A Software Engineer at valantic plays a pivotal role in delivering high-impact digital solutions that drive business transformation for a diverse range of clients. You are not just writing code; you are contributing to complex architectures and scalable systems that solve real-world problems. The environment is fast-paced, professional, and highly collaborative, requiring you to bridge the gap between technical implementation and business requirements.
This role is critical because valantic prides itself on deep industry expertise and technical excellence. As a Software Engineer, you will be expected to maintain high standards of code quality while navigating the technical nuances of various projects. Whether you are working on internal tools or client-facing applications, your work directly influences the efficiency and technological capability of the organizations valantic supports.
Application Review
reportedBefore anything technical happens, someone has to decide which rung of the ladder your loop is calibrated to, and that decision sets the bar for every round after it. It comes from how you describe scope, not from your title, because titles do not convert cleanly between companies. The weak version of the answer is team size and years. The strong version names the largest change you shipped where nobody reviewed the design, what would have broken if you had been wrong, and what you were paged for. Get the level said out loud on this call, because the range and the loop both follow from it.
What to demonstrate
- Whether the scope in your own account maps onto a level the team actually has an opening at, so a mismatch ends the process cheaply rather than after four interviewers have spent a day
- Whether your title needs re-mapping: the same word describes very different amounts of independent decision-making at a twenty-person company and a ten-thousand-person one
- Whether your compensation expectation can be filled at that level in the structure the role pays in, which is why the number gets asked for before any engineer is scheduled
How to prepare
- Write down two changes from the last two years: the largest one you designed with nobody reviewing the design, and the largest one where someone more senior did. Lead with the first when scope comes up, and be ready to say which parts of the second were yours
- Ask which level the loop is calibrated to and what changes at the level above it, then plan your weeks from that answer rather than from the posting
- Settle a total-compensation range beforehand with the split named, base against bonus against equity and its vesting period, so a question about numbers gets a number instead of the word market
HR Discussion
reportedAn unlabelled round is first an information problem, and the cheapest information is free. Whoever schedules it can usually tell you how long it runs, who will be in the room and what they work on, whether you will be writing code and in what environment, and whether anything is being sent beforehand. Ask in writing so the answer is on record, then prepare for the two or three formats those answers still leave open instead of betting on one. What separates a strong candidate is not guessing right; it is having an opening that works whichever one it turns out to be.
What to demonstrate
- Whether you can start work from an ambiguous brief, since tolerating a vague scope without stalling is the same thing the job asks for
- Whether the questions you asked beforehand were ones that change your preparation, such as duration, medium and who is joining, rather than ones whose answers you could not have acted on
- Whether you adapt when the round turns out to be something other than what you were told, instead of spending the first ten minutes visibly recalibrating
How to prepare
- Send one short scheduling message asking four things: how long, who is joining and what they work on, whether you will be writing code and where, and whether to prepare anything in advance. Treat a vague reply as real information, since it means the round is loosely structured and you will be shaping it yourself.
- Write one opening that works in any of the formats still open: restate in your own words what you have been asked to do, then ask which of two directions is more useful to them. Say it aloud until it stops sounding recited.
- Set up for the two most likely formats before the call starts, with a blank editor in the language you would choose and a shared document you can type into, so a format surprise costs you nothing in the first minutes
Technical Discussion
reportedWhat this round decides is narrow: whether you can produce code that runs and is correct on inputs nobody showed you. An elegant solution that does not compile scores below a plain one that does, so write a correct brute force first, say out loud that you know its cost, and improve it with the working version still on screen. What separates strong answers is who finds the broken case. Trace your own code against an empty input, a single element, and duplicate keys before you say you are finished, because being told is far more expensive than noticing.
What to demonstrate
- Whether degenerate inputs get checked without being asked for: an empty collection, one element, every element equal, and the extreme value the input type allows
- Whether the complexity you state matches the code you actually wrote, including a sort or a copy sitting inside a loop
- Whether the finished answer is verified against the worked examples before you call it done, rather than assumed correct because the code reads correctly
How to prepare
- Take five problems you have already solved and, without running anything, write down what each returns for empty input, a single element, and all-duplicates. Then run them and count how many you predicted wrong.
- Drill the brute force as its own skill: on ten problems, write only the obviously-correct slow version and time how long it takes to get it passing. If that is more than a few minutes, that is what to practise, not the optimal version.
- Add a fixed last step before you submit anything, reading only the loop bounds and the initial value of each accumulator, which is where most off-by-one errors live
Live Coding Stage
reportedThe same problem is scored by two different mechanisms depending on the format, and preparing for one does not cover the other. With a person watching, partial progress is visible and a hint is a correction you can absorb; silence is the expensive failure, because nobody can read a half-written function. With an automated grader there is no partial credit for what you were about to do, nobody to ask, and the worked examples in the prompt are the entire specification. Read them as a contract, down to whether an empty result should be an empty list or no output at all.
What to demonstrate
- In a live session, whether your commentary tracks what your hands are doing, and whether a hint redirects you or gets defended against
- In an automated one, whether you cover the cases the examples do not show, since the hidden cases are where the score moves
- Whether you manage the clock on purpose: abandoning an approach that is not converging while there is still time to write something simpler that finishes
How to prepare
- Have someone hand you a problem and feed you one deliberately wrong hint. Practise testing it against a concrete case instead of accepting or rejecting it on authority.
- Do one timed run a week in a plain browser editor with autocomplete, linting and your own snippets switched off, which is closer to what these environments give you
- For the automated format, write the harness before the solution: a main that feeds the worked examples plus an empty and a single-element case and prints expected against actual, so a wrong submission is caught by you first
Final Decision
reportedCoding rounds mostly set a floor. They decide whether you clear the bar, not where you land on the ladder. Level tends to come out of the design discussion and the ownership stories, so the question worth auditing beforehand is whether the scope you describe matches the scope of the job. Work that stops at your own service, or a story whose hard part was writing the code rather than getting several people to agree on an interface, reads a level below where you think you are interviewing, and that gap is usually resolved downwards.
What to demonstrate
- Whether the largest thing you describe owning ran end to end — the decision, the migration path, the rollout, and what you did when it went wrong — or stopped at the change you merged
- Whether design answers include what you would not build, what you would defer, and what you would measure before committing, rather than only what the boxes are
- Whether a disagreement in a story was settled with something checkable — a benchmark, a prototype, a written proposal — instead of by seniority or by waiting it out
- Whether you can say which calls you made alone and which you escalated, and why the line sat where it did
How to prepare
- Write your largest piece of owned work as a timeline of decisions — who decided what, when, and what you did when the plan broke — then delete every sentence whose subject is "we" and see how much survives
- Take one system you know well and drill the migration answer: how old and new paths run side by side under live traffic, how you compare their outputs, what the rollback is once writes are going to both, and which step you would not automate
- Map each line of the ladder in the job posting to a specific thing you have done, find the line you cannot support, and prepare the closest evidence you have plus an honest account of the gap
PracHub editorial advice for the preparation topics above.
Assuming an isolation level prevents the anomaly you actually have
Isolation levels are named by the SQL standard but implemented differently, so any claim about one is only true of a named engine. PostgreSQL defaults to READ COMMITTED, where every statement takes a fresh snapshot, so two statements inside one transaction can legitimately disagree about the same row. Its REPEATABLE READ is snapshot isolation: it removes non-repeatable and phantom reads but permits write skew, where two transactions each read a set, each conclude their own write is safe, both commit, and the combined result violates a constraint that no single row expresses. Only SERIALIZABLE closes that, and it closes it by aborting a transaction with a serialization failure (SQLSTATE 40001), which means the guarantee is theoretical unless the application has a retry loop. InnoDB's REPEATABLE READ is a different mechanism again - plain SELECTs read a consistent snapshot while locking reads and writes see the latest committed row - so a read-modify-write inside one transaction can act on a value that the transaction's own earlier SELECT never returned.
Paginating with LIMIT/OFFSET over a set that changes while the client is reading it
OFFSET n makes the database produce and discard n rows before returning anything, so the cost of a page grows with its depth rather than with its size and page 500 costs five hundred pages of work. The correctness problem is worse than the cost: if a row is inserted or reordered between two page fetches, rows shift across the offset boundary and are either skipped entirely or returned twice, and neither outcome leaves any trace in the response for the client to detect. Keyset pagination - WHERE (sort_key, id) < ($last_sort_key, $last_id) ORDER BY sort_key DESC, id DESC LIMIT n, backed by an index in exactly that order - reads only the rows it returns and is stable against concurrent inserts. It requires the tie-break column: a timestamp is not unique, and duplicate sort keys straddling a page boundary reintroduce the skip it was adopted to remove.
Never running a concrete value through the code
Trace one small input and one edge input by hand, index by index, out loud. Re-reading your own code catches design mistakes; walking a real value through it catches the off-by-one, the uninitialised accumulator and the loop that never advances.
Sorting when the problem never required a total order
Match the algorithm to the guarantee actually needed: the top k comes from a size-k heap in O(n log k) time and O(k) space, distinctness needs a set rather than an ordering, and a small bounded integer key range admits a linear counting pass. A full O(n log n) sort is the right default only when you genuinely need everything in order.
Choose a category, try a prompt, then open its approach, worked solution or follow-up when you need it.
What is your process for debugging complex code issues during developm…
What is your process for debugging complex code issues during development?
Approach
- State the target complexity and say which constraint rules the naive version out.
- Walk one small example through your approach before writing the whole thing.
- Name the brute-force solution and its complexity before improving on it.
Follow-up
- Which test case would catch an off-by-one here?
- How does this change if the input no longer fits in memory?
Can you explain this specific technical concept or industry standard?
Can you explain this specific technical concept or industry standard?
Approach
- State the target complexity and say which constraint rules the naive version out.
- Walk one small example through your approach before writing the whole thing.
- Choose the data structure from the access pattern, not from familiarity.
Follow-up
- What is the worst case, and how likely is it on real data?
- How does this change if the input no longer fits in memory?
How do you ensure your code remains maintainable and scalable?
How do you ensure your code remains maintainable and scalable?
Approach
- Walk one small example through your approach before writing the whole thing.
- State the target complexity and say which constraint rules the naive version out.
- Choose the data structure from the access pattern, not from familiarity.
Follow-up
- Which test case would catch an off-by-one here?
- How does this change if the input no longer fits in memory?
Archive a resource graph without breaking live references or recursing
Resources reference other resources within a tenant; for the largest tenant the reference table holds up to 2,000,000 nodes and 8,000,000 edges. Archiving a resource must archive everything reachable from it that nothing outside the set still references, refuse when a live external referrer exists, and terminate when references form cycles, which they legitimately do. Produce the archive order and the refusal list, targeting O(V+E). Say what stops the traversal crossing a tenant boundary, and why recursion is the wrong control structure at this size.
Approach
- Load the subgraph with the tenant predicate on both endpoints of the edge, not only on the side you started from. Scoping the left table alone is the classic cross-tenant leak: one mis-entered edge then pulls another tenant's resources into the traversal and, worse, into the archive.
- Traverse iteratively with an explicit stack. A 2,000,000-node graph can hold a chain deep enough to exhaust a native stack in the low tens of thousands of frames, and that failure is a process crash rather than an error you can return.
- Treat cycles as data rather than corruption: compute strongly connected components with Tarjan in O(V+E) using its own explicit stack, then condense. The condensation is a DAG, so a topological order over it gives the archive order, and every member of a component archives in one transaction because no order within a cycle is valid.
- Decide refusals with reverse edges. A candidate is archivable only if every in-edge originates inside the candidate set, so build the transpose or count in-degrees restricted to the visited set, and emit each blocked resource with the id of the external referrer, which is the only part of the answer an operator can act on.
- Store the graph as CSR rather than a map of lists: an offsets array of V+1 8-byte entries plus E 8-byte targets is about 80 MB at this size, where boxed adjacency lists cost several times that and lose cache locality on every hop.
- Run Kahn over the condensation for the order in O(V+E). If the emitted count is short of the component count the condensation step itself is wrong, since a condensation cannot contain a cycle, which makes the check free.
Worked solution 30 min
- Write the edge-loading query with the tenant predicate on both endpoints and state what it does with a cross-tenant edge.
- Implement iterative Tarjan with an explicit stack and confirm on a three-node cycle that it emits one component of size three.
- Build the transpose restricted to the visited set and mark every node with an in-edge from outside it as refused, carrying the referrer id.
- Run Kahn over the condensation and verify the emitted order against the referrer-before-referenced rule.
- Size the CSR arrays for 2,000,000 nodes and 8,000,000 edges and compare against a boxed adjacency map.
Follow-up
- The graph is read in one query and the archive writes a minute later. What can change in between, and how do you make the write safe?
- The candidate set is 400,000 resources. Is that one transaction, and if not, what does a half-finished archive look like to a reader?
- An edge points at a resource in another tenant. Is that a refusal, an error, or an alert?
Stop tag and share joins from fanning out a page
resource_tag is (resource_id, tag_id) with PK (resource_id, tag_id); resource_share is (resource_id, shared_with_user_id, permission). The tagged-and-shared listing inner-joins resource to both, filters tenant_id, tag_id = ANY($2) and shared_with_user_id = $3, orders by updated_at DESC and takes 50. Pages come back with fewer than 50 distinct resources and the total in the header is far too high. Explain the row multiplication, rewrite both the page query and the count query so each is correct, and name the index each one needs. PostgreSQL 16.
Approach
- Do the arithmetic against the predicates that are actually there. An inner join emits one row per matching child row, and both joins are filtered: tag_id = ANY($2) admits only the requested tags, shared_with_user_id = $3 admits one user's share rows. So a resource holding three of the requested tags and shared with $3 once yields three rows, not one — the multiplier is its count of matching tags times its share rows for that single user, and that second factor is 1 unless the table admits duplicate (resource_id, shared_with_user_id) pairs. LIMIT 50 then limits rows rather than resources, and COUNT(*) counts pairs — the header is the product, not the population.
- Reject DISTINCT as the fix. It deduplicates after the product has been built, so the planner must materialise and sort the fanned-out set before the LIMIT can apply, and it leaves any SUM or AVG in the same select list wrong.
- Rewrite both filters as semi-joins, keeping resource as the only row source: AND EXISTS (SELECT 1 FROM resource_tag rt WHERE rt.resource_id = r.resource_id AND rt.tag_id = ANY($2)) and the same shape against resource_share. A semi-join stops at the first match per resource and preserves the driving index order, so ORDER BY updated_at DESC, resource_id DESC LIMIT 50 still stops after 50 rows.
- Count with the same predicates and no join at all: SELECT count(*) FROM resource r WHERE r.tenant_id = $1 AND r.status = 'active' AND EXISTS (...) AND EXISTS (...). Nothing multiplies a resource, so the number is the population.
- Attach the tags for display after the page has been cut — LEFT JOIN LATERAL (SELECT array_agg(rt.tag_id) FROM resource_tag rt WHERE rt.resource_id = p.resource_id) ON TRUE over the 50 returned rows. Aggregate over the page, never over the tenant.
- Index both directions and say which query each serves: PK (resource_id, tag_id) serves the lateral lookup, (tag_id, resource_id) serves the EXISTS probe by tag, and resource_share needs (shared_with_user_id, resource_id) for the same reason. An index covering one direction only leaves the other as a scan.
Worked solution 30 min
- Build a tenant where each resource carries 0-5 tags from a 20-tag vocabulary and is shared with 0-4 distinct users, then bind $2 to three tags and $3 to a user holding shares on about half the resources. Run the joined query and compare its row count to the distinct resource count on page one.
- Run COUNT(*) on the joined shape and on the EXISTS shape and compare both to a ground truth computed from distinct ids; then give $3 a second permission row on 10% of resources and record which of the two counts moves.
- EXPLAIN both page queries and compare rows-read plus the presence of a Sort or HashAggregate node above the join.
- Add (tag_id, resource_id), re-run the EXISTS probe, and record the plan change on the inner side.
Follow-up
- The filter changes from 'any of these tags' to 'all of these tags'. Rewrite it and state what it costs relative to the ANY form.
- A resource can be shared with the same user twice under different permissions. Does your count change, and should it?
- Where does the correct total come from when the tenant holds 4M resources and the header must not cost 200 ms?
Find version gaps and relay lag with window functions
outbox_event holds event_id, aggregate_type, aggregate_id, aggregate_version, event_type, payload, status ('pending','published','dead'), attempts, created_at, published_at. A projection is missing rows and you must decide whether the relay skipped events or the consumer dropped them. Write three queries over the last seven days: one listing every aggregate_id whose published aggregate_version sequence has a hole, one giving per-day counts with a running total, and one returning the newest published event per aggregate. For each, say where the window function is evaluated relative to WHERE and LIMIT. PostgreSQL 16.
Approach
- Gaps: compute lead(aggregate_version) OVER (PARTITION BY aggregate_id ORDER BY aggregate_version) in a subquery, then filter next_version <> aggregate_version + 1 in the outer query. Window functions are evaluated after WHERE, GROUP BY and HAVING and before the outer ORDER BY and LIMIT, so the predicate cannot sit in the same WHERE clause and PostgreSQL 16 has no QUALIFY.
- Say what the seven-day filter does to the answer: it truncates every partition, so the first row per aggregate has no predecessor inside the window and a hole spanning the boundary is invisible. Widen the window, or join to resource.version as the authority for the true maximum.
- Running total: SELECT date_trunc('day', created_at) AS d, count() AS n, sum(count()) OVER (ORDER BY date_trunc('day', created_at) ROWS UNBOUNDED PRECEDING). An aggregate inside a window call is legal because grouping runs before windowing. The grouping key is unique per row here so ROWS and RANGE agree, but write the frame anyway — over ungrouped rows with tied timestamps the default RANGE frame pulls in every peer row and the total jumps.
- Newest per aggregate: DISTINCT ON (aggregate_id) ... ORDER BY aggregate_id, aggregate_version DESC is the cheap PostgreSQL-only form when an index matches that order; row_number() OVER (PARTITION BY aggregate_id ORDER BY aggregate_version DESC) = 1 is the portable form and needs a subquery for the same evaluation-order reason as the gap query.
- Interpret rather than report: no gaps plus a normal p95 of published_at - created_at points at the consumer; gaps or a fat lag tail point at the relay; rows still 'pending' with attempts > 0 point at neither, because they never left the database.
- Be explicit that the partial index on (created_at, event_id) WHERE status = 'pending' does not serve any of these — they read published rows. Name the index a recurring monitor would need, and say why a query run twice a year may not deserve one.
Follow-up
- Relay failover redelivers events. Does a duplicate break the gap query, and how would you detect one from this table alone?
- Turn the gap check into a continuous monitor rather than a query someone runs after an incident. What does it watch?
- The consumer claims it never received event 4,812,006. What do you look at, in what order?
Specify the outbound webhook contract a customer endpoint can verify
Egress delivery sends resource.created, resource.updated and resource.archived to roughly 40k customer endpoints at about 1.5k deliveries/second, with a per-destination concurrency cap of 4 and a 10 second connect-plus-read timeout, at-least-once from the relay. The receiver is code you do not control, often behind a proxy that may re-encode JSON. Specify the payload envelope, how the receiver verifies authenticity and rejects replays, what ordering it may assume, how it deduplicates, which status codes it should return and what each means to us, and the retry, circuit and replay behaviour.
Approach
- Send the fact, not a pointer: event_id, event_type, aggregate_type, aggregate_id, aggregate_version, occurred_at and the payload copied from outbox_event. A receiver told only that resource 42 changed has to call back, and the call back returns a newer state than the event describes - that is precisely how a consumer applies changes out of order while believing it is following them.
- Sign the exact bytes on the wire: HMAC-SHA256 over the timestamp, a separator, and the raw body, in a header, compared in constant time before the body is parsed. Instruct receivers to verify the raw bytes, never a re-serialised copy, since a proxy that reorders keys or changes whitespace invalidates a signature computed over re-encoded JSON. Reject a timestamp outside a tolerance - five minutes is typical - and keep a short seen-set of event_ids, because a capture replayed inside the tolerance still verifies.
- Support key rotation by sending several signature values in one header during the overlap window and publishing that any one that verifies is sufficient. Without that rule a key rotation is a synchronised outage across every destination at once.
- State the guarantee as it actually is: at-least-once and unordered, including within a single aggregate_id. The outbox is ordered per aggregate at the source, but the relay holds up to 4 requests in flight per destination and backs off each retry independently, so a version 6 delivery that needs one retry lands after a version 7 that succeeded on its first attempt. Publishing per-aggregate ordering we do not enforce is worse than publishing none, because a receiver that trusts it overwrites new state with old. Receivers deduplicate on event_id and apply conditionally - UPDATE ... WHERE aggregate_version < :incoming, or the same comparison under a row lock on the aggregate - which discards stale redeliveries and stays correct when two deliveries for one aggregate are processed at the same time. A duplicate and an out-of-order delivery then have the same outcome: no-op.
- Define the response contract in the receiver's terms. 2xx means durably accepted, and accepting means writing it down - a receiver that does its processing inline inside our 10 second timeout will be retried while it is still working. 4xx is permanent and we stop. 429, 5xx and timeouts are retried with capped exponential backoff and full jitter within the per-destination concurrency cap, and a circuit opens after a run of consecutive failures and half-opens on a schedule, so a permanently dead endpoint costs one probe per interval instead of a growing queue.
- Give them a recovery path that does not involve us holding a queue for everyone: a visible parked state, and a replay endpoint keyed by event_id or time range, so a receiver that was down for two hours asks for the gap on its own schedule.
Follow-up
- A customer insists an event never arrived. What do you check, in order, and which table settles the argument?
- A receiver cannot store a version and asks us to deliver their events in order. What would the relay have to give up to offer that, and what does one failing event then do to the rest of their stream?
Convert the listing endpoint from offset pages to stable cursors
GET /v1/resources returns a tenant's resources newest-updated first, today with page and per_page, backed by index (tenant_id, status, updated_at DESC, resource_id DESC). Callers are a browser feed and a nightly sync job that walks every page. Users report items appearing twice or vanishing between pages, and page 400 is slow. Design the cursor contract: what the cursor contains and how it is encoded, the exact WHERE and ORDER BY, what happens when a row's updated_at changes mid-walk, how a client detects the end, and what the sync job does when a cursor is rejected.
Approach
- Separate the two defects, because they have different fixes. Cost: OFFSET n makes the engine produce and discard n rows, so price grows with page depth rather than page size and page 400 pays for 400 pages of work. Correctness: while the set shifts, rows cross the offset boundary and are skipped or repeated, and nothing in the response lets the client detect it.
- Write the seek: WHERE tenant_id = $1 AND status = $2 AND (updated_at, resource_id) < ($k, $id) ORDER BY updated_at DESC, resource_id DESC LIMIT n. The tie-break is not decoration - updated_at is not unique, and two rows sharing a timestamp across a page boundary reintroduce exactly the skip this was adopted to remove. PostgreSQL seeks the composite index on the row-value comparison directly; on an engine that does not optimise a row constructor, expand it into the equivalent OR form or the plan quietly degrades to a scan.
- Encode the cursor as an opaque token carrying the sort key, the id, and a fingerprint of the filter and sort order, signed or at minimum validated. A cursor replayed against a different sort or filter must be a 400 with its own code, not a silently wrong page - the sync job cannot notice the difference otherwise.
- State the guarantee precisely rather than generously. Keyset is stable against inserts and deletes elsewhere in the set, because the position is a value and not a count. It is not a snapshot: updated_at is mutable, so a row that is edited during the walk re-sorts and may be seen twice or not at all. If the sync job needs exactly-once coverage, order on an immutable key such as (created_at, resource_id), or walk resource_revision by revision_id and treat updated_at as data.
- Define termination and limits in the response, not in the client's inference: fetch n+1 rows, return n, and emit next_cursor only when the extra row existed. Absence of next_cursor is the sole end signal, because a page can legitimately come back short when rows are filtered after retrieval. Cap n and document the cap rather than honouring per_page=10000.
- Migrate without a flag day: keep page and per_page working, add the cursor, count usage per credential, and remove the offset path only once the sync job's traffic on it is zero.
Worked solution 25 min
- Write the old and new queries side by side and state the rows examined for page 400 under each.
- Define the cursor payload field by field, including the filter and sort fingerprint, and choose the encoding.
- Write the end-of-results rule and the cap, then the 400 response for a cursor that does not match the current query.
- Construct the mid-walk edit case: a row updated between page two and page three, and say exactly what the client sees.
- Write the deprecation plan for page and per_page, including the signal that says removal is safe.
Follow-up
- The client wants a total count and the ability to jump to page 400. What can you honestly offer instead, and what does each option cost?
- How do you paginate backwards, and what does that require of the index?
Listing latency scales with page size, not with filters
The tenant listing endpoint reads resource filtered by tenant_id and status, ordered by updated_at DESC, and returns each row plus the owner's display name from app_user and the actor of that resource's latest resource_revision. p99 is 55 ms at 10 rows per page and 1.4 s at 200. Database telemetry shows 401 statements per request, each under 1 ms, and nothing in the slow-query log. Diagnose the cause and give the fix, stating the statement count per request and the p99 you expect afterwards.
Approach
- Read the counters before forming a theory. 401 statements for 200 rows is one driver query plus two per row, and sub-millisecond execution with an empty slow-query log rules out a bad plan. The time is round trips, which is why it is invisible in every per-query metric and scales with rows returned rather than with filter selectivity.
- Name the two per-row statements from their normalised text: a single-row app_user lookup by user_id, and a resource_revision lookup by resource_id ordered by version DESC LIMIT 1. Confirm by dropping those two response fields and watching the statement count fall to one. That locates the calls in the serialisation layer, not the repository.
- Check that the arithmetic accounts for the whole gap. Measure one round trip to the replica in isolation; 400 trips at roughly 3 ms of network plus 0.2 ms of execution is about 1.3 s on top of a 55 ms baseline, which matches. If the multiplication had fallen short, the N+1 would only be part of the story and you would keep looking.
- Batch both lookups. Collect owner_user_ids and resource_ids from the driver query, then issue WHERE tenant_id = $1 AND user_id = ANY($2) for the users, and PostgreSQL's SELECT DISTINCT ON (resource_id) ... WHERE resource_id = ANY($2) ORDER BY resource_id, version DESC for the latest revision, which the UNIQUE (resource_id, version) index serves directly. On an engine without DISTINCT ON, use a lateral join or a row_number window. Three statements per request at any page size.
- Keep the tenant predicate in the batched query. The per-row version was implicitly scoped because its ids came from tenant-scoped rows; a batched user_id = ANY(...) with no tenant_id is an unscoped read that behaves correctly only as long as the id list is trustworthy.
- Re-measure at 10, 50 and 200 rows and confirm the statement count is constant. Latency should now track bytes returned.
Follow-up
- The page size is capped at 200 today. What breaks first if it is raised to 2,000, and is it still this bug?
- How do you stop the next N+1 from reaching production, given that no individual query is slow and the endpoint's tests pass?
- The latest-revision actor is only used to render an avatar. Make the case for denormalising it onto resource, and name the write anomaly that introduces.
Day one measures instead of guessing, under a fixed rubric, and the remaining hours are allocated in proportion to the gaps before any studying begins. The allocation is deliberately not renegotiated midweek, because the area that feels worst on day three is usually the one that is moving.
Prepare, practise & reflect
One practical outcome each day. Spend longer where you need it.
0 / 7 done01Diagnostic, scored before you study anything
- Sit a 110-minute diagnostic in four blocks: forty-five minutes on two coding problems, twenty-five on one design prompt taken to interface and data model, twenty of short-answer fundamentals, and twenty delivering two behavioural answers aloud.
- Score each block from 0 to 3 on a fixed rubric where 3 is correct and fluent, 2 is correct but slow or prompted, 1 is partially correct and 0 is stuck, grading the artifact rather than how the attempt felt.
- Allocate days two to five in proportion to 3 minus each block's score, write the allocation down, and commit to leaving it alone.
Deliverable: A scored rubric and a fixed hour allocation for the rest of the week.
Practice prompt ↗Practice prompt ↗Worked solution ↗02Largest gap: find the boundary rather than the subject
- Split the weakest area into named sub-skills and rate each separately. For coding those are restating the problem, choosing the structure, stating the invariant, turning the invariant into loop bounds, handling empty and single-element input, and accounting for complexity out loud.
- Attempt three items positioned just above where the rating drops off, and for each write the first move you failed to make.
- Re-attempt one of them from blank four hours later with nothing open.
Deliverable: A sub-skill map with the two blocking sub-skills circled.
Practice prompt ↗Practice prompt ↗03Drill the blocking sub-skill by repeating the shape
- Do eight short repetitions of the same shape rather than eight different problems, so what gets practised is the pattern and not the puzzle.
- State the rule you now hold in one sentence, then test it against a case built to break it, a sliding window over an array containing negative values, or a cache-aside read path whose invalidation message is dropped.
- Have someone else read your one-sentence rule and find the precondition you left out.
Deliverable: One rule statement with its preconditions attached and one counterexample that would have caught the incomplete version.
Practice prompt ↗Practice prompt ↗04Second gap, plus maintenance on the strongest area
- Run the same sub-skill decomposition on the second-largest gap in half the time.
- Spend twenty-five timed minutes on the block you scored highest, choosing the hardest item you can still finish rather than a warm-up.
- Write whether each area fails you on recall, on setup, or on execution, and set the fix accordingly: repetition for recall, a written checklist for setup, timed work for execution.
Deliverable: A second sub-skill map plus a one-line failure diagnosis for each area.
Practice prompt ↗Practice prompt ↗Worked solution ↗05The gap that is not a skill
- Record one technical and one behavioural answer, then count two things in the playback: seconds before your first clarifying question, and sentences you began without knowing where they would end.
- Practise saying that you do not know, followed by how you would find out, without letting it soften into a guess, and practise stating a complexity or an estimate before being asked for it.
- Redeliver one answer under a hard ninety-second cap, which forces structure ahead of detail.
Deliverable: Two recordings with a counted reduction in time-to-first-question.
Practice prompt ↗Practice prompt ↗06Retest under day-one conditions
- Sit the same 110-minute structure with new prompts of comparable difficulty and score it on the identical rubric.
- For any block that did not move, change the method rather than adding hours: a block stuck at 1 usually means the practice was too varied, not too short.
- Write down which single block you would still lose the offer on.
Deliverable: A second scored rubric placed beside the first, with one named remaining risk.
Practice prompt ↗07Full loop under interview conditions
- Run a sixty-minute mock over the two blocks that moved least, with an interviewer briefed to interrupt and change direction mid-answer.
- Write the recovery script for going blank: restate the question, state your assumption, name the first thing you would check.
- Say every rule from the week aloud without reading it, and cut any you cannot state in a single sentence, since a rule you have to reconstruct mid-answer will not survive an interruption.
Deliverable: A one-page card holding the recovery script and only the rules you could state from memory.
Practice prompt ↗Worked solution ↗Expand any day for tasks and deliverables. Your progress is saved on this device.
A migration is a cost you chose to pay, not an achievement. The story is what the old system made expensive, what you measured before committing, what kept serving traffic during the cutover, and what you would have done if the numbers had come back flat. Without those, a rewrite reads as taste.
Reverse your own decision and price the reversal
Describe a technical decision you made and later reversed. Pick one that cost something: a service you split and merged back, a cache you added and removed, an index you created that pushed the planner onto a worse plan, a projection you rebuilt from scratch. State what you believed when you decided, the measurement that changed your mind, how long the wrong version ran in production, and what the reversal cost in migrations, dual writes, and a deprecation window for callers you did not own.
Approach
- State the original rationale without irony, in the version you would still defend given what was known then. If it is not defensible, the story is about carelessness rather than judgement, and a different example serves you better.
- Give the measurement that moved with a before and after: the p99 that did not improve, the cache hit rate that sat at 40%, the plan that flipped to a sequential scan once the table passed a size you can name.
- Cost the reversal in steps, not adjectives: expand-and-contract deploys, the dual-write window, the callers who had to be notified, the rows already written in the wrong shape that had to be backfilled or abandoned.
- Distinguish reversal from rewrite by naming what you kept. Most good reversals preserve the schema or the interface and undo one decision inside it, which is also why they were affordable.
- Finish on the process change: the smallest experiment that would have produced the same measurement in a day, and why you did not run it the first time.
Follow-up
- What in that decision was irreversible, and did you know it was irreversible when you made it?
- How did you tell the people who had already built on top of the original decision?
- What do you now measure before committing to a change of this size?
Unblock an engineer without taking the keyboard
A teammate has spent two days on a job handler that occasionally writes duplicate rows. They are certain the queue is delivering twice by mistake. You suspect a lease expiring under a slow handler, so the job is running concurrently with itself. Describe how you have unblocked someone in this position: what you asked before offering a hypothesis, what you showed them rather than told them, and what you left them owning. Then say what you would do if their theory turned out to be the right one.
Approach
- Ask before diagnosing, and ask for things answerable from data they already have: the attempt count on the job rows that produced duplicates, the handler's observed duration against its lease expiry, and whether the duplicate rows share a natural key that a unique constraint could have caught.
- Teach the shape rather than the answer. A lease cannot distinguish a dead worker from a slow one, so a handler that outruns its lease is running twice by design, and deploys deliver the other half by killing handlers mid-run on every rollout. Both of their candidate theories produce identical duplicate rows, which is why the evidence has to come from timings rather than from argument.
- Hand over a checklist they execute: a natural key on every write the handler performs so the second copy collides rather than appends, the record of intent written before any external effect, a lease heartbeat while running, and the metric that shows it working.
- Keep ownership with them deliberately. Pair on the first write, then step back; if you finish it yourself you have closed one ticket and left the same person stuck on the next redelivery.
- Close on the systemic gap that let two days pass, which is usually a missing dashboard for attempt counts or an undocumented at-least-once contract, and fix that rather than only the bug.
Follow-up
- How would you distinguish a genuine double-delivery from a lease expiry using only the data already stored?
- Their handler calls an external endpoint before recording that it did. What do you tell them to change first?
- What do you do the third time the same person brings you the same class of bug?
Argue against a design, lose, and commit anyway
Describe a design you argued against and lost. State the failure you predicted as a named mechanism, not a feeling about complexity: two services that would need one transaction, a projection with no rebuild path, a write path with no idempotency key. Say what evidence you brought, what the decision maker weighed instead, and what you did after the decision was made: what you instrumented, what you wrote down, and whether the prediction came true. Five minutes.
Approach
- State the prediction in falsifiable form up front: the mechanism, the condition that triggers it, and the observable outcome. A prediction that cannot be checked also cannot be credited to you later.
- Show the evidence you had at the time and label each piece honestly as measured, analogous, or intuition. Keeping the intuition is fine; disguising it as data is the thing that erodes your standing in the next argument.
- Represent the opposing case at full strength, including the constraint you did not control: a fixed date, a team boundary, or the fact that the decision was cheap to reverse and yours was not.
- Make disagree-and-commit concrete. Name the artefact you left behind so the prediction could be settled without you: the alert and its threshold, the counter on the dashboard, the decision note that recorded the trade-off and the condition that would revisit it.
- Report the outcome without editing it. If the design held and your predicted mechanism never fired, say so and say what you had mis-weighted, which is more persuasive than a vindication story.
Follow-up
- What threshold on that alert would have proved you right, and did anyone ever look at it?
- If the same proposal arrived tomorrow with the same deadline, would you argue it the same way?
- How did you behave toward the design once it shipped and started failing in a different way than you predicted?
- 01
Describe a technical decision you made and later reversed. Pick one that cost something: a service you split and merged back, a cache you added and removed, an index you created that pushed the planner onto a worse plan, a projection you rebuilt from scratch. State what you believed when you decided, the measurement that changed your mind, how long the wrong version ran in production, and what the reversal cost in migrations, dual writes, and a deprecation window for callers you did not own.
- 02
A teammate has spent two days on a job handler that occasionally writes duplicate rows. They are certain the queue is delivering twice by mistake. You suspect a lease expiring under a slow handler, so the job is running concurrently with itself. Describe how you have unblocked someone in this position: what you asked before offering a hypothesis, what you showed them rather than told them, and what you left them owning. Then say what you would do if their theory turned out to be the right one.
- 03
Describe a design you argued against and lost. State the failure you predicted as a named mechanism, not a feeling about complexity: two services that would need one transaction, a projection with no rebuild path, a write path with no idempotency key. Say what evidence you brought, what the decision maker weighed instead, and what you did after the decision was made: what you instrumented, what you wrote down, and whether the prediction came true. Five minutes.
Is this an official valantic interview guide?
No. It is PracHub's own research and practice material for the Software Engineer role at valantic. Rounds and questions reflect what candidates have reported, not a process valantic has published, and they change over time. Confirm the current format and scope with your recruiter.
PracHub interview research ↗How difficult are the technical interviews?
They are designed to be challenging but fair. The focus is on your problem-solving process and your ability to apply technical knowledge to real-world scenarios.
PracHub interview research ↗How much time should I spend preparing?
Preparation time varies by individual, but dedicating time to practice coding problems and reviewing your own past projects is highly recommended.
PracHub interview research ↗What is the company culture like?
Valantic fosters a professional and collaborative environment. They value engineers who are proactive, curious, and eager to learn from senior team members.
PracHub interview research ↗Is the interview process the same for everyone?
While there is a standard structure, the specific technical questions may vary depending on the team you are interviewing for and your seniority level.
PracHub interview research ↗Sources & methodology 3 sources ↗
No official company page is cited. Rounds and questions come from candidate reports and PracHub editorial material; each source shows the date it was read.
- 01PracHub interview research ↗
PracHub editorial research into this company and role, maintained with this guide. Candidate-reported, not an employer publication.
PracHub page · Accessed 2026-09-22 - 02PracHub Software Engineer practice ↗
Cross-company practice questions for this role.
PracHub page · Accessed 2026-09-22 - 03PracHub interview preparation framework ↗
The framework the preparation plan follows.
PracHub page · Accessed 2026-09-22
Explore related engineering environments and compare the preparation focus.
SIG (Susquehanna) Software Engineer Interview Questions & Guide 2026
Database practice for SIG (Susquehanna) candidates: how an index changes a query plan, and which anomalies survive a given isolation level, since read committed still permits non-repeatable reads.
AbsenceSoft Software Engineer Interview Questions & Guide 2026
What AbsenceSoft asks Software Engineer candidates, from reported rounds and questions.
Ziphq Software Engineer Interview Guide
Data structures and algorithms practice for Ziphq candidates, where stating a bound means stating its precondition: constant-time hash lookup is an average case over keys that spread.
Airwallex Software Engineer Interview Guide
Failure-handling practice for Airwallex software engineer candidates: requests whose outcome a timeout leaves unknown, where a retry is safe, and deduplicating at the receiver instead of assuming exactly-once delivery.