This guide covers what a Data Scientist at Virtusa is expected to do and how to prepare for the interview.
Online Technical Assessment
reportedBefore anything else, this round is a reading test. You are given a small schema and a question phrased in business language, and most of the difficulty sits in the gap between them. Who counts as an active user, does a refunded order still count as an order, is that date column an event time or a load time. Weak answers start typing immediately and compute something precise about the wrong population. Strong ones pin the definition in one sentence, name the column that encodes it, then write the query. On a timed assessment with nobody to tell, write the definition in a comment anyway.
What to demonstrate
- Whether an ambiguous term becomes a specific column and filter before any computation happens
- Whether you read the schema for keys and cardinality rather than only for column names
- Whether the result answers the question at the grain it was asked at, per user or per session or per day
How to prepare
- Take three metrics you already use and write down the exact filter and exact grain behind each, then practise stating one of them in a single sentence out loud
- On a schema you have never seen, spend the first minute writing what one row of each table means and which key it is unique on, then predict which joins can duplicate rows
- Rehearse a version where the definition changes halfway through, and edit the query you have instead of starting over
Technical Interviews
reportedThis round decides whether someone can hand you a schema and a question and trust the number that comes back. Correctness under a clock is the bar, not clever syntax. The habit that separates strong from weak answers is checking the grain: after every join, know how many rows you expect and whether the count moved. Most wrong answers in this format are not wrong logic, they are a fan-out from a key that turned out not to be unique, or a filter applied before an aggregate when it belonged after. Say what you expect before you run it.
What to demonstrate
- Whether your row counts survive each join, and whether you notice on your own when they do not
- Deliberate handling of rows that fail to match, including whether the question needs an inner join or a left join with the non-matches kept and counted
- Whether NULLs are treated on purpose, given that a NULL compares equal to nothing and that COUNT of a column skips it
- Reaching a defensible answer inside the window instead of a refined one after it
How to prepare
- Take a two-table schema, write a join that fans out on purpose, then fix it by collapsing the many-side to one row per key before joining. Repeat until the fix is reflex rather than recall.
- Write a funnel as one query and print the distinct user count at each stage, then confirm each stage is a subset of the one above it rather than assuming it
- Do a few timed runs in a plain text box with no autocomplete and no formatter, since assessment editors often have neither
Behavioral/HR Round
reportedBehavioural answers from data candidates get audited in a way that answers from other roles do not. When you say a model lifted retention, the next question is the denominator, the window, and how you knew the lift was not seasonal. So attach the measurement to each claim while you tell it: what the metric was before, over what period, and against what comparison. Numbers with no baseline read as rounded-up memory, and one unsupported figure tends to make the rest of the story sound rehearsed.
What to demonstrate
- Whether each impact number arrives with a baseline, a window and a comparison, or as a bare percentage
- Whether you can name the method that attributed the effect to your work (an experiment, a staged rollout, a seasonal control) or concede the link was correlational
- Whether the magnitudes stay internally consistent when the interviewer multiplies them against the scale you described earlier
How to prepare
- For each story, write the impact line as metric, value before, value after, window, and how attribution was established. Any line missing two of those five is a follow-up you will answer badly.
- Re-derive one headline number from the source table rather than the deck that reported it. Resume numbers drift upward across retellings.
- Decide in advance which figures you cannot share, and prepare the ratio or relative change you can give instead, so a confidentiality limit does not read as evasion.
PracHub editorial advice for the preparation topics above.
Treating last-touch attribution as the causal value of a channel
The attribution label on dim_user is the output of a rule that assigns full credit to whichever touch happened to be recorded last inside a lookback window, and that rule systematically rewards channels that sit close to the conversion, especially branded search and retargeting, which largely intercept demand that already existed. Reallocating spend on those labels moves budget toward the channels that are best at being last, which is why attributed return on ad spend often improves while total signups do not. Nothing in the touchpoint data can settle this, because the counterfactual of not running the channel was never observed. The credible reads are a geo holdout or a scheduled pause, sized in advance on the total-signups metric rather than on the attributed one, and the honest framing in the meantime is that the label describes correlation with conversion and not incremental contribution.
Reading a pooled rate that moved because the mix moved, not because any behaviour changed
A pooled conversion rate is a weighted average, and a shift in the weights can move it in the opposite direction to every one of its parts. A paid campaign that brings low-converting traffic drops overall signup conversion even if desktop, mobile web and app conversion each rose that week, which is Simpson's paradox and it is the single most common cause of an inexplicable dashboard move. The discipline is to decompose before explaining: recompute the rate holding last period's segment weights fixed, and compare that counterfactual to the actual, so the mix effect and the rate effect are separated numerically rather than argued about. Segment on the dimensions that actually reweight, which in this domain are almost always device_type, referrer_channel, country and new versus returning.
Building features from data that postdates the prediction time
Check every feature against the timestamp at which the model would actually score, and drop anything computed from a window that includes or follows the label event. For a forecasting use case, split train and test by time rather than at random, and split by entity when the same entity recurs.
Extrapolating a first-week lift inflated by novelty effects
Plot the treatment effect by days since first exposure instead of quoting one pooled average. A lift that decays toward zero across the test window is behaviour that will not persist, and annualising it produces a forecast that misses by an order of magnitude.
Choose a category, try a prompt, then open its approach, worked solution or follow-up when you need it.
Explain the difference between correlation and causation in the contex…
Explain the difference between correlation and causation in the context of user behavior.
Approach
- Say what the estimate is of, and over what population it generalises.
- Sanity-check the answer against a simple bound or a simulated case.
- Quantify uncertainty explicitly rather than reporting a point estimate alone.
Follow-up
- What sample size would you need to detect an effect half this size?
- How would you explain this result to someone who does not know statistics?
Implement seven-day activation from its written definition
Implement the seven-day activation rate. Inputs: dim_user with user_id, account_created_at_utc and is_internal; fct_event with user_id, occurred_at_utc and is_core_action. A user activates when core-action events carrying a non-NULL user_id fall on at least two distinct UTC dates inside [account_created_at_utc, account_created_at_utc + 7 days). The denominator is every non-internal user whose account_created_at_utc lands in the cohort week, including users with no events at all. Return one row per cohort week with numerator, denominator and rate, publishing only weeks whose last signup is at least eight days old.
Approach
- Build the denominator first, from dim_user alone, filtered on is_internal = False. Deriving it from the join is the standard way to lose every user who never fired an event, which is exactly the population the metric is about.
- Join events to users on user_id with a left join from the user side, then apply the window as a half-open interval: occurred_at >= created AND occurred_at < created + 7 days. The right bound is exclusive, so an event at exactly created + 7 days does not count.
- Count distinct UTC dates per user, not distinct events. Floor occurred_at_utc to date before the nunique, and do it in UTC rather than local time so the threshold does not move with the user's country.
- Apply the >= 2 threshold, aggregate to cohort week, and compute the rate by re-summing numerator and denominator per week rather than averaging any per-user or per-day rate. Fix the week anchor explicitly: cohort_week is the Monday of the signup week in UTC, which is what Postgres DATE_TRUNC('week') returns and what any SQL version of this metric will produce. In pandas, subtract dt.weekday days from the floored timestamp. If you reach for periods instead, the anchor that matches is to_period('W') (equivalently 'W-SUN'), whose weeks end Sunday and therefore start Monday; to_period('W-MON') labels weeks that end on Monday, so it runs Tuesday through Monday and its start_time is a Tuesday. Mixing the two shifts every cohort label by one day and silently moves Mondays into the previous week.
- Suppress immature weeks: drop any cohort week whose maximum account_created_at_utc is within 8 days of the data cut, and return them as absent rather than as a partial number.
Worked solution 30 min
- users = dim_user[~dim_user.is_internal].copy(); created = users['account_created_at_utc']; users['cohort_week'] = created.dt.floor('D') - pd.to_timedelta(created.dt.weekday, unit='D'), which is the Monday-start week. The period spelling that agrees with it is created.dt.to_period('W').dt.start_time; 'W-MON' does not agree and is off by a day.
- ev = events[events.is_core_action & events.user_id.notna()]; merge onto users on user_id with how='inner' for the numerator side only.
- Filter to the half-open window, add ev_date = occurred_at_utc.dt.date, group by user_id and count distinct dates, keep users with >= 2.
- numer = users.merge(activated_user_ids, how='left', indicator=True) then group by cohort_week and sum the indicator; denom = users.groupby('cohort_week').size().
- rate = numer / denom; drop weeks where users.groupby('cohort_week')['account_created_at_utc'].max() > data_max - 8 days.
Follow-up
- The threshold is 2 distinct days. What changes in the reported history if someone moves it to 3, and how would you publish that change?
- Invited seats and SSO-provisioned users have no pre-signup session. Should they be in this denominator at all, and what does including them do to the rate for sales-assisted accounts?
- How would you produce the same metric at account grain, and which of the two would you put on the dashboard?
Permutation test for a difference in conversion rates
Write a two-sided permutation test from scratch for a difference in conversion rates, using no scipy hypothesis function. Input: a DataFrame with unit_id, variant in {control, treatment} and converted in {0,1}, one row per randomisation unit. Compute the observed difference in proportions, then build the null distribution by reshuffling the variant labels while holding each arm's size fixed. Report the p-value as (1 + the count of permuted statistics at least as extreme in absolute value) / (B + 1) with B at least 10,000, and return the permutation distribution.
Approach
- Name the null being tested: the sharp null that each unit's outcome is the same under either label. That is what licenses permuting labels, and it is stronger than the null of equal means, which matters when someone asks whether the test is valid under unequal variances.
- Extract converted to a single numpy array of 0s and 1s and record n_treatment. Every permutation is then just a reshuffle of one array, and the treatment mean is the mean of the first n_treatment entries of the shuffled array.
- Vectorise the B permutations with rng.permuted on a tiled 2-D array, or with argsort of a (B, n) random matrix. A Python loop calling np.random.shuffle B times is correct but roughly an order of magnitude slower and often runs past the time limit.
- Use the +1 correction in both numerator and denominator. Without it a p-value of exactly 0 is reportable, which is false: the observed labelling is itself one of the permutations, so the smallest attainable p-value is 1/(B+1).
- Compare the resulting p-value against a two-proportion z-test as a sanity check. At these sample sizes they should agree closely; a large divergence means the statistic or the shuffle is wrong, not that the permutation test found something subtle.
Follow-up
- The arms are 200 and 20,000 units. Does the permutation test stay valid, and what happens to its resolution at B = 10,000?
- Give a 95 percent confidence interval for the difference. Can you get it from this permutation distribution, and if not, what would you run instead?
- The randomisation unit is user_id but the outcome is per session. What breaks, and what is the fix?
Given two tables, how would you write a query to identify users who pe…
Given two tables, how would you write a query to identify users who performed an action in one table but not the other?
Approach
- Handle the rows that do not match: a LEFT JOIN with a NULL check is usually the question.
- Check whether any join is one-to-many before aggregating, or the sums inflate.
- Say which table is the grain you start from, and join outward from it.
Follow-up
- How does the query change if the join becomes one-to-many?
- How would you verify this result without re-running the same query?
Can you explain when you would use SQL window functions versus a GROUP…
Can you explain when you would use SQL window functions versus a GROUP BY clause?
Approach
- State the window function and its partition and ordering out loud before writing it.
- Compute rates by summing numerator and denominator separately, never by averaging rates.
- Say which table is the grain you start from, and join outward from it.
Follow-up
- How does the query change if the join becomes one-to-many?
- How would you verify this result without re-running the same query?
Find reactivation gaps in account paid-period history
fct_subscription_period holds account_id, subscription_id, period_start_utc, period_end_utc, period_status and change_reason. A mid-period plan or seat change closes one row and opens another, so a single continuous paid tenure is often many rows, and an account may hold two overlapping subscriptions. Collapse rows with period_status in ('active','past_due') into continuous tenures per account, treating gaps of three days or less as continuous. Return account_id, tenure_start, tenure_end, and for every tenure after the first, the gap in days that preceded it.
Approach
- Filter to paid rows only: period_status IN ('active','past_due'). Trialing periods are not tenure, and including them turns every trial that never converted into a one-period tenure followed by a fake churn.
- Order by period_start_utc and take a running maximum of all prior ends: MAX(period_end_utc) OVER (PARTITION BY account_id ORDER BY period_start_utc, period_end_utc, subscription_id ROWS BETWEEN UNBOUNDED PRECEDING AND 1 PRECEDING). Those three columns are the only stable ordering this schema exposes, so check first that they are unique within an account; if rows tie on all three, the island numbering is order-dependent between runs and you need a real row key before the result is reproducible.
- LAG on its own is wrong here because with overlapping or nested periods the immediately preceding row by start date is not the one that ends latest, so the running maximum is the part that cannot be shortcut.
- Flag a new island when prior_max_end IS NULL OR period_start_utc > prior_max_end + interval '3 days', then number islands with a running SUM of the flag over the same ordering and an explicit ROWS frame.
- Group to (account_id, island) taking MIN(period_start_utc) and MAX(period_end_utc), then LAG(tenure_end) OVER (PARTITION BY account_id ORDER BY tenure_start) to compute the preceding gap in days for every tenure after the first.
- Sanity-check with change_reason, which is the only lineage this schema carries: list its distinct values first, then confirm that rows recording a plan or seat change sit inside a tenure rather than opening one, and that every tenure after the first opens on a row whose reason records a restart rather than an ordinary renewal. Do not reconcile against a churn timestamp on dim_account, which this schema does not define; and where such a column does exist, a cancellation timestamp records when the request was made and routinely sits weeks before the period it ends.
Worked solution 35 min
- Find an account with a known mid-period upgrade and dump its period rows to use as the trace case.
- Check that (period_start_utc, period_end_utc, subscription_id) is unique per account, since the whole ordering rests on it.
- Write the paid-rows CTE and the running MAX with the explicit frame.
- Add the island flag and the running SUM, then verify the trace account yields one island.
- Group to tenures and add the LAG-based gap in days.
- List the distinct change_reason values, then count accounts with more than one tenure and compare against the count of accounts carrying a restart-flavoured reason anywhere in their history.
Follow-up
- Why three days of grace? What do 0 and 30 days each do to the count of accounts classed as reactivated?
- An account runs two concurrent subscriptions for different teams. One tenure or two, and what does the revenue reader expect?
- How would you turn these tenures into a monthly gross logo churn series without double-counting an account that churned and returned in the same month?
If a key product metric suddenly drops by 10%, how would you investiga…
If a key product metric suddenly drops by 10%, how would you investigate the root cause?
Approach
- Fix the population and the time window before naming any metric.
- Decompose the metric into the rates that drive it, and say which one you would check first.
- Restate the decision this analysis has to support, and who acts on the answer.
Follow-up
- How would you detect that the metric is being gamed rather than genuinely improving?
- What would you do if the primary metric and the guardrail moved in opposite directions?
How do you determine if a lift in a metric is statistically significan…
How do you determine if a lift in a metric is statistically significant?
Approach
- Name one primary metric, then the guardrail that stops it being gamed.
- State what result would change your recommendation, so the answer is falsifiable.
- Decompose the metric into the rates that drive it, and say which one you would check first.
Follow-up
- What would you do if the primary metric and the guardrail moved in opposite directions?
- How would you detect that the metric is being gamed rather than genuinely improving?
How would you define the success metrics for a new feature launch?
How would you define the success metrics for a new feature launch?
Approach
- Restate the decision this analysis has to support, and who acts on the answer.
- Decompose the metric into the rates that drive it, and say which one you would check first.
- Fix the population and the time window before naming any metric.
Follow-up
- What would you do if the primary metric and the guardrail moved in opposite directions?
- How would you detect that the metric is being gamed rather than genuinely improving?
What is the significance of the Central Limit Theorem in A/B testing?
What is the significance of the Central Limit Theorem in A/B testing?
Approach
- Name the guardrails that would stop a launch even on a positive primary result.
- State the primary metric and the minimum effect worth shipping, then size the test.
- Name the randomisation unit first; it decides the variance and what the test can detect.
Follow-up
- What would you conclude if the result is positive but the test is underpowered?
- How would you handle interference between treated and control units?
How do you design an A/B test to measure the impact of a change in use…
How do you design an A/B test to measure the impact of a change in user interface?
Approach
- State the primary metric and the minimum effect worth shipping, then size the test.
- Name the guardrails that would stop a launch even on a positive primary result.
- Say whether units interfere with each other, and switch design if they do.
Follow-up
- How would you handle interference between treated and control units?
- What would you do if you could not randomise at all?
A surrogate for twelve-month value inside a three-week test
A monetisation change — an earlier and harder paywall — will be tested for three weeks. The decision quantity is twelve-month cumulative net revenue per acquired account, which cannot be observed in three weeks. Available: fct_event, fct_session, fct_subscription_period (mrr_cents_constant_fx, period_status, change_reason, is_first_paid_period), dim_account, and fct_experiment_exposure (unit_type, unit_id, variant, first_exposed_at_utc, is_in_analysis_population). Construct a surrogate index readable at three weeks, state the assumption that makes it valid, name the mechanism that breaks it, and give the pre-registered rule for refusing to decide. Deliverable: the index, the assumption, and the refusal rule.
Approach
- State the surrogacy condition before building anything: a surrogate is valid only if the treatment's entire effect on twelve-month revenue runs through it. Then say where it fails here, because a paywall moves short-run revenue directly and long-run revenue through churn and through who becomes a payer at all.
- Fit the index on history rather than on intuition: regress twelve-month cumulative net revenue per account on features observable by day 21 — first-paid flag, activation days, week-3 core-action days, seats billed — using cohorts old enough to have a twelve-month outcome, and hold out a later cohort.
- Report the out-of-sample fit as the headline rather than the point estimate: the held-out R-squared and the calibration of predicted against actual deciles are what license any use of the index, and a decile plot catches the mis-calibration an R-squared hides.
- Name the bias direction explicitly: the relationship was estimated under the old paywall, so under a harder paywall the marginal payer is a different person and the index over-predicts their value, biasing the treatment arm optimistic.
- Surround the index with the direct three-week readouts it cannot contain — revenue per exposed unit, cancel-within-first-period rate, and the free-side signup and activation counts — and pre-register a numeric refusal rule, because the failure mode of a surrogate is being used confidently in exactly the case it was not fit for.
Worked solution 40 min
- Assemble the training set: accounts with first_paid_at_utc at least twelve months old, their realised twelve-month cumulative net revenue, and the day-21 features.
- Fit on pre-change cohorts, evaluate on a held-out later cohort, and report both out-of-sample R-squared and predicted-versus-actual decile calibration.
- Write the surrogacy assumption as a falsifiable sentence, then write the specific mechanism in this treatment that violates it.
- Specify the direct arm readouts on fct_experiment_exposure with is_in_analysis_population = TRUE: revenue per exposed unit, cancel-within-first-period rate, and free-side signup and activation counts.
- Write the refusal rule with numbers attached, covering both the fit threshold and the free-side divergence case.
Follow-up
- What evidence would make you trust a surrogate for this particular change rather than a different one?
- The index reads plus 8 percent while three-week cancel-within-period is up. Which do you act on, and what do you tell the decision-maker?
- How would you size this test, on what unit, and what does that do to the three-week horizon?
Tell a pipeline outage from a collapse in usage
Weekly active accounts completing a core action fell 9%, and almost the entire fall sits in accounts whose events carry surface = 'ios'. App crash rates and store reviews are unchanged. You have fct_event with occurred_at_utc, received_at_utc, event_name, is_core_action, app_version and surface, plus fct_session and the ingestion job run log. Establish within the hour whether iOS engagement fell or iOS events stopped arriving, name the evidence that distinguishes them, and say what you would publish on the dashboard in the meantime.
Approach
- Compare the event-name composition inside surface = 'ios' against the prior four weeks as shares, not counts. A behaviour collapse scales most event names together; a dropped event definition or a broken downstream filter hits specific event_name values while page_view and session-opening events hold steady. That shape difference is the fastest discriminator available.
- Profile the received_at_utc minus occurred_at_utc distribution per day for surface = 'ios'. A stalled-then-backfilling pipeline shows a fat upper tail and a recovering p99; a silently dropped stream shows an unchanged lag distribution over a smaller volume. The two failure modes have different remedies and different histories.
- Cut by app_version. A logging SDK change arrives with one build and ramps with its adoption curve; an infrastructure fault arrives across every build within the same hour. Checking this costs one group-by and rules out half the hypothesis space.
- Cross-check against a signal that does not travel the suspect path: server-emitted events with session_id NULL, and subscription or billing activity for the same accounts. If those accounts are still transacting, the users did not leave.
- Publish an ex-iOS total with an explicit annotated break rather than a blended total. A blended number during a known ingestion gap is wrong in a direction you can already name, and republishing it daily spreads the artefact into every downstream report.
Follow-up
- Suppose the events do eventually backfill. What is your policy for restating the published weekly numbers, and who needs to be told?
- What monitor would have caught this before a human noticed the weekly metric, and what would it alert on?
- If is_core_action is maintained in the tracking plan, what governance would stop a change to that list from silently moving a north-star metric?
For someone who can already write the query and train the model but stalls when asked what to measure or whether a change is worth making. Metric definition and case structure come first; the technical work is kept as maintenance rather than the centre of the week.
Prepare, practise & reflect
One practical outcome each day. Spend longer where you need it.
0 / 7 done01Metric anatomy
- For three products you use daily, write one primary metric, two input metrics that plausibly move it, and one guardrail that would catch a cheap way of moving the primary at the cost of the product.
- For one of them, specify the metric precisely enough that two analysts would return the same number: numerator, denominator, unit of observation, time window, and how returning and deleted accounts are treated.
- Pick a ratio metric and write what happens to it when the denominator shrinks for reasons unrelated to the numerator, with a concrete example of that happening.
Deliverable: A one-page metric tree for one product, with the primary metric written as an unambiguous spec.
Practice prompt ↗Practice prompt ↗Practice prompt ↗Worked solution ↗02Diagnosing a drop without guessing
- Take the prompt "weekly active users fell 8 percent week over week" and write the segmentation plan before proposing any cause: platform, region, tenure cohort, acquisition channel, and whether the movement sits in the numerator or in a changed denominator.
- List the instrumentation failures that manufacture fake drops (a client release that stopped firing an event, a bot filter change, a shifted date boundary or timezone) and write the query that rules out each one.
- Rehearse stating the boring explanations first, seasonality and day-of-week composition, before reaching for a product cause.
Deliverable: A drop-diagnosis checklist short enough to recite from memory in under a minute.
Practice prompt ↗Practice prompt ↗Practice prompt ↗03Should we build it
- Take a feature idea and write it as a bet: what you believe is true, what would have to be true for it to pay off, the metric that would confirm it, and the effect size that would justify the engineering cost.
- Size the opportunity top-down and bottom-up, then reconcile the two numbers in writing instead of quoting whichever is friendlier.
- Write the counter-metric that would make you kill the feature even if it wins on the primary metric.
Deliverable: A one-page product memo ending in a decision rather than a list of considerations.
Practice prompt ↗Practice prompt ↗04The places aggregate numbers lie
- Construct a Simpson's paradox numerically: two segments where the treatment wins within each segment yet loses overall, and identify the shift in segment weights that causes it.
- Take a heavy right-tailed quantity such as revenue per user and write why the mean is the wrong summary, which percentile you would report instead, and what a moving mean with a stable median tells you.
- Write your definition of a session for the product from day one, then name two real behaviours it misclassifies.
Deliverable: One page holding a worked Simpson's paradox table and a session definition with its two known failure cases.
Practice prompt ↗Practice prompt ↗Worked solution ↗05Technical maintenance, aimed at metrics
- Solve four timed SQL prompts that all end in a ratio metric, so the question of grain stays live in every answer.
- Compute a 95 percent confidence interval for a proportion on a small sample, and state why the normal approximation is unreliable when either np or n(1 minus p) falls below roughly 10, along with which interval you would use instead.
- Take one metric from your day-one tree, write the query that computes it correctly, then write the query that computes it wrong in the most plausible way and explain how you would notice.
Deliverable: Four solved prompts plus a matched correct and plausible-wrong query for one metric.
Practice prompt ↗Practice prompt ↗06Turning engineering work into data science stories
- Write three project stories as situation, decision, trade-off, outcome, each carrying one number and one thing you got wrong.
- For the story you will lead with, prepare an answer to "what would you do differently" that names a decision you made, not a constraint you were handed.
- Practise the sentence that reframes a systems project as a question project: the question the work answered, ahead of the pipeline it shipped.
Deliverable: Three written stories with the lead story delivered aloud and timed under four minutes.
Practice prompt ↗Practice prompt ↗07Mock case and gap list
- Run a 40-minute mock case with someone playing a product manager who pushes back on your metric choice, and record it.
- Listen back and mark every moment you proposed a solution before the success metric existed.
- Rewrite those moments as the question you should have asked, and rehearse the first 90 seconds of the case until scoping comes before solving.
Deliverable: A recorded case plus a rewritten opening 90 seconds.
Practice prompt ↗Practice prompt ↗Worked solution ↗Expand any day for tasks and deliverables. Your progress is saved on this device.
Sometimes the honest read is that the initiative did not work, and the person who commissioned the analysis was hoping otherwise. Interviewers want to know whether you softened it. Prepare the case where you delivered an unwelcome result, how you presented the uncertainty without hiding behind it, and what the team did next.
How would you explain the concept of a p-value to a non-technical stak…
How would you explain the concept of a p-value to a non-technical stakeholder?
Approach
- Name the disagreement or constraint, and how you resolved it with evidence.
- State the situation in two sentences and spend the rest on your reasoning.
- Close with what you would do differently, concretely.
Follow-up
- How did you know the outcome was caused by your change?
- What did you decide not to do, and why?
Walk through an analysis you got wrong and what changed
Describe an analysis of yours that turned out to be wrong after somebody had already acted on it. You have four minutes. The account must name the defect mechanically, the join, the filter, the window or the identity key, rather than describing it as a communication problem. It must also say who did what because of the wrong number, how the error surfaced, how long it stood, and what control you put in place so that class of error cannot reach a decision again. Do not pick an error nobody acted on.
Approach
- Recognise what is being probed: whether you can be specific about your own failure without minimising it or performing contrition. The discriminator is whether the defect has a mechanism the listener could reproduce in their own warehouse.
- Choose the case by blast radius rather than by comfort. An error nobody acted on tests nothing, and picking one signals that you are managing the interview instead of answering it.
- Structure the account in six beats: the number, the decision it drove, the defect, the detection, the correction, the control. Keep the defect to one reproducible sentence, for example an inner join to fct_subscription_period that dropped accounts with no subscription row and so computed retention over payers only.
- State the direction of the bias, not only its existence. A filter or join that removes rows usually moves a metric predictably, and knowing which way shows you diagnosed the mechanism rather than patched the symptom.
- Be exact about detection and elapsed time. 'A colleague noticed' and 'the row-count assertion failed before publication' are different answers about the same organisation, and the second one is the one your control is supposed to produce next time.
- End on the control, its cost, whether it has fired since, and one thing it does not cover.
Follow-up
- What did the control cost, and has it fired since? If it never has, how do you know it works?
- How long did the wrong number stand before anyone questioned it, and what does that say about the review path it went through?
- What is the equivalent mistake you are most likely to make in this role, given the tables you would be working in?
Defend a flat experiment readout against a post-hoc segment
A feature you evaluated is flat on seven-day activation: +0.05pp with a 95% interval of [-0.47pp, +0.57pp], from 61,000 exposed users per arm in fct_experiment_exposure joined to dim_user and fct_event. Baseline activation is 32%. The launch team asks you to drop every surface except mobile_web, where the point estimate is +1.1pp, and re-run. You have ten minutes in their planning meeting. Deliver a spoken position: what you will and will not do, and the decision you recommend.
Approach
- Recognise what is being probed: whether you hold a statistical position under social pressure without becoming either rigid or apologetic. A generic answer says the segment is not significant; a strong one separates the request into a question that is answerable (is the mobile_web number real?) and one that is not (can we ship on it?), and answers both.
- Price the multiplicity out loud. The slice was chosen after seeing the results, so its estimate is selected on favourable noise and is biased away from zero. With k independent looks at a nominal 5% level, the chance of at least one false positive is 1 - 0.95^k: 26% at six segments, 64% at twenty. Quote the k you actually inspected, not the k you reported.
- Use the arithmetic already in front of you. On the point estimates, a +1.1pp mobile_web effect combined with a pooled +0.05pp implies the remaining surfaces average negative in proportion to mobile_web's share of exposures. State that as a testable implication of their story rather than as a rebuttal of it.
- Ask the one question that settles the category: was mobile_web named in the analysis plan before launch? If it was, it is a planned comparison and gets a corrected reading. If it was not, it is a hypothesis, and the honest move is to size the test that would confirm it.
- Convert the refusal into a cost. Size a mobile_web-only confirmatory test at the claimed effect, state the weeks of mobile_web traffic it needs, and close with the recommendation: do not ship this as a lift, and note that the interval already rules out anything at or above +0.6pp, which is itself a useful input to the roadmap.
Follow-up
- The confirmatory test you sized needs nine weeks of mobile_web traffic and the team has three. What do you recommend instead?
- Suppose mobile_web was pre-registered. How does your reading change, and what correction do you apply?
- Your interval excludes +0.6pp. Is that the same as saying the feature does nothing?
- 01
How would you explain the concept of a p-value to a non-technical stakeholder?
- 02
Describe an analysis of yours that turned out to be wrong after somebody had already acted on it. You have four minutes. The account must name the defect mechanically, the join, the filter, the window or the identity key, rather than describing it as a communication problem. It must also say who did what because of the wrong number, how the error surfaced, how long it stood, and what control you put in place so that class of error cannot reach a decision again. Do not pick an error nobody acted on.
- 03
A feature you evaluated is flat on seven-day activation: +0.05pp with a 95% interval of [-0.47pp, +0.57pp], from 61,000 exposed users per arm in fct_experiment_exposure joined to dim_user and fct_event. Baseline activation is 32%. The launch team asks you to drop every surface except mobile_web, where the point estimate is +1.1pp, and re-run. You have ten minutes in their planning meeting. Deliver a spoken position: what you will and will not do, and the decision you recommend.
Is this an official Virtusa interview guide?
No. It is PracHub's own research and practice material for the Data Scientist role at Virtusa. Rounds and questions reflect what candidates have reported, not a process Virtusa has published, and they change over time. Confirm the current format and scope with your recruiter.
PracHub interview research ↗How difficult are the technical interviews?
The difficulty is generally considered moderate but requires a strong grasp of fundamentals. Candidates report that the interviews focus less on "trick" questions and more on your ability to apply your knowledge to practical scenarios.
PracHub interview research ↗How much preparation time is typical?
Most successful candidates dedicate 3-4 weeks to consistent study. Focus on your weaker areas, specifically brushing up on statistics and common experimentation pitfalls.
PracHub interview research ↗What differentiates successful candidates?
The ability to connect technical solutions to business value. A candidate who can explain the "why" behind their model choice will always outperform one who just knows the "how."
PracHub interview research ↗Is this a remote role?
Expectations regarding hybrid work vary by location. Please confirm the specific office policy with your recruiter during the initial screening call.
PracHub interview research ↗Sources & methodology 3 sources ↗
Official role evidence, timestamped platform data and clearly labeled preparation advice.
- 01PracHub interview research ↗
PracHub editorial research into this company and role, maintained with this guide. Candidate-reported, not an employer publication.
platform · Accessed 2026-09-22 - 02PracHub Data Scientist practice ↗
Cross-company practice questions for this role.
platform · Accessed 2026-09-22 - 03PracHub interview preparation framework ↗
The framework the preparation plan follows.
platform · Accessed 2026-09-22
Explore related engineering environments and compare the preparation focus.
1 digit technology Pvt Data Scientist Interview Questions & Guide 2026
Take-home style practice for data scientists preparing for 1 digit technology Pvt: a messy dataset, a fixed time budget, and a written analysis, reviewed for whether it states its assumptions and whether a reader could reproduce your number
Vericast Data Scientist Interview Questions & Guide 2026
Timed practice for Vericast data scientist candidates who freeze under a clock: short SQL and probability sets run end to end, then reviewed against a written rubric.
Verizon Data Scientist Interview Questions & Guide 2026
Product-sense practice for a Verizon data scientist interview: define a product and business analytics metric, pick its guardrails, and argue why a tempting alternative would mislead you.
Vetegrity Data Scientist Interview Questions & Guide 2026
A prep plan for Vetegrity data scientist candidates built on spaced review: write a full answer before opening any solution, keep a running list of the assumptions you failed to state, and repeat every missed exercise three days later inste