The Data Scientist role at United Auto Credit is a critical function tasked with transforming raw financial and operational data into actionable insights that drive the company’s automotive lending strategy. You will sit at the intersection of quantitative analysis and business strategy, working closely with product and management teams to optimize credit risk assessment, loan performance, and customer acquisition channels.
Your work directly influences how United Auto Credit manages its portfolio and evaluates creditworthiness. By designing robust metrics and building predictive models, you will help the organization navigate the complexities of the automotive finance market. This role requires not just technical proficiency, but a product-oriented mindset to ensure that data-driven decisions translate into measurable business value.
Preparation focus
editorialNo round sequence has been reported for this company, so work the categories below and confirm the format with your recruiter.
What to demonstrate
- Breadth across SQL, experimentation and product reasoning
- Ability to state assumptions before choosing a method
How to prepare
- Drill the practice exercises below and time yourself
- Prepare three quantified stories about decisions you drove
PracHub editorial advice for the preparation topics above.
Reading the most recent months of fraud and dispute rates as final
Consumer dispute rights commonly run around 120 days from the transaction or expected delivery date, and several reason codes run considerably longer, so the disputes belonging to a recent transaction month have simply not been filed yet. Any chart attributed by transaction date therefore slopes down at the right edge regardless of what is happening. The fix is to report only matured cohorts, or to apply development factors estimated from completed months and to show the estimate as an estimate.
Counting authorizations instead of weighting them, and summing amounts across currencies
Declines skew toward high-value, cross-border and card-not-present transactions, so an unweighted approval rate can sit flat while approved value falls. Merchant retry logic also turns one declined purchase into several rows, inflating the denominator by an amount that varies by merchant and by decline reason. Amounts are held in the minor unit of the transaction currency and that unit is not always two decimals, since some currencies have none and some have three, so summing amount_minor across currencies produces a figure with no interpretation at all.
Reaching for a model before the target metric exists
Before naming an algorithm, write down the label, the prediction time, and the action that changes when the score crosses a threshold. If you cannot say what decision the output drives, any modelling choice is guesswork dressed up as method.
Solving silently instead of narrating the reasoning
Say which branch you are taking and why you chose it over the alternative, for example checking the denominator first because it changes what the comparison means. A correct answer that arrives with no visible path scores below a rigorous one that needed a hint.
Choose a category, try a prompt, then open its approach, worked solution or follow-up when you need it.
Collapse retry chains and compute a dollar-weighted approval rate
fct_payment_authorization gives auth_id, card_token_id, merchant_id, amount_minor, transaction_currency, requested_at, auth_result, is_reversal, channel and issuer_country. Two reference frames give the minor-unit exponent per currency and a daily rate to one reporting currency. Collapse retry chains first: attempts sharing card_token_id, merchant_id and amount_minor whose consecutive gaps are under 15 minutes form a single attempt, whose outcome is its last row. Exclude reversals and zero-amount verifications. Return a 7-day rolling dollar-weighted approval rate by channel and issuer_country.
Approach
- Filter before grouping: drop is_reversal rows and zero-amount verifications, since neither is a purchase attempt and both would otherwise sit in the denominator.
- Sort by card_token_id, merchant_id, amount_minor and requested_at, take the gap to the previous row within that key, mark a chain start where the gap exceeds 15 minutes or the key changes, and label chains with a cumulative sum of that flag. This is a gap rule between consecutive attempts, not a fixed clock bucket, so a chain may span more than 15 minutes in total.
- Keep each chain's terminal row by requested_at. If a retry was approved, the purchase was approved; keeping the first row reports the decline that caused the retry as the outcome.
- Convert amounts exactly once: amount_minor divided by 10 to the power of the currency exponent, multiplied by the reference rate for the authorization date. Do not reach for settlement_fx_rate, which is null on precisely the declined rows the denominator needs.
- Build the rolling window as a ratio of two rolling sums, approved value over total value, per channel and issuer_country. A rolling mean of daily ratios weights a quiet Sunday the same as a busy Friday.
Follow-up
- The count-weighted rate is flat while the dollar-weighted rate falls 80 basis points. What do you look at first?
- How would you choose the 15-minute window rather than inheriting it?
- A merchant moves from two retries to five. Which of your two rates moves, and is that a real change in approval quality?
Bootstrap a fraud loss rate that clusters within merchant
You have a per-transaction frame with auth_id, merchant_id, settled_amount_reporting and net_loss_reporting, both already in one reporting currency. Most rows carry zero loss, a few carry large ones, and losses cluster within merchant. Using only numpy's random generator and no resampling helper from any library, write a bootstrap that returns a 95 percent interval for net fraud loss in basis points of settled volume, resampling merchants with replacement and taking all rows belonging to each drawn merchant. Also produce the naive row-level interval and state which you would report.
Approach
- State the estimator before writing it: total net loss divided by total settled volume, times 10,000. It is a ratio of sums, so each replicate recomputes both sums. Averaging per-transaction loss rates instead would weight a five-unit transaction like a five-thousand-unit one.
- Pre-aggregate loss and volume to merchant level once. For a ratio of sums, drawing merchants and taking all their rows is arithmetically identical to drawing merchant-level (loss_sum, volume_sum) pairs, so a replicate becomes one integer draw plus two vectorised sums rather than a groupby inside the loop.
- Draw B replicates of M merchant indices with replacement, where M is the observed merchant count, compute the ratio per replicate, and take the 2.5th and 97.5th percentiles. Say explicitly that this is a percentile interval and that BCa would correct the skew-induced bias if the decision is close.
- Repeat with independent row draws for the naive interval and compare widths on the same replicate count.
- Report the clustered interval. Rows within a merchant share an acceptance profile, a category code and a fraud exposure, so they are not independent, and the row-level interval understates variance by roughly the design effect.
Worked solution 30 min
- Compute the point estimate directly on the full data and keep it for comparison.
- Aggregate to merchant-level loss and volume arrays, record M, and set B to 2,000 with a seeded numpy Generator.
- In a vectorised loop, draw integer indices of shape (B, M), index both arrays, sum along axis 1, and take the ratio times 10,000.
- Repeat for the row-level version using the per-transaction arrays and N draws.
- Take the 2.5 and 97.5 percentiles of each replicate array and report both intervals alongside the point estimate.
Follow-up
- Your clustered interval is three times wider. How do you explain that to someone who wanted a tighter number?
- One merchant accounts for 40 percent of losses. What does that do to the interval, and what would you do about it?
- How does this change if the question is whether two months differ rather than what this month's rate is?
Implement accident-quarter loss ratio at twelve months development
fct_policy_period_monthly arrives as a stack of month-end snapshots: each row carries valuation_month alongside as_of_month, policy_id, product_line, written_premium_minor, earned_premium_minor, paid_loss_minor, case_reserve_minor, ibnr_reserve_minor and loss_adjustment_expense_minor. Compute the accident-quarter loss ratio at exactly 12 months of development: incurred losses over earned premium, both taken from rows whose as_of_month falls in the accident quarter, read from the snapshot 12 months after that quarter closes. Report quarters that cannot reach that age as incomplete rather than dropping them.
Approach
- Derive accident_quarter from as_of_month, then define the evaluation snapshot per quarter as valuation_month equal to the quarter's final month plus twelve months. Every figure in the ratio comes from that one snapshot, not from whichever snapshot happens to be newest.
- Numerator is paid_loss_minor plus case_reserve_minor plus ibnr_reserve_minor over the accident quarter's rows in that snapshot. Loss adjustment expense may be included or not, but the choice applies to every quarter and is named in an output column.
- Denominator is earned_premium_minor over the same rows. Written premium is booked in full at inception, so in a growing book it runs ahead of earned premium and drags the ratio down, with the error reversing when the book shrinks.
- Left-join the full quarter list against available valuation months so a quarter with no 12-month snapshot yields status incomplete and a null ratio, instead of disappearing and shortening the series without saying so.
- Split by product_line, since both the loss ratio level and the speed of development differ by line, and a blended series moves with mix as much as with experience.
Follow-up
- The most recent complete quarter came in four points better than the one before. What do you check before calling it an improvement?
- How would you estimate the 12-month figure for a quarter that is only 6 months developed, and how would you label the estimate?
- Why can an expense ratio legitimately use a different denominator from the loss ratio in the same presentation?
Write a query using window functions to calculate the moving average o…
Write a query using window functions to calculate the moving average of monthly loan defaults.
Approach
- State the window function and its partition and ordering out loud before writing it.
- Check whether any join is one-to-many before aggregating, or the sums inflate.
- Compute rates by summing numerator and denominator separately, never by averaging rates.
Follow-up
- What breaks if events arrive late or out of order?
- How would you verify this result without re-running the same query?
Count-weighted and dollar-weighted approval rates on one currency
Using fct_payment_authorization, report the trailing 7-day authorization approval rate two ways for transaction_currency = 'EUR': count-weighted, and dollar-weighted on amount_minor. Exclude is_reversal = true, exclude incremental authorizations (parent_auth_id not null), and exclude zero-amount account verifications. auth_result = 'approved' is the numerator; the four declined_* values make up the rest of the denominator. Return channel, attempts, approved_attempts, approval_rate_count and approval_rate_value. State every exclusion and its reason before you write the SELECT.
Approach
- Say the denominator out loud first: attempts on a single transaction currency, excluding reversals, incremental authorizations and zero-amount verifications, because none of those is a purchase attempt a merchant is trying to get approved.
- Filter requested_at against a half-open interval (>= start AND < end) so the boundary day is neither dropped nor double counted.
- Compute both rates in one pass with FILTER clauses: COUNT() FILTER (WHERE auth_result = 'approved') over COUNT(), and SUM(amount_minor) FILTER (WHERE auth_result = 'approved') over SUM(amount_minor).
- Cast one side of each ratio to numeric before dividing, since amount_minor and the counts are integers and integer division silently truncates to zero.
- Group by channel and sort by the value-weighted rate, then read the gap between the two rates as a statement about where the declines sit rather than as noise.
Worked solution 20 min
- Write the exclusion list as comments above the query: is_reversal = false, parent_auth_id is null, amount_minor > 0, transaction_currency = 'EUR'.
- Build a single aggregate query over fct_payment_authorization with a half-open requested_at predicate and those four filters.
- Emit attempts, approved_attempts, approval_rate_count and approval_rate_value with FILTER clauses and a numeric cast on the numerator.
- Group by channel, order by approval_rate_value ascending so the worst channel is on top.
Follow-up
- The two rates diverge by four points on the ecommerce channel but agree on card_present. What does that tell you, and what would you cut next?
- How would you extend this to all currencies without summing amount_minor across them?
- Which of the four decline reasons belong in the denominator of a rate you would put in front of a risk team, and which are really the network's problem?
Which key performance indicators would you track to measure the succes…
Which key performance indicators would you track to measure the success of a new customer retention initiative?
Approach
- Name one primary metric, then the guardrail that stops it being gamed.
- Fix the population and the time window before naming any metric.
- Restate the decision this analysis has to support, and who acts on the answer.
Follow-up
- Which segment would you cut first, and what would that rule out?
- What would you do if the primary metric and the guardrail moved in opposite directions?
If we observed a sudden 10% drop in loan applications, how would you i…
If we observed a sudden 10% drop in loan applications, how would you investigate the root cause?
Approach
- Name one primary metric, then the guardrail that stops it being gamed.
- Restate the decision this analysis has to support, and who acts on the answer.
- Fix the population and the time window before naming any metric.
Follow-up
- Which segment would you cut first, and what would that rule out?
- What would you do if the primary metric and the guardrail moved in opposite directions?
How would you design a dashboard to monitor the health of our loan app…
How would you design a dashboard to monitor the health of our loan approval funnel?
Approach
- State what result would change your recommendation, so the answer is falsifiable.
- Name one primary metric, then the guardrail that stops it being gamed.
- Decompose the metric into the rates that drive it, and say which one you would check first.
Follow-up
- How would you detect that the metric is being gamed rather than genuinely improving?
- What would you do if the primary metric and the guardrail moved in opposite directions?
How do you balance the trade-off between strict risk management and ma…
How do you balance the trade-off between strict risk management and maximizing loan volume?
Approach
- State what result would change your recommendation, so the answer is falsifiable.
- Fix the population and the time window before naming any metric.
- Decompose the metric into the rates that drive it, and say which one you would check first.
Follow-up
- Which segment would you cut first, and what would that rule out?
- How would you detect that the metric is being gamed rather than genuinely improving?
Success metrics for loosening a fraud decline threshold
A risk team proposes lowering the risk_score cutoff that produces auth_result = 'declined_risk_rule'. Settled volume per active customer is the north star; net fraud loss in basis points of settled volume is the guardrail. The two move in opposite directions by construction. Specify the readout: primary metric, guardrail, the maturity window each is read at, and the decision rule agreed before launch. Show the expected-cost arithmetic that sets the cutoff using an average ticket of 200 units, a 1.5 percent contribution margin, 35 percent recovery on fraud losses, and 12 units of downstream value lost per false decline.
Approach
- Refuse the two-metric framing and convert both sides into one currency. Approving a fraudulent transaction costs the amount net of recovery; declining a good one costs the forgone margin plus the downstream value of the customer's reaction. Decline when p times C_FN exceeds (1 minus p) times C_FP, so the break-even probability is p* = C_FP / (C_FP + C_FN).
- Put the numbers in. C_FN = 200 times (1 minus 0.35) = 130, C_FP = 200 times 0.015 plus 12 = 15, so p* = 15 / 145 = 10.3 percent. Then show the threshold is amount-dependent: at a 2,000 ticket C_FN = 1,300 and C_FP = 42, giving p* = 3.1 percent, so a single global cutoff is already the wrong shape before any tuning starts.
- State the precondition that makes this arithmetic legal: risk_score has to be calibrated, so that a score of 0.10 corresponds to an observed 10 percent fraud rate. A score that only ranks makes p* meaningless. Check the reliability curve before quoting any cutoff to anyone.
- Set the maturity windows separately. Volume is readable within days, fraud loss is not, so the guardrail is read only on transaction months with at least 120 days of dispute maturity and the decision stays open until then, or a leading indicator is agreed in advance with its bias written down.
- Agree the stopping rule before launch in the right units: revert if matured net fraud loss per unit of incremental settled volume exceeds the figure implied by p*. Fraud loss is supposed to rise when the cutoff loosens, so a rule that triggers on any rise is a rule that was never going to allow the change.
- Report the swap set rather than portfolio totals: the transactions the new cutoff approves that the old one declined, and their realised loss rate. Portfolio aggregates dilute the change into invisibility.
Worked solution 30 min
- Compute p* at ticket sizes of 50, 200 and 2,000 with the given margin, recovery and false-decline cost, and tabulate them.
- Bucket historical declined_risk_rule authorizations by risk_score decile and, for each bucket, write down what outcome data exists and what does not.
- Write the readout spec: primary metric, guardrail, the 120-day maturity rule, the swap-set table and the numeric stopping rule.
- Write the calibration precondition in two sentences and say how you would test it.
Follow-up
- Fraud loss in basis points falls after launch. Name two ways that happens without any improvement in decisioning.
- How do you keep observing outcomes in the region the rule still declines?
- What changes if the 12 units of downstream value is a guess with no evidence behind it?
Manual review rate doubles on the day two changes ship
Manual review rate on fct_loan_application, defined as decided_by = 'manual' over decisions in ('approve','decline'), stepped from 9 to 18 percent on a single day. That day a new model_version went live, and the same release changed which referral paths are recorded as manual. Columns: submitted_at, channel, bureau_score, model_pd_12m, model_version, policy_rule_hits, decision, decided_by, decision_at. Attribute the step across definition, model and population, with a number against each.
Approach
- Establish the shape before the cause. A definition or code change produces a step at the deploy timestamp; a population change produces a ramp. Plot at hourly granularity either side of the release and read which one this is.
- Dual-run the definition. Recompute the metric under both the old and the new recording rules across several months of history. If the historical series under the new rule sits near 18 percent throughout, that part of the step is definitional and should be restated, not investigated.
- Hold the model constant and decompose the residual by policy_rule_hits identifier. A referral rule keyed to a score threshold shows its own step, and naming the rule is what makes the finding actionable to the policy owner.
- Test the score, not the applicants. Compare model_pd_12m distributions by model_version on the same applications where shadow scores exist; otherwise compare adjacent weeks with a population stability index, treating the customary 0.1 and 0.25 marks as heuristics rather than tests, and assess calibration separately from ranking.
- Test the applicants, not the score. Compare channel mix, bureau_score distribution and null-bureau share across the boundary. If those are stable, population is not a driver and should be reported as approximately zero rather than left unquantified.
- Deliver three components that sum to the observed step, each with the team that owns it.
Follow-up
- If the new model is better calibrated, is a higher referral rate the correct outcome or a threshold nobody retuned?
- How would you have caught the recording change before it reached the dashboard?
- What is the swap set here, and which swap group would you inspect first?
Instead of guessing where the week should go, day one measures it under a fixed rubric and allocates the remaining hours in proportion to the gaps. The method is deliberately rigid: the allocation is written down before any studying starts and is not renegotiated when a topic turns out to be unpleasant.
Prepare, practise & reflect
One practical outcome each day. Spend longer where you need it.
0 / 7 done01Diagnostic, scored before you study anything
- Sit a 100-minute timed diagnostic in four blocks: 30 minutes of SQL across three prompts, 25 minutes of short-answer statistics, 25 minutes on one modelling or case prompt, and 20 minutes delivering one behavioural story aloud.
- Score each block from 0 to 3 on a fixed rubric where 3 is correct and fluent, 2 is correct but slow or prompted, 1 is partially correct, and 0 is stuck, grading the output rather than how the attempt felt.
- Allocate the hours for days two to five roughly in proportion to 3 minus the score in each block, write the allocation down, and commit to not revising it midweek.
Deliverable: A scored rubric and a fixed hour allocation for the rest of the week.
Practice prompt ↗Practice prompt ↗Worked solution ↗02Largest gap: find the boundary rather than the subject
- Break the weakest area into five named sub-skills (for query work: grain control, window frames, date arithmetic, set logic with NULLs, and reading a query plan) and rate each one, so the rest of the week targets a sub-skill instead of a subject.
- Solve three problems chosen to sit just above where the rating drops off, and for each write the first move you failed to make.
- Re-solve one of them from memory four hours later, on paper, with nothing open.
Deliverable: A five-item sub-skill map with the two blocking sub-skills circled.
Practice prompt ↗Practice prompt ↗03Largest gap: drill the blocking sub-skill
- Do eight short repetitions of the same shape rather than eight different problems, so what you practise is the pattern and not the puzzle.
- Write the rule you now hold in one sentence, then test it against a case built to break it: a ranking function over a column with ties, or a two-sample test on observations that are obviously dependent.
- Have someone else read your one-sentence rule and find the precondition you left out.
Deliverable: One rule statement with its preconditions attached and one counterexample that would have caught the incomplete version.
Practice prompt ↗Practice prompt ↗04Second gap, plus maintenance on your strongest area
- Run the same sub-skill map and boundary protocol on the second-largest gap, compressed into half the day.
- Spend 25 timed minutes on your strongest area to stop it decaying, choosing the hardest problem you can still finish rather than an easy warm-up.
- Compare how the two areas fail: whether you lose time on recall, on setup, or on arithmetic, because the fix differs for each.
Deliverable: A second sub-skill map plus a one-line diagnosis of how each area fails you.
Practice prompt ↗Practice prompt ↗Worked solution ↗05The gap that is not a skill
- Record yourself answering one technical and one behavioural prompt, then count two things in the playback: how many seconds before your first clarifying question, and how many sentences you started without knowing where they ended.
- Rewrite your three most-used stock phrases into shorter versions, and practise saying "I do not know, here is how I would find out" without softening it into a guess.
- Deliver one answer again with a hard 90-second limit to force structure before detail.
Deliverable: Two recordings with a counted improvement in time-to-first-question.
Practice prompt ↗Practice prompt ↗06Retest under day-one conditions
- Sit the same 100-minute diagnostic structure with new prompts of comparable difficulty and score it on the identical rubric.
- Compare block by block, and for any block that did not move, change the method rather than adding hours: a block stuck at 1 usually means the practice was too varied, not too short.
- Write which single block you would still lose the offer on.
Deliverable: A second scored rubric placed next to the first, with one named remaining risk.
Practice prompt ↗Practice prompt ↗07Full loop under interview conditions
- Run a 60-minute mock covering the two blocks that moved least, with an interviewer instructed to interrupt and change direction.
- Write your recovery script for the moment you go blank: restate the question, state your assumption, name the first thing you would check.
- Reduce the week to the rule statements you wrote, each with its preconditions attached, then say every one of them out loud without reading it and cut any you cannot state in a single sentence, since a rule you have to reconstruct mid-answer will not survive being interrupted.
Deliverable: A one-page card holding the recovery script and only the rules you could state from memory.
Practice prompt ↗Practice prompt ↗Worked solution ↗Expand any day for tasks and deliverables. Your progress is saved on this device.
Nearly every data role forces a trade between the analysis you want and the one that fits the decision window. Prepare a case where you deliberately shipped something less rigorous, named the weakness to the person relying on it, and said what would change your answer. The naming is the part interviewers listen for.
Turn a one-line fraud-number request into a scoped brief
A stakeholder messages: what is our fraud rate, and is it going up? You have fct_payment_authorization, fct_card_dispute and dim_customer. At least four defensible answers exist: count-weighted or value-weighted, attributed to the transaction month or to the dispute filing month, and gross or net of recoveries and successful representments. You get one reply before someone else produces an uncaveated number. Write that reply: the clarifying questions you ask, the single default you will produce if nobody answers, and what the default excludes.
Approach
- Establish the decision behind the question first, because a risk-rule change, a board number and a merchant contract negotiation need different denominators, and asking which one is not stalling.
- Offer a short menu rather than an open question: a stakeholder can choose between two named options but cannot specify a denominator from scratch.
- Commit to a default so the reply is useful even if nobody answers, for example net fraud loss in basis points of settled volume, attributed to the requested_at month, matured months only.
- State the exclusions in the same breath as the default: non-fraud dispute categories, transaction months with less than 120 days of maturity, and first-party abuse that arrives coded as consumer_dispute.
- Give a delivery time for the default and a longer one for the fuller cut, so the choice between them carries a visible cost.
Follow-up
- They come back wanting it by merchant for a contract negotiation. What changes in the definition and in the maturity rule?
- How would you separate first-party abuse from third-party fraud in this data, and what would you refuse to conclude from the split?
Recommend a decision whose true outcome matures a year later
An underwriting rule change must be decided in six weeks. Its real outcome, the vintage 90-plus rate at months_on_book 12 in fct_loan_performance_monthly, matures in a year. The executive wants a yes or no, not a range. Randomising the credit decision across the whole population is not available. Name the leading indicator you would accept, state its bias and the direction of that bias, define the decision rule and stopping condition before any rollout starts, and say what reading would make you recommend reversing the change.
Approach
- Fix the readout before the rollout, because a readout chosen after the data arrives is a story rather than a decision rule: indicator, window, threshold and reversal condition all go in writing first.
- Choose the leading indicator on its measured relationship to the matured outcome in historical vintages rather than on availability. Early delinquency, typically the share reaching dpd_1_29 or missing a first scheduled payment by months_on_book 3, is the usual candidate, and you quantify how well it predicted the 12-month rate across past cohorts.
- State the bias and its direction plainly: early delinquency under-represents default that emerges later and is contaminated by servicing and payment-date effects, so treat it as a floor on risk rather than an estimate of it.
- Buy identification where full randomisation is unavailable: a narrow randomised approval band around the cutoff, or a staged rollout by channel or region read as a difference-in-differences, with the parallel-trends assumption stated and checked in the pre-period rather than assumed.
- Give the executive the binary they asked for with the trigger attached in the same sentence: yes, conditional on the month-3 indicator staying inside a stated band, with an automatic hold if it breaches.
Follow-up
- How would you validate that the month-3 indicator predicts the 12-month outcome, and what evidence would invalidate it mid-rollout?
- Compliance refuses a randomised band. What is your next-best identification strategy, and what precision do you lose by taking it?
Retract a published number after finding a currency bug
Two weeks ago you published an interchange and fraud analysis that summed amount_minor across fct_payment_authorization without converting currencies. Minor units are not two decimals everywhere: some currencies carry none and some carry three, so the sum has no interpretation. A pricing decision is already in flight on the back of it. You now have corrected figures. Produce the retraction: what you send, to whom, in what order, and what you change in the process so this class of error is caught next time rather than trusted next time.
Approach
- Size the error before announcing it, because saying the number is wrong without a magnitude and a direction forces every reader to assume the worst case.
- Check whether the conclusion actually flips: if the ranking that drove the pricing decision is unchanged, that belongs in the first sentence beside the correction rather than buried at the end.
- Tell the person acting on it first and directly, then the wider distribution, using the same text, so nobody learns about it secondhand.
- Write the correction as four parts: the old number, the cause in one clause, the effect on the pending decision, and the new number. Leave out self-flagellation, which makes the reader do emotional work instead of acting.
- Fix the class rather than the instance: a rule that a sum over amount_minor either groups by transaction_currency or passes through both conversion steps, exponent scaling and then a dated rate into one named reporting currency, plus a standing reconciliation of the settled subset to the settlement ledger inside each settlement_currency.
Follow-up
- The corrected figures do not change the decision. Do you still send the correction, and what does that choice signal?
- What automated check would have caught this, where would it live, and what would it cost in false alarms?
- 01
A stakeholder messages: what is our fraud rate, and is it going up? You have fct_payment_authorization, fct_card_dispute and dim_customer. At least four defensible answers exist: count-weighted or value-weighted, attributed to the transaction month or to the dispute filing month, and gross or net of recoveries and successful representments. You get one reply before someone else produces an uncaveated number. Write that reply: the clarifying questions you ask, the single default you will produce if nobody answers, and what the default excludes.
- 02
An underwriting rule change must be decided in six weeks. Its real outcome, the vintage 90-plus rate at months_on_book 12 in fct_loan_performance_monthly, matures in a year. The executive wants a yes or no, not a range. Randomising the credit decision across the whole population is not available. Name the leading indicator you would accept, state its bias and the direction of that bias, define the decision rule and stopping condition before any rollout starts, and say what reading would make you recommend reversing the change.
- 03
Two weeks ago you published an interchange and fraud analysis that summed amount_minor across fct_payment_authorization without converting currencies. Minor units are not two decimals everywhere: some currencies carry none and some carry three, so the sum has no interpretation. A pricing decision is already in flight on the back of it. You now have corrected figures. Produce the retraction: what you send, to whom, in what order, and what you change in the process so this class of error is caught next time rather than trusted next time.
Is this an official United Auto Credit interview guide?
No. It is PracHub's own research and practice material for the Data Scientist role at United Auto Credit. Rounds and questions reflect what candidates have reported, not a process United Auto Credit has published, and they change over time. Confirm the current format and scope with your recruiter.
PracHub interview research ↗How should I prepare for the technical assessment?
Focus on solving practical data manipulation problems using SQL and Python. Practice writing efficient queries for window functions and handling edge cases in datasets.
PracHub interview research ↗What is the most important factor in the interview?
The ability to connect technical analysis to business impact. Always prioritize the "why" and "how" of your recommendations.
PracHub interview research ↗Is the interview process difficult?
Candidates generally report a moderate level of difficulty. The key is consistency; maintain a clear, logical thought process throughout your responses.
PracHub interview research ↗How long does the process take?
Timelines can vary significantly, sometimes spanning several weeks or even months. Stay engaged and follow up with your recruiter periodically.
PracHub interview research ↗Sources & methodology 3 sources ↗
No official company page is cited. Rounds and questions come from candidate reports and PracHub editorial material; each source shows the date it was read.
- 01PracHub interview research ↗
PracHub editorial research into this company and role, maintained with this guide. Candidate-reported, not an employer publication.
PracHub page · Accessed 2026-09-22 - 02PracHub Data Scientist practice ↗
Cross-company practice questions for this role.
PracHub page · Accessed 2026-09-22 - 03PracHub interview preparation framework ↗
The framework the preparation plan follows.
PracHub page · Accessed 2026-09-22
Explore related engineering environments and compare the preparation focus.
1st Central Data Scientist Interview Questions & Guide 2026
Causal-inference exercises for 1st Central data scientist prep: difference-in-differences, matching, instrumental variables, and knowing when observational data simply cannot answer the question asked.
3M Data Scientist Interview Questions & Guide 2026
Communication practice for 3M data scientist candidates: turn an analysis into a recommendation, name the uncertainty honestly, and answer the follow-up a skeptical stakeholder will raise.
ValueLabs Data Scientist Interview Questions & Guide 2026
Causal-inference exercises for ValueLabs data scientist prep: difference-in-differences, matching, instrumental variables, and knowing when observational data simply cannot answer the question asked.
vConstruct Data Scientist Interview Questions & Guide 2026
Communication practice for vConstruct data scientist candidates: turn an analysis into a recommendation, name the uncertainty honestly, and answer the follow-up a skeptical stakeholder will raise.