amount verification authorizations, incremental authorizations and reversals all sit in the denominator, and declines skew toward high-value cross-border ecommerce. You support the underlying goal. In one working session, change the metric without killing the initiative, and name the guardrail you would accept.
Is this an official Strategic Research Insights interview guide?
No. It is PracHub's own research and practice material for the Data Scientist role at Strategic Research Insights. Rounds and questions reflect what candidates have reported, not a process Strategic Research Insights has published, and they change over time. Confirm the current format and scope with your recruiter.
PracHub interview research ↗How difficult is the interview process?
The interview process is rigorous but fair, designed to assess both your technical and soft skills. Candidates typically spend several weeks preparing, focusing on core data science concepts and practical coding skills.
PracHub interview research ↗What differentiates successful candidates?
Successful candidates demonstrate a strong grasp of technical skills while effectively communicating their thought processes and insights. They also exhibit a collaborative spirit that aligns with the company culture.
PracHub interview research ↗What is the typical timeline from the initial screen to offer?
The timeline can vary, but candidates often receive feedback within a few weeks after their interviews. Expect to engage in multiple rounds, especially if you progress beyond initial screenings.
PracHub interview research ↗Are there remote work options?
The company offers flexible working arrangements, including remote and hybrid options, depending on team needs and candidate preferences.
PracHub interview research ↗Sources & methodology 3 sources ↗
No official company page is cited. Rounds and questions come from candidate reports and PracHub editorial material; each source shows the date it was read.
- 01PracHub interview research ↗
PracHub editorial research into this company and role, maintained with this guide. Candidate-reported, not an employer publication.
PracHub page · Accessed 2026-09-22 - 02PracHub Data Scientist practice ↗
Cross-company practice questions for this role.
PracHub page · Accessed 2026-09-22 - 03PracHub interview preparation framework ↗
The framework the preparation plan follows.
PracHub page · Accessed 2026-09-22
Explore related engineering environments and compare the preparation focus.
1st Central Data Scientist Interview Questions & Guide 2026
Causal-inference exercises for 1st Central data scientist prep: difference-in-differences, matching, instrumental variables, and knowing when observational data simply cannot answer the question asked.
3M Data Scientist Interview Questions & Guide 2026
Communication practice for 3M data scientist candidates: turn an analysis into a recommendation, name the uncertainty honestly, and answer the follow-up a skeptical stakeholder will raise.
ValueLabs Data Scientist Interview Questions & Guide 2026
Causal-inference exercises for ValueLabs data scientist prep: difference-in-differences, matching, instrumental variables, and knowing when observational data simply cannot answer the question asked.
vConstruct Data Scientist Interview Questions & Guide 2026
Communication practice for vConstruct data scientist candidates: turn an analysis into a recommendation, name the uncertainty honestly, and answer the follow-up a skeptical stakeholder will raise.