As a Software Engineer at Zorvyn, you are at the forefront of building scalable, high-performance systems that address complex computational challenges. You will contribute to the core infrastructure that powers our products, ensuring that our technical solutions are not only robust but also optimized for efficiency in high-stakes environments. Your work directly impacts how we manage data-heavy processes and solve intricate problems that are critical to our operational success. This role is designed for engineers who thrive on technical rigor and enjoy working on non-trivial algorithmic problems. You will be expected to translate abstract business requirements into clean, maintainable, and highly efficient code. At Zorvyn, we value engineers who possess a deep understanding of data structures, graph theory, and algorithmic complexity, as these form the foundation of our most impactful technical initiatives. ##### Tip We look for engineers who don't just solve the problem, but who can articulate the trade-offs between different architectural approaches.
Preparation focus
editorialNo round sequence has been reported for this company, so confirm the format with your recruiter and work the reported questions below.
What to demonstrate
- Breadth across the topics this company reports testing
- Whether you confirm the format before preparing for it
How to prepare
- Ask the recruiter for the sequence, the duration of each stage and whether you will be writing code
- Work the reported questions below and time yourself
PracHub editorial advice for the preparation topics above.
Think Aloud
Your interviewer is as interested in your problem-solving journey as they are in the final code. Explain your logic as you write.
Clarify Constraints
Always ask for clarification on constraints before you start coding; this shows professional maturity and attention to detail.
Optimize Early
While a working solution is the baseline, the highest marks go to candidates who identify potential optimizations during the initial design phase.
Test Your Code
Always dry-run your solution with edge cases, such as empty graphs, disconnected nodes, or single-edge scenarios.
Choose a category, try a prompt, then open its approach, worked solution or follow-up when you need it.
Implement a solution for a shortest path problem in an undirected, weighted graph with additional constraints.
Implement a solution for a shortest path problem in an undirected, weighted graph with additional constraints.
Approach
- Restate the input: its shape, its size, and what is guaranteed about it.
- Name the brute-force solution and its complexity before improving on it.
- Choose the data structure from the access pattern, not from familiarity.
- State the target complexity and say which constraint rules the naive version out.
Follow-up
- How does this change if the input no longer fits in memory?
- What is the worst case, and how likely is it on real data?
How would you approach a minimum-maximum flow problem in a complex network?
How would you approach a minimum-maximum flow problem in a complex network?
Approach
- Restate the input: its shape, its size, and what is guaranteed about it.
- Name the brute-force solution and its complexity before improving on it.
- Choose the data structure from the access pattern, not from familiarity.
- State the target complexity and say which constraint rules the naive version out.
Follow-up
- How does this change if the input no longer fits in memory?
- What is the worst case, and how likely is it on real data?
Solve variations of graph-based challenges comparable to high-difficulty coding platform problems.
Solve variations of graph-based challenges comparable to high-difficulty coding platform problems.
Approach
- Restate the input: its shape, its size, and what is guaranteed about it.
- Name the brute-force solution and its complexity before improving on it.
- Choose the data structure from the access pattern, not from familiarity.
- State the target complexity and say which constraint rules the naive version out.
Follow-up
- How does this change if the input no longer fits in memory?
- What is the worst case, and how likely is it on real data?
Given a series of weighted edges, optimize for a path that satisfies multiple conditional requirements.
Given a series of weighted edges, optimize for a path that satisfies multiple conditional requirements.
Approach
- Restate the input: its shape, its size, and what is guaranteed about it.
- Name the brute-force solution and its complexity before improving on it.
- Choose the data structure from the access pattern, not from familiarity.
- State the target complexity and say which constraint rules the naive version out.
Follow-up
- How does this change if the input no longer fits in memory?
- What is the worst case, and how likely is it on real data?
Analyze the time and space complexity of your chosen graph traversal algorithm under memory constraints.
Analyze the time and space complexity of your chosen graph traversal algorithm under memory constraints.
Approach
- Restate the input: its shape, its size, and what is guaranteed about it.
- Name the brute-force solution and its complexity before improving on it.
- Choose the data structure from the access pattern, not from familiarity.
- State the target complexity and say which constraint rules the naive version out.
Follow-up
- How does this change if the input no longer fits in memory?
- What is the worst case, and how likely is it on real data?
Stop tag and share joins from fanning out a page
resource_tag is (resource_id, tag_id) with PK (resource_id, tag_id); resource_share is (resource_id, shared_with_user_id, permission). The tagged-and-shared listing inner-joins resource to both, filters tenant_id, tag_id = ANY($2) and shared_with_user_id = $3, orders by updated_at DESC and takes 50. Pages come back with fewer than 50 distinct resources and the total in the header is far too high. Explain the row multiplication, rewrite both the page query and the count query so each is correct, and name the index each one needs. PostgreSQL 16.
Approach
- Do the arithmetic against the predicates that are actually there. An inner join emits one row per matching child row, and both joins are filtered: tag_id = ANY($2) admits only the requested tags, shared_with_user_id = $3 admits one user's share rows. So a resource holding three of the requested tags and shared with $3 once yields three rows, not one — the multiplier is its count of matching tags times its share rows for that single user, and that second factor is 1 unless the table admits duplicate (resource_id, shared_with_user_id) pairs. LIMIT 50 then limits rows rather than resources, and COUNT(*) counts pairs — the header is the product, not the population.
- Reject DISTINCT as the fix. It deduplicates after the product has been built, so the planner must materialise and sort the fanned-out set before the LIMIT can apply, and it leaves any SUM or AVG in the same select list wrong.
- Rewrite both filters as semi-joins, keeping resource as the only row source: AND EXISTS (SELECT 1 FROM resource_tag rt WHERE rt.resource_id = r.resource_id AND rt.tag_id = ANY($2)) and the same shape against resource_share. A semi-join stops at the first match per resource and preserves the driving index order, so ORDER BY updated_at DESC, resource_id DESC LIMIT 50 still stops after 50 rows.
- Count with the same predicates and no join at all: SELECT count(*) FROM resource r WHERE r.tenant_id = $1 AND r.status = 'active' AND EXISTS (...) AND EXISTS (...). Nothing multiplies a resource, so the number is the population.
Follow-up
- The filter changes from 'any of these tags' to 'all of these tags'. Rewrite it and state what it costs relative to the ANY form.
- A resource can be shared with the same user twice under different permissions. Does your count change, and should it?
Denormalise tenant onto revisions and backfill it live
resource_revision (revision_id, resource_id, version, actor_user_id, change_kind, patch, request_id, created_at) has 400M rows and no tenant column; tenant_id lives only on resource. Two reads need it: a tenant-scoped audit feed ordered by created_at DESC, and an offboarding purge. Both join back to resource today. Justify adding tenant_id to resource_revision against those two reads, name the anomaly the copy introduces and the constraint that prevents it, then give the ordered migration for a live table taking 1.2k writes/second — the lock each step takes, how the backfill is batched, and where each step stops being reversible. PostgreSQL 16.
Approach
- Justify from the access path rather than from taste. Without the column, the audit feed either scans resource_revision by created_at and discards other tenants' rows, or resolves the tenant's resource_ids first and probes with them — both proportional to the tenant's whole history rather than to one page. With (tenant_id, created_at DESC, revision_id DESC) it is a seek that stops at 50 rows, and the purge becomes a ranged delete instead of a join.
- Name the cost exactly: a second copy of a fact can disagree with the first. Make the disagreement unwritable rather than documented — add UNIQUE (resource_id, tenant_id) on resource so it can serve as a foreign-key target, then FOREIGN KEY (resource_id, tenant_id) REFERENCES resource (resource_id, tenant_id) on the revision table. A revision can then only ever carry its parent's tenant.
- Step one, expand: ALTER TABLE resource_revision ADD COLUMN tenant_id BIGINT NULL, with no default, so it is a catalogue change and no rewrite. It still needs ACCESS EXCLUSIVE for an instant, and that instant queues behind the longest open transaction on the table while every later query queues behind it — set lock_timeout to 2s and retry rather than wait.
- Step two, dual-write: deploy the writer that populates tenant_id on every new revision while reads still use the join. Reversible by redeploying the previous build, because nothing reads the column yet.
Follow-up
- The backfill is half finished and a rollback is required. What state is the table in, and what does the previous build do with a half-populated column?
- How do you verify the backfill actually finished, given rows are still being inserted while it runs?
Keep one tenant's bulk export from starving projection updates
The worker fleet runs about 600 jobs/second out of job_run, claimed under a lease and heartbeated while running. Most handlers finish under 200 ms; exports run for minutes. One tenant enqueues 50,000 exports. Design the scheduling so that tenant's exports slow down and nothing else does: the queue split, the concurrency caps and where they are enforced, the claim query, and the backpressure signal that stops accepting new work. State the in-flight worker count each class needs at its arrival rate, and what the cap costs the tenant that hits it.
Approach
- Do the concurrency arithmetic first, because it determines the pool shapes. Required in-flight work is arrival rate times service time: 600/second of 200 ms handlers needs about 120 workers, while one export per second at 180 seconds needs 180 on its own. The long tail dominates any pool it shares, so a single pool sized from the mean is consumed by exports while 50 ms projections queue behind them. That is head-of-line blocking, and adding capacity does not fix it because the ratio is what is wrong.
- Split by job class rather than by priority. Priority inside one pool still lets a running export hold its worker for the next four minutes - there is no preemption for a handler already executing. Separate queues and separate worker processes give each class a floor the other cannot take.
- Enforce the per-tenant cap inside the claim, not at enqueue. Claim with SELECT ... WHERE status='queued' AND run_after <= now() AND job_type=$1 ORDER BY run_after, job_run_id FOR UPDATE SKIP LOCKED LIMIT 1, restricted to tenants currently under their cap. Derive the running count from rows in status 'running' with a live lease rather than from a counter incremented at claim and decremented at completion: the derived count self-heals when a worker dies, and the counter leaks a slot every time one does.
- Make the ordering fair over tenants instead of over jobs. Strict FIFO with a cap still forces the claim to scan past 50,000 rows belonging to a capped tenant before it finds anyone else's work, so cost grows with backlog depth. Pick the tenant first from a small per-tenant queue-depth summary, then claim within that tenant, which makes the scan proportional to the number of active tenants instead.
Follow-up
- An export outruns its lease, so two copies run. What must the handler do to make the second copy harmless, and what does it write to guarantee that?
- With a cap of 4, the tenant's 50,000 exports now take hours. What do you tell them, and does the answer change if they are the largest tenant on the platform?
Choose what to break when replication lag reaches forty seconds
Reads are served from two replicas: 14k requests/second, about 85% absorbed by cache, so roughly 2.1k reads/second reach the database. Writes go to the primary at 1.2k/second. A tenant's backfill drives replication lag from under 100 ms to 40 seconds and it is still climbing. Sessions that have just written are pinned to the primary. Decide, endpoint class by endpoint class, whether to serve stale, fail, or route to the primary, and justify each choice with the load it adds to the primary. Then state what you would have built beforehand.
Approach
- Establish blast radius before cause, because mitigation and diagnosis have different deadlines. The decisive arithmetic is what happens if the database reads move to the primary: 2.1k reads/second on top of 1.2k writes/second roughly triples its operation count, on the node already absorbing the backfill that caused this. Reads and writes are not equal in cost, so treat that as an argument against a blanket move rather than as a capacity model - but it is enough to rule out routing everything to the primary.
- Classify endpoints by what staleness costs, not by how important they feel. Reads whose staleness is invisible - listings, search, counters - stay on the replica and return the watermark so the client can tell. Reads that immediately follow that same session's write keep their primary pin, which is a small bounded slice of traffic rather than the whole 2.1k/second. Reads that feed a decision with a side effect - authorisation, quota, the read half of a read-modify-write - must not be stale at all, because a 40-second-old permission row is the stale-permission failure wearing a different costume; those go to the primary or fail.
- Shed instead of queueing. If the must-be-fresh class alone exceeds the primary's headroom, refuse its lowest-value slice with 503 and a retry-after. A request queued behind a saturated primary holds a connection for a client that has already given up, and the retry storm that follows is what turns degradation into an outage. Bound the connection pool per role so the read fallback cannot consume the write path's connections - that bulkhead is the single decision that determines whether writes survive the next ten minutes.
- Attack the cause in parallel, since it is the one thing that can be stopped. The backfill is the load generator. A backfill that reads replication lag as its throttle signal and pauses above a threshold would have made this a non-event, with batch sizes small enough that each batch's write volume is a fraction of what a replica can apply per second. That is most of the answer to what should have existed beforehand.
Follow-up
- Lag returns to normal in nine minutes. Which mitigation do you remove first, and which one stays permanently?
- A user reports their change did not save, and the write committed. Trace the path that produces that report and name the signal that would have shown it before the report arrived.
Read latency spikes on a sixty-second sawtooth
The cached listing read path serves about 14k reads/second at an 85% hit rate. p99 sits at 35 ms for 57 seconds, jumps to 900 ms for 3, and repeats. During each spike the primary shows several hundred identical listing queries starting within the same millisecond, all carrying one large tenant's id. Cache entries use a 60-second TTL. Give the mechanism, the ordered checks, the fix, and the correctness hazard your fix must not introduce.
Approach
- Match the period to a configured number before theorising about load. A spike every 60 seconds against a 60-second TTL is an entry expiring, and you confirm it by correlating spike timestamps with the entry's write time rather than with the traffic curve. If the period had matched a cron or a GC interval instead, this is a different investigation.
- Establish the concurrency of the miss. Several hundred identical queries in one millisecond means the miss path has no coalescing: every request that arrives between expiry and repopulation recomputes. The herd size is that key's arrival rate times its recompute time, so at 1.2k reads/second for the hot key and a 250 ms recompute you expect about 300 concurrent misses, which matches what is observed.
- Add single-flight on the miss path so one caller per key recomputes under a short-lived lock while the rest wait for its result. Prefer stale-while-revalidate where the read tolerates it: return the expired value immediately and refresh asynchronously, which removes the latency spike rather than serialising it into a queue of waiters.
- De-synchronise the keys. Write TTLs with jitter, for example 60 seconds plus or minus 10%, so a deploy or a mass invalidation does not align every key on the same second and turn a per-key herd into a fleet-wide one.
Follow-up
- The same sawtooth appears on a key that is invalidated on write rather than expired. Is that the same bug?
- How does your answer change if the recompute takes 4 seconds instead of 250 ms?
Built from the topics and questions Zorvyn candidates report; no round sequence has been reported.
Prepare, practise & reflect
One practical outcome each day. Spend longer where you need it.
0 / 7 done01Establish the Zorvyn format
- No round sequence has been reported, so ask your recruiter for the sequence, the duration of each stage and whether you will write code.
Deliverable: A written reply from your recruiter confirming the format.
02Work Graph Algorithms
- Spend the session on Graph Algorithms, which Zorvyn candidates report being tested on.
- Write one worked example in Graph Algorithms and time yourself on it.
Deliverable: One timed worked example in Graph Algorithms.
03Work Shortest Path Algorithms
- Spend the session on Shortest Path Algorithms, which Zorvyn candidates report being tested on.
- Write one worked example in Shortest Path Algorithms and time yourself on it.
Deliverable: One timed worked example in Shortest Path Algorithms.
04Work Shortest Path with Constraints
- Spend the session on Shortest Path with Constraints, which Zorvyn candidates report being tested on.
- Write one worked example in Shortest Path with Constraints and time yourself on it.
Deliverable: One timed worked example in Shortest Path with Constraints.
05Answer out loud: Problem Solving & Algorithms
- Answer aloud, timed: Implement a solution for a shortest path problem in an undirected, weighted graph with additional constraints.
- Answer aloud, timed: How would you approach a minimum-maximum flow problem in a complex network?
Deliverable: Spoken answers to 2 reported Problem Solving & Algorithms question(s), under time.
06Rehearse your own examples
- Prepare three examples from your own work where you made the decision, each with the outcome you can quantify.
Deliverable: Three examples written out, each with a number attached.
07Dry run for Zorvyn
- Run one full mock under time, then write down the two questions you most want to ask your interviewers.
Deliverable: A completed timed mock and two questions to ask.
Expand any day for tasks and deliverables. Your progress is saved on this device.
Behavioural rounds judge the decision you made and what it cost.
Narrate an outage you owned from page to postmortem
Pick an incident you personally drove, ideally one where writes were affected rather than reads. In six to eight minutes: state the symptom as it first appeared on a dashboard, the blast radius you established before you knew the cause, the mitigation you applied and when, the mechanism you eventually proved, and the follow-up that would prevent a repeat. Bring numbers: error rate, tenants affected, minutes to mitigate, minutes to resolve. If you cannot name what you measured, choose a different incident.
Approach
- Open on the signal rather than the cause: which metric at which percentile moved, on which service, at what time, so the listener follows the same evidence you had rather than a conclusion you already reached.
- Separate mitigation from diagnosis out loud. State what you did to stop the bleeding (flag off, shed traffic, drain a lease, roll back a deploy) and say plainly that you did it before the mechanism was known, because those are two jobs with different deadlines.
- Establish blast radius in countable terms: how many tenants, how many writes, and crucially whether the effect was loss or only delay. An append-only revision table or a pending outbox row means the change survived and the projection was merely behind, which is a repair rather than a data-loss incident.
- Prove the mechanism instead of asserting it. Name the trace span that grew, the plan that flipped to a sequential scan, the lease that expired, plus one alternative you ruled out and the signal that stayed flat while you ruled it out.
Follow-up
- What would you do differently in the first five minutes, given the same dashboard and no more information?
- Which follow-up action did you deliberately not take, and why was dropping it the right call?
Turn a code review disagreement into a decision
A colleague's change updates a row with UPDATE resource SET version = version + 1 WHERE resource_id = $1 AND version = $2 and treats an affected-row count of zero as a successful no-op. You read that as a silently lost update; they think returning 200 is friendlier to clients than returning a conflict. Describe how you have handled a review disagreement of this shape: what goes in the comment, when you leave the thread, and who decides. Then write the comment you would leave here, in under 80 words.
Approach
- Sort the disagreement before writing anything. A silently discarded write is a correctness claim about data; the choice between 409 and 412 is taste. Only the first justifies blocking a merge, and saying which one you are doing is most of the value of the comment.
- Make the claim reproducible in the comment itself with an interleaving rather than a principle: A reads version 7, B reads version 7, B commits version 8, A's predicate matches zero rows, A is told it succeeded and A's edit is gone.
- Offer the alternative with its cost attached: return 409 carrying the current version and the revision that won, so the client can re-read and re-apply. Note that automatic retry is not the fix, because a retry re-reads the winner's state and reapplies an intent formed against data that no longer exists.
- Apply an escalation rule you can state: two round trips on the thread, then a call, and the service's owner decides rather than the reviewer. A reviewer who cannot be overruled is a bottleneck with extra steps.
Follow-up
- Where would you put the test that fails if someone reintroduces the swallowed zero rowcount?
- The author says clients cannot handle a 409. How do you check whether that is true?
Argue against a design, lose, and commit anyway
Describe a design you argued against and lost. State the failure you predicted as a named mechanism, not a feeling about complexity: two services that would need one transaction, a projection with no rebuild path, a write path with no idempotency key. Say what evidence you brought, what the decision maker weighed instead, and what you did after the decision was made: what you instrumented, what you wrote down, and whether the prediction came true. Five minutes.
Approach
- State the prediction in falsifiable form up front: the mechanism, the condition that triggers it, and the observable outcome. A prediction that cannot be checked also cannot be credited to you later.
- Show the evidence you had at the time and label each piece honestly as measured, analogous, or intuition. Keeping the intuition is fine; disguising it as data is the thing that erodes your standing in the next argument.
- Represent the opposing case at full strength, including the constraint you did not control: a fixed date, a team boundary, or the fact that the decision was cheap to reverse and yours was not.
- Make disagree-and-commit concrete. Name the artefact you left behind so the prediction could be settled without you: the alert and its threshold, the counter on the dashboard, the decision note that recorded the trade-off and the condition that would revisit it.
Follow-up
- What threshold on that alert would have proved you right, and did anyone ever look at it?
- If the same proposal arrived tomorrow with the same deadline, would you argue it the same way?
- 01
Pick an incident you personally drove, ideally one where writes were affected rather than reads. In six to eight minutes: state the symptom as it first appeared on a dashboard, the blast radius you established before you knew the cause, the mitigation you applied and when, the mechanism you eventually proved, and the follow-up that would prevent a repeat. Bring numbers: error rate, tenants affected, minutes to mitigate, minutes to resolve. If you cannot name what you measured, choose a different incident.
- 02
A colleague's change updates a row with UPDATE resource SET version = version + 1 WHERE resource_id = $1 AND version = $2 and treats an affected-row count of zero as a successful no-op. You read that as a silently lost update; they think returning 200 is friendlier to clients than returning a conflict. Describe how you have handled a review disagreement of this shape: what goes in the comment, when you leave the thread, and who decides. Then write the comment you would leave here, in under 80 words.
- 03
Describe a design you argued against and lost. State the failure you predicted as a named mechanism, not a feeling about complexity: two services that would need one transaction, a projection with no rebuild path, a write path with no idempotency key. Say what evidence you brought, what the decision maker weighed instead, and what you did after the decision was made: what you instrumented, what you wrote down, and whether the prediction came true. Five minutes.
How difficult are the coding rounds?
Expect high-level, challenging problems that often mirror the difficulty of the most demanding competitive programming tasks. Focus on efficiency and edge-case handling.
Zorvyn Software Engineer candidate reports ↗How much time should I spend preparing?
We recommend dedicating at least 3–4 weeks of focused practice on data structures and graph algorithms, specifically targeting high-difficulty problems.
Zorvyn Software Engineer candidate reports ↗Is the culture collaborative or competitive?
While our interviews are rigorous, we value candidates who can communicate their thought process clearly and work through challenges in an iterative, collaborative manner.
Zorvyn Software Engineer candidate reports ↗What is the primary focus of the technical screen?
The screen is designed to filter for fundamental algorithmic strength, specifically testing your ability to handle constraints within graph-based problems.
Zorvyn Software Engineer candidate reports ↗What topics does Zorvyn test in interviews?
Zorvyn interviews most often cover Graph Algorithms, Shortest Path Algorithms, Shortest Path with Constraints, Data Structures (DSA), and State Augmentation / Constraint Modeling. The exact emphasis depends on the specific role you apply for.
Zorvyn Software Engineer candidate reports ↗Sources & methodology 3 sources ↗
No official company page is cited. Rounds and questions come from candidate reports and PracHub editorial material; each source shows the date it was read.
- 01Zorvyn Software Engineer candidate reports ↗
Company-reported rounds, questions and FAQ.
Candidate reports · Accessed 2026-09-22 - 02PracHub Software Engineer practice ↗
PracHub practice material, not company-reported.
PracHub page · Accessed 2026-09-22 - 03PracHub preparation framework ↗
PracHub preparation guidance.
PracHub page · Accessed 2026-09-22
Explore related engineering environments and compare the preparation focus.
Cognition Software Engineer Interview Guide
What Cognition asks Software Engineer candidates, from reported rounds and questions.
Vercel Software Engineer Interview Guide
Debugging practice for Vercel software engineer prep built on a reproduction you trust, narrowing to the smallest failing input, and changing one variable per run so the result stays attributable.
Together Ai Software Engineer Interview Guide
Failure-handling practice for Together Ai software engineer candidates: requests whose outcome a timeout leaves unknown, where a retry is safe, and deduplicating at the receiver instead of assuming exactly-once delivery.
Spotify Software Engineer Interview Guide
Timed practice for Spotify software engineer candidates who lose time to the clock: short problems taken end to end, then reviewed against a written rubric rather than a passing test run.